-
Secondary Neutron Production from Thick Target Deuteron Breakup
Authors:
Jonathan T. Morrell,
Andrew S. Voyles,
Jon C. Batchelder,
Joshua A. Brown,
Lee A. Bernstein
Abstract:
Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have bee…
▽ More
Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have been measured on a thick beryllium target at $ε_d=33$ and 40 MeV, using both time-of-flight and activation techniques. We have also introduced a simple hybrid model for the double-differential deuteron breakup cross section, applicable in the $ε_d=10$--$100$ MeV energy range on light ($Z\leq 6$) targets. This model features four empirical parameters that have been fit to reproduce experimental breakup measurements on beryllium targets, using the method of least-squares. It was shown that these parameters extrapolate well to higher energies, and to other low-Z target materials. We also include optimization of the parameters that modify the Kalbach systematics for compound and pre-equilibrium reactions, in order to better reproduce the experimental data for beryllium targets at large angles.
△ Less
Submitted 30 November, 2022;
originally announced December 2022.
-
Preparation and Characterization of Thin Arsenic Targets for Stacked-Target Experiments
Authors:
Andrew S. Voyles,
Morgan B. Fox,
Jonathan T. Morrell,
Michael P. Zach,
Evan K. Still,
Lee A. Bernstein,
Wesley D. Frey,
Burton J. Mehciz
Abstract:
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m).…
▽ More
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m). Examination of electrodeposit surface morphology by scanning electron microscopy and microanalysis was performed to investigate the uniformity of produced targets. Brief studies of plating growth dynamics and structural properties through cyclic voltammetry were also undertaken. Alternative target fabrication approaches by vapor deposition and electrodeposition from a deep eutectic solvent were additionally conducted. We further introduce a non-destructive characterization method for thin targets by neutron activation, which is independent of neutron flux shape, environmental factors, and source geometry, while correcting for any potential scatter or absorption effects.
△ Less
Submitted 15 February, 2024; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Measurement of $^{139}$La(p,x) Cross Sections from 35-60 MeV by Stacked-Target Activation
Authors:
Jonathan T. Morrell,
Andrew S. Voyles,
M. S. Basunia,
Jon C. Batchelder,
Eric F. Matthews,
Lee A. Bernstein
Abstract:
A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide…
▽ More
A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide $^{225}$Ac, $^{134}$Ce is desirable for in vivo applications of bio-distribution assays for this emerging radio-pharmaceutical. The results of this measurement were compared to the nuclear model codes TALYS, EMPIRE and ALICE (using default parameters), which showed significant deviation from the measured values.
△ Less
Submitted 1 August, 2019; v1 submitted 9 July, 2019;
originally announced July 2019.
-
Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology
Authors:
Mauricio Ayllon,
Parker A. Adams,
Joseph D. Bauer,
Jon C. Batchelder,
Tim A. Becker,
Lee A. Bernstein,
Su-Ann Chong,
Jay James,
Leo E. Kirsch,
Ka-Ngo Leung,
Eric F. Matthews,
Jonathan T. Morrell,
Paul R. Renne,
Andrew M. Rogers,
Daniel Rutte,
Andrew S. Voyles,
Karl Van Bibber,
Cory S. Waltz
Abstract:
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near futu…
▽ More
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm2/s). The generator's maximum neutron flux at this irradiation position is 2.58e7 n/cm2/s +/- 5% (approximately 3e8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG.
△ Less
Submitted 9 April, 2018; v1 submitted 9 March, 2018;
originally announced March 2018.
-
Performance of Several Solid State Photomultipliers with CLYC Scintillator
Authors:
Katherine E. Mesick,
Laura C. Stonehill,
Jonathan T. Morrell,
Daniel D. S. Coupland
Abstract:
$Cs_2LiYCl_6:Ce^{3+}…
▽ More
$Cs_2LiYCl_6:Ce^{3+}$ (CLYC) is an inorganic scintillator that has recently garnered attention for its ability to detect and discriminate between gammas and thermal neutrons. We investigate several important performance parameters of three different solid state photomultipliers (SSPMs) when reading out CLYC crystals: linearity, energy resolution, and pulse shape and discrimination ability. These performance parameters are assessed at a variety of temperatures between -20$^{\circ}$C and +50$^{\circ}$C.
△ Less
Submitted 3 December, 2015;
originally announced December 2015.