Showing 1–28 of 28 results for author: Migliozzi, P

Acoustic Positioning for Deep Sea Neutrino Telescopes with a System of Piezo Sensors Integrated into Glass Spheres

Authors: A. Albert, S. Alves, M. André, M. Ardid, S. Ardid, J. -J. Aubert, J. Aublin, B. Baret, S. Basa, Y. Becherini, B. Belhorma, M. Bendahman, F. Benfenati, V. Bertin, S. Biagi, J. Boumaaza, M. Bouta, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto, B. Caiffi, D. Calvo, S. Campion , et al. (115 additional authors not shown)

Abstract: Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infras… ▽ More Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infrastructure. The ANTARES neutrino telescope operated from 2006 until 2022 in the Mediterranean Sea at a depth exceeding 2000m. It comprised nearly 900 glass spheres with 432mm diameter and 15mm thickness, equipped with photomultiplier tubes to detect Cherenkov light from tracks of charged elementary particles. In an experimental setup within ANTARES, piezo sensors have been glued to the inside of such - otherwise empty - glass spheres. These sensors recorded signals from acoustic emitters with frequencies from 46545 to 60235Hz. Two waves propagating through the glass sphere are found as a result of the excitation by the waves in the water. These can be qualitatively associated with symmetric and asymmetric Lamb-like waves of zeroth order: a fast (early) one with $v_e \approx 5$mm/$μ$s and a slow (late) one with $v_\ell \approx 2$mm/$μ$s. Taking these findings into account improves the accuracy of the position calibration. The results can be transferred to the KM3NeT neutrino telescope, currently under construction at multiple sites in the Mediterranean Sea, for which the concept of piezo sensors glued to the inside of glass spheres has been adapted for monitoring the positions of the photomultiplier tubes. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: submitted to "Experimental Astronomy"

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Nanobeacon: A time calibration device for the KM3NeT neutrino telescope

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, B. Baret, S. Basegmez du Pree, M. Bendahman, F. Benfenati, E. Berbee, A. M. van den Berg, V. Bertine, S. Biagi, M. Boettcher, M. Bou Cabo , et al. (216 additional authors not shown)

Abstract: The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne… ▽ More The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described. △ Less

Submitted 30 October, 2021; originally announced November 2021.

Studying Bioluminescence Flashes with the ANTARES Deep Sea Neutrino Telescope

Authors: N. Reeb, S. Hutschenreuter, P. Zehetner, T. Ensslin, S. Alves, M. André, M. Anghinolfi, G. Anton, M. Ardid, J. -J. Aubert, J. Aublin, B. Baret, S. Basa, B. Belhorma, M. Bendahman, V. Bertin, S. Biagi, M. Bissinger, J. Boumaaza, M. Bouta, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto , et al. (119 additional authors not shown)

Abstract: We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emissio… ▽ More We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emission of individual organisms, as well as their location and movement. A mathematical model is built to describe the measurement process of underwater neutrino telescopes and the signal generation of the biological organisms. The Metric Gaussian Variational Inference algorithm is used to reconstruct the model parameters using photon counts recorded by the neutrino detectors. We apply this method to synthetic data sets and data collected by the ANTARES neutrino telescope. The telescope is located 40 km off the French coast and fixed to the sea floor at a depth of 2475 m. The runs with synthetic data reveal that we can reliably model the emitted bioluminescent flashes of the organisms. Furthermore, we find that the spatial resolution of the localization of light sources highly depends on the configuration of the telescope. Precise measurements of the efficiencies of the detectors and the attenuation length of the water are crucial to reconstruct the light emission. Finally, the application to ANTARES data reveals the first precise localizations of bioluminescent organisms using neutrino telescope data. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

Authors: Sebastiano Aiello, Arnauld Albert, Sergio Alves Garre, Zineb Aly, Fabrizio Ameli, Michel Andre, Giorgos Androulakis, Marco Anghinolfi, Mancia Anguita, Gisela Anton, Miquel Ardid, Julien Aublin, Christos Bagatelas, Giancarlo Barbarino, Bruny Baret, Suzan Basegmez du Pree, Meriem Bendahman, Edward Berbee, Vincent Bertin, Simone Biagi, Andrea Biagioni, Matthias Bissinger, Markus Boettcher, Jihad Boumaaza, Mohammed Bouta , et al. (207 additional authors not shown)

