Showing 1–47 of 47 results for author: Meng, S

Electrokinetic origin of swirling flow on nanoscale interface

Authors: Shuangshuang Meng, Yu Han, Wei Zhao, Yueqiang Zhu, Chen Zhang, Xiaoqiang Feng, Ce Zhang, Duyang Zang, Guangyin **g, Kaige Wang

Abstract: The zeta ($ζ$) potential is a pivotal metric for characterizing the electric field topology within an electric double layer - an important phenomenon on phase interface. It underpins critical processes in diverse realms such as chemistry, biomedical engineering, and micro/nanofluidics. Yet, local measurement of $ζ$ potential at the interface has historically presented challenges, leading researche… ▽ More The zeta ($ζ$) potential is a pivotal metric for characterizing the electric field topology within an electric double layer - an important phenomenon on phase interface. It underpins critical processes in diverse realms such as chemistry, biomedical engineering, and micro/nanofluidics. Yet, local measurement of $ζ$ potential at the interface has historically presented challenges, leading researchers to simplify a chemically homogenized surface with a uniform $ζ$ potential. In the current investigation, we present evidence that, within a microchannel, the spatial distribution of $ζ$ potential across a chemically homogeneous solid-liquid interface can become two-dimensional (2D) under an imposed flow regime, as disclosed by a state-of-art fluorescence photobleaching electrochemistry analyzer (FLEA) technique. The $ζ$ potential' s propensity to become increasingly negative downstream, presents an approximately symmetric, V-shaped pattern in the spanwise orientation. Intriguingly, and of notable significance to chemistry and engineering, this 2D $ζ$ potential framework was found to electrokinetically induce swirling flows in tens of nanometers, aligning with the streamwise axis, bearing a remarkable resemblance to the well-documented hairpin vortices in turbulent boundary layers. Our findings gesture towards a novel perspective on the genesis of vortex structures in nanoscale. Additionally, the FLEA technique emerges as a potent tool for discerning $ζ$ potential at a local scale with high resolution, potentially accelerating the evolution and applications of novel surface material. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Weberite Na$_2$MM'F$_7$ (M,M'=Redox-Active Metal) as Promising Fluoride-Based Sodium-Ion Battery Cathodes

Authors: Tenglong Lu, Sheng Meng, Miao Liu

Abstract: Sodium-ion batteries are a viable alternative to lithium-ion technology due to the plentiful sodium resources. However, certain commercialization challenges, such as low specific energies and poor cycling performance of current Na-ion cathodes, still need to be addressed. To overcome these hurdles, this study explored the potential of a novel class of fluoride-based materials, specifically trigona… ▽ More Sodium-ion batteries are a viable alternative to lithium-ion technology due to the plentiful sodium resources. However, certain commercialization challenges, such as low specific energies and poor cycling performance of current Na-ion cathodes, still need to be addressed. To overcome these hurdles, this study explored the potential of a novel class of fluoride-based materials, specifically trigonal-type Na$_2$MM'F$_7$ (M and M' are redox-active metals) belonging to the weberite-type compounds, as promising candidates for Na-ion cathodes. Through a comprehensive assessment utilizing ab initio calculations, twelve prospective compounds were identified, demonstrating high thermodynamic stability, large gravimetric capacities (>170 mAh/g), and low net Na-ion migration barriers (<600 meV). Significantly, ten out of the twelve screened compounds exhibit high specific energies exceeding 580 Wh/kg (approximately equals to the specific energy of LiFePO$_4$), indicating their exceptional electrochemical performance. This study will pave the way for further advancements in fluoride-based electrode materials. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Elucidating Dynamic Conductive State Changes in Amorphous Lithium Lanthanum Titanate for Resistive Switching Devices

Authors: Ryosuke Shimizu, Diyi Cheng, Guomin Zhu, Bing Han, Thomas S. Marchese, Randall Burger, Mingjie Xu, Xiaoqing Pan, Minghao Zhang, Ying Shirley Meng

Abstract: Exploration of novel resistive switching materials attracts attention to replace conventional Si-based transistors and to achieve neuromorphic computing that can surpass the limit of the current Von-Neumann computing for the time of Internet of Things (IoT). Materials priorly used to serve in batteries have demonstrated metal-insulator transitions upon an electrical biasing due to resulting compos… ▽ More Exploration of novel resistive switching materials attracts attention to replace conventional Si-based transistors and to achieve neuromorphic computing that can surpass the limit of the current Von-Neumann computing for the time of Internet of Things (IoT). Materials priorly used to serve in batteries have demonstrated metal-insulator transitions upon an electrical biasing due to resulting compositional change. This property is desirable for future resistive switching devices. Amorphous lithium lanthanum titanate (a-LLTO) was originally developed as a solid-state electrolyte with relatively high lithium ionic conductivity and low electronic conductivity among oxide-type solid electrolytes. However, it has been suggested that electric conductivity of a-LLTO changes depending on oxygen content. In this work, the investigation of switching behavior of a-LLTO was conducted by employing a range of voltage sweep techniques, ultimately establishing a stable and optimal operating condition within the voltage window of -3.5 V to 3.5 V. This voltage range effectively balances the desirable trait of a substantial resistance change by three orders of magnitude with the imperative avoidance of LLTO decomposition. This switching behavior is also confirmed at nanodevice of Ni/LLTO/Ni through in-situ biasing inside focused-ion beam/scanning electron microscope (FIB-SEM). Experiment and computation with different LLTO composition shows that LLTO has two distinct conductivity states due to Ti reduction. The distribution of these two states is discussed using simplified binary model, implying the conductive filament growth during low resistance state. Consequently, our study deepens understanding of LLTO electronic properties and encourages the interdisciplinary application of battery materials for resistive switching devices. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Quantitative Analysis of Sodium Metal Deposition and Interphase in Na Metal Batteries

Authors: Baharak Sayahpour, Weikang Li, Shuang Bai, Bingyu Lu, Bing Han, Yu-Ting Chen, Grayson Deysher, Saurabh Parab, Phillip Ridley, Ganesh Raghavendran, Long Hoang Bao Nguyen, Minghao Zhang, Ying Shirley Meng

Abstract: Sodium-ion batteries exhibit significant promise as a viable alternative to current lithium-ion technologies owing to their sustainability, low cost per energy density, reliability, and safety. Despite recent advancements in cathode materials for this category of energy storage systems, the primary challenge in realizing practical applications of sodium-ion systems is the absence of an anode syste… ▽ More Sodium-ion batteries exhibit significant promise as a viable alternative to current lithium-ion technologies owing to their sustainability, low cost per energy density, reliability, and safety. Despite recent advancements in cathode materials for this category of energy storage systems, the primary challenge in realizing practical applications of sodium-ion systems is the absence of an anode system with high energy density and durability. Although Na metal is the ultimate anode that can facilitate high-energy sodium-ion batteries, its use remains limited due to safety concerns and the high-capacity loss associated with the high reactivity of Na metal. In this study, titration gas chromatography is employed to accurately quantify the sodium inventory loss in ether- and carbonate-based electrolytes. Uniaxial pressure is developed as a powerful tool to control the deposition of sodium metal with dense morphology, thereby enabling high initial coulombic efficiencies. In ether-based electrolytes, the Na metal surface exhibits the presence of a uniform solid electrolyte interphase layer, primarily characterized by favorable inorganic chemical components with close-packed structures. The full cell, utilizing a controlled electroplated sodium metal in ether-based electrolyte, provides capacity retention of 91.84% after 500 cycles at 2C current rate and delivers 86 mAh/g discharge capacity at 45C current rate, suggesting the potential to enable Na metal in the next generation of sodium-ion technologies with specifications close to practical requirements. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Programmable access to microresonator solitons with modulational sideband heating

