-
Measurement of Snowpack Density, Grain Size, and Black Carbon Concentration Using Time-domain Diffuse Optics
Authors:
Connor Henley,
Joseph Hollmann,
Colin Meyer,
Ramesh Raskar
Abstract:
Diffuse optical spectroscopy (DOS) techniques aim to characterize scattering media by examining their optical response to laser illumination. Time-domain DOS methods involve illuminating the medium with a laser pulse and using a fast photodetector to measure the time-dependent intensity of light that exits the medium after multiple scattering events. While DOS research traditionally focused on cha…
▽ More
Diffuse optical spectroscopy (DOS) techniques aim to characterize scattering media by examining their optical response to laser illumination. Time-domain DOS methods involve illuminating the medium with a laser pulse and using a fast photodetector to measure the time-dependent intensity of light that exits the medium after multiple scattering events. While DOS research traditionally focused on characterizing biological tissues, we demonstrate that time-domain diffuse optical measurements can also be used to characterize snow. We introduce a model that predicts the time-dependent reflectance of a dry snowpack as a function of its density, grain size, and black carbon content, and we develop an algorithm that retrieves these properties from measurements at two wavelengths. To validate our approach, we use a two-wavelength lidar system and measure the time-dependent reflectance of snow samples with varying properties. Rather than measuring direct surface returns, our system captures photons that enter and exit the snow at different points, separated by a small distance (4-10cm). We find strong, linear correlations between our retrievals of density and black carbon concentration, and ground truth measurements. Although the correlation is not as strong, we also find that our method is capable of distinguishing between small and large grains.
△ Less
Submitted 16 April, 2024; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Disparities in access to US quantum information education
Authors:
Josephine C. Meyer,
Gina Passante,
Bethany R. Wilcox
Abstract:
Driven in large part by the National Quantum Initiative Act of 2018, quantum information science (QIS) coursework and degree programs are rapidly spreading across US institutions. Yet prior work suggests that access to quantum workforce education is unequally distributed, disproportionately benefiting students at private research-focused institutions whose student bodies are unrepresentative of US…
▽ More
Driven in large part by the National Quantum Initiative Act of 2018, quantum information science (QIS) coursework and degree programs are rapidly spreading across US institutions. Yet prior work suggests that access to quantum workforce education is unequally distributed, disproportionately benefiting students at private research-focused institutions whose student bodies are unrepresentative of US higher education as a whole. We use regression analysis to analyze the distribution of QIS coursework across 456 institutions of higher learning as of fall 2022, identifying statistically significant disparities across institutions in particular along the axes of institution classification, funding, and geographic distribution suggesting today's QIS education programs are largely failing to reach low-income and rural students. We also conduct a brief analysis of the distribution of emerging dedicated QIS degree programs, discovering much the same trends. We conclude with a discussion of implications for educators, policymakers, and education researchers including specific policy recommendations to direct investments in QIS education to schools serving low-income and rural students, leverage existing grassroots diversity and inclusion initiatives that have arisen within the quantum community, and update and modernize procedures for collecting QIS educational data to better track these trends.
△ Less
Submitted 15 March, 2024; v1 submitted 12 September, 2023;
originally announced September 2023.
-
Estimates of Proton and Electron Heating Rates Extended to the Near-Sun Environment
Authors:
R. Bandyopadhyay,
C. M. Meyer,
W. H. Matthaeus,
D. J. McComas,
S. R. Cranmer,
J. S. Halekas,
J. Huang,
D. E. Larson,
R. Livi,
A. Rahmati,
P. L. Whittlesey,
M. L. Stevens,
J. C. Kasper,
S. D. Bale
Abstract:
A central problem of space plasma physics is how protons and electrons are heated in a turbulent, magnetized plasma. The differential heating of charged species due to dissipation of turbulent fluctuations plays a key role in solar wind evolution. Measurements from previous heliophysics missions have provided estimates of proton and electron heating rates beyond 0.27 au. Using Parker Solar Probe (…
▽ More
A central problem of space plasma physics is how protons and electrons are heated in a turbulent, magnetized plasma. The differential heating of charged species due to dissipation of turbulent fluctuations plays a key role in solar wind evolution. Measurements from previous heliophysics missions have provided estimates of proton and electron heating rates beyond 0.27 au. Using Parker Solar Probe (PSP) data accumulated during the first ten encounters, we extend the evaluation of the individual rates of heat deposition for protons and electrons in to a distance of 0.063 au (13.5 solar radii), in the newly formed solar wind. The PSP data in the near-Sun environment show different behavior of the electron heat conduction flux from what was predicted from previous fits to Helios and Ulysses data. Consequently, the empirically derived proton and electron heating rates exhibit significantly different behavior than previous reports, with the proton heating becoming increasingly dominant over electron heating at decreasing heliocentric distances. We find that the protons receive about 80% of the total plasma heating at ~ 13 solar radii, slightly higher than the near-Earth values. This empirically derived heating partition between protons and electrons will help to constrain theoretical models of solar wind heating.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Introductory quantum information science coursework at US institutions: Content coverage
Authors:
Josephine C. Meyer,
Gina Passante,
Steven J. Pollock,
Bethany R. Wilcox
Abstract:
Despite rapid growth of quantum information science and engineering (QIS/QISE) workforce development initiatives, perceived lack of agreement among faculty on core content has made prior research-based curriculum and assessment development initiatives difficult to scale. To identify areas if consensus on content coverage, we report findings from a survey of N=63 instructors teaching introductory Q…
▽ More
Despite rapid growth of quantum information science and engineering (QIS/QISE) workforce development initiatives, perceived lack of agreement among faculty on core content has made prior research-based curriculum and assessment development initiatives difficult to scale. To identify areas if consensus on content coverage, we report findings from a survey of N=63 instructors teaching introductory QISE courses at US institutions of higher learning. We identify a subset of content items common across a large fraction (>=80%) of introductory QISE courses that are potentially amenable to research-based curriculum development, with an emphasis on foundational skills in mathematics, physics, and engineering. As a further guide for curriculum development, we also examine differences in content coverage by level (undergraduate/graduate) and discipline. Finally, we briefly discuss the implications of our findings for the development of a research-based QISE assessment at the postsecondary level.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
A Holistic Approach to Quantum Ethics Education
Authors:
Joan Étude Arrow,
Sara E. Marsh,
Josephine C. Meyer
Abstract:
This paper first provides an overview of the growing subfield of quantum ethics, including a working definition; research to date into social, economic, and political implications of quantum technologies; and directions for future research. Second, it introduces the Quantum Ethics Project (QEP), its activities to date, and its organizing philosophy. The third section reports on QEP's ongoing curri…
▽ More
This paper first provides an overview of the growing subfield of quantum ethics, including a working definition; research to date into social, economic, and political implications of quantum technologies; and directions for future research. Second, it introduces the Quantum Ethics Project (QEP), its activities to date, and its organizing philosophy. The third section reports on QEP's ongoing curriculum development work, i.e. creating one of the first full-length courses on Ethics and Social Impacts of Quantum Technology. We outline the pedagogical approach being taken in the course design, including key learning outcomes, topic areas, teaching methods, and rationale. Finally, we discuss current limitations and future areas of attention, such as drawbacks to teaching ethical reasoning and ideas for assessment and implementation.
△ Less
Submitted 26 July, 2023; v1 submitted 30 May, 2023;
originally announced June 2023.
