-
Anisotropic subwavelength grating perturbation enables zero crosstalk in a leaky mode
Authors:
Md Faiyaz Kabir,
Md Borhan Mia,
Ishtiaque Ahmed,
Nafiz Jaidye,
Syed Z. Ahmed,
Sangsik Kim
Abstract:
Electromagnetic coupling via either exponentially decaying evanescent field or radiative wave is a primary characteristic of light, allowing optical signal/power transfer but limiting integration density in a photonic circuit. A leaky mode combines both evanescent field and radiative wave, causing stronger crosstalk and thus not ideal for dense integration. Here we show that a leaky mode with anis…
▽ More
Electromagnetic coupling via either exponentially decaying evanescent field or radiative wave is a primary characteristic of light, allowing optical signal/power transfer but limiting integration density in a photonic circuit. A leaky mode combines both evanescent field and radiative wave, causing stronger crosstalk and thus not ideal for dense integration. Here we show that a leaky mode with anisotropic perturbation rather can achieve completely zero crosstalk realized by subwavelength grating (SWG) metamaterials. The oscillating fields in the SWGs enable coupling coefficients in each direction to counteract each other, resulting in completely zero crosstalk. We experimentally demonstrate such an extraordinarily low coupling between closely spaced identical leaky SWG waveguides, suppressing the crosstalk by $\approx$40 dB compared to conventional strip waveguides, corresponding to $\approx$100 times longer coupling length. This leaky-SWG suppresses the crosstalk of transverse-magnetic (TM) mode, which is challenging due to its low confinement, and marks a novel approach in electromagnetic coupling applicable to other spectral regimes and generic devices.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
A phase-field model for quasi-dynamic nucleation, growth, and propagation of rate-and-state faults
Authors:
Fan Fei,
Md Shumon Mia,
Ahmed E. Elbanna,
**hyun Choo
Abstract:
Despite its critical role in the study of earthquake processes, numerical simulation of the entire stages of fault rupture remains a formidable task. The main challenges in simulating a fault rupture process include complex evolution of fault geometry, frictional contact, and off-fault damage over a wide range of spatial and temporal scales. Here, we develop a phase-field model for quasi-dynamic f…
▽ More
Despite its critical role in the study of earthquake processes, numerical simulation of the entire stages of fault rupture remains a formidable task. The main challenges in simulating a fault rupture process include complex evolution of fault geometry, frictional contact, and off-fault damage over a wide range of spatial and temporal scales. Here, we develop a phase-field model for quasi-dynamic fault nucleation, growth, and propagation, which features two standout advantages: (i) it does not require any sophisticated algorithms to represent fault geometry and its evolution; and (ii) it allows for modeling fault nucleation, propagation, and off-fault damage processes with a single formulation. Built on a recently developed phase-field framework for shear fractures with frictional contact, the proposed formulation incorporates rate- and state-dependent friction, radiation dam**, and their impacts on fault mechanics and off-fault damage. We show that the numerical results of the phase-field model are consistent with those obtained from well-verified approaches that model the fault as a surface of discontinuity, without suffering from the mesh convergence issue in the existing continuous approaches to fault rupture (e.g. the stress glut method). Further, through numerical examples of fault propagation in various settings, we demonstrate that the phase-field approach may open new opportunities for investigating complex earthquake processes that have remained overly challenging for the existing numerical methods.
△ Less
Submitted 19 October, 2022; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Design and analysis of guided modes in photonic waveguides using optical neural network
Authors:
Nusrat Jahan Anika,
Md Borhan Mia
Abstract:
We present a deep learning approach using an optical neural network to predict the fundamental modal indices $n_{\rm{eff}}$ in a silicon (Si) channel waveguide. We use three inputs, e.g., two geometric parameters and one material property, and predict the $n_{\rm{eff}}$ for the transverse electric and transverse magnetic polarizations. With the least number (i.e., $3^3$ or $4^3$) of exact mode sol…
▽ More
We present a deep learning approach using an optical neural network to predict the fundamental modal indices $n_{\rm{eff}}$ in a silicon (Si) channel waveguide. We use three inputs, e.g., two geometric parameters and one material property, and predict the $n_{\rm{eff}}$ for the transverse electric and transverse magnetic polarizations. With the least number (i.e., $3^3$ or $4^3$) of exact mode solutions from Maxwell's equations, we can uncover the solutions which correspond to $10^3$ numerical simulations. Note that this consumes the lowest amount of computational resources. The mean squared errors of the exact and the predicted results are $<10^{-5}$. Moreover, our parameters' ranges are compatible with current photolithography and complementary metal-oxide-semiconductor (CMOS) fabrication technology. We also show the impacts of different transfer functions and neural network layouts on the model's performance. Our approach presents a unique advantage to uncover the guided modes in any photonic waveguides within the least possible numerical simulations.
