-
An optical transition-edge sensor with high energy resolution
Authors:
Kaori Hattori,
Toshio Konno,
Yoshitaka Miura,
Sachiko Takasu,
Daiji Fukuda
Abstract:
Optical transition-edge sensors have shown energy resolution for resolving the number of incident photons at the telecommunication wavelength. Higher energy resolution is required for biological imaging and microscope spectroscopy. In this paper, we report on a Au/Ti (10/20 nm) bilayer TES that showed high energy resolution. This was achieved by lowering the critical temperature Tc to 115 mK and t…
▽ More
Optical transition-edge sensors have shown energy resolution for resolving the number of incident photons at the telecommunication wavelength. Higher energy resolution is required for biological imaging and microscope spectroscopy. In this paper, we report on a Au/Ti (10/20 nm) bilayer TES that showed high energy resolution. This was achieved by lowering the critical temperature Tc to 115 mK and the resultant energy resolution was 67 meV full width at half maximum (FWHM) at 0.8 eV. When Tc was lowered to 115 mK, the theoretical resolution would scaled up to 30 meV FWHM, considering that the typical energy resolution of optical TESs is 150 meV and Tc is 300 mK. To investigate the gap between the theoretical expectation (30 meV) and the measured value (67 meV), we measured its complex impedance and current noise. We found excess Johnson noise in the TES and an excess Johnson term M was 1.5 at a bias point where the resistance was 10% of normal resistance. For reference, the TES was compared with a TES showing typical energy resolution (156 meV FWHM). We will discuss what improved the energy resolution and what might have been the limiting factor on it.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Energy reconstruction of hadronic showers at the CERN PS and SPS using the Semi-Digital Hadronic Calorimeter
Authors:
I. Laktineh,
B. Liu,
D. Boumediene,
Y. W. Baek,
D-W. Kim,
S. C. Lee,
B. G. Min,
S. W. Park,
Y. Deguchi,
K. Kawagoe,
Y. Miura,
R. Mori,
I. Sekiya,
T. Suehara,
T. Yoshioka,
L. Caponetto,
C. Combaret,
G. Garillot,
G. Grenier,
J-C. Ianigro,
T. Kurca,
I. Laktineh,
B. Liu,
B. Li,
N. Lumb
, et al. (53 additional authors not shown)
Abstract:
The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm…
▽ More
The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm $\times$ 1~cm pickup pads combined to a multi-threshold electronics. The prototype was exposed to hadron beams in both the CERN PS and the SPS beamlines in 2015 allowing the test of the SDHCAL in a large energy range from 3~GeV to 80~GeV. After introducing the method used to select the hadrons of our data and reject the muon and electron contamination, we present the energy reconstruction approach that we apply to the data collected from both beamlines and we discuss the response linearity and the energy resolution of the SDHCAL. The results obtained in the two beamlines confirm the excellent SDHCAL performance observed with the data collected with the same prototype in the SPS beamline in 2012. They also show the stability of the SDHCAL in different beam conditions and different time periods.
△ Less
Submitted 19 February, 2022;
originally announced February 2022.