Abstract: The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur… ▽ More The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Journal ref: JINST 15 P10005 (2020)

Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units

Authors: KM3NeT Collaboration, M. Ageron, S. Aiello, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, J. Aublin, C. Bagatelas, G. Barbarino, B. Baret, S. Basegmez du Pree, A. Belias, E. Berbee, A. M. van den Berg, V. Bertin, V. van Beveren, S. Biagi, A. Biagioni, S. Bianucci, M. Billault, M. Bissinger, R. de Boer , et al. (240 additional authors not shown)

Abstract: KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The fir… ▽ More KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232-3386 m seawater depth is obtained. △ Less

Submitted 4 February, 2020; v1 submitted 6 June, 2019; originally announced June 2019.

Comments: 15 pages, 9 figures

Journal ref: Eur. Phys. J. C 80, 99 (2020)

An algorithm for the reconstruction of neutrino-induced showers in the ANTARES neutrino telescope

Authors: A. Albert, M. André, M. Anghinolfi, G. Anton, M. Ardid, J. -J. Aubert, T. Avgitas, B. Baret, J. Barrios-Martí, S. Basa, B. Belhorma, V. Bertin, S. Biagi, R. Bormuth, S. Bourret, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto, A. Capone, L. Caramete, J. Carr, S. Celli, R. Cherkaoui El Moursli , et al. (102 additional authors not shown)

Abstract: Muons created by $ν_μ$ charged current (CC) interactions in the water surrounding the ANTARES neutrino telescope have been almost exclusively used so far in searches for cosmic neutrino sources. Due to their long range, highly energetic muons inducing Cherenkov radiation in the water are reconstructed with dedicated algorithms that allow the determination of the parent neutrino direction with a me… ▽ More Muons created by $ν_μ$ charged current (CC) interactions in the water surrounding the ANTARES neutrino telescope have been almost exclusively used so far in searches for cosmic neutrino sources. Due to their long range, highly energetic muons inducing Cherenkov radiation in the water are reconstructed with dedicated algorithms that allow the determination of the parent neutrino direction with a median angular resolution of about \unit{0.4}{\degree} for an $E^{-2}$ neutrino spectrum. In this paper, an algorithm optimised for accurate reconstruction of energy and direction of shower events in the ANTARES detector is presented. Hadronic showers of electrically charged particles are produced by the disintegration of the nucleus both in CC and neutral current (NC) interactions of neutrinos in water. In addition, electromagnetic showers result from the CC interactions of electron neutrinos while the decay of a tau lepton produced in $ν_τ$ CC interactions will in most cases lead to either a hadronic or an electromagnetic shower. A shower can be approximated as a point source of photons. With the presented method, the shower position is reconstructed with a precision of about \unit{1}{\metre}, the neutrino direction is reconstructed with a median angular resolution between \unit{2}{\degree} and \unit{3}{\degree} in the energy range of \SIrange{1}{1000}{TeV}. In this energy interval, the uncertainty on the reconstructed neutrino energy is about \SIrange{5}{10}{\%}. The increase in the detector sensitivity due to the use of additional information from shower events in the searches for a cosmic neutrino flux is also presented. △ Less

Submitted 19 January, 2018; v1 submitted 11 August, 2017; originally announced August 2017.

Intrinsic limits on resolutions in muon- and electron-neutrino charged-current events in the KM3NeT/ORCA detector

Authors: S. Adrián-Martínez, M. Ageron, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, T. Avgitas, G. Barbarino, E. Barbarito, B. Baret, J. Barrios-Martí, A. Belias, E. Berbee, A. van den Berg, V. Bertin, S. Beurthey, V. van Beveren, N. Beverini, S. Biagi, A. Biagioni , et al. (228 additional authors not shown)

Abstract: Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA… ▽ More Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA detector are investigated. These processes include the composition of the hadronic fragmentation products, the subsequent particle propagation and the photon-sampling fraction of the detector. GEANT simulations of neutrino interactions in seawater produced by GENIE are used to study the effects in the 1 - 20 GeV range. It is found that fluctuations in the hadronic cascade in conjunction with the variation of the inelasticity y are most detrimental to the resolutions. The effect of limited photon sampling in the detector is of significantly less importance. These results will therefore also be applicable to similar detectors/media, such as those in ice. △ Less

Submitted 19 May, 2017; v1 submitted 29 November, 2016; originally announced December 2016.

