-
Spatial map** and analysis of graphene nanomechanical resonator networks
Authors:
Brittany Carter,
Viva R. Horowitz,
Uriel Hernandez,
David J. Miller,
Andrew Blaikie,
Benjamín J. Alemán
Abstract:
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development…
▽ More
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development of methods to characterize the constituent NEMS resonator building blocks and their coupling. In this work, we demonstrate a scalable optical technique to spatially map graphene NEMS networks and read out the fixed-frequency collective response as a single vector. Using the response vectors, we introduce an efficient algebraic approach to quantify the site-specific elasticity, mass, dam**, and coupling parameters of network clusters. We apply this technique to accurately characterize single uncoupled resonators and coupled resonator pairs by sampling them at just two frequencies, and without the use of curve fitting or the associated a priori parameter estimates. Our technique may be applied to a range of classical and quantum resonator systems and fills in a vital gap for programming NEMS networks.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Measurement Anomaly of Step Width in Calibration Grating using Atomic Force Microscopy
Authors:
Gun Ahn,
Yoon-Young Choi,
Dean J. Miller,
Hanwook Song,
Kwangsoo No,
Seungbum Hong
Abstract:
We imaged the topography of a silicon grating with atomic force microscopy (AFM) using different scan parameters to probe the effect of pixel pitch on resolution. We found variations in the measured step height and profile of the grating depending on scan parameters, with measured step width decreasing from 1300 to 108 nm and step height increasing from 172 to 184 nm when a pixel pitch in the scan…
▽ More
We imaged the topography of a silicon grating with atomic force microscopy (AFM) using different scan parameters to probe the effect of pixel pitch on resolution. We found variations in the measured step height and profile of the grating depending on scan parameters, with measured step width decreasing from 1300 to 108 nm and step height increasing from 172 to 184 nm when a pixel pitch in the scan axis decreased from 625 nm to 3.91 nm. In order to resolve the measurement anomaly of step width, we compared these values with step width and height of the same grating measured using scanning electron microscopy (SEM). The values obtained from SEM imaging were 187.3 nm +/- 6.2 nm and 116 nm +/- 10.4 nm, which were in good agreement with AFM data using a 3.91 nm of pixel pitch. We think that we need at least four pixels over the step width to avoid the measurement anomaly induced by the stick-slip or dragging of the tip. Our findings that RMS roughness varied less than 1 nm and converged at the value of 77.6 nm for any pixel pitch suggest that the RMS roughness is relatively insensitive to the pixel pitch.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Non-volatile rewritable frequency tuning of a nanoelectromechanical resonator using photoinduced do**
Authors:
David J. Miller,
Andrew Blaikie,
Benjamin J. Aleman
Abstract:
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robu…
▽ More
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robust timing oscillators. Much like their electronic device counterparts, the potential of NEMS grows when they are built up into large-scale arrays. Such arrays have enabled neutral-particle mass spectroscopy and have been proposed for ultralow-power alternatives to traditional analog electronics as well as nanomechanical information technologies like memory, logic, and computing. A fundamental challenge to these applications is to precisely tune the vibrational frequency and coupling of all resonators in the array, since traditional tuning methods, like patterned electrostatic gating or dielectric tuning, become intractable when devices are densely packed. Here, we demonstrate a persistent, rewritable, scalable, and high-speed frequency tuning method for graphene-based NEMS. Our method uses a focused laser and two shared electrical contacts to photodope individual resonators by simultaneously applying optical and electrostatic fields. After the fields are removed, the trapped charge created by this process persists and applies a local electrostatic tension to the resonators, tuning their frequencies. By providing a facile means to locally address the strain of a NEMS resonator, this approach lays the groundwork for fully programmable large-scale NEMS lattices and networks.
△ Less
Submitted 4 December, 2019; v1 submitted 20 August, 2019;
originally announced August 2019.
