Showing 1–17 of 17 results for author: Menyuk, C R

Optimal dimensions of cone and pyramid moth-eye structures for $\mathrm{SiO}_{2}$ windows

Authors: Chaoran Tu, Jonathan Hu, Curtis R. Menyuk, Thomas F. Carruthers, L. Brandon Shaw, Lynda E. Busse, Jasbinder S. Sanghera

Abstract: We computationally investigate the transmission efficiency through moth-eye nanostructures that are fabricated on $\mathrm{SiO}_{2}$ windows in the wavelength range from 0.4 to 2 $\mathrm{μm}$. We investigated both truncated cones and truncated pyramids, and we varied the height, bottom width, and top width of these shapes in order to maximize the transmission efficiency. We found that there is no… ▽ More We computationally investigate the transmission efficiency through moth-eye nanostructures that are fabricated on $\mathrm{SiO}_{2}$ windows in the wavelength range from 0.4 to 2 $\mathrm{μm}$. We investigated both truncated cones and truncated pyramids, and we varied the height, bottom width, and top width of these shapes in order to maximize the transmission efficiency. We found that there is no substantial difference in transmission between truncated cone and pyramid structures. Using the constraints from the current achievable experimental limits, a relatively uniform transmission coefficient of larger than 98.8% can be obtained from 0.4 $\mathrm{μm}$ to 2 $\mathrm{μm}$. These transmission results are only 0.4% in absolute value lower than the transmission of a structure that is not constrained by current experimental limits. △ Less

Submitted 24 June, 2023; originally announced June 2023.

Accurate and Efficient Modeling of the Transverse Mode Instability in High Energy Laser Amplifiers

Authors: Curtis R. Menyuk, Joshua T. Young, Jonathan Hu, Andy J. Goers, David M. Brown, Michael L. Dennis

Abstract: We study the transverse mode instability (TMI) in the limit where a single higher-order mode (HOM) is present. We demonstrate that when the beat length between the fundamental mode and the HOM is small compared to the length scales on which the pump amplitude and the optical mode amplitudes vary, TMI is a three-wave mixing process in which the two optical modes beat with the phase-matched componen… ▽ More We study the transverse mode instability (TMI) in the limit where a single higher-order mode (HOM) is present. We demonstrate that when the beat length between the fundamental mode and the HOM is small compared to the length scales on which the pump amplitude and the optical mode amplitudes vary, TMI is a three-wave mixing process in which the two optical modes beat with the phase-matched component of the index of refraction that is induced by the thermal grating. This limit is the usual limit in applications, and in this limit TMI is identified as a stimulated thermal Rayleigh scattering (STRS) process. We demonstrate that a phase-matched model that is based on the three-wave mixing equations can have a large computational advantage over current coupled mode methods that must use longitudinal step sizes that are small compared to the beat length. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Thermal instabilities, frequency comb formation, and temporal oscillations in Kerr microresonators

Authors: Amir Leshem, Zhen Qi, Thomas F. Carruthers, Curtis R. Menyuk, Omri Gat

Abstract: We analyze the consequences of dissipative heating in driven Kerr microresonators theoretically and numerically, using a thermal Lugiato-Lefever model. We show that thermal sensitivity modifies the stability range of continuous wave in a way that blocks direct access to broadband frequency-comb forming waveforms, and we propose a deterministic access path that bypasses the thermal instability barr… ▽ More We analyze the consequences of dissipative heating in driven Kerr microresonators theoretically and numerically, using a thermal Lugiato-Lefever model. We show that thermal sensitivity modifies the stability range of continuous wave in a way that blocks direct access to broadband frequency-comb forming waveforms, and we propose a deterministic access path that bypasses the thermal instability barrier. We describe a novel thermal instability that leads to thermooptical oscillations via a Hopf bifurcation. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Comments: 21 pages, 5 figures, submitted to PRA

Journal ref: Phys. Rev. A 103, 013512 (2021)

Mechanisms of Spatiotemporal Mode-Locking

Authors: Logan G. Wright, Pavel Sidorenko, Hamed Pourbeyram, Zachary M. Ziegler, Andrei Isichenko, Boris A. Malomed, Curtis R. Menyuk, Demetrios N. Christodoulides, Frank W. Wise