Comments: 37 pages, 28 figures, JHEP published version

Journal ref: The KM3NeT collaboration, Adri{á}n-Mart{\'ı}nez, S., Ageron, M. et al. J. High Energ. Phys. (2017) 2017: 8

A new instrument for high statistics measurement of photomultiplier characteristics

Authors: C. Bozza, T. Chiarusi, M. Costa, F. Di Capua, V. Kulikovskiy, R. Mele, P. Migliozzi, C. M. Mollo, C. Pellegrino, G. Riccobene, D. Vivolo

Abstract: Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of astroparticle physics experiments, such as air, ice and water Cherenkov detectors. Small size PMTs ($\leq $ 3 inches diameter) show little sensitivity to the Earth m… ▽ More Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of astroparticle physics experiments, such as air, ice and water Cherenkov detectors. Small size PMTs ($\leq $ 3 inches diameter) show little sensitivity to the Earth magnetic field, small transit time, stable transit time spread; the price per photocathode area is less comparing to the one for the large area PMTs, typically used so far in such applications. Together with developments and reduced price of multichannel electronics, the use of PMTs of 3-inches or smaller diameter is a promising option even for nowadays large volume detectors. In this paper we report on the design and performance of a new instrument for mass characterisation of PMTs (from 1 inch to 3 inches size), capable to calibrate hundreds of PMTs per day and provide measurements of dark counts, signal amplitude, late-, delayed-, pre- and after-pulses, transit time and transit time spread. △ Less

Submitted 14 July, 2016; v1 submitted 13 April, 2016; originally announced April 2016.

Comments: 15 pages, 11 figures, 1 table, to be published in JINST

Letter of Intent for KM3NeT 2.0

Authors: S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. Anassontzis, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, T. Avgitas, G. Barbarino, E. Barbarito, B. Baret, J. Barrios-Martí, B. Belhorma, A. Belias, E. Berbee, A. van den Berg, V. Bertin, S. Beurthey, V. van Beveren, N. Beverini , et al. (222 additional authors not shown)

Abstract: The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect… ▽ More The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations. △ Less

Submitted 26 July, 2016; v1 submitted 27 January, 2016; originally announced January 2016.

Comments: 119 pages, published version, revised Eq. 6, 7

Journal ref: Journal of Physics G: Nuclear and Particle Physics, 43 (8), 084001, 2016

The prototype detection unit of the KM3NeT detector

Authors: KM3NeT Collaboration, S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, G. C. Androulakis, M. Anghinolfi, G. Anton, S. Anvar, M. Ardid, T. Avgitas, K. Balasi, H. Band, G. Barbarino, E. Barbarito, F. Barbato, B. Baret, S. Baron, J. Barrios, A. Belias, E. Berbee, A. M. van den Berg , et al. (224 additional authors not shown)

Abstract: A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt… ▽ More A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°. △ Less

Submitted 23 December, 2015; v1 submitted 6 October, 2015; originally announced October 2015.

Comments: Accepted for publication by EPJ C

Journal ref: Eur. Phys. J. C (2016) 76:54

Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype

Authors: S. Adrián-Martínez, S. Aiello, F. Ameli, M. Anghinolfi, M. Ardid, G. Barbarino, E. Barbarito, F. C. T. Barbato, N. Beverini, S. Biagi, A. Biagioni, B. Bouhadef, C. Bozza, G. Cacopardo, M. Calamai, C. Calí, D. Calvo, A. Capone, F. Caruso, A. Ceres, T. Chiarusi, M. Circella, R. Cocimano, R. Coniglione, M. Costa , et al. (79 additional authors not shown)

Abstract: The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italia… ▽ More The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site. △ Less

Submitted 28 January, 2016; v1 submitted 17 July, 2015; originally announced July 2015.