Authors: Huamin Zheng, Wei Sun, Xingxing Ding, Haoran Wen, Ruiyang Chen, Baoqi Shi, Yi-Han Luo, **bao Long, Chen Shen, Shan Meng, Hairun Guo, Junqiu Liu

Abstract: Dissipative Kerr solitons formed in high-$Q$ optical microresonators provide a route to miniaturized optical frequency combs that can revolutionize precision measurements, spectroscopy, sensing, and communication. In the last decade, a myriad of integrated material platforms have been extensively studied and developed to create photonic-chip-based soliton combs. However, the photo-thermal effect i… ▽ More Dissipative Kerr solitons formed in high-$Q$ optical microresonators provide a route to miniaturized optical frequency combs that can revolutionize precision measurements, spectroscopy, sensing, and communication. In the last decade, a myriad of integrated material platforms have been extensively studied and developed to create photonic-chip-based soliton combs. However, the photo-thermal effect in integrated optical microresonators has been a major issue preventing simple and reliable soliton generation. Several sophisticated techniques to circumvent the photo-thermal effect have been developed. In addition, instead of the single-soliton state, emerging applications in microwave photonics and frequency metrology prefer multi-soliton states. Here we demonstrate an approach to manage the photo-thermal effect and facilitate soliton generation. The approach is based on a single phase-modulated pump, where the generated blue-detuned sideband synergizes with the carrier and thermally stabilizes the microresonator. We apply this technique and demonstrate deterministic soliton generation of 19.97 GHz repetition rate in an integrated silicon nitride microresonator. Furthermore, we develop a program to automatically address to target $N-$soliton state, in addition to the single-soliton state, with near 100% success rate and as short as 10 s time consumption. Our method is valuable for soliton generation in essentially any platforms even with strong photo-thermal effect, and can promote wider applications of soliton frequency comb systems for microwave photonics, telecommunication and frequency metrology. △ Less

Submitted 7 September, 2023; originally announced September 2023.

Journal ref: APL Photonics 8, 126110 (2023)

Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization

Authors: Shuang Bai, Wurigumula Bao, Kun Qian, Bing Han, Weikang Li, Baharak Sayahpour, Bhagath Screenarayanan, Darren H. S. Tan, So-yeon Ham, Ying Shirley Meng

Abstract: Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiatio… ▽ More Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiation of SiO$_x$ is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiO$_x$ and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO$_{1.3}$ anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention after hundreds cycles under lean electrolyte conditions. The insights provided in this work could be used to further optimize high Si loading based anode in future high energy density batteries. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Key Parameters in Determining the Reactivity of Lithium Metal Battery

Authors: Bingyu Lu, Diyi Cheng, Bhagath Sreenarayanan, Weikang Li, Bhargav Bhamwala, Wurigumula Bao, Ying Shirley Meng

Abstract: Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential… ▽ More Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential scanning calorimetry (DSC) with in situ Fourier-transform infrared spectroscopy (FTIR) are used to quantitatively investigate the Li metal reactivity. Lithiated graphite (Li-Gr) and lithiated silicon (Li-Si) are also studied as the comparison samples. The reactivity of the plated Li when coupled with different electrolyte composition, morphology, and atmosphere is systematically studied. More importantly, the reactivity of Li metal full cell with different cathode materials (NMC622, LFP and LNMO) has been compared. It was found that all cell components, including electrolyte composition, Li morphology, the control of inactive Li accumulation and cathode stability, are essential in controlling the reactivity of the plated Li. After optimizing these conditions, the Li metal full cell shows no significant thermal reaction up to 400C. This work identifies the key parameters in controlling the reactivity of the plated Li and may facilitate lithium metal battery design and manufacturing in the coming future. △ Less

Submitted 28 February, 2023; originally announced March 2023.

Predicting structure-dependent Hubbard U parameters for assessing hybrid functional-level exchange via machine learning

Authors: Zhendong Cao, Guanghui Cai, Fankai Xie, Huaxian Jia, Wei Liu, Yaxian Wang, Feng Liu, Xinguo Ren, Sheng Meng, Miao Liu

Abstract: DFT+U is a widely used treatment in the density functional theory (DFT) to deal with correlated materials that contain open-shell elements, whereby the quantitative and sometimes even qualitative failures of local and semilocal approximations can be corrected without much computational overhead. However, finding appropriate U parameters for a given system is non-trivial and usually requires comput… ▽ More DFT+U is a widely used treatment in the density functional theory (DFT) to deal with correlated materials that contain open-shell elements, whereby the quantitative and sometimes even qualitative failures of local and semilocal approximations can be corrected without much computational overhead. However, finding appropriate U parameters for a given system is non-trivial and usually requires computationally intensive and cumbersome first-principles calculations. In this Letter, we address this issue by building a machine learning (ML) model to predict material-specific U parameters only from the structural information. An ML model is trained for the Mn-O chemical system by calibrating their DFT+U electronic structures with the hybrid functional results of more than Mn-O 3000 structures. The model allows us to determine a reliable U value (MAE=0.128 eV, R2=0.97) for any given structure at nearly no computational cost; yet the obtained U value is as good as that obtained from the conventional first-principles methods. Further analysis reveals that the U value is primarily determined by the local chemical structure, especially the bond lengths, and this property is well captured by the ML model developed in this work. This concept of the ML U model is universally applicable and can considerably ease the usage of the DFT+U method by providing structure-specific, readily accessible U values. △ Less

Submitted 19 February, 2023; originally announced February 2023.

Journal ref: Materials Futures, 2024, 3(2): 025601

Transition routes of electrokinetic flow in a divergent microchannel with bending walls

Authors: Yanxia Shi, Ming Zeng, Haoxin Bai, Shuangshuang Meng, Chen Zhang, Xiaoqiang Feng, Ce Zhang, Kaige Wang, Wei Zhao

Abstract: Electrokinetic flow can be generated as a highly coupled phenomenon among velocity field, electric conductivity field and electric field. It can exhibit different responses to AC electric fields in different frequency regimes, according to different instability/receptivity mechanisms. In this investigation, by both flow visualization and single-point laser-induced fluorescence (LIF) method, the re… ▽ More Electrokinetic flow can be generated as a highly coupled phenomenon among velocity field, electric conductivity field and electric field. It can exhibit different responses to AC electric fields in different frequency regimes, according to different instability/receptivity mechanisms. In this investigation, by both flow visualization and single-point laser-induced fluorescence (LIF) method, the response of AC electrokinetic flow and the transition routes towards chaos and turbulence have been experimentally investigated. It is found, when the AC frequency $f_f<30$ Hz, the interface responds at both the neutral frequency of the basic flow and the AC frequency. However, when $f_f>=30$ Hz, the interface responds only at the neutral frequency of the basic flow. Both periodic doubling and subcritical bifurcations have been observed in the transition of AC electrokinetic flow. We hope the current investigation can promote our current understanding on the ultrafast transition process of electrokinetic flow from laminar state to turbulence. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Observation of Gapped Dirac Cones in a Two-Dimensional Su-Schrieffer-Heeger Lattice

Authors: Daiyu Geng, Hui Zhou, Shaosheng Yue, Zhenyu Sun, Peng Cheng, Lan Chen, Sheng Meng, Kehui Wu, Baojie Feng