-
How media hype affects our physics teaching: A case study on quantum computing
Authors:
Josephine C. Meyer,
Gina Passante,
Steven J. Pollock,
Bethany R. Wilcox
Abstract:
Popular media is an unspoken yet ever-present element of the physics landscape and a tool we can utilize in our teaching. It is also well-understood that students enter the physics classroom with a host of conceptions learned from the world at large. It stands to reason, then, to suspect that media coverage may be a major contributing factor to students' views on physical phenomena and the nature…
▽ More
Popular media is an unspoken yet ever-present element of the physics landscape and a tool we can utilize in our teaching. It is also well-understood that students enter the physics classroom with a host of conceptions learned from the world at large. It stands to reason, then, to suspect that media coverage may be a major contributing factor to students' views on physical phenomena and the nature of science - one whose influence will only grow amid the 21st century digital age. Yet the role of the media in sha** physics teaching and learning has remained largely unexplored in the physics education research (PER) literature so far.
Here, we explore the phenomenon of media hype from a theoretical and practical perspective: how media rhetoric of current topics in science and technology evolves, and how it affects students and instructors. We argue that media hype of cutting-edge science can be a double-edged sword for educators, with the same amped-up rhetoric that motivates students to enter the classroom tending to result in inflated preconceptions of what the science and technology can actually do. We draw on examples related to teaching quantum computing as a case study, though the findings we present should generalize to other topics garnering significant media attention - from exoplanets to graphene to batteries for electric vehicles. We conclude with a set of practical recommendations for physics teachers at all levels who wish to be more cognizant of the role exposure to popular media has on students and to tailor our teaching accordingly.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Investigating student interpretations of the differences between classical and quantum computers: Are quantum computers just analog classical computers?
Authors:
Josephine C. Meyer,
Gina Passante,
Steven J. Pollock,
Bethany R. Wilcox
Abstract:
Significant attention in the PER community has been paid to student cognition and reasoning processes in undergraduate quantum mechanics. Until recently, however, these same topics have remained largely unexplored in the context of emerging interdisciplinary quantum information science (QIS) courses. We conducted exploratory interviews with 22 students in an upper-division quantum computing course…
▽ More
Significant attention in the PER community has been paid to student cognition and reasoning processes in undergraduate quantum mechanics. Until recently, however, these same topics have remained largely unexplored in the context of emerging interdisciplinary quantum information science (QIS) courses. We conducted exploratory interviews with 22 students in an upper-division quantum computing course at a large R1 university crosslisted in physics and computer science, as well as 6 graduate students in a similar graduate-level QIS course offered in physics. We classify and analyze students' responses to a pair of questions regarding the fundamental differences between classical and quantum computers. We specifically note two key themes of importance to educators: (1) when reasoning about computational power, students often struggled to distinguish between the relative effects of exponential and linear scaling, resulting in students frequently focusing on distinctions that are arguably better understood as analog-digital than classical-quantum, and (2) introducing the thought experiment of analog classical computers was a powerful tool for hel** students develop a more expertlike perspective on the differences between classical and quantum computers.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
A mushy source for the geysers of Enceladus
Authors:
Colin R. Meyer,
Jacob J. Buffo,
Francis Nimmo,
Andrew J. Wells,
Samuel Boury,
Tara C. Tomlinson,
Jamie R. G. Parkinson,
Geoffrey M. Vasil
Abstract:
Enceladus is a primary target for astrobiology due to the $\rm H_2O$ plume ejecta measured by the Cassini spacecraft and the inferred subsurface ocean sustained by tidal heating. Sourcing the plumes via a direct connection from the ocean to the surface requires a fracture through the entire ice shell ($\sim$10 km). Here we explore an alternative mechanism in which shear heating within shallower ti…
▽ More
Enceladus is a primary target for astrobiology due to the $\rm H_2O$ plume ejecta measured by the Cassini spacecraft and the inferred subsurface ocean sustained by tidal heating. Sourcing the plumes via a direct connection from the ocean to the surface requires a fracture through the entire ice shell ($\sim$10 km). Here we explore an alternative mechanism in which shear heating within shallower tiger stripe fractures produces partial melting in the ice shell and interstitial convection allows fluid to be ejected as geysers. We use an idealized two-dimensional multiphase reactive transport model to simulate the thermomechanics of a mushy region generated by an upper bound estimate for the localized shear heating rate in a salty ice shell. From our simulations, we predict the temperature, porosity, salt content, melting rate, and liquid volume of an intrashell mushy zone surrounding a fracture. We find that the rate of internal melting can match the observed $\rm H_2O$ eruption rate and that there is sufficient brine volume within the mushy zone to sustain the geysers for $\sim350$ kyr without additional melting. The composition of the liquid brine is, however, distinct from that of the ocean, due to partial melting. This shear heating mechanism for geyser formation applies to Enceladus and other icy moons and has implications for our understanding of the geophysical processes and astrobiological potential of icy satellites.
△ Less
Submitted 24 April, 2023; v1 submitted 13 August, 2022;
originally announced August 2022.
-
The interdisciplinary quantum information classroom: Themes from a survey of quantum information science instructors
Authors:
Josephine C. Meyer,
Gina Passante,
Steven J. Pollock,
Bethany R. Wilcox
Abstract:
Interdisciplinary introduction to quantum information science (QIS) courses are proliferating at universities across the US, but the experiences of instructors in these courses have remained largely unexplored in the discipline-based education research (DBER) communities. Here, we address this gap by reporting on the findings of a survey of instructors teaching introduction to QIS courses at insti…
▽ More
Interdisciplinary introduction to quantum information science (QIS) courses are proliferating at universities across the US, but the experiences of instructors in these courses have remained largely unexplored in the discipline-based education research (DBER) communities. Here, we address this gap by reporting on the findings of a survey of instructors teaching introduction to QIS courses at institutions across the US, primarily at the undergraduate or hybrid undergraduate/graduate level, as well as follow-up focus interviews with six individual instructors. Key themes from this analysis include challenges and opportunities associated with the diversity of instructor and student backgrounds, student difficulties with the mathematical formalism (especially though not exclusively with linear algebra), and the need for better textbooks and curricular materials. We also find that while course topics are ostensibly similar, each course is crafted by its instructor to tell a different story about QIS and to uniquely balance goals such as accessibility and academic rigor, such that no canonical introduction to QIS course emerges from our dataset. We discuss the implications of this finding with regard to the benefits and risks associated with standardization of curricula as QIS coursework matures.
△ Less
Submitted 5 May, 2022; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Ethics education in the quantum information science classroom: Exploring attitudes, barriers, and opportunities
Authors:
Josephine Meyer,
Noah Finkelstein,
Bethany Wilcox
Abstract:
Quantum information science (QIS) is an emerging interdisciplinary field at the intersection of physics, computer science, electrical engineering, and mathematics leveraging the laws of quantum mechanics to circumvent classical limitations on information processing. With QIS coursework proliferating across US institutions, including at the undergraduate level, we argue that it is imperative that e…
▽ More
Quantum information science (QIS) is an emerging interdisciplinary field at the intersection of physics, computer science, electrical engineering, and mathematics leveraging the laws of quantum mechanics to circumvent classical limitations on information processing. With QIS coursework proliferating across US institutions, including at the undergraduate level, we argue that it is imperative that ethics and social responsibility be incorporated into QIS education from the beginning. We discuss ethical issues of particular relevance to QIS education that educators may wish to incorporate into their curricula. We then report on findings from focus interviews with six faculty who have taught introductory QIS courses, focusing on barriers to and opportunities for incorporation of ethics and social responsibility (ESR) into the QIS classroom. Few faculty had explicitly considered discussion of ethical issues in the classroom prior to the interview, yet instructor attitudes shifted markedly in support of incorporating ESR in the classroom as a result of the interview process itself. Taking into account faculty's perception of obstacles to discussing issues of ESR in coursework, we propose next steps toward making ESR education in the QIS classroom a reality.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Aligned Stacking of Nanopatterned 2D materials -- Towards 3D printing at atomic resolution
Authors:
Jonas Haas,
Finn Ulrich,
Christoph Hofer,
Xiao Wang,
Kai Braun,
Jannik C. Meyer
Abstract:
Two-dimensional materials can be combined by placing individual layers on top of each other, so that they are bound only by their van der Waals interaction. The sequence of layers can be chosen arbitrarily, enabling an essentially atomic-level control of the material and thereby a wide choice of properties along one dimension. However, simultaneous control over the structure in the in-plane direct…
▽ More
Two-dimensional materials can be combined by placing individual layers on top of each other, so that they are bound only by their van der Waals interaction. The sequence of layers can be chosen arbitrarily, enabling an essentially atomic-level control of the material and thereby a wide choice of properties along one dimension. However, simultaneous control over the structure in the in-plane directions is so far still rather limited. Here, we combine spatially controlled modifications of 2D materials, using focused electron irradiation or electron beam induced etching, with the layer-by-layer assembly of van der Waals heterostructures. A novel assembly process makes it possible to structure each layer with an arbitrary pattern prior to the assembly into the heterostructure. Moreover, it enables a stacking of the layers with accurate lateral alignment, with an accuracy of currently 10nm, under observation in an electron microscope. Together, this enables the fabrication of almost arbitrary 3D structures with highest spatial resolution.