Comments: 12 pages, 17 figures

Time calibration with atmospheric muon tracks in the ANTARES neutrino telescope

Authors: S. Adrián-Martínez, A. Albert, M. André, G. Anton, M. Ardid, J. -J. Aubert, B. Baret, J. Barrios-Martí, S. Basa, V. Bertin, S. Biagi, C. Bogazzi, R. Bormuth, M. Bou-Cabo, M. C. Bouwhuis, R. Bruijn, J. Brunner, J. Busto, A. Capone, L. Caramete, J. Carr, T. Chiarusi, M. Circella, R. Coniglione, H. Costantini , et al. (105 additional authors not shown)

Abstract: The ANTARES experiment consists of an array of photomultipliers distributed along 12 lines and located deep underwater in the Mediterranean Sea. It searches for astrophysical neutrinos collecting the Cherenkov light induced by the charged particles, mainly muons, produced in neutrino interactions around the detector. Since at energies of $\sim$10 TeV the muon and the incident neutrino are almost c… ▽ More The ANTARES experiment consists of an array of photomultipliers distributed along 12 lines and located deep underwater in the Mediterranean Sea. It searches for astrophysical neutrinos collecting the Cherenkov light induced by the charged particles, mainly muons, produced in neutrino interactions around the detector. Since at energies of $\sim$10 TeV the muon and the incident neutrino are almost collinear, it is possible to use the ANTARES detector as a neutrino telescope and identify a source of neutrinos in the sky starting from a precise reconstruction of the muon trajectory. To get this result, the arrival times of the Cherenkov photons must be accurately measured. A to perform time calibrations with the precision required to have optimal performances of the instrument is described. The reconstructed tracks of the atmospheric muons in the ANTARES detector are used to determine the relative time offsets between photomultipliers. Currently, this method is used to obtain the time calibration constants for photomultipliers on different lines at a precision level of 0.5 ns. It has also been validated for calibrating photomultipliers on the same line, using a system of LEDs and laser light devices. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: Submitted to Astroparticle Physics (17 pages, 11 figures)

Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower

Authors: S. Aiello, F. Ameli, M. Anghinolfi, G. Barbarino, E. Barbarito, F. Barbato, N. Beverini, S. Biagi, B. Bouhadef, C. Bozza, G. Cacopardo, M. Calamai, C. Calì, A. Capone, F. Caruso, A. Ceres, T. Chiarusi, M. Circella, R. Cocimano, R. Coniglione, M. Costa, G. Cuttone, C. D'Amato, A. D'Amico, G. De Bonis , et al. (68 additional authors not shown)

Abstract: The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the… ▽ More The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent. △ Less

Submitted 3 December, 2014; v1 submitted 2 December, 2014; originally announced December 2014.

Comments: submitted to Astroparticle Physics

Journal ref: Astroparticle Physics 66 (2015) 1

A new generation photodetector for astroparticle physics: the VSiPMT

Authors: G. Barbarino, F. C. T. Barbato, L. Campajola, F. Canfora, R. de Asmundis, G. De Rosa, G. Fiorillo, P. Migliozzi, C. M. Mollo, B. Rossi, D. Vivolo

Abstract: The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design we proposed for a revolutionary photon detector. The main idea is to replace the classical dynode chain of a PMT with a SiPM (G-APD), the latter acting as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performance of the SiPM technology. The VSiPMT has many attracti… ▽ More The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design we proposed for a revolutionary photon detector. The main idea is to replace the classical dynode chain of a PMT with a SiPM (G-APD), the latter acting as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performance of the SiPM technology. The VSiPMT has many attractive features. In particular, a low power consumption and an excellent photon counting capability. To prove the feasibility of the idea we first tested the performance of a special non-windowed SiPM by Hamamatsu (MPPC) as electron detector and current amplifier. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes. In this work, we present the results of a full characterization of the VSiPMT prototype. △ Less

Submitted 17 July, 2014; v1 submitted 10 July, 2014; originally announced July 2014.

Deep sea tests of a prototype of the KM3NeT digital optical module

Authors: S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, M. Anghinolfi, G. Anton, S. Anvar, M. Ardid, R. de Asmundis, K. Balasi, H. Band, G. Barbarino, E. Barbarito, F. Barbato, B. Baret, S. Baron, A. Belias, E. Berbee, A. M. van den Berg, A. Berkien, V. Bertin, S. Beurthey , et al. (225 additional authors not shown)

Abstract: The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th… ▽ More The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions. △ Less

Submitted 16 May, 2014; v1 submitted 5 May, 2014; originally announced May 2014.

