-
VSHPIC: A Particle-In-Cell Algorithm Based On Vector Spherical Harmonics Expansion
Authors:
Jianzhao Wang,
Weiming An,
Rong Tang,
Weiyu Meng,
Jiayong Zhong
Abstract:
The Particle-in-Cell (PIC) simulation has been a widely used method for studying plasma physics. However, fully three-dimensional PIC simulations always require huge computational resources. For problems with near azimuthal symmetry, recent work has shown that expanding all the quantities defined on the grid in azimuthal harmonics and truncating the expansion can improve the code efficiency. In th…
▽ More
The Particle-in-Cell (PIC) simulation has been a widely used method for studying plasma physics. However, fully three-dimensional PIC simulations always require huge computational resources. For problems with near azimuthal symmetry, recent work has shown that expanding all the quantities defined on the grid in azimuthal harmonics and truncating the expansion can improve the code efficiency. In this paper, we describe a novel parallel algorithm for efficiently simulating three-dimensional near-spherical symmetry problems. Our approach expands all physical quantities in the $θ$ and $φ$ directions in spherical coordinates using vector spherical harmonics. The code is capable of simulating three-dimensional asymmetric scenarios by accurately tracking the evolution of distinct individual modes while preserving the charge conservation law. The fundamental dispersion relation of EM waves in the plasma has been obtained using VSHPIC simulation results. The code also shows a well strong scalability up to more than 1000 cores.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Numerical simulation of flow field and debris migration in extreme ultraviolet source vessel
Authors:
Wen-Sheng Meng,
Chao-Ben Zhao,
Jian-Zhao Wu,
Bo-Fu Wang,
Quan Zhou,
Kai Leong Chong
Abstract:
Practical extreme ultraviolet (EUV) sources yield the desired 13.5 nm radiation but also generate debris, significantly limiting the lifespan of the collector mirror in lithography. In this study, we explore the role of buffer gas in transporting debris particles within a EUV source vessel using direct numerical simulations (DNS). Our study involves a 2m $\times$ 1m $\times$ 1m rectangular cavity…
▽ More
Practical extreme ultraviolet (EUV) sources yield the desired 13.5 nm radiation but also generate debris, significantly limiting the lifespan of the collector mirror in lithography. In this study, we explore the role of buffer gas in transporting debris particles within a EUV source vessel using direct numerical simulations (DNS). Our study involves a 2m $\times$ 1m $\times$ 1m rectangular cavity with an injecting jet flow subjected to sideward outlet. Debris particles are introduced into the cavity with specified initial velocities, simulating a spherical radiating pattern with particle diameters ranging from 0.1 $μ$m to 1 $μ$m. Varying the inflow velocity (from $1$m/s to $50$m/s) of the buffer gas reveals a morphological transition in the flow field. At low inflow velocities, the flow remains steady, whereas higher inflow velocities induce the formation of clustered corner rolls. Upon reaching sufficiently high inflow velocities, the jet flow can penetrate the entire cavity, impacting the endwall. Interestingly, the resulting recirculation flow leads to the spontaneous formation of spiraling outflow. The distinct flow structures at various inflow velocities lead to distinct patterns of particle transport. For low-speed gas, it is efficient in expelling all particles smaller than 0.4 $μ$m, while for high-speed gas, those fine particles accumulate near the endwall and are challenging to be extracted. Our findings highlight the significance of controlling flow conditions for effective debris particle transport and clearance in diverse applications especially in EUV source vessels.
△ Less
Submitted 6 December, 2023; v1 submitted 4 December, 2023;
originally announced December 2023.
