-
Application of Group Method of Data Handling and New Optimization Algorithms for Predicting Sediment Transport Rate under Vegetation Cover
Authors:
Golnaz Mirzakhani,
Elham Ghanbari-Adivi,
Rohollah Fattahi,
Mohammad Ehteram,
Amir Mosavi,
Ali Najah Ahmed,
Ahmed El-Shafieg
Abstract:
Planting vegetation is one of the practical solutions for reducing sediment transfer rates. Increasing vegetation cover decreases environmental pollution and sediment transport rate (STR). Since sediments and vegetation interact complexly, predicting sediment transport rates is challenging. This study aims to predict sediment transport rate under vegetation cover using new and optimized versions o…
▽ More
Planting vegetation is one of the practical solutions for reducing sediment transfer rates. Increasing vegetation cover decreases environmental pollution and sediment transport rate (STR). Since sediments and vegetation interact complexly, predicting sediment transport rates is challenging. This study aims to predict sediment transport rate under vegetation cover using new and optimized versions of the group method of data handling (GMDH). Additionally, this study introduces a new ensemble model for predicting sediment transport rates. Model inputs include wave height, wave velocity, density cover, wave force, D50, the height of vegetation cover, and cover stem diameter. A standalone GMDH model and optimized GMDH models, including GMDH honey badger algorithm (HBA) GMDH rat swarm algorithm (RSOA)vGMDH sine cosine algorithm (SCA), and GMDH particle swarm optimization (GMDH-PSO), were used to predict sediment transport rates. As the next step, the outputs of standalone and optimized GMDH were used to construct an ensemble model. The MAE of the ensemble model was 0.145 m3/s, while the MAEs of GMDH-HBA, GMDH-RSOA, GMDH-SCA, GMDH-PSOA, and GMDH in the testing level were 0.176 m3/s, 0.312 m3/s, 0.367 m3/s, 0.498 m3/s, and 0.612 m3/s, respectively. The Nash Sutcliffe coefficient (NSE) of ensemble model, GMDH-HBA, GMDH-RSOA, GMDH-SCA, GMDH-PSOA, and GHMDH were 0.95 0.93, 0.89, 0.86, 0.82, and 0.76, respectively. Additionally, this study demonstrated that vegetation cover decreased sediment transport rate by 90 percent. The results indicated that the ensemble and GMDH-HBA models could accurately predict sediment transport rates. Based on the results of this study, sediment transport rate can be monitored using the IMM and GMDH-HBA. These results are useful for managing and planning water resources in large basins.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Ionic Transport and Selectivity of Electrokinetically-Actuated Non-Newtonian Flows within a pH-Regulated Rectangular Nanochannel
Authors:
Mohammad Ali Vakili,
Morteza Sadeghi,
Mohammad Hassan Saidi,
Ali Moosavi
Abstract:
In the present study, the ionic transport and selectivity of electrokinetically-driven flow of power-law fluids in a long pH-regulated rectangular nanochannel are analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. Non-linear Poisson-Boltzmann equation along with the association/dissociation reactions on the…
▽ More
In the present study, the ionic transport and selectivity of electrokinetically-driven flow of power-law fluids in a long pH-regulated rectangular nanochannel are analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. Non-linear Poisson-Boltzmann equation along with the association/dissociation reactions on the surface is considered. In addition, numerical simulations with the finite element method in 3D space are performed to compare the results with those obtained from 2D analysis. Moreover, an analytical solution under Debye-Hückel approximation for the limiting case of a slit nanochannel is derived and its results are compared with those obtained from numerical simulations. It is shown that the channel aspect ratio can influence all the physicochemical parameters. It is observed that the mean velocity and the convective ionic conductance are strong descending functions of the flow behavior index. By investigating the non-Newtonian fluid behavior effect, it is revealed that its impact on the ionic conductance becomes significant at high values of the solution pH and its variation can alter the anionic transport direction inside the nanochannel. Moreover, it is shown the flow behavior index can strongly influence the ion selectivity of the nanochannel and its variation can be used to let the selectivity go through its maximum as a function of pH.
△ Less
Submitted 7 November, 2021;
originally announced November 2021.