Evidence for $ν_μ\to ν_τ$ appearance in the CNGS neutrino beam with the OPERA experiment

Authors: N. Agafonova, A. Aleksandrov, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, T. Asada, D. Autiero, A. Ben Dhahbi, A. Badertscher, D. Bender, A. Bertolin, C. Bozza, R. Brugnera, F. Brunet, G. Brunetti, A. Buonaura, S. Buontempo, B. Buettner, L. Chaussard, M. Chernyavsky, V. Chiarella, A. Chukanov, L. Consiglio, N. D'Ambrosio , et al. (146 additional authors not shown)

Abstract: The OPERA experiment is designed to search for $ν_μ \rightarrow ν_τ$ oscillations in appearance mode i.e. through the direct observation of the $τ$ lepton in $ν_τ$ charged current interactions. The experiment has taken data for five years, since 2008, with the CERN Neutrino to Gran Sasso beam. Previously, two $ν_τ$ candidates with a $τ$ decaying into hadrons were observed in a sub-sample of data o… ▽ More The OPERA experiment is designed to search for $ν_μ \rightarrow ν_τ$ oscillations in appearance mode i.e. through the direct observation of the $τ$ lepton in $ν_τ$ charged current interactions. The experiment has taken data for five years, since 2008, with the CERN Neutrino to Gran Sasso beam. Previously, two $ν_τ$ candidates with a $τ$ decaying into hadrons were observed in a sub-sample of data of the 2008-2011 runs. Here we report the observation of a third $ν_τ$ candidate in the $τ^-\toμ^-$ decay channel coming from the analysis of a sub-sample of the 2012 run. Taking into account the estimated background, the absence of $ν_μ \rightarrow ν_τ$ oscillations is excluded at the 3.4 $σ$ level. △ Less

Submitted 9 January, 2014; originally announced January 2014.

Comments: 9 pages, 5 figures, 1 tables

Journal ref: Phys. Rev. D 89, 051102 (2014)

New results on $ν_μ\to ν_τ$ appearance with the OPERA experiment in the CNGS beam

Authors: OPERA Collaboration, N. Agafonova, A. Aleksandrov, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, T. Asada, D. Autiero, A. Badertscher, A. Ben Dhahbi, D. Bender, A. Bertolin, C. Bozza, R. Brugnera, G. Brunetti, B. Buettner, S. Buontempo, L. Chaussard, M. Chernyavskiy, V. Chiarella, A. Chukanov, L. Consiglio, N. D'Ambrosio, P. Del Amo Sanchez , et al. (145 additional authors not shown)

Abstract: The OPERA neutrino experiment is designed to perform the first observation of neutrino oscillations in direct appearance mode in the $ν_μ\to ν_τ$ channel, via the detection of the $τ$-leptons created in charged current $ν_τ$ interactions. The detector, located in the underground Gran Sasso Laboratory, consists of an emulsion/lead target with an average mass of about 1.2 kt, complemented by electro… ▽ More The OPERA neutrino experiment is designed to perform the first observation of neutrino oscillations in direct appearance mode in the $ν_μ\to ν_τ$ channel, via the detection of the $τ$-leptons created in charged current $ν_τ$ interactions. The detector, located in the underground Gran Sasso Laboratory, consists of an emulsion/lead target with an average mass of about 1.2 kt, complemented by electronic detectors. It is exposed to the CERN Neutrinos to Gran Sasso beam, with a baseline of 730 km and a mean energy of 17 GeV. The observation of the first $ν_τ$ candidate event and the analysis of the 2008-2009 neutrino sample have been reported in previous publications. This work describes substantial improvements in the analysis and in the evaluation of the detection efficiencies and backgrounds using new simulation tools. The analysis is extended to a sub-sample of 2010 and 2011 data, resulting from an electronic detector-based pre-selection, in which an additional $ν_τ$ candidate has been observed. The significance of the two events in terms of a $ν_μ\to ν_τ$ oscillation signal is of 2.40 $σ$. △ Less

Submitted 12 August, 2013; originally announced August 2013.

