-
Dualtronics: leveraging both faces of polar semiconductors
Authors:
Len van Deurzen,
Eungkyun Kim,
Naomi Pieczulewski,
Zexuan Zhang,
Anna Feduniewicz-Zmuda,
Mikolaj Chlipala,
Marcin Siekacz,
David Muller,
Huili Grace Xing,
Debdeep Jena,
Henryk Turski
Abstract:
Unlike non-polar semiconductors such as silicon, the broken inversion symmetry of the wide bandgap semiconductor gallium nitride leads to a large electronic polarization along a unique crystal axis. This makes the two surfaces of the semiconductor wafer perpendicular to the polar axis dramatically different in their physical and chemical properties. In the last three decades, the cation (gallium)…
▽ More
Unlike non-polar semiconductors such as silicon, the broken inversion symmetry of the wide bandgap semiconductor gallium nitride leads to a large electronic polarization along a unique crystal axis. This makes the two surfaces of the semiconductor wafer perpendicular to the polar axis dramatically different in their physical and chemical properties. In the last three decades, the cation (gallium) face of gallium nitride has been used for photonic devices such as LEDs and lasers. Though the cation face has also been predominantly used for electronic devices, the anion (nitrogen) face has recently shown promise for high electron mobility transistors due to favorable polarization discontinuities. In this work we show that it is possible to make photonic devices on the cation face, and electronic devices on the anion face, of the same semiconductor wafer. This opens the possibility for dualtronics in polar semiconductors, where electronic, photonic, and acoustic properties can be implemented on opposite faces of the same wafer, dramatically enhancing the functional capabilities of this revolutionary semiconductor family.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Silicon Implantation and Annealing in $β$-Ga$_2$O$_3$: Role of Ambient, Temperature, and Time
Authors:
K. R. Gann,
N. Pieczulewski1,
C. A. Gorsak,
K. Heinselman,
T. J. Asel,
B. A. Noesges,
K. T. Smith,
D. M. Dryden,
H. G. Xing,
H. P. Nair,
D. A. Muller,
M. O. Thompson
Abstract:
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) wi…
▽ More
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) with contact resistances below 0.29 $Ω$-mm. Homoepitaxial $β$-Ga$_2$O$_3$ films, grown by plasma assisted MBE on Fe-doped (010) substrates, were implanted at multiple energies to yield 100 nm box profiles of 5x10$^{18}$, 5x10$^{19}$, and 1x10$^{20}$ cm$^{-3}$. Anneals were performed in a UHV-compatible quartz furnace at 1 bar with well-controlled gas composition. To maintain $β$-Ga$_2$O$_3$ stability, $p_{O2}$ must be greater than 10$^{-9}$ bar. Anneals up to $p_{O2}$ = 1 bar achieve full activation at 5x10$^{18}$ cm$^{-3}$, while 5x10$^{19}$ cm$^{-3}$ must be annealed with $p_{O2}$ <10$^{-4}$ bar and 1x10$^{20}$ cm$^{-3}$ requires $p_{O2}$ <10$^{-6}$ bar. Water vapor prevents activation and must be maintained below 10$^{-8}$ bar. Activation is achieved for anneal temperatures as low as 850 °C with mobility increasing with anneal temperature up to 1050 °C, though Si diffusion has been reported above 950 °C. At 950 °C, activation is maximized between 5 and 20 minutes with longer times resulting in decreased carrier activation (over-annealing). This over-annealing is significant for concentrations above 5x10$^{19}$ cm$^{-3}$ and occurs rapidly at 1x10$^{20}$ cm$^{-3}$. RBS (channeling) suggests damage recovery is seeded from remnant aligned $β$-Ga$_2$O$_3$ that remains after implantation; this conclusion is also supported by STEM showing retention of the $β$-phase with inclusions that resemble the $γ$-phase.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Mathematical Artifacts Have Politics: The Journey from Examples to Embedded Ethics
Authors:
Dennis Müller,
Maurice Chiodo
Abstract:
We extend Langdon Winner's idea that artifacts have politics into the realm of mathematics. To do so, we first provide a list of examples showing the existence of mathematical artifacts that have politics. In the second step, we provide an argument that shows that all mathematical artifacts have politics. We conclude by showing the implications for embedding ethics into mathematical curricula. We…
▽ More
We extend Langdon Winner's idea that artifacts have politics into the realm of mathematics. To do so, we first provide a list of examples showing the existence of mathematical artifacts that have politics. In the second step, we provide an argument that shows that all mathematical artifacts have politics. We conclude by showing the implications for embedding ethics into mathematical curricula. We show how acknowledging that mathematical artifacts have politics can help mathematicians design better exercises for their mathematics students.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Thermodynamic route of Nb3Sn nucleation: Role of oxygen
Authors:
Zeming Sun,
Darrah K. Dare,
Zhaslan Baraissov,
David A. Muller,
Michael O. Thompson,
Matthias U. Liepe
Abstract:
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conv…
▽ More
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conventional Sn diffusion mechanism for Nb3Sn nucleation. Our results highlight the critical involvement of a SnOx intermediate phase. This new nucleation mechanism identifies the principles for growth optimization and new synthesis of high-quality Nb3Sn superconductors.
△ Less
Submitted 7 July, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Surface oxides, carbides, and impurities on RF superconducting Nb and Nb3Sn: A comprehensive analysis
Authors:
Zeming Sun,
Zhaslan Baraissov,
Catherine A. Dukes,
Darrah K. Dare,
Thomas Oseroff,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium-tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum…
▽ More
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium-tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum baking and nitrogen processing in Nb and demonstrate that carbide formation induced during high-temperature baking, regardless of gas environment, determines subsequent oxide formation upon air exposure or low-temperature baking, leading to modifications of the electron population profile. Our findings support the combined contribution of surface oxides and second-phase formation to the outcome of ultra-high vacuum baking (oxygen processing) and nitrogen processing. Also, we observe that vapor-diffused Nb3Sn contains thick metastable oxides, while electrochemically synthesized Nb3Sn only has a thin oxide layer. Our findings reveal fundamental mechanisms of baking and processing Nb and Nb3Sn surface structures for high-performance superconducting RF and quantum applications
△ Less
Submitted 16 October, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
Slow Solar Wind Connection Science during Solar Orbiter's First Close Perihelion Passage
Authors:
Stephanie L. Yardley,
Christopher J. Owen,
David M. Long,
Deborah Baker,
David H. Brooks,
Vanessa Polito,
Lucie M. Green,
Sarah Matthews,
Mathew Owens,
Mike Lockwood,
David Stansby,
Alexander W. James,
Gherado Valori,
Alessandra Giunta,
Miho Janvier,
Nawin Ngampoopun,
Teodora Mihailescu,
Andy S. H. To,
Lidia van Driel-Gesztelyi,
Pascal Demoulin,
Raffaella D'Amicis,
Ryan J. French,
Gabriel H. H. Suen,
Alexis P. Roulliard,
Rui F. Pinto
, et al. (54 additional authors not shown)
Abstract:
The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow w…
▽ More
The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter.
△ Less
Submitted 20 April, 2023; v1 submitted 19 April, 2023;
originally announced April 2023.
-
FOCUS : A framework for energy system optimization from prosumer to district and city scale
Authors:
**gyu Gong,
Yi Nie,
Jonas van Ouwerkerk,
Felix Wege,
Mauricio Celi Cortés,
Christoph von Oy,
Jonas Brucksch,
Christian Bußar,
Thomas Schreiber,
Dirk Uwe Sauer,
Dirk Müller,
Antonello Monti
Abstract:
Decarbonizing the energy sector is one of the main challenges to combat the climate crisis. Cities play an important role to reach climate neutrality as more than 70% of global CO2 emissions originate from urban areas. Decarbonization of energy supply systems can be achieved through various means, including the use of renewable energy sources, improving the efficiency of technologies, the coupling…
▽ More
Decarbonizing the energy sector is one of the main challenges to combat the climate crisis. Cities play an important role to reach climate neutrality as more than 70% of global CO2 emissions originate from urban areas. Decarbonization of energy supply systems can be achieved through various means, including the use of renewable energy sources, improving the efficiency of technologies, the coupling of different energy sectors, and the use of flexibility considering individual prosumer behaviour. This leads to an increasingly decentralized energy system, which is challenging to operate in a robust and cost-effective way. The evaluation of technologies and subsystems can only be done from the perspective of the system in which it is embedded and it is highly dependent on their networking and application scenarios. Therefore, the design and operation of energy systems require adequate computation and evaluation tools, which offer a holistic view of all interconnected components. The currently available optimization tools have limitations, such as limited scope of technologies and sectors, high requirements on data, high computational cost, and difficulty in handling multi-objective optimization. To overcome these limitations a software framework called FOCUS for the flexible and dynamic modeling of any urban sector-coupled energy system is developed. The framework includes a library containing models for different technologies and offers a variety of parameter sets for each technology. FOCUS can handle multi-objective problems by returning Pareto-optimal fronts, which helps users to discover the trade-off between criteria and objectives. The developed tool can identify new flexibility potentials in the energy system, actively support companies in the respective field to optimize urban energy system planning solutions, and determine possible threads to the stable operation of such systems.
△ Less
Submitted 14 April, 2023;
originally announced April 2023.