△ Less
Submitted 2 August, 2020;
originally announced August 2020.
-
Exceptional coupling in extreme skin-depth waveguides for extremely low waveguide crosstalk
Authors:
Md Borhan Mia,
Syed Z. Ahmed,
Ishtiaque Ahmed,
Yun Jo Lee,
Minghao Qi,
Sangsik Kim
Abstract:
Photonic chips can miniaturize complicate optical systems very tiny and portable, providing versatile functionalities for many optical applications. Increasing the photonic chip integration density is highly desired as it provides more functionalities, low cost, and lower power consumption. However, photonic chip integration density is limited by the waveguide crosstalk, which is caused by the eva…
▽ More
Photonic chips can miniaturize complicate optical systems very tiny and portable, providing versatile functionalities for many optical applications. Increasing the photonic chip integration density is highly desired as it provides more functionalities, low cost, and lower power consumption. However, photonic chip integration density is limited by the waveguide crosstalk, which is caused by the evanescent waves in the cladding. Here we show that the waveguide crosstalk can be suppressed completely with the exceptional coupling in extreme skin-depth (eskid) waveguides. The anisotropic dielectric perturbations in the coupled eskid waveguides cause such an exceptional coupling, resulting in infinitely long coupling length. We demonstrate the extreme suppression of waveguide crosstalk via exceptional coupling on a silicon-on-insulator (SOI) platform, which is compatible with a complementary metal-oxide-semiconductor (CMOS) process. The idea of exceptional coupling in eskid waveguides can be applied to many other photonic devices as well, significantly reducing entire chip footprints.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Reverse chemistry of iron in the deep Earth
Authors:
Xiaoli Wang,
Xiaolei Feng,
Jianfu Li,
Dalar Khodagholian,
Jiani Lin,
Matthew G. Jackson,
Frank J. Spera,
Simon A. T. Redfern,
Maosheng Miao
Abstract:
In this work, we demonstrate a remarkable change of chemical trend of Iron under high pressure that is of great importance for understanding the distribution of elements in the Earth's mantle and core. Using first principles crystal structure search method, we conduct a systematic study of the propensity of p block elements to chemically bind with iron under high pressures ranging from ambient con…
▽ More
In this work, we demonstrate a remarkable change of chemical trend of Iron under high pressure that is of great importance for understanding the distribution of elements in the Earth's mantle and core. Using first principles crystal structure search method, we conduct a systematic study of the propensity of p block elements to chemically bind with iron under high pressures ranging from ambient conditions to that of Earth's core. We show that under increasing pressure, iron tends to reverse its chemical nature, changing from an electron donor (reductant) to an electron acceptor, and oxidizes p-block elements in many compounds. Such reverse chemistry has a significant impact on the stoichiometries, bond types and strengths, structures and properties of iron compounds under deep planetary conditions.
△ Less
Submitted 18 August, 2019;
originally announced August 2019.
-
High-pressure hybrid materials that can store hydrogen in table salt
Authors:
Feng Peng,
Yanming Ma,
Maosheng Miao
Abstract:
We demonstrate in this paper that high pressure can promote the reactions between the ionic compounds and H2 molecules and form thermodynamically stable hybrid compounds. Using crystal structure search method based on first principles calculations and particle swarm optimization algorithm, we show that many alkali halides XY (X=Na, K, Rb, Cs; Y=Cl, Br, I) can form stable hybrid compounds with vari…
▽ More
We demonstrate in this paper that high pressure can promote the reactions between the ionic compounds and H2 molecules and form thermodynamically stable hybrid compounds. Using crystal structure search method based on first principles calculations and particle swarm optimization algorithm, we show that many alkali halides XY (X=Na, K, Rb, Cs; Y=Cl, Br, I) can form stable hybrid compounds with various H2 compositions under different pressures that could be as low as 0.8 GPa (KIH2). Especially, the commonly known table salt, NaCl, can form stable NaClH2 and NaCl(H2)4 hybrid compounds under pressures of 19.7 and 37.9 GPa, respectively. Our results demonstrate that pressure can promote the formation of solid-molecule hybrid compounds, which reveals a new unique way of discovering novel materials that can combine the advantages of inorganic compounds and small molecules. A direct application of our work is the proof of turning the common table salt and other similar ionic compounds into hydrogen storage materials under moderate pressures.
