-
Tunable frequency conversion in doped photonic crystal fiber pumped near degeneracy
Authors:
Leah R Murphy,
Mateusz J Olszewski,
Petros Androvitsaneas,
Miguel Alvarez Perez,
Will A M Smith,
Anthony J Bennett,
Peter J Mosley,
Alex O C Davis
Abstract:
Future quantum networks will rely on the ability to coherently transfer optically encoded quantum information between different wavelength bands. Bragg-scattering four-wave mixing in optical fiber is a promising route to achieving this, but requires fibers with precise dispersion control and broadband transmission at signal, target and pump wavelengths. Here we introduce a photonic crystal fiber w…
▽ More
Future quantum networks will rely on the ability to coherently transfer optically encoded quantum information between different wavelength bands. Bragg-scattering four-wave mixing in optical fiber is a promising route to achieving this, but requires fibers with precise dispersion control and broadband transmission at signal, target and pump wavelengths. Here we introduce a photonic crystal fiber with a germanium-doped core featuring group velocity matching at 1550 nm, the telecoms C-band, and 920 nm, within the emission range of efficient single photon sources based on InAs quantum dots. With low chromatic walk-off and good optical guidance even at long wavelengths, large lengths of this fiber are used to achieve nanometer-scale frequency shifts between wavelengths around 920 nm with up to 79.4\% internal conversion efficiency, allowing dissimilar InAs dots to be interfaced. We also show how cascading this frequency conversion can be used to generate a frequency comb away from telecoms wavelengths. Finally, we use the fiber to demonstrate tunable frequency conversion of weak classical signals around 918 nm to the telecoms C-band.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
A Practical Guide to Transcranial Ultrasonic Stimulation from the IFCN-endorsed ITRUSST Consortium
Authors:
Keith R Murphy,
Tulika Nandi,
Benjamin Kop,
Takahiro Osada,
W Apoutou N'D**,
Maximilian Lueckel,
Kevin A Caulfield,
Anton Fomenko,
Hartwig R Siebner,
Yoshikazu Ugawa,
Lennart Verhagen,
Sven Bestmann,
Eleanor Martin,
Kim Butts Pauly,
Elsa Fouragnan,
Til Ole Bergmann
Abstract:
Low-intensity Transcranial Ultrasonic Stimulation (TUS) is a non-invasive brain stimulation technique enabling cortical and deep brain targeting with unprecedented spatial accuracy. Given the high rate of adoption by new users with varying levels of expertise and interdisciplinary backgrounds, practical guidelines are needed to ensure state-of-the-art TUS application and reproducible outcomes. The…
▽ More
Low-intensity Transcranial Ultrasonic Stimulation (TUS) is a non-invasive brain stimulation technique enabling cortical and deep brain targeting with unprecedented spatial accuracy. Given the high rate of adoption by new users with varying levels of expertise and interdisciplinary backgrounds, practical guidelines are needed to ensure state-of-the-art TUS application and reproducible outcomes. Therefore, the International Transcranial Ultrasonic Stimulation Safety and Standards (ITRUSST) consortium has formed a subcommittee, endorsed by the International Federation of Clinical Neurophysiology (IFCN), to develop recommendations for best practice in TUS applications in humans. The practical guide presented here provides a brief introduction into ultrasound physics and sonication parameters. It explains the requirements of TUS lab equipment and transducer selection and discusses experimental design and procedures alongside potential confounds and control conditions. Finally, the guide elaborates on essential steps of application planning for stimulation safety and efficacy, as well as considerations when combining TUS with neuroimaging, electrophysiology, or other brain stimulation techniques. We hope that this practical guide to TUS will assist both novice and experienced users in planning and conducting high-quality studies and provide a solid foundation for further advancements in this promising field.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Understanding and Modeling the Dynamics of Storm-time Atmospheric Neutral Density using Random Forests
Authors:
Kyle R. Murphy,
Alexa J. Halford,
Vivian Liu,
Jeffery Klenzing,
Jonathon Smith,
Katherine Garcia-Sage,
Joshua Pettit,
I. Jonathan Rae
Abstract:
Atmospheric neutral density is a crucial component to accurately predict and track the motion of satellites. During periods of elevated solar and geomagnetic activity atmospheric neutral density becomes highly variable and dynamic. This variability and enhanced dynamics make it difficult to accurately model neutral density leading to increased errors which propagate from neutral density models thr…