Abstract: Mode-locking is a process in which different modes of an optical resonator establish, through nonlinear interactions, stable synchronization. This self-organization underlies light sources that enable many modern scientific applications, such as ultrafast and high-field optics and frequency combs. Despite this, mode-locking has almost exclusively referred to self-organization of light in a single… ▽ More Mode-locking is a process in which different modes of an optical resonator establish, through nonlinear interactions, stable synchronization. This self-organization underlies light sources that enable many modern scientific applications, such as ultrafast and high-field optics and frequency combs. Despite this, mode-locking has almost exclusively referred to self-organization of light in a single dimension - time. Here we present a theoretical approach, attractor dissection, for understanding three-dimensional (3D) spatiotemporal mode-locking (STML). The key idea is to find, for each distinct type of 3D pulse, a specific, minimal reduced model, and thus to identify the important intracavity effects responsible for its formation and stability. An intuition for the results follows from the 'minimum loss principle,' the idea that a laser strives to find the configuration of intracavity light that minimizes loss (maximizes gain extraction). Through this approach, we identify and explain several distinct forms of STML. These novel phases of coherent laser light have no analogues in 1D and are supported by experimental measurements of the three-dimensional field, revealing STML states comprising more than $10^7$ cavity modes. Our results should facilitate the discovery and understanding of new higher-dimensional forms of coherent light which, in turn, may enable new applications. △ Less

Submitted 21 November, 2019; originally announced November 2019.

Dissipative cnoidal waves (Turing rolls) and the soliton limit in microring resonators

Authors: Zhen Qi, Shaokang Wang, José Jaramillo-Villegas, Minghao Qi, Andrew M. Weiner, Giuseppe D'Aguanno, Thomas F. Carruthers, Curtis R. Menyuk

Abstract: Single solitons are a special limit of more general waveforms commonly referred to as cnoidal waves or Turing rolls. We theoretically and computationally investigate the stability and accessibility of cnoidal waves in microresonators. We show that they are robust and, in contrast to single solitons, can be easily and deterministically accessed in most cases. Their bandwidth can be comparable to si… ▽ More Single solitons are a special limit of more general waveforms commonly referred to as cnoidal waves or Turing rolls. We theoretically and computationally investigate the stability and accessibility of cnoidal waves in microresonators. We show that they are robust and, in contrast to single solitons, can be easily and deterministically accessed in most cases. Their bandwidth can be comparable to single solitons, in which limit they are effectively a periodic train of solitons and correspond to a frequency comb with increased power. We comprehensively explore the three-dimensional parameter space that consists of detuning, pump amplitude, and mode circumference in order to determine where stable solutions exist. To carry out this task, we use a unique set of computational tools based on dynamical system theory that allow us to rapidly and accurately determine the stable region for each cnoidal wave periodicity and to find the instability mechanisms and their time scales. Finally, we focus on the soliton limit, and we show that the stable region for single solitons almost completely overlaps the stable region for both continuous waves and several higher-periodicity cnoidal waves that are effectively multiple soliton trains. This result explains in part why it is difficult to access single solitons deterministically. △ Less

Submitted 27 May, 2019; v1 submitted 16 May, 2019; originally announced May 2019.

Non-covalent bonds between optical solitons in an optoacoustically mode-locked fiber laser: Analysis & modelling

Authors: W. He, M. Pang, D. H. Yeh, J. Huang, C. R. Menyuk, P. St. J. Russell

Abstract: Binding of particles through weak (non-covalent) interactions plays a central role in multiple modern disciplines, from Cooper pairing of electrons in superconductivity to formation of supramolecules in biochemistry. Optical solitons, which are analogous in many ways to particles, arise from a balance between nonlinearity and dispersion and have only been known to be able to form molecule-like, lo… ▽ More Binding of particles through weak (non-covalent) interactions plays a central role in multiple modern disciplines, from Cooper pairing of electrons in superconductivity to formation of supramolecules in biochemistry. Optical solitons, which are analogous in many ways to particles, arise from a balance between nonlinearity and dispersion and have only been known to be able to form molecule-like, localized structures through covalent interactions due to direct overlap**. Non-covalent binding of optical solitons that based on long-rang interactions have, however, so far escaped experimental observations. Long-range interactions between optical solitons have proven almost impossible to control, generally leading to disorder. In this paper, however we show that by tailoring weak, long-range soliton interactions, a large population of optical solitons in an optoacoustic mode-locking fiber laser can assemble into stable, highly-ordered structures that resemble biochemical supramolecules. We demonstrate here a theoretical model of the non-covalent binding mechanism, and provide some experimental results supporting this model. △ Less

Submitted 27 July, 2018; originally announced August 2018.