△ Less
Submitted 26 July, 2019; v1 submitted 18 July, 2019;
originally announced July 2019.
-
Large Negative Flattened Dispersion over the S+C+L Band Using Highly Birefringent Photonic Crystal Fiber
Authors:
Md Borhan Mia,
Kanan Roy Chowdhury,
Animesh Bala,
Mohammad Faisal
Abstract:
Novel triangular lattice photonic crystal fiber with a very large negative flattened dispersion over the S+C+L band, and very high birefringence is offered here. To investigate different optical properties of the proposed fiber, finite element method (FEM) is deployed. The fiber presents a flattened negative dispersion of $-698.5\pm 5 ps/(nm-km)$ over the wavelength of $1440 nm$ to $1600 nm$. Besi…
▽ More
Novel triangular lattice photonic crystal fiber with a very large negative flattened dispersion over the S+C+L band, and very high birefringence is offered here. To investigate different optical properties of the proposed fiber, finite element method (FEM) is deployed. The fiber presents a flattened negative dispersion of $-698.5\pm 5 ps/(nm-km)$ over the wavelength of $1440 nm$ to $1600 nm$. Besides, the proposed photonic crystal fiber (PCF) exhibits a high birefringence of $1.886\times10^{-2}$ at the wavelength of $1550 nm$. Furthermore, the nonlinearity, single modeness, effective area etc. of the proposed PCF are thoroughly discussed. The fiber would have important applications in broadband residual dispersion compensation as well as polarization maintaining applications.
△ Less
Submitted 20 December, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Highly Nonlinear and Low Confinement Loss Photonic Crystal Fiber Using GaP Slot Core
Authors:
Md Borhan Mia,
Animesh Bala,
Kanan Roy Chowdhury,
Mohammad Faisal
Abstract:
This paper presents a triangular lattice photonic crystal fiber with very high nonlinear coefficient. Finite element method (FEM) is used to scrutinize different optical properties of proposed highly nonlinear photonic crystal fiber (HNL-PCF). The HNL-PCF exhibits a high nonlinearity up to $10\times10^{4} W^{-1}km^{-1}$ over the wavelength of 1500 nm to 1700 nm. Moreover, proposed HNL-PCF shows a…
▽ More
This paper presents a triangular lattice photonic crystal fiber with very high nonlinear coefficient. Finite element method (FEM) is used to scrutinize different optical properties of proposed highly nonlinear photonic crystal fiber (HNL-PCF). The HNL-PCF exhibits a high nonlinearity up to $10\times10^{4} W^{-1}km^{-1}$ over the wavelength of 1500 nm to 1700 nm. Moreover, proposed HNL-PCF shows a very low confinement loss of $10^{-3} dB/km$ at 1550 nm wavelength. Furthermore, chromatic dispersion, dispersion slope, effective area etc. are also analyzed thoroughly. The proposed fiber will be a suitable candidate for broadband dispersion compensation, sensor devices and supercontinuum generation.
△ Less
Submitted 20 December, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Heptagonal Photonic Crystal Fiber for Dispersion Compensation with a Very Low Confinement Loss
Authors:
Md Borhan Mia,
Mohammad Faisal,
Syeda Iffat Naz,
Animesh Bala,
Kanan Roy Chowdhury
Abstract:
This paper presents a photonic crystal fiber (PCF) with heptagonal core and heptagonal cladding for dispersion compensation. Different optical properties of the suggested PCF are explored using the finite element method (FEM). The proposed dispersion compensating PCF (DC-PCF) exhibits a very large negative chromatic dispersion of $-940 ps/(nm-km)$ at $1550 nm$ wavelength. The overall dispersion of…
▽ More
This paper presents a photonic crystal fiber (PCF) with heptagonal core and heptagonal cladding for dispersion compensation. Different optical properties of the suggested PCF are explored using the finite element method (FEM). The proposed dispersion compensating PCF (DC-PCF) exhibits a very large negative chromatic dispersion of $-940 ps/(nm-km)$ at $1550 nm$ wavelength. The overall dispersion of the DC-PCF is $-420.1$ to $-1160 ps/(nm-km)$ in the wavelength range of $1390$ to $1700 nm$ ($310 nm$ band). The relative dispersion slope is $0.0036 nm^{-1}$ which is a perfect match with the standard single mode fibers. Moreover, it exhibits a very low confinement loss of about $10^{-5} dB/km$ and low nonlinearity of $45 W^{-1}km^{-1}$ at $1550 nm$ wavelength. Since the suggested DC-PCF has very high negative dispersion and low nonlinearity, it can be a potential candidate for broadband dispersion compensation in fiber-optic communication.