Abstract: The Su-Schrieffer-Heeger (SSH) model in a two-dimensional rectangular lattice features gapless or gapped Dirac cones with topological edge states along specific peripheries. While such a simple model has been recently realized in photonic/acoustic lattices and electric circuits, its material realization in condensed matter systems is still lacking. Here, we study the atomic and electronic structur… ▽ More The Su-Schrieffer-Heeger (SSH) model in a two-dimensional rectangular lattice features gapless or gapped Dirac cones with topological edge states along specific peripheries. While such a simple model has been recently realized in photonic/acoustic lattices and electric circuits, its material realization in condensed matter systems is still lacking. Here, we study the atomic and electronic structure of a rectangular Si lattice on Ag(001) by angle-resolved photoemission spectroscopy and theoretical calculations. We demonstrate that the Si lattice hosts gapped Dirac cones at the Brillouin zone corners. Our tight-binding analysis reveals that the Dirac bands can be described by a 2D SSH model with anisotropic polarizations. The gap of the Dirac cone is driven by alternative hop** amplitudes in one direction and staggered potential energies in the other one and hosts topological edge states. Our results establish an ideal platform to explore the rich physical properties of the 2D SSH model. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: Accepted for publication in Nature Communications

Journal ref: Nat. Commun. 13, 7000 (2022)

Ultra-Low Temperature Li/CFx Batteries Enabled by Fast-transport and Anion-pairing Liquefied Gas Electrolytes

Authors: Yijie Yin, John Holoubek, Alex Liu, Baharak Sayahpour, Ganesh Raghavendran, Guorui Cai, Bing Han, Matthew Mayer, Noah B. Schorr, Timothy N. Lambert, Katharine L. Harrison, Weikang Li, Zheng Chen, Y. Shirley Meng

Abstract: Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we repo… ▽ More Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we report a liquefied gas electrolyte with an anion-pair solvation structure based on dimethyl ether with a low melting point and low viscosity, leading to high ionic conductivity between a wide temperature range. Besides that, through systematic X-ray photoelectron spectroscopy integrated with transmission electron microscopy characterizations, we evaluate the interface of CFx for low-temperature performance. We conclude that the fast transport and anion-pairing solvation structure of the electrolyte bring about reduced charge transfer resistance at low temperatures, which resulted in significantly enhanced performance of Li/CFx cells. Utilizing 50 mg/cm2 loading electrodes, the Li/CFx still displayed 1530 Wh/kg at reduced temperature. This work provides insights into the electrolyte design that may overcome the operational limits of batteries in extreme environments. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Suppressing chemical corrosions of lithium metal anodes

Authors: Bingyu Lu, Weikang Li, Diyi Cheng, Miguel Ceja, Wurigumula Bao, Chengcheng Fang, Ying Shirley Meng

Abstract: The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TG… ▽ More The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TGC) method and Cryogenic Focused Ion Beam (Cryo-FIB), we established a quantitative relationship between the chemical corrosion rate and electrochemically deposited Li morphology in various liquid electrolyte systems. We identified that the corrosion rate is dominated by the porosity of the deposited Li. The larger the porosity of deposited Li has, the faster the corrosion rate will be. We further proposed strategies to mitigate the chemical corrosion on Li thus to extend the calendar life of Li metal batteries. By strictly controlling the stacking pressure during Li plating, Li deposits with ultra-low porosity can be achieved, suppressing the corrosion rate to 0.08% per day compared with 1.71% per day of the high-porosity Li. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Unraveling the stable cathode electrolyte interface in all solid-state thin-film battery operating at 5V

Authors: Ryosuke Shimizu, Diyi Cheng, Minghao Zhang, Bingyu Lu, Thomas A. Wynn, Randall Burger, Min-cheol Kim, Guomin Zhu, Ying Shirley Meng

Abstract: Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell degradation through the oxidative decomposition of carbonate-based liquid electrolytes. In contrast, some solid-state electrolytes have a wide elec… ▽ More Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell degradation through the oxidative decomposition of carbonate-based liquid electrolytes. In contrast, some solid-state electrolytes have a wide electrochemical stability range and can withstand the required oxidative potential. In this work, a thin-film battery consisting of a LNMO cathode with a solid lithium phosphorus oxynitride (LiPON) electrolyte is tested and their interface before and after cycling is characterized. With Li metal as the anode, this system can deliver stable performance for 600 cycles with an average Coulombic efficiency > 99%. Neutron depth profiling indicates a slight overlithiated layer at the interface prior to cycling; a result that is consistent with the excess charge capacity measured during the first cycle. Cryogenic electron microscopy further reveals intimate contact between LNMO and LiPON without noticeable structure and chemical composition evolution after extended cycling, demonstrating the superior stability of LiPON against a high voltage cathode. Consequently, we propose design guidelines for interface engineering that could accelerate the commercialization of a high voltage cell with solid or liquid electrolytes. △ Less

Submitted 5 April, 2022; originally announced April 2022.

Comments: 21 pages and 5 figures

Superconductive materials with MgB2-like structures from data-driven screening

Authors: Ze Yu, Tao Bo, Bo Liu, Zhendong Fu, Huan Wang, Sheng Xu, Tianlong Xia, Shiliang Li, Sheng Meng, Miao Liu

Abstract: Finding viable superconducting materials is of interest to the physics community as the superconductors are the playground to manifest many appealing quantum phenomena. This work exemplifies an end-to-end materials discovery towards novel MgB2-like superconductors, starting from the data-driven compound screening all the way to the experimental materialization. In addition to the known superconduc… ▽ More Finding viable superconducting materials is of interest to the physics community as the superconductors are the playground to manifest many appealing quantum phenomena. This work exemplifies an end-to-end materials discovery towards novel MgB2-like superconductors, starting from the data-driven compound screening all the way to the experimental materialization. In addition to the known superconducting compounds, CaB2 (Tc = 9.4 ~ 28.6 K), SrGa2 (Tc = 0.1 ~ 2.4 K), BaGa2 (Tc = 0.3 ~ 3.3 K), BaAu2 (Tc = 0.0 ~ 0.5 K), and LaCu2 (Tc = 0.1 ~ 2.2 K) are newly discovered, out of ~182,000 starting structures, to be the most promising superconducting compounds that share similar atomic structures with MgB2. Moreover, BaGa2 is experimentally synthesized and measured to confirm that the compound is a BCS superconductor with Tc = 0.36 K, in good agreement with our theoretical predictions. This work provides a "once and for all" study for the MgB2-like superconductors and showcases that it is feasible to discover new materials via a data-driven approach. △ Less

Submitted 23 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. B 105, 214517 (2022)

MIONet: Learning multiple-input operators via tensor product

Authors: Pengzhan **, Shuai Meng, Lu Lu

Abstract: As an emerging paradigm in scientific machine learning, neural operators aim to learn operators, via neural networks, that map between infinite-dimensional function spaces. Several neural operators have been recently developed. However, all the existing neural operators are only designed to learn operators defined on a single Banach space, i.e., the input of the operator is a single function. Here… ▽ More As an emerging paradigm in scientific machine learning, neural operators aim to learn operators, via neural networks, that map between infinite-dimensional function spaces. Several neural operators have been recently developed. However, all the existing neural operators are only designed to learn operators defined on a single Banach space, i.e., the input of the operator is a single function. Here, for the first time, we study the operator regression via neural networks for multiple-input operators defined on the product of Banach spaces. We first prove a universal approximation theorem of continuous multiple-input operators. We also provide detailed theoretical analysis including the approximation error, which provides a guidance of the design of the network architecture. Based on our theory and a low-rank approximation, we propose a novel neural operator, MIONet, to learn multiple-input operators. MIONet consists of several branch nets for encoding the input functions and a trunk net for encoding the domain of the output function. We demonstrate that MIONet can learn solution operators involving systems governed by ordinary and partial differential equations. In our computational examples, we also show that we can endow MIONet with prior knowledge of the underlying system, such as linearity and periodicity, to further improve the accuracy. △ Less

Submitted 12 February, 2022; originally announced February 2022.

