-
Greater than five-order-of-magnitude post-compression temporal contrast improvement with an ionization plasma grating
Authors:
Matthew R. Edwards,
Nicholas M. Fasano,
Andreas M. Giakas,
Michelle M. Wang,
Jesse Griff-McMahon,
Anatoli Morozov,
Victor M. Perez-Ramirez,
Nuno Lemos,
Pierre Michel,
Julia M. Mikhailova
Abstract:
High-intensity lasers require suppression of prepulses and other non-ideal temporal structure to avoid target disruption before the arrival of the main pulse. To address this, we demonstrate that ionization gratings act as a controllable optical switch for high-power light with a temporal contrast improvement of at least $3\times10^5$ and a switching time less than 500 fs. We also show that a grat…
▽ More
High-intensity lasers require suppression of prepulses and other non-ideal temporal structure to avoid target disruption before the arrival of the main pulse. To address this, we demonstrate that ionization gratings act as a controllable optical switch for high-power light with a temporal contrast improvement of at least $3\times10^5$ and a switching time less than 500 fs. We also show that a grating system can run for hours at 10 Hz without degradation. The contrast improvement from an ionization grating compares favorably to that achievable with plasma mirrors.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Photochemically-induced acousto-optics in gases
Authors:
Pierre Michel,
Livia Lancia,
Albertine Oudin,
Eugene Kur,
Caterina Riconda,
Ke Ou,
Victor M. Perez-Ramirez,
** Lee,
Matthew R. Edwards
Abstract:
Acousto-optics consists of launching acoustic waves in a medium (usually a crystal) in order to modulate its refractive index and create a tunable optical grating. In this article, we present the theoretical basis of a new scheme to generate acousto-optics in a gas, where the acoustic waves are initiated by the localized absorption (and thus gas heating) of spatially-modulated UV light, as was dem…
▽ More
Acousto-optics consists of launching acoustic waves in a medium (usually a crystal) in order to modulate its refractive index and create a tunable optical grating. In this article, we present the theoretical basis of a new scheme to generate acousto-optics in a gas, where the acoustic waves are initiated by the localized absorption (and thus gas heating) of spatially-modulated UV light, as was demonstrated in Y. Michine and H. Yoneda, Commun. Phys. 3, 24 (2020). We identify the chemical reactions initiated by the absorption of UV light via the photodissociation of ozone molecules present in the gas, and calculate the resulting temperature increase in the gas as a function of space and time. Solving the Euler fluid equations shows that the modulated, isochoric heating initiates a mixed acoustic/entropy wave in the gas, whose high-amplitude density (and thus refractive index) modulation can be used to manipulate a high-power laser. We calculate that diffraction efficiencies near 100% can be obtained using only a few millimeters of gas containing a few percent ozone fraction at room temperature, with UV fluences of less than 100 mJ/cm2, consistent with the experimental measurements. Our analysis suggests possible ways to optimize the diffraction efficiency by changing the buffer gas composition. Gases have optics damage thresholds two to three orders of magnitude beyond those of solids; these optical elements should therefore be able to manipulate kJ-class lasers.
△ Less
Submitted 16 June, 2024; v1 submitted 7 February, 2024;
originally announced February 2024.
