-
First high peak and average power single-pass THz FEL based on high brightness photoinjector
Authors:
M. Krasilnikov,
Z. Aboulbanine,
G. Adhikari,
N. Aftab,
A. Asoyan,
P. Boonpornprasert,
H. Davtyan,
G. Georgiev,
J. Good,
A. Grebinyk,
M. Gross,
A. Hoffmann,
E. Kongmon,
X. -K. Li,
A. Lueangaramwong,
D. Melkumyan,
S. Mohanty,
R. Niemczyk,
A. Oppelt,
H. Qian,
C. Richard,
F. Stephan,
G. Vashchenko,
T. Weilbach,
X. Zhang
, et al. (9 additional authors not shown)
Abstract:
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central waveleng…
▽ More
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Using quantum annealing to design lattice proteins
Authors:
Anders Irbäck,
Lucas Knuthson,
Sandipan Mohanty,
Carsten Peterson
Abstract:
Quantum annealing has shown promise for finding solutions to difficult optimization problems, including protein folding. Recently, we used the D-Wave Advantage quantum annealer to explore the folding problem in a coarse-grained lattice model, the HP model, in which amino acids are classified into two broad groups: hydrophobic (H) and polar (P). Using a set of 22 HP sequences with up to 64 amino ac…
▽ More
Quantum annealing has shown promise for finding solutions to difficult optimization problems, including protein folding. Recently, we used the D-Wave Advantage quantum annealer to explore the folding problem in a coarse-grained lattice model, the HP model, in which amino acids are classified into two broad groups: hydrophobic (H) and polar (P). Using a set of 22 HP sequences with up to 64 amino acids, we demonstrated the fast and consistent identification of the correct HP model ground states using the D-Wave hybrid quantum-classical solver. An equally relevant biophysical challenge, called the protein design problem, is the inverse of the above, where the task is to predict protein sequences that fold to a given structure. Here, we approach the design problem by a two-step procedure, implemented and executed on a D-Wave machine. In the first step, we perform a pure sequence-space search by varying the type of amino acid at each sequence position, and seek sequences which minimize the HP-model energy of the target structure. After map** this task onto an Ising spin glass representation, we employ a hybrid quantum-classical solver to deliver energy-optimal sequences for structures with 30-64 amino acids, with a 100% success rate. In the second step, we filter the optimized sequences from the first step according to their ability to fold to the intended structure. In addition, we try solving the sequence optimization problem using only the QPU, which confines us to sizes $\le$20, due to exponentially decreasing success rates. To shed light on the pure QPU results, we investigate the effects of control errors caused by an imperfect implementation of the intended Hamiltonian on the QPU, by numerically analyzing the Schrödinger equation. We find that the simulated success rates in the presence of control noise semi-quantitatively reproduce the modest pure QPU results for larger chains.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
iGLU 4.0: A continuous glucose monitoring and balancing paradigm with physiological parameters
Authors:
Prateek Jain,
Amit Joshi,
Saraju Mohanty
Abstract:
The conventional method of glucose measurement such as pricking blood from the body is prevalent which brings pain and trauma. Invasive methods of measurement sometimes raise the risk of blood infection to the patient. Sometimes, some of the physiological parameters such as body temperature and systolic blood pressure (SBP) are responsible for blood glucose level fluctuations. Moreover, diabetes f…
▽ More
The conventional method of glucose measurement such as pricking blood from the body is prevalent which brings pain and trauma. Invasive methods of measurement sometimes raise the risk of blood infection to the patient. Sometimes, some of the physiological parameters such as body temperature and systolic blood pressure (SBP) are responsible for blood glucose level fluctuations. Moreover, diabetes for a long duration usually becomes a critical issue. In such situation, patients need to consult diabetologist frequently, which is not possible in normal life. Therefore, it is required to develop non-invasive glucose balancing paradigm, which measures blood glucose without pricking blood along with physiological parameters measurement and decision model. The proposed paradigm helps to doctor, who is even available at remote location. There will not be any need to consult frequently. In the way of optimized non-invasive system design, an NIRS technique with specific wavelengths along with physiological parameters is taken to predict the precise glucose value. The all parameters (glucose, Blood pressure and body temperature), food intake and insulin levels are parts of decision model, which would help to the doctor to take decision related to the further medicine doses and diet plan. The patients would have suggestions according to maintain their blood glucose level. The proposed system demonstrated an accurate model with MARD and AvgE 12.50% and 12.10% respectively using DNN model. Coefficient of determination R2 has been found 0.97.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Evaluating the Transferability of Machine-Learned Force Fields for Material Property Modeling