▽ More
Atmospheric neutral density is a crucial component to accurately predict and track the motion of satellites. During periods of elevated solar and geomagnetic activity atmospheric neutral density becomes highly variable and dynamic. This variability and enhanced dynamics make it difficult to accurately model neutral density leading to increased errors which propagate from neutral density models through to orbit propagation models. In this paper we investigate the dynamics of neutral density during geomagnetic storms. We use a combination of solar and geomagnetic variables to develop three Random Forest machine learning models of neutral density. These models are based on (1) slow solar indices, (2) high cadence solar irradiance, and (3) combined high-cadence solar irradiance and geomagnetic indices. Each model is validated using an out-of-sample dataset using analysis of residuals and typical metrics. During quiet-times, all three models perform well; however, during geomagnetic storms, the combined high cadence solar irradiance/geomagnetic model performs significantly better than the models based solely on solar activity. The combined model capturing an additional 10\% in the variability of density and having an error up to six times smaller during geomagnetic storms then the solar models. Overall, this work demonstrates the importance of including geomagnetic activity in the modeling of atmospheric density and serves as a proof of concept for using machine learning algorithms to model, and in the future forecast atmospheric density for operational use.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
A scalable cavity-based spin-photon interface in a photonic integrated circuit
Authors:
Kevin C. Chen,
Ian Christen,
Hamza Raniwala,
Marco Colangelo,
Lorenzo De Santis,
Katia Shtyrkova,
David Starling,
Ryan Murphy,
Linsen Li,
Karl Berggren,
P. Benjamin Dixon,
Matthew Trusheim,
Dirk Englund
Abstract:
A central challenge in quantum networking is transferring quantum states between different physical modalities, such as between flying photonic qubits and stationary quantum memories. One implementation entails using spin-photon interfaces that combine solid-state spin qubits, such as color centers in diamond, with photonic nanostructures. However, while high-fidelity spin-photon interactions have…
▽ More
A central challenge in quantum networking is transferring quantum states between different physical modalities, such as between flying photonic qubits and stationary quantum memories. One implementation entails using spin-photon interfaces that combine solid-state spin qubits, such as color centers in diamond, with photonic nanostructures. However, while high-fidelity spin-photon interactions have been demonstrated on isolated devices, building practical quantum repeaters requires scaling to large numbers of interfaces yet to be realized. Here, we demonstrate integration of nanophotonic cavities containing tin-vacancy (SnV) centers in a photonic integrated circuit (PIC). Out of a six-channel quantum micro-chiplet (QMC), we find four coupled SnV-cavity devices with an average Purcell factor of ~7. Based on system analyses and numerical simulations, we find with near-term improvements this multiplexed architecture can enable high-fidelity quantum state transfer, paving the way towards building large-scale quantum repeaters.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Development of a Boston-area 50-km fiber quantum network testbed
Authors:
Eric Bersin,
Matthew Grein,
Madison Sutula,
Ryan Murphy,
Yan Qi Huan,
Mark Stevens,
Aziza Suleymanzade,
Catherine Lee,
Ralf Riedinger,
David J. Starling,
Pieter-Jan Stas,
Can M. Knaut,
Neil Sinclair,
Daniel R. Assumpcao,
Yan-Cheng Wei,
Erik N. Knall,
Bartholomeus Machielse,
Denis D. Sukachev,
David S. Levonian,
Mihir K. Bhaskar,
Marko Lončar,
Scott Hamilton,
Mikhail Lukin,
Dirk Englund,
P. Benjamin Dixon
Abstract:
Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Bo…
▽ More
Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Boston-Area Quantum Network (BARQNET) telecom fiber testbed, measuring the time-of-flight, polarization, and phase noise imparted on transmitted signals. We further design and demonstrate a compensation system that is both resilient to these noise sources and compatible with integration of emerging quantum memory components on the deployed link. These results have utility for future work on the BARQNET as well as other quantum network testbeds in development, enabling near-term quantum networking demonstrations and informing what areas of technology development will be most impactful in advancing future system capabilities.