Screening promising CsV3Sb5-like kagome materials from systematic first-principles evaluation

Authors: Yutao Jiang, Ze Yu, Yuxin Wang, Tenglong Lu, Sheng Meng, Kun Jiang, Miao Liu

Abstract: CsV3Sb5 kagome lattice holds the promise for manifesting electron correlation, topology and superconducting. However, by far only three CsV3Sb5-like kagome materials have been experimentally spotted. In this work, we enlarge this family of materials to 1386 compounds via element species substitution, and the further screening process suggests that 28 promising candidates have superior thermodynami… ▽ More CsV3Sb5 kagome lattice holds the promise for manifesting electron correlation, topology and superconducting. However, by far only three CsV3Sb5-like kagome materials have been experimentally spotted. In this work, we enlarge this family of materials to 1386 compounds via element species substitution, and the further screening process suggests that 28 promising candidates have superior thermodynamic stability, hence they are highly likely to be synthesized. Moreover, these compounds possess several identical electronic structures, and can be categorized into five non-magnetic and three magnetic groups accordingly. It is our hope that this work can greatly expand the viable phase space of the CsV3Sb5-like materials for investigating or tuning the novel quantum phenomena in kagome lattice. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Journal ref: Chin. Phys. Lett. 39 047402(2022)

Observation of topological flat bands in the kagome semiconductor Nb$_3$Cl$_8$

Authors: Zhenyu Sun, Hui Zhou, Cuixiang Wang, Shiv Kumar, Daiyu Geng, Shaosheng Yue, Xin Han, Yuya Haraguchi, Kenya Shimada, Peng Cheng, Lan Chen, Youguo Shi, Kehui Wu, Sheng Meng, Baojie Feng

Abstract: The destructive interference of wavefunctions in a kagome lattice can give rise to topological flat bands (TFBs) with a highly degenerate state of electrons. Recently, TFBs have been observed in several kagome metals, including Fe$_3$Sn$_2$, FeSn, CoSn, and YMn$_6$Sn$_6$. Nonetheless, kagome materials that are both exfoliable and semiconducting are lacking, which seriously hinders their device app… ▽ More The destructive interference of wavefunctions in a kagome lattice can give rise to topological flat bands (TFBs) with a highly degenerate state of electrons. Recently, TFBs have been observed in several kagome metals, including Fe$_3$Sn$_2$, FeSn, CoSn, and YMn$_6$Sn$_6$. Nonetheless, kagome materials that are both exfoliable and semiconducting are lacking, which seriously hinders their device applications. Herein, we show that Nb$_3$Cl$_8$, which hosts a breathing kagome lattice, is gapped out because of the absence of inversion symmetry, while the TFBs survive because of the protection of the mirror reflection symmetry. By angle-resolved photoemission spectroscopy measurements and first-principles calculations, we directly observe the TFB and a moderate band gap in Nb$_3$Cl$_8$. By mechanical exfoliation, we successfully obtain monolayers of Nb$_3$Cl$_8$ and confirm that they are stable under ambient conditions. In addition, our calculations show that monolayers of Nb$_3$Cl$_8$ have a magnetic ground state, thus providing opportunities to study the interplay between geometry, topology, and magnetism. △ Less

Submitted 8 June, 2022; v1 submitted 2 November, 2021; originally announced November 2021.

Comments: 6 pages, 4 figures

Journal ref: Nano Lett. 22, 4596 (2022)

Observation of one-dimensional Dirac fermions in silicon nanoribbons

Authors: Shaosheng Yue, Hui Zhou, Ya Feng, Yue Wang, Zhenyu Sun, Daiyu Geng, Masashi Arita, Shiv Kumar, Kenya Shimada, Peng Cheng, Lan Chen, Yugui Yao, Sheng Meng, Kehui Wu, Baojie Feng

Abstract: Dirac materials, which feature Dirac cones in the reciprocal space, have been one of the hottest topics in condensed matter physics in the past decade. To date, 2D and 3D Dirac Fermions have been extensively studied, while their 1D counterparts are rare. Recently, Si nanoribbons (SiNRs), which are composed of alternating pentagonal Si rings, have attracted intensive attention. However, the electro… ▽ More Dirac materials, which feature Dirac cones in the reciprocal space, have been one of the hottest topics in condensed matter physics in the past decade. To date, 2D and 3D Dirac Fermions have been extensively studied, while their 1D counterparts are rare. Recently, Si nanoribbons (SiNRs), which are composed of alternating pentagonal Si rings, have attracted intensive attention. However, the electronic structure and topological properties of SiNRs are still elusive. Here, by angle-resolved photoemission spectroscopy, scanning tunneling microscopy/spectroscopy measurements, first-principles calculations, and tight-binding model analysis, we demonstrate the existence of 1D Dirac Fermions in SiNRs. Our theoretical analysis shows that the Dirac cones derive from the armchairlike Si chain in the center of the nanoribbon and can be described by the Su-Schrieffer-Heeger model. These results establish SiNRs as a platform for studying the novel physical properties in 1D Dirac materials. △ Less

Submitted 13 May, 2022; v1 submitted 6 October, 2021; originally announced October 2021.

Comments: 4 figures

Journal ref: Nano Lett. 22, 695-701 (2022)

A universal model for the formation energy prediction of inorganic compounds

Authors: Yingzong Liang, Mingwei Chen, Yanan Wang, Huaxian Jia, Tenglong Lu, Fankai Xie, Sheng Meng, Miao Liu

Abstract: Harnessing the recent advance in data science and materials science, it is feasible today to build predictive models for materials properties. In this study, we employ the data of high-throughput quantum mechanics calculations based on 170,714 inorganic crystalline compounds to train a machine learning model for formation energy prediction. Different from the previous work, our model reaches a fai… ▽ More Harnessing the recent advance in data science and materials science, it is feasible today to build predictive models for materials properties. In this study, we employ the data of high-throughput quantum mechanics calculations based on 170,714 inorganic crystalline compounds to train a machine learning model for formation energy prediction. Different from the previous work, our model reaches a fairly good predictive ability (R2=0.982 and MAE=0.07 eVatom-1, DenseNet model) and meanwhile can be universally applied to the large phase space of inorganic materials. The improvement comes from several effective structure-dependent descriptors that are proposed to take the information of electronegativity and structure into account. This model can provide a useful tool to search for new materials in a vast phase space in a fast and cost-effective manner. △ Less

Submitted 31 July, 2021; originally announced August 2021.

Journal ref: Sci. China Mater. 66, 343 (2023)

Bridging Nano and Micro-scale X-ray Tomography for Battery Research by Leveraging Artificial Intelligence

Authors: Jonathan Scharf, Mehdi Chouchane, Donal P. Finegan, Bingyu Lu, Christopher Redquest, Min-cheol Kim, Weiliang Yao, Alejandro A. Franco, Dan Gostovic, Zhao Liu, Mark Riccio, František Zelenka, Jean-Marie Doux, Ying Shirley Meng

Abstract: X-ray Computed Tomography (X-ray CT) is a well-known non-destructive imaging technique where contrast originates from the materials' absorption coefficients. Novel battery characterization studies on increasingly challenging samples have been enabled by the rapid development of both synchrotron and laboratory-scale imaging systems as well as innovative analysis techniques. Furthermore, the recent… ▽ More X-ray Computed Tomography (X-ray CT) is a well-known non-destructive imaging technique where contrast originates from the materials' absorption coefficients. Novel battery characterization studies on increasingly challenging samples have been enabled by the rapid development of both synchrotron and laboratory-scale imaging systems as well as innovative analysis techniques. Furthermore, the recent development of laboratory nano-scale CT (NanoCT) systems has pushed the limits of battery material imaging towards voxel sizes previously achievable only using synchrotron facilities. Such systems are now able to reach spatial resolutions down to 50 nm. Given the non-destructive nature of CT, in-situ and operando studies have emerged as powerful methods to quantify morphological parameters, such as tortuosity factor, porosity, surface area, and volume expansion during battery operation or cycling. Combined with powerful Artificial Intelligence (AI)/Machine Learning (ML) analysis techniques, extracted 3D tomograms and battery-specific morphological parameters enable the development of predictive physics-based models that can provide valuable insights for battery engineering. These models can predict the impact of the electrode microstructure on cell performances or analyze the influence of material heterogeneities on electrochemical responses. In this work, we review the increasing role of X-ray CT experimentation in the battery field, discuss the incorporation of AI/ML in analysis, and provide a perspective on how the combination of multi-scale CT imaging techniques can expand the development of predictive multiscale battery behavioral models. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: 33 pages, 5 figures

