-
Ferromagnetic semimetal and charge-density wave phases of interacting electrons in a honeycomb moiré potential
Authors:
Yubo Yang,
Miguel A. Morales,
Shiwei Zhang
Abstract:
The exploration of quantum phases in moiré systems has drawn intense experimental and theoretical efforts. The realization of honeycomb symmetry has been a recent focus. The combination of strong interaction and honeycomb symmetry can lead to exotic electronic states such as fractional Chern insulator, unconventional superconductor, and quantum spin liquid. Accurate computations in such systems, w…
▽ More
The exploration of quantum phases in moiré systems has drawn intense experimental and theoretical efforts. The realization of honeycomb symmetry has been a recent focus. The combination of strong interaction and honeycomb symmetry can lead to exotic electronic states such as fractional Chern insulator, unconventional superconductor, and quantum spin liquid. Accurate computations in such systems, with reliable treatment of strong long-ranged Coulomb interaction and approaching the large system sizes to extract thermodynamic phases, are mostly missing. We study the two-dimensional electron gas on a honeycomb moiré lattice at quarter filling, using fixed-phase diffusion Monte Carlo. The ground state phases of this important model are determined in the parameter regime relevant to current experiments. With increasing moiré potential, the systems transitions from a paramagnetic metal to an itinerant ferromagnetic semimetal and then a charge-density-wave insulator.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Ground state phases of the two-dimension electron gas with a unified variational approach
Authors:
Conor Smith,
Yixiao Chen,
Ryan Levy,
Yubo Yang,
Miguel A. Morales,
Shiwei Zhang
Abstract:
The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a gen…
▽ More
The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a general backflow-type wave function using a message-passing neural quantum state architecture, for a unified description across the entire density range. The variational optimization consistently leads to lower ground-state energies than previous best results. Transition into a Wigner crystal (WC) phase occurs automatically at rs = 37 +/- 1, a density lower than currently believed. Between the liquid and WC phases, the same ansatz and variational search strongly suggest the existence of intermediate states in a broad range of densities, with enhanced short-range nematic spin correlations.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Tensor hypercontraction for fully self-consistent imaginary-time GF2 and GWSOX methods: theory, implementation, and role of the Green's function second-order exchange for intermolecular interactions
Authors:
Pavel Pokhilko,
Chia-Nan Yeh,
Miguel A. Morales,
Dominika Zgid
Abstract:
We apply tensor hypercontraction (THC) to reduce the computational scaling of expensive fully self-consistent Green's function methods. We present an efficient MPI-parallel algorithm and its implementation for evaluating the correlated second-order exchange term (SOX). This approach enabled us to conduct the largest fully self-consistent calculations with over 1100 atomic orbitals (AOs), with negl…
▽ More
We apply tensor hypercontraction (THC) to reduce the computational scaling of expensive fully self-consistent Green's function methods. We present an efficient MPI-parallel algorithm and its implementation for evaluating the correlated second-order exchange term (SOX). This approach enabled us to conduct the largest fully self-consistent calculations with over 1100 atomic orbitals (AOs), with negligible errors attributed to THC fitting. Utilizing our THC implementation for scGW, scGF2, and scGWSOX (GW plus the SOX term iterated to achieve full Green's function self-consistency), we evaluated energies of intermolecular interactions. This approach allowed us to circumvent issues related to reference dependence and ambiguity in energy evaluation, which are common challenges in non-self-consistent calculations. We demonstrate that scGW exhibits a slight overbinding tendency for large systems, contrary to the underbinding observed with non-self-consistent RPA. Conversely, scGWSOX exhibits a slight underbinding tendency for such systems. This behavior is both physical and systematic and is caused by exclusion-principle violating diagrams or corresponding corrections. Our analysis elucidates the role played by these different diagrams, which is crucial for the construction of rigorous, accurate, and systematic methods. Finally, we explicitly show that all perturbative fully self-consistent Green's function methods are size-extensive.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Unravelling the polarity of InN quantum dots using a modified approach of negative-spherical-aberration imaging
Authors:
Piu Rajak,
Mahabul Islam,
J. J. Jiménez,
J. M. Mánuel,
P. Aseev,
Ž. Gačević,
E. Calleja,
R. García,
Francisco M. Morales,
Somnath Bhattacharyya
Abstract:
InN quantum dots (QDs) are considered to be promising nanostructures for different device applications. For any hexagonal AB stacking semiconductor system, polarity is an important feature which affects the electronic properties. Therefore, the determination of this characteristic on any wurtzite (semi)polar III nitride compound or alloy is essential for defining its applicability. In this paper,…
▽ More
InN quantum dots (QDs) are considered to be promising nanostructures for different device applications. For any hexagonal AB stacking semiconductor system, polarity is an important feature which affects the electronic properties. Therefore, the determination of this characteristic on any wurtzite (semi)polar III nitride compound or alloy is essential for defining its applicability. In this paper, the polarity of InN QDs grown on silicon by indium droplet epitaxy plus nitridation and annealing was determined by a modified approach combining exit wave reconstruction with negative spherical aberration high resolution lattice imaging using TEM. Comparing the micrographs of two QDs from the same TEM specimen with the simulated images of InN slab structures generated under the same conditions as of the experiments, it was confirmed that the QDs of the present study are N polar. Given that the settlement of material's polarity has always been a tedious, indirect and controversial issue, the major value of our proposal is to provide a straightforward procedure to determine the polar direction from atomic-resolution focal series images.
△ Less
Submitted 31 January, 2024;
originally announced February 2024.
-
Low-Scaling algorithms for $GW$ and constrained random phase approximation using symmetry-adapted interpolative separable density fitting
Authors:
Chia-Nan Yeh,
Miguel A. Morales
Abstract:
We present low-scaling algorithms for $GW$ and constrained random phase approximation based on a symmetry-adapted interpolative separable density fitting (ISDF) procedure that incorporates the space-group symmetries of crystalline systems. The resulting formulations scale cubically with respect to system sizes and linearly with the number of $\mathbf{k}$-points, regardless of the choice of single-…
▽ More
We present low-scaling algorithms for $GW$ and constrained random phase approximation based on a symmetry-adapted interpolative separable density fitting (ISDF) procedure that incorporates the space-group symmetries of crystalline systems. The resulting formulations scale cubically with respect to system sizes and linearly with the number of $\mathbf{k}$-points, regardless of the choice of single-particle basis and whether a quasiparticle approximation is employed. We validate these methods through comparisons with published literature and demonstrate their efficiency in treating large-scale systems through the construction of downfolded many-body Hamiltonians for carbon dimer defects embedded in hexagonal boron nitride supercells. Our work highlights the efficiency and general applicability of ISDF in the context of large-scale many-body calculations with $\mathbf{k}$-point sampling beyond density functional theory.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Cryogenic RPWELL: a novel charge-readout element for dual-phase argon TPCs
Authors:
A. Tesi,
S. Leardini,
L. Moleri,
M. Morales,
D. Gonzalez-Diaz,
A. Jash,
A. Breskin,
S. Bressler
Abstract:
The first operation of a cryogenic Resistive Plate WELL (RPWELL) detector in the saturated vapor of liquid argon is reported. The RPWELL detector was composed of a Thick Gas Electron Multiplier (THGEM) electrode coupled to a metallic anode via Fe$_2$O$_3$/YSZ ceramics (Fe$_2$O$_3$ in weight equal to 75$\%$), with tunable bulk resistivity in the range 10$^{9}$ - 10$^{12}$ $Ω\cdot$cm. The detector w…
▽ More
The first operation of a cryogenic Resistive Plate WELL (RPWELL) detector in the saturated vapor of liquid argon is reported. The RPWELL detector was composed of a Thick Gas Electron Multiplier (THGEM) electrode coupled to a metallic anode via Fe$_2$O$_3$/YSZ ceramics (Fe$_2$O$_3$ in weight equal to 75$\%$), with tunable bulk resistivity in the range 10$^{9}$ - 10$^{12}$ $Ω\cdot$cm. The detector was operated at liquid argon temperature in saturated argon vapor (90~K, 1.2~bar) and characterized in terms of its effective charge gain and stability against discharges. Maximum stable gain of G$\approx$17 was obtained, without discharges. In addition, preliminary results from novel 3D-printed thermoplastic plates doped with carbon nanotubes are presented.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
Automatic Order Detection and Restoration Through Systematically Improvable Variational Wave Functions
Authors:
Ryan Levy,
Miguel A. Morales,
Shiwei Zhang
Abstract:
Variational wave function ansatze are an invaluable tool to study the properties of strongly correlated systems. We propose such a wave function, based on the theory of auxiliary fields and combining aspects of auxiliary-field quantum Monte Carlo and modern variational optimization techniques including automatic differentiation. The resulting ansatz, consisting of several slices of optimized proje…
▽ More
Variational wave function ansatze are an invaluable tool to study the properties of strongly correlated systems. We propose such a wave function, based on the theory of auxiliary fields and combining aspects of auxiliary-field quantum Monte Carlo and modern variational optimization techniques including automatic differentiation. The resulting ansatz, consisting of several slices of optimized projectors, is highly expressive and systematically improvable. We benchmark this form on the two-dimensional Hubbard model, using both cylindrical and large, fully periodic supercells. The computed ground-state energies are competitive with the best variational results. Moreover, the optimized wave functions predict the correct ground-state order with near full symmetry restoration (i.e. translation invariance) despite initial states with incorrect orders. The ansatz can become a tool for local order prediction, leading to a new paradigm for variational studies of bulk systems. It can also be viewed as an approach to produce accurate and systematically improvable wave functions in a convenient form of non-orthogonal Slater determinants (e.g., for quantum chemistry) at polynomial computational cost.