Authors:
Shaswat Mohanty,
Sanghyuk Yoo,
Keonwook Kang,
Wei Cai
Abstract:
Machine-learned force fields have generated significant interest in recent years as a tool for molecular dynamics (MD) simulations, with the aim of develo** accurate and efficient models that can replace classical interatomic potentials. However, before these models can be confidently applied to materials simulations, they must be thoroughly tested and validated. The existing tests on the radial…
▽ More
Machine-learned force fields have generated significant interest in recent years as a tool for molecular dynamics (MD) simulations, with the aim of develo** accurate and efficient models that can replace classical interatomic potentials. However, before these models can be confidently applied to materials simulations, they must be thoroughly tested and validated. The existing tests on the radial distribution function and mean-squared displacements are insufficient in assessing the transferability of these models. Here we present a more comprehensive set of benchmarking tests for evaluating the transferability of machine-learned force fields. We use a graph neural network (GNN)-based force field coupled with the OpenMM package to carry out MD simulations for Argon as a test case. Our tests include computational X-ray photon correlation spectroscopy (XPCS) signals, which capture the density fluctuation at various length scales in the liquid phase, as well as phonon density-of-state in the solid phase and the liquid-solid phase transition behavior. Our results show that the model can accurately capture the behavior of the solid phase only when the configurations from the solid phase are included in the training dataset. This underscores the importance of appropriately selecting the training data set when develo** machine-learned force fields. The tests presented in this work provide a necessary foundation for the development and application of machine-learned force fields for materials simulations.
△ Less
Submitted 15 January, 2023; v1 submitted 9 January, 2023;
originally announced January 2023.
-
Folding lattice proteins with quantum annealing
Authors:
Anders Irbäck,
Lucas Knuthson,
Sandipan Mohanty,
Carsten Peterson
Abstract:
Quantum annealing is a promising approach for obtaining good approximate solutions to difficult optimization problems. Folding a protein sequence into its minimum-energy structure represents such a problem. For testing new algorithms and technologies for this task, the minimal lattice-based HP model is well suited, as it represents a considerable challenge despite its simplicity. The HP model has…
▽ More
Quantum annealing is a promising approach for obtaining good approximate solutions to difficult optimization problems. Folding a protein sequence into its minimum-energy structure represents such a problem. For testing new algorithms and technologies for this task, the minimal lattice-based HP model is well suited, as it represents a considerable challenge despite its simplicity. The HP model has favorable interactions between adjacent, not directly bound hydrophobic residues. Here, we develop a novel spin representation for lattice protein folding tailored for quantum annealing. With a distributed encoding onto the lattice, it differs from earlier attempts to fold lattice proteins on quantum annealers, which were based upon chain growth techniques. With our encoding, the Hamiltonian by design has the quadratic structure required for calculations on an Ising-type annealer, without having to introduce any auxiliary spin variables. This property greatly facilitates the study of long chains. The approach is robust to changes in the parameters required to constrain the spin system to chain-like configurations, and performs very well in terms of solution quality. The results are evaluated against existing exact results for HP chains with up to $N=30$ beads with 100% hit rate, thereby also outperforming classical simulated annealing. In addition, the method allows us to recover the lowest known energies for $N=48$ and $N=64$ HP chains, with similar hit rates. These results are obtained by the commonly used hybrid quantum-classical approach. For pure quantum annealing, our method successfully folds an $N=14$ HP chain. The calculations were performed on a D-Wave Advantage quantum annealer.
△ Less
Submitted 12 October, 2022; v1 submitted 12 May, 2022;
originally announced May 2022.