-
Machine Learning versus Mathematical Model to Estimate the Transverse Shear Stress Distribution in a Rectangular Channel
Authors:
Babak Lashkar-Ara,
Niloofar Kalantari,
Zohreh Sheikh Khozani,
Amir Mosavi
Abstract:
One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the resul…
▽ More
One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the results of the Tsallis entropy, GP and ANFIS models, laboratory observations were used in which shear stress was measured using an optimized Preston tube. This is then used to measure the SSD in various aspect ratios in the rectangular channel. To investigate the shear stress percentage, 10 data series with a total of 112 different data were used. The results of the sensitivity analysis show that the most influential parameter for the SSD in a smooth rectangular channel is the dimensionless parameter B/H, Where the transverse coordinate is B, and the flow depth is H. With the parameters (b/B), (B/H) for the bed and (z/H), (B/H) for the wall as inputs, the modeling of the GP was better than the other one. Based on the analysis, it can be concluded that the use of GP and ANFIS algorithms is more effective in estimating shear stress in smooth rectangular channels than the Tsallis entropy-based equations.
△ Less
Submitted 6 March, 2021;
originally announced March 2021.
-
Application of ERA5 and MENA simulations to predict offshore wind energy potential
Authors:
Shahab Shamshirband,
Amir Mosavi,
Narjes Nabipour,
Kwok-wing Chau
Abstract:
This study explores wind energy resources in different locations through the Gulf of Oman and also their future variability due climate change impacts. In this regard, EC-EARTH near surface wind outputs obtained from CORDEX-MENA simulations are used for historical and future projection of the energy. The ERA5 wind data are employed to assess suitability of the climate model. Moreover, the ERA5 wav…
▽ More
This study explores wind energy resources in different locations through the Gulf of Oman and also their future variability due climate change impacts. In this regard, EC-EARTH near surface wind outputs obtained from CORDEX-MENA simulations are used for historical and future projection of the energy. The ERA5 wind data are employed to assess suitability of the climate model. Moreover, the ERA5 wave data over the study area are applied to compute sea surface roughness as an important variable for converting near surface wind speeds to those of wind speed at turbine hub-height. Considering the power distribution, bathymetry and distance from the coats, some spots as tentative energy hotspots to provide detailed assessment of directional and temporal variability and also to investigate climate change impact studies. RCP8.5 as a common climatic scenario is used to project and extract future variation of the energy in the selected sites. The results of this study demonstrate that the selected locations have a suitable potential for wind power turbine plan and constructions.
△ Less
Submitted 23 February, 2020;
originally announced February 2020.
-
Electrical Characterization of CIGS Thin Film Solar Cells by Two and Four-Wires Probe Technique
Authors:
Amirhosein Mosavi,
Beszedes Bertalan,
Felde Imre,
Laszlo Nadai,
Nima E. Gorji
Abstract:
The characterization of thin film solar cells is of huge importance for obtaining high open circuit voltage and low recombination rates from the interfaces or within the bulk of the main materials. Among the many electrical characterization techniques, the two and four wire probe using the Cascade instrument is of interest since the resistance of the wires, and the electrical contacts can be exclu…
▽ More
The characterization of thin film solar cells is of huge importance for obtaining high open circuit voltage and low recombination rates from the interfaces or within the bulk of the main materials. Among the many electrical characterization techniques, the two and four wire probe using the Cascade instrument is of interest since the resistance of the wires, and the electrical contacts can be excluded by the additional two wires in 4 wire probe configuration. In this paper, both two and four-point probes configuration are employed to characterize the CIGS chalcogenide thin film solar cells. The two wire probe has been used to measure the current-voltage characteristics of the cell which results in a huge internal resistance. Therefore, the four wire connection are also used to eliminate the lead resistance to enhance the characterization accuracy. The load resistance in the twowire probe diminishes the photogenerated current density at smaller voltage ranges. In contrast, the proposed four wire probe collects more current at higher voltages due to enhanced carrier collection efficiency from contact electrodes. The current conduction mechanism is also identified at every voltage region represented by the value of the ideality factor of that voltage region.
△ Less
Submitted 16 December, 2019;
originally announced February 2020.