△ Less
Submitted 18 October, 2021; v1 submitted 15 October, 2021;
originally announced October 2021.
-
A thermomechanical model for frost heave and subglacial frozen fringe
Authors:
Colin R. Meyer,
Christian Schoof,
Alan W. Rempel
Abstract:
Ice-infiltrated sediment, known as a frozen fringe, leads to phenomena such as frost heave, ice lenses, and meters of debris-rich ice under glaciers. Understanding the dynamics of frozen fringe development is important as frost heave is responsible for damaging infrastructure at high latitudes and frozen sediments at the base of glaciers can modulate glacier flow, influencing the rate of global se…
▽ More
Ice-infiltrated sediment, known as a frozen fringe, leads to phenomena such as frost heave, ice lenses, and meters of debris-rich ice under glaciers. Understanding the dynamics of frozen fringe development is important as frost heave is responsible for damaging infrastructure at high latitudes and frozen sediments at the base of glaciers can modulate glacier flow, influencing the rate of global sea level rise. Here we study the fluid physics of interstitial freezing water in sediments and focus on the conditions relevant for subglacial environments. We describe the thermomechanics of liquid water flow through and freezing in ice-saturated frozen sediments. The force balance that governs the frozen fringe thickness depends on the weight of the overlying material, the thermomolecular force between ice and sediments across premelted films of liquid, and the water pressure within liquid films that is required by flow according to Darcy's law. We combine this mechanical model with an enthalpy method which conserves energy across phase change interfaces on a fixed computational grid. The force balance and enthalpy model together determine the evolution of the frozen fringe thickness and our simulations predict frost heave rates and ice lens spacing. Our model accounts for premelting at ice-sediment contacts, partial ice saturation of the pore space, water flow through the fringe, the thermodynamics of the ice-water-sediment interface, and vertical force balance. We explicitly account for the formation of ice lenses, regions of pure ice that cleave the fringe at the depth where the interparticle force vanishes. Our model results allow us to predict the thickness of a frozen fringe and the spacing of ice lenses at the base of glaciers.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Towards Exotic Layered Materials: 2D Cuprous Iodide
Authors:
Kimmo Mustonen,
Christoph Hofer,
Peter Kotrusz,
Alexander Markevich,
Martin Hulman,
Clemens Mangler,
Toma Susi,
Timothy J. Pennycook,
Karol Hricovini,
Christine M. Richter,
Jannik C. Meyer,
Jani Kotakoski,
Viera Skakalova
Abstract:
Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the lar…
▽ More
Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the large number of layered materials that may exist in other temperatures and pressures. Here, we demonstrate how these structures can be stabilized in 2D van der Waals stacks under room temperature via growing them directly in graphene encapsulation by using graphene oxide as the template material. Specifically, we produce an ambient stable 2D structure of copper and iodine, a material that normally only occurs in layered form at elevated temperatures between 645 and 675 K. Our results establish a route to the production of more exotic phases of materials that would otherwise be difficult or impossible to stabilize for experiments in ambient.
△ Less
Submitted 3 December, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Magnetic properties of {M$_4$} coordination clusters with different magnetic cores (M=Co, Mn)
Authors:
Simona Achilli,
Claire Besson,
Xu He,
Pablo Ordejòn,
Carola Meyer,
Zeila Zanolli
Abstract:
We present a joint experimental and theoretical characterization of the magnetic properties of coordination clusters with an antiferromagnetic core of four magnetic ions. Two different compounds are analyzed, with Co and Mn ions in the core. While both molecules are antiferromagnetic, they display different sensitivities to external magnetic field, according to the different strength of the intra-…
▽ More
We present a joint experimental and theoretical characterization of the magnetic properties of coordination clusters with an antiferromagnetic core of four magnetic ions. Two different compounds are analyzed, with Co and Mn ions in the core. While both molecules are antiferromagnetic, they display different sensitivities to external magnetic field, according to the different strength of the intra-molecular magnetic coupling. In particular, the dependence of the magnetization versus field of the two molecules switches with temperatures: at low temperature the magnetization is smaller in \{Mn$_4$\}, while the opposite happens at high temperature. Through a detailed analysis of the electronic and magnetic properties of the two compounds we identify a stronger magnetic interaction between the magnetic ions in \{Mn$_4$\} with respect to \{Co$_4$\}. Moreover \{Co$_4$\} displays not negligible spin-orbit related effects that could affect the spin lifetime in future antiferromagnetic spintronic applications. We highlight the necessity to account for these spin-orbit effects for a reliable description of these compounds.
△ Less
Submitted 15 September, 2021; v1 submitted 15 July, 2021;
originally announced July 2021.
-
Tesla's fluidic diode and the electronic-hydraulic analogy
Authors:
Quynh M. Nguyen,
Dean Huang,
Evan Zauderer,
Genevieve Romanelli,
Charlotte L. Meyer,
Leif Ristroph
Abstract:
Reasoning by analogy is powerful in physics for students and researchers alike, a case in point being electronics and hydraulics as analogous studies of electric currents and fluid flows. Around 100 years ago, Nikola Tesla proposed a flow control device intended to operate similarly to an electronic diode, allowing fluid to pass easily in one direction but providing high resistance in reverse. Her…
▽ More
Reasoning by analogy is powerful in physics for students and researchers alike, a case in point being electronics and hydraulics as analogous studies of electric currents and fluid flows. Around 100 years ago, Nikola Tesla proposed a flow control device intended to operate similarly to an electronic diode, allowing fluid to pass easily in one direction but providing high resistance in reverse. Here we use experimental tests of Tesla's diode to illustrate principles of the electronic-hydraulic analogy. We design and construct a differential pressure chamber (akin to a battery) that is used to measure flow rate (current) and thus resistance of a given pipe or channel (circuit element). Our results prove the validity of Tesla's device, whose anisotropic resistance derives from its asymmetric internal geometry interacting with high-inertia flows, as quantified by the Reynolds number (here, Re ~ 1e3). Through the design and testing of new fluidic diodes, we explore the limitations of the analogy and the challenges of shape optimization in fluid mechanics. We also provide materials that may be incorporated into lesson plans for fluid dynamics courses, laboratory modules and further research projects.
△ Less
Submitted 27 March, 2021;
originally announced March 2021.