-
Growth and applications of two-dimensional single crystals
Authors:
Zhibin Zhang,
Stiven Forti,
Wanqing Meng,
Sergio Pezzini,
Zehua Hu,
Camilla Coletti,
Xinran Wang,
Kaihui Liu
Abstract:
Two-dimensional (2D) materials have received extensive research attentions over the past two decades due to their intriguing physical properties (such as the ultrahigh mobility and strong light-matter interaction at atomic thickness) and a broad range of potential applications (especially in the fields of electronics and optoelectronics). The growth of single-crystal 2D materials is the prerequisi…
▽ More
Two-dimensional (2D) materials have received extensive research attentions over the past two decades due to their intriguing physical properties (such as the ultrahigh mobility and strong light-matter interaction at atomic thickness) and a broad range of potential applications (especially in the fields of electronics and optoelectronics). The growth of single-crystal 2D materials is the prerequisite to realize 2D-based high-performance applications. In this review, we aim to provide an in-depth analysis of the state-of-the-art technology for the growth and applications of 2D materials, with particular emphasis on single crystals. We first summarize the major growth strategies for monolayer 2D single crystals. Following that, we discuss the growth of multilayer single crystals, including the control of thickness, stacking sequence, and heterostructure composition. Then we highlight the exploration of 2D single crystals in electronic and optoelectronic devices. Finally, a perspective is given to outline the research opportunities and the remaining challenges in this field.
△ Less
Submitted 13 October, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Fast localization and single-pixel imaging of the moving object using time-division multiplexing
Authors:
Zijun Guo,
Wenwen Meng,
Dongfeng Shi,
Linbin Zha,
Wei Yang,
Jian Huang,
Yafeng Chen,
Yingjian Wang
Abstract:
When imaging moving objects, single-pixel imaging produces motion blur. This paper proposes a new single-pixel imaging method, which can achieve anti-motion blur imaging of a fast-moving object. The geometric moment patterns and Hadamard patterns are used to alternately encode the position information and the image information of the object with time-division multiplexing. In the reconstruction pr…
▽ More
When imaging moving objects, single-pixel imaging produces motion blur. This paper proposes a new single-pixel imaging method, which can achieve anti-motion blur imaging of a fast-moving object. The geometric moment patterns and Hadamard patterns are used to alternately encode the position information and the image information of the object with time-division multiplexing. In the reconstruction process, the object position information is extracted independently and combining motion-compensation reconstruction algorithm to decouple the object motion from image information. As a result, the anti-motion blur image and the high frame rate object positions are obtained. Experimental results show that for a moving object with an angular velocity of up to 0.5rad/s relative to the imaging system, the proposed method achieves a localization frequency of 5.55kHz, and gradually reconstructs a clear image of the fast-moving object with a pseudo resolution of 512x512. The method has application prospects in single-pixel imaging of the fast-moving object.
△ Less
Submitted 14 August, 2022;
originally announced August 2022.
-
Observation of the toroidal rotation in a new designed compact torus system for EAST
Authors:
Z. H. Zhao,
T. Lan,
D. F. Kong,
Y. Ye,
S. B. Zhang,
G. Zhuang,
X. H. Zhang,
G. H. Hu,
C. Chen,
J. Wu,
S. Zhang,
M. B. Qi,
C. H. Li,
X. M. Yang,
L. Y. Nie,
F. Wen,
P. F. Zi,
L. Li,
F. W. Meng,
B. Li,
Q. L. Dong,
Y. Q. Huang
Abstract:
Compact torus injection is considered as a high promising approach to realize central fueling in the future tokamak device. Recently, a compact torus injection system has been developed for the Experimental Advanced Superconducting Tokamak, and the preliminary results have been carried out. In the typical discharges of the early stage, the velocity, electron density and particles number of the CT…
▽ More
Compact torus injection is considered as a high promising approach to realize central fueling in the future tokamak device. Recently, a compact torus injection system has been developed for the Experimental Advanced Superconducting Tokamak, and the preliminary results have been carried out. In the typical discharges of the early stage, the velocity, electron density and particles number of the CT can reach 56.0 km/s, 8.73*10^20 m^(-3) and 2.4*10^18 (for helium), respectively. A continuous increase in CT density during acceleration was observed in the experiment, which may be due to the plasma ionized in the formation region may carry part of the neutral gas into the acceleration region, and these neutral gases will be ionized again. In addition, a significant plasma rotation is observed during the formation process which is introduced by the E*B drift. In this paper, we present the detailed system setup and the preliminary platform test results, ho** to provide some basis for the exploration of the CT technique medium-sized superconducting tokamak device in the future
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Multiple-Fold Fermions and Topological Fermi Arcs Induced Catalytic Enhancement in Nanoporous Electride C12A7
Authors:
Weizhen Meng,
Xiaoming Zhang,