-
The Raman gap and collisional absorption
Authors:
Ido Barth,
Pierre Michel
Abstract:
One of the long-standing puzzles observed in many laser-plasma experiments is the gap in the Raman backscattering spectrum. This gap is characterized by the absence of backscattered light between some critical wavelength and twice the incident laser wavelength. The latter is associated with the absolute Raman instability from the quarter-critical density surface. Supported by particle-in-cell (PIC…
▽ More
One of the long-standing puzzles observed in many laser-plasma experiments is the gap in the Raman backscattering spectrum. This gap is characterized by the absence of backscattered light between some critical wavelength and twice the incident laser wavelength. The latter is associated with the absolute Raman instability from the quarter-critical density surface. Supported by particle-in-cell (PIC) simulations, it is suggested that the gap can result from the collisional dam** of the backscattered light. A linear analysis of the competition between the Raman growth rate and the dam** rate in a non-homogenous plasma predicts the gap's existence and width as a function of the system's parameters. The theory is compared with the PIC simulations and past experiments.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Planetary Exploration Horizon 2061 Report, Chapter 3: From science questions to Solar System exploration
Authors:
Véronique Dehant,
Michel Blanc,
Steve Mackwell,
Krista M. Soderlund,
Pierre Beck,
Emma Bunce,
Sébastien Charnoz,
Bernard Foing,
Valerio Filice,
Leigh N. Fletcher,
François Forget,
Léa Griton,
Heidi Hammel,
Dennis Höning,
Takeshi Imamura,
Caitriona Jackman,
Yohai Kaspi,
Oleg Korablev,
Jérémy Leconte,
Emmanuel Lellouch,
Bernard Marty,
Nicolas Mangold,
Patrick Michel,
Alessandro Morbidelli,
Olivier Mousis
, et al. (9 additional authors not shown)
Abstract:
This chapter of the Planetary Exploration Horizon 2061 Report reviews the way the six key questions about planetary systems, from their origins to the way they work and their habitability, identified in chapter 1, can be addressed by means of solar system exploration, and how one can find partial answers to these six questions by flying to the different provinces to the solar system: terrestrial p…
▽ More
This chapter of the Planetary Exploration Horizon 2061 Report reviews the way the six key questions about planetary systems, from their origins to the way they work and their habitability, identified in chapter 1, can be addressed by means of solar system exploration, and how one can find partial answers to these six questions by flying to the different provinces to the solar system: terrestrial planets, giant planets, small bodies, and up to its interface with the local interstellar medium. It derives from this analysis a synthetic description of the most important space observations to be performed at the different solar system objects by future planetary exploration missions. These observation requirements illustrate the diversity of measurement techniques to be used as well as the diversity of destinations where these observations must be made. They constitute the base for the identification of the future planetary missions we need to fly by 2061, which are described in chapter 4. Q1- How well do we understand the diversity of planetary systems objects? Q2- How well do we understand the diversity of planetary system architectures? Q3- What are the origins and formation scenarios for planetary systems? Q4- How do planetary systems work? Q5- Do planetary systems host potential habitats? Q6- Where and how to search for life?
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
The application of encoder-decoder neural networks in high accuracy and efficiency slit-scan emittance measurements
Authors:
S. Ma,
A. Arnold,
P. Michel,
P. Murcek,
A. Ryzhov,
J. Schaber,
R. Steinbruck,
P. Evtushenko,
J. Teichert,
W. Hillert,
R. Xiang,
J. Zhu
Abstract:
A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average current and high brightness for user operation since 2018. The speed of emittance measurement at the SRF gun beamline can be increased by improving the slit-scan syst…
▽ More
A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average current and high brightness for user operation since 2018. The speed of emittance measurement at the SRF gun beamline can be increased by improving the slit-scan system, thus the measurement time for one phase space map** can be shortened from about 15 minutes to 90 seconds. A parallel algorithm and machine learning have been used to reduce the beamlet image noise. In order to estimate the uncertainty in the calculation of normalized emittance, we analyze the main error contributions such as slit position uncertainty, image noise, space charge effects and energy measurement inaccuracy.
△ Less
Submitted 13 September, 2022; v1 submitted 19 July, 2022;
originally announced July 2022.