Comments: arXiv admin note: substantial text overlap with arXiv:1710.01034

Efficiently Modeling the Noise Performance of Short-Pulse Lasers with a Computational Implementation of Dynamical Methods

Authors: Shaokang Wang, Thomas F. Carruthers, Curtis R. Menyuk

Abstract: Lowering the noise level of short pulse lasers has been a long-standing effort for decades. Modeling the noise performance plays a crucial role in isolating the noise sources and reducing them. Modeling to date has either used analytical or semi-analytical implementation of dynamical methods or Monte Carlo simulations. The former approach is too simplified to accurately assess the noise performanc… ▽ More Lowering the noise level of short pulse lasers has been a long-standing effort for decades. Modeling the noise performance plays a crucial role in isolating the noise sources and reducing them. Modeling to date has either used analytical or semi-analytical implementation of dynamical methods or Monte Carlo simulations. The former approach is too simplified to accurately assess the noise performance in real laser systems, while the latter approach is too computationally slow to optimize the performance as parameters vary over a wide range. Here, we describe a computational implementation of dynamical methods that allows us to determine the noise performance of a passively modelocked laser within minutes on a desktop computer and is faster than Monte Carlo methods by a factor on the order of 1000. We apply this method to characterize a laser that is locked using a fast saturable absorber---for example, a fiber-based nonlinear polarization rotation---and a laser that is locked using a slow saturable absorber---for example, a semiconductor saturable absorbing mirror. △ Less

Submitted 27 May, 2018; originally announced June 2018.

Comments: 32 pages, 4 figures

Supramolecular transmission of soliton-encoded bit streams over astronomical distances

Authors: W. He, M. Pang, D. H. Yeh, J. Huang, C. R. Menyuk, P. St. J. Russell

Abstract: A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse inter… ▽ More A stream of optical pulses, transmitted over long distances in optical fiber, will be affected by a variety of noise sources, leading to degradation in the signal-to-noise ratio. This noise accumulation sets generic capacity limits of all fiber-based optical signal transmission systems and has long been regarded as unavoidable. We report that by tailoring long-range, non-covalent inter-pulse interactions, optical solitons in a fiber laser loop can robustly couple to each other and self-assemble into supramolecular structures that exhibit long-term stability, elementary diversity and the possibility of information encoding. We demonstrate error-free transmission of such self-assembled solitonic structures over many astronomical units without any active retiming, opening up the possibility of using bit-bit interactions to overcome noise accumulation in optical fiber telecommunications and bit-storage systems. △ Less

Submitted 31 July, 2018; v1 submitted 3 October, 2017; originally announced October 2017.

Comments: 19 pages, 3 figures in main text, 7 figures in supplementary information

Coupled Lugiato-Lefever equation for nonlinear frequency comb generation at an avoided crossing of a microresonator

Authors: Giuseppe D'Aguanno, Curtis R. Menyuk

Abstract: Guided-mode coupling in a microresonator generally manifests itself through avoided crossings of the corresponding resonances. This coupling can strongly modify the resonator local effective dispersion by creating two branches that have dispersions of opposite sign in spectral regions that would otherwise be characterized by either positive (normal) or negative (anomalous) dispersion. In this pape… ▽ More Guided-mode coupling in a microresonator generally manifests itself through avoided crossings of the corresponding resonances. This coupling can strongly modify the resonator local effective dispersion by creating two branches that have dispersions of opposite sign in spectral regions that would otherwise be characterized by either positive (normal) or negative (anomalous) dispersion. In this paper, we study, both analytically and computationally, the general properties of nonlinear frequency comb generation at an avoided crossing using the coupled Lugiato-Lefever equation. In particular, we find that bright solitons and broadband frequency combs can be excited when both branches are pumped for a suitable choice of the pump powers and the detuning parameters. A deterministic path for soliton generation is found. △ Less

Submitted 5 March, 2017; originally announced March 2017.

Comments: 9 pages, 5 figures

Computational Study of Amplitude-to-Phase Conversion in a Modified Uni-Traveling Carrier (MUTC) Photodetector

Authors: Yue Hu, Curtis R. Menyuk, Xiaojun Xie, Meredith N. Hutchinson, Vincent J. Urick, Joe C. Campbell, Keith J. Williams

Abstract: We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent vari… ▽ More We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent varies. We also show that the AM-to-PM conversion coefficient depends only on the pulse energy and is independent of the pulse duration when the duration is less than 500 fs. When the pulse duration is larger than 500 fs, the nulls of the AM-to-PM conversion coefficient shift to larger average photocurrents. This shift occurs because the increase in that pulse duration leads to a decrease in the peak photocurrent. The AM-to-PM noise conversion coefficient changes as the repetition rate varies. However, the repetition rate does not change the AM-to-PM conversion coefficient as a function of input optical pulse energy. The repetition rate changes the average photocurrent. We propose a design that would in theory improve the performance of the device. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Comments: 10 pages