-
Convection in a mushy-layer along a heated wall
Authors:
Samuel Boury,
Colin R. Meyer,
Geoffrey M. Vasil,
Andrew J. Wells
Abstract:
Motivated by the mushy zones of sea ice, volcanoes, and icy moons of the outer solar system, we perform a theoretical and numerical study of boundary-layer convection along a vertical heated wall in a bounded ideal mushy region. The mush is comprised of a porous and reactive binary alloy with a mixture of saline liquid in a solid matrix, and is studied in the near-eutectic approximation. Here we d…
▽ More
Motivated by the mushy zones of sea ice, volcanoes, and icy moons of the outer solar system, we perform a theoretical and numerical study of boundary-layer convection along a vertical heated wall in a bounded ideal mushy region. The mush is comprised of a porous and reactive binary alloy with a mixture of saline liquid in a solid matrix, and is studied in the near-eutectic approximation. Here we demonstrate the existence of four regions and study their behavior asymptotically. Starting from the bottom of the wall, the four regions are (i) an isotropic corner region; (ii) a buoyancy dominated vertical boundary layer; (iii) an isotropic connection region; and (iv) a horizontal boundary layer at the top boundary with strong gradients of pressure and buoyancy. Scalings from numerical simulations are consistent with the theoretical predictions. Close to the heated wall, the convection in the mushy layer is similar to a rising buoyant plume abruptly stopped at the top, leading to increased pressure and temperature in the upper region, whose impact is discussed as an efficient melting mechanism.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
Capillary stam** of functional materials: parallel additive substrate patterning without ink depletion
Authors:
Mercedes Runge,
Hanna Hübner,
Alexander Grimm,
Gririraj Manoharan,
René Wieczorek,
Michael Philippi,
Wolfgang Harneit,
Carola Meyer,
Dirk Enke,
Markus Gallei,
Martin Steinhart
Abstract:
Patterned substrates for optics, electronics, sensing, lab-on-chip technologies, bioanalytics, clinical diagnostics as well as translational and personalized medicine are typically prepared by additive substrate manufacturing including ballistic printing and microcontact printing. However, ballistic printing (e.g., ink jet and aerosol jet printing, laser-induced forward transfer) involves serial p…
▽ More
Patterned substrates for optics, electronics, sensing, lab-on-chip technologies, bioanalytics, clinical diagnostics as well as translational and personalized medicine are typically prepared by additive substrate manufacturing including ballistic printing and microcontact printing. However, ballistic printing (e.g., ink jet and aerosol jet printing, laser-induced forward transfer) involves serial pixel-by-pixel ink deposition. Parallel additive pattering by microcontact printing is performed with solid elastomeric stamps suffering from ink depletion after a few stamp-substrate contacts. The throughput limitations of additive state-of-the-art patterning thus arising may be overcome by capillary stam** - parallel additive substrate patterning without ink depletion by mesoporous silica stamps, which enable ink supply through the mesopores anytime during stam**. Thus, either arrays of substrate-bound nanoparticles or colloidal nanodispersions of detached nanoparticles are accessible. We processed three types of model inks: 1) drug solutions, 2) solutions containing metallopolymers and block copolymers as well as 3) nanodiamond suspensions representing colloidal nanoparticle inks. Thus, we obtained aqueous colloidal nanodispersions of stamped drug nanoparticles, regularly arranged ceramic nanoparticles by post-stam** pyrolysis of stamped metallopolymeric precursor nanoparticles and regularly arranged nanodiamond nanoaggregates. Capillary stam** may overcome the throughput limitations of state-of-the-art additive substrate manufacturing while a broad range of different inks can be processed.
△ Less
Submitted 27 December, 2020;
originally announced December 2020.
-
The GlueX Beamline and Detector
Authors:
S. Adhikari,
C. S. Akondi,
H. Al Ghoul,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
J. Benesch,
V. V. Berdnikov,
G. Biallas,
T. Black,
W. Boeglin,
P. Brindza,
W. J. Briscoe,
T. Britton,
J. Brock,
W. K. Brooks,
B. E. Cannon,
C. Carlin
, et al. (165 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based…
▽ More
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based on triplet photoproduction. Charged-particle tracks from interactions in the central target are analyzed in a solenoidal field using a central straw-tube drift chamber and six packages of planar chambers with cathode strips and drift wires. Electromagnetic showers are reconstructed in a cylindrical scintillating fiber calorimeter inside the magnet and a lead-glass array downstream. Charged particle identification is achieved by measuring energy loss in the wire chambers and using the flight time of particles between the target and detectors outside the magnet. The signals from all detectors are recorded with flash ADCs and/or pipeline TDCs into memories allowing trigger decisions with a latency of 3.3 $μ$s. The detector operates routinely at trigger rates of 40 kHz and data rates of 600 megabytes per second. We describe the photon beam, the GlueX detector components, electronics, data-acquisition and monitoring systems, and the performance of the experiment during the first three years of operation.
△ Less
Submitted 26 October, 2020; v1 submitted 28 May, 2020;
originally announced May 2020.
-
The Central Drift Chamber for GlueX
Authors:
N. S. Jarvis,
C. A. Meyer,
B. Zihlmann,
M. Staib,
A. Austregesilo,
F. Barbosa,
C. Dickover,
V. Razmyslovich,
S. Taylor,
Y. Van Haarlem,
G. Visser,
T. Whitlatch
Abstract:
The Central Drift Chamber is a straw-tube wire chamber of cylindrical structure located surrounding the target inside the bore of the GlueX spectrometer solenoid. Its purpose is to detect and track charged particles with momenta as low as 0.25 GeV/c as well as to identify low-momentum protons via energy loss. The construction of the detector is described and its operation and calibration are discu…
▽ More
The Central Drift Chamber is a straw-tube wire chamber of cylindrical structure located surrounding the target inside the bore of the GlueX spectrometer solenoid. Its purpose is to detect and track charged particles with momenta as low as 0.25 GeV/c as well as to identify low-momentum protons via energy loss. The construction of the detector is described and its operation and calibration are discussed in detail. The design goal of 150 microns in position resolution has been reached.
△ Less
Submitted 27 February, 2020; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Direct visualization of the 3D structure of silicon impurities in graphene
Authors:
Christoph Hofer,
Viera Skakalova,
Mohammad Reza Ahmadpour Monazam,
Clemens Mangler,
Jani Kotakoski,
Toma Susi,
Jannik C. Meyer
Abstract:
We directly visualize the three-dimensional (3D) geometry and dynamics of silicon impurities in graphene as well as their dynamics by aberration-corrected scanning transmission electron microscopy. By acquiring images when the sample is tilted, we show that an asymmetry of the atomic position of the heteroatom in the projection reveals the non-planarity of the structure. From a sequence of images,…
▽ More
We directly visualize the three-dimensional (3D) geometry and dynamics of silicon impurities in graphene as well as their dynamics by aberration-corrected scanning transmission electron microscopy. By acquiring images when the sample is tilted, we show that an asymmetry of the atomic position of the heteroatom in the projection reveals the non-planarity of the structure. From a sequence of images, we further demonstrate that the Si atom switches between up- and down- configurations with respect to the graphene plane, with an asymmetric cross-section. We further analyze the 3D structure and dynamics of a silicon tetramer in graphene. Our results clarify the out-of-plane structure of impurities in graphene by direct experimental observation and open a new route to study their dynamics in three dimensions.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
Deep learning to achieve clinically applicable segmentation of head and neck anatomy for radiotherapy
Authors:
Stanislav Nikolov,
Sam Blackwell,
Alexei Zverovitch,
Ruheena Mendes,
Michelle Livne,
Jeffrey De Fauw,
Yojan Patel,
Clemens Meyer,
Harry Askham,
Bernardino Romera-Paredes,
Christopher Kelly,
Alan Karthikesalingam,
Carlton Chu,
Dawn Carnell,
Cheng Boon,
Derek D'Souza,
Syed Ali Moinuddin,
Bethany Garie,
Yasmin McQuinlan,
Sarah Ireland,
Kiarna Hampton,
Krystle Fuller,
Hugh Montgomery,
Geraint Rees,
Mustafa Suleyman
, et al. (4 additional authors not shown)
Abstract:
Over half a million individuals are diagnosed with head and neck cancer each year worldwide. Radiotherapy is an important curative treatment for this disease, but it requires manual time consuming delineation of radio-sensitive organs at risk (OARs). This planning process can delay treatment, while also introducing inter-operator variability with resulting downstream radiation dose differences. Wh…
▽ More
Over half a million individuals are diagnosed with head and neck cancer each year worldwide. Radiotherapy is an important curative treatment for this disease, but it requires manual time consuming delineation of radio-sensitive organs at risk (OARs). This planning process can delay treatment, while also introducing inter-operator variability with resulting downstream radiation dose differences. While auto-segmentation algorithms offer a potentially time-saving solution, the challenges in defining, quantifying and achieving expert performance remain. Adopting a deep learning approach, we demonstrate a 3D U-Net architecture that achieves expert-level performance in delineating 21 distinct head and neck OARs commonly segmented in clinical practice. The model was trained on a dataset of 663 deidentified computed tomography (CT) scans acquired in routine clinical practice and with both segmentations taken from clinical practice and segmentations created by experienced radiographers as part of this research, all in accordance with consensus OAR definitions. We demonstrate the model's clinical applicability by assessing its performance on a test set of 21 CT scans from clinical practice, each with the 21 OARs segmented by two independent experts. We also introduce surface Dice similarity coefficient (surface DSC), a new metric for the comparison of organ delineation, to quantify deviation between OAR surface contours rather than volumes, better reflecting the clinical task of correcting errors in the automated organ segmentations. The model's generalisability is then demonstrated on two distinct open source datasets, reflecting different centres and countries to model training. With appropriate validation studies and regulatory approvals, this system could improve the efficiency, consistency, and safety of radiotherapy pathways.