-
Combinatorial tuning of electronic structure and thermoelectric properties in Co$_2$MnAl$_{1-x}$Si$_x$ Weyl semimetals
Authors:
Rajkumar Modak,
Kazuki Goto,
Shigenori Ueda,
Yoshio Miura,
Ken-ichi Uchida,
Yuya Sakuraba
Abstract:
A tuning of Fermi level (E$_F$) near Weyl points is one of the promising approaches to realize large anomalous Nernst effect (ANE). In this work, we introduce an efficient approach to tune E$_F$ for the Co$_2$MnAl Weyl semimetal through a layer-by-layer combinatorial deposition of Co$_2$MnAl$_{1-x}$Si$_x$ (CMAS) thin film. A single-crystalline composition-spread film with x varied from 0 to 1 was…
▽ More
A tuning of Fermi level (E$_F$) near Weyl points is one of the promising approaches to realize large anomalous Nernst effect (ANE). In this work, we introduce an efficient approach to tune E$_F$ for the Co$_2$MnAl Weyl semimetal through a layer-by-layer combinatorial deposition of Co$_2$MnAl$_{1-x}$Si$_x$ (CMAS) thin film. A single-crystalline composition-spread film with x varied from 0 to 1 was fabricated. The structural characterization reveals the formation of single-phase CMAS alloy throughout the composition range with a gradual improvement of L2$_1$ order with x similar to the co-sputtered single layered film, which validates the present fabrication technique. Hard X-ray photoemission spectroscopy for the CMAS composition-spread film directly confirmed the rigid band-like E$_F$ shift of approximately 0.40 eV towards the composition gradient direction from x = 0 to 1. The anomalous Ettingshausen effect (AEE), the reciprocal of ANE, has been measured for whole x range using a single strip along the composition gradient using the lock-in thermography technique. The similarity of the x dependence of observed AEE and ANE signals clearly demonstrates that the AEE measurement on the composition spread film is an effective approach to investigate the composition dependence of ANE of Weyl semimetal thin films and realize the highest performance without fabricating several films, which will accelerate the research for ANE-based energy harvesting
△ Less
Submitted 11 March, 2021; v1 submitted 12 February, 2021;
originally announced February 2021.
-
Lattice dynamics effects on finite-temperature stability of $R_{1-x}$Fe$_{x}$ ($R$ = Y, Ce, Nd, Sm, and Dy) alloys from first principles
Authors:
Guangzong Xing,
Takahiro Ishikawa,
Yoshio Miura,
Takashi Miyake,
Terumasa Tadano
Abstract:
We report the effects of lattice dynamics on thermodynamic stability of binary $R_{1-x}$Fe$_x$ $(0<x<1)$ compounds ($R$: rare-earth elements, Y, Ce, Nd, Sm, and Dy) at finite temperature predicted by first-principles calculation based on density functional theory (DFT). We first demonstrate that the thermodynamic stability of $R_{1-x}$Fe$_x$ $(0<x<1)$ alloys cannot be predicted accurately by the c…
▽ More
We report the effects of lattice dynamics on thermodynamic stability of binary $R_{1-x}$Fe$_x$ $(0<x<1)$ compounds ($R$: rare-earth elements, Y, Ce, Nd, Sm, and Dy) at finite temperature predicted by first-principles calculation based on density functional theory (DFT). We first demonstrate that the thermodynamic stability of $R_{1-x}$Fe$_x$ $(0<x<1)$ alloys cannot be predicted accurately by the conventional approach, where only the static DFT energy at $T = 0$ K is used. This issue can be overcome by considering the entropy contribution, including electronic and vibrational free energies, and we obtained convex hull plots at finite temperatures that successfully explain the thermodynamic stability of various known compounds. Our systematic calculation indicates that vibrational entropy helps stabilize various $R_{1-x}$Fe$_x$ compounds with increasing temperature. In particular, experimentally reported $R_2$Fe$_{17}$ compounds are predicted to become thermodynamically stable above $\sim$800 K. We also show that thermodynamic stability is rare-earth dependent and discuss its origin. Besides the experimentally reported structures, the stability of two new monoclinic $R$Fe$_{12}$ structures found by Ishikawa \textit{et al.} [Phys. Rev. Mater.~\textbf{4}, 104408 (2020)] based on a genetic algorithm are investigated. These monoclinic phases are found to be dynamically stable and have larger magnetization than the ThMn$_{12}$-type $R$Fe$_{12}$. Although they are thermodynamically unstable, the formation energies decrease significantly with increasing temperature, indicating the possibility of synthesizing these compounds at high temperatures.
△ Less
Submitted 4 February, 2021;
originally announced February 2021.