-
ZrNb(CO) RF superconducting thin film with high critical temperature in the theoretical limit
Authors:
Zeming Sun,
Thomas Oseroff,
Zhaslan Baraissov,
Darrah K. Dare,
Katrina Howard,
Benjamin Francis,
A**kya C. Hire,
Nathan Sitaraman,
Tomas A. Arias,
Mark K. Transtrum,
Richard Hennig,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Develo** advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report Zr…
▽ More
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Develo** advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report ZrNb(CO) RF superconducting films with high critical temperatures (Tc) achieved for the first time under ambient pressure. The attainment of a Tc near the theoretical limit for this material without applied pressure is promising for its use in practical applications. A range of Tc, likely arising from Zr do** variation, may allow a tunable superconducting coherence length that lowers the sensitivity to material defects when an ultra-low surface resistance is required. Our ZrNb(CO) films are synthesized using a low-temperature (100 - 200 C) electrochemical recipe combined with thermal annealing. The phase transformation as a function of annealing temperature and time is optimized by the evaporated Zr-Nb diffusion couples. Through phase control, we avoid hexagonal Zr phases that are equilibrium-stable but degrade Tc. X-ray and electron diffraction combined with photoelectron spectroscopy reveal a system containing cubic ZrNb mixed with rocksalt NbC and low-dielectric-loss ZrO2. We demonstrate proof-of-concept RF performance of ZrNb(CO) on an SRF sample test system. BCS resistance trends lower than reference Nb, while quench fields occur at approximately 35 mT. Our results demonstrate the potential of ZrNb(CO) thin films for particle accelerator and other SRF applications.
△ Less
Submitted 12 June, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis
Authors:
Zeming Sun,
Zhaslan Baraissov,
Ryan D. Porter,
Liana Shpani,
Yu-Tsun Shao,
Thomas Oseroff,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices.…
▽ More
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and X-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb3Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb3Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb3Sn by five times compared to typical vapor-diffused Nb3Sn. Quantitative map**s using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb3Sn. We have successfully applied this Nb3Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb3Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.
△ Less
Submitted 5 September, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Plasma composition measurements in an active region from Solar Orbiter/SPICE and Hinode/EIS
Authors:
David H. Brooks,
Miho Janvier,
Deborah Baker,
Harry P. Warren,
Frédéric Auchère,
Mats Carlsson,
Andrzej Fludra,
Don Hassler,
Hardi Peter,
Daniel Müller,
David R. Williams,
Regina Aznar Cuadrado,
Krzysztof Barczynski,
Eric Buchlin,
Martin Caldwell,
Terje Fredvik,
Alessandra Giunta,
Tim Grundy,
Steve Guest,
Margit Haberreiter,
Louise Harra,
Sarah Leeks,
Susanna Parenti,
Gabriel Pelouze,
Joseph Plowman
, et al. (6 additional authors not shown)
Abstract:
A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind envelo** the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordin…
▽ More
A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind envelo** the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordinated observations from Hinode and Solar Orbiter to attempt new abundance measurements with the SPICE (Spectral Imaging of the Coronal Environment) instrument, and benchmark them against standard analyses from EIS (EUV Imaging Spectrometer). We use observations of several solar features in AR 12781 taken from an Earth-facing view by EIS on 2020 November 10, and SPICE data obtained one week later on 2020 November 17; when the AR had rotated into the Solar Orbiter field-of-view. We identify a range of spectral lines that are useful for determining the transition region and low coronal temperature structure with SPICE, and demonstrate that SPICE measurements are able to differentiate between photospheric and coronal Mg/Ne abundances. The combination of SPICE and EIS is able to establish the atmospheric composition structure of a fan loop/outflow area at the active region edge. We also discuss the problem of resolving the degree of elemental fractionation with SPICE, which is more challenging without further constraints on the temperature structure, and comment on what that can tell us about the sources of the solar wind and solar energetic particles.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Multi-scale time-resolved electron diffraction: A case study in moiré materials
Authors:
C. J. R. Duncan,
M. Kaemingk,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
A. Galdi,
M. Gordon,
C. A. Pennington,
I. V. Bazarov,
H. J. Zeng,
F. Liu,
D. Luo,
A. Sood,
A. M. Lindenberg,
M. W. Tate,
D. A. Muller,
J. Thom-Levy,
S. M. Gruner,
J. M. Maxson
Abstract:
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep…
▽ More
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chop** technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time.
△ Less
Submitted 27 July, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Giant bulk spin-orbit torque and efficient electrical switching in single ferrimagnetic FeTb layers with strong perpendicular magnetic anisotropy
Authors:
Qianbiao Liu,
Lijun Zhu,
Xiyue S. Zhang,
David A. Muller,
Daniel C. Ralph
Abstract:
Efficient manipulation of antiferromagnetically coupled materials that are integration-friendly and have strong perpendicular magnetic anisotropy (PMA) is of great interest for low-power, fast, dense magnetic storage and computing. Here, we report a distinct, giant bulk dam**-like spin-orbit torque in strong-PMA ferrimagnetic Fe100-xTbx single layers that are integration-friendly (composition-un…
▽ More
Efficient manipulation of antiferromagnetically coupled materials that are integration-friendly and have strong perpendicular magnetic anisotropy (PMA) is of great interest for low-power, fast, dense magnetic storage and computing. Here, we report a distinct, giant bulk dam**-like spin-orbit torque in strong-PMA ferrimagnetic Fe100-xTbx single layers that are integration-friendly (composition-uniform, amorphous, sputter-deposited). For sufficiently-thick layers, this bulk torque is constant in the efficiency per unit layer thickness, ξ_DL^j/t, with a record-high value of 0.036nm-1, and the dam**like torque efficiency ξ_DL^j achieves very large values for thick layers, up to 300% for 90 nm layers. This giant bulk torque by itself switches tens of nm thick Fe100-xTbx layers that have very strong PMA and high coercivity at current densities as low as a few MA/cm2. Surprisingly, for a given layer thickness, ξ_DL^j shows strong composition dependence and becomes negative for composition where the total angular momentum is oriented parallel to the magnetization rather than antiparallel. Our findings of giant bulk spin torque efficiency and intriguing torque-compensation correlation will stimulate study of such unique spin-orbit phenomena in a variety of ferrimagnetic hosts. This work paves a promising avenue for develo** ultralow-power, fast, dense ferrimagnetic storage and computing devices.
△ Less
Submitted 26 March, 2022;
originally announced March 2022.
-
New simulation software technologies at the LHCb Experiment at CERN
Authors:
Michal Mazurek,
Gloria Corti,
Dominik Muller
Abstract:
The LHCb experiment at the Large Hadron Collider (LHC) at CERN has successfully performed a large number of physics measurements during Runs 1 and 2 of the LHC. Monte Carlo simulation is key to the interpretation of these and future measurements. The LHCb experiment is currently undergoing a major detector upgrade for Run 3 of the LHC to process events with five times higher luminosity. New simula…
▽ More
The LHCb experiment at the Large Hadron Collider (LHC) at CERN has successfully performed a large number of physics measurements during Runs 1 and 2 of the LHC. Monte Carlo simulation is key to the interpretation of these and future measurements. The LHCb experiment is currently undergoing a major detector upgrade for Run 3 of the LHC to process events with five times higher luminosity. New simulation software technologies have to be introduced to produce simulated data samples of sufficient size within the computing resources allocated for the next few years. Therefore, the LHCb collaboration is currently preparing an upgraded version of its Gauss simulation framework. The new version provides the LHCb specific functionality while its generic simulation infrastructure has been encapsulated in an experiment independent framework, Gaussino. The latter combines the Gaudi core software framework and the Geant4 simulation toolkit and fully exploits their multi-threading capabilities. A prototype of a fast simulation interface to the simulation toolkit is being developed as the latest addition to Gaussino to provide an extensive palette of fast simulation models, including new deep learning-based options.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Very-High Dynamic Range, 10,000 frames/second Pixel Array Detector for Electron Microscopy
Authors:
Hugh T. Philipp,
Mark W. Tate,
Katherine S. Shanks,
Luigi Mele,
Maurice Peemen,
Pleun Dona,
Reinout Hartong,
Gerard van Veen,
Yu-Tsun Shao,
Zhen Chen,
Julia Thom-Levy,
David A. Muller,
Sol M. Gruner
Abstract:
Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the map** of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electr…
▽ More
Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the map** of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electron Microscope Pixel Array Detector (EMPAD-G2), addresses this challenge by advancing the technology of a previous generation PAD, the EMPAD. The EMPAD-G2 images continuously at a frame-rates up to 10 kHz with a dynamic range that spans from low-noise detection of single electrons to electron beam currents exceeding 180 pA per pixel, even at electron energies of 300 keV. The EMPAD-G2 enables rapid collection of high-quality STEM data that simultaneously contain full diffraction information from unsaturated bright field disks to usable Kikuchi bands and higher-order Laue zones. Test results from 80 to 300 keV are presented, as are first experimental results demonstrating ptychographic reconstructions, strain and polarization maps. We introduce a new information metric, the Maximum Usable Imaging Speed (MUIS), to identify when a detector becomes electron-starved, saturated or its pixel count is mismatched with the beam current.
△ Less
Submitted 10 November, 2021;
originally announced November 2021.