-
A unifying framework for mean-field theories of asymmetric kinetic Ising systems
Authors:
Miguel Aguilera,
S. Amin Moosavi,
Hideaki Shimazaki
Abstract:
Kinetic Ising models are powerful tools for studying the non-equilibrium dynamics of complex systems. As their behavior is not tractable for large networks, many mean-field methods have been proposed for their analysis, each based on unique assumptions about the system's temporal evolution. This disparity of approaches makes it challenging to systematically advance mean-field methods beyond previo…
▽ More
Kinetic Ising models are powerful tools for studying the non-equilibrium dynamics of complex systems. As their behavior is not tractable for large networks, many mean-field methods have been proposed for their analysis, each based on unique assumptions about the system's temporal evolution. This disparity of approaches makes it challenging to systematically advance mean-field methods beyond previous contributions. Here, we propose a unifying framework for mean-field theories of asymmetric kinetic Ising systems from an information geometry perspective. The framework is built on Plefka expansions of a system around a simplified model obtained by an orthogonal projection to a sub-manifold of tractable probability distributions. This view not only unifies previous methods but also allows us to develop novel methods that, in contrast with traditional approaches, preserve the system's correlations. We show that these new methods can outperform previous ones in predicting and assessing network properties near maximally fluctuating regimes.
△ Less
Submitted 12 May, 2021; v1 submitted 11 February, 2020;
originally announced February 2020.
-
Prediction of Discharge Capacity of Labyrinth Weir with Gene Expression Programming
Authors:
Hossein Bonakdari,
Isa Ebtehaj,
Bahram Gharabaghi,
Ali Sharifi,
Amir Mosavi
Abstract:
This paper proposes a model based on gene expression programming for predicting the discharge coefficient of triangular labyrinth weirs. The parameters influencing discharge coefficient prediction were first examined and presented as crest height ratio to the head over the crest of the weir, a crest length of water to channel width, a crest length of water to the head over the crest of the weir, F…
▽ More
This paper proposes a model based on gene expression programming for predicting the discharge coefficient of triangular labyrinth weirs. The parameters influencing discharge coefficient prediction were first examined and presented as crest height ratio to the head over the crest of the weir, a crest length of water to channel width, a crest length of water to the head over the crest of the weir, Froude number and vertex angle dimensionless parameters. Different models were then presented using sensitivity analysis in order to examine each of the dimensionless parameters presented in this study. In addition, an equation was presented through the use of nonlinear regression (NLR) for the purpose of comparison with GEP. The results of the studies conducted by using different statistical indexes indicated that GEP is more capable than NLR. This is to the extent that GEP predicts the discharge coefficient with an average relative error of approximately 2.5% in such a manner that the predicted values have less than 5% relative error in the worst model.
△ Less
Submitted 15 January, 2020;
originally announced February 2020.
-
Coronary Artery Disease Diagnosis; Ranking the Significant Features Using Random Trees Model
Authors:
Javad Hassannataj Joloudari,
Edris Hassannataj Joloudari,
Hamid Saadatfar,
Mohammad GhasemiGol,
Seyyed Mohammad Razavi,
Amir Mosavi,
Narjes Nabipour,
Shahaboddin Shamshirband,
Laszlo Nadai
Abstract:
Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, the coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of sid…
▽ More
Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, the coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of side effects. Hence, the purpose of this study is to increase the accuracy of coronary heart disease diagnosis through selecting significant predictive features in order of their ranking. In this study, we propose an integrated method using machine learning. The machine learning methods of random trees (RTs), decision tree of C5.0, support vector machine (SVM), decision tree of Chi-squared automatic interaction detection (CHAID) are used in this study. The proposed method shows promising results and the study confirms that RTs model outperforms other models.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Spatial Analysis of Seasonal Precipitation over Iran: Co-Variation with Climate Indices
Authors:
Majid Dehghani,
Somayeh Salehi,
Amir Mosavi,
Narjes Nabipour,
Shahaboddin Shamshirband,
Pedram Ghamisi
Abstract:
Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Niño-S…
▽ More
Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Niño-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO), and North Atlantic Oscillation (NAO) on seasonal precipitation over Iran was investigated. For this purpose, 103 synoptic stations with at least 30 years of data were utilized. The Spearman correlation coefficient between the indices in the previous 12 months with seasonal precipitation was calculated, and the meaningful correlations were extracted. Then the month in which each of these indices has the highest correlation with seasonal precipitation was determined. Finally, the overall amount of increase or decrease in seasonal precipitation due to each of these indices was calculated. Results indicate the Southern Oscillation Index (SOI), NAO, and PDO have the most impact on seasonal precipitation, respectively. Also, these indices have the highest impact on the precipitation in winter, autumn, spring, and summer, respectively. SOI has a diverse impact on winter precipitation compared to the PDO and NAO, while in the other seasons, each index has its special impact on seasonal precipitation. Generally, all indices in different phases may decrease the seasonal precipitation up to 100%. However, the seasonal precipitation may increase more than 100% in different seasons due to the impact of these indices. The results of this study can be used effectively in water resources management and especially in dam operation.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Modeling Climate Change Impact on Wind Power Resources Using Adaptive Neuro-Fuzzy Inference System
Authors:
Narjes Nabipour,
Amir Mosavi,
Eva Hajnal,
Laszlo Nadai,
Shahab Shamshirband,
Kwok-Wing Chau
Abstract:
Climate change impacts and adaptations are the subjects to ongoing issues that attract the attention of many researchers. Insight into the wind power potential in an area and its probable variation due to climate change impacts can provide useful information for energy policymakers and strategists for sustainable development and management of the energy. In this study, spatial variation of wind po…
▽ More
Climate change impacts and adaptations are the subjects to ongoing issues that attract the attention of many researchers. Insight into the wind power potential in an area and its probable variation due to climate change impacts can provide useful information for energy policymakers and strategists for sustainable development and management of the energy. In this study, spatial variation of wind power density at the turbine hub-height and its variability under future climatic scenarios are taken under consideration. An ANFIS based post-processing technique was employed to match the power outputs of the regional climate model with those obtained from the reference data. The near-surface wind data obtained from a regional climate model are employed to investigate climate change impacts on the wind power resources in the Caspian Sea. Subsequent to converting near-surface wind speed to turbine hub-height speed and computation of wind power density, the results have been investigated to reveal mean annual power, seasonal, and monthly variability for a 20-year period in the present (1981-2000) and in the future (2081-2100). The findings of this study indicated that the middle and northern parts of the Caspian Sea are placed with the highest values of wind power. However, the results of the post-processing technique using adaptive neuro-fuzzy inference system (ANFIS) model showed that the real potential of the wind power in the area is lower than those of projected from the regional climate model.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Simulation of Turbulent Flow around a Generic High-Speed Train using Hybrid Models of RANS Numerical Method with Machine Learning
Authors:
Alireza Hajipour,
Arash Mirabdolah Lavasani,
Mohammad Eftekhari Yazdi,
Amir Mosavi,
Shahaboddin Shamshirband,
Kwok-Wing Chau
Abstract:
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes (RANS) equations combined with the turbulence model are applied to solve incompressible turbulent flow around a high-speed train. Flow structure, velocity and p…
▽ More
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes (RANS) equations combined with the turbulence model are applied to solve incompressible turbulent flow around a high-speed train. Flow structure, velocity and pressure contours and streamlines at some typical wind directions are the most important results of this simulation. The maximum and minimum values are specified and discussed. Also, the pressure coefficient for some critical points on the train surface is evaluated. In the following, the wind direction influence the aerodynamic key parameters as drag, lift, and side forces at the mentioned wind directions are analyzed and compared. Moreover, the effects of velocity changes (50, 60, 70, 80 and 90 m/s) are estimated and compared on the above flow and aerodynamic parameters. In the second section of the paper, various data-driven methods including Gene Expression Programming (GEP), Gaussian Process Regression (GPR), and random forest (RF), are applied for predicting output parameters. So, drag, lift, and side forces and also minimum and a maximum of pressure coefficients for mentioned wind directions and velocity are predicted and compared using statistical parameters. Obtained results indicated that RF in all coefficients of wind direction and most coefficients of free stream velocity provided the most accurate predictions. As a conclusion, RF may be recommended for the prediction of aerodynamic coefficients.
△ Less
Submitted 25 December, 2019;
originally announced January 2020.