△ Less
Submitted 9 February, 2024; v1 submitted 16 August, 2023;
originally announced August 2023.
-
Algorithm for branching and population control in correlated sampling
Authors:
Siyuan Chen,
Yiqi Yang,
Miguel Morales,
Shiwei Zhang
Abstract:
Correlated sampling has wide-ranging applications in Monte Carlo calculations. When branching random walks are involved, as commonly found in many algorithms in quantum physics and electronic structure, population control is typically not applied with correlated sampling due to technical difficulties. This hinders the stability and efficiency of correlated sampling. In this work, we study schemes…
▽ More
Correlated sampling has wide-ranging applications in Monte Carlo calculations. When branching random walks are involved, as commonly found in many algorithms in quantum physics and electronic structure, population control is typically not applied with correlated sampling due to technical difficulties. This hinders the stability and efficiency of correlated sampling. In this work, we study schemes for allowing birth/death in correlated sampling and propose an algorithm for population control. The algorithm can be realized in several variants depending on the application. One variant is a static method that creates a reference run and allows other correlated calculations to be added a posteriori. Another optimizes the population control for a set of correlated, concurrent runs dynamically. These approaches are tested in different applications in quantum systems, including both the Hubbard model and electronic structure calculations in real materials.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
A device-independent approach to evaluate the heating performance during magnetic hyperthermia experiments: peak analysis and zigzag protocol
Authors:
Sergiu Ruta,
Yilian Fernández-Afonso,
Samuel E. Rannala,
M. Puerto Morales,
Sabino Veintemillas-Verdaguer,
Carlton Jones,
Lucía Gutiérre,
Roy W Chantrell,
David Serantes
Abstract:
Accurate knowledge of the heating performance of magnetic nanoparticles (MNPs) under AC fields is critical for the development of hyperthermia-mediated applications. Usually reported in terms of the specific loss power (SLP) obtained from the temperature variation ($Δ{T}$) vs. time (t) curve, such estimate is subjected to a huge uncertainty. Thus, very different SLP values are reported for the sam…
▽ More
Accurate knowledge of the heating performance of magnetic nanoparticles (MNPs) under AC fields is critical for the development of hyperthermia-mediated applications. Usually reported in terms of the specific loss power (SLP) obtained from the temperature variation ($Δ{T}$) vs. time (t) curve, such estimate is subjected to a huge uncertainty. Thus, very different SLP values are reported for the same particles when measured on different equipment/laboratories. This lack of control clearly hampers the further development of MNP-mediated heat-triggered technologies. Here we report a device-independent approach to calculate the SLP value of a suspension of MNPs: the SLP is obtained from the analysis of the peak at the field on/off switch of the $Δ{T}(t)$ curve. The measurement procedure, which itself constitutes a change of paradigm within the field, is based on fundamental physics considerations: specifically to guarantee the applicability of Newton's law of cooling, as i) it corresponds to the ideal scenario in which the temperature profiles of the system during heating and cooling are the same; and ii) it diminishes the role of coexistence of various heat dissipation channels. Such an approach is supported by theoretical and computational calculations to increase the reliability and reproducibility of SLP determination. This is experimentally confirmed, demonstrating a reduction in SLP variation across 3 different devices located in 3 different laboratories. Furthermore, the application of this peak analysis method (PAM) to a rapid succession of field on/off switches that result in a zigzag-like $Δ{T}(t)$, which we term the zigzag protocol, allows evaluating possible variations of the SLP values with time or temperature.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Toward an accurate equation of state and B1-B2 phase boundary for magnesium oxide to TPa pressures and eV temperatures
Authors:
Shuai Zhang,
Reetam Paul,
S. X. Hu,
Miguel A. Morales
Abstract:
By applying auxiliary-field quantum Monte Carlo, we calculate the equation of state (EOS) and B1-B2 phase transition of magnesium oxide (MgO) up to 1 TPa. The results agree with available experimental data at low pressures and are used to benchmark the performance of various exchange-correlation functionals in density functional theory calculations. We determine PBEsol is an optimal choice for the…
▽ More
By applying auxiliary-field quantum Monte Carlo, we calculate the equation of state (EOS) and B1-B2 phase transition of magnesium oxide (MgO) up to 1 TPa. The results agree with available experimental data at low pressures and are used to benchmark the performance of various exchange-correlation functionals in density functional theory calculations. We determine PBEsol is an optimal choice for the exchange-correlation functional and perform extensive phonon and quantum molecular-dynamics calculations to obtain the thermal EOS. Our results provide a preliminary reference for the EOS and B1-B2 phase boundary of MgO from zero up to 10,500 K.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Low-Scaling Algorithm for the Random Phase Approximation using Tensor Hypercontraction with k-point Sampling
Authors:
Chia-Nan Yeh,
Miguel A. Morales
Abstract:
We present a low-scaling algorithm for the random phase approximation (RPA) with \textbf{k}-point sampling in the framework of tensor hypercontraction (THC) for electron repulsion integrals (ERIs). The THC factorization is obtained via a revised interpolative separable density fitting (ISDF) procedure with a momentum-dependent auxiliary basis for generic single-particle Bloch orbitals. Our formula…
▽ More
We present a low-scaling algorithm for the random phase approximation (RPA) with \textbf{k}-point sampling in the framework of tensor hypercontraction (THC) for electron repulsion integrals (ERIs). The THC factorization is obtained via a revised interpolative separable density fitting (ISDF) procedure with a momentum-dependent auxiliary basis for generic single-particle Bloch orbitals. Our formulation does not require pre-optimized interpolating points nor auxiliary bases, and the accuracy is systematically controlled by the number of interpolating points. The resulting RPA algorithm scales linearly with the number of \textbf{k}-points and cubically with the system size without any assumption on sparsity or locality of orbitals. The errors of ERIs and RPA energy show rapid convergence with respect to the size of the THC auxiliary basis, suggesting a promising and robust direction to construct efficient algorithms of higher-order many-body perturbation theories for large-scale systems.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Development of Fe$_2$O$_3$/YSZ ceramic plates for cryogenic operation of resistive-protected gaseous detectors
Authors:
L. Olano-Vegas,
I. Pardo,
S. Leardini,
M. Morales,
A. R. Carreira,
R. M. Corral,
D. González-Díaz,
A. Tesi,
L. Moleri,
C. D. R. Azevedo,
L. Carramate,
F. Guitián
Abstract:
We present a ceramic material based on hematite (Fe$_2$O$_3$) and zirconia stabilized with yttria at 8% molar (YSZ), that exhibits stable electrical properties with transported charge and that can be tuned to the resistivities necessary to induce spark-quenching in gaseous detectors ($ρ= 10^9-10^{12}$ $Ω\cdot$cm), from room temperature down to the liquid-vapor coexistence point of nitrogen (77 K).…
▽ More
We present a ceramic material based on hematite (Fe$_2$O$_3$) and zirconia stabilized with yttria at 8% molar (YSZ), that exhibits stable electrical properties with transported charge and that can be tuned to the resistivities necessary to induce spark-quenching in gaseous detectors ($ρ= 10^9-10^{12}$ $Ω\cdot$cm), from room temperature down to the liquid-vapor coexistence point of nitrogen (77 K). It, thus, allows covering the operating temperatures of most immediate interest to gaseous instrumentation. The ceramics have been produced in a region of mass concentrations far from what has been usually explored in literature: optimal characteristics are achieved for Fe$_2$O$_3$ concentrations of 75%wt (LAr boiling temperature), 35%wt (LXe boiling temperature), and 100%wt (room temperature). The nine order of magnitude enhancement observed for the electrical conductivity of the mixed phases relative to that of pure Fe$_2$O$_3$ is startling, however it can be qualitatively understood based on existing literature. Plates of 4 cm x 4 cm have been manufactured and, prior to this work, operated in-detector at the LXe boiling point (165 K), demonstrating spark-free operation. Preliminary results obtained for the first time on a spark-protected amplification structure (RP-WELL) at around the LAr boiling point (90 K) are now presented, too.