-
Computational Approaches to Model X-ray Photon Correlation Spectroscopy from Molecular Dynamics
Authors:
Shaswat Mohanty,
Christopher B. Cooper,
Hui Wang,
Mengning Liang,
Wei Cai
Abstract:
X-ray photon correlation spectroscopy (XPCS) allows for the resolution of dynamic processes within a material across a wide range of length and time scales. X-ray speckle visibility spectroscopy (XSVS) is a related method that uses a single diffraction pattern to probe ultrafast dynamics. Interpretation of the XPCS and XSVS data in terms of underlying physical processes is necessary to establish t…
▽ More
X-ray photon correlation spectroscopy (XPCS) allows for the resolution of dynamic processes within a material across a wide range of length and time scales. X-ray speckle visibility spectroscopy (XSVS) is a related method that uses a single diffraction pattern to probe ultrafast dynamics. Interpretation of the XPCS and XSVS data in terms of underlying physical processes is necessary to establish the connection between the macroscopic responses and the microstructural dynamics. To aid the interpretation of the XPCS and XSVS data, we present a computational framework to model these experiments by computing the X-ray scattering intensity directly from the atomic positions obtained from molecular dynamics (MD) simulations. We compare the efficiency and accuracy of two alternative computational methods: the direct method computing the intensity at each diffraction vector separately, and a method based on fast Fourier transform that computes the intensities at all diffraction vectors at once. The computed X-ray speckle patterns capture the density fluctuations over a range of length and time scales and are shown to reproduce the known properties and relations of experimental XPCS and XSVS for liquids.
△ Less
Submitted 5 January, 2023; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Effect of Positive Polarity in an Inertial Electrostatic Confinement Fusion Device: Electron Confinement, X-ray Production, and Radiography
Authors:
D. Bhattacharjee,
S. R. Mohanty,
S. Adhikari
Abstract:
The conventional inertial electrostatic confinement fusion (IECF) operation is based on the application of high negative voltage to the central grid which results in the production of neutrons due to the fusion of lighter ions. The neutron has enormous applications in diversified fields. Apart from the neutrons, it can also be used as an application based x-ray source by altering the polarity of t…
▽ More
The conventional inertial electrostatic confinement fusion (IECF) operation is based on the application of high negative voltage to the central grid which results in the production of neutrons due to the fusion of lighter ions. The neutron has enormous applications in diversified fields. Apart from the neutrons, it can also be used as an application based x-ray source by altering the polarity of the central grid. In this work, the electron dynamics during the positive polarity of the central grid have been studied using an object-oriented particle-in-cell code (XOOPIC). The trapped electron density inside the anode is found to be of the order of 1016 m-3 during 10 kV simulation. The re-circulatory characteristics of the electrons are also studied from the velocity distribution function. The x-ray production, imaging and radiography have been investigated at different voltages and using different structure of the anode. The x-ray emitting zone have been studied via pinhole imaging technique. Lastly, the radiography of metallic as well as biological samples have been studied in the later part of this paper. This study shows the versatile nature of the IECF device in terms of its applications, both in the field of neutron and x-ray.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Iterative time-domain method for resolving multiple gravitational wave sources in Pulsar Timing Array data
Authors:
Yi-Qian Qian,
Soumya D. Mohanty,
Yan Wang
Abstract:
The sensitivity of ongoing searches for gravitational wave (GW) sources in the ultra-low frequency regime ($10^{-9}$ Hz to $10^{-7}$ Hz) using Pulsar Timing Arrays (PTAs) will continue to increase in the future as more well-timed pulsars are added to the arrays. It is expected that next-generation radio telescopes, namely, the Five-hundred-meter Aperture Spherical radio Telescope (FAST) and the Sq…
▽ More
The sensitivity of ongoing searches for gravitational wave (GW) sources in the ultra-low frequency regime ($10^{-9}$ Hz to $10^{-7}$ Hz) using Pulsar Timing Arrays (PTAs) will continue to increase in the future as more well-timed pulsars are added to the arrays. It is expected that next-generation radio telescopes, namely, the Five-hundred-meter Aperture Spherical radio Telescope (FAST) and the Square Kilometer Array (SKA), will grow the number of well-timed pulsars to $O(10^3)$. The higher sensitivity will result in greater distance reach for GW sources, uncovering multiple resolvable GW sources in addition to an unresolved population. Data analysis techniques are, therefore, required that can search for and resolve multiple signals present simultaneously in PTA data. The multisource resolution problem in PTA data analysis poses a unique set of challenges such as non-uniformly sampled data, a large number of so-called pulsar phase parameters that arise from the inaccurately measured distances to the pulsars, and poor separation of signals in the Fourier domain due to a small number of cycles in the observed waveforms.
△ Less
Submitted 1 July, 2022; v1 submitted 28 October, 2021;
originally announced October 2021.