Ying Liu,
Xuefang Dai,
Guodong Liu,
Liangzhi Kou
Abstract:
Topological materials are recently regarded as the idea catalysts due to the protected surface metallic states and high carrier mobility, however the fundamental mechanism and the underlying relationship between the catalytic performance and topological states are in debate. Here, by means of symmetry analysis and first-principles calculations, we discover that the electride material of C12A7 host…
▽ More
Topological materials are recently regarded as the idea catalysts due to the protected surface metallic states and high carrier mobility, however the fundamental mechanism and the underlying relationship between the catalytic performance and topological states are in debate. Here, by means of symmetry analysis and first-principles calculations, we discover that the electride material of C12A7 hosts the multiple-fold fermions due to the interstitial-electrons, with the sixfold- and fourfold- degenerate points locating at high symmetric points near the Fermi energy, which are identified as the underlying reason of the enhanced catalytic ability in C12A7-based catalysts. The multiple-fold fermions exhibit much longer Fermi arcs on the (001) surface than traditional Weyl/Dirac fermions, the surface is thus highly chemical active and possesses a low Gibbs free energy for the hydrogen evolution reaction. The underlying relationship between catalytic performance and the topological surface state is explicitly verified by artificially hole do**, external strain and similar electride without the Fermi arcs, where the Gibbs free energies are significantly increased when the Fermi arcs is shifted to higher energy level. This work offers a guiding principle for understanding catalytic nature of electrides and the topological quantum catalysts.
△ Less
Submitted 19 August, 2021; v1 submitted 7 April, 2021;
originally announced April 2021.
-
Measurement of the Spin Tune Using the Coherent Spin Motion of Polarized Proton in a Storage Ring
Authors:
H. Huang,
J. Kewisch,
C. Liu,
A. Marusic,
W. Meng,
F. M eot,
P. Oddo,
V. Ptitsyn,
V. Ranjbar,
T. Roser,
W. B. Schmidke
Abstract:
This paper reports the first spin tune measurement at high energies (24 GeV and 255 GeV) with a driven coherent spin motion. To maintain polarization in a polarized proton collider, it is important to know the spin tune of the polarized proton beam, which is defined as the number of full spin precessions per revolution. A nine-magnet spin flipper has demonstrated high spin-flip efficiency in the p…
▽ More
This paper reports the first spin tune measurement at high energies (24 GeV and 255 GeV) with a driven coherent spin motion. To maintain polarization in a polarized proton collider, it is important to know the spin tune of the polarized proton beam, which is defined as the number of full spin precessions per revolution. A nine-magnet spin flipper has demonstrated high spin-flip efficiency in the presence of two Siberian snakes [1]. The spin flipper drives a spin resonance with a given frequency (or tune) and strength. When the drive tune is close to the spin tune, the proton spin direction is not vertical anymore, but precesses around the vertical direction. By measuring the precession frequency of the horizontal component the spin tune can be precisely measured. A driven coherent spin motion and fast turn-by-turn polarization measurement are keys to the measurement. The vertical spin direction is restored after turning the spin flipper off and the polarization value is not affected by the measurement. The fact that this manipulation preserves the polarization makes it possible to measure the spin tune during operation of a high energy accelerator.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Atomically resolved probe-type scanning tunneling microscope for use in harsh vibrational cryogen-free superconducting magnet
Authors:
Wenjie Meng,
Jihao Wang,
Yubin Hou,
Mengqiao Sui,
Junting Wang,
Gang Wu,
Junyun Li,
Qingyou Lu
Abstract:
We present a probe-type scanning tunneling microscope (STM) with atomic resolution that is designed to be directly inserted and work in a harsh vibrational cryogen-free superconducting magnet system. When a commercial variable temperature insert (VTI) is installed in the magnet and the STM is in turn housed in the VTI, a lowest temperature of 1.6 K can be achieved, where the STM still operates wel…
▽ More
We present a probe-type scanning tunneling microscope (STM) with atomic resolution that is designed to be directly inserted and work in a harsh vibrational cryogen-free superconducting magnet system. When a commercial variable temperature insert (VTI) is installed in the magnet and the STM is in turn housed in the VTI, a lowest temperature of 1.6 K can be achieved, where the STM still operates well. We have tested it in an 8 T superconducting magnet cooled with the pulse-tube cryocooler (PTC) and obtained atomically revolved graphite and NiSe2 images as well as the scanning tunneling spectrum (STS, i.e. dI/dV spectrum) data of the latter near its critical temperature, which show the formation process of the superconducting gap as a function of temperature. The drifting rates of the STM at 1.6 K in X-Y plane and Z direction are 1.15 and 1.71 pm/min respectively. Noise analysis for the tunneling current shows that the amplitudes of the dominant peaks (6.84 and 10.25Hz) are low. This is important as a cryogen-free magnet system has long been considered too harsh for any atomic resolution measurement.