-
High conductivity Polarization-induced 2D hole gases in Undoped GaN/AlN Heterojunctions enabled by Impurity Blocking Layers
Authors:
Reet Chaudhuri,
Zhen Chen,
David Muller,
Huili Grace Xing,
Debdeep Jena
Abstract:
High-conductivity undoped GaN/AlN 2D hole gases (2DHGs), the p-type dual of the AlGaN/GaN 2D electron gases (2DEGs), have offered valuable insights into hole transport in GaN and enabled the first GaN GHz RF p-channel FETs. They are an important step towards high-speed and high-power complementary electronics with wide-bandgap semiconductors. These technologically and scientifically relevant 2D ho…
▽ More
High-conductivity undoped GaN/AlN 2D hole gases (2DHGs), the p-type dual of the AlGaN/GaN 2D electron gases (2DEGs), have offered valuable insights into hole transport in GaN and enabled the first GaN GHz RF p-channel FETs. They are an important step towards high-speed and high-power complementary electronics with wide-bandgap semiconductors. These technologically and scientifically relevant 2D hole gases are perceived to be not as robust as the 2DEGs because structurally similar heterostructures exhibit wide variations of the hole density over $Δp_s >$ 7 x 10$^{13}$ cm$^{-2}$, and low mobilities. In this work, we uncover that the variations are tied to undesired dopant impurities such as Silicon and Oxygen floating up from the nucleation interface. By introducing impurity blocking layers (IBLs) in the AlN buffer layer, we eliminate the variability in 2D hole gas densities and transport properties, resulting in a much tighter-control over the 2DHG density variations to $Δp_s \leq$ 1 x 10$^{13}$ cm$^{-2}$ across growths, and a 3x boost in the Hall mobilities. These changes result in a 2-3x increase in hole conductivity when compared to GaN/AlN structures without IBLs.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Ferroelectricity in Polar ScAlN/GaN Epitaxial Semiconductor Heterostructures
Authors:
Joseph Casamento,
Ved Gund,
Hyunjea Lee,
Kazuki Nomoto,
Takuya Maeda,
Benyamin Davaji,
Mohammad Javad Asadi,
John Wright,
Yu-Tsun Shao,
David A. Muller,
Amit Lal,
Huili,
Xing,
Debdeep Jena
Abstract:
Room temperature ferroelectricity is observed in lattice-matched ~18% ScAlN/GaN heterostructures grown by molecular beam epitaxy on single-crystal GaN substrates. The epitaxial films have smooth surface morphologies and high crystallinity. Pulsed current-voltage measurements confirm stable and repeatable polarization switching in such ferroelectric/semiconductor structures at several measurement c…
▽ More
Room temperature ferroelectricity is observed in lattice-matched ~18% ScAlN/GaN heterostructures grown by molecular beam epitaxy on single-crystal GaN substrates. The epitaxial films have smooth surface morphologies and high crystallinity. Pulsed current-voltage measurements confirm stable and repeatable polarization switching in such ferroelectric/semiconductor structures at several measurement conditions, and in multiple samples. The measured coercive field values are Ec~0.7 MV/cm at room temperature, with remnant polarization Pr~10 μC/cm2 for ~100 nm thick ScAlN layers. These values are substantially lower than comparable ScAlN control layers deposited by sputtering. Importantly, the coercive field of MBE ScAlN is smaller than the critical breakdown field of GaN, offering the potential for low voltage ferroelectric switching. The low coercive field ferroelectricity of ScAlN on GaN heralds the possibility of new forms of electronic and photonic devices with epitaxially integrated ferroelectric/semiconductor heterostructures that take advantage of the GaN electronic and photonic semiconductor platform, where the underlying semiconductors themselves exhibit spontaneous and piezoelectric polarization.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Signatures of coronal hole substructure in the solar wind: combined Solar Orbiter remote sensing and in situ measurements
Authors:
T. S. Horbury,
R. Laker,
L. Rodriguez,
K. Steinvall,
M. Maksimovic,
S. Livi,
D. Berghmans,
F. Auchere,
A. N. Zhukov,
Yu. V. Khotyaintsev,
L. Woodham,
L. Matteini,
J. Stawarz,
T. Woolley,
S. D. Bale,
A. Rouillard,
H. O'Brien,
V. Evans,
V. Angelini,
C. Owen,
S. K. Solanki,
B. Nicula,
D. Muller,
I. Zouganelis
Abstract:
Context. The Sun's complex corona is the source of the solar wind and interplanetary magnetic field. While the large scale morphology is well understood, the impact of variations in coronal properties on the scale of a few degrees on properties of the interplanetary medium is not known. Solar Orbiter, carrying both remote sensing and in situ instruments into the inner solar system, is intended to…
▽ More
Context. The Sun's complex corona is the source of the solar wind and interplanetary magnetic field. While the large scale morphology is well understood, the impact of variations in coronal properties on the scale of a few degrees on properties of the interplanetary medium is not known. Solar Orbiter, carrying both remote sensing and in situ instruments into the inner solar system, is intended to make these connections better than ever before. Aims. We combine remote sensing and in situ measurements from Solar Orbiter's first perihelion at 0.5 AU to study the fine scale structure of the solar wind from the equatorward edge of a polar coronal hole with the aim of identifying characteristics of the corona which can explain the in situ variations. Methods. We use in situ measurements of the magnetic field, density and solar wind speed to identify structures on scales of hours at the spacecraft. Using Potential Field Source Surface map** we estimate the source locations of the measured solar wind as a function of time and use EUI images to characterise these solar sources. Results. We identify small scale stream interactions in the solar wind with compressed magnetic field and density along with speed variations which are associated with corrugations in the edge of the coronal hole on scales of several degrees, demonstrating that fine scale coronal structure can directly influence solar wind properties and drive variations within individual streams. Conclusions. This early analysis already demonstrates the power of Solar Orbiter's combined remote sensing and in situ payload and shows that with future, closer perihelia it will be possible dramatically to improve our knowledge of the coronal sources of fine scale solar wind structure, which is important both for understanding the phenomena driving the solar wind and predicting its impacts at the Earth and elsewhere.
△ Less
Submitted 30 April, 2021;
originally announced April 2021.
-
A Novel Nano Tomography Setup for Material Science and Engineering Applications
Authors:
Dominik Müller,
Jonas Graetz,
Andreas Balles,
Simon Stier,
Randolf Hanke,
Christian Fella
Abstract:
In a comprehensive study on several samples we demonstrate for our laboratory-based computed tomography system resolutions down to 150nm. The achieved resolution is validated by imaging com-mon test structures in 2D and Fourier Shell Correlation of 3D volumes. As representative application examples from nowadays material research, we show metallization processes in multilayer integrated circuits,…
▽ More
In a comprehensive study on several samples we demonstrate for our laboratory-based computed tomography system resolutions down to 150nm. The achieved resolution is validated by imaging com-mon test structures in 2D and Fourier Shell Correlation of 3D volumes. As representative application examples from nowadays material research, we show metallization processes in multilayer integrated circuits, ageing in lithium battery electrodes, and volumetric of metallic sub-micrometer fillers of com-posites. Thus, our laboratory system provides the unique possibility to image non-destructively struc-tures in the range of hundred nanometers, even for high density materials.
△ Less
Submitted 12 February, 2021;
originally announced February 2021.
-
Event-Chain Monte-Carlo Simulations of Dense Soft Matter Systems
Authors:
Tobias A. Kampmann,
David Müller,
Clemens Franz Vorsmann,
Lukas Paul Weise,
Jan Kierfeld
Abstract:
We discuss the rejection-free event-chain Monte-Carlo algorithm and several applications to dense soft matter systems. Event-chain Monte-Carlo is an alternative to standard local Markov-chain Monte-Carlo schemes, which are based on detailed balance, for example the well-known Metropolis-Hastings algorithm. Event-chain Monte-Carlo is a Markov chain Monte-Carlo scheme that uses so-called lifting mov…
▽ More
We discuss the rejection-free event-chain Monte-Carlo algorithm and several applications to dense soft matter systems. Event-chain Monte-Carlo is an alternative to standard local Markov-chain Monte-Carlo schemes, which are based on detailed balance, for example the well-known Metropolis-Hastings algorithm. Event-chain Monte-Carlo is a Markov chain Monte-Carlo scheme that uses so-called lifting moves to achieve global balance without rejections (maximal global balance). It has been originally developed for hard sphere systems but is applicable to many soft matter systems and particularly suited for dense soft matter systems with hard core interactions, where it gives significant performance gains compared to a local Monte-Carlo simulation. The algorithm can be generalized to deal with soft interactions and with three-particle interactions, as they naturally arise, for example, in bead-spring models of polymers with bending rigidity. We present results for polymer melts, where the event-chain algorithm can be used for an efficient initialization. We then move on to large systems of semiflexible polymers that form bundles by attractive interactions and can serve as model systems for actin filaments in the cytoskeleton. The event chain algorithm shows that these systems form networks of bundles which coarsen similar to a foam. Finally, we present results on liquid crystal systems, where the event-chain algorithm can equilibrate large systems containing additional colloidal disks very efficiently, which reveals the parallel chaining of disks.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Transferring Orbital Angular Momentum to an Electron Beam Reveals Toroidal and Chiral Order
Authors:
Kayla X. Nguyen,
Yi Jiang,
Michael C. Cao,
Prafull Purohit,
Ajay K. Yadav,
Pablo García-Fernández,
Mark W. Tate,
Celesta S. Chang,
Pablo Aguado-Puente,
Jorge Íñiguez,
Fernando Gomez-Ortiz,
Sol M. Gruner,
Javier Junquera,
Lane W. Martin,
Ramamoorthy Ramesh,
D. A. Muller
Abstract:
Orbital angular momentum and torque transfer play central roles in a wide range of magnetic textures and devices including skyrmions and spin-torque electronics(1-4). Analogous topological structures are now also being explored in ferroelectrics, including polarization vortex arrays in ferroelectric/dielectric superlattices(5). Unlike magnetic toroidal order, electric toroidal order does not coupl…
▽ More
Orbital angular momentum and torque transfer play central roles in a wide range of magnetic textures and devices including skyrmions and spin-torque electronics(1-4). Analogous topological structures are now also being explored in ferroelectrics, including polarization vortex arrays in ferroelectric/dielectric superlattices(5). Unlike magnetic toroidal order, electric toroidal order does not couple directly to linear external fields. To develop a mechanism that can control switching in polarization vortices, we utilize a high-energy electron beam and show that transverse currents are generated by polar order in the ballistic limit. We find that the presence of an electric toroidal moment in a ferro-rotational phase transfers a measurable torque and orbital angular momentum to the electron beam. Furthermore, we find that the complex polarization patterns, observed in these heterostructures, are microscopically chiral with a non-trivial axial component of the polarization. This chirality opens the door for the coupling of ferroelectric and optical properties.