-
Magnetoelastic anisotropy in Heusler-type Mn$_{2-δ}$CoGa$_{1+δ}$ films
Authors:
Takahide Kubota,
Daichi Takano,
Yohei Kota,
Shaktiranjan Mohanty,
Keita Ito,
Mitsuhiro Matsuki,
Masahiro Hayashida,
Mingling Sun,
Yukiharu Takeda,
Yuji Saitoh,
Subhankar Bedanta,
Akio Kimura,
Koki Takanashi
Abstract:
Perpendicular magnetization is essential for high-density memory application using magnetic materials. High-spin polarization of conduction electrons is also required for realizing large electric signals from spin-dependent transport phenomena. Heusler alloy is a well-known material class showing the half-metallic electronic structure. However, its cubic lattice nature favors in-plane magnetizatio…
▽ More
Perpendicular magnetization is essential for high-density memory application using magnetic materials. High-spin polarization of conduction electrons is also required for realizing large electric signals from spin-dependent transport phenomena. Heusler alloy is a well-known material class showing the half-metallic electronic structure. However, its cubic lattice nature favors in-plane magnetization and thus minimizes the perpendicular magnetic anisotropy (PMA), in general. This study focuses on an inverse-type Heusler alloy, Mn$_{2-δ}$CoGa$_{1+δ}$ (MCG) with a small off-stoichiometry ($δ$) , which is expected to be a half-metallic material. We observed relatively large uniaxial magnetocrystalline anisotropy constant ($K_\mathrm{u}$) of the order of 10$^5$ J/m$^3$ at room temperature in MCG films with a small tetragonal distortion of a few percent. A positive correlation was confirmed between the $c/a$ ratio of lattice constants and $K_\mathrm{u}$. Imaging of magnetic domains using Kerr microscopy clearly demonstrated a change in the domain patterns along with $K_\mathrm{u}$. X-ray magnetic circular dichroism (XMCD) was employed using synchrotron radiation soft x-ray beam to get insight into the origin for PMA. Negligible angular variation of orbital magnetic moment ($Δm_\mathrm{orb}$) evaluated using the XMCD spectra suggested a minor role of the so-called Bruno's term to $K_\mathrm{u}$. Our first principles calculation reasonably explained the small $Δm_\mathrm{orb}$ and the positive correlation between the $c/a$ ratio and $K_\mathrm{u}$. The origin of the magnetocrystalline anisotropy was discussed based on the second-order perturbation theory in terms of the spin--orbit coupling, claiming that the mixing of the occupied $\uparrow$- and the unoccupied $\downarrow$-spin states is responsible for the PMA of the MCG films.
△ Less
Submitted 5 March, 2022; v1 submitted 25 August, 2021;
originally announced August 2021.
-
Everything You Wanted to Know About Noninvasive Glucose Measurement and Control
Authors:
Prateek Jain,
Amit M. Joshi,
Saraju Mohanty
Abstract:
Diabetes is a chronicle disease where the body of a human is irregular to dissolve the blood glucose properly. The diabetes is due to lack of insulin in human body. The continuous monitoring of blood glucose is main important aspect for health care. Most of the successful glucose monitoring devices is based on methodology of pricking of blood. However, such kind of approach may not be advisable fo…
▽ More
Diabetes is a chronicle disease where the body of a human is irregular to dissolve the blood glucose properly. The diabetes is due to lack of insulin in human body. The continuous monitoring of blood glucose is main important aspect for health care. Most of the successful glucose monitoring devices is based on methodology of pricking of blood. However, such kind of approach may not be advisable for frequent measurement. The paper presents the extensive review of glucose measurement techniques. The paper covers various non-invasive glucose methods and its control with smart healthcare technology. To fulfill the imperatives for non-invasive blood glucose monitoring system, there is a need to configure an accurate measurement device. Noninvasive glucose-level monitoring device for clinical test overcomes the problem of frequent pricking for blood samples. There is requirement to develop the Internet-Medical-Things (IoMT) integrated Healthcare Cyber-Physical System (H-CPS) based Smart Healthcare framework for glucose measurement with purpose of continuous health monitoring. The paper also covers selective consumer products along with selected state of art glucose measurement approaches. The paper has also listed several challenges and open problems for glucose measurement.