Comparison of Models of Fast Saturable Absorption in Passively Modelocked Lasers

Authors: Shaokang Wang, Brian S. Marks, Curtis R. Menyuk

Abstract: Fast saturable absorbers (FSAs) play a critical role in stabilizing many passively modelocked lasers. The most commonly used averaged model to study these lasers is the Haus modelocking equation (HME) that includes a third-order nonlinear FSA. However, it predicts a narrow region of stability that is inconsistent with experiments. To better replicate the laser physics, averaged laser models that i… ▽ More Fast saturable absorbers (FSAs) play a critical role in stabilizing many passively modelocked lasers. The most commonly used averaged model to study these lasers is the Haus modelocking equation (HME) that includes a third-order nonlinear FSA. However, it predicts a narrow region of stability that is inconsistent with experiments. To better replicate the laser physics, averaged laser models that include FSAs with higher-than-third-order nonlinearities have been introduced. Here, we compare three common FSA models to each other and to the HME using the recently-developed boundary tracking algorithms. The three FSA models are the cubic-quintic model, the sinusoidal model, and the algebraic model. We find that all three models predict the existence of a stable high-energy solution that is not present in the HME and have a much larger stable operating region. We also find that all three models predict qualitatively similar stability diagrams. We conclude that averaged laser models that include FSAs with higher-than-third-order nonlinearity should be used when studying the stability of passively modelocked lasers. △ Less

Submitted 13 July, 2016; originally announced July 2016.

Comments: 17 pages, 10 figures

Nonlinear Stabilization of High-Energy and Ultrashort Pulses in Passively Modelocked Lasers with Fast Saturable Absorption

Authors: Shaokang Wang, Brian S. Marks, Curtis R. Menyuk

Abstract: The two most commonly used models for passively modelocked lasers with fast saturable absorbers are the Haus modelocking equation (HME) and the cubic-quintic modelocking equation (CQME). The HME corresponds to a special limit of the CQME in which only a cubic nonlinearity in the fast saturable absorber is kept in the model. Here, we use singular perturbation theory to demonstrate that the CQME has… ▽ More The two most commonly used models for passively modelocked lasers with fast saturable absorbers are the Haus modelocking equation (HME) and the cubic-quintic modelocking equation (CQME). The HME corresponds to a special limit of the CQME in which only a cubic nonlinearity in the fast saturable absorber is kept in the model. Here, we use singular perturbation theory to demonstrate that the CQME has a stable high-energy solution for an arbitrarily small but non-zero quintic contribution to the fast saturable absorber. As a consequence, we find that the CQME predicts the existence of stable modelocked pulses when the cubic nonlinearity is orders of magnitude larger than the value at which the HME predicts that modelocked pulses become unstable. This intrinsically larger stability range is consistent with experiments. Our results suggest a possible path to obtain high-energy and ultrashort pulses by fine tuning the higher-order nonlinear terms in the fast saturable absorber. △ Less

Submitted 11 July, 2016; originally announced July 2016.

Comments: 8 pages, 6 figures, submitted to PRA

Nonlinear mode coupling in whispering-gallery-mode resonators

Authors: Giuseppe D'Aguanno, Curtis R. Menyuk

Abstract: We present a first principle derivation of the coupled nonlinear Schrödinger equations that govern the interaction between two families of modes with different transverse profiles in a generic whispering-gallery-mode resonator. We find regions of modulational instability and the existence of trains of bright solitons both in the normal and in the anomalous dispersion regime. We present a first principle derivation of the coupled nonlinear Schrödinger equations that govern the interaction between two families of modes with different transverse profiles in a generic whispering-gallery-mode resonator. We find regions of modulational instability and the existence of trains of bright solitons both in the normal and in the anomalous dispersion regime. △ Less

Submitted 4 April, 2016; originally announced April 2016.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. A 93, 043820 (2016)

Superlinear growth of Rayleigh scattering-induced intensity noise in single-mode fibers

Authors: James P. Cahill, Olukayode Okusaga, Weimin Zhou, Curtis R. Menyuk, Gary M. Carter