Edge-Propagation Discharge Mechanism in CFx Batteries -- a First Principles and Experimental Study

Authors: Kevin Leung, Noah B. Schorr, Matthew Mayer, Timothy N. Lambert, Y. Shirley Meng, K. L. Harrison

Abstract: Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic le… ▽ More Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic length scales will improve practical CFx energy density, rate capability, and rechargeability. So far, purely experimental techniques have not identified the correct discharge mechanism or explained the discharge voltage. We apply Density Functional Theory calculations to demonstrate that a CFx-edge propagation discharge mechanism based on lithium insertion at the CF/C boundary in partially discharged CFx exhibits a voltage range of 2.5 to 2.9 V -- depending on whether solvent molecules are involved. The voltages and solvent dependence agrees with our discharge and galvanostatic intermittent titration technique measurements. The predicted discharge kinetics are consistent with CFx operations. Finally, we predict Li/CFx rechargeability under the application of high potentials, along a charging pathway different from that of discharge. Our work represents a general, quasi-kinetic framework to understand the discharge of conversion cathodes, circumventing the widely used phase diagram approach which most likely does not apply to Li/CFx because equilibrium conditions are not attained in this system. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 31 pages, 7 figures

Journal ref: Chemistry of Materials vol. 33, pp. 1760-1770 (2021)

Investigating Degradation Modes in Zn-AgO Aqueous Batteries with $\textit{In-Situ}$ X-ray Micro Computed Tomography

Authors: Jonathan Scharf, Lu Yin, Christopher Redquest, Ruixiao Liu, Xueying L. Quinn, Jeff Ortega, Xia Wei, Joseph Wang, Jean-Marie Doux, Ying Shirley Meng

Abstract: To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>… ▽ More To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>100 cycles). Here, we report the $\textit{in-situ}$ CT study of Zn-Ag batteries and demonstrate the effects of current collector parasitic gassing over long-term storage and cycling. We design performance representative $\textit{in-situ}$ CT cells that can achieve >250 cycles at a high areal capacity of $\mathrm{12.5\;mAh/cm^2}$. Combined with electrochemical experiments, the effects of current collector parasitic gassing are revealed with micro-scale CT (MicroCT). The volume expansion and evolution of ZnO and Zn depletion is quantified with cycling and elevated temperature testing. The experimental insights are then utilized to develop larger form-factor $\mathrm{4\;cm^2}$ cells with electrochemically compatible current collectors. With this, we demonstrate over 325 cycles at a high capacity of $\mathrm{12.5\;mAh/cm^2}$ for a $\mathrm{4\;cm^2}$ form-factor. This work demonstrates that $\textit{in-situ}$ X-ray CT used in long cycle-lifetime studies can be applied to examine a multitude of other battery chemistries to improve their performances. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 20 Pages and 6 Figures

Carbon Free High Loading Silicon Anodes Enabled by Sulfide Solid Electrolytes for Robust All Solid-State Batteries

Authors: Darren H. S. Tan, Yu-Ting Chen, Hedi Yang, Wurigumula Bao, Bhagath Sreenarayanan, Jean-Marie Doux, Weikang Li, Bingyu Lu, So-Yeon Ham, Baharak Sayahpour, Jonathan Scharf, Erik A. Wu, Grayson Deysher, Hyea Eun Han, Hoe ** Hah, Hyeri Jeong, Zheng Chen, Ying Shirley Meng

Abstract: The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characteri… ▽ More The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characterization, as well as quantification of interfacial components showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. In uSi || layered-oxide full cells, high current densities at room temperature (5 mA cm 2), wide operating temperature (-20°C to 80°C) and high loadings (>11 mAh cm-2) were demonstrated for both charge and discharge operations. The promising battery performance can be attributed to both the desirable interfacial property between uSi and sulfide electrolytes, as well as the unique chemo-mechanical behavior of the Li-Si alloys. △ Less

Submitted 6 March, 2021; originally announced March 2021.

Comments: 13 pages, 5 figures

Imaging real-time amorphization of hybrid perovskite solar cells under electrical biasing

Authors: Min-cheol Kim, Namyoung Ahn, Diyi Cheng, Mingjie Xu, Xiaoqing Pan, Suk Jun Kim, Yanqi Luo, David P. Fenning, Darren H. S. Tan, Minghao Zhang, So-Yeon Ham, Kiwan Jeong, Mansoo Choi, Ying Shirley Meng

Abstract: Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degrad… ▽ More Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degradation, there is still a lack of direct evidence of structural transformation at the atomistic scale. Such an understanding is crucial to evaluate and pin-point how such instabilities are induced relative to external perturbations such as illumination or electrical bias with time, allowing researchers to devise effective strategies to mitigate them. Here, we designed an in-situ TEM setup to enable real-time observation of amorphization in double cation mixed perovskite materials under electrical biasing at 1 V. It is found that amorphization occurs along the (001) and (002) planes, which represents the observation of in-situ facet-dependent amorphization of a perovskite crystal. To reverse the degradation, the samples were heated at 50 oC and was found to recrystallize, effectively regaining its performance losses. This work is vital toward understanding fundamental ion-migration phenomena and address instability challenges of perovskite optoelectronics. △ Less

Submitted 23 October, 2020; originally announced October 2020.

High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics

Authors: Lu Yin, Jonathan Scharf, Jessica Ma, Jean-Marie Doux, Christopher Redquest, Viet Le, Yin Yijie, Jeff Ortega, Xia Wei, Joseph Wang, Ying Shirley Meng

Abstract: The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-… ▽ More The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-printed layer-by-layer and vacuum-sealed in a stacked configuration. The batteries are customizable in sizes and capacities, with the highest obtained areal capacity of 54 mAh/cm2 for primary applications. Advanced micro-CT and EIS were used to characterize the battery, whose mechanical stability was tested with repeated twisting and bending. The batteries were used to power a flexible E-ink display system that requires a high-current drain and exhibited superior performance than commercial coin-cell batteries. The developed battery presents a practical solution for powering a wide range of electronics and holds major implications for the future development of practical and high-performance flexible batteries. △ Less

Submitted 31 August, 2020; originally announced September 2020.