△ Less
Submitted 5 January, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Telecom networking with a diamond quantum memory
Authors:
Eric Bersin,
Madison Sutula,
Yan Qi Huan,
Aziza Suleymanzade,
Daniel R. Assumpcao,
Yan-Cheng Wei,
Pieter-Jan Stas,
Can M. Knaut,
Erik N. Knall,
Carsten Langrock,
Neil Sinclair,
Ryan Murphy,
Ralf Riedinger,
Matthew Yeh,
C. J. Xin,
Saumil Bandyopadhyay,
Denis D. Sukachev,
Bartholomeus Machielse,
David S. Levonian,
Mihir K. Bhaskar,
Scott Hamilton,
Hongkun Park,
Marko Lončar,
Martin M. Fejer,
P. Benjamin Dixon
, et al. (2 additional authors not shown)
Abstract:
Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy…
▽ More
Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy (SiV) center in diamond to the telecom O-band, maintaining low noise ($g^2(0)<0.1$) and high indistinguishability ($V=89\pm8\%$). We further demonstrate the utility of this system for quantum networking by converting telecom-band time-bin pulses, sent across a lossy and noisy 50 km deployed fiber link, to the visible band and map** their quantum states onto a diamond quantum memory with fidelity $\mathcal{F}=87\pm 2.5 \% $. These results demonstrate the viability of SiV quantum memories integrated with telecom-band systems for scalable quantum networking applications.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
On the origin of hard X-ray emissions from the behind-the-limb flare on 2014 September 1
Authors:
Yihong Wu,
Alexis P. Rouillard,
Athanasios Kouloumvakos,
Rami Vainio,
Alexandr N. Afanasiev,
Illya Plotnikov,
Ronald J. Murphy,
Gottfried J. Mann,
Alexander Warmuth
Abstract:
The origin of hard X-rays and gamma-rays emitted from the solar atmosphere during occulted solar flares is still debated. The hard X-ray emissions could come from flaring loop tops rising above the limb or Coronal Mass Ejections (CME) shock waves, two by-products of energetic solar storms. For the shock scenario to work, accelerated particles must be released on magnetic field lines rooted on the…
▽ More
The origin of hard X-rays and gamma-rays emitted from the solar atmosphere during occulted solar flares is still debated. The hard X-ray emissions could come from flaring loop tops rising above the limb or Coronal Mass Ejections (CME) shock waves, two by-products of energetic solar storms. For the shock scenario to work, accelerated particles must be released on magnetic field lines rooted on the visible disk and precipitate. We present a new Monte Carlo code that computes particle acceleration at shocks propagating along large coronal magnetic loops. A first implementation of the model is carried out for the 2014 September 1 event and the modeled electron spectra are compared with those inferred from Fermi Gamma-ray Burst Monitor (GBM) measurements. When particle diffusion processes are invoked our model can reproduce the hard electron spectra measured by GBM nearly ten minutes after the estimated on-disk hard X-rays appear to have ceased from the flare site.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Search for Slow Magnetic Monopoles with the NOvA Detector on the Surface
Authors:
NOvA Collaboration,
M. A. Acero,
P. Adamson,
L. Aliaga,
T. Alion,
V. Allakhverdian,
N. Anfimov,
A. Antoshkin,
E. Arrieta-Diaz,
L. Asquith,
A. Aurisano,
A. Back,
C. Backhouse,
M. Baird,
N. Balashov,
P. Baldi,
B. A. Bambah,
S. Bashar,
K. Bays,
S. Bending,
R. Bernstein,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
J. Blair
, et al. (174 additional authors not shown)
Abstract:
We report a search for a magnetic monopole component of the cosmic-ray flux in a 95-day exposure of the NOvA experiment's Far Detector, a 14 kt segmented liquid scintillator detector designed primarily to observe GeV-scale electron neutrinos. No events consistent with monopoles were observed, setting an upper limit on the flux of $2\times 10^{-14} \mathrm{cm^{-2}s^{-1}sr^{-1}}$ at 90% C.L. for mon…
▽ More
We report a search for a magnetic monopole component of the cosmic-ray flux in a 95-day exposure of the NOvA experiment's Far Detector, a 14 kt segmented liquid scintillator detector designed primarily to observe GeV-scale electron neutrinos. No events consistent with monopoles were observed, setting an upper limit on the flux of $2\times 10^{-14} \mathrm{cm^{-2}s^{-1}sr^{-1}}$ at 90% C.L. for monopole speed $6\times 10^{-4} < β< 5\times 10^{-3}$ and mass greater than $5\times 10^{8}$ GeV. Because of NOvA's small overburden of 3 meters-water equivalent, this constraint covers a previously unexplored low-mass region.