△ Less
Submitted 11 February, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Kinetic characteristics of ions in an inertial electrostatic confinement device
Authors:
D. Bhattacharjee,
S. Adhikari,
N. Buzarbaruah,
S. R. Mohanty
Abstract:
The kinetic analyses are quite important when it comes to understand the particle behavior in any device as they start to deviate from continuum nature. In the present study, kinetic simulations are performed using Particle-in-Cell (PIC) method to analyze the behavior of ions inside a cylindrical Inertial Electrostatic Confinement Fusion (IECF) device which is being developed as a tabletop neutron…
▽ More
The kinetic analyses are quite important when it comes to understand the particle behavior in any device as they start to deviate from continuum nature. In the present study, kinetic simulations are performed using Particle-in-Cell (PIC) method to analyze the behavior of ions inside a cylindrical Inertial Electrostatic Confinement Fusion (IECF) device which is being developed as a tabletop neutron source. Here, the lighter ions, like deuterium are accelerated by applying an electrostatic field between the chamber wall (anode) and the cathode (cylindrical gridded wire), placed at the center of the device. The plasma potential profiles obtained from the simulated results indicate the formation of multiple potential well structures inside the cathode grid depending upon the applied cathode potential (from $-1$ to $-5~kV$). The ion density at the core region of the device is found to be of the order of $10^{16}~m^{-3}$, which closely resembles the experimental observations. Spatial variation of Ion Energy Distribution Function (IEDF) has been measured in order to observe the characteristics of ions at different cathode voltages. Finally, the simulated results are compared and found to be in good agreement with the experimental profiles. The present analysis can serve as a reference guide to optimize the technological parameters of the discharge process in IECF devices.
△ Less
Submitted 25 November, 2020; v1 submitted 14 February, 2020;
originally announced February 2020.
-
Markov modeling of peptide folding in the presence of protein crowders
Authors:
Daniel Nilsson,
Sandipan Mohanty,
Anders Irbäck
Abstract:
We use Markov state models (MSMs) to analyze the dynamics of a $β$-hairpin-forming peptide in Monte Carlo (MC) simulations with interacting protein crowders, for two different types of crowder proteins [bovine pancreatic trypsin inhibitor (BPTI) and GB1]. In these systems, at the temperature used, the peptide can be folded or unfolded and bound or unbound to crowder molecules. Four or five major f…
▽ More
We use Markov state models (MSMs) to analyze the dynamics of a $β$-hairpin-forming peptide in Monte Carlo (MC) simulations with interacting protein crowders, for two different types of crowder proteins [bovine pancreatic trypsin inhibitor (BPTI) and GB1]. In these systems, at the temperature used, the peptide can be folded or unfolded and bound or unbound to crowder molecules. Four or five major free-energy minima can be identified. To estimate the dominant MC relaxation times of the peptide, we build MSMs using a range of different time resolutions or lag times. We show that stable relaxation-time estimates can be obtained from the MSM eigenfunctions through fits to autocorrelation data. The eigenfunctions remain sufficiently accurate to permit stable relaxation-time estimation down to small lag times, at which point simple estimates based on the corresponding eigenvalues have large systematic uncertainties. The presence of the crowders have a stabilizing effect on the peptide, especially with BPTI crowders, which can be attributed to a reduced unfolding rate $k_\text{u}$, while the folding rate $k_\text{f}$ is left largely unchanged.
△ Less
Submitted 29 January, 2018;
originally announced January 2018.
-
Introduction of impermeable actin-staining molecules to mammalian cells by optoporation
Authors:
Kamal Dhakal,
Bryan Black,
Samarendra Mohanty
Abstract:
The selective insertion of foreign materials, such as fluorescent markers or plasmids, into living cells has been a challenging problem in cell biology.However, it is often necessary that researchers insert such materials into cells for various dynamical and/or drug delivery studies. This problem becomes even more challenging if the study is to be limited to specific cells within a larger populati…
▽ More
The selective insertion of foreign materials, such as fluorescent markers or plasmids, into living cells has been a challenging problem in cell biology.However, it is often necessary that researchers insert such materials into cells for various dynamical and/or drug delivery studies. This problem becomes even more challenging if the study is to be limited to specific cells within a larger population, since other transfection methods, such as viral transfection and lipofection, are not realizable with a high degree of spatial selectivity.Here, we have used a focused femtosecond laser beam to create a small transient hole in the cellular membrane (optoporation) in order to inject nanomolar concentrations of rhodamine phalloidin (an impermeable dye molecule for staining filamentous actin) into targeted living mammalian cells (both HEK and primary cortical neurons).Following optoporation, the bound to the intracellular actin network and rise in fluorescence intensity was observed...