△ Less
Submitted 9 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
$γ$-phase Inclusions as Common Defects in Alloyed $β$-(Al$_x$Ga$_{1\text{-}x}$)$_2$O$_3$ and Doped $β$-Ga$_2$O$_3$ Films
Authors:
Celesta S. Chang,
Nicholas Tanen,
Vladimir Protasenko,
Thaddeus J. Asel,
Shin Mou,
Huili Grace Xing,
Debdeep Jena,
David A. Muller
Abstract:
$β$-Ga$_2$O$_3$ is a promising ultra-wide bandgap semiconductor whose properties can be further enhanced by alloying with Al. Here, using atomic-resolution scanning transmission electron microscopy (STEM), we find the thermodynamically-unstable $γ$-phase is a ubiquitous defect in both $β$-(Al$_x$Ga$_{1\text{-}x}$)$_2$O$_3$ films and doped $β$-Ga$_2$O$_3…
▽ More
$β$-Ga$_2$O$_3$ is a promising ultra-wide bandgap semiconductor whose properties can be further enhanced by alloying with Al. Here, using atomic-resolution scanning transmission electron microscopy (STEM), we find the thermodynamically-unstable $γ$-phase is a ubiquitous defect in both $β$-(Al$_x$Ga$_{1\text{-}x}$)$_2$O$_3$ films and doped $β$-Ga$_2$O$_3$ films grown by molecular beam epitaxy. For undoped $β$-(Al$_x$Ga$_{1\text{-}x}$)$_2$O$_3$ films we observe $γ$-phase inclusions between nucleating islands of the $β$-phase at lower growth temperatures (~400-600 $^{\circ}$C). In doped $β$-Ga$_2$O$_3$, a thin layer of the $γ$-phase is observed on the surfaces of films grown with a wide range of n-type dopants and dopant concentrations. The thickness of the $γ$-phase layer was most strongly correlated with the growth temperature, peaking at about 600 $^{\circ}$C. Ga interstitials are observed in $β$-phase, especially near the interface with the $γ$-phase. By imaging the same region of the surface of a Sn-doped $β$-(Al$_x$Ga$_{1\text{-}x}$)$_2$O$_3$ after ex-situ heating up to 400 $^{\circ}$C, a $γ$-phase region is observed to grow above the initial surface, accompanied by a decrease in Ga interstitials in the $β$-phase. This suggests that the diffusion of Ga interstitials towards the surface is likely the mechanism for growth of the surface $γ$-phase, and more generally that the more-open $γ$-phase may offer diffusion pathways to be a kinetically-favored and early-forming phase in the growth of Ga$_2$O$_3$.
△ Less
Submitted 30 November, 2020;
originally announced December 2020.
-
Multi-Objective Bayesian Optimisation and Joint Inversion for Active Sensor Fusion
Authors:
Sebastian Haan,
Fabio Ramos,
Dietmar Müller
Abstract:
A critical decision process in data acquisition for mineral and energy resource exploration is how to efficiently combine a variety of sensor types and to minimize total cost. We propose a probabilistic framework for multi-objective optimisation and inverse problems given an expensive cost function for allocating new measurements. This new method is devised to jointly solve multi-linear forward mo…
▽ More
A critical decision process in data acquisition for mineral and energy resource exploration is how to efficiently combine a variety of sensor types and to minimize total cost. We propose a probabilistic framework for multi-objective optimisation and inverse problems given an expensive cost function for allocating new measurements. This new method is devised to jointly solve multi-linear forward models of 2D-sensor data and 3D-geophysical properties using sparse Gaussian Process kernels while taking into account the cross-variances of different parameters. Multiple optimisation strategies are tested and evaluated on a set of synthetic and real geophysical data. We demonstrate the advantages on a specific example of a joint inverse problem, recommending where to place new drill-core measurements given 2D gravity and magnetic sensor data, the same approach can be applied to a variety of remote sensing problems with linear forward models - ranging from constraints limiting surface access for data acquisition to adaptive multi-sensor positioning.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
The divergence and curl in arbitrary basis
Authors:
Waleska P. F. de Medeiros,
Rodrigo R. de Lima,
Vanessa C. de Andrade,
Daniel Müller
Abstract:
In this work, the divergence and curl operators are obtained using the coordinate free non rigid basis formulation of differential geometry. Although the authors have attempted to keep the presentation self-contained as much as possible, some previous exposure to the language of differential geometry may be helpful. In this sense the work is aimed to late undergraduate or beginners graduate studen…
▽ More
In this work, the divergence and curl operators are obtained using the coordinate free non rigid basis formulation of differential geometry. Although the authors have attempted to keep the presentation self-contained as much as possible, some previous exposure to the language of differential geometry may be helpful. In this sense the work is aimed to late undergraduate or beginners graduate students interested in mathematical physics. To illustrate the development, we graphically present the eleven coordinate systems in which the Laplace operator is separable. We detail the development of the basis and the connection for the cylindrical and paraboloidal coordinate systems. We also present in [1] codes both in Maxima and Maple for the spherical orthonormal basis, which serves as a working model for calculations in other situations of interest. Also in [1] the codes to obtain the coordinate surfaces are given.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Lenseless X-ray Nano-Tomography down to 150nm Resolution: On the Quantification of Modulation Transfer and Focal Spot of the Lab-based ntCT System
Authors:
Jonas Graetz,
Dominik Müller,
Andreas Balles,
Christian Fella
Abstract:
The ntCT nano tomography system is a geometrically magnifying X-ray microscopy system integrating the recent Excillum NanoTube nano-focus X-ray source and a CdTe photon counting detector from Dectris. The system's modulation transfer function (MTF) and corresponding point spread function (PSF) are characterized by analyzing the contrast visibility of periodic structures of a star pattern featuring…
▽ More
The ntCT nano tomography system is a geometrically magnifying X-ray microscopy system integrating the recent Excillum NanoTube nano-focus X-ray source and a CdTe photon counting detector from Dectris. The system's modulation transfer function (MTF) and corresponding point spread function (PSF) are characterized by analyzing the contrast visibility of periodic structures of a star pattern featuring line width from 150nm to 1.5$μ$m. The results, which can be attributed to the characteristics of the source spot, are crosschecked by scanning the source's electron focus over an edge of the structured transmission target in order to obtain an independent measurement of its point spread function. For frequencies above 1000 linepairs/mm, the MTF is found to correspond to a Gaussian PSF of 250nm full width at half maximum (FWHM). The lower frequency range down to 340 linepairs/mm shows an additional Gaussian contribution of 1$μ$m FWHM. The resulting resolution ranges at 3200 linepairs/mm, which is consistent with the visual detectability of the smallest 150nm structures within the imaged star pattern.
△ Less
Submitted 18 December, 2020; v1 submitted 24 September, 2020;
originally announced September 2020.
-
Tuning the convergence angle for optimum STEM performance
Authors:
Matthew Weyland,
David A. Muller
Abstract:
The achievable instrumental performance of a scanning transmission electron microscope (STEM) is determined by the size and shape of the incident electron probe. The most important optical factor in achieving the optimum probe profile is the radius of the probe-forming aperture, which determines the convergence semi-angle of the illumination. What is often overlooked however is that small deviatio…
▽ More
The achievable instrumental performance of a scanning transmission electron microscope (STEM) is determined by the size and shape of the incident electron probe. The most important optical factor in achieving the optimum probe profile is the radius of the probe-forming aperture, which determines the convergence semi-angle of the illumination. What is often overlooked however is that small deviations from this optimum can degrade both the resolution and interpretability of image contrast. A 30% error in aperture radius can lead to a factor of 2 contrast reduction in typical lattice spacings, and a 5 Å error in the thickness measurement of thin layers (such as gate oxides). Theoretical calculations of the optimum convergence angles, from a wave-optical consideration of the probe forming conditions, are explained and their consequences discussed. An experimental approach to the measurement and tuning of the convergence angle is then introduced.