△ Less
Submitted 5 January, 2021; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Supernova neutrino detection in NOvA
Authors:
NOvA Collaboration,
M. A. Acero,
P. Adamson,
G. Agam,
L. Aliaga,
T. Alion,
V. Allakhverdian,
N. Anfimov,
A. Antoshkin,
E. Arrieta-Diaz,
L. Asquith,
A. Aurisano,
A. Back,
C. Backhouse,
M. Baird,
N. Balashov,
P. Baldi,
B. A. Bambah,
S. Bashar,
K. Bays,
S. Bending,
R. Bernstein,
V. Bhatnagar,
B. Bhuyan,
J. Bian
, et al. (177 additional authors not shown)
Abstract:
The NOvA long-baseline neutrino experiment uses a pair of large, segmented, liquid-scintillator calorimeters to study neutrino oscillations, using GeV-scale neutrinos from the Fermilab NuMI beam. These detectors are also sensitive to the flux of neutrinos which are emitted during a core-collapse supernova through inverse beta decay interactions on carbon at energies of…
▽ More
The NOvA long-baseline neutrino experiment uses a pair of large, segmented, liquid-scintillator calorimeters to study neutrino oscillations, using GeV-scale neutrinos from the Fermilab NuMI beam. These detectors are also sensitive to the flux of neutrinos which are emitted during a core-collapse supernova through inverse beta decay interactions on carbon at energies of $\mathcal{O}(10~\text{MeV})$. This signature provides a means to study the dominant mode of energy release for a core-collapse supernova occurring in our galaxy. We describe the data-driven software trigger system developed and employed by the NOvA experiment to identify and record neutrino data from nearby galactic supernovae. This technique has been used by NOvA to self-trigger on potential core-collapse supernovae in our galaxy, with an estimated sensitivity reaching out to 10~kpc distance while achieving a detection efficiency of 23\% to 49\% for supernovae from progenitor stars with masses of 9.6M$_\odot$ to 27M$_\odot$, respectively.
△ Less
Submitted 29 July, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Evidence for a Coronal Shock Wave Origin for Relativistic Protons Producing Solar Gamma-Rays and Observed by Neutron Monitors at Earth
Authors:
Athanasios Kouloumvakos,
Alexis P. Rouillard,
Gerald H. Share,
Illya Plotnikov,
Ronald Murphy,
Athanasios Papaioannou,
Yihong Wu
Abstract:
We study the solar eruptive event on 2017 September 10 that produced long-lasting $>$100 MeV $γ$-ray emission and a ground level enhancement (GLE72). The origin of the high-energy ions producing late-phase gamma-ray emission (LPGRE) is still an open question, but a possible explanation is proton acceleration at coronal shocks produced by coronal mass ejections. We examine a common shock accelerati…
▽ More
We study the solar eruptive event on 2017 September 10 that produced long-lasting $>$100 MeV $γ$-ray emission and a ground level enhancement (GLE72). The origin of the high-energy ions producing late-phase gamma-ray emission (LPGRE) is still an open question, but a possible explanation is proton acceleration at coronal shocks produced by coronal mass ejections. We examine a common shock acceleration origin for both the LPGRE and GLE72. The $γ$-ray emission observed by the Fermi-Large Area Telescope exhibits a weak impulsive phase, consistent with that observed in hard X-and $γ$-ray line flare emissions, and what appear to be two distinct stages of LPGRE. From a detailed modeling of the shock wave, we derive the 3D distribution and temporal evolution of the shock parameters, and we examine the shock wave magnetic connection with the visible solar disk. The evolution of shock parameters on field lines returning to the visible disk, mirrors the two stages of LPGRE. We find good agreement between the time history of $>$100 MeV $γ$-rays and one produced by a basic shock acceleration model. The time history of shock parameters magnetically mapped to Earth agrees with the rates observed by the Fort Smith neutron monitor during the first hour of the GLE72 if we include a 30% contribution of flare-accelerated protons during the first 10 minutes, having a release time following the time history of nuclear $γ$-rays. Our analysis provides compelling evidence for a common shock origin for protons producing the LPGRE and most of the particles observed in GLE72.