△ Less
Submitted 13 January, 2021; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Revealing the 3D Structure of Graphene Defects
Authors:
Christoph Hofer,
Christian Kramberger,
Mohammad Reza Ahmadpour Monazam,
Clemens Mangler,
Andreas Mittelberger,
Giacomo Argentero,
Jani Kotakoski,
Jannik C. Meyer
Abstract:
We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best pos…
▽ More
We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best possible match to the experimental images is found. We first demonstrate that this method works using an embedded defect in graphene that allows direct comparison to the computationally predicted three-dimensional shape. We then applied the method to a set of grain boundary structures with misorientation angles nearly spanning the whole available range (2.6-29.8°). The measured height variations at the boundaries reveal a strong correlation with the misorientation angle with lower angles resulting in stronger corrugation and larger kink angles. Our results allow for the first time a direct comparison with theoretical predictions for the corrugation at grain boundaries and we show that the measured kink angles are significantly smaller than the largest predicted ones.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Long-term monitoring of the internal energy distribution of isolated cluster systems
Authors:
Christian Breitenfeldt,
Klaus Blaum,
Sebastian George,
Jürgen Göck,
Gregorio Guzmán-Ramírez,
Jonas Karthein,
Thomas Kolling,
Michael Lange,
Sebastian Menk,
Christian Meyer,
Jennifer Mohrbach,
Gereon Niedner-Schatteburg,
Dirk Schwalm,
Lutz Schweikhard,
Andreas Wolf
Abstract:
A method is presented to monitor the internal energy distribution of cluster anions via delayed electron detachment by pulsed photoexcitation and demonstrated on Co$_4{}^-$ in an electrostatic ion beam trap. In cryogenic operation, we calibrate the detachment delay to internal energy. By laser frequency scans, at room temperature, we reconstruct the time-dependent internal energy distribution of t…
▽ More
A method is presented to monitor the internal energy distribution of cluster anions via delayed electron detachment by pulsed photoexcitation and demonstrated on Co$_4{}^-$ in an electrostatic ion beam trap. In cryogenic operation, we calibrate the detachment delay to internal energy. By laser frequency scans, at room temperature, we reconstruct the time-dependent internal energy distribution of the clusters. The mean energies of ensembles from a cold and a hot ion source both approach thermal equilibrium. Our data yield a radiative emission law and the absorptivity of the cluster for thermal radiation.
△ Less
Submitted 29 May, 2018;
originally announced May 2018.
-
Nanopore fabrication and characterization by helium ion microscopy
Authors:
D. Emmrich,
A. Beyer,
A. Nadzeyka,
S. Bauerdick,
J. C. Meyer,
J. Kotakoski,
A. Gölzhäuser
Abstract:
The Helium Ion Microscope (HIM) has the capability to image small features with a resolution down to 0.35 nm due to its highly focused gas field ionization source and its small beam-sample interaction volume. In this work, the focused helium ion beam of a HIM is utilized to create nanopores with diameters down to 1.3 nm. It will be demonstrated that nanopores can be milled into silicon nitride, ca…
▽ More
The Helium Ion Microscope (HIM) has the capability to image small features with a resolution down to 0.35 nm due to its highly focused gas field ionization source and its small beam-sample interaction volume. In this work, the focused helium ion beam of a HIM is utilized to create nanopores with diameters down to 1.3 nm. It will be demonstrated that nanopores can be milled into silicon nitride, carbon nanomembranes (CNMs) and graphene with well-defined aspect ratio. To image and characterize the produced nanopores, helium ion microscopy and high resolution scanning transmission electron microscopy were used. The analysis of the nanopore's growth behavior, allows inferring on the profile of the helium ion beam.
△ Less
Submitted 1 May, 2018;
originally announced May 2018.
-
Construction and Performance of the Barrel Electromagnetic Calorimeter for the GlueX Experiment
Authors:
Tegan Beattie,
Ahmed Foda,
Colleen Henschel,
S Katsaganis,
Shaun Krueger,
George Lolos,
Zisis Papandreou,
E. L. Plummer,
Irina Semenova,
Andrei Semenov,
Fernando Barbosa,
Eugene Chudakov,
Mark Dalton,
David Lawrence,
Yi Qiang,
Nicholas Sandoval,
Elton Smith,
Christopher Stanislav,
Justin Stevens,
Simon Taylor,
Timothy Whitlatch,
Benedikt Zihlmann,
William Levine,
William McGinley,
Curtis Meyer
, et al. (14 additional authors not shown)
Abstract:
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy d…
▽ More
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy deposited by charged and neutral particles created by a multi-GeV photon beam. It is constructed as a lead and scintillating-fiber calorimeter and read out with 3840 large-area silicon photomultiplier arrays. Particles im**e on the detector over a wide range of angles, from normal incidence at 90 degrees down to 11.5 degrees, which defines a geometry that is fairly unique among calorimeters. The response of the calorimeter has been measured during a running experiment and performs as expected for electromagnetic showers below 2.5 GeV. We characterize the performance of the BCAL using the energy resolution integrated over typical angular distributions for $π^0$ and $η$ production of $σ_E/E$=5.2\%/$\sqrt{E(\rm{GeV})} \oplus$ 3.6\% and a timing resolution of $σ$\,=\,150\,ps at 1\,GeV.
△ Less
Submitted 20 April, 2018; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Radiative rotational lifetimes and state-resolved relative detachment cross sections from photodetachment thermometry of molecular anions in a cryogenic storage ring
Authors:
C. Meyer,
A. Becker,
K. Blaum,
C. Breitenfeldt,
S. George,
J. Göck,
M. Grieser,
F. Grussie,
E. A. Guerin,
R. von Hahn,
P. Herwig,
C. Krantz,
H. Kreckel,
J. Lion,
S. Lohmann,
P. M. Mishra,
O. Novotný,
A. P. O'Connor,
R. Repnow,
S. Saurabh,
D. Schwalm,
L. Schweikhard,
K. Spruck,
S. Sunil Kumar,
S. Vogel
, et al. (1 additional authors not shown)
Abstract:
Photodetachment thermometry on a beam of OH$^-$ in a cryogenic storage ring cooled to below 10 K is carried out using two-dimensional, frequency and time dependent photodetachment spectroscopy over 20 minutes of ion storage. In equilibrium with the low-level blackbody field, we find an effective radiative temperature near 15 K with about 90% of all ions in the rotational ground state. We measure t…
▽ More
Photodetachment thermometry on a beam of OH$^-$ in a cryogenic storage ring cooled to below 10 K is carried out using two-dimensional, frequency and time dependent photodetachment spectroscopy over 20 minutes of ion storage. In equilibrium with the low-level blackbody field, we find an effective radiative temperature near 15 K with about 90% of all ions in the rotational ground state. We measure the J = 1 natural lifetime (about 193 s) and determine the OH$^-$ rotational transition dipole moment with 1.5% uncertainty. We also measure rotationally dependent relative near-threshold photodetachment cross sections for photodetachment thermometry.