Comments: 32 pages, 6 figures

Pressure-tailored lithium deposition and dissolution in lithium metal batteries

Authors: Chengcheng Fang, Bingyu Lu, Gorakh Pawar, Minghao Zhang, Diyi Cheng, Shuru Chen, Miguel Ceja, Jean-Marie Doux, Mei Cai, Boryann Liaw, Ying Shirley Meng

Abstract: A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited… ▽ More A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited and stripped, have never been achieved. Here, by controlling the uniaxial stack pressure during battery operation, a dense Li deposition (99.49% electrode density) with an ideal columnar structure has been achieved. Using multi-scale characterization and simulation, we elucidated the critical role of stack pressure on Li nucleation, growth and dissolution processes, and developed innovative strategies to maintain the ideal Li morphology during extended cycling. The precision manipulation of Li deposition and dissolution is a critical step to enable fast charging and low temperature operation for Li metal batteries. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Unravelling a Zigzag Pathway for Hot-Carrier Collection at CH3NH3PbI3/Graphene Interfaces

Authors: ** Zhang, Hao Hong, **can Zhang, Chunchun Wu, Hailin Peng, Kaihui Liu, Sheng Meng

Abstract: The capture of photoexcited deep-band hot carriers, excited by photons with energies far above the bandgap, is of significant importance for photovoltaic and photoelectronic applications since it is directly related to the quantum efficiency of photon-to-electron conversion. By employing time-resolved photoluminescence and state-of-the-art time-domain density functional theory, we reveal that phot… ▽ More The capture of photoexcited deep-band hot carriers, excited by photons with energies far above the bandgap, is of significant importance for photovoltaic and photoelectronic applications since it is directly related to the quantum efficiency of photon-to-electron conversion. By employing time-resolved photoluminescence and state-of-the-art time-domain density functional theory, we reveal that photoexcited hot carriers in organic-inorganic hybrid perovskites prefer a zigzag interfacial charge-transfer pathway, i.e., the hot carriers transfer back and forth between CH3NH3PbI3 and graphene, before they reach a charge separated state. Driven by quantum coherence and interlayer vibrational modes, this pathway at the semiconductor-graphene interface takes about 400 femtoseconds, much faster than the relaxation process within CH3NH3PbI3 (in several picoseconds). We further demonstrate that the transfer rate of the pathway can be further enhanced by interfacial defects. Our work provides a new insight for the fundamental understanding and precise manipulation of hot-carrier dynamics at the complex semiconductor-graphene interfaces, paving the way for highly efficient photovoltaic and photoelectric device optimization. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Unveiling the Stable Nature of the Solid Electrolyte Interphase between Lithium Metal and LiPON via Cryogenic Electron Microscopy

Authors: Diyi Cheng, Thomas Andrew Wynn, Xuefeng Wang, Shen Wang, Minghao Zhang, Ryosuke Shimizu, Shuang Bai, Han Nguyen, Chengcheng Fang, Min-cheol Kim, Weikang Li, Bingyu Lu, Suk Jun Kim, Ying Shirley Meng

Abstract: The solid electrolyte interphase (SEI) is regarded as the most complex but the least understood constituent in secondary batteries using liquid and solid electrolytes. The nanostructures of SEIs were recently reported to be equally important to the chemistry of SEIs for stabilizing Li metal in liquid electrolyte. However, the dearth of such knowledge in all-solid-state battery (ASSB) has hindered… ▽ More The solid electrolyte interphase (SEI) is regarded as the most complex but the least understood constituent in secondary batteries using liquid and solid electrolytes. The nanostructures of SEIs were recently reported to be equally important to the chemistry of SEIs for stabilizing Li metal in liquid electrolyte. However, the dearth of such knowledge in all-solid-state battery (ASSB) has hindered a complete understanding of how certain solid-state electrolytes, such as LiPON, manifest exemplary stability against Li metal. Characterizing such solid-solid interfaces is difficult due to the buried, highly reactive, and beam-sensitive nature of the constituents within. By employing cryogenic electron microscopy (cryo-EM), the interphase between Li metal and LiPON is successfully preserved and probed, revealing a multilayer mosaic SEI structure with concentration gradients of nitrogen and phosphorous, materializing as crystallites within an amorphous matrix. This unique SEI nanostructure is less than 80 nm and is shown stable and free of any organic lithium containing species or lithium fluoride components, in contrast to SEIs often found in state-of-the-art organic liquid electrolytes. Our findings reveal insights on the nanostructures and chemistry of such SEIs as a key component in lithium metal batteries to stabilize Li metal anode. △ Less

Submitted 18 November, 2020; v1 submitted 23 June, 2020; originally announced June 2020.

Glassy Li Metal Anode for High-Performance Rechargeable Li Batteries

Authors: Xuefeng Wang, Gorakh Pawar, Ye**g Li, Xiaodi Ren, Minghao Zhang, Bingyu Lu, Abhik Banerjee, ** Liu, Eric J. Dufek, Ji-Guang Zhang, Jie Xiao, Jun Liu, Ying Shirley Meng, Boryann Liaw

Abstract: Controlling nanostructure from molecular, crystal lattice to the electrode level remains as arts in practice, where nucleation and growth of the crystals still require more fundamental understanding and precise control to shape the microstructure of metal deposits and their properties. This is vital to achieve dendrite-free Li metal anodes with high electrochemical reversibility for practical high… ▽ More Controlling nanostructure from molecular, crystal lattice to the electrode level remains as arts in practice, where nucleation and growth of the crystals still require more fundamental understanding and precise control to shape the microstructure of metal deposits and their properties. This is vital to achieve dendrite-free Li metal anodes with high electrochemical reversibility for practical high-energy rechargeable Li batteries. Here, cryogenic-transmission electron microscopy was used to capture the dynamic growth and atomic structure of Li metal deposits at the early nucleation stage, in which a phase transition from amorphous, disordered states to a crystalline, ordered one was revealed as a function of current density and deposition time. The real-time atomic interaction over wide spatial and temporal scales was depicted by the reactive-molecular dynamics simulations. The results show that the condensation accompanied with the amorphous-to-crystalline phase transition requires sufficient exergy, mobility and time to carry out, contrary to what the classical nucleation theory predicts. These variabilities give rise to different kinetic pathways and temporal evolutions, resulting in various degrees of order and disorder nanostructure in nano-sized domains that dominate in the morphological evolution and reversibility of Li metal electrode. Compared to crystalline Li, amorphous/glassy Li outperforms in cycle life in high-energy rechargeable batteries and is the desired structure to achieve high kinetic stability for long cycle life. △ Less

Submitted 1 April, 2020; v1 submitted 24 October, 2019; originally announced October 2019.

Comments: 29 pages, 8 figures

Stack Pressure Considerations for Room Temperature All-Solid-State Lithium Metal Batteries

Authors: Jean-Marie Doux, Han Nguyen, Darren H. S. Tan, Abhik Banerjee, Xuefeng Wang, Erik A. Wu, Chiho Jo, Hedi Yang, Ying Shirley Meng

Abstract: All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendritic growth at room temperature. While cell parameters such as current density, electrolyte… ▽ More All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendritic growth at room temperature. While cell parameters such as current density, electrolyte porosity and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior is still poorly understood. Here, we investigated failure mechanisms of lithium metal in all-solid-state batteries as a function of stack pressure, and conducted in situ characterization of the interfacial and morphological properties of the buried lithium in solid electrolytes. We found that a low stack pressure of 5 MPa allows reliable plating and strip** in a lithium symmetric cell for more than 1000 hours, and a Li | Li6PS5Cl | LiNi0.80Co0.15Al0.05O2 full cell, plating more than 4 um of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all-solid-state batteries at reasonable stack pressures. △ Less

Submitted 3 December, 2019; v1 submitted 4 October, 2019; originally announced October 2019.