△ Less
Submitted 15 April, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
Broadband Optical Detection using the Spin Seebeck Effect
Authors:
Subash Kattel,
Joseph R. Murphy,
David Ellsworth,
**jun Ding,
Tao Liu,
Peng Li,
Mingzhong Wu,
William D. Rice
Abstract:
The generation, control, and detection of spin currents in solid-state devices are critical for Joule-heating minimization, spin-based computation, and electrical energy generation from thermal gradients. Although incorporation of spin functionality into technologically important architectures is still in its infancy, advantages over all-electric devices are increasingly becoming clear. Here, we u…
▽ More
The generation, control, and detection of spin currents in solid-state devices are critical for Joule-heating minimization, spin-based computation, and electrical energy generation from thermal gradients. Although incorporation of spin functionality into technologically important architectures is still in its infancy, advantages over all-electric devices are increasingly becoming clear. Here, we utilize the spin Seebeck effect (SSE) in Pt/Y3Fe5O12 devices to detect light from 390 to 2200 nm. We find the device responsivity is remarkably flat across this technologically important wavelength range, closely following the Pt absorption coefficient. As expected from a SSE-generation mechanism, we observe that the photovoltage and Pt heating dynamics are in strong agreement. To precisely determine the optically created thermal gradient produced from a point-like heat source, we introduce a field-modulation method for measuring the SSE. Our results show broadband optical detection can be performed with devices based solely on spin current generation and detection.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Context-Enriched Identification of Particles with a Convolutional Network for Neutrino Events
Authors:
F. Psihas,
E. Niner,
M. Groh,
R. Murphy,
A. Aurisano,
A. Himmel,
K. Lang,
M. D. Messier,
A. Radovic,
A. Sousa
Abstract:
Particle detectors record the interactions of subatomic particles and their passage through matter. The identification of these particles is necessary for in-depth physics analysis. While particles can be identified by their individual behavior as they travel through matter, the full context of the interaction in which they are produced can aid the classification task substantially. We have develo…
▽ More
Particle detectors record the interactions of subatomic particles and their passage through matter. The identification of these particles is necessary for in-depth physics analysis. While particles can be identified by their individual behavior as they travel through matter, the full context of the interaction in which they are produced can aid the classification task substantially. We have developed the first convolutional neural network for particle identification which uses context information. This is also the first implementation of a four-tower siamese-type architecture both for separation of independent inputs and inclusion of context information. The network classifies clusters of energy deposits from the NOvA neutrino detectors as electrons, muons, photons, pions, and protons with an overall efficiency and purity of 83.3% and 83.5%, respectively. We show that providing the network with context information improves performance by comparing our results with a network trained without context information.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Observation of seasonal variation of atmospheric multiple-muon events in the NOvA Near Detector
Authors:
M. A. Acero,
P. Adamson,
L. Aliaga,
T. Alion,
V. Allakhverdian,
S. Altakarli,
N. Anmov,
A. Antoshkin,
A. Aurisano,
A. Back,
C. Backhouse,
M. Baird,
N. Balashov,
P. Baldi,
B. A. Bambah,
S. Bashar,
K. Bays,
S. Bending,
R. Bernstein,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
J. Blair,
A. C. Booth,
P. Bour
, et al. (166 additional authors not shown)
Abstract:
Using two years of data from the NOvA Near Detector at Fermilab, we report a seasonal variation of cosmic ray induced multiple-muon event rates which has an opposite phase to the seasonal variation in the atmospheric temperature. The strength of the seasonal multipl$ increase as a function of the muon multiplicity. However, no significant dependence of the strength of the seasonal variation of the…
▽ More
Using two years of data from the NOvA Near Detector at Fermilab, we report a seasonal variation of cosmic ray induced multiple-muon event rates which has an opposite phase to the seasonal variation in the atmospheric temperature. The strength of the seasonal multipl$ increase as a function of the muon multiplicity. However, no significant dependence of the strength of the seasonal variation of the multiple-muon variation is seen as a function of the muon zenith angle, or the spatial or angular separation between the correlated muons.
△ Less
Submitted 8 July, 2019; v1 submitted 29 April, 2019;
originally announced April 2019.