-
Enhancement of anomalous Nernst effect in Ni/Pt superlattice
Authors:
T. Seki,
Y. Sakuraba,
K. Masuda,
A. Miura,
M. Tsujikawa,
K. Uchida,
T. Kubota,
Y. Miura,
M. Shirai,
K. Takanashi
Abstract:
We report an enhancement of the anomalous Nernst effect (ANE) in Ni/Pt (001) epitaxial superlattices. The transport and magneto-thermoelectric properties were investigated for the Ni/Pt superlattices with various Ni layer thicknesses (${\it t}$). The anomalous Nernst coefficient was increased up to more than 1 $μ$V K$^{-1}$ for 2.0 nm ${\leq}$ ${\it t}$ ${\leq}$ 4.0 nm, which was the remarkable en…
▽ More
We report an enhancement of the anomalous Nernst effect (ANE) in Ni/Pt (001) epitaxial superlattices. The transport and magneto-thermoelectric properties were investigated for the Ni/Pt superlattices with various Ni layer thicknesses (${\it t}$). The anomalous Nernst coefficient was increased up to more than 1 $μ$V K$^{-1}$ for 2.0 nm ${\leq}$ ${\it t}$ ${\leq}$ 4.0 nm, which was the remarkable enhancement compared to the bulk Ni. It has been found that the large transverse Peltier coefficient ($α$$_{xy}$), reaching $α$$_{xy}$ = 4.8 A K$^{-1}$ m$^{-1}$ for ${\it t}$ = 4.0 nm, plays a prime role for the enhanced ANE of the Ni/Pt (001) superlattices.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype
Authors:
D. Boumediene,
A. **ault,
M. Tytgat,
B. Bilki,
D. Northacker,
Y. Onel,
G. Cho,
D-W. Kim,
S. C. Lee,
W. Park,
S. Vallecorsa,
Y. Deguchi,
K. Kawagoe,
Y. Miura,
R. Mori,
I. Sekiya,
T. Suehara,
T. Yoshioka,
L. Caponetto,
C. Combaret,
R. Ete G. Garillot,
G. Grenier,
J-C. Ianigro,
T. Kurca,
I. Laktineh
, et al. (65 additional authors not shown)
Abstract:
The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines…
▽ More
The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype
Authors:
CALICE Collaboration,
G. Eigen,
T. Price,
N. K. Watson,
A. Winter,
Y. Do,
A. Khan,
D. Kim,
G. C. Blazey,
A. Dyshkant,
K. Francis,
V. Zutshi,
K. Kawagoe,
Y. Miura,
R. Mori,
I. Sekiya,
T. Suehara,
T. Yoshioka,
J. Apostolakis,
J. Giraud,
D. Grondin,
J. -Y. Hostachy,
O. Bach,
V. Bocharnikov,
E. Brianne
, et al. (81 additional authors not shown)
Abstract:
A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorith…
▽ More
A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated.
△ Less
Submitted 18 September, 2019; v1 submitted 16 February, 2019;
originally announced February 2019.
-
Beam test performance of the highly granular SiW-ECAL technological prototype for the ILC
Authors:
K. Kawagoe,
Y. Miura,
I. Sekiya,
T. Suehara,
T. Yoshioka,
S. Bilokin,
J. Bonis,
P. Cornebise,
A. Gallas,
A. Irles,
R. Pöschl,
F. Richard,
A. Thiebault,
D. Zerwas,
M. Anduze,
V. Balagura,
V. Boudry,
J-C. Brient,
E. Edy,
G. Fayolle,
M. Frotin,
F. Gastaldi,
R. Guillaumat,
A. Lobanov,
M. Louzir
, et al. (19 additional authors not shown)
Abstract:
The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprise…
▽ More
The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprised a total of 1024 channels. The readout was split into a trigger line and a charge signal line. Key performance results for signal over noise for the two output lines are presented, together with a study of the uniformity of the detector response. Measurements of the response to electrons for the tungsten loaded version of the detector are also presented.