-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Global Symmetries of the Kepler Problem
Authors:
Joanna Gonera,
Piotr Kosinski,
Patryk Michel
Abstract:
The global symmetry transformations generated by Runge-Lenz vector of twodimensional Kepler problem are explicitly described. They are given in terms of SU(2) left group multiplication with group elements being suitably parametrized by phase space points. The resulting non-linear action of SU(2) on the phase space is characterized in terms of the theory of nonlinear realizations developed in Phys.…
▽ More
The global symmetry transformations generated by Runge-Lenz vector of twodimensional Kepler problem are explicitly described. They are given in terms of SU(2) left group multiplication with group elements being suitably parametrized by phase space points. The resulting non-linear action of SU(2) on the phase space is characterized in terms of the theory of nonlinear realizations developed in Phys. Rev. 177 (1969) 2239.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
Predominant Contribution of Direct Laser Acceleration to High-Energy Electron Spectra in a Low-Density Self-Modulated Laser Wakefield Accelerator
Authors:
P. M. King,
K. Miller,
N. Lemos,
J. L. Shaw,
B. F. Kraus,
M. Thibodeau,
B. M. Hegelich,
J. Hinojosa,
P. Michel,
C. Joshi,
K. A. Marsh,
W. Mori,
A. Pak,
A. G. R. Thomas,
F. Albert
Abstract:
The two-temperature relativistic electron spectrum from a low-density ($3\times10^{17}$~cm$^{-3}$) self-modulated laser wakefield accelerator (SM-LWFA) is observed to transition between temperatures of $19\pm0.65$ and $46\pm2.45$ MeV at an electron energy of about 100 MeV. When the electrons are dispersed orthogonally to the laser polarization, their spectrum above 60 MeV shows a forking structure…
▽ More
The two-temperature relativistic electron spectrum from a low-density ($3\times10^{17}$~cm$^{-3}$) self-modulated laser wakefield accelerator (SM-LWFA) is observed to transition between temperatures of $19\pm0.65$ and $46\pm2.45$ MeV at an electron energy of about 100 MeV. When the electrons are dispersed orthogonally to the laser polarization, their spectrum above 60 MeV shows a forking structure characteristic of direct laser acceleration (DLA). Both the two-temperature distribution and the forking structure are reproduced in a quasi-3D \textsc{Osiris} simulation of the interaction of the 1-ps, moderate-amplitude ($a_{0}=2.7$) laser pulse with the low-density plasma. Particle tracking shows that while the SM-LWFA mechanism dominates below 40 MeV, the highest-energy ($>60$ MeV) electrons gain most of their energy through DLA. By separating the simulated electric fields into modes, the DLA-dominated electrons are shown to lose significant energy to the longitudinal laser field from the tight focusing geometry, resulting in a more accurate measure of net DLA energy gain than previously possible.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Nonlinear Polarization Transfer and Control of Two Laser Beams Overlap** in a Uniform Nonlinear Medium
Authors:
Eugene Kur,
Malcolm Lazarow,
Jonathan S. Wurtele,
Pierre Michel
Abstract:
A scheme for polarization control using two laser beams in a non-linear optical medium is studied using both co- and counter-propagating beam geometries. In particular, we show that under certain conditions it is possible for two laser beams to exchange their polarization states. A model accounting for a more realistic, 2D propagation geometry is presented. The 2D model produces drastically differ…
▽ More
A scheme for polarization control using two laser beams in a non-linear optical medium is studied using both co- and counter-propagating beam geometries. In particular, we show that under certain conditions it is possible for two laser beams to exchange their polarization states. A model accounting for a more realistic, 2D propagation geometry is presented. The 2D model produces drastically different results (compared to the 1D propagation geometry), creating difficulties for implementing polarization control in a realistic setting. A proposal for overcoming these difficulties by reducing the non-linear optical medium to a thin slab is presented.
△ Less
Submitted 13 November, 2020; v1 submitted 10 November, 2020;
originally announced November 2020.
-
Laser-Plasma Interactions Enabled by Emerging Technologies
Authors:
J. P. Palastro,
F. Albert,
B. Albright,
T. M. Antonsen Jr.,
A. Arefiev,
J. Bates,
R. Berger,
J. Bromage,
M. Campbell,
T. Chapman,
E. Chowdhury,
A. Colaïtis,
C. Dorrer,
E. Esarey,
F. Fiúza,
N. Fisch,
R. Follett,
D. Froula,
S. Glenzer,
D. Gordon,
D. Haberberger,
B. M. Hegelich,
T. Jones,
D. Kaganovich,
K. Krushelnick
, et al. (29 additional authors not shown)
Abstract:
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
△ Less
Submitted 30 April, 2019;
originally announced April 2019.
-
Effect of Laser-Plasma Interactions on Inertial Fusion Hydrodynamics
Authors:
D. J. Strozzi,
D. S. Bailey,
P. Michel,
L. Divol,
S. M. Sepke,
G. D. Kerbel,
C. A. Thomas,
J. E. Ralph,
J. D. Moody,
M. B. Schneider
Abstract:
The effects of laser-plasma interactions (LPI) on the dynamics of inertial confinement fusion hohlraums is investigated via a new approach that self-consistently couples reduced LPI models into radiation-hydrodynamics numerical codes. The interplay between hydrodynamics and LPI -- specifically stimulated Raman scatter (SRS) and crossed-beam energy transfer (CBET) -- mostly occurs via momentum and…
▽ More
The effects of laser-plasma interactions (LPI) on the dynamics of inertial confinement fusion hohlraums is investigated via a new approach that self-consistently couples reduced LPI models into radiation-hydrodynamics numerical codes. The interplay between hydrodynamics and LPI -- specifically stimulated Raman scatter (SRS) and crossed-beam energy transfer (CBET) -- mostly occurs via momentum and energy deposition into Langmuir and ion acoustic waves. This spatially redistributes energy coupling to the target, which affects the background plasma conditions and thus modifies laser propagation. This model shows reduced CBET, and significant laser energy depletion by Langmuir waves, which reduce the discrepancy between modeling and data from hohlraum experiments on wall x-ray emission and capsule implosion shape.