△ Less
Submitted 31 May, 2018; v1 submitted 25 May, 2018;
originally announced May 2018.
-
The pH-dependent electrical potential and elastic modulus of a nanoscale DNA film and the resultant bending signal for a microcantilever biosensor
Authors:
Neng-Hui Zhang,
Wei-Lie Meng,
Cheng-Yin Zhang,
Jun-Zheng Wu
Abstract:
This paper devotes to formulating several multiscale models to study the effect of pH-dependent ionic inhomogeneity on the electrical potential distributions and the graded elastic properties of a nanoscale DNA film and the related bending deflections of a microcantilever biosensor. First, the Langmuir isotherm was used to improve the classical Poisson-Boltzmann equation for polyelectrolyte soluti…
▽ More
This paper devotes to formulating several multiscale models to study the effect of pH-dependent ionic inhomogeneity on the electrical potential distributions and the graded elastic properties of a nanoscale DNA film and the related bending deflections of a microcantilever biosensor. First, the Langmuir isotherm was used to improve the classical Poisson-Boltzmann equation for polyelectrolyte solutions by introducing a new solution parameters to consider the effect of the inhomogeneous distribution of hydrogen ions on the electrical potential. Second, inspired by the Parsegian's mesoscopic attraction potential for cation condensed DNAs, the graded distribution properties of the particles were taken in the construction of an alternative interaction potential for both attraction-dominated and repulsion-dominated films. The new model parameters were obtained by curve fitting with the bending deflection experiments of a microcantilever done by Arroyo-Hernandez et al. Third, by the improved interaction potential and the thought experiment about the compression of a DNA bar in the context of macroscopic continuum mechanics, we investigated the diversity of elastic properties of single-stranded DNA (ssDNA) films due to the self-adaptability of its microstructures and constituents to the pH value, salt concentration and cation valence. Numerical results show that electronegative DNA could be overcharged with a positive electrical potential when the particle distribution conforms with the condition that the sign of the new introduced solution parameter is negative. There exists a transition from the pH-sensitive interval to pH-insensitive one for bending signals and elastic moduli. Negative elastic modulus is first revealed in the attraction-dominated ssDNA film constrained on the Au-layer of a microcantilever biosensor.
△ Less
Submitted 25 June, 2017;
originally announced June 2017.
-
Superconducting nanowire single photon detector at 532 nm and demonstration in satellite laser ranging
Authors:
Hao Li,
Si**g Chen,
Lixing You,
Wengdong Meng,
Zhibo Wu,
Zhong** Zhang,
Kai Tang,
Lu Zhang,
Weijun Zhang,
Xiaoyan Yang,
Xiaoyu Liu,
Zhen Wang,
Xiaoming Xie
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) at a wavelength of 532 nm were designed and fabricated aiming to satellite laser ranging (SLR) applications. The NbN SNSPDs were fabricated on one-dimensional photonic crystals with a sensitive-area diameter of 42 um. The devices were coupled with multimode fiber (phi=50um) and exhibited a maximum system detection efficiency of 75% at an ex…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) at a wavelength of 532 nm were designed and fabricated aiming to satellite laser ranging (SLR) applications. The NbN SNSPDs were fabricated on one-dimensional photonic crystals with a sensitive-area diameter of 42 um. The devices were coupled with multimode fiber (phi=50um) and exhibited a maximum system detection efficiency of 75% at an extremely low dark count rate of <0.1 Hz. An SLR experiment using an SNSPD at a wavelength of 532 nm was successfully demonstrated. The results showed a depth ranging with a precision of ~8.0 mm for the target satellite LARES, which is ~3,000 km away from the ground ranging station at the Sheshan Observatory.