△ Less
Submitted 28 October, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
L. Barcellan,
C. Baldanza,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
A. Bergnoli,
L. C. Blanco Ramos,
L. Borgonovi,
A. Bragagnolo,
V. Cafaro,
A. Calderon,
E. Calvo,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo,
J. M. Cela Ruiz
, et al. (121 additional authors not shown)
Abstract:
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s…
▽ More
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
Diamond-like carbon coatings for cryogenic operation of particle detectors
Authors:
Sara Leardini,
Yi Zhou,
Andrea Tesi,
Miguel Morales,
Diego González-Díaz,
Amos Breskin,
Shikma Bressler,
Luca Moleri,
Vladimir Peskov
Abstract:
Characterization of diamond-like carbon (DLC) coatings at cryogenic temperatures (down to 77 K) is presented, covering the electrical resistivity range of practical interest to gaseous and liquid particle instrumentation: 10^-1-10^5 Mohm/sq. The good behaviour observed in terms of linearity, surface uniformity and stability with time and transported charge add to other well-known characteristics l…
▽ More
Characterization of diamond-like carbon (DLC) coatings at cryogenic temperatures (down to 77 K) is presented, covering the electrical resistivity range of practical interest to gaseous and liquid particle instrumentation: 10^-1-10^5 Mohm/sq. The good behaviour observed in terms of linearity, surface uniformity and stability with time and transported charge add to other well-known characteristics like low chemical reactivity and tolerance to radiation. The observed temperature dependence and stability of electrical properties with transported charge is consistent with a conductivity mechanism based on 2-dimensional variable-range electron hop**, as expected for the surface conductivity of thin films made from amorphous carbon. First results from a resistive-protected WELL detector ('RWELL') built with DLC and operated close to the liquid-vapor coexistence point of argon (87.5 K at 1 bar) are presented.
△ Less
Submitted 22 January, 2023; v1 submitted 30 September, 2022;
originally announced September 2022.
-
What X-ray absorption spectroscopy can tell us about the active state of earth-abundant electrocatalysts for the oxygen evolution reaction
Authors:
Marcel Risch,
Dulce M. Morales,
Javier Villalobos,
Denis Antipin
Abstract:
Chemical energy storage is an attractive solution to secure a sustainable energy supply. It requires an electrocatalyst to be implemented efficiently. In order to rationally improve the electrocatalyst materials and thereby the reaction efficiency, one must reveal the nature of the electrocatalyst under reaction conditions, i.e., its active state. For a better understanding of earth-abundant metal…
▽ More
Chemical energy storage is an attractive solution to secure a sustainable energy supply. It requires an electrocatalyst to be implemented efficiently. In order to rationally improve the electrocatalyst materials and thereby the reaction efficiency, one must reveal the nature of the electrocatalyst under reaction conditions, i.e., its active state. For a better understanding of earth-abundant metal oxides as electrocatalysts for the oxygen evolution reaction (OER), the combination of electrochemical (EC) methods and X-ray absorption spectroscopy (XAS) has been very insightful and still holds untapped potential. Herein, we concisely introduce the basics of EC and XAS and provide the necessary framework to discuss changes that electrocatalytic materials undergo, presenting manganese oxides as examples. Such changes may occur during preparation and storage, during immersion in an electrolyte, as well as during application of potentials without or with catalytic reactions. We conclude with a concise summary of how EC and XAS are currently combined to elucidate the active state as well as an outlook on future opportunities to understand the mechanisms of electrocatalysis using combined operando EC-XAS experiments.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Stabilization of Co oxide during oxygen evolution in alkaline media by the introduction of Mn oxide
Authors:
Javier Villalobos,
Dulce M. Morales,
Denis Antipin,
Götz Schuck,
Ronny Golnak,
Jie Xiao,
Marcel Risch
Abstract:
Improving the stability of electrocatalysts for the oxygen evolution reaction (OER) through materials design has received less attention than improving their catalytic activity. We explored the effect of Mn addition to a cobalt oxide for stabilizing the catalyst by comparing Na-containing CoOx and (Co0.7Mn0.3)Ox films electrodeposited in alkaline solution. The obtained disordered films were classi…
▽ More
Improving the stability of electrocatalysts for the oxygen evolution reaction (OER) through materials design has received less attention than improving their catalytic activity. We explored the effect of Mn addition to a cobalt oxide for stabilizing the catalyst by comparing Na-containing CoOx and (Co0.7Mn0.3)Ox films electrodeposited in alkaline solution. The obtained disordered films were classified as layered oxides using X-ray absorption spectroscopy (XAS). The CoOx films showed a constant decrease in the catalytic activity during cycling, confirmed by oxygen detection, while that of (Co0.7Mn0.3)Ox slightly increased as measured by electrochemical metrics. These trends were rationalized based on XAS analysis of the metal oxidation states, which were Co2.8+ and Mn3.7+ near the surface after cycling. Thus, adding Mn to CoOx successfully stabilized the catalyst material and its activity during OER cycling. The development of stabilization approaches is essential to extend the durability of OER catalysts.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Nature of the bonded-to-atomic transition in liquid silica to TPa pressures
Authors:
Shuai Zhang,
Miguel A. Morales,
Raymond Jeanloz,
Marius Millot,
S. X. Hu,
Eva Zurek
Abstract:
First-principles calculations and analysis of the thermodynamic, structural, and electronic properties of liquid SiO$_2$ characterize the bonded-to-atomic transition at 0.1--1.6 TPa and 10$^4$--10$^5$ K (1--7 eV), the high-energy-density regime relevant to understanding planetary interiors. We find strong ionic bonds that become short-lived due to high kinetics during the transition, with sensitiv…
▽ More
First-principles calculations and analysis of the thermodynamic, structural, and electronic properties of liquid SiO$_2$ characterize the bonded-to-atomic transition at 0.1--1.6 TPa and 10$^4$--10$^5$ K (1--7 eV), the high-energy-density regime relevant to understanding planetary interiors. We find strong ionic bonds that become short-lived due to high kinetics during the transition, with sensitivity of the transition temperature to pressure, and our calculated Hugoniots agree with past experimental data. These results reconcile previous experimental and theoretical findings by clarifying the nature of the bond dissociation process in early Earth and "rocky" (oxide) constituents of large planets.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Nafion-induced reduction of manganese and its impact on the electrocatalytic properties of a highly active MnFeNi oxide for bifunctional oxygen conversion
Authors:
Dulce M. Morales,
Javier Villalobos,
Mariya A. Kazakova,
Jie Xiao,
Marcel Risch
Abstract:
Electrocatalysts for bifunctional oxygen reduction (ORR) and oxygen evolution reaction (OER) are commonly studied under hydrodynamic conditions, rendering the use of binders necessary to ensure the mechanical stability of the electrode films. The presence of a binder, however, may influence the properties of the materials under examination to an unknown extent. Herein, we investigate the impact of…
▽ More
Electrocatalysts for bifunctional oxygen reduction (ORR) and oxygen evolution reaction (OER) are commonly studied under hydrodynamic conditions, rendering the use of binders necessary to ensure the mechanical stability of the electrode films. The presence of a binder, however, may influence the properties of the materials under examination to an unknown extent. Herein, we investigate the impact of Nafion on a highly active ORR/OER catalyst consisting of MnFeNi oxide nanoparticles supported on multi-walled carbon nanotubes. Electrochemical studies revealed that, in addition to enhancing the mechanical stability and particle connectivity, Nafion poses a major impact on the ORR selectivity, which correlates with a decrease in the valence state of Mn according to X-ray absorption spectroscopy. These findings call for awareness regarding the use of electrode additives, since in some cases the extent of their impact on the properties of electrode films cannot be regarded as negligible.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
Spectral Functions from Auxiliary-Field Quantum Monte Carlo without Analytic Continuation: The Extended Koopmans' Theorem Approach
Authors:
Joonho Lee,
Fionn D. Malone,
Miguel A. Morales,
David R. Reichman
Abstract:
We explore the extended Koopmans' theorem (EKT) within the phaseless auxiliary-field quantum Monte Carlo (AFQMC) method. The EKT allows for the direct calculation of electron addition and removal spectral functions using reduced density matrices of the $N$-particle system, and avoids the need for analytic continuation. The lowest level of EKT with AFQMC, called EKT1-AFQMC, is benchmarked using sma…
▽ More
We explore the extended Koopmans' theorem (EKT) within the phaseless auxiliary-field quantum Monte Carlo (AFQMC) method. The EKT allows for the direct calculation of electron addition and removal spectral functions using reduced density matrices of the $N$-particle system, and avoids the need for analytic continuation. The lowest level of EKT with AFQMC, called EKT1-AFQMC, is benchmarked using small molecules, 14-electron and 54-electron uniform electron gas supercells, and diamond at the $Γ$-point. Via comparison with numerically exact results (when possible) and coupled-cluster methods, we find that EKT1-AFQMC can reproduce the qualitative features of spectral functions for Koopmans-like charge excitations with errors in peak locations of less than 0.25 eV in a finite basis. We also note the numerical difficulties that arise in the EKT1-AFQMC eigenvalue problem, especially when back-propagated quantities are very noisy. We show how a systematic higher order EKT approach can correct errors in EKT1-based theories with respect to the satellite region of the spectral function. Our work will be of use for the study of low-energy charge excitations and spectral functions in correlated molecules and solids where AFQMC can be reliably performed.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
Acoustofluidic phase microscopy in a tilted segmentation-free configuration
Authors:
Julián Mejía Morales,
Björn Hammarström,
Gian Luca Lippi,
Massimo Vassalli,
Peter Glynne-Jones
Abstract:
A low-cost device for registration-free quantitative phase microscopy (QPM) based on the transport of intensity equation (TIE) of cells in continuous flow is presented. The method uses acoustic focusing to align cells into a single plane where all cells move at a constant speed. The acoustic focusing plane is tilted with respect to the microscope's focal plane in order to obtain cell images at mul…
▽ More
A low-cost device for registration-free quantitative phase microscopy (QPM) based on the transport of intensity equation (TIE) of cells in continuous flow is presented. The method uses acoustic focusing to align cells into a single plane where all cells move at a constant speed. The acoustic focusing plane is tilted with respect to the microscope's focal plane in order to obtain cell images at multiple focal positions. As the cells are displaced at constant speed, phase maps can be generated without the need to segment and register individual objects. The proposed inclined geometry allows for the acquisition of a vertical stack without the need for any moving part, and it enables a cost-effective and robust implementation of QPM. The suitability of the solution for biological imaging is tested on blood samples, demonstrating the ability to recover the phase map of single red blood cells flowing through the microchip.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
A Phaseless Auxiliary-Field Quantum Monte Carlo Perspective on the Uniform Electron Gas at Finite Temperatures: Issues, Observations, and Benchmark Study
Authors:
Joonho Lee,
Miguel A. Morales,
Fionn D. Malone
Abstract:
We investigate the viability of the phaseless finite temperature auxiliary field quantum Monte Carlo (ph-FT-AFQMC) method for ab initio systems using the uniform electron gas as a model. Through comparisons with exact results and finite temperature coupled cluster theory, we find that ph-FT-AFQMC is sufficiently accurate at high to intermediate electronic densities. We show both analytically and n…
▽ More
We investigate the viability of the phaseless finite temperature auxiliary field quantum Monte Carlo (ph-FT-AFQMC) method for ab initio systems using the uniform electron gas as a model. Through comparisons with exact results and finite temperature coupled cluster theory, we find that ph-FT-AFQMC is sufficiently accurate at high to intermediate electronic densities. We show both analytically and numerically that the phaseless constraint at finite temperature is fundamentally different from its zero temperature counterpart (i.e., ph-ZT-AFQMC) and generally one should not expect ph-FT-AFQMC to agree with ph-ZT-AFQMC in the low temperature limit. With an efficient implementation, we are able to compare exchange-correlation energies to existing results in the thermodynamic limit and find that existing parameterizations are highly accurate. In particular, we found that ph-FT-AFQMC exchange-correlation energies are in a better agreement with a known parametrization than is restricted path-integral Monte Carlo in the regime of $Θ\le0.5$ and $r_s \le 2$, which highlights the strength of ph-FT-AFQMC.
△ Less
Submitted 11 February, 2021; v1 submitted 22 December, 2020;
originally announced December 2020.
-
Spectroscopic analysis of the argon scintillation with a wavelength sensitive particle detector
Authors:
R. Santorelli,
E. Sanchez Garcia,
P. Garcia Abia,
D. González-Díaz,
R. Lopez Manzano,
J. J. Martinez Morales,
V. Pesudo,
L. Romero
Abstract:
We performed a time-resolved spectroscopic study of the VUV/UV argon scintillation as a function of pressure and electric field, by means of a wavelength sensitive detector operated with different radioactive sources. Our work conveys new evidence of distinctive features of the argon light which are in contrast with the general assumption that, for particle detection purposes, the scintillation ca…
▽ More
We performed a time-resolved spectroscopic study of the VUV/UV argon scintillation as a function of pressure and electric field, by means of a wavelength sensitive detector operated with different radioactive sources. Our work conveys new evidence of distinctive features of the argon light which are in contrast with the general assumption that, for particle detection purposes, the scintillation can be considered to be largely monochromatic at 128 nm (second continuum). The wavelength and the time-resolved analysis of the photon emission reveal that the dominant component of the argon scintillation during first tens of ns is in the range [160, 325] nm. This light is consistent with the third continuum emission from highly charged argon ions/molecules. This component of the scintillation is field-independent up to 25 V/cm/bar and shows a very mild dependence with pressure in the range [1,16] bar. The dynamics of the second continuum emission is dominated by the excimer formation time, whose variation as a function of the pressure has been measured. Additionally, the time and pressure-dependent features of electron-ion recombination, in the second continuum band, have been measured. This study opens new paths toward a novel particle identification technique based on the spectral information of the noble-elements scintillation light.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Seven steps to reliable cyclic voltammetry measurements for the determination of double layer capacitance
Authors:
Dulce M. Morales,
Marcel Risch
Abstract:
Discovery of electrocatalytic materials for high-performance energy conversion and storage applications relies on the adequate characterization of their intrinsic activity, which is currently hindered by the dearth of a protocol for consistent and precise determination of double layer capacitance (CDL). Herein, we propose a seven-step method that aims to determine CDL reliably by scan rate-depende…
▽ More
Discovery of electrocatalytic materials for high-performance energy conversion and storage applications relies on the adequate characterization of their intrinsic activity, which is currently hindered by the dearth of a protocol for consistent and precise determination of double layer capacitance (CDL). Herein, we propose a seven-step method that aims to determine CDL reliably by scan rate-dependent cyclic voltammetry. The method considers three aspects that strongly influence the outcome of the analysis: measurement settings, data collection, and data processing. To illustrate the proposed method, two systems were studied: a resistor-capacitor electric circuit and a glassy carbon disk in an electrochemical cell. With these studies it is demonstrated that when any of the mentioned aspects of the procedure are neglected, substantial deviations of the results are observed with misestimations as large as 61% in the case of the investigated electrochemical system. Moreover, we propose allometric regression as a more suitable model than linear regression for the determination of CDL for both the ideal and the non-ideal systems investigated. We stress the importance of assessing the accuracy of not only highly specialized electrochemical methods, but also of those that are well-known and commonly used as it is the case of the voltammetric methods. The methodology proposed herein is not limited to the determination of CDL, but can be effectively applied to any other voltammetry-based analysis that aims to deliver quantitative results.