-
Shear Stress Distribution Prediction in Symmetric Compound Channels Using Data Mining and Machine Learning Models
Authors:
Zohreh Sheikh Khozani,
Khabat Khosravi,
Mohammadamin Torabi,
Amir Mosavi,
Bahram Rezaei,
Timon Rabczuk
Abstract:
Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels. In this study, at first, a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels. The shear stress values around the whole wetted perimeter were measured in the compound c…
▽ More
Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels. In this study, at first, a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels. The shear stress values around the whole wetted perimeter were measured in the compound channel with different floodplain widths also in different flow depths in subcritical and supercritical conditions. A set of, data mining and machine learning models including Random Forest (RF), M5P, Random Committee (RC), KStar and Additive Regression Model (AR) implemented on attained data to predict the shear stress distribution in the compound channel. Results indicated among these five models, RF method indicated the most precise results with the highest R2 value of 0.9. Finally, the most powerful data mining method which studied in this research (RF) compared with two well-known analytical models of Shiono and Knight Method (SKM) and Shannon method to acquire the proposed model functioning in predicting the shear stress distribution. The results showed that the RF model has the best prediction performance compared to SKM and Shannon models.
△ Less
Submitted 20 December, 2019;
originally announced January 2020.
-
Applying ANN, ANFIS, and LSSVM Models for Estimation of Acid Solvent Solubility in Supercritical CO$_2$
Authors:
Amin Bemani,
Alireza Baghban,
Shahaboddin Shamshirband,
Amir Mosavi,
Peter Csiba,
Annamaria R. Varkonyi-Koczy
Abstract:
In the present work, a novel and the robust computational investigation is carried out to estimate solubility of different acids in supercritical carbon dioxide. Four different algorithms such as radial basis function artificial neural network, Multi-layer Perceptron (MLP) artificial neural network (ANN), Least squares support vector machine (LSSVM) and adaptive neuro-fuzzy inference system (ANFIS…
▽ More
In the present work, a novel and the robust computational investigation is carried out to estimate solubility of different acids in supercritical carbon dioxide. Four different algorithms such as radial basis function artificial neural network, Multi-layer Perceptron (MLP) artificial neural network (ANN), Least squares support vector machine (LSSVM) and adaptive neuro-fuzzy inference system (ANFIS) are developed to predict the solubility of different acids in carbon dioxide based on the temperature, pressure, hydrogen number, carbon number, molecular weight, and acid dissociation constant of acid. In the purpose of best evaluation of proposed models, different graphical and statistical analyses and also a novel sensitivity analysis are carried out. The present study proposed the great manners for best acid solubility estimation in supercritical carbon dioxide, which can be helpful for engineers and chemists to predict operational conditions in industries.
△ Less
Submitted 21 November, 2019;
originally announced December 2019.
-
Modeling Daily Pan Evaporation in Humid Climates Using Gaussian Process Regression
Authors:
Sevda Shabani,
Saeed Samadianfard,
Mohammad Taghi Sattari,
Shahab Shamshirband,
Amir Mosavi,
Tibor Kmet,
Annamaria R. Varkonyi-Koczy
Abstract:
Evaporation is one of the main processes in the hydrological cycle, and it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, the evaporation is a complex and nonlinear phenomenon; therefore, the data-based methods can be used to have precise estimations of it. In this regard, in the present study, Ga…
▽ More
Evaporation is one of the main processes in the hydrological cycle, and it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, the evaporation is a complex and nonlinear phenomenon; therefore, the data-based methods can be used to have precise estimations of it. In this regard, in the present study, Gaussian Process Regression, Nearest-Neighbor, Random Forest and Support Vector Regression were used to estimate the pan evaporation in the meteorological stations of Golestan Province, Iran. For this purpose, meteorological data including PE, temperature, relative humidity, wind speed and sunny hours collected from the Gonbad-e Kavus, Gorgan and Bandar Torkman stations from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error, correlation coefficient and Mean Absolute Error. Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. We report that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W, and S had the most accurate performances and proposed for precise estimation of PE. Due to the high rate of evaporation in Iran and the lack of measurement instruments, the findings of the current study indicated that the PE values might be estimated with few easily measured meteorological parameters accurately.
△ Less
Submitted 1 August, 2019;
originally announced August 2019.