This is intended for uncorrected electron microscopes. For corrected instruments, Cs=0, and Cc usually determines the choice of aperture - see e.g. ULTRAMICROSCOPY 108, (2008) 1454-1466
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Observation of strong bulk dam**-like spin-orbit torque in chemically disordered ferromagnetic single layers
Authors:
Lijun Zhu,
Xiyue S. Zhang,
David A. Muller,
Daniel C. Ralph,
Robert A. Buhrman
Abstract:
Strong dam**-like spin-orbit torque (τDL) has great potential for enabling ultrafast energy-efficient magnetic memories, oscillators, and logic. So far, the reported τDL exerted on a thin-film magnet must result from an externally generated spin current or from an internal non-equilibrium spin polarization in noncentrosymmetric GaMnAs single crystals. Here, we for the first time demonstrate a ve…
▽ More
Strong dam**-like spin-orbit torque (τDL) has great potential for enabling ultrafast energy-efficient magnetic memories, oscillators, and logic. So far, the reported τDL exerted on a thin-film magnet must result from an externally generated spin current or from an internal non-equilibrium spin polarization in noncentrosymmetric GaMnAs single crystals. Here, we for the first time demonstrate a very strong, unexpected τDL from current flow within ferromagnetic single layers of chemically disordered, face-centered-cubic CoPt. We establish that the novel τDL is a bulk effect, with the strength per unit current density increasing monotonically with the CoPt thickness, and is insensitive to the presence or absence of spin sinks at the CoPt surfaces. This τDL most likely arises from a net transverse spin polarization associated with a strong spin Hall effect (SHE), while there is no detectable long-range asymmetry in the material. These results broaden the scope of spin-orbitronics and provide a novel avenue for develo** single-layer-based spin-torque memory, oscillator, and logic technologies.
△ Less
Submitted 19 August, 2020; v1 submitted 12 August, 2020;
originally announced August 2020.
-
Crystal orientation dictated epitaxy of ultrawide bandgap 5.4-8.6 eV $α$-(AlGa)$_2$O$_3$ on m-plane sapphire
Authors:
Riena **no,
Celesta S. Chang,
Takeyoshi Onuma,
Yong** Cho,
Shao-Ting Ho,
Michael C. Cao,
Kevin Lee,
Vladimir Protasenko,
Darrell G. Schlom,
David A. Muller,
Huili G. Xing,
Debdeep Jena
Abstract:
Ultra-wide bandgap semiconductors are ushering in the next generation of high power electronics. The correct crystal orientation can make or break successful epitaxy of such semiconductors. Here it is discovered that single-crystalline layers of $α$-(AlGa)$_2$O$_3$ alloys spanning bandgaps of 5.4 - 8.6 eV can be grown by molecular beam epitaxy. The key step is found to be the use of m-plane sapphi…
▽ More
Ultra-wide bandgap semiconductors are ushering in the next generation of high power electronics. The correct crystal orientation can make or break successful epitaxy of such semiconductors. Here it is discovered that single-crystalline layers of $α$-(AlGa)$_2$O$_3$ alloys spanning bandgaps of 5.4 - 8.6 eV can be grown by molecular beam epitaxy. The key step is found to be the use of m-plane sapphire crystal. The phase transition of the epitaxial layers from the $α$- to the narrower bandgap $β$-phase is catalyzed by the c-plane of the crystal. Because the c-plane is orthogonal to the growth front of the m-plane surface of the crystal, the narrower bandgap pathways are eliminated, revealing a route to much wider bandgap materials with structural purity. The resulting energy bandgaps of the epitaxial layers span a range beyond the reach of all other semiconductor families, heralding the successful epitaxial stabilization of the largest bandgap materials family to date.
△ Less
Submitted 16 July, 2020; v1 submitted 7 July, 2020;
originally announced July 2020.
-
Chaining of hard disks in nematic needles: particle-based simulation of colloidal interactions in liquid crystals
Authors:
David Müller,
Tobias A. Kampmann,
Jan Kierfeld
Abstract:
Colloidal particles suspended in liquid crystals can exhibit various effective anisotropic interactions that can be tuned and utilized in self-assembly processes. We simulate a two-dimensional system of hard disks suspended in a solution of dense hard needles as a model system for colloids suspended in a nematic lyotropic liquid crystal. The novel event-chain Monte Carlo technique enables us to di…
▽ More
Colloidal particles suspended in liquid crystals can exhibit various effective anisotropic interactions that can be tuned and utilized in self-assembly processes. We simulate a two-dimensional system of hard disks suspended in a solution of dense hard needles as a model system for colloids suspended in a nematic lyotropic liquid crystal. The novel event-chain Monte Carlo technique enables us to directly measure colloidal interactions in a microscopic simulation with explicit liquid crystal particles in the dense nematic phase. We find a directional short-range attraction for disks along the director, which triggers chaining parallel to the director and seemingly contradicts the standard liquid crystal field theory result of a quadrupolar attraction with a preferred ${45^{\circ}}$ angle. Our results can be explained by a short-range density-dependent depletion interaction, which has been neglected so far. Directionality and strength of the depletion interaction are caused by the weak planar anchoring of hard rods. The depletion attraction robustly dominates over the quadrupolar elastic attraction if disks come close. Self-assembly of many disks proceeds via intermediate chaining, which demonstrates that in lyotropic liquid crystal colloids depletion interactions play an important role in structure formation processes.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Bidirectional Self-Folding with Atomic Layer Deposition Nanofilms for Microscale Origami
Authors:
Baris Bircan,
Marc Z. Miskin,
Robert J. Lang,
Michael C. Cao,
Kyle J. Dorsey,
Muhammad G. Salim,
Wei Wang,
David A. Muller,
Paul L. McEuen,
Itai Cohen
Abstract:
Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate microscale origami using unidirectionally actuated sheets with nanoscale thickness. Here, we extend the full power of origami-inspired fabrication to nanoscale sheets by…
▽ More
Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate microscale origami using unidirectionally actuated sheets with nanoscale thickness. Here, we extend the full power of origami-inspired fabrication to nanoscale sheets by engineering bidirectional folding with 4 nm thick atomic layer deposition (ALD) SiNx-SiO2 bilayer films. Strain differentials within these bilayers result in bending, producing microscopic radii of curvature. We lithographically pattern these bilayers and localize the bending using rigid panels to fabricate a variety of complex micro-origami devices. Upon release, these devices self-fold according to prescribed patterns. Our approach combines planar semiconductor microfabrication methods with computerized origami design, making it easy to fabricate and deploy such microstructures en masse. These devices represent an important step forward in the fabrication and assembly of deployable micromechanical systems that can interact with and manipulate micro- and nanoscale environments.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Electron tomography for functional nanomaterials
Authors:
Robert Hovden,
David A. Muller
Abstract:
Modern nanomaterials contain complexity that spans all three dimensions - from multigate semiconductors to clean energy nanocatalysts to complex block copolymers. For nanoscale characterization, it has been a long-standing goal to observe and quantify the three-dimensional (3D) structure - not just surfaces, but the entire internal volume and the chemical arrangement. Electron tomography estimates…
▽ More
Modern nanomaterials contain complexity that spans all three dimensions - from multigate semiconductors to clean energy nanocatalysts to complex block copolymers. For nanoscale characterization, it has been a long-standing goal to observe and quantify the three-dimensional (3D) structure - not just surfaces, but the entire internal volume and the chemical arrangement. Electron tomography estimates the complete 3D structure of nanomaterials from a series of two-dimensional projections taken across many viewing angles. Since its first introduction in 1968, electron tomography has progressed substantially in resolution, dose, and chemical sensitivity. In particular, scanning transmission electron microscope tomography has greatly enhanced the study of 3D nanomaterials by providing quantifiable internal morphology and spectroscopic detection of elements. Combined with recent innovations in computational reconstruction algorithms and 3D visualization tools, scientists can interactively dissect volumetric representations and extract meaningful statistics of specimens. This article highlights the maturing field of electron tomography and the widening scientific applications that utilize 3D structural, chemical, and functional imaging at the nanometer and subnanometer length scales.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Lossless monochromation for electron microscopy with pulsed photoemission sources and rf cavities
Authors:
Cameron J. R. Duncan,
David A. Muller,
Jared M. Maxson
Abstract:
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial…
▽ More
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial and energy resolution. This improvement is the result of monochromating in the time domain, unconstrained by the transverse brightness of the electron source. We show analytically and confirm numerically that cavity parameters chosen to minimize energy spread perform the additional function of undoing the appreciable effect of chromatic aberration in the upstream optics. We argue that our design has significant applications in both ultra-fast and non-time-resolved microscopy, provided photoelectron sources of sufficiently small size and laser sources of sufficiently high repetition rate. Our design achieves in simulations more than two orders of magnitude reduction in beam energy spread, down to single digit meV. Overcoming the minimum probe-size limit that chromatic aberration imposes, our design clears a path for high-current, high-resolution electron beam applications at primary energies from single to hundreds of keV.
△ Less
Submitted 5 January, 2021; v1 submitted 25 February, 2020;
originally announced February 2020.