Comments: 33 pages, 12 figures, 5 tables. Prepared for submission to JHEP

The EUROnu Project

Authors: T. R. Edgecock, O. Caretta, T. Davenne, C. Densham, M. Fitton, D. Kelliher, P. Loveridge, S. Machida, C. Prior, C. Rogers, M. Rooney, J. Thomason, D. Wilcox, E. Wildner, I. Efthymiopoulos, R. Garoby, S. Gilardoni, C. Hansen, E. Benedetto, E. Jensen, A. Kosmicki, M. Martini, J. Osborne, G. Prior, T. Stora , et al. (146 additional authors not shown)

Abstract: The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the… ▽ More The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive. △ Less

Submitted 17 May, 2013; originally announced May 2013.

Comments: Results from the Framework Programme 7 project EUROnu, which studied three possible accelerator facilities for future high intensity neutrino oscillation facilities in Europe

Journal ref: Phys. Rev. ST Accel. Beams 16 021002 (2013)

Measurement of the neutrino velocity with the OPERA detector in the CNGS beam using the 2012 dedicated data

Authors: The OPERA Collaboration, T. Adam, N. Agafonova, A. Aleksandrov, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, D. Autiero, A. Badertscher, A. Ben Dhahbi, M. Beretta, A. Bertolin, C. Bozza, T. Brugière, R. Brugnera, F. Brunet, G. Brunetti, B. Buettner, S. Buontempo, B. Carlus, F. Cavanna, A. Cazes, L. Chaussard, M. Chernyavsky , et al. (146 additional authors not shown)

Abstract: In spring 2012 CERN provided two weeks of a short bunch proton beam dedicated to the neutrino velocity measurement over a distance of 730 km. The OPERA neutrino experiment at the underground Gran Sasso Laboratory used an upgraded setup compared to the 2011 measurements, improving the measurement time accuracy. An independent timing system based on the Resistive Plate Chambers was exploited providi… ▽ More In spring 2012 CERN provided two weeks of a short bunch proton beam dedicated to the neutrino velocity measurement over a distance of 730 km. The OPERA neutrino experiment at the underground Gran Sasso Laboratory used an upgraded setup compared to the 2011 measurements, improving the measurement time accuracy. An independent timing system based on the Resistive Plate Chambers was exploited providing a time accuracy of $\sim$1 ns. Neutrino and anti-neutrino contributions were separated using the information provided by the OPERA magnetic spectrometers. The new analysis profited from the precision geodesy measurements of the neutrino baseline and of the CNGS/LNGS clock synchronization. The neutrino arrival time with respect to the one computed assuming the speed of light in vacuum is found to be $δt_ν\equiv TOF_c - TOF_ν= (0.6 \pm 0.4\ (stat.) \pm 3.0\ (syst.))$ ns and $δt_{\barν} \equiv TOF_c - TOF_{\barν} = (1.7 \pm 1.4\ (stat.) \pm 3.1\ (syst.))$ ns for $ν_μ$ and $\barν_μ$, respectively. This corresponds to a limit on the muon neutrino velocity with respect to the speed of light of $-1.8 \times 10^{-6} < (v_ν-c)/c < 2.3 \times 10^{-6}$ at 90% C.L. This new measurement confirms with higher accuracy the revised OPERA result. △ Less

Submitted 17 December, 2012; v1 submitted 6 December, 2012; originally announced December 2012.

Comments: 14 pages, 4 figures

Detectors and flux instrumentation for future neutrino facilities

Authors: T. Abe, H. Aihara, C. Andreopoulos, A. Ankowski, A. Badertscher, G. Battistoni, A. Blondel, J. Bouchez, A. Bross, A. Bueno, L. Camilleri, J. E. Campagne, A. Cazes, A. Cervera-Villanueva, G. De Lellis, F. Di Capua, M. Ellis, A. Ereditato, L. S. Esposito, C. Fukushima, E. Gschwendtner, J. J. Gomez-Cadenas, M. Iwasaki, K. Kaneyuki, Y. Karadzhov , et al. (44 additional authors not shown)