△ Less
Submitted 22 October, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Analysis of Testbeam Data of the Highly Granular RPC-Steel CALICE Digital Hadron Calorimeter and Validation of Geant4 Monte Carlo Models
Authors:
CALICE Collaboration,
M. Chefdeville,
J. Repond,
J. Schlereth,
J. R. Smith,
D. Trojand,
L. Xia,
Q. Zhang,
J. Apostolakis,
C. Grefe,
V. Ivantchenko,
G. Folger,
A. Ribon,
V. Uzhinskiy,
G. C. Blazey,
A. Dyshkant,
K. Francis,
V. Zutshi,
O. Bach,
V. Bocharnikov,
E. Brianne,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel
, et al. (71 additional authors not shown)
Abstract:
We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of…
▽ More
We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of $1\,\times\,1\,$cm$^{2}$ and a longitudinal segmentation of 38 layers, the calorimeter counted 350,208 readout channels, each read out with single-bit resolution (digital readout). The data were recorded in the Fermilab test beam in 2010-11. The analysis includes measurements of the calorimeter response and the energy resolution to positrons and muons, as well as detailed studies of various shower shape quantities. The results are compared to simulations based on Geant4, which utilise different electromagnetic and hadronic physics lists.
△ Less
Submitted 25 January, 2019;
originally announced January 2019.
-
Commissioning of the highly granular SiW-ECAL technological prototype
Authors:
S. Bilokin,
J. Bonis,
P. Cornebise,
A. Gallas,
A. Irles,
R. Pöschl,
F. Richard,
A. Thiebault,
D. Zerwas,
M. Anduze,
V. Balagura,
V. Boudry,
J-C. Brient,
E. Edy,
G. Fayolle,
M. Frotin,
F. Gastaldi,
A. Lobanov,
F. Magniette,
J. Nanni,
M. Rubio-Roy,
K. Shpak,
H. Videau,
D. Yu,
S. Callier
, et al. (18 additional authors not shown)
Abstract:
In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record si…
▽ More
In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record signals as low as 0.5 MIP. Further, no loss of performance has been observed when operating the detector in a high magnetic field.
△ Less
Submitted 4 April, 2019; v1 submitted 11 October, 2018;
originally announced October 2018.
-
Functional imaging of ganglion and receptor cells in living human retina by osmotic contrast
Authors:
Clara Pfäffle,
Dierck Hillmann,
Hendrik Spahr,
Lisa Kutzner,
Sazan Burhan,
Felix Hilge,
Yoko Miura,
Gereon Hüttmann
Abstract:
Imaging neuronal activity non-invasively in vivo is of tremendous interest, but current imaging techniques lack either functional contrast or necessary microscopic resolution. The retina is the only part of the central nervous system (CNS) that allows us direct optical access. Not only ophthalmic diseases, but also many degenerative disorders of the CNS go along with pathological changes in the re…
▽ More
Imaging neuronal activity non-invasively in vivo is of tremendous interest, but current imaging techniques lack either functional contrast or necessary microscopic resolution. The retina is the only part of the central nervous system (CNS) that allows us direct optical access. Not only ophthalmic diseases, but also many degenerative disorders of the CNS go along with pathological changes in the retina. Consequently, functional analysis of retinal neurons could lead to an earlier and better diagnosis and understanding of those diseases. Recently, we showed that an activation of photoreceptor cells could be visualized in humans using a phase sensitive evaluation of optical coherence tomography data. The optical path length of the outer segments changes by a few hundred nanometers in response to optical stimulation. Here, we show simultaneous imaging of the activation of photoreceptor and ganglion cells. The signals from the ganglion cells are ten-fold smaller than those from the photoreceptor cells and were only visible using new algorithms for suppressing motion artifacts. This allowed us to generate a wiring diagram showing functional connections between photoreceptors and ganglion cells. We present a theoretical model that explains the observed intrinsic optical signals by osmotic volume changes, induced by ion influx or efflux. Since all neuronal activity is associated with ion fluxes, imaging osmotic induced size changes with nanometer precision should visualize activation in any neuron.
△ Less
Submitted 8 September, 2018;
originally announced September 2018.