-
Tunable Giant Exchange Bias in an Intercalated Transition Metal Dichalcogenide
Authors:
Spencer Doyle,
Caolan John,
Eran Maniv,
Ryan A. Murphy,
Ariel Maniv,
Sanath K. Ramakrishna,
Yun-Long Tang,
Ramamoorthy Ramesh,
Jeffrey R. Long,
Arneil P. Reyes,
James G. Analytis
Abstract:
The interplay of symmetry and quenched disorder leads to some of the most fundamentally interesting and technologically important properties of correlated materials. It also poses the most vexing of theoretical challenges. Nowhere is this more apparent than in the study of spin glasses. A spin glass is characterized by an ergodic landscape of states - an innumerable number of possibilities that ar…
▽ More
The interplay of symmetry and quenched disorder leads to some of the most fundamentally interesting and technologically important properties of correlated materials. It also poses the most vexing of theoretical challenges. Nowhere is this more apparent than in the study of spin glasses. A spin glass is characterized by an ergodic landscape of states - an innumerable number of possibilities that are only weakly distinguished energetically, if at all. We show in the material Fe$_x$NbS$_2$, this landscape of states can be biased by coexisitng antiferromagnetic order. This process leads to a phenomenon of broad technological importance: giant, tunable exchange bias. We observe exchange biases that exceed those of conventional materials by more than two orders of magnitude. This work illustrates a novel route to giant exchange bias by leveraging the interplay of frustration and disorder in exotic materials.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
A competitive binding model predicts nonlinear responses of olfactory receptors to complex mixtures
Authors:
Vijay Singh,
Nicolle R. Murphy,
Vijay Balasubramanian,
Joel D. Mainland
Abstract:
In color vision, the quantitative rules for mixing lights to make a target color are well understood. By contrast, the rules for mixing odorants to make a target odor remain elusive. A solution to this problem in vision relied on characterizing receptor responses to different wavelengths of light and subsequently relating these responses to perception. In olfaction, experimentally measuring recept…
▽ More
In color vision, the quantitative rules for mixing lights to make a target color are well understood. By contrast, the rules for mixing odorants to make a target odor remain elusive. A solution to this problem in vision relied on characterizing receptor responses to different wavelengths of light and subsequently relating these responses to perception. In olfaction, experimentally measuring receptor responses to a representative set of complex mixtures is intractable due to the vast number of possibilities. To meet this challenge, we develop a biophysical model that predicts mammalian receptor responses to complex mixtures using responses to single odorants. The dominant nonlinearity in our model is competitive binding (CB): only one odorant molecule can attach to a receptor binding site at a time. This simple framework predicts receptor responses to mixtures of up to twelve monomolecular odorants to within 15\% of experimental observations and provides a powerful method for leveraging limited experimental data. Simple extensions of our model describe phenomena such as synergy, overshadowing, and inhibition. We demonstrate that the presence of such interactions can be identified via systematic deviations from the competitive binding model.
△ Less
Submitted 4 February, 2019; v1 submitted 1 May, 2018;
originally announced May 2018.
-
All-Optical Nanopositioning of High-Q Silica Microspheres
Authors:
Rafino M. J. Murphy,
Fuchuan Lei,
Jonathan M. Ward,
Yong Yang,
SÍle Nic Chormaic
Abstract:
A tunable, all-optical, coupling method has been realized for a high-\textit{Q} silica microsphere and an optical waveguide. By means of a novel optical nanopositioning method, induced thermal expansion of an asymmetric microsphere stem for laser powers up to 171~mW has been observed and used to fine tune the microsphere-waveguide coupling. Microcavity displacements ranging from (0.612~$\pm$~0.13)…
▽ More
A tunable, all-optical, coupling method has been realized for a high-\textit{Q} silica microsphere and an optical waveguide. By means of a novel optical nanopositioning method, induced thermal expansion of an asymmetric microsphere stem for laser powers up to 171~mW has been observed and used to fine tune the microsphere-waveguide coupling. Microcavity displacements ranging from (0.612~$\pm$~0.13) -- (1.5 $\pm$ 0.13) $μ$m and nanometer scale sensitivities varying from (2.81 $\pm$ 0.08) -- (7.39 $\pm$ 0.17) nm/mW, with an apparent linear dependency of coupling distance on stem laser heating, were obtained. Using this method, the coupling was altered such that different coupling regimes could be explored for particular samples. This tunable coupling method, in principle, could be incorporated into lab-on-a-chip microresonator systems, photonic molecule systems, and other nanopositioning frameworks.