△ Less
Submitted 16 December, 2017; v1 submitted 28 September, 2017;
originally announced October 2017.
-
ATLAS: A Real-Space Finite-Difference Implementation of Orbital-Free Density Functional Theory
Authors:
Wenhui Mi,
Xuecheng Shao,
Chuanxun Su,
Yuanyuan Zhou,
Shoutao Zhang,
Quan Li,
Hui Wang,
Lijun Zhang,
Maosheng Miao,
Yanchao Wang,
Yanming Ma
Abstract:
Orbital-free density functional theory (OF-DFT) is a promising method for large-scale quantum mechanics simulation as it provides a good balance of accuracy and computational cost. Its applicability to large-scale simulations has been aided by progress in constructing kinetic energy functionals and local pseudopotentials. However, the widespread adoption of OF-DFT requires further improvement in i…
▽ More
Orbital-free density functional theory (OF-DFT) is a promising method for large-scale quantum mechanics simulation as it provides a good balance of accuracy and computational cost. Its applicability to large-scale simulations has been aided by progress in constructing kinetic energy functionals and local pseudopotentials. However, the widespread adoption of OF-DFT requires further improvement in its efficiency and robustly implemented software. Here we develop a real-space finite-difference method for the numerical solution of OF-DFT in periodic systems. Instead of the traditional self-consistent method, a powerful scheme for energy minimization is introduced to solve the Euler--Lagrange equation. Our approach engages both the real-space finite-difference method and a direct energy-minimization scheme for the OF-DFT calculations. The method is coded into the ATLAS software package and benchmarked using periodic systems of solid Mg, Al, and Al$_{3}$Mg. The test results show that our implementation can achieve high accuracy, efficiency, and numerical stability for large-scale simulations.
△ Less
Submitted 27 July, 2015; v1 submitted 27 July, 2015;
originally announced July 2015.
-
Constructing optimal local pseudopotentials from first principles
Authors:
Wenhui Mi,
Shoutao Zhang,
Yanming Ma,
Maosheng Miao
Abstract:
Local pseudopotential (LPP) is an important component of the orbital free density functional theory (OF-DFT), which is a promising large scale simulation method that can still maintain information of electron state in materials. Up to date, LPP is usually extracted from the solid state DFT calculations. It is unclear how to assess its transferability while applying to a much different chemical env…
▽ More
Local pseudopotential (LPP) is an important component of the orbital free density functional theory (OF-DFT), which is a promising large scale simulation method that can still maintain information of electron state in materials. Up to date, LPP is usually extracted from the solid state DFT calculations. It is unclear how to assess its transferability while applying to a much different chemical environment. Here we reveal a fundamental relation between the first principles norm-conserving PP (NCPP) and the LPP. Using the optimized effective potential method developed for exchange functional, we demonstrate that the LPP can be constructed optimally from the NCPP for a large number of elements. Our theory also reveals that the existence of an LPP is intrinsic to the elements, irrespective to the parameters used for the construction. Our method provides a unified method in constructing and assessing LPP in the framework of first principles pseudopotentials.
△ Less
Submitted 10 March, 2015;
originally announced March 2015.
-
Xe anions in stable Mg-Xe compounds: the mechanism of missing Xe in earth atmosphere
Authors:
Mao-sheng Miao
Abstract:
The reactivity of noble gas elements is important for both fundamental chemistry and geological science. The discovery of the oxidation of Xe extended the doctrinal boundary of chemistry that a complete shell is inert to reaction. The oxidations of Xe by various geological substances have been researched in order to explain the missing Xe in earth atmosphere. Among many proposals, the chemistry me…
▽ More
The reactivity of noble gas elements is important for both fundamental chemistry and geological science. The discovery of the oxidation of Xe extended the doctrinal boundary of chemistry that a complete shell is inert to reaction. The oxidations of Xe by various geological substances have been researched in order to explain the missing Xe in earth atmosphere. Among many proposals, the chemistry mechanisms are straightforward as they identify chemical processes that can capture Xe in earth interior. However, all the mechanisms based on current noble gas chemistry face the same difficulty: the earth lower mantle and core are rich in metals and therefore their chemical environment is reductive. On the other hand, up till now, the opposite chemical inclination, the reductive propensity, i.e. gaining electrons and forming anions, has not been proposed and examined for noble gas elements. In this work, we demonstrate, using first principles calculations and an efficient structure prediction method, that Xe and Kr can form stable MgXe and MgKr compounds under high pressure. These compounds are intermetallic and Xe or Kr is negatively charged. We also find that elevated temperature has large effect in stabilizing MgXe and MgKr compounds. Our results show that the earth has the capability of capturing Xe but not Kr, which is consistent to the depletion of Xe in earth atmosphere. The stability of these compounds suggests that chemical species with completely filled shell may still gain more electrons filling their outer shell in chemical reactions.