-
Economic Viability and Infrastructure Requirements for the Electrification of Highway Traffic
Authors:
Thiemo Pesch,
Hans-Josef Allelein Dirk Müller,
Dirk Witthaut
Abstract:
Battery electric vehicles are rapidly entering the market. Their success offers great opportunities for the decarbonization of the transport sector, but also pose new challenges to energy infrastructures. Public charging stations must be built and power grids may become congested. In this article, we analyze the optimal layout and operation of charging systems along highways using a high-resolutio…
▽ More
Battery electric vehicles are rapidly entering the market. Their success offers great opportunities for the decarbonization of the transport sector, but also pose new challenges to energy infrastructures. Public charging stations must be built and power grids may become congested. In this article, we analyze the optimal layout and operation of charging systems along highways using a high-resolution optimization model. We discuss the economic viability and identify potential roadblocks impeding a rapid build-up of electric mobility. We find that congestion of regional distribution grids becomes a serious issue already for a moderate market penetration of electric vehicles. While peak loads can be handled by battery electric storage systems, the grid connection fundamentally limits the total amount of cars that can be served per day. Our results further highlight the interdependency of different sectors and the importance of regional infrastructures during the transformation to a sustainable energy system. Given the long time period needed for the planning and realization of infrastructure measures, rapid decisions are imperative.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Disentangling magnetic and grain contrast in polycrystalline FeGe thin films using four-dimensional Lorentz scanning transmission electron microscopy
Authors:
Kayla X. Nguyen,
Xiyue S. Zhang,
Emrah Turgut,
Michael C. Cao,
Jack Glaser,
Zhen Chen,
Matthew J. Stolt,
Celesta S. Chang,
Yu-Tsun Shao,
Song **,
Gregory D. Fuchs,
David A. Muller
Abstract:
The study of nanoscale chiral magnetic order in polycrystalline materials with a strong Dzyaloshinkii-Moriya interaction (DMI) is interesting for the observation of magnetic phenomena at grain boundaries and interfaces. One such material is sputter-deposited B20 FeGe on Si, which has been actively investigated as the basis for low-power, high-density magnetic memory technology in a scalable materi…
▽ More
The study of nanoscale chiral magnetic order in polycrystalline materials with a strong Dzyaloshinkii-Moriya interaction (DMI) is interesting for the observation of magnetic phenomena at grain boundaries and interfaces. One such material is sputter-deposited B20 FeGe on Si, which has been actively investigated as the basis for low-power, high-density magnetic memory technology in a scalable material platform. Although conventional Lorentz electron microscopy provides the requisite spatial resolution to probe chiral magnetic textures in single-crystal FeGe, probing the magnetism of sputtered B20 FeGe is more challenging because the sub-micron crystal grains add confounding contrast. We address the challenge of disentangling magnetic and grain contrast by applying 4-dimensional Lorentz scanning transmission electron microscopy using an electron microscope pixel array detector. Supported by analytical and numerical models, we find that the most important parameter for imaging magnetic materials with polycrystalline grains is the ability for the detector to sustain large electron doses, where having a high-dynamic range detector becomes extremely important. Despite the small grain size in sputtered B20 FeGe on Si, using this approach we are still able to observe helicity switching of skyrmions and magnetic helices across two adjacent grains as they thread through neighboring grains. We reproduce this effect using micromagnetic simulations by assuming that the grains have distinct orientation and magnetic chirality and find that magnetic helicity couples to crystal chirality. Our methodology for imaging magnetic textures is applicable to other thin-film magnets used for spintronics and memory applications, where an understanding of how magnetic order is accommodated in polycrystalline materials is important.
△ Less
Submitted 7 March, 2022; v1 submitted 19 January, 2020;
originally announced January 2020.
-
Photoelectron circular dichroism in the multiphoton ionization by short laser pulses: III. Photoionization of fenchone in different regimes
Authors:
Anne D. Müller,
Eric Kutscher,
Anton N. Artemyev,
Philipp V. Demekhin
Abstract:
Photoelectron circular dichroism (PECD) in different regimes of multiphoton ionization of fenchone is studied theoretically using the time-dependent single center method. In particular, we investigate the chiral response to the one-color multiphoton or strong-field ionization by circularly polarized 400 and 814 nm optical laser pulses or 1850 nm infrared pulse. In addition, the broadband ionizatio…
▽ More
Photoelectron circular dichroism (PECD) in different regimes of multiphoton ionization of fenchone is studied theoretically using the time-dependent single center method. In particular, we investigate the chiral response to the one-color multiphoton or strong-field ionization by circularly polarized 400 and 814 nm optical laser pulses or 1850 nm infrared pulse. In addition, the broadband ionization by short coherent circularly polarized 413-1240 nm spanning pulse is considered. Finally, the two-color ionization by the phase-locked 400 and 800 nm pulses, which are linearly polarized in mutually-orthogonal directions, is investigated. The present computational results on the one-color multiphoton ionization of fenchone are in agreement with the available experimental data. For the ionization of fenchone by broadband and bichromatic pulses, the present theoretical study predicts substantial multiphoton PECDs.
△ Less
Submitted 14 January, 2020;
originally announced January 2020.
-
Significantly Reduced Thermal Conductivity in Beta-(Al0.1Ga0.9)2O3/Ga2O3 Superlattices
Authors:
Zhe Cheng,
Nicholas Tanen,
Celesta Chang,
**g**g Shi,
Jonathan McCandless,
David Muller,
Debdeep Jena,
Huili Grace Xing,
Samuel Graham
Abstract:
Beta-Ga2O3 has emerged as a promising candidate for electronic device applications because of its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt. However, its thermal conductivity is at least one order of magnitude lower than that of other wide bandgap semiconductors such as SiC and GaN. Thermal dissipation in electronics made from beta-…
▽ More
Beta-Ga2O3 has emerged as a promising candidate for electronic device applications because of its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt. However, its thermal conductivity is at least one order of magnitude lower than that of other wide bandgap semiconductors such as SiC and GaN. Thermal dissipation in electronics made from beta-Ga2O3 will be the bottleneck for real-world applications, especially for high power and high frequency devices. Similar to GaN/AlGaN interfaces, beta-(AlxGa1-x)2O3/Ga2O3 heterogeneous structures have been used to form a high mobility two-dimensional electron gas (2DEG) where joule heating is localized. The thermal properties of beta-(AlxGa1-x)2O3/Ga2O3 are the key for heat dissipation in these devices while they have not been studied before. This work reports the first measurement on thermal conductivity of beta-(Al0.1Ga0.9)2O3/Ga2O3 superlattices from 80 K to 480 K. Its thermal conductivity is significantly reduced (5.7 times reduction) at room temperature comparing with that of bulk Ga2O3. Additionally, the thermal conductivity of bulk Ga2O3 with (010) orientation is measured and found to be consistent with literature values regardless of Sn do**. We discuss the phonon scattering mechanism in these structures by calculating their inverse thermal diffusivity. By comparing the estimated thermal boundary conductance (TBC) of beta-(Al0.1Ga0.9)2O3/Ga2O3 interfaces and Ga2O3 maximum TBC, we reveal that some phonons in the superlattices transmit through several interfaces before scattering with other phonons or structural imperfections. This study is not only important for Ga2O3 electronics applications especially for high power and high frequency applications, but also for the fundamental thermal science of phonon transport across interfaces and in superlattices.
△ Less
Submitted 30 April, 2019;
originally announced May 2019.
-
Sampling Limits for Electron Tomography with Sparsity-exploiting Reconstructions
Authors:
Yi Jiang,
Elliot Padgett,
Robert Hovden,
David A. Muller
Abstract:
Electron tomography (ET) has become a standard technique for 3D characterization of materials at the nano-scale. Traditional reconstruction algorithms such as weighted back projection suffer from disruptive artifacts with insufficient projections. Popularized by compressed sensing, sparsity-exploiting algorithms have been applied to experimental ET data and show promise for improving reconstructio…
▽ More
Electron tomography (ET) has become a standard technique for 3D characterization of materials at the nano-scale. Traditional reconstruction algorithms such as weighted back projection suffer from disruptive artifacts with insufficient projections. Popularized by compressed sensing, sparsity-exploiting algorithms have been applied to experimental ET data and show promise for improving reconstruction quality or reducing the total beam dose applied to a specimen. Nevertheless, theoretical bounds for these methods have been less explored in the context of ET applications. Here, we perform numerical simulations to investigate performance of l_1-norm and total-variation (TV) minimization under various imaging conditions. From 36,100 different simulated structures, our results show specimens with more complex structures generally require more projections for exact reconstruction. However, once sufficient data is acquired, dividing the beam dose over more projections provides no improvements - analogous to the traditional dose-fraction theorem. Moreover, a limited tilt range of +-75 or less can result in distorting artifacts in sparsity-exploiting reconstructions. The influence of optimization parameters on reconstructions is also discussed.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Develo** a silica aerogel radiator for the HELIX ring-imaging Cherenkov system
Authors:
Makoto Tabata,
Patrick Allison,
James J. Beatty,
Stephane Coutu,
Mark Gebhard,
Noah Green,
David Hanna,
Brandon Kunkler,
Mike Lang,
Keith McBride,
Isaac Mognet,
Dietrich Müller,
James Musser,
Scott Nutter,
Nahee Park,
Michael Schubnell,
Gregory Tarlé,
Andrew Tomasch,
Gerard Visser,
Scott P. Wakely,
Ian Wisher
Abstract:
This paper reports the successful fabrication of silica aerogel Cherenkov radiators produced in the first batches from a 96-tile mass production performed using pin-drying technique in our laboratory. The aerogels are to be used in a ring-imaging Cherenkov detector in the spectrometer of a planned balloon-borne cosmic-ray observation program, HELIX (High Energy Light Isotope eXperiment). A total o…
▽ More
This paper reports the successful fabrication of silica aerogel Cherenkov radiators produced in the first batches from a 96-tile mass production performed using pin-drying technique in our laboratory. The aerogels are to be used in a ring-imaging Cherenkov detector in the spectrometer of a planned balloon-borne cosmic-ray observation program, HELIX (High Energy Light Isotope eXperiment). A total of 36 transparent, hydrophobic aerogel tiles with a high refractive index of 1.16 and dimensions of 10 cm $\times $ 10 cm $\times $ 1 cm will be chosen as the flight radiators. Thus far, 40 out of the 48 tiles fabricated were confirmed as having no tile cracking. In the first screening, 8 out of the first 16 tiles were accepted as flight-qualified candidates, based on basic optical measurement results. To fit the aerogel tiles into a radiator support structure, the trimming of previously manufactured prototype tiles using a water-jet cutting device was successful.
△ Less
Submitted 20 January, 2019;
originally announced January 2019.