△ Less
Submitted 25 February, 2016;
originally announced February 2016.
-
Non-Scanning Fiber-Optic Near-Infrared Beam Led to Two-Photon Optogenetic Stimulation In-Vivo
Authors:
Kamal R. Dhakal,
Ling Gu,
Shivaranjani Shivalingaiah,
Torry S. Dennis,
Samara A. Morris-Bobzean,
Ting Li,
Linda I. Perrotti,
Samarendra K. Mohanty
Abstract:
Stimulation of specific neurons expressing opsins in a targeted region to manipulate brain function has proved to be a powerful tool in neuroscience. However, the use of visible light for optogenetic stimulation is invasive due to low penetration depth and tissue damage owing to larger absorption and scattering. Here, we report, for the first time, in-depth non-scanning fiber-optic two-photon opto…
▽ More
Stimulation of specific neurons expressing opsins in a targeted region to manipulate brain function has proved to be a powerful tool in neuroscience. However, the use of visible light for optogenetic stimulation is invasive due to low penetration depth and tissue damage owing to larger absorption and scattering. Here, we report, for the first time, in-depth non-scanning fiber-optic two-photon optogenetic stimulation (FO-TPOS) of neurons in-vivo in transgenic mouse models. In order to optimize the deep-brain stimulation strategy, we characterized two-photon activation efficacy at different nearinfrared laser parameters. The significantly-enhanced in-depth stimulation efficiency of FO-TPOS as compared to conventional single-photon beam was demonstrated both by experiments and Monte Carlo simulation. The non-scanning FO-TPOS technology will lead to better understanding of the in-vivo neural circuitry because this technology permits more precise and less invasive anatomical delivery of stimulation.
△ Less
Submitted 25 February, 2016;
originally announced February 2016.
-
Quantitative analysis of the nanoscale intra-nuclear structural alterations in hippocampal cells in chronic alcoholism via transmission electron microscopy study
Authors:
Peeyush Sahay,
Pradeep Shukla,
Hemendra M. Ghimire,
Huda Almabadi,
Vibha Tripathi,
Samarendra K. Mohanty,
Radhakrishna Rao,
Prabhakar Pradhan
Abstract:
Chronic alcoholism is known to alter morphology of hippocampal, an important region of cognitive function in the brain. We performed quantification of nanoscale structural alterations in nuclei of hippocampal neuron cells due to chronic alcoholism, in mice model. Transmission electron microscopy images of the neuron cells were obtained and the degrees of structural alteration, in terms of mass den…
▽ More
Chronic alcoholism is known to alter morphology of hippocampal, an important region of cognitive function in the brain. We performed quantification of nanoscale structural alterations in nuclei of hippocampal neuron cells due to chronic alcoholism, in mice model. Transmission electron microscopy images of the neuron cells were obtained and the degrees of structural alteration, in terms of mass density fluctuations, were determined using the recently developed light localization analysis technique. The results, obtained at the length scales ranging from 33 to 195 nm, show that the 4-week alcohol fed mice have higher degree of structural alteration in comparison to the control mice. The degree of structural alterations starts becoming significantly distinguishable around 100 nm sample length, which is the typical length scale of the building blocks of cells, such as DNA, RNA, etc. Different degrees of structural alterations at such length scales suggest possible structural rearrangement of chromatin inside the nuclei.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Drag correlation for dilute and moderately dense fluid-particle systems using the lattice Boltzmann method
Authors:
Simon Bogner,
Swati Mohanty,
Ulrich Rüde
Abstract:
This paper presents a numerical study of flow through static random assemblies of monodisperse, spherical particles. A lattice Boltzmann approach based on a two relaxation time collision operator is used to obtain reliable predictions of the particle drag by direct numerical simulation. From these predictions a closure law $F(Re, {\varphi})$ of the drag force relationship to the bed density…
▽ More
This paper presents a numerical study of flow through static random assemblies of monodisperse, spherical particles. A lattice Boltzmann approach based on a two relaxation time collision operator is used to obtain reliable predictions of the particle drag by direct numerical simulation. From these predictions a closure law $F(Re, {\varphi})$ of the drag force relationship to the bed density ${\varphi}$ and the particle Reynolds number $Re$ is derived. The present study includes densities ${\varphi}$ ranging from $0.01$ to $0.35$ with Re ranging up to $300$, that is compiled into a single drag correlation valid for the whole range. The corelation has a more compact expression compared to others previously reported in literature. At low particle densities, the new correlation is close to the widely used Wen & Yu - correlation. Recently, there has been reported a discrepancy between results obtained using different numerical methods, namely the comprehensive lattice Boltzmann study of Beetstra et al. (2007) and the predictions based on an immersed boundary - pseudo-spectral Navier-Stokes approach (Tenneti et al., 2011). The present study excludes significant finite resolution effects, which have been suspected to cause the reported deviations, but does not coincide exactly with either of the previous studies. This indicates the need for yet more accurate simulation methods in the future.