△ Less
Submitted 16 July, 2017;
originally announced July 2017.
-
Single-particle detection of products from atomic and molecular reactions in a cryogenic ion storage ring
Authors:
C. Krantz,
O. Novotný,
A. Becker,
S. George,
M. Grieser,
R. von Hahn,
C. Meyer,
S. Schippers,
K. Spruck,
S. Vogel,
A. Wolf
Abstract:
We have used a single-particle detector system, based on secondary electron emission, for counting low-energetic (~keV/u) massive products originating from atomic and molecular ion reactions in the electrostatic Cryogenic Storage Ring (CSR). The detector is movable within the cryogenic vacuum chamber of CSR, and was used to measure production rates of a variety of charged and neutral daughter part…
▽ More
We have used a single-particle detector system, based on secondary electron emission, for counting low-energetic (~keV/u) massive products originating from atomic and molecular ion reactions in the electrostatic Cryogenic Storage Ring (CSR). The detector is movable within the cryogenic vacuum chamber of CSR, and was used to measure production rates of a variety of charged and neutral daughter particles. In operation at a temperature of ~6 K, the detector is characterised by a high dynamic range, combining a low dark event rate with good high-rate particle counting capability. On-line measurement of the pulse height distributions proved to be an important monitor of the detector response at low temperature. Statistical pulse-height analysis allows to infer the particle detection efficiency of the detector, which has been found to be close to unity also in cryogenic operation at 6 K.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Blade-shaped (PKN) Hydraulic Fracture Driven By A Turbulent Fluid In An Impermeable Rock
Authors:
Navid Zolfaghari,
Colin R. Meyer,
Andrew P. Bunger
Abstract:
High flow rate, water-driven hydraulic fractures are more common now than ever in the oil and gas industry. Although the fractures are small, the high injection rate and low viscosity of the water, lead to high Reynolds numbers and potentially turbulence in the fracture. Here we present a semi-analytical solution for a blade-shaped (PKN) geometry hydraulic fracture driven by a turbulent fluid in t…
▽ More
High flow rate, water-driven hydraulic fractures are more common now than ever in the oil and gas industry. Although the fractures are small, the high injection rate and low viscosity of the water, lead to high Reynolds numbers and potentially turbulence in the fracture. Here we present a semi-analytical solution for a blade-shaped (PKN) geometry hydraulic fracture driven by a turbulent fluid in the limit of zero fluid leak-off to the formation. We model the turbulence in the PKN fracture using the Gaukler-Manning-Strickler parametrization, which relates the the flow rate of the water to the pressure gradient along the fracture. The key parameter in this relation is the Darcy-Weisbach friction factor for the roughness of the crack wall. Coupling this turbulence parametrization with conservation of mass allows us to write a nonlinear pde for the crack width as a function of space and time. By way of a similarity ansatz, we obtain a semi-analytical solution using an orthogonal polynomial series. Embedding the asymptotic behavior near the fracture tip into the polynomial series, we find very rapid convergence: a suitably accurate solution is obtained with two terms of the series. This closed-form solution facilitates clear comparisons between the results and parameters for laminar and turbulent hydraulic fractures. In particular, it resolves one of the well known problems whereby calibration of models to data has difficulty simultaneously matching the hydraulic fracture length and wellbore pressure.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
Isotope analysis in the transmission electron microscope
Authors:
Toma Susi,
Christoph Hofer,
Giacomo Argentero,
Gregor T. Leuthner,
Timothy J. Pennycook,
Clemens Mangler,
Jannik C. Meyer,
Jani Kotakoski
Abstract:
The Ångström-sized probe of the scanning transmission electron microscope can visualize and collect spectra from single atoms. This can unambiguously resolve the chemical structure of materials, but not their isotopic composition. Here we differentiate between two isotopes of the same element by quantifying how likely the energetic imaging electrons are to eject atoms. First, we measure the displa…
▽ More
The Ångström-sized probe of the scanning transmission electron microscope can visualize and collect spectra from single atoms. This can unambiguously resolve the chemical structure of materials, but not their isotopic composition. Here we differentiate between two isotopes of the same element by quantifying how likely the energetic imaging electrons are to eject atoms. First, we measure the displacement probability in graphene grown from either $^{12}$C or $^{13}$C and describe the process using a quantum mechanical model of lattice vibrations coupled with density functional theory simulations. We then test our spatial resolution in a mixed sample by ejecting individual atoms from nanoscale areas spanning an interface region that is far from atomically sharp, map** the isotope concentration with a precision better than 20%. Although we use a scanning instrument, our method should be applicable to any atomic resolution transmission electron microscope and to other low-dimensional materials.
△ Less
Submitted 16 August, 2016;
originally announced August 2016.
-
The Cryogenic Storage Ring CSR
Authors:
Robert von Hahn,
Arno Becker,
Felix Berg,
Klaus Blaum,
Christian Breitenfeldt,
Hisham Fadil,
Florian Fellenberger,
Michael Froese,
Sebastian George,
Jürgen Göck,
Manfred Grieser,
Florian Grussie,
Elisabeth A. Guerin,
Oded Heber,
Philipp Herwig,
Jonas Karthein,
Claude Krantz,
Holger Kreckel,
Michael Lange,
Felix Laux,
Svenja Lohmann,
Sebastian Menk,
Christian Meyer,
Preeti M. Mishra,
Oldřich Novotný
, et al. (19 additional authors not shown)
Abstract:
An electrostatic cryogenic storage ring, CSR, for beams of anions and cations with up to 300 keV kinetic energy per unit charge has been designed, constructed and put into operation. With a circumference of 35 m, the ion-beam vacuum chambers and all beam optics are in a cryostat and cooled by a closed-cycle liquid helium system. At temperatures as low as (5.5 $\pm$ 1) K inside the ring, storage ti…
▽ More
An electrostatic cryogenic storage ring, CSR, for beams of anions and cations with up to 300 keV kinetic energy per unit charge has been designed, constructed and put into operation. With a circumference of 35 m, the ion-beam vacuum chambers and all beam optics are in a cryostat and cooled by a closed-cycle liquid helium system. At temperatures as low as (5.5 $\pm$ 1) K inside the ring, storage time constants of several minutes up to almost an hour were observed for atomic and molecular, anion and cation beams at an energy of 60 keV. The ion-beam intensity, energy-dependent closed-orbit shifts (dispersion) and the focusing properties of the machine were studied by a system of capacitive pickups. The Schottky-noise spectrum of the stored ions revealed a broadening of the momentum distribution on a time scale of 1000 s. Photodetachment of stored anions was used in the beam lifetime measurements. The detachment rate by anion collisions with residual-gas molecules was found to be extremely low. A residual-gas density below 140 cm$^{-3}$ is derived, equivalent to a room-temperature pressure below 10$^{-14}$ mbar. Fast atomic, molecular and cluster ion beams stored for long periods of time in a cryogenic environment will allow experiments on collision- and radiation-induced fragmentation processes of ions in known internal quantum states with merged and crossed photon and particle beams.
△ Less
Submitted 5 June, 2016;
originally announced June 2016.