-
Surrogate-assisted Bayesian inversion for landscape and basin evolution models
Authors:
Rohitash Chandra,
Danial Azam,
Arpit Kapoor,
R. Dietmar Müller
Abstract:
The complex and computationally expensive nature of landscape evolution models pose significant challenges in the inference and optimisation of unknown parameters. Bayesian inference provides a methodology for estimation and uncertainty quantification of unknown model parameters. In our previous work, we developed parallel tempering Bayeslands as a framework for parameter estimation and uncertaint…
▽ More
The complex and computationally expensive nature of landscape evolution models pose significant challenges in the inference and optimisation of unknown parameters. Bayesian inference provides a methodology for estimation and uncertainty quantification of unknown model parameters. In our previous work, we developed parallel tempering Bayeslands as a framework for parameter estimation and uncertainty quantification for the Badlands landscape evolution model. Parallel tempering Bayeslands features high-performance computing with dozens of processing cores running in parallel to enhance computational efficiency. Although we use parallel computing, the procedure remains computationally challenging since thousands of samples need to be drawn and evaluated. \textcolor{black}{In large-scale landscape and basin evolution problems, a single model evaluation can take from several minutes to hours, and in some instances, even days. Surrogate-assisted optimisation has been used for several computationally expensive engineering problems which motivate its use in optimisation and inference of complex geoscientific models.} The use of surrogate models can speed up parallel tempering Bayeslands by develo** computationally inexpensive models to mimic expensive ones. In this paper, we apply surrogate-assisted parallel tempering where that surrogate mimics a landscape evolution model by estimating the likelihood function from the model. \textcolor{black}{We employ a neural network-based surrogate model that learns from the history of samples generated. } The entire framework is developed in a parallel computing infrastructure to take advantage of parallelism. The results show that the proposed methodology is effective in lowering the overall computational cost significantly while retaining the quality of solutions.
△ Less
Submitted 27 June, 2020; v1 submitted 11 December, 2018;
originally announced December 2018.
-
Gate-recessed E-mode p-channel HFET with high on-current based on GaN/AlN 2D hole gas
Authors:
Samuel James Bader,
Reet Chaudhuri,
Kazuki Nomoto,
Austin Hickman,
Zhen Chen,
Han Wui Then,
David A. Muller,
Huili Grace Xing,
Debdeep Jena
Abstract:
High-performance p-channel transistors are crucial to implementing efficient complementary circuits in wide-bandgap electronics, but progress on such devices has lagged far behind their powerful electron-based counterparts due to the inherent challenges of manipulating holes in wide-gap semiconductors. Building on recent advances in materials growth, this work sets simultaneous records in both on-…
▽ More
High-performance p-channel transistors are crucial to implementing efficient complementary circuits in wide-bandgap electronics, but progress on such devices has lagged far behind their powerful electron-based counterparts due to the inherent challenges of manipulating holes in wide-gap semiconductors. Building on recent advances in materials growth, this work sets simultaneous records in both on-current (10 mA/mm) and on-off modulation (four orders) for the GaN/AlN wide-bandgap p-FET structure. A compact analytical pFET model is derived, and the results are benchmarked against the various alternatives in the literature, clarifying the heterostructure trade-offs to enable integrated wide-bandgap CMOS for next-generation compact high-power devices.
△ Less
Submitted 18 October, 2018; v1 submitted 7 September, 2018;
originally announced September 2018.
-
Multi-core parallel tempering Bayeslands for basin and landscape evolution
Authors:
Rohitash Chandra,
R. Dietmar Müller,
Danial Azam,
Ratneel Deo,
Nathaniel Butterworth,
Tristan Salles,
Sally Cripps
Abstract:
The Bayesian paradigm is becoming an increasingly popular framework for estimation and uncertainty quantification of unknown parameters in geo-physical inversion problems. Badlands is a basin and landscape evolution forward model for simulating topography evolution at a large range of spatial and time scales. Our previous work presented Bayeslands that used the Bayesian paradigm to make inference…
▽ More
The Bayesian paradigm is becoming an increasingly popular framework for estimation and uncertainty quantification of unknown parameters in geo-physical inversion problems. Badlands is a basin and landscape evolution forward model for simulating topography evolution at a large range of spatial and time scales. Our previous work presented Bayeslands that used the Bayesian paradigm to make inference for unknown parameters in the Badlands model using Markov chain Monte Carlo (MCMC) sampling. Bayeslands faced challenges in convergence due to multi-modal posterior distributions in the selected parameters of Badlands. Parallel tempering is an advanced MCMC method suited for irregular and multi-modal posterior distributions. In this paper, we extend Bayeslands using parallel tempering (PT-Bayeslands) with high performance computing to address previous limitations in parameter space exploration in the context of the computationally expensive Badlands model. Our results show that PT-Bayeslands not only reduces the computation time, but also provides an improvement of the sampling for multi-modal posterior distributions. This provides an improvement over Bayeslands which used single chain MCMC that face difficulties in convergence and can lead to misleading inference. This motivates its usage in large-scale basin and landscape evolution models.
△ Less
Submitted 19 July, 2019; v1 submitted 22 June, 2018;
originally announced June 2018.
-
Photoelectron circular dichroism in the multiphoton ionization by short laser pulses: II. Three- and four-photon ionization of fenchone and camphor
Authors:
Anne D. Müller,
Anton N. Artemyev,
Philipp V. Demekhin
Abstract:
Angle-resolved multiphoton ionization of fenchone and camphor by short intense laser pulses is computed by the time-dependent Single Center (TDSC) method. Thereby, the photoelectron circular dichroism (PECD) in the three-photon resonance enhanced ionization and four-photon above-threshold ionization of these molecules is investigated in detail. The computational results are in a satisfactory agree…
▽ More
Angle-resolved multiphoton ionization of fenchone and camphor by short intense laser pulses is computed by the time-dependent Single Center (TDSC) method. Thereby, the photoelectron circular dichroism (PECD) in the three-photon resonance enhanced ionization and four-photon above-threshold ionization of these molecules is investigated in detail. The computational results are in a satisfactory agreement with the available experimental data, measured for randomly-oriented fenchone and camphor molecules at different wavelengths of the exciting pulses. We predict a significant enhancement of the multiphoton PECD for uniaxially-oriented fenchone and camphor.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Bayeslands: A Bayesian inference approach for parameter uncertainty quantification in Badlands
Authors:
Rohitash Chandra,
Danial Azam,
R. Dietmar Müller,
Tristan Salles,
Sally Cripps
Abstract:
Bayesian inference provides a rigorous methodology for estimation and uncertainty quantification of parameters in geophysical forward models. Badlands (basin and landscape dynamics model) is a landscape evolution model that simulates topography development at various space and time scales. Badlands consists of a number of geophysical parameters that needs estimation with appropriate uncertainty qu…
▽ More
Bayesian inference provides a rigorous methodology for estimation and uncertainty quantification of parameters in geophysical forward models. Badlands (basin and landscape dynamics model) is a landscape evolution model that simulates topography development at various space and time scales. Badlands consists of a number of geophysical parameters that needs estimation with appropriate uncertainty quantification; given the observed present-day ground truth such as surface topography and the stratigraphy of sediment deposition through time. The inference of unknown parameters is challenging due to the scarcity of data, sensitivity of the parameter setting and complexity of the Badlands model. In this paper, we take a Bayesian approach to provide inference using Markov chain Monte Carlo sampling (MCMC). We present \textit{Bayeslands}; a Bayesian framework for Badlands that fuses information obtained from complex forward models with observational data and prior knowledge. As a proof-of-concept, we consider a synthetic and real-world topography with two parameters for Bayeslands inference, namely precipitation and erodibility. The results of the experiments show that Bayeslands yields a promising distribution of the parameters. Moreover, we demonstrate the challenge in sampling irregular and multi-modal posterior distributions using a likelihood surface that has a range of sub-optimal modes.
△ Less
Submitted 5 July, 2021; v1 submitted 2 May, 2018;
originally announced May 2018.
-
Strain Map** of Two-Dimensional Heterostructures with Sub-Picometer Precision
Authors:
Yimo Han,
Kayla Nguyen,
Michael Cao,
Paul Cueva,
Saien Xie,
Mark W. Tate,
Prafull Purohit,
Sol M. Gruner,
Jiwoong Park,
David A. Muller
Abstract:
Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojuncti…
▽ More
Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojunction lattice and strain profiles with sub-picometer precision and to identify dislocations and out-of-plane ripples. We collected diffraction patterns from a focused electron beam for each real-space scan position with a high-speed, high dynamic range, momentum-resolved detector - the electron microscope pixel array detector (EMPAD). The resulting four-dimensional (4D) phase space datasets contain the full spatially resolved lattice information of the sample. By using this technique on tungsten disulfide (WS2) and tungsten diselenide (WSe2) lateral heterostructures, we have mapped lattice distortions with 0.3 pm precision across multi-micron fields of view and simultaneously observed the dislocations and ripples responsible for strain relaxation in 2D laterally-epitaxial structures.
△ Less
Submitted 24 January, 2018;
originally announced January 2018.