△ Less
Submitted 7 October, 2014; v1 submitted 9 January, 2014;
originally announced January 2014.
-
Teaching introductory undergraduate Physics using commercial video games
Authors:
Soumya D. Mohanty,
Sergio Cantu
Abstract:
Commercial video games are increasingly using sophisticated physics simulations to create a more immersive experience for players. This also makes them a powerful tool for engaging students in learning physics. We provide some examples to show how commercial off-the-shelf games can be used to teach specific topics in introductory undergraduate physics. The examples are selected from a course taugh…
▽ More
Commercial video games are increasingly using sophisticated physics simulations to create a more immersive experience for players. This also makes them a powerful tool for engaging students in learning physics. We provide some examples to show how commercial off-the-shelf games can be used to teach specific topics in introductory undergraduate physics. The examples are selected from a course taught predominantly through the medium of commercial video games.
△ Less
Submitted 26 July, 2011;
originally announced July 2011.
-
Particle Swarm Optimization and gravitational wave data analysis: Performance on a binary inspiral testbed
Authors:
Yan Wang,
Soumya D. Mohanty
Abstract:
The detection and estimation of gravitational wave (GW) signals belonging to a parameterized family of waveforms requires, in general, the numerical maximization of a data-dependent function of the signal parameters. Due to noise in the data, the function to be maximized is often highly multi-modal with numerous local maxima. Searching for the global maximum then becomes computationally expensiv…
▽ More
The detection and estimation of gravitational wave (GW) signals belonging to a parameterized family of waveforms requires, in general, the numerical maximization of a data-dependent function of the signal parameters. Due to noise in the data, the function to be maximized is often highly multi-modal with numerous local maxima. Searching for the global maximum then becomes computationally expensive, which in turn can limit the scientific scope of the search. Stochastic optimization is one possible approach to reducing computational costs in such applications. We report results from a first investigation of the Particle Swarm Optimization (PSO) method in this context. The method is applied to a testbed motivated by the problem of detection and estimation of a binary inspiral signal. Our results show that PSO works well in the presence of high multi-modality, making it a viable candidate method for further applications in GW data analysis.
△ Less
Submitted 6 January, 2010;
originally announced January 2010.
-
A Robust Test for Detecting Non-Stationarity in Data from Gravitational Wave Detectors
Authors:
Soumya D. Mohanty
Abstract:
It is difficult to choose detection thresholds for tests of non-stationarity that assume {\em a priori} a noise model if the data is statistically uncharacterized to begin with. This is a potentially serious problem when an automated analysis is required, as would be the case for the huge data sets that large interferometric gravitational wave detectors will produce. A solution is proposed in th…
▽ More
It is difficult to choose detection thresholds for tests of non-stationarity that assume {\em a priori} a noise model if the data is statistically uncharacterized to begin with. This is a potentially serious problem when an automated analysis is required, as would be the case for the huge data sets that large interferometric gravitational wave detectors will produce. A solution is proposed in the form of a {\em robust} time-frequency test for detecting non-stationarity whose threshold for a specified false alarm rate is almost independent of the statistical nature of the ambient stationary noise. The efficiency of this test in detecting bursts is compared with that of an ideal test that requires prior information about both the statistical distribution of the noise and also the frequency band of the burst. When supplemented with an approximate knowledge of the burst duration, this test can detect, at the same false alarm rate and detection probability, bursts that are about 3 times larger in amplitude than those that the ideal test can detect. Apart from being robust, this test has properties which make it suitable as an online monitor of stationarity.
△ Less
Submitted 14 June, 2000; v1 submitted 7 October, 1999;
originally announced October 1999.