-
An MRI-Derived Definition of MCI-to-AD Conversion for Long-Term, Automati c Prognosis of MCI Patients
Authors:
Yaman Aksu,
David J. Miller,
George Kesidis,
Don C. Bigler,
Qing X. Yang
Abstract:
Alzheimer's disease (AD) and mild cognitive impairment (MCI), continue to be widely studied. While there is no consensus on whether MCIs actually "convert" to AD, the more important question is not whether MCIs convert, but what is the best such definition. We focus on automatic prognostication, nominally using only a baseline image brain scan, of whether an MCI individual will convert to AD withi…
▽ More
Alzheimer's disease (AD) and mild cognitive impairment (MCI), continue to be widely studied. While there is no consensus on whether MCIs actually "convert" to AD, the more important question is not whether MCIs convert, but what is the best such definition. We focus on automatic prognostication, nominally using only a baseline image brain scan, of whether an MCI individual will convert to AD within a multi-year period following the initial clinical visit. This is in fact not a traditional supervised learning problem since, in ADNI, there are no definitive labeled examples of MCI conversion. Prior works have defined MCI subclasses based on whether or not clinical/cognitive scores such as CDR significantly change from baseline. There are concerns with these definitions, however, since e.g. most MCIs (and ADs) do not change from a baseline CDR=0.5, even while physiological changes may be occurring. These works ignore rich phenotypical information in an MCI patient's brain scan and labeled AD and Control examples, in defining conversion. We propose an innovative conversion definition, wherein an MCI patient is declared to be a converter if any of the patient's brain scans (at follow-up visits) are classified "AD" by an (accurately-designed) Control-AD classifier. This novel definition bootstraps the design of a second classifier, specifically trained to predict whether or not MCIs will convert. This second classifier thus predicts whether an AD-Control classifier will predict that a patient has AD. Our results demonstrate this new definition leads not only to much higher prognostic accuracy than by-CDR conversion, but also to subpopulations much more consistent with known AD brain region biomarkers. We also identify key prognostic region biomarkers, essential for accurately discriminating the converter and nonconverter groups.
△ Less
Submitted 28 April, 2011;
originally announced April 2011.
-
Results from a Prototype Chicane-Based Energy Spectrometer for a Linear Collider
Authors:
A. Lyapin,
H. J. Schreiber,
M. Viti,
C. Adolphsen,
R. Arnold,
S. Boogert,
G. Boorman,
M. V. Chistiakova,
F. Gournaris,
V. Duginov,
C. Hast,
M. D. Hildreth,
C. Hlaing,
F. Jackson,
O. Khainovsky,
Yu. G. Kolomensky,
S. Kostromin,
K. Kumar,
B. Maiheu,
D. McCormick,
D. J. Miller,
N. Morozov,
T. Orimoto,
E. Petigura,
M. Sadre-Bazzaz
, et al. (7 additional authors not shown)
Abstract:
The International Linear Collider and other proposed high energy e+ e- machines aim to measure with unprecedented precision Standard Model quantities and new, not yet discovered phenomena. One of the main requirements for achieving this goal is a measurement of the incident beam energy with an uncertainty close to 1e-4. This article presents the analysis of data from a prototype energy spectromete…
▽ More
The International Linear Collider and other proposed high energy e+ e- machines aim to measure with unprecedented precision Standard Model quantities and new, not yet discovered phenomena. One of the main requirements for achieving this goal is a measurement of the incident beam energy with an uncertainty close to 1e-4. This article presents the analysis of data from a prototype energy spectrometer commissioned in 2006--2007 in SLAC's End Station A beamline. The prototype was a 4-magnet chicane equipped with beam position monitors measuring small changes of the beam orbit through the chicane at different beam energies. A single bunch energy resolution close to 5e-4 was measured, which is satisfactory for most scenarios. We also report on the operational experience with the chicane-based spectrometer and suggest ways of improving its performance.
△ Less
Submitted 27 January, 2011; v1 submitted 1 November, 2010;
originally announced November 2010.
-
A constructive approach to the special theory of relativity
Authors:
D. J. Miller
Abstract:
Simple physical models of a measuring rod and of a clock are used to demonstrate the contraction of objects and clock retardation in special relativity. It is argued that the models could help in promoting student understanding of special relativity and in distinguishing between dynamical and purely perspectival effects.