-
First Results from The GlueX Experiment
Authors:
The GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. K. Brooks,
B. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
H. Egiyan,
P. Eugenio,
A. M. Foda,
J. Frye,
S. Furletov
, et al. (86 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and…
▽ More
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and $ω$ mesons. Linearly-polarized photons were successfully produced through coherent bremsstrahlung and polarization transfer to the $ρ$ has been observed.
△ Less
Submitted 14 January, 2016; v1 submitted 11 December, 2015;
originally announced December 2015.
-
Multimodal MRI Neuroimaging with Motion Compensation Based on Particle Filtering
Authors:
Yu-Hui Chen,
Roni Mittelman,
Boklye Kim,
Charles Meyer,
Alfred Hero
Abstract:
Head movement during scanning impedes activation detection in fMRI studies. Head motion in fMRI acquired using slice-based Echo Planar Imaging (EPI) can be estimated and compensated by aligning the images onto a reference volume through image registration. However, registering EPI images volume to volume fails to consider head motion between slices, which may lead to severely biased head motion es…
▽ More
Head movement during scanning impedes activation detection in fMRI studies. Head motion in fMRI acquired using slice-based Echo Planar Imaging (EPI) can be estimated and compensated by aligning the images onto a reference volume through image registration. However, registering EPI images volume to volume fails to consider head motion between slices, which may lead to severely biased head motion estimates. Slice-to-volume registration can be used to estimate motion parameters for each slice by more accurately representing the image acquisition sequence. However, accurate slice to volume map** is dependent on the information content of the slices: middle slices are information rich, while edge slides are information poor and more prone to distortion. In this work, we propose a Gaussian particle filter based head motion tracking algorithm to reduce the image misregistration errors. The algorithm uses a dynamic state space model of head motion with an observation equation that models continuous slice acquisition of the scanner. Under this model the particle filter provides more accurate motion estimates and voxel position estimates. We demonstrate significant performance improvement of the proposed approach as compared to registration-only methods of head motion estimation and brain activation detection.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Towards weighing individual atoms by high-angle scattering of electrons
Authors:
G. Argentero,
C. Mangler,
J. Kotakoski,
F. R. Eder,
J. C. Meyer
Abstract:
We consider theoretically the energy loss of electrons scattered to high angles when assuming that the primary beam can be limited to a single atom. We discuss the possibility of identifying the isotopes of light elements and of extracting information about phonons in this signal. The energy loss is related to the mass of the much heavier nucleus, and is spread out due to atomic vibrations. Import…
▽ More
We consider theoretically the energy loss of electrons scattered to high angles when assuming that the primary beam can be limited to a single atom. We discuss the possibility of identifying the isotopes of light elements and of extracting information about phonons in this signal. The energy loss is related to the mass of the much heavier nucleus, and is spread out due to atomic vibrations. Importantly, while the width of the broadening is much larger than the energy separation of isotopes, only the shift in the peak positions must be detected if the beam is limited to a single atom. We conclude that the experimental case will be challenging but is not excluded by the physical principles as far as considered here. Moreover, the initial experiments demonstrate the separation of gold and carbon based on a signal that is related to their mass, rather than their atomic number.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
Optimal Control of the Inhomogeneous Relativistic Maxwell Newton Lorentz Equations
Authors:
C. Meyer,
S. M. Schnepp,
O. Thoma
Abstract:
This note is concerned with an optimal control problem governed by the relativistic Maxwell-Newton-Lorentz equations, which describes the motion of charges particles in electro-magnetic fields and consists of a hyperbolic PDE system coupled with a nonlinear ODE. An external magnetic field acts as control variable. Additional control constraints are incorporated by introducing a scalar magnetic pot…
▽ More
This note is concerned with an optimal control problem governed by the relativistic Maxwell-Newton-Lorentz equations, which describes the motion of charges particles in electro-magnetic fields and consists of a hyperbolic PDE system coupled with a nonlinear ODE. An external magnetic field acts as control variable. Additional control constraints are incorporated by introducing a scalar magnetic potential which leads to an additional state equation in form of a very weak elliptic PDE. Existence and uniqueness for the state equation is shown and the existence of a global optimal control is established. Moreover, first-order necessary optimality conditions in form of Karush-Kuhn-Tucker conditions are derived. A numerical test illustrates the theoretical findings.
△ Less
Submitted 26 November, 2014;
originally announced November 2014.
-
A study of decays to strange final states with GlueX in Hall D using components of the BaBar DIRC
Authors:
The GlueX Collaboration,
M. Dugger,
B. Ritchie,
I. Senderovich,
E. Anassontzis,
P. Ioannou,
C. Kourkoumeli,
G. Vasileiadis,
G. Voulgaris,
N. Jarvis,
W. Levine,
P. Mattione,
W. McGinley,
C. A. Meyer,
R. Schumacher,
M. Staib,
F. Klein,
D. Sober,
N. Sparks,
N. Walford,
D. Doughty,
A. Barnes,
R. Jones,
J. McIntyre,
F. Mokaya
, et al. (82 additional authors not shown)
Abstract:
We propose to enhance the kaon identification capabilities of the GlueX detector by constructing an FDIRC (Focusing Detection of Internally Reflected Cherenkov) detector utilizing the decommissioned BaBar DIRC components. The GlueX FDIRC would significantly enhance the GlueX physics program by allowing one to search for and study hybrid mesons decaying into kaon final states. Such systematic studi…
▽ More
We propose to enhance the kaon identification capabilities of the GlueX detector by constructing an FDIRC (Focusing Detection of Internally Reflected Cherenkov) detector utilizing the decommissioned BaBar DIRC components. The GlueX FDIRC would significantly enhance the GlueX physics program by allowing one to search for and study hybrid mesons decaying into kaon final states. Such systematic studies of kaon final states are essential for inferring the quark flavor content of hybrid and conventional mesons. The GlueX FDIRC would reuse one-third of the synthetic fused silica bars that were utilized in the BaBar DIRC. A new focussing photon camera, read out with large area photodetectors, would be developed. We propose operating the enhanced GlueX detector in Hall D for a total of 220 days at an average intensity of 5x10^7 γ/s, a program that was conditionally approved by PAC39
△ Less
Submitted 1 August, 2014;
originally announced August 2014.
-
The ATLAS Tile Calorimeter Calibration and Performance
Authors:
Chris Meyer
Abstract:
A brief summary of the hadronic calorimeter calibration systems and performance results, in the ATLAS detector at the LHC is given.
A brief summary of the hadronic calorimeter calibration systems and performance results, in the ATLAS detector at the LHC is given.
△ Less
Submitted 10 October, 2013;
originally announced October 2013.
-
Rotational diffusion of particles in turbulence
Authors:
Colin R. Meyer,
Evan A. Variano
Abstract:
Through laboratory measurements, we compare the rotation of spherical and ellipsoidal particles in homogeneous, isotropic turbulence. We find that the particles' angular velocity statistics are well described by an Ornstein-Uhlenbeck (OU) process. This theoretical model predicts that the Lagrangian autocovariance of particles' angular velocity will decay exponentially. We measure the autocovarianc…
▽ More
Through laboratory measurements, we compare the rotation of spherical and ellipsoidal particles in homogeneous, isotropic turbulence. We find that the particles' angular velocity statistics are well described by an Ornstein-Uhlenbeck (OU) process. This theoretical model predicts that the Lagrangian autocovariance of particles' angular velocity will decay exponentially. We measure the autocovariance using stereoscopic particle image velocimetry (SPIV) applied to particles whose size is within the inertial subrange of the ambient turbulence. The SPIV resolves the motion of points interior to the particles, from which we calculate the solid body rotation of the particles. This provides us with the angular velocity time series for individual particles. Through ensemble statistics, we determine the autocovariance of angular velocity and confirm that it matches the form predicted by an OU process. We can further use the autocovariance curve to quantify the turbulent rotational diffusivity.