△ Less
Submitted 3 March, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Deep learning for gravitational-wave data analysis: A resampling white-box approach
Authors:
Manuel D. Morales,
Javier M. Antelis,
Claudia Moreno,
Alexander I. Nesterov
Abstract:
In this work, we apply Convolutional Neural Networks (CNNs) to detect gravitational wave (GW) signals of compact binary coalescences, using single-interferometer data from LIGO detectors. As novel contribution, we adopted a resampling white-box approach to advance towards a statistical understanding of uncertainties intrinsic to CNNs in GW data analysis. Resampling is performed by repeated $k$-fol…
▽ More
In this work, we apply Convolutional Neural Networks (CNNs) to detect gravitational wave (GW) signals of compact binary coalescences, using single-interferometer data from LIGO detectors. As novel contribution, we adopted a resampling white-box approach to advance towards a statistical understanding of uncertainties intrinsic to CNNs in GW data analysis. Resampling is performed by repeated $k$-fold cross-validation experiments, and for a white-box approach, behavior of CNNs is mathematically described in detail. Through a Morlet wavelet transform, strain time series are converted to time-frequency images, which in turn are reduced before generating input datasets. Moreover, to reproduce more realistic experimental conditions, we worked only with data of non-Gaussian noise and hardware injections, removing freedom to set signal-to-noise ratio (SNR) values in GW templates by hand. After hyperparameter adjustments, we found that resampling smooths stochasticity of mini-batch stochastic gradient descend by reducing mean accuracy perturbations in a factor of $3.6$. CNNs were quite precise to detect noise but not sensitive enough to recall GW signals, meaning that CNNs are better for noise reduction than generation of GW triggers. However, applying a post-analysis, we found that for GW signals of SNR $\geq 21.80$ with H1 data and SNR $\geq 26.80$ with L1 data, CNNs could remain as tentative alternatives for detecting GW signals. Besides, with receiving operating characteristic curves we found that CNNs show much better performances than those of Naive Bayes and Support Vector Machines models and, with a significance level of $5\%$, we estimated that predictions of CNNs are significant different from those of a random classifier. Finally, we elucidated that performance of CNNs is highly class dependent because of the distribution of probabilistic scores outputted by the softmax layer.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Accelerating the Convergence of Auxiliary-Field Quantum Monte Carlo inSolids with Optimized Gaussian Basis Sets
Authors:
Miguel A. Morales,
Fionn D. Malone
Abstract:
We investigate the use of optimized correlation consistent gaussian basis sets for the study of insulating solids with auxiliary-field quantum Monte Carlo (AFQMC). The exponents of the basis set are optimized through the minimization of the second order Møller--Plesset perturbation theory (MP2) energy in a small unit cell of the solid. We compare against other alternative basis sets proposed in th…
▽ More
We investigate the use of optimized correlation consistent gaussian basis sets for the study of insulating solids with auxiliary-field quantum Monte Carlo (AFQMC). The exponents of the basis set are optimized through the minimization of the second order Møller--Plesset perturbation theory (MP2) energy in a small unit cell of the solid. We compare against other alternative basis sets proposed in the literature, namely calculations in the Kohn--Sham basis and in the natural orbitals of an MP2 calculation. We find that our optimized basis sets accelerate the convergence of the AFQMC correlation energy compared to a Kohn--Sham basis, and offer similar convergence to MP2 natural orbitals at a fraction of the cost needed to generate them. We also suggest the use of an improved, method independent, MP2-based basis set correction that significantly reduces the required basis set sizes needed to converge the correlation energy. With these developments, we study the relative performance of these basis sets in LiH, Si and MgO, and determine that our optimized basis sets yield the most consistent results as a function of volume. Using these optimized basis sets, we systematically converge the AFQMC calculations to the complete basis set and thermodynamic limit and find excellent agreement with experiment for systems studied. Although we focus on AFQMC, our basis set generation procedure is independent of the subsequent correlated wavefunction method used.
△ Less
Submitted 18 August, 2020; v1 submitted 14 August, 2020;
originally announced August 2020.
-
Systematic Comparison and Cross-validation of Fixed-Node Diffusion Monte Carlo and Phaseless Auxiliary-Field Quantum Monte Carlo in Solids
Authors:
Fionn D. Malone,
Anouar Benali,
Miguel A. Morales,
Michel Caffarel,
P. R. C. Kent,
Luke Shulenburger
Abstract:
Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multi-determinant trial wave functions employed in both approaches are generated using the configuration interact…
▽ More
Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multi-determinant trial wave functions employed in both approaches are generated using the configuration interaction using a perturbative selection made iteratively (CIPSI) technique. Complete basis set full configuration interaction (CBS-FCI) energies estimated with CIPSI are used as a reference in this comparative study between DMC and AFQMC. By focusing on a set of canonical finite size solid state systems, we show that both QMC methods can be made to systematically converge towards the same energy once basis set effects and systematic biases have been removed. AFQMC shows a much smaller dependence on the trial wavefunction than DMC while simultaneously exhibiting a much larger basis set dependence. We outline some of the remaining challenges and opportunities for improving these approaches.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Accelerating Auxiliary-Field Quantum Monte Carlo Simulations of Solids with Graphical Processing Unit
Authors:
Fionn D. Malone,
Shuai Zhang,
Miguel A. Morales
Abstract:
We outline how auxiliary-field quantum Monte Carlo (AFQMC) can leverage graphical processing units (GPUs) to accelerate the simulation of solid state sytems. By exploiting conservation of crystal momentum in the one- and two-electron integrals we show how to efficiently formulate the algorithm to best utilize current GPU architectures. We provide a detailed description of different optimization st…
▽ More
We outline how auxiliary-field quantum Monte Carlo (AFQMC) can leverage graphical processing units (GPUs) to accelerate the simulation of solid state sytems. By exploiting conservation of crystal momentum in the one- and two-electron integrals we show how to efficiently formulate the algorithm to best utilize current GPU architectures. We provide a detailed description of different optimization strategies and profile our implementation relative to standard approaches, demonstrating a factor of 40 speed up over a CPU implementation. With this increase in computational power we demonstrate the ability of AFQMC to systematically converge solid state calculations with respect to basis set and system size by computing the cohesive energy of Carbon in the diamond structure to within 0.02 eV of the experimental result.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
Modeling Lead-Rubber Seismic Isolation Bearings Using the Unified Mechanics Theory
Authors:
Hernan Martin Hernandez Morales
Abstract:
Lead-rubber seismic isolation bearings (LRB) have been installed in a number of essential and critical structures, like hospitals, universities and bridges, located in earthquake-prone areas. The purpose of using LRB is providing the structure with period lengthening and the capacity of dissipating a considerable amount of earthquake energy to mitigate the effects of strong ground motions. Therefo…
▽ More
Lead-rubber seismic isolation bearings (LRB) have been installed in a number of essential and critical structures, like hospitals, universities and bridges, located in earthquake-prone areas. The purpose of using LRB is providing the structure with period lengthening and the capacity of dissipating a considerable amount of earthquake energy to mitigate the effects of strong ground motions. Therefore, studying the damage mechanics of this kind of devices is fundamental to understand and accurately describe their thermomechanical behavior, so that seismically isolated structures can be designed more safely.
Traditionally, up to this point, the hysteretic behavior of LBR has been modeled using 1) Newtonian mechanics and empirical curve fitting degradation functions, or 2) heat conduction theories and idealized bilinear curves which include degradation effects. The reason for using models that are essentially phenomenological or that contain some adjusted parameters is the fact that universal laws of motion by Newton lack the term to account for degradation and energy loss of a system. In this paper, the Unified Mechanics Theory, which integrates laws of Thermodynamics and Newtonian mechanics at ab-initio level, is used to model the force-displacement response of LRB. When Unified Mechanics Theory is used, there is no need for curve fitting techniques to describe the degradation behavior of the material. Damage or degradation at every point is calculated using entropy generation and the physics based fundamental equations of the material along the Thermodynamics State Index (TSI) axis.
A finite element model of a lead-rubber bearing was constructed in ABAQUS, where a user material subroutine UMAT was implemented to define the Unified Mechanics Theory equations and the viscoplastic constitutive model for lead. Finite element analysis results were compared with experimental test data.
△ Less
Submitted 27 March, 2021; v1 submitted 12 March, 2020;
originally announced March 2020.
-
QMCPACK: Advances in the development, efficiency, and application of auxiliary field and real-space variational and diffusion Quantum Monte Carlo
Authors:
P. R. C. Kent,
Abdulgani Annaberdiyev,
Anouar Benali,
M. Chandler Bennett,
Edgar Josue Landinez Borda,
Peter Doak,
Kenneth D. Jordan,
Jaron T. Krogel,
Ilkka Kylanpaa,
Joonho Lee,
Ye Luo,
Fionn D. Malone,
Cody A. Melton,
Lubos Mitas,
Miguel A. Morales,
Eric Neuscamman,
Fernando A. Reboredo,
Brenda Rubenstein,
Kayahan Saritas,
Shiv Upadhyay,
Hongxia Hao,
Guangming Wang,
Shuai Zhang,
Luning Zhao
Abstract:
We review recent advances in the capabilities of the open source ab initio Quantum Monte Carlo (QMC) package QMCPACK and the workflow tool Nexus used for greater efficiency and reproducibility. The auxiliary field QMC (AFQMC) implementation has been greatly expanded to include k-point symmetries, tensor-hypercontraction, and accelerated graphical processing unit (GPU) support. These scaling and me…
▽ More
We review recent advances in the capabilities of the open source ab initio Quantum Monte Carlo (QMC) package QMCPACK and the workflow tool Nexus used for greater efficiency and reproducibility. The auxiliary field QMC (AFQMC) implementation has been greatly expanded to include k-point symmetries, tensor-hypercontraction, and accelerated graphical processing unit (GPU) support. These scaling and memory reductions greatly increase the number of orbitals that can practically be included in AFQMC calculations, increasing accuracy. Advances in real space methods include techniques for accurate computation of band gaps and for systematically improving the nodal surface of ground state wavefunctions. Results of these calculations can be used to validate application of more approximate electronic structure methods including GW and density functional based techniques. To provide an improved foundation for these calculations we utilize a new set of correlation-consistent effective core potentials (pseudopotentials) that are more accurate than previous sets; these can also be applied in quantum-chemical and other many-body applications, not only QMC. These advances increase the efficiency, accuracy, and range of properties that can be studied in both molecules and materials with QMC and QMCPACK.