△ Less
Submitted 29 December, 2016; v1 submitted 21 July, 2016;
originally announced July 2016.
-
Low-speed Impact Simulations into Regolith in Support of Asteroid Sampling Mechanism Design I.: Comparison with 1-g Experiments
Authors:
Stephen R. Schwartz,
Patrick Michel,
Derek C. Richardson,
Hajime Yano
Abstract:
This study is carried out in the framework of sample-return missions to asteroids that use a low-speed projectile as the primary component of its sampling mechanism (e.g., JAXA's Hayabusa and Hayabusa2 missions). We perform numerical simulations of such impacts into granular materials using different projectile shapes under Earth's gravity. We then compare the amounts of ejected mass obtained in o…
▽ More
This study is carried out in the framework of sample-return missions to asteroids that use a low-speed projectile as the primary component of its sampling mechanism (e.g., JAXA's Hayabusa and Hayabusa2 missions). We perform numerical simulations of such impacts into granular materials using different projectile shapes under Earth's gravity. We then compare the amounts of ejected mass obtained in our simulations against what was found in experiments that used similar setups, which allows us to validate our numerical approach. For the targets, we consider 2 different monodisperse grain-diameter sizes: 5 mm and 3 mm. The impact speed of the projectile is 11 m s$^{-1}$ directed downward, perpendicular to the surface of the targets. Using an implementation of the soft-sphere discrete element method (SSDEM) in the $N$-Body gravity tree code PKDGRAV, previously validated in the context of low-speed impacts into sintered glass bead agglomerates, we find a noticeable dependence of the amount of ejected mass on the projectile shape. As found in experiments, in the case of the larger target grain size (5 mm), a conically shaped projectile ejects a greater amount of mass than do projectiles of other shapes, including disks and spheres. We then find that numerically the results are sensitive to the normal coefficient of restitution of the grains, especially for impacts into targets comprised of smaller grains (3 mm). We also find that static friction plays a more important role for impacts into targets comprised of the larger grains. As a preliminary demonstration, one of these considered setups is simulated in a microgravity environment. As expected, a reduction in gravity increases both the amount of ejected mass and the timescale of the impact process. Our methodology is also adaptable to the conditions of sampling mechanisms included in specific mission designs.
△ Less
Submitted 8 August, 2014;
originally announced August 2014.
-
Numerical simulations of granular dynamics. I. Hard-sphere discrete element method and tests
Authors:
Derek C. Richardson,
Kevin J. Walsh,
Naomi Murdoch,
Patrick Michel
Abstract:
We present a new particle-based (discrete element) numerical method for the simulation of granular dynamics, with application to motions of particles on small solar system body and planetary surfaces. The method employs the parallel N-body tree code pkdgrav to search for collisions and compute particle trajectories. Collisions are treated as instantaneous point-contact events between rigid spheres…
▽ More
We present a new particle-based (discrete element) numerical method for the simulation of granular dynamics, with application to motions of particles on small solar system body and planetary surfaces. The method employs the parallel N-body tree code pkdgrav to search for collisions and compute particle trajectories. Collisions are treated as instantaneous point-contact events between rigid spheres. Particle confinement is achieved by combining arbitrary combinations of four provided wall primitives, namely infinite plane, finite disk, infinite cylinder, and finite cylinder, and degenerate cases of these. Various wall movements, including translation, oscillation, and rotation, are supported. We provide full derivations of collision prediction and resolution equations for all geometries and motions. Several tests of the method are described, including a model granular "atmosphere" that achieves correct energy equipartition, and a series of tumbler simulations that show the expected transition from tumbling to centrifuging as a function of rotation rate.