△ Less
Submitted 1 January, 2013;
originally announced January 2013.
-
The application of Graphene as a sample support in Transmission Electron Microscopy
Authors:
R. S. Pantelic,
J. C. Meyer,
U. Kaiser,
H. Stahlberg
Abstract:
Transmission electron microscopy has witnessed rampant development and surging point resolution over the past few years. The improved imaging performance of modern electron microscopes shifts the bottleneck for image contrast and resolution to sample preparation. Hence, it is increasingly being realized that the full potential of electron microscopy will only be realized with the optimization of c…
▽ More
Transmission electron microscopy has witnessed rampant development and surging point resolution over the past few years. The improved imaging performance of modern electron microscopes shifts the bottleneck for image contrast and resolution to sample preparation. Hence, it is increasingly being realized that the full potential of electron microscopy will only be realized with the optimization of current sample preparation techniques. Perhaps the most recognized issues are background signal and noise contributed by sample supports, sample charging and instability. Graphene provides supports of single atom thickness, extreme physical stability, periodic structure, and ballistic electrical conductivity. As an increasing number of applications adapting graphene to their benefit emerge, we discuss the unique capabilities afforded by the use of graphene as a sample support for electron microscopy.
△ Less
Submitted 30 April, 2012;
originally announced April 2012.
-
Mechanical properties of polycrystalline graphene based on a realistic atomistic model
Authors:
Jani Kotakoski,
Jannik C. Meyer
Abstract:
Graphene can at present be grown at large quantities only by the chemical vapor deposition method, which produces polycrystalline samples. Here, we describe a method for constructing realistic polycrystalline graphene samples for atomistic simulations, and apply it for studying their mechanical properties. We show that cracks initiate at points where grain boundaries meet and then propagate throug…
▽ More
Graphene can at present be grown at large quantities only by the chemical vapor deposition method, which produces polycrystalline samples. Here, we describe a method for constructing realistic polycrystalline graphene samples for atomistic simulations, and apply it for studying their mechanical properties. We show that cracks initiate at points where grain boundaries meet and then propagate through grains predominantly in zigzag or armchair directions, in agreement with recent experimental work. Contrary to earlier theoretical predictions, we observe normally distributed intrinsic strength (~ 50% of that of the mono-crystalline graphene) and failure strain which do not depend on the misorientation angles between the grains. Extrapolating for grain sizes above 15 nm results in a failure strain of ~ 0.09 and a Young's modulus of ~ 600 GPa. The decreased strength can be adequately explained with a conventional continuum model when the grain boundary meeting points are identified as Griffith cracks.
△ Less
Submitted 7 May, 2012; v1 submitted 19 March, 2012;
originally announced March 2012.
-
Efficient Implementation of ADER Schemes for Euler and Magnetohydrodynamical Flows on Structured Meshes -- Comparison with Runge-Kutta Methods
Authors:
Dinshaw S. Balsara,
Chad Meyer,
Michael Dumbser,
Hui**g Du,
Zhiliang Xu
Abstract:
ADER (Arbitrary DERivative in space and time) methods for the time-evolution of hyperbolic conservation laws have recently generated a fair bit of interest. The ADER time update can be carried out in a single step, which is desirable in many applications. However, prior papers have focused on the theory while downplaying implementation details. The purpose of the present paper is to make ADER sche…
▽ More
ADER (Arbitrary DERivative in space and time) methods for the time-evolution of hyperbolic conservation laws have recently generated a fair bit of interest. The ADER time update can be carried out in a single step, which is desirable in many applications. However, prior papers have focused on the theory while downplaying implementation details. The purpose of the present paper is to make ADER schemes accessible by providing two useful formulations of the method as well as their implementation details on three-dimensional structured meshes. We therefore provide a detailed formulation of ADER schemes for conservation laws with non-stiff source terms in nodal as well as modal space along with useful implementation-related detail. We also provide details for the efficient use of ADER schemes in obtaining the numerical flux for conservation laws as well as electric fields for divergence-free magnetohydrodynamics. An efficient WENO-based strategy for obtaining zone-averaged magnetic fields from face-centered magnetic fields in MHD is also presented.
The schemes catalogued here have been implemented in the first author's RIEMANN code. The speed of ADER schemes is shown to be almost twice as fast as that of strong stability preserving Runge-Kutta time step** schemes for all the orders of accuracy that we tested.
△ Less
Submitted 21 June, 2010; v1 submitted 10 June, 2010;
originally announced June 2010.
-
The GlueX Central Drift Chamber: Design and Performance
Authors:
Y. Van Haarlem,
C. A. Meyer,
F. Barbosa,
B. Dey,
D. Lawrence,
V. Razmyslovich,
E. Smith,
G. Visser,
T. Whitlatch,
G. Wilkin,
B. Zihlmann
Abstract:
Tests and studies concerning the design and performance of the GlueX Central Drift
Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo si…
▽ More
Tests and studies concerning the design and performance of the GlueX Central Drift
Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo simulation that can predict the detector response in an external magnetic field. Particle identification and charge division possibilities were also investigated.
△ Less
Submitted 21 April, 2010;
originally announced April 2010.
-
An Ad-Hoc Method for Obtaining chi**2 Values from Unbinned Maximum Likelihood Fits
Authors:
M. Williams,
C. A. Meyer
Abstract:
A common goal in an experimental physics analysis is to extract information from a reaction with multi-dimensional kinematics. The preferred method for such a task is typically the unbinned maximum likelihood method. In fits using this method, the likelihood is a goodness-of-fit quantity in that it effectively discriminates between available hypotheses; however, it does not provide any informati…
▽ More
A common goal in an experimental physics analysis is to extract information from a reaction with multi-dimensional kinematics. The preferred method for such a task is typically the unbinned maximum likelihood method. In fits using this method, the likelihood is a goodness-of-fit quantity in that it effectively discriminates between available hypotheses; however, it does not provide any information as to how well the best hypothesis describes the data.
In this paper, we present an {\em ad-hoc} procedure for obtaining chi**2/n.d.f. values from unbinned maximum likelihood fits. This method does not require binning the data, making it very applicable to multi-dimensional problems.
△ Less
Submitted 2 July, 2008; v1 submitted 30 June, 2008;
originally announced July 2008.
-
Separating Signals from Non-Interfering Backgrounds using Probabilistic Event Weightings
Authors:
M. Williams,
M. Bellis,
C. A. Meyer
Abstract:
A common situation in experimental physics is to have a signal which can not be separated from a non-interfering background through the use of any cut. In this paper, we describe a procedure for determining, on an event-by-event basis, a quality factor (Q-factor) that a given event originated from the signal distribution. This Q-factor can then be used as an event weight in subsequent analysis p…
▽ More
A common situation in experimental physics is to have a signal which can not be separated from a non-interfering background through the use of any cut. In this paper, we describe a procedure for determining, on an event-by-event basis, a quality factor (Q-factor) that a given event originated from the signal distribution. This Q-factor can then be used as an event weight in subsequent analysis procedures, allowing one to more directly access the true spectrum of the signal.
△ Less
Submitted 21 April, 2008;
originally announced April 2008.
-
Simulation of an All-Silicon Tracker
Authors:
Chris Meyer,
Tyler Rice,
Lori Stevens,
Bruce A. Schumm
Abstract:
We present recent improvements in the performance of the reconstruction of non-prompt track in the SiD Detector Concept Design, including initial results on the effect of longitudinal segmentation in the SiD tracker. We also describe a generic tracking validation package developed at SCIPP.
We present recent improvements in the performance of the reconstruction of non-prompt track in the SiD Detector Concept Design, including initial results on the effect of longitudinal segmentation in the SiD tracker. We also describe a generic tracking validation package developed at SCIPP.
△ Less
Submitted 5 September, 2007;
originally announced September 2007.