△ Less
Submitted 6 May, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
First-principles Equations of State and Structures of Liquid Metals in Multi-megabar Conditions
Authors:
Shuai Zhang,
Miguel A. Morales
Abstract:
Liquid metals at extreme pressures and temperatures are widely interested in the high-pressure community. Based on density functional theory molecular dynamics, we conduct first-principles investigations on the equation of state (EOS) and structures of four metals (Cu, Fe, Pb, and Sn) at 1.5--5 megabar conditions and 5$\times10^3$--4$\times10^4$ K. Our first-principles EOS data enable evaluating t…
▽ More
Liquid metals at extreme pressures and temperatures are widely interested in the high-pressure community. Based on density functional theory molecular dynamics, we conduct first-principles investigations on the equation of state (EOS) and structures of four metals (Cu, Fe, Pb, and Sn) at 1.5--5 megabar conditions and 5$\times10^3$--4$\times10^4$ K. Our first-principles EOS data enable evaluating the performance of four EOS models in predicting Hugoniot densities and temperatures of the four systems. We find the melting temperature of Cu is 1000--2000 K higher and shows a similar Clapeyron slope, in comparison to those of Fe. Our structure, coordination number, and diffusivity analysis indicates all the four liquid metals form similar simple close-packed structures. Our results set theoretical benchmarks for EOS development and structures of metals in their liquid states and under dynamic compression.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Design and construction of a new detector to measure ultra-low radioactive-isotope contamination of argon
Authors:
The DarkSide Collaboration,
C. E. Aalseth,
S. Abdelhakim,
F. Acerbi,
P. Agnes,
R. Ajaj,
I. F. M. Albuquerque,
T. Alexander,
A. Alici,
A. K. Alton,
P. Amaudruz,
F. Ameli,
J. Anstey,
P. Antonioli,
M. Arba,
S. Arcelli,
R. Ardito,
I. J. Arnquist,
P. Arpaia,
D. M. Asner,
A. Asunskis,
M. Ave,
H. O. Back,
A. Barrado Olmedo,
G. Batignani
, et al. (306 additional authors not shown)
Abstract:
Large liquid argon detectors offer one of the best avenues for the detection of galactic weakly interacting massive particles (WIMPs) via their scattering on atomic nuclei. The liquid argon target allows exquisite discrimination between nuclear and electron recoil signals via pulse-shape discrimination of the scintillation signals. Atmospheric argon (AAr), however, has a naturally occurring radioa…
▽ More
Large liquid argon detectors offer one of the best avenues for the detection of galactic weakly interacting massive particles (WIMPs) via their scattering on atomic nuclei. The liquid argon target allows exquisite discrimination between nuclear and electron recoil signals via pulse-shape discrimination of the scintillation signals. Atmospheric argon (AAr), however, has a naturally occurring radioactive isotope, $^{39}$Ar, a $β$ emitter of cosmogenic origin. For large detectors, the atmospheric $^{39}$Ar activity poses pile-up concerns. The use of argon extracted from underground wells, deprived of $^{39}$Ar, is key to the physics potential of these experiments. The DarkSide-20k dark matter search experiment will operate a dual-phase time projection chamber with 50 tonnes of radio-pure underground argon (UAr), that was shown to be depleted of $^{39}$Ar with respect to AAr by a factor larger than 1400. Assessing the $^{39}$Ar content of the UAr during extraction is crucial for the success of DarkSide-20k, as well as for future experiments of the Global Argon Dark Matter Collaboration (GADMC). This will be carried out by the DArT in ArDM experiment, a small chamber made with extremely radio-pure materials that will be placed at the centre of the ArDM detector, in the Canfranc Underground Laboratory (LSC) in Spain. The ArDM LAr volume acts as an active veto for background radioactivity, mostly $γ$-rays from the ArDM detector materials and the surrounding rock. This article describes the DArT in ArDM project, including the chamber design and construction, and reviews the background required to achieve the expected performance of the detector.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Utilizing Essential Symmetry Breaking in Auxiliary-Field Quantum Monte Carlo: Application to the Spin Gaps of the C$_{36}$ Fullerene and an Iron Porphyrin Model Complex
Authors:
Joonho Lee,
Fionn D. Malone,
Miguel A. Morales
Abstract:
We present three distinct examples where phaseless auxiliary-field Quantum Monte Carlo (ph-AFQMC) can be reliably performed with a single-determinant trial wavefunction with essential symmetry breaking. We first utilized essential time-reversal symmetry breaking with ph-AFQMC to compute the triplet-singlet energy gap in the TS12 set. We found statistically better performance of ph-AFQMC with compl…
▽ More
We present three distinct examples where phaseless auxiliary-field Quantum Monte Carlo (ph-AFQMC) can be reliably performed with a single-determinant trial wavefunction with essential symmetry breaking. We first utilized essential time-reversal symmetry breaking with ph-AFQMC to compute the triplet-singlet energy gap in the TS12 set. We found statistically better performance of ph-AFQMC with complex-restricted orbitals than with spin-unrestricted orbitals. We then showed the utilization of essential spin symmetry breaking when computing the single-triplet gap of a known biradicaloid, C$_{36}$. ph-AFQMC with spin-unrestricted Hartree-Fock (ph-AFQMC+UHF) fails catastrophically even with spin-projection and predicts no biradicaloid character. With approximate Brueckner orbitals obtained from regularized orbital-optimized second-order Møller-Plesset perturbation theory ($κ$-OOMP2), ph-AFQMC quantitatively captures strong biradicaloid character of C$_{36}$. Lastly, we applied ph-AFQMC to the computation of the quintet-triplet gap in a model iron porphyrin complex where brute-force methods with a small active space fail to capture the triplet ground state. We show unambiguously that neither triplet nor quintet is strongly correlated using UHF, $κ$-OOMP2, and coupled-cluster with singles and doubles (CCSD) performed on UHF and $κ$-OOMP2 orbitals. There is no essential symmetry breaking in this problem. By virtue of this, we were able to perform UHF+ph-AFQMC reliably with a cc-pVTZ basis set and predicted a triplet ground state for this model geometry. The largest ph-AFQMC in this work correlated 186 electrons in 956 orbitals. Our work highlights the utility, scalability, and accuracy of ph-AFQMC with a single determinant trial wavefunction with essential symmetry breaking for systems mainly dominated by dynamical correlation with little static correlation.
△ Less
Submitted 16 April, 2020; v1 submitted 14 January, 2020;
originally announced January 2020.
-
Technical Design Report for the PANDA Endcap Disc DIRC
Authors:
Panda Collaboration,
F. Davi,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
F. Feldbauer,
M. Fink,
V. Freudenreich,
M. Fritsch,
F. H. Heinsius,
T. Held,
T. Holtmann,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann
, et al. (441 additional authors not shown)
Abstract:
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c.…
▽ More
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.