Abstract: Rayleigh scattering generates intensity noise close to an optical carrier that propagates in a single-mode optical fiber. This noise degrades the performance of optoelectronic oscillators and RF-photonic links. When using a broad linewidth laser, we previously found that the intensity noise power scales linearly with optical power and fiber length, which is consistent with guided entropy mode Rayl… ▽ More Rayleigh scattering generates intensity noise close to an optical carrier that propagates in a single-mode optical fiber. This noise degrades the performance of optoelectronic oscillators and RF-photonic links. When using a broad linewidth laser, we previously found that the intensity noise power scales linearly with optical power and fiber length, which is consistent with guided entropy mode Rayleigh scattering (GEMRS), a third order nonlinear scattering process, in the spontaneous limit. In this work, we show that this behavior changes significantly with the use of a narrow linewidth laser. Using a narrow linewidth laser, we measured the bandwidth of the intensity noise plateau to be 10 kHz. We found that the scattered noise power scales superlinearly with fiber length up to lengths of 10 km in the frequency range of 500 Hz to 10 kHz, while it scales linearly in the frequency range of 10 Hz to 100 Hz. These results suggest that the Rayleigh-scattering-induced intensity noise cannot be explained by third-order nonlinear scattering in the spontaneous limit, as previously hypothesized. △ Less

Submitted 18 March, 2015; v1 submitted 5 January, 2015; originally announced January 2015.

Comments: This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OE.23.006400. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law

Journal ref: Optics Express, Vol. 23, Issue 5, pp. 6400-6407 (2015)

Spatiotemporal Model for Kerr Comb Generation in Whispering Gallery Mode Resonators

Authors: Yanne K. Chembo, Curtis R. Menyuk

Abstract: We establish an exact partial differential equation to model Kerr comb generation in whispering-gallery mode resonators. This equation is a variant of the Lugiato-Lefever equation that includes higher-order dispersion and nonlinearity. This spatio-temporal model, whose main variable is the total intracavity field, is significantly more suitable than the modal expansion approach for the theoretical… ▽ More We establish an exact partial differential equation to model Kerr comb generation in whispering-gallery mode resonators. This equation is a variant of the Lugiato-Lefever equation that includes higher-order dispersion and nonlinearity. This spatio-temporal model, whose main variable is the total intracavity field, is significantly more suitable than the modal expansion approach for the theoretical understanding and the numerical simulation of wide-span combs. It allows us to explore pulse formation in which a large number of modes interact cooperatively. This versatile approach can be straightforwardly extended to include higher-order dispersion, as well as other phenomena like Raman, Brillouin and Rayleigh scattering. We demonstrate for the first time that when the dispersion is anomalous, Kerr comb generation can arise as the spectral signature of dissipative cavity solitons, leading to wide-span combs with low pum**. △ Less

Submitted 30 October, 2012; originally announced October 2012.

Comments: 5 pages, 2 figures

The quantum-limited comb lineshape of a mode-locked laser: Fundamental limits on frequency uncertainty

Authors: J. K. Wahlstrand, J. T. Willits, C. R. Menyuk, S. T. Cundiff

Abstract: We calculate the quantum-limited shape of the comb lines from a mode-locked Ti:sapphire laser using experimentally-derived parameters for the linear response of the laser to perturbations. The free-running width of the comb lines is found across the laser spectrum. By modeling the effect of a simple feedback loop, we calculate the spectrum of the residual phase noise in terms of the quantum nois… ▽ More We calculate the quantum-limited shape of the comb lines from a mode-locked Ti:sapphire laser using experimentally-derived parameters for the linear response of the laser to perturbations. The free-running width of the comb lines is found across the laser spectrum. By modeling the effect of a simple feedback loop, we calculate the spectrum of the residual phase noise in terms of the quantum noise and the feedback parameters. Finally, we calculate the frequency uncertainty in an optical frequency measurement if the limiting factor is quantum noise in the detection of the optical heterodyne beat. △ Less

Submitted 25 July, 2008; originally announced July 2008.

Comments: 6 pages, 2 figures

Solutions to the Optical Cascading Equations

Authors: S. Lafortune, P. Winternitz, C. R. Menyuk

Abstract: Group theoretical methods are used to study the equations describing χ^{(2)}:χ^{(2)} cascading. The equations are shown not to be integrable by inverse scattering techniques. On the other hand, these equations do share some of the nice properties of soliton equations. Large families of explicit analytical solutions are obtained in terms of elliptic functions. In special cases, these periodic sol… ▽ More Group theoretical methods are used to study the equations describing χ^{(2)}:χ^{(2)} cascading. The equations are shown not to be integrable by inverse scattering techniques. On the other hand, these equations do share some of the nice properties of soliton equations. Large families of explicit analytical solutions are obtained in terms of elliptic functions. In special cases, these periodic solutions reduce to localized ones, i.e., solitary waves. All previously known explicit solutions are recovered, and many additional ones are obtained △ Less

Submitted 11 December, 1998; originally announced December 1998.

Comments: 21 pages

Journal ref: Physical Review E 58, 2518-2825 (1998)