-
Experimental Estimation of Temporal and Spatial Resolution of Coefficient of Heat Transfer in a Channel Using Inverse Heat Transfer Method
Authors:
Majid Karami,
Somayeh Davoodabadi Farahani,
Farshad Kowsary,
Amir Mosavi
Abstract:
In this research, a novel method to investigation the transient heat transfer coefficient in a channel is suggested experimentally, in which the water flow, itself, is considered both just liquid phase and liquid-vapor phase. The experiments were designed to predict the temporal and spatial resolution of Nusselt number. The inverse technique method is non-intrusive, in which time history of temper…
▽ More
In this research, a novel method to investigation the transient heat transfer coefficient in a channel is suggested experimentally, in which the water flow, itself, is considered both just liquid phase and liquid-vapor phase. The experiments were designed to predict the temporal and spatial resolution of Nusselt number. The inverse technique method is non-intrusive, in which time history of temperature is measured, using some thermocouples within the wall to provide input data for the inverse algorithm. The conjugate gradient method is used mostly as an inverse method. The temporal and spatial changes of heat flux, Nusselt number, vapor quality, convection number, and boiling number have all been estimated, showing that the estimated local Nusselt numbers of flow for without and with phase change are close to those predicted from the correlations of Churchill and Ozoe (1973) and Kandlikar (1990), respectively. This study suggests that the extended inverse technique can be successfully utilized to calculate the local time-dependent heat transfer coefficient of boiling flow.
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
Thermodynamic approach to holographic dark energy and the Rényi entropy
Authors:
H. Moradpour,
S. A. Moosavi,
I. P. Lobo,
J. P. Morais Graça,
A. Jawad,
I. G. Salako
Abstract:
Using the first law of thermodynamics, we propose a relation between the system entropy ($S$) and its IR ($L$) and UV ($Λ$) cutoffs. In addition, applying this relation to the apparent horizon of flat FRW universe, whose entropy meets the Rényi entropy, a new holographic dark energy model is addressed. Thereinafter, the evolution of the flat FRW universe, filled by a pressureless source and the ob…
▽ More
Using the first law of thermodynamics, we propose a relation between the system entropy ($S$) and its IR ($L$) and UV ($Λ$) cutoffs. In addition, applying this relation to the apparent horizon of flat FRW universe, whose entropy meets the Rényi entropy, a new holographic dark energy model is addressed. Thereinafter, the evolution of the flat FRW universe, filled by a pressureless source and the obtained dark energy candidate, is studied. In our model, there is no mutual interaction between the cosmos sectors. We find out that the obtained model is theoretically powerful to explain the current accelerated phase of the universe. This result emphasizes that the generalized entropy formalism is suitable for describing systems including the long-range interactions such as gravity.
△ Less
Submitted 5 October, 2018; v1 submitted 28 February, 2018;
originally announced March 2018.
-
A Learning Based Approach for Uncertainty Analysis in Numerical Weather Prediction Models
Authors:
Azam Moosavi,
Vishwas Rao,
Adrian Sandu
Abstract:
Complex numerical weather prediction models incorporate a variety of physical processes, each described by multiple alternative physical schemes with specific parameters. The selection of the physical schemes and the choice of the corresponding physical parameters during model configuration can significantly impact the accuracy of model forecasts. There is no combination of physical schemes that w…
▽ More
Complex numerical weather prediction models incorporate a variety of physical processes, each described by multiple alternative physical schemes with specific parameters. The selection of the physical schemes and the choice of the corresponding physical parameters during model configuration can significantly impact the accuracy of model forecasts. There is no combination of physical schemes that works best for all times, at all locations, and under all conditions. It is therefore of considerable interest to understand the interplay between the choice of physics and the accuracy of the resulting forecasts under different conditions. This paper demonstrates the use of machine learning techniques to study the uncertainty in numerical weather prediction models due to the interaction of multiple physical processes. The first problem addressed herein is the estimation of systematic model errors in output quantities of interest at future times, and the use of this information to improve the model forecasts. The second problem considered is the identification of those specific physical processes that contribute most to the forecast uncertainty in the quantity of interest under specified meteorological conditions.
The discrepancies between model results and observations at past times are used to learn the relationships between the choice of physical processes and the resulting forecast errors. Numerical experiments are carried out with the Weather Research and Forecasting (WRF) model. The output quantity of interest is the model precipitation, a variable that is both extremely important and very challenging to forecast. The physical processes under consideration include various micro-physics schemes, cumulus parameterizations, short wave, and long wave radiation schemes. The experiments demonstrate the strong potential of machine learning approaches to aid the study of model errors.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