-
Evidence for Compact Dark Matter in Galactic Halos
Authors:
S. Abbas,
A. Abbas,
S. Mohanty
Abstract:
Clumped dark matter arises naturally within the framwork of generic cosmological dark matter models. Invoking the existence of dark matter clumps can also solve may unexplained mysteries in astrophysics and geology or geophysics, eg. the galactic gamma-ray halo and the periodic terrestrial flood basalt volcanic episodes. Clumped dark matter is dynamically stable to friction and will not heat the…
▽ More
Clumped dark matter arises naturally within the framwork of generic cosmological dark matter models. Invoking the existence of dark matter clumps can also solve may unexplained mysteries in astrophysics and geology or geophysics, eg. the galactic gamma-ray halo and the periodic terrestrial flood basalt volcanic episodes. Clumped dark matter is dynamically stable to friction and will not heat the disk. Such clumps may have already been discovered in the form of dwarf spheroidals, and further searches are encouraged by the results of this paper.
△ Less
Submitted 21 November, 1999; v1 submitted 11 October, 1999;
originally announced October 1999.
-
Anoxia duirng the Late Permian Binary Mass Extinction and Dark Matter
Authors:
Samar Abbas,
Afsar Abbas,
Shukadev Mohanty
Abstract:
Recent evidence quite convincingly indicates that the Late Permian biotic crisis was in fact a binary extinction with a distinct end-Guadalupian extinction pulse preceding the major terminal end-Permian Tartarian event by 5 million years. In addition anoxia appears to be closely associated with each of these end-Paleozoic binary extinctions. Most leading models cannot explain both anoxia and the…
▽ More
Recent evidence quite convincingly indicates that the Late Permian biotic crisis was in fact a binary extinction with a distinct end-Guadalupian extinction pulse preceding the major terminal end-Permian Tartarian event by 5 million years. In addition anoxia appears to be closely associated with each of these end-Paleozoic binary extinctions. Most leading models cannot explain both anoxia and the binary characteristic of this crisis. In this paper we show that the recently proposed volcanogenic dark matter scenario succeeds in doing this.
△ Less
Submitted 26 May, 1998;
originally announced May 1998.
-
Double Mass Extinctions and the Volcanogenic Dark Matter Scenario
Authors:
Samar Abbas,
Afsar Abbas,
Shukadev Mohanty
Abstract:
A few of the major mass extinctions of paleontology have recently been found to consist of two distinct extinction peaks at higher resolution. A viable explanation for this remains elusive. In this paper it is shown that the recently proposed volcanogenic dark matter model can explain this puzzling characteristic of these extinctions. The accumulation and annihilation of dark matter in the cente…
▽ More
A few of the major mass extinctions of paleontology have recently been found to consist of two distinct extinction peaks at higher resolution. A viable explanation for this remains elusive. In this paper it is shown that the recently proposed volcanogenic dark matter model can explain this puzzling characteristic of these extinctions. The accumulation and annihilation of dark matter in the center of the Earth due to the passage of a clump leads to excess heat generation with the consequent ejection of superplumes, followed by massive volcanism and attendant mass extinctions. This is preceded by an extinction pulse due to carcinogenesis arising from the direct interaction of the clumped dark matter with living organisms.
△ Less
Submitted 12 May, 1998;
originally announced May 1998.
-
A New Signature of Dark Matter
Authors:
S. Abbas,
A. Abbas,
S. Mohanty
Abstract:
Dark matter capture and annihilation in planets and their satellites, in addition to producing neutrinos (already the basis of several ongoing experiments), is shown to lead to more significant heat generation in these bodies for a uniform dark matter halo. This thermal output becomes more prominent when clumped dark matter passes through the solar system. The dark matter annihilations should be…
▽ More
Dark matter capture and annihilation in planets and their satellites, in addition to producing neutrinos (already the basis of several ongoing experiments), is shown to lead to more significant heat generation in these bodies for a uniform dark matter halo. This thermal output becomes more prominent when clumped dark matter passes through the solar system. The dark matter annihilations should be treated as a new source of heat in the solar system which in some special cases may lead to unique imprints. Such new signatures of the dark matter are found in the generation of the puzzling magnetic field of Ganymede. This new source of heat perhaps cannot explain the formation and segregation of Ganymedean structure (which are probably due to conventional gravitational and radioactive heating), but provides a possible explanation of the origin of the Ganymedean magnetic field.
△ Less
Submitted 31 December, 1998; v1 submitted 6 September, 1997;
originally announced September 1997.