△ Less
Submitted 11 June, 2013;
originally announced June 2013.
-
Granular Shear Flow in Varying Gravitational Environments
Authors:
N. Murdoch,
B. Rozitis,
S. F. Green,
T-L de Lophem,
P. Michel,
W. Losert
Abstract:
Despite their very low surface gravities, asteroids exhibit a number of different geological processes involving granular matter. Understanding the response of this granular material subject to external forces in microgravity conditions is vital to the design of a successful asteroid sub-surface sampling mechanism, and in the interpretation of the fascinating geology on an asteroid. We have design…
▽ More
Despite their very low surface gravities, asteroids exhibit a number of different geological processes involving granular matter. Understanding the response of this granular material subject to external forces in microgravity conditions is vital to the design of a successful asteroid sub-surface sampling mechanism, and in the interpretation of the fascinating geology on an asteroid. We have designed and flown a Taylor-Couette shear cell to investigate granular flow due to rotational shear forces under the conditions of parabolic flight microgravity. The experiments occur under weak compression. First, we present the technical details of the experimental design with particular emphasis on how the equipment has been specifically designed for the parabolic flight environment. Then, we investigate how a steady state granular flow induced by rotational shear forces differs in varying gravitational environments. We find that the effect of constant shearing on the granular material, in a direction perpendicular to the effective acceleration, does not seem to be strongly influenced by gravity. This means that shear bands can form in the presence of a weak gravitational field just as on Earth.
△ Less
Submitted 7 June, 2013;
originally announced June 2013.
-
Granular Convection in Microgravity
Authors:
N. Murdoch,
B. Rozitis,
K. Nordstrom,
S. F. Green,
P. Michel,
T. -L. de Lophem,
W. Losert
Abstract:
We investigate the role of gravity on convection in a dense granular shear flow. Using a microgravity modified Taylor-Couette shear cell under the conditions of parabolic flight microgravity, we demonstrate experimentally that secondary, convective-like flows in a sheared granular material are close to zero in microgravity and enhanced under high-gravity conditions, though the primary flow fields…
▽ More
We investigate the role of gravity on convection in a dense granular shear flow. Using a microgravity modified Taylor-Couette shear cell under the conditions of parabolic flight microgravity, we demonstrate experimentally that secondary, convective-like flows in a sheared granular material are close to zero in microgravity and enhanced under high-gravity conditions, though the primary flow fields are unaffected by gravity. We suggest that gravity tunes the frictional particle-particle and particle-wall interactions, which have been proposed to drive the secondary flow. In addition, the degree of plastic deformation increases with increasing gravitational forces, supporting the notion that friction is the ultimate cause.
△ Less
Submitted 7 June, 2013;
originally announced June 2013.
-
Simulating regoliths in microgravity
Authors:
N. Murdoch,
B. Rozitis,
S. F. Green,
P. Michel,
T-L. de Lophem,
W. Losert
Abstract:
Despite their very low surface gravities, the surfaces of asteroids and comets are covered by granular materials - regolith - that can range from a fine dust to a gravel-like structure of varying depths. Understanding the dynamics of granular materials is, therefore, vital for the interpretation of the surface geology of these small bodies and is also critical for the design and/or operations of a…
▽ More
Despite their very low surface gravities, the surfaces of asteroids and comets are covered by granular materials - regolith - that can range from a fine dust to a gravel-like structure of varying depths. Understanding the dynamics of granular materials is, therefore, vital for the interpretation of the surface geology of these small bodies and is also critical for the design and/or operations of any device planned to interact with their surfaces. We present the first measurements of transient weakening of granular material after shear reversal in microgravity as well as a summary of experimental results recently published in other journals, which may have important implications for small-body surfaces. Our results suggest that the force contact network within a granular material may be weaker in microgravity, although the influence of any change in the contact network is felt by the granular material over much larger distances. This could mean that small body surfaces are even more unstable than previously imagined. However, our results also indicate that the consequences of, e.g., a meteorite impact or a spacecraft landing, may be very different depending on the impact angle and location, and depending on the prior history of the small body surface.
△ Less
Submitted 7 June, 2013;
originally announced June 2013.