-
Optical and nanostructural insights of oblique angle deposited layers applied for photononic coatings
Authors:
Florian Maudet,
Bertrand Lacroix,
Antonio J. Santos,
Fabien Paumier,
Maxime Paraillous,
Simon Hurand,
Alan Corvisier,
Cecile Marsal,
Baptiste Giroire,
Cyril Dupeyrat,
Rafael García,
Francisco M. Morales,
Thierry Girardeau
Abstract:
Oblique angle deposition (OAD) is a nanostructuration method widely used to tune the optical properties of thin films. The introduction of porosity controlled by the deposition angle is used to develop the architecture of each layer and stack that enable modifying and optimizing the optical properties of the constituent layers for optimal design. However, optical properties of these nanostructured…
▽ More
Oblique angle deposition (OAD) is a nanostructuration method widely used to tune the optical properties of thin films. The introduction of porosity controlled by the deposition angle is used to develop the architecture of each layer and stack that enable modifying and optimizing the optical properties of the constituent layers for optimal design. However, optical properties of these nanostructured layers may differ greatly from those of dense layers due to the presence of anisotropy, refractive index gradient and scattering. This work focuses on OAD layers based on a reference photonic material such as SiO2 and it aims at taking into account all these effects in the description of the optical response. For that, the nanostructure has been analyzed with a complete SEM study and key parameters like the porosity gradient profile and aspect ratio of the nanocolumns were extracted. The samples were then characterized by generalized ellipsometry to evaluate the influence of morphological anisotropy and porosity gradient on the optical response of the films. Based on this microstructural study, an original optical model is presented to fit the features of new optical properties. A reliable correspondence is observed between the optical model parameters and the microstructure characteristics like the column angle and the porosity gradient. This demonstrates that such complex microstructural parameters can be easily accessed solely from optical measurements. All the work has enabled us to develop a two-layer anti-reflective coating that already demonstrate high level of transmission.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
J. M. Barcala,
L. Barcellan,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
L. C. Blanco Ramos,
A. Boletti,
A. Bragagnolo,
J. A. Brochero Cifuentes,
V. Cafaro,
A. Calderon,
E. Calvo,
A. Cappati,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo
, et al. (118 additional authors not shown)
Abstract:
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad…
▽ More
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
First results of Resistive-Plate Well (RPWELL) detector operation at 163 K
Authors:
A. Roy,
M. Morales,
I. Israelashvili,
A. Breskin,
S. Bressler,
D. Gonzalez-Diaz,
C. Pecharromán,
S. Shchemelinin,
D. Vartsky,
L. Arazi
Abstract:
We present for the first time, discharge-free operation at cryogenic conditions of a Resistive-Plate WELL (RPWELL) detector. It is a single-sided Thick Gaseous Electron Multiplier (THGEM) coupled to a readout anode via a plate of high bulk resistivity. The results of single- and double-stage RPWELL detectors operated in stable conditions in Ne/5$\%$CH$_{4}$ at 163 K are summarized. The RPWELL comp…
▽ More
We present for the first time, discharge-free operation at cryogenic conditions of a Resistive-Plate WELL (RPWELL) detector. It is a single-sided Thick Gaseous Electron Multiplier (THGEM) coupled to a readout anode via a plate of high bulk resistivity. The results of single- and double-stage RPWELL detectors operated in stable conditions in Ne/5$\%$CH$_{4}$ at 163 K are summarized. The RPWELL comprised a ferric-based (Fe$^{3+}$) ceramic composite ("Fe-ceramic") as the resistive plate, of volume resistivity $\sim$$10^{11}$ $Ω$$\cdot$cm at this temperature. Gains of $\sim$$10^{4}$ and $\sim$$10^{5}$ were reached with the single-stage RPWELL, with 6 keV X-rays and single UV-photons, respectively. The double-stage detector, a THGEM followed by the RPWELL, reached gains $\sim$$10^{5}$ and $\sim$$10^{6}$ with X-rays and single UV-photons, respectively. The results were obtained with and without a CsI photocathode on the first multiplying element. Potential applications at these cryogenic conditions are discussed.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
On the importance of light scattering for high performances nanostructured antireflective surfaces
Authors:
Florian Maudet,
Bertrand Lacroix,
Antonio J. Santos,
Fabien Paumier,
Maxime Paraillous,
Simon Hurand,
Alan Corvisier,
Cyril Dupeyrat,
Rafael García,
Francisco M. Morales,
Thierry Girardeau
Abstract:
An antireflective coating presenting a continuous refractive index gradient is theoretically better than its discrete counterpart because it can give rise to a perfect broadband transparency. This kind of surface treatment can be obtained with nanostructures like moth-eye. Despite the light scattering behavior must be accounted as it can lead to a significant transmittance drop, no methods are act…
▽ More
An antireflective coating presenting a continuous refractive index gradient is theoretically better than its discrete counterpart because it can give rise to a perfect broadband transparency. This kind of surface treatment can be obtained with nanostructures like moth-eye. Despite the light scattering behavior must be accounted as it can lead to a significant transmittance drop, no methods are actually available to anticipate scattering losses in such nanostructured antireflective coatings. To overcome this current limitation, we present here an original way to simulate the scattering losses in these systems and routes to optimize the transparency. This method, which was validated by a comparative study of coatings presenting refractive indices with either discrete or continuous gradient, shows that a discrete antireflective coating bilayer made by oblique angle deposition allows reaching ultra-high mean transmittance of 98.97% over the broadband [400-1800] nm. Such simple surface treatment outperforms moth-eye architectures thanks to both interference effect and small dimensions nanostructures that minimize the scattering losses as confirmed by finite-difference time domain simulations performed on reconstructed volumes obtained from electron tomography experiments.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
An Auxiliary-Field Quantum Monte Carlo Perspective on the Ground State of the Dense Uniform Electron Gas: An Investigation with Hartree-Fock Trial Wavefunctions
Authors:
Joonho Lee,
Fionn D. Malone,
Miguel A. Morales
Abstract:
We assess the utility of Hartree-Fock (HF) trial wavefunctions in performing phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) on the uniform electron gas (UEG) model. The combination of ph-AFQMC with spin-restricted HF (RHF+ph-AFQMC), was found to be highly accurate and efficient for systems containing up to 114 electrons in 2109 orbitals, particularly for $r_s$ $\le$ 2.0. Compared to spin…
▽ More
We assess the utility of Hartree-Fock (HF) trial wavefunctions in performing phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) on the uniform electron gas (UEG) model. The combination of ph-AFQMC with spin-restricted HF (RHF+ph-AFQMC), was found to be highly accurate and efficient for systems containing up to 114 electrons in 2109 orbitals, particularly for $r_s$ $\le$ 2.0. Compared to spin-restricted coupled-cluster (RCC) methods, we found that RHF+ph-AFQMC performs better than CC with singles, doubles, and triples (RCCSDT) and similarly to or slightly worse than CC with singles, doubles, triples, and quadruples (RCCSDTQ) for $r_s$ $\le$ 3.0 in the 14-electron UEG model. With the 54-electron, we found RHF+ph-AFQMC to be nearly exact for $r_s$ $\le$ 2.0 and pointed out potential biases in existing benchmarks. Encouraged by these, we performed RHF+ph-AFQMC on the 114-electron UEG model for $r_s$ $\le$ 2.0 and provided new benchmark data for future method development. We found that the UEG models with $r_s$ = 5.0 remain to be challenging for RHF+ph-AFQMC. Employing non-orthogonal configuration expansions or unrestricted HF states as trial wavefunctions was also found to be ineffective in the case of the 14-electron UEG model with $r_s$ = 5.0. We emphasize the need for a better trial wavefunction for ph-AFQMC in simulating strongly correlated systems. With the 54-electron and 114-electron UEG models, we stress the potential utility of RHF+ph-AFQMC for simulating dense solids.
△ Less
Submitted 9 July, 2019; v1 submitted 10 May, 2019;
originally announced May 2019.
-
Vacuum electrical breakdown conditioning study in a parallel plate electrode pulsed DC system
Authors:
Anders Korsbäck,
Laura Mercadé Morales,
Iaroslava Profatilova,
Flyura Djurabekova,
Enrique Rodriguez Castro,
Walter Wuensch,
Tommy Ahlgren,
Sergio Calatroni
Abstract:
Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a signi…
▽ More
Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a significant duration of system runtime. Projected future linear accelerators require structures with accelerating gradients of up to 100 MV/m. Currently, this performance level is only achievable after a multi-month conditioning period. In this work, a pulsed DC system applying voltage pulses over parallel disk electrodes was used to study the conditioning process, with the objective of obtaining insight into its underlying mechanics, and ultimately, to find ways to shorten the conditioning process. Two kinds of copper electrodes were tested: As-prepared machine-turned electrodes ("hard" copper), and electrodes that additionally had been subjected to high temperature treatments ("soft" copper). The conditioning behaviour of the soft electrodes was found to be similar to that of comparably treated accelerating structures, indicating a similar conditioning process. The hard electrodes reached the same ultimate performance as the soft electrodes much faster, with a difference of more than an order of magnitude in the number of applied voltage pulses. Two distinctly different distributions of breakdown locations were observed on the two types of electrodes. Considered together, our results support the crystal structure dislocation theory of breakdown, and suggest that the conditioning of copper in high field systems such as rf accelerating structures is dominated by material hardening.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces
Authors:
Rebeca Bueno,
Marzia Marciello,
Miguel Moreno,
Carlos Sanchez-Sanchez,
José I. Martínez,
Lidia Martinez,
Elisabet Prats-Alfonso,
Anton Guimera-Brunet,
Jose A. Garrido,
Rosa Villa,
Federico Mompean,
Mar García-Hernandez,
Yves Huttel,
María del Puerto Morales,
Carlos Briones,
María F. Lopez,
Gary J. Ellis,
Luis Vazquez,
Joseé A. Martín-Gago
Abstract:
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-t…
▽ More
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S-metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multi-technique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Overcoming the Memory Bottleneck in Auxiliary Field Quantum Monte Carlo Simulations with Interpolative Separable Density Fitting
Authors:
Fionn D Malone,
Shuai Zhang,
Miguel A. Morales
Abstract:
We investigate the use of interpolative separable density fitting (ISDF) as a means to reduce the memory bottleneck in auxiliary field quantum Monte Carlo (AFQMC) simulations of real materials in Gaussian basis sets. We find that ISDF can reduce the memory scaling of AFQMC simulations from $\mathcal{O}(M^4)$ to $\mathcal{O}(M^2)$. We test these developments by computing the structural properties o…
▽ More
We investigate the use of interpolative separable density fitting (ISDF) as a means to reduce the memory bottleneck in auxiliary field quantum Monte Carlo (AFQMC) simulations of real materials in Gaussian basis sets. We find that ISDF can reduce the memory scaling of AFQMC simulations from $\mathcal{O}(M^4)$ to $\mathcal{O}(M^2)$. We test these developments by computing the structural properties of Carbon in the diamond phase, comparing to results from existing computational methods and experiment.