Abstract: This report summarises the conclusions from the detector group of the International Sco** Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows: 1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility. 2. There are a number… ▽ More This report summarises the conclusions from the detector group of the International Sco** Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows: 1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility. 2. There are a number of possibilities for either a Beta Beam or Super Beam (SB) medium energy facility between 1-5 GeV. These include a totally active scintillating detector (TASD), a liquid argon TPC or a water Cherenkov detector. 3. A 100 kton magnetized iron neutrino detector (MIND) is the baseline to detect the wrong sign muon final states (golden channel) at a high energy (20-50 GeV) neutrino factory from muon decay. A 10 kton hybrid neutrino magnetic emulsion cloud chamber detector for wrong sign tau detection (silver channel) is a possible complement to MIND, if one needs to resolve degeneracies that appear in the $δ$-$θ_{13}$ parameter space. △ Less

Submitted 26 December, 2007; originally announced December 2007.

Comments: Detector report of the International Sco** Study of a future Neutrino Factory and Super-Beam facility, 86 pages, 49 figures

Report number: RAL-TR-2007-24

Journal ref: JINST 4:T05001,2009

Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

Authors: L. Arrabito, C. Bozza, S. Buontempo, L. Consiglio, M. Cozzi, N. D'Ambrosio, G. De Lellis, M. De Serio, F. Di Capua, D. Di Ferdinando, N. Di Marco, A. Ereditato, L. S. Esposito, R. A. Fini, G. Giacomelli, M. Giorgini, G. Grella, M. Ieva, J. Janicsko Csathy, F. Juget, I. Kreslo, I. Laktineh, K. Manai, G. Mandrioli, A. Marotta , et al. (22 additional authors not shown)

Abstract: The OPERA experiment, designed to conclusively prove the existence of $\rm ν_μ\to ν_τ$ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of $\rm ν_τ$'s in the CNGS $\rm ν_μ$ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to rec… ▽ More The OPERA experiment, designed to conclusively prove the existence of $\rm ν_μ\to ν_τ$ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of $\rm ν_τ$'s in the CNGS $\rm ν_μ$ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of 20 cm^2 / h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA. △ Less

Submitted 22 May, 2007; originally announced May 2007.

Comments: 13 pages, 10 figures

Journal ref: JINST 2:P05004,2007

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

Authors: G. De Lellis, S. Buontempo, F. Di Capua, A. Marotta, P. Migliozzi, Y. Petukhov, C. Pistillo, A. Russo, L. Scotto Lavina, P. Strolin, V. Tioukov, A. Ariga, N. Naganawa, T. Toshito, Y. Furusawa, N. Yasuda

Abstract: Beams of Carbon nuclei are used or planned to be used in various centers for cancer treatment around the world because of their therapeutic advantages over proton beams. The knowledge of the fragmentation of Carbon nuclei when they interact with the human body is important to evaluate the spatial profile of their energy deposition in the tissues, hence the damage to the tissues neighboring the t… ▽ More Beams of Carbon nuclei are used or planned to be used in various centers for cancer treatment around the world because of their therapeutic advantages over proton beams. The knowledge of the fragmentation of Carbon nuclei when they interact with the human body is important to evaluate the spatial profile of their energy deposition in the tissues, hence the damage to the tissues neighboring the tumor. In this respect, the identification of the fragmentation products is a key element. We present in this paper the charge measurement of about 3000 fragments produced by the interaction of $^{12}$C nuclei with an energy of 400 MeV/nucleon in a detector simulating the density of the human body. The nuclear emulsion technique is used, by means of the so-called Emulsion Cloud Chamber. In order to achieve the large dynamical range required for the charge measurement, the recently developed techniques of the emulsion controlled fading are used. The nuclear emulsions are inspected using fast automated microscopes recently developed. A charge assignment efficiency of more than 99% is achieved. The separation of Hydrogen, Helium, Lithium, Berillium, Boron and Carbon can be achieved at two standard deviations or considerably more, according to the track length available for the measurement. △ Less

Submitted 8 June, 2007; v1 submitted 7 March, 2007; originally announced March 2007.