△ Less
Submitted 11 February, 2016;
originally announced February 2016.
-
High-gradient High-charge CW Superconducting RF gun with CsK2Sb photocathode
Authors:
Igor Pinayev,
Vladimir N. Litvinenko,
Joseph Tuozzolo,
Jean Clifford Brutus,
Sergey Belomestnykh,
Chase Boulware,
Charles Folz,
David Gassner,
Terry Grimm,
Yue Hao,
James Jamilkowski,
Yichao **g,
Dmitry Kayran,
George Mahler,
Michael Mapes,
Toby Miller,
Geetha Narayan,
Brian Sheehy,
Triveni Rao,
John Skaritka,
Kevin Smith,
Louis Snydstrup,
Yatming Than,
Erdong Wang,
Gang Wang
, et al. (18 additional authors not shown)
Abstract:
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun w…
▽ More
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun with a record-high accelerating gradient at the CsK2Sb photocathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (i.e., 3 nC). We briefly describe the system and then detail our experimental results. This achievement opens new era in generating high-power electron beams with a very high brightness.
△ Less
Submitted 17 November, 2015;
originally announced November 2015.
-
The Cornell-BNL FFAG-ERL Test Accelerator: White Paper
Authors:
Ivan Bazarov,
John Dobbins,
Bruce Dunham,
Georg Hoffstaetter,
Christopher Mayes,
Ritchie Patterson,
David Sagan,
Ilan Ben-Zvi,
Scott Berg,
Michael Blaskiewicz,
Stephen Brooks,
Kevin Brown,
Wolfram Fischer,
Yue Hao,
Wuzheng Meng,
François Méot,
Michiko Minty,
Stephen Peggs,
Vadim Ptitsin,
Thomas Roser,
Peter Thieberger,
Dejan Trbojevic,
Nick Tsoupas
Abstract:
The Cornell-BNL FFAG-ERL Test Accelerator (C$β$) will comprise the first ever Energy Recovery Linac (ERL) based on a Fixed Field Alternating Gradient (FFAG) lattice. In particular, we plan to use a Non Scaling FFAG (NS-FFAG) lattice that is very compact and thus space- and cost- effective, enabling multiple passes of the electron beam in a single recirculation beam line, using the superconducting…
▽ More
The Cornell-BNL FFAG-ERL Test Accelerator (C$β$) will comprise the first ever Energy Recovery Linac (ERL) based on a Fixed Field Alternating Gradient (FFAG) lattice. In particular, we plan to use a Non Scaling FFAG (NS-FFAG) lattice that is very compact and thus space- and cost- effective, enabling multiple passes of the electron beam in a single recirculation beam line, using the superconducting RF (SRF) linac multiple times. The FFAG-ERL moves the cost optimized linac and recirculation lattice to a dramatically better optimum.
The prime accelerator science motivation for C$β$ is proving that the FFAG-ERL concept works. This is an important milestone for the Brookhaven National Laboratory (BNL) plans to build a major Nuclear Physics facility, eRHIC, based on producing 21 GeV electron beams to collide with the RHIC ion beams. A consequence of the C$β$ work would be the availability of significantly better, cost-effective, compact CW high-brightness electron beams for a plethora of scientific investigations and applications, such as X-ray sources, dark-matter and dark-energy searches, and industrial high-power Free-Electron Laser (FEL) applications.
C$β$ brings together the resources and expertise of a large DOE National Laboratory, BNL, and a leading research university, Cornell. C$β$ will be built in an existing building at Cornell, for the most part using components that have been developed under previous R&D programs, including a fully commissioned world-leading photoemission electron injector, a large SRF accelerator module, and a high-power beam stop. The only elements that require design and construction from scratch is the FFAG magnet transport lattice.
This white paper describes a project that promises to propel high-power, high-brightness electron beam science and applications to an exciting new level.
△ Less
Submitted 2 April, 2015;
originally announced April 2015.