△ Less
Submitted 21 December, 2018; v1 submitted 29 September, 2018;
originally announced October 2018.
-
A first-principles global multiphase equation of state for hydrogen
Authors:
Alfredo A. Correa,
Lorin X. Benedict,
Miguel A. Morales,
Philip A. Sterne,
John I. Castor,
Eric Schwegler
Abstract:
We present and discuss a wide-range hydrogen equation of state model based on a consistent set of ab initio simulations including quantum protons and electrons. Both the process of constructing this model and its predictions are discussed in detail. The cornerstones of this work are the specification of simple physically motivated free energy models, a general multiparameter/multiderivative fittin…
▽ More
We present and discuss a wide-range hydrogen equation of state model based on a consistent set of ab initio simulations including quantum protons and electrons. Both the process of constructing this model and its predictions are discussed in detail. The cornerstones of this work are the specification of simple physically motivated free energy models, a general multiparameter/multiderivative fitting method, and the use of the most accurate simulation methods to date. The resulting equation of state aims for a global range of validity ($T = 1-10^9 K$ and $V_m = 10^{-9}-1 m^3/mol$), as the models are specifically constructed to reproduce exact thermodynamic and mechanical limits. Our model is for the most part analytic or semianalytic and is thermodynamically consistent by construction; the problem of interpolating between distinctly different models -often a cause for thermodynamic inconsistencies and spurious discontinuities- is avoided entirely.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Auxiliary-field quantum Monte Carlo calculations of the structural properties of nickel oxide
Authors:
Shuai Zhang,
Fionn D. Malone,
Miguel A. Morales
Abstract:
Auxiliary-field quantum Monte Carlo (AFQMC) has repeatedly demonstrated itself as one of the most accurate quantum many-body methods, capable of simulating both real and model systems. In this article we investigate the application of AFQMC to realistic strongly correlated materials in periodic Gaussian basis sets. Using nickel oxide (NiO) as an example, we investigate the importance of finite siz…
▽ More
Auxiliary-field quantum Monte Carlo (AFQMC) has repeatedly demonstrated itself as one of the most accurate quantum many-body methods, capable of simulating both real and model systems. In this article we investigate the application of AFQMC to realistic strongly correlated materials in periodic Gaussian basis sets. Using nickel oxide (NiO) as an example, we investigate the importance of finite size effects and basis set errors on the structural properties of the correlated solid. We provide benchmark calculations for NiO and compare our results to both experiment measurements and existing theoretical methods. (LLNL-JRNL-752156)
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
Dam** and clustering into crowded environment of catalytic chemical oscillators
Authors:
Carlos Echeverria,
José L. Herrera,
Kay Tucci,
Orlando Alvarez-Llamoza,
Miguel Morales
Abstract:
A system formed by a crowded environment of catalytic obstacles and complex oscillatory chemical reactions is inquired. The obstacles are static spheres of equal radius, which are placed in a random way. The chemical reactions are carried out in a fluid following a multiparticle collision scheme where the mass, energy and local momentum are conserved. Firstly, it is explored how the presence of ca…
▽ More
A system formed by a crowded environment of catalytic obstacles and complex oscillatory chemical reactions is inquired. The obstacles are static spheres of equal radius, which are placed in a random way. The chemical reactions are carried out in a fluid following a multiparticle collision scheme where the mass, energy and local momentum are conserved. Firstly, it is explored how the presence of catalytic obstacles changes the oscillatory dynamics from a limit cycle to a fix point reached after a dam**. The dam** is characterized by the decay constant, which grows linearly with volume fraction for low values of the mesoscale collision time and the catalytic reaction constant. Additionally, it is shown that, although the distribution of obstacles is random, there are regions in the system where the catalytic chemical reactions are favored. This entails that in average the radius of gyrations of catalytic chemical reaction does not match with the radius of gyration of obstacles, that is, clusters of reactions emerge on the catalytic obstacles, even when the diffusion is significant.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
QMCPACK : An open source ab initio Quantum Monte Carlo package for the electronic structure of atoms, molecules, and solids
Authors:
Jeongnim Kim,
Andrew Baczewski,
Todd D. Beaudet,
Anouar Benali,
M. Chandler Bennett,
Mark A. Berrill,
Nick S. Blunt,
Edgar Josue Landinez Borda,
Michele Casula,
David M. Ceperley,
Simone Chiesa,
Bryan K. Clark,
Raymond C. Clay III,
Kris T. Delaney,
Mark Dewing,
Kenneth P. Esler,
Hongxia Hao,
Olle Heinonen,
Paul R. C. Kent,
Jaron T. Krogel,
Ilkka Kylanpaa,
Ying Wai Li,
M. Graham Lopez,
Ye Luo,
Fionn D. Malone
, et al. (23 additional authors not shown)
Abstract:
QMCPACK is an open source quantum Monte Carlo package for ab-initio electronic structure calculations. It supports calculations of metallic and insulating solids, molecules, atoms, and some model Hamiltonians. Implemented real space quantum Monte Carlo algorithms include variational, diffusion, and reptation Monte Carlo. QMCPACK uses Slater-Jastrow type trial wave functions in conjunction with a s…
▽ More
QMCPACK is an open source quantum Monte Carlo package for ab-initio electronic structure calculations. It supports calculations of metallic and insulating solids, molecules, atoms, and some model Hamiltonians. Implemented real space quantum Monte Carlo algorithms include variational, diffusion, and reptation Monte Carlo. QMCPACK uses Slater-Jastrow type trial wave functions in conjunction with a sophisticated optimizer capable of optimizing tens of thousands of parameters. The orbital space auxiliary field quantum Monte Carlo method is also implemented, enabling cross validation between different highly accurate methods. The code is specifically optimized for calculations with large numbers of electrons on the latest high performance computing architectures, including multicore central processing unit (CPU) and graphical processing unit (GPU) systems. We detail the program's capabilities, outline its structure, and give examples of its use in current research calculations. The package is available at http://www.qmcpack.org .
△ Less
Submitted 4 April, 2018; v1 submitted 19 February, 2018;
originally announced February 2018.
-
Non-Orthogonal Multi-Slater Determinant Expansions in Auxiliary Field Quantum Monte Carlo
Authors:
Edgar Josué Landinez Borda,
John A. Gomez,
Miguel A. Morales
Abstract:
The Auxiliary-Field Quantum Monte Carlo (AFQMC) algorithm is a powerful quantum many-body method that can be used successfully as an alternative to standard quantum chemistry approaches to compute the ground state of many body systems, such as molecules and solids, with high accuracy. In this article we use AFQMC with trial wave-functions built from non-orthogonal multi Slater determinant expansio…
▽ More
The Auxiliary-Field Quantum Monte Carlo (AFQMC) algorithm is a powerful quantum many-body method that can be used successfully as an alternative to standard quantum chemistry approaches to compute the ground state of many body systems, such as molecules and solids, with high accuracy. In this article we use AFQMC with trial wave-functions built from non-orthogonal multi Slater determinant expansions to study the energetics of molecular systems, including the 55 molecules of the G1 test set and the isomerization path of the $[Cu_{2}O_{2}]^{2+}$ molecule. The main goal of this study is to show the ability of non-orthogonal multi Slater determinant expansions to produce high-quality, compact trial wave-functions for quantum Monte Carlo methods. We obtain systematically improvable results as the number of determinants is increased, with high accuracy typically obtained with tens of determinants. Great reduction in the average error and traditional statistical indicators are observed in the total and absorption energies of the molecules in the G1 test set with as few as 10-20 determinants. In the case of the relative energies along the isomerization path of the $[Cu_{2}O_{2}]^{2+}$, our results compare favorably with other advanced quantum many-body methods, including DMRG and complete-renormalized CCSD(T). Discrepancies in previous studies for this molecular problem are identified and attributed to the differences in the number of electrons and active spaces considered in such calculations.
△ Less
Submitted 19 July, 2018; v1 submitted 31 January, 2018;
originally announced January 2018.