Comments: 13 pages, 5 figures

Bulk Material Based Selective Infrared Emitter for Sub-Ambient Daytime Radiative Cooling

Authors: Yue Yang, Linshuang Long, Sheng Meng, Nicholas Denisuk, Li** Wang, Yonggang Zhu

Abstract: Through passively emitting excess heat to the outer space, radiative cooling has been demonstrated as an efficient way for energy saving applications. Selective surface with unity emittance only within the atmospheric window as well as zero absorption within the solar spectrum is sought to achieve the best sub-ambient radiative cooling performance during the daytime. In this work, we proposed a bu… ▽ More Through passively emitting excess heat to the outer space, radiative cooling has been demonstrated as an efficient way for energy saving applications. Selective surface with unity emittance only within the atmospheric window as well as zero absorption within the solar spectrum is sought to achieve the best sub-ambient radiative cooling performance during the daytime. In this work, we proposed a bulk radiative cooler consisting of a 1-mm-thick lithium fluoride crystal coated with silver backing, which exhibits a solar absorptance of 4.7% and nearly ideal infrared selectivity with high emission exactly within the atmospheric transmission band (i.e., 8-13 um). Excellent daytime cooling performance was demonstrated in an outdoor test with stagnation temperature below the ambient temperature by 5 K under solar irradiance above 900 W/m2 and a net cooling power of about 60 W/m2 when the cooler is in thermal equilibrium with the ambient. As a bulk material with the highest ultraviolet-visible-near infrared transmittance, lithium fluoride crystal has been widely employed as the optical windows and mirrors in various applications. The proposed simple selective infrared emitter based on lithium fluoride would open up an innovative way to radiatively cool optical systems. △ Less

Submitted 6 July, 2019; originally announced August 2019.

A Data-Driven Approach for Accurate Rainfall Prediction

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based wea… ▽ More In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based weather features like Temperature, Relative Humidity, Dew Point, Solar Radiation, PWV along with Seasonal and Diurnal variables are identified, and a detailed feature correlation study is presented. While all features play a significant role in rainfall classification, only a few of them, such as PWV, Solar Radiation, Seasonal and Diurnal features, stand out for rainfall prediction. Based on these findings, an optimum set of features are used in a data-driven machine learning algorithm for rainfall prediction. The experimental evaluation using a four-year (2012-2015) database shows a true detection rate of 80.4%, a false alarm rate of 20.3%, and an overall accuracy of 79.6%. Compared to the existing literature, our method significantly reduces the false alarm rates. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: Published in IEEE Transactions on Geoscience and Remote Sensing, 2019

A general criterion for solid instability and its application to creases

Authors: Pengfei Yang, Yaopeng Fang, Yanan Yuan, Shun Meng, Haroon Imtiaz, Bin Liu, Huajian Gao

Abstract: A general force-perturbation-based criterion for solid instability is proposed, which can predict instability including crease without priori knowledge of instability configuration. The crease instability is analyzed in detail, we found that the occurrence of solid instability does not always correspond to the non-positive definiteness of global stiffness matrix. An element stiffness-based criteri… ▽ More A general force-perturbation-based criterion for solid instability is proposed, which can predict instability including crease without priori knowledge of instability configuration. The crease instability is analyzed in detail, we found that the occurrence of solid instability does not always correspond to the non-positive definiteness of global stiffness matrix. An element stiffness-based criterion based on material stiffness is proposed as a stronger criterion in order to fast determine the occurrence of instability. This criterion has been shown to degenerate into the criterion for judging instability of certain known phenomena, such as necking and shear band phenomena. Besides, instability in strongly anisotropic materials is also predicted by the element stiffness-based criterion. △ Less

Submitted 30 December, 2019; v1 submitted 19 March, 2019; originally announced April 2019.

Anisotropic Charge Carrier and Coherent Acoustic Phonon Dynamics of Black Phosphorus Studied by Transient Absorption Microscopy

Authors: Shengjie Meng, Hongyan Shi, Hu Jiang, Xiudong Sun, Bo Gao

Abstract: Due to its corrugated hexagonal lattice structure, Black phosphorus (BP) has unique anisotropic physical properties, which provides an additional freedom for designing devices. Many body interactions, including interactions with phonon, is crucial for heat dissipation and charge carrier mobility in device. However, the rich properties of the coherent acoustic phonon, including anisotropy, propagat… ▽ More Due to its corrugated hexagonal lattice structure, Black phosphorus (BP) has unique anisotropic physical properties, which provides an additional freedom for designing devices. Many body interactions, including interactions with phonon, is crucial for heat dissipation and charge carrier mobility in device. However, the rich properties of the coherent acoustic phonon, including anisotropy, propagation and generation were not fully interrogated. In this paper, the polarization-resolved transient absorption microscopy was conducted on BP flakes to study the dynamics of photoexcited charge carriers and coherent acoustic phonon. Polarization-resolved transient absorption images and traces were recorded and showed anisotropic and thickness-dependent charge carriers decay dynamics. The dam** of the coherent acoustic phonon oscillation was found to be anisotropic, which was attributed to the polarization-dependent absorption length of the probe pulse. From the analysis of initial oscillation amplitude and phase of coherent acoustic phonon oscillation, we proposed that the direct deformation potential mechanism dominated the generation of coherent acoustic phonons in our experiment. Besides, we obtained the sound velocity of the coherent acoustic phonon from the oscillation frequency and the acoustic echo, respectively, which agreed well with each other. These findings provide significant insights into the rich acoustic phonon properties of BP, and promise important application for BP in polarization-sensitive optical and optoelectronic devices. △ Less

Submitted 20 July, 2019; v1 submitted 13 January, 2019; originally announced January 2019.

Comments: just accepted

Journal ref: Journal of Physical Chemistry C, 2019

Ultrafast charge ordering by self-amplified exciton-phonon dynamics in TiSe$_2$

Authors: Chao Lian, Sheng-Jie Zhang, Shi-Qi Hu, Meng-Xue Guan, Sheng Meng

Abstract: The origin of charge density waves (CDW) in TiSe$_2$ has long been debated, mainly due to the difficulties in identifying the timescales of how and when the excitonic pairing and electron-phonon coupling (EPC) come into play. Without a proper time resolution and microscopic mechanism, one has to assume simultaneous appearance of CDW and periodic lattice distortions (PLD). Here, we accomplish a com… ▽ More The origin of charge density waves (CDW) in TiSe$_2$ has long been debated, mainly due to the difficulties in identifying the timescales of how and when the excitonic pairing and electron-phonon coupling (EPC) come into play. Without a proper time resolution and microscopic mechanism, one has to assume simultaneous appearance of CDW and periodic lattice distortions (PLD). Here, we accomplish a complete separation of exciton and PLD dynamics and unravel their interplay in the ultrafast time domain in our real-time time-dependent density functional theory simulations. We find that laser pulses knock off the exciton order and induce a homogeneous bonding-antibonding transition in the initial 20 fs, then the weakened electronic order triggers ionic movements antiparallel to the original PLD. The EPC comes into play after the initial 20~fs, and the two processes mutually amplify each other leading to a complete inversion of CDW ordering. The self-amplified dynamics reproduces the evolution of band structures in excellent agreement with ultrafast photoemission experiment. Hence we resolve the key processes in the initial dynamics of CDW that help elucidate the mechanism underlying the long debated problem. △ Less

Submitted 4 January, 2020; v1 submitted 2 January, 2019; originally announced January 2019.