-
Theory and Practice of Electron Diffraction from Single Atoms and Extended Objects using an Electron Microscope Pixel Array Detector
Authors:
Michael C. Cao,
Yimo Han,
Zhen Chen,
Yi Jiang,
Kayla X. Nguyen,
Emrah Turgut,
Greg Fuchs,
David A. Muller
Abstract:
What does the diffraction pattern from a single atom look like? How does it differ from the scattering from long range potential? With the development of new high-dynamic range pixel array detectors to measure the complete momentum distribution, these questions have immediate relevance for designing and understanding momentum-resolved imaging modes. We explore the asymptotic limits of long range a…
▽ More
What does the diffraction pattern from a single atom look like? How does it differ from the scattering from long range potential? With the development of new high-dynamic range pixel array detectors to measure the complete momentum distribution, these questions have immediate relevance for designing and understanding momentum-resolved imaging modes. We explore the asymptotic limits of long range and short range potentials. We use a simple quantum mechanical model to explain the general and asymptotic limits for the probability distribution in both and real and reciprocal space. Features in the scattering potential much larger than the probe size cause the bright-field disk to deflect uniformly, while features much smaller than the probe size, instead of a deflection cause a redistribution of intensity within the bright-field disk. Because long range and short range features are encoded differently in the diffraction pattern, it is possible to separate their contributions in differential phase contrast (DPC) or Center-of-Mass (CoM) imaging. The shape profiles for atomic resolution CoM imaging are dominated by the shape of the probe gradient and not the highly-singular atomic potentials or their local fields. Instead, only the peak height shows an atomic-number sensitivity, whose precise dependence is determined by the convergence angle. At lower convergence angles, the contrast oscillates with increasing atomic number, similar to bright field imaging. The range of collection angles impacts DPC and CoM imaging differently, with CoM being more sensitive to the upper cutoff limit, while DPC is more sensitive to the lower cutoff.
△ Less
Submitted 21 November, 2017; v1 submitted 17 November, 2017;
originally announced November 2017.
-
Self-Assembling Oxide Catalyst for Electrochemical Water Splitting
Authors:
Daniel S. Bick,
Andreas Kindsmueller,
Deok-Yong Cho,
Ahmed Yousef Mohamed,
Thomas Bredow,
Hendrik Laufen,
Felix Gunkel,
David N. Mueller,
Theodor Schneller,
Rainer Waser,
Ilia Valov
Abstract:
Renewable energy conversion and storage, and greenhouse gas emission-free technologies are within the primary tasks and challenges for the society. Hydrogen fuel, produced by alkaline water electrolysis is fulfilling all these demands, however the technology is economically feeble, limited by the slow rate of oxygen evolution reaction. Complex metal oxides were suggested to overcome this problem b…
▽ More
Renewable energy conversion and storage, and greenhouse gas emission-free technologies are within the primary tasks and challenges for the society. Hydrogen fuel, produced by alkaline water electrolysis is fulfilling all these demands, however the technology is economically feeble, limited by the slow rate of oxygen evolution reaction. Complex metal oxides were suggested to overcome this problem being low-cost efficient catalysts. However, the insufficient long-term stability, degradation of structure and electrocatalytic activity are restricting their utilization. Here we report on a new perovskite-based self-assembling material BaCo0.98Ti0.02O3-$δ$:Co3O4 with superior performance, showing outstanding properties compared to current state-of-the-art materials without degeneration of its properties even at 353 K. By chemical and structural analysis the degradation mechanism was identified and modified by selective do**. Short-range order and chemical composition rather than long-range order are factors determining the outstanding performance. The derived general design rules can be used for further development of oxide-based electrocatalytic materials.
△ Less
Submitted 11 July, 2017;
originally announced July 2017.
-
JHelioviewer - Time-dependent 3D visualisation of solar and heliospheric data
Authors:
D. Mueller,
B. Nicula,
S. Felix,
F. Verstringe,
B. Bourgoignie,
A. Csillaghy,
D. Berghmans,
P. Jiggens,
J. P. Garcia-Ortiz,
J. Ireland,
S. Zahniy,
B. Fleck
Abstract:
Context. Solar observatories are providing the world-wide community with a wealth of data, covering large time ranges, multiple viewpoints, and returning large amounts of data. In particular, the large volume of SDO data presents challenges: it is available only from a few repositories, and full-disk, full-cadence data for reasonable durations of scientific interest are difficult to download pract…
▽ More
Context. Solar observatories are providing the world-wide community with a wealth of data, covering large time ranges, multiple viewpoints, and returning large amounts of data. In particular, the large volume of SDO data presents challenges: it is available only from a few repositories, and full-disk, full-cadence data for reasonable durations of scientific interest are difficult to download practically due to their size and download data rates available to most users. From a scientist's perspective this poses three problems: accessing, browsing and finding interesting data as efficiently as possible.
Aims. To address these challenges, we have developed JHelioviewer, a visualisation tool for solar data based on the JPEG2000 compression standard and part of the open source ESA/NASA Helioviewer Project. Since the first release of JHelioviewer, the scientific functionality of the software has been extended significantly, and the objective of this paper is to highlight these improvements.
Methods. The JPEG2000 standard offers useful new features that facilitate the dissemination and analysis of high-resolution image data and offers a solution to the challenge of efficiently browsing petabyte-scale image archives. The JHelioviewer software is open source, platform independent and extendable via a plug-in architecture.
Results. With JHelioviewer, users can visualise the Sun for any time period between September 1991 and today. They can perform basic image processing in real time, track features on the Sun and interactively overlay magnetic field extrapolations. The software integrates solar event data and a time line display. As a first step towards supporting science planning of the upcoming Solar Orbiter mission, JHelioviewer offers a virtual camera model that enables users to set the vantage point to the location of a spacecraft or celestial body at any given time.
△ Less
Submitted 1 June, 2017; v1 submitted 22 May, 2017;
originally announced May 2017.
-
Observation of enhanced chiral asymmetries in the inner-shell photoionization of uniaxially oriented methyloxirane enantiomers
Authors:
Maurice Tia,
Martin Pitzer,
Gregor Kastirke,
Janine Gatzke,
Hong-Keun Kim,
Florian Trinter,
Jonas Rist,
Alexander Hartung,
Daniel Trabert,
Juliane Siebert,
Kevin Henrichs,
Jasper Becht,
Stefan Zeller,
Helena Gassert,
Florian Wiegandt,
Robert Wallauer,
Andreas Kuhlins,
Carl Schober,
Tobias Bauer,
Natascha Wechselberger,
Phillip Burzynski,
Jonathan Neff,
Miriam Weller,
Daniel Metz,
Max Kircher
, et al. (16 additional authors not shown)
Abstract:
Most large molecules are chiral in their structure: they exist as two enantiomers, which are mirror images of each other. Whereas the rovibronic sublevels of two enantiomers are almost identical, it turns out that the photoelectric effect is sensitive to the absolute configuration of the ionized enantiomer - an effect termed Photoelectron Circular Dichroism (PECD). Our comprehensive study demonstr…
▽ More
Most large molecules are chiral in their structure: they exist as two enantiomers, which are mirror images of each other. Whereas the rovibronic sublevels of two enantiomers are almost identical, it turns out that the photoelectric effect is sensitive to the absolute configuration of the ionized enantiomer - an effect termed Photoelectron Circular Dichroism (PECD). Our comprehensive study demonstrates that the origin of PECD can be found in the molecular frame electron emission pattern connecting PECD to other fundamental photophysical effects as the circular dichroism in angular distributions (CDAD). Accordingly, orienting a chiral molecule in space enhances the PECD by a factor of about 10.
△ Less
Submitted 16 February, 2017; v1 submitted 13 September, 2016;
originally announced September 2016.
-
Nanomaterial datasets to advance tomography in scanning transmission electron microscopy
Authors:
Barnaby D. A. Levin,
Elliot Padgett,
Chien-Chun Chen,
M. C. Scott,
Rui Xu,
Wolfgang Theis,
Yi Jiang,
Yongsoo Yang,
Colin Ophus,
Haitao Zhang,
Don-Hyung Ha,
Deli Wang,
Yingchao Yu,
Hector D. Abruna,
Richard D. Robinson,
Peter Ercius,
Lena F. Kourkoutis,
Jianwei Miao,
David A. Muller,
Robert Hovden
Abstract:
Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for develo** and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in ord…
▽ More
Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for develo** and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.
△ Less
Submitted 9 June, 2016;
originally announced June 2016.
-
High Dynamic Range Pixel Array Detector for Scanning Transmission Electron Microscopy
Authors:
Mark W. Tate,
Prafull Purohit,
Darol Chamberlain,
Kayla X. Nguyen,
Robert M. Hovden,
Celesta S. Chang,
Pratiti Deb,
Emrah Turgut,
John T. Heron,
Darrell G. Schlom,
Daniel C. Ralph,
Gregory D. Fuchs,
Katherine S. Shanks,
Hugh T. Philipp,
David A. Muller,
Sol M. Gruner
Abstract:
We describe a hybrid pixel array detector (EMPAD - electron microscope pixel array detector) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128 x 128 pixel detector consists of a 500 um thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit (ASIC). The in-pixel ci…
▽ More
We describe a hybrid pixel array detector (EMPAD - electron microscope pixel array detector) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128 x 128 pixel detector consists of a 500 um thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit (ASIC). The in-pixel circuitry provides a 1,000,000:1 dynamic range within a single frame, allowing the direct electron beam to be imaged while still maintaining single electron sensitivity. A 1.1 kHz framing rate enables rapid data collection and minimizes sample drift distortions while scanning. By capturing the entire unsaturated diffraction pattern in scanning mode, one can simultaneously capture bright field, dark field, and phase contrast information, as well as being able to analyze the full scattering distribution, allowing true center of mass imaging. The scattering is recorded on an absolute scale, so that information such as local sample thickness can be directly determined. This paper describes the detector architecture, data acquisition (DAQ) system, and preliminary results from experiments with 80 to 200 keV electron beams.
△ Less
Submitted 11 November, 2015;
originally announced November 2015.