-
A Storage Ring Experiment to Detect a Proton Electric Dipole Moment
Authors:
V. Anastassopoulos,
S. Andrianov,
R. Baartman,
M. Bai,
S. Baessler,
J. Benante,
M. Berz,
M. Blaskiewicz,
T. Bowcock,
K. Brown,
B. Casey,
M. Conte,
J. Crnkovic,
G. Fanourakis,
A. Fedotov,
P. Fierlinger,
W. Fischer,
M. O. Gaisser,
Y. Giomataris,
M. Grosse-Perdekamp,
G. Guidoboni,
S. Haciomeroglu,
G. Hoffstaetter,
H. Huang,
M. Incagli
, et al. (66 additional authors not shown)
Abstract:
A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the…
▽ More
A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the scale of 3000~TeV.
△ Less
Submitted 15 February, 2015;
originally announced February 2015.
-
eRHIC Design Study: An Electron-Ion Collider at BNL
Authors:
E. C. Aschenauer,
M. D. Baker,
A. Bazilevsky,
K. Boyle,
S. Belomestnykh,
I. Ben-Zvi,
S. Brooks,
C. Brutus,
T. Burton,
S. Fazio,
A. Fedotov,
D. Gassner,
Y. Hao,
Y. **g,
D. Kayran,
A. Kiselev,
M. A. C. Lamont,
J. -H. Lee,
V. N. Litvinenko,
C. Liu,
T. Ludlam,
G. Mahler,
G. McIntyre,
W. Meng,
F. Meot
, et al. (22 additional authors not shown)
Abstract:
This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for su…
▽ More
This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for such a facility, following up on the community-wide 2012 white paper, 'Electron-Ion Collider: the Next QCD Frontier', and present a design concept that incorporates new, innovative accelerator techniques to provide a cost-effective upgrade of RHIC with polarized electron beams colliding with the full array of RHIC hadron beams. The new facility will deliver electron-nucleon luminosity of 10^33-10^34 cm-1sec-1 for collisions of 15.9 GeV polarized electrons on either 250 GeV polarized protons or 100 GeV/u heavy ion beams. The facility will also be capable of providing an electron beam energy of 21.2 GeV, at reduced luminosity. We discuss the on-going R&D effort to realize the project, and present key detector requirements and design ideas for an experimental program capable of making the 'golden measurements' called for in the EIC White Paper.
△ Less
Submitted 18 December, 2014; v1 submitted 4 September, 2014;
originally announced September 2014.
-
Recent RHIC in-situ coating technology developments
Authors:
A. Hershcovitch,
M. Blaskiewicz,
J. M. Brennan,
A. Chawla,
W. Fischer,
C-J Liaw,
W. Meng,
R. Todd,
A. Custer,
M. Erickson,
N. Jamshidi,
P. Kobrin,
R. La**,
H. J. Poole,
J. M. Jimenez,
H. Neupert,
M. Taborelli,
C. Yin-Vallgren,
N. Sochugov
Abstract:
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started develo** a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) c…
▽ More
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started develo** a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) coating. The Cu coating reduces wall resistivity, while a-C has low SEY that suppresses electron cloud formation. Recent RF resistivity computations indicate that 10 μm of Cu coating thickness is needed. But, Cu coatings thicker than 2 μm can have grain structures that might have lower SEY like gold black. A 15-cm Cu cathode magnetron was designed and fabricated, after which, 30 cm long samples of RHIC cold bore tubes were coated with various OFHC copper thicknesses; room temperature RF resistivity measured. Rectangular stainless steel and SS discs were Cu coated. SEY of rectangular samples were measured at room; and, SEY of a disc sample was measured at cryogenic temperatures.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
-
High-energy high-luminosity electron-ion collider eRHIC
Authors:
Vladimir N. Litvinenko,
Joanne Beebe-Wang,
Sergei Belomestnykh,
Ilan Ben-Zvi,
Michael M. Blaskiewicz,
Rama Calaga,
Xiangyun Chang,
Alexei Fedotov,
David Gassner,
Lee Hammons,
Harald Hahn,
Yue Hao,
** He,
William Jackson,
Animesh Jain,
Elliott C. Johnson,
Dmitry Kayran,
Jrg Kewisch,
Yun Luo,
George Mahler,
Gary McIntyre,
Wuzheng Meng,
Michiko Minty,
Brett Parker,
Alexander Pikin
, et al. (17 additional authors not shown)
Abstract:
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
△ Less
Submitted 13 September, 2011;
originally announced September 2011.