Comments: 15 pages, 8 figures

Journal ref: JINST 2:P06004,2007

Electron/pion separation with an Emulsion Cloud Chamber by using a Neural Network

Authors: L. Arrabito, D. Autiero, C. Bozza, S. Buontempo, Y. Caffari, L. Consiglio, M. Cozzi, N. D'Ambrosio, G. De Lellis, M. De Serio, F. Di Capua, D. Di Ferdinando, N. Di Marco, A. Ereditato, L. S. Esposito, S. Gagnebin, G. Giacomelli, M. Giorgini, G. Grella, M. Hauger, M. Ieva, J. Janicsko Csathy, F. Juget, I. Kreslo, I. Laktineh , et al. (24 additional authors not shown)

Abstract: We have studied the performance of a new algorithm for electron/pion separation in an Emulsion Cloud Chamber (ECC) made of lead and nuclear emulsion films. The software for separation consists of two parts: a shower reconstruction algorithm and a Neural Network that assigns to each reconstructed shower the probability to be an electron or a pion. The performance has been studied for the ECC of t… ▽ More We have studied the performance of a new algorithm for electron/pion separation in an Emulsion Cloud Chamber (ECC) made of lead and nuclear emulsion films. The software for separation consists of two parts: a shower reconstruction algorithm and a Neural Network that assigns to each reconstructed shower the probability to be an electron or a pion. The performance has been studied for the ECC of the OPERA experiment [1]. The $e/π$ separation algorithm has been optimized by using a detailed Monte Carlo simulation of the ECC and tested on real data taken at CERN (pion beams) and at DESY (electron beams). The algorithm allows to achieve a 90% electron identification efficiency with a pion misidentification smaller than 1% for energies higher than 2 GeV. △ Less

Submitted 17 January, 2007; originally announced January 2007.

Journal ref: JINST 2:P02001,2007

Hardware performance of a scanning system for high speed analysis of nuclear emulsions

Authors: L. Arrabito, E. Barbuto, C. Bozza, S. Buontempo, L. Consiglio, D. Coppola, M. Cozzi, J. Damet, N. D'Ambrosio, G. De Lellis, M. De Serio, F. Di Capua, D. Di Ferdinando, N. Di Marco, L. S. Esposito, G. Giacomelli, G. Grella, M. Hauger, F. Juget, I. Kreslo, M. Giorgini, M. Ieva, I. Laktineh, K. Manai, G. Mandrioli , et al. (23 additional authors not shown)

Abstract: The use of nuclear emulsions in very large physics experiments is now possible thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. In this paper the hardware performances of the European Scanning System (ESS) are described. The ESS is a very fast automatic system developed for the mass scanning of the emulsions of the… ▽ More The use of nuclear emulsions in very large physics experiments is now possible thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. In this paper the hardware performances of the European Scanning System (ESS) are described. The ESS is a very fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of about 20 cm^2/h in an emulsion volume of 44 micron thickness. △ Less

Submitted 17 July, 2006; v1 submitted 6 April, 2006; originally announced April 2006.

Comments: 16 pages, 12 figures, Accepted by Nucl. Instrum. Meth. A

Journal ref: Nucl.Instrum.Meth.A568:578-587,2006

Neutrino oscillation studies with laser-driven beam dump facilities

Authors: S. V. Bulanov, T. Esirkepov, P. Migliozzi, F. Pegoraro, T. Tajima, F. Terranova

Abstract: A new mechanism is suggested for efficient proton acceleration in the GeV energy range; applications to non-conventional high intensity proton drivers and, hence, to low-energy (10-200 MeV) neutrino sources are discussed. In particular we investigate possible uses to explore subdominant $\barν_μ\to \barν_e$ oscillations at the atmospheric scale and their CP conjugate. We emphasize the opportunit… ▽ More A new mechanism is suggested for efficient proton acceleration in the GeV energy range; applications to non-conventional high intensity proton drivers and, hence, to low-energy (10-200 MeV) neutrino sources are discussed. In particular we investigate possible uses to explore subdominant $\barν_μ\to \barν_e$ oscillations at the atmospheric scale and their CP conjugate. We emphasize the opportunity to develop these facilities in conjunction with projects for inertial confined nuclear fusion and neutron spallation sources. △ Less

Submitted 2 December, 2004; v1 submitted 22 April, 2004; originally announced April 2004.

Comments: 30 pages, 9 figures, minor changes, version to appear in Nucl.Instrum.Meth.A

Report number: LNF-04/07

Journal ref: Nucl.Instrum.Meth.A540:25-41,2005