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Bandpass transmission spectra of a whispering-gallery microcavity coupled to an ultrathin fiber
Authors:
Fuchuan Lei,
Rafino M. J. Murphy,
Jonathon M. Ward,
Yong Yang,
Sile Nic Chormaic
Abstract:
Tapered fibers with diameters ranging from 1-4 micron are widely used to excite the whispering-gallery (WG) modes of microcavities. Typically, the transmission spectrum of a WG cavity coupled to a waveguide around a resonance assumes a Lorentzian dip morphology due to resonant absorption of the light within the cavity. In this paper, we demonstrate that the transmission spectra of a WG cavity coup…
▽ More
Tapered fibers with diameters ranging from 1-4 micron are widely used to excite the whispering-gallery (WG) modes of microcavities. Typically, the transmission spectrum of a WG cavity coupled to a waveguide around a resonance assumes a Lorentzian dip morphology due to resonant absorption of the light within the cavity. In this paper, we demonstrate that the transmission spectra of a WG cavity coupled with an ultrathin fiber (500-700nm) may exhibit both Lorentzian dips and peaks, depending on the gap between the fiber and the microcavity. By considering the large scattering loss of off-resonant light from the fiber within the coupling region, this phenomenon can be attributed to partially resonant light bypassing the lossy scattering region via WG modes, allowing it to be coupled both to and from the cavity, thence manifesting as Lorentzian peaks within the transmission spectra, which implies the system could be implemented within a bandpass filter framework.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
pyFRET: A Python Library for Single Molecule Fluorescence Data Analysis
Authors:
Rebecca R. Murphy,
Sophie E. Jackson,
David Klenerman
Abstract:
Single molecule Förster resonance energy transfer (smFRET) is a powerful experimental technique for studying the properties of individual biological molecules in solution. However, as adoption of smFRET techniques becomes more widespread, the lack of available software, whether open source or commercial, for data analysis, is becoming a significant issue. Here, we present pyFRET, an open source Py…
▽ More
Single molecule Förster resonance energy transfer (smFRET) is a powerful experimental technique for studying the properties of individual biological molecules in solution. However, as adoption of smFRET techniques becomes more widespread, the lack of available software, whether open source or commercial, for data analysis, is becoming a significant issue. Here, we present pyFRET, an open source Python package for the analysis of data from single-molecule fluorescence experiments from freely diffusing biomolecules. The package provides methods for the complete analysis of a smFRET dataset, from burst selection and denoising, through data visualisation and model fitting. We provide support for both continuous excitation and alternating laser excitation (ALEX) data analysis. pyFRET is available as a package downloadable from the Python Package Index (PyPI) under the open source three-clause BSD licence, together with links to extensive documentation and tutorials, including example usage and test data. Additional documentation including tutorials is hosted independently on ReadTheDocs. The code is available from the free hosting site Bitbucket. Through distribution of this software, we hope to lower the barrier for the adoption of smFRET experiments by other research groups and we encourage others to contribute modules for specific analysis needs.
△ Less
Submitted 19 December, 2014;
originally announced December 2014.
-
Design and Fabrication of a Chip-based Continuous-wave Atom Laser
Authors:
E. P. Power,
L. George,
B. Vanderelzen,
P. Herrera-Fierro,
R. Murphy,
S. M. Yalisove,
G. Raithel
Abstract:
We present a design for a continuous-wave (CW) atom laser on a chip and describe the process used to fabricate the device. Our design aims to integrate quadrupole magnetic guiding of ground state Rb atoms with continuous surface adsorption evaporative cooling to create a continuous Bose-Einstein condensate; out-coupled atoms from the condensate should realize a CW atom laser. We choose a geometry…
▽ More
We present a design for a continuous-wave (CW) atom laser on a chip and describe the process used to fabricate the device. Our design aims to integrate quadrupole magnetic guiding of ground state Rb atoms with continuous surface adsorption evaporative cooling to create a continuous Bose-Einstein condensate; out-coupled atoms from the condensate should realize a CW atom laser. We choose a geometry with three wires embedded in a spiral pattern in a silicon subtrate. The guide features an integrated solenoid to mitigate spin-flip losses and provide a tailored longitudinal magnetic field. Our design also includes multiple options for atom interferometry: accomodations are in place for laser-generated atom Fabry-Perot and Mach-Zehnder interferometers, and a pair of atomic beam X-splitters is incorporated for an all-magnetic atom Mach-Zehnder setup. We demonstrate the techniques necessary to fabricate our device using existing micro- and nano-scale fabrication equipment, and discuss future options for modified designs and fabrication processes.
△ Less
Submitted 2 February, 2012;
originally announced February 2012.