-
Raman backscatter as a remote laser power sensor in high-energy-density plasmas
Authors:
J. D. Moody,
D. J. Strozzi,
L. Divol,
P. Michel,
H. F. Robey,
S. LePape,
J. Ralph,
J. S. Ross,
S. H. Glenzer,
R. K. Kirkwood,
O. L. Landen,
B. J. MacGowan,
A. Nikroo,
E. A. Williams
Abstract:
Stimulated Raman backscatter (SRS) is used as a remote sensor to quantify the instantaneous laser power after transfer from outer to inner cones that cross in a National Ignition Facility (NIF) gas-filled hohlraum plasma. By matching SRS between a shot reducing outer vs a shot reducing inner power we infer that ~half of the incident outer-cone power is transferred to inner cones, for the specific…
▽ More
Stimulated Raman backscatter (SRS) is used as a remote sensor to quantify the instantaneous laser power after transfer from outer to inner cones that cross in a National Ignition Facility (NIF) gas-filled hohlraum plasma. By matching SRS between a shot reducing outer vs a shot reducing inner power we infer that ~half of the incident outer-cone power is transferred to inner cones, for the specific time and wavelength configuration studied. This is the first instantaneous non-disruptive measure of power transfer in an indirect drive NIF experiment using optical measurements.
△ Less
Submitted 19 July, 2013; v1 submitted 29 May, 2013;
originally announced May 2013.
-
Picosecond laser structuration under high pressures: observation of boron nitride nanorods
Authors:
Luc Museur,
Jean Pierre Petitet,
Jean Pierre Michel,
Wladimir Marine,
Demetrios Anglos,
Costa Fotakis,
Andrei Kanaev
Abstract:
We report on picosecond UV-laser processing of hexagonal boron nitride (hBN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are irradiated by 5 ps or 0.45 ps laser pulses in nitrogen gas environment, multiple nucleation of a new crystalline product - BN nanorods - takes place. This process i…
▽ More
We report on picosecond UV-laser processing of hexagonal boron nitride (hBN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are irradiated by 5 ps or 0.45 ps laser pulses in nitrogen gas environment, multiple nucleation of a new crystalline product - BN nanorods - takes place. This process is triggered on structural defects, which number density strongly decreases upon recrystallization. Non-linear photon absorption by adsorbed nitrogen molecules is suggested to mediate the nucleation-growth. High pressure is responsible for the confinement and strong backscattering of ablation products. A strong surface structuring also appears at longer 150-ps laser irradiation in similar experimental conditions. However, the transformed product in this case is amorphous strongly contaminated by boron suboxides BxOy.
△ Less
Submitted 15 November, 2008;
originally announced November 2008.
-
Photoluminescence of hexagonal boron nitride: effect of surface oxidation under UV-laser irradiation
Authors:
Luc Museur,
Demetrios Anglos,
Jean-Pierre Petitet,
Jean Pierre Michel,
Andrei V. Kanaev
Abstract:
We report on the UV laser induced fluorescence of hexagonal boron nitride (h-BN) following nanosecond laser irradiation of the surface under vacuum and in different environments of nitrogen gas and ambient air. The observed fluorescence bands are tentatively ascribed to impurity and mono (VN), or multiple (m-VN with m = 2 or 3) nitrogen vacancies. A structured fluorescence band between 300 nm an…
▽ More
We report on the UV laser induced fluorescence of hexagonal boron nitride (h-BN) following nanosecond laser irradiation of the surface under vacuum and in different environments of nitrogen gas and ambient air. The observed fluorescence bands are tentatively ascribed to impurity and mono (VN), or multiple (m-VN with m = 2 or 3) nitrogen vacancies. A structured fluorescence band between 300 nm and 350 nm is assigned to impurity-band transition and its complex lineshape is attributed to phonon replicas. An additional band at 340 nm, assigned to VN vacancies on surface, is observed under vacuum and quenched by adsorbed molecular oxygen. UV-irradiation of h-BN under vacuum results in a broad asymmetric fluorescence at ~400 nm assigned to m-VN vacancies; further irradiation breaks more B-N bonds enriching the surface with elemental boron. However, no boron deposit appears under irradiation of samples in ambient atmosphere. This effect is explained by oxygen healing of radiation-induced surface defects. Formation of the oxide layer prevents B-N dissociation and preserves the bulk sample stoichiometry.
△ Less
Submitted 4 April, 2008;
originally announced April 2008.