△ Less
Submitted 12 September, 2013; v1 submitted 1 September, 2013;
originally announced September 2013.
-
Cs in high oxidation states and as a p-block element
Authors:
Mao-sheng Miao
Abstract:
The major chemical feature of an element is the number of electrons available for forming chemical bonds. A doctrine rooted in the atomic shell model states that the atoms will maintain a complete inner shell while interacting with other atoms. Therefore, group IA elements, for example, are invariably stable in the +1 charge state because the p electrons of their inner shells do not react with oth…
▽ More
The major chemical feature of an element is the number of electrons available for forming chemical bonds. A doctrine rooted in the atomic shell model states that the atoms will maintain a complete inner shell while interacting with other atoms. Therefore, group IA elements, for example, are invariably stable in the +1 charge state because the p electrons of their inner shells do not react with other chemical species. This general rule governs our understanding of the structures and reactions of matter and has never been challenged. In this work, we show for the first time that while mixing with fluorine under pressure, Cs atoms will share their 5p electrons and become oxidized to a higher charge state. The formal oxidation state can be as high as +5 within the pressure range of our study (<200 GPa) and stable Cs2+ and Cs3+ compounds can form at lower pressures. While sharing its 5p electrons, Cs behaves like a p-block element forming compounds with molecular, covalent, ionic and metallic features. Considering the pressure range required for the CsFn compounds, the inner shell electrons in other group IA and IIA elements may also bond with F or other chemical species under higher pressure.
△ Less
Submitted 26 December, 2012;
originally announced December 2012.
-
Diamondoid Structure of Polymeric Nitrogen at High Pressures
Authors:
Xiaoli Wang,
Yanchao Wang,
Maosheng Miao,
Xin Zhong,
Jian Lv,
Jianfu Li,
Li Chen,
Chris J. Pickard,
Yanming Ma
Abstract:
High-pressure polymeric structures of nitrogen have attracted great attention owing to their potential application as high-energy-density materials. We report the density functional structural prediction of the unexpected stabilization of a diamondoid (or N10-cage) structure of polymeric nitrogen at high pressures. The structure adopts a highly symmetric body-centered cubic form with lattice sites…
▽ More
High-pressure polymeric structures of nitrogen have attracted great attention owing to their potential application as high-energy-density materials. We report the density functional structural prediction of the unexpected stabilization of a diamondoid (or N10-cage) structure of polymeric nitrogen at high pressures. The structure adopts a highly symmetric body-centered cubic form with lattice sites occupied by N10 tetracyclic cages, each of which consists of 10 atoms and is covalently bonded with its six next-nearest N10 cages. The prediction of this diamondoid structure rules out the earlier proposed helical tunnel phase and demonstrates the high-order nature of polymeric nitrogen at extreme high pressures. Diamondoid nitrogen is a wide-gap insulator and energetically more favorable than the experimental cubic gauche and previously predicted layered Pba2 phases above 263 GPa, a pressure which is accessible to high pressure experiment.
△ Less
Submitted 25 June, 2012;
originally announced June 2012.
-
High pressures make Hg a transition metal in a thermodynamically stable solid
Authors:
Xiaoli Wang,
Haiqing Lin,
Yanming Ma,
Mao-Sheng Miao
Abstract:
The appropriateness of including Hg among the transition metals has been debated for a long time. Although the synthesis of HgF$_{4}$ molecules in gas phase was reported before, the molecules show strong instabilities and dissociate. Therefore, the transition metal propensity of Hg remains an open question. Here, we propose that high pressure provides a controllable method for preparing unusual ox…
▽ More
The appropriateness of including Hg among the transition metals has been debated for a long time. Although the synthesis of HgF$_{4}$ molecules in gas phase was reported before, the molecules show strong instabilities and dissociate. Therefore, the transition metal propensity of Hg remains an open question. Here, we propose that high pressure provides a controllable method for preparing unusual oxidation states of matter. Using an advanced structure search method based on first-principles electronic structure calculations, we predict that under high pressures, Hg can transfer the electrons in its outmost $d$ shell to F atoms, thereby acting as a transition metal. Oxidation of Hg to the +4 state yielded thermodynamically stable molecular crystals consisting of HgF$_{4}$ planar molecules, a typical geometry for $d^{8}$ metal centers.
△ Less
Submitted 13 June, 2012;
originally announced June 2012.