Simple physical models of a measuring rod and of a clock are used to demonstrate the contraction of objects and clock retardation in special relativity. It is argued that the models could help in promoting student understanding of special relativity and in distinguishing between dynamical and purely perspectival effects.
△ Less
Submitted 5 July, 2009;
originally announced July 2009.
-
Cavity BPM System Tests for the ILC Spectrometer
Authors:
M. Slater,
C. Adolphsen,
R. Arnold,
S. Boogert,
G. Boorman,
F. Gournaris,
M. Hildreth,
C. Hlaing,
F. Jackson,
O. Khainovski,
Yu. G. Kolomensky,
A. Lyapin,
B. Maiheu,
D. McCormick,
D. J. Miller,
T. J. Orimoto,
Z. Szalata,
M. Thomson,
D. Ward,
M. Wing,
M. Woods
Abstract:
The main physics programme of the International Linear Collider (ILC) requires a measurement of the beam energy at the interaction point with an accuracy of $10^{-4}$ or better. To achieve this goal a magnetic spectrometer using high resolution beam position monitors (BPMs) has been proposed. This paper reports on the cavity BPM system that was deployed to test this proposal. We demonstrate sub-…
▽ More
The main physics programme of the International Linear Collider (ILC) requires a measurement of the beam energy at the interaction point with an accuracy of $10^{-4}$ or better. To achieve this goal a magnetic spectrometer using high resolution beam position monitors (BPMs) has been proposed. This paper reports on the cavity BPM system that was deployed to test this proposal. We demonstrate sub-micron resolution and micron level stability over 20 hours for a $1\m$ long BPM triplet. We find micron-level stability over 1 hour for 3 BPM stations distributed over a $30\m$ long baseline. The understanding of the behaviour and response of the BPMs gained from this work has allowed full spectrometer tests to be carried out.
△ Less
Submitted 9 December, 2007;
originally announced December 2007.
-
A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components
Authors:
M. Woods,
R. Erickson,
J. Frisch,
C. Hast,
R. K. Jobe,
L. Keller,
T. Markiewicz,
T. Maruyama,
D. McCormick,
J. Nelson,
T. Nelson,
N. Phinney,
T. Raubenheimer,
M. Ross,
A. Seryi,
S. Smith,
Z. Szalata,
P. Tenenbaum,
M. Woodley,
D. Angal-Kalinin,
C. Beard,
C. Densham,
J. Greenhalgh,
F. Jackson,
A. Kalinin
, et al. (36 additional authors not shown)
Abstract:
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe…
▽ More
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.
△ Less
Submitted 24 May, 2005;
originally announced May 2005.
-
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
Authors:
B. Badelek,
C. Blochinger,
J. Blumlein,
E. Boos,
R. Brinkmann,
H. Burkhardt,
P. Bussey,
C. Carimalo,
J. Chyla,
A. K. Ciftci,
W. Decking,
A. De Roeck,
V. Fadin,
M. Ferrario,
A. Finch,
H. Fraas,
F. Franke,
M. Galynskii,
A. Gamp,
I. Ginzburg,
R. Godbole,
D. S. Gorbunov,
G. Gounaris,
K. Hagiwara,
L. Han
, et al. (74 additional authors not shown)
Abstract:
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
△ Less
Submitted 6 August, 2001;
originally announced August 2001.
-
The detective Modulation Transfer Function applied to scanned digital radiographic detectors
Authors:
D. J. Miller,
A. Papanestis
Abstract:
An extension of the traditional modulation transfer function (MTF), the detective MTF, is proposed for the evaluation of the resolution of X-ray imaging detectors with non-uniform efficiency on the scale of individual detector elements. The dMTF is shown to give a better representation than does the MTF of the improved resolution reported when the readout of the detectors is enhanced.
An extension of the traditional modulation transfer function (MTF), the detective MTF, is proposed for the evaluation of the resolution of X-ray imaging detectors with non-uniform efficiency on the scale of individual detector elements. The dMTF is shown to give a better representation than does the MTF of the improved resolution reported when the readout of the detectors is enhanced.
△ Less
Submitted 22 August, 1997;
originally announced August 1997.