Comments: Supplementary Material Included

Journal ref: Nat Commun 11, 43 (2020)

Ultrafast carrier relaxation and its Pauli drag in photo-enhanced melting of solids

Authors: Chao Lian, S. B. Zhang, Sheng Meng

Abstract: Ultrafast light-matter interaction is a powerful tool for the study of solids. Upon laser excitation, carrier multiplication and lattice acceleration beyond thermal velocity can occur, as a result of far-from-equilibrium carrier relaxation. The roles of electron-electron and electron-phonon scatterings are identified by first-principles dynamic simulations, from which a unified phase diagram emerg… ▽ More Ultrafast light-matter interaction is a powerful tool for the study of solids. Upon laser excitation, carrier multiplication and lattice acceleration beyond thermal velocity can occur, as a result of far-from-equilibrium carrier relaxation. The roles of electron-electron and electron-phonon scatterings are identified by first-principles dynamic simulations, from which a unified phase diagram emerges. It not only explains the experimentally-observed "inertial" melting but also predicts abnormal dam** by Pauli Exclusion Principle with a new perspective on ultrahigh-intensity laser applications. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: 8 pages, 5 figures, with SUPPLEMENTARY MATERIALS

Study of electron emission from 1D nanomaterials under super high field

Authors: Chi Li, Ke Chen, Mengxue Guan, Xiaowei Wang, Xu Zhou, Feng Zhai, Jiayu Dai, Zhenjun Li, Zhipei Sun, Sheng Meng, Kaihui Liu, Qing Dai

Abstract: Photoemission driven by a strong electric field of near-infrared or visible light, referred to as strong-field photoemission, produces attosecond electron pulses that are synchronized to the waveform of the incident light, and this principle lies at the heart of current attosecond technologies. However, full access to strong-field photoemission regimes at near-infrared wavelengths based on solid-s… ▽ More Photoemission driven by a strong electric field of near-infrared or visible light, referred to as strong-field photoemission, produces attosecond electron pulses that are synchronized to the waveform of the incident light, and this principle lies at the heart of current attosecond technologies. However, full access to strong-field photoemission regimes at near-infrared wavelengths based on solid-state materials is restricted by space-charge screening and material damage at high optical-field strengths, which significantly hampers the realization of predicted attosecond technologies, such as ultra-sensitive optical phase modulation. Here, we demonstrate a new type of strong-field photoemission behaviour with extreme nonlinearity -- photoemission current scales follow a 40th power law of the optical-field strength, making use of sub-nanometric carbon nanotubes and 800 nm pulses. As a result, the total photoemission current depends on the carrier-envelope phase with a greatly improved photoemission current modulation depth of up to 100%, which has not previously been achieved. Time-dependent density functional calculations reveal the completely new behaviour of the optical-field induced tunnelling emission process directly from the valence band of the carbon nanotubes, which is an indication of full access to a strong-field photoemission regime. Furthermore, the nonlinear dynamics are observed to be tunable by changing the binding energy of the valence-band-maximum, as confirmed by Simpleman model calculations. We believe that such extreme nonlinear photoemission from nanotips offers a new means of producing extreme temporal-spatial resolved electron pulses. These results additionally provide a new design philosophy for attosecond electronics and optics by making use of tunable band structures in nanomaterials. △ Less

Submitted 25 December, 2018; originally announced December 2018.

A Potential Low Cost Remote Sensing Using GPS Derived PWV

Authors: Shilpa Manandhar, Yee Hui Lee, Yu Song Meng, Feng Yuan, Soumyabrata Dev

Abstract: In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this ran… ▽ More In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this range were then compared to the PWV values calculated using the radiosonde data. The correlation coefficient and the Root Mean Square (RMS) error between the GPS and radiosonde derived PWV decreases with the increasing cut-off angle and the distance between the two. The seasonal parameters also effect the relation between the two. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

Systematic Study of Weather Variables for Rainfall Detection

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Stefan Winkler, Yu Song Meng

Abstract: Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four princ… ▽ More Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four principal components explain a cumulative variance of 85%. The first two principal components are applied to distinguish rain and no-rain scenarios as well. We conclude that all 7 variables have similar contribution towards rainfall detection. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

A Data-driven Approach to Detecting Precipitation from Meteorological Sensor Data

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

On the Importance of PWV in Detecting Precipitation

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this pa… ▽ More With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this paper, we discuss how GPS signals can be used to estimate the amount of water vapor in the atmosphere. Furthermore, we demonstrate the importance of such precipitable water vapor (PWV) in the atmosphere for the task of rainfall detection. We present a detailed analysis in our dataset of meteorological data of 3 years. Test dataset shows that use of PWV in rainfall detection helps to reduce the false alarm rate by almost 12%. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: Published in IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2018

Universal Scaling in Intrinsic Resistivity of Two-Dimensional Metal Borophene

Authors: ** Zhang, Jia Zhang, Cai Cheng, Jian Liu, Johannes Lischner, Feliciano Giustino, Sheng Meng

Abstract: Two-dimensional boron sheets (borophenes) have been successfully synthesized in experiments and are expected to exhibit intriguing transport properties such as the emergence of superconductivity and Dirac Fermions. However, quantitative understanding of intrinsic electrical transport of borophene has not been achieved. Here, we report a comprehensive first-principles study on electron-phonon drive… ▽ More Two-dimensional boron sheets (borophenes) have been successfully synthesized in experiments and are expected to exhibit intriguing transport properties such as the emergence of superconductivity and Dirac Fermions. However, quantitative understanding of intrinsic electrical transport of borophene has not been achieved. Here, we report a comprehensive first-principles study on electron-phonon driven intrinsic electrical resistivity (\r{ho}) of emerging borophene structures. We find that the resistivity is highly dependent on the atomic structures and electron density of borophene. Low-temperature resistivity of borophene \r{ho} exhibits a universal scaling behavior, which increases rapidly with temperature T (\r{ho}~T^4), while \r{ho} increases linearly for a large temperature window T > 100 K. It is observed that this universal behavior of intrinsic resistivity is well described by Bloch-Grünesisen model. Different from graphene and conventional three-dimensional metals, the intrinsic resistivity of borophenes can be easily tuned by adjusting carrier densities while the Bloch-Grünesisen temperature is nearly fixed at ~100 K. Our work suggests monolayer boron can serve as an intriguing platform for realizing high-tunable two-dimensional electronic devices. △ Less

Submitted 29 November, 2017; originally announced November 2017.

Comments: 4 figures

Analyzing Cloud Optical Properties Using Sky Cameras

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The C… ▽ More Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The COT values are generally obtained from satellite images. However, satellite images have a low temporal- and spatial- resolutions; and are not suitable for study in applications as solar energy generation and forecasting. Therefore, ground-based sky cameras are now getting popular in such fields. In this paper, we analyze the cloud optical thickness value, from the ground-based sky cameras, and provide future research directions. △ Less

Submitted 24 August, 2017; originally announced August 2017.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2017

Momentum-resolved TDDFT algorithm in atomic basis for real time tracking of electronic excitation

Authors: Chao Lian, Shi-Qi Hu, Meng-Xue Guan, Sheng Meng

Abstract: Ultrafast electronic dynamics in solids lies at the core of modern condensed matter and materials physics. To build up a practical ab initio method for studying solids under photoexcitation, we develop a momentum-resolved real-time time dependent density functional theory (rt-TDDFT)algorithm using numerical atomic basis, together with the implementation of both the length and vector gauge of the e… ▽ More Ultrafast electronic dynamics in solids lies at the core of modern condensed matter and materials physics. To build up a practical ab initio method for studying solids under photoexcitation, we develop a momentum-resolved real-time time dependent density functional theory (rt-TDDFT)algorithm using numerical atomic basis, together with the implementation of both the length and vector gauge of the electromagnetic field. When applied to simulate elementary excitations in two-dimensional materials such as graphene, different excitation modes, only distinguishable in momentum space, are observed. The momentum-resolved rt-TDDFT is important and computationally efficient for the study of ultrafast dynamics in extended systems. △ Less

Submitted 15 October, 2018; v1 submitted 27 February, 2017; originally announced February 2017.

Journal ref: J. Chem. Phys. 149, 154104 (2018)

Dirac fermions in borophene

Authors: Baojie Feng, Osamu Sugino, Ro-Ya Liu, ** Zhang, Ryu Yukawa, Mitsuaki Kawamura, Takushi Iimori, Howon Kim, Yukio Hasegawa, Hui Li, Lan Chen, Kehui Wu, Hiroshi Kumigashira, Fumio Komori, Tai-Chang Chiang, Sheng Meng, Iwao Matsuda

Abstract: Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the β12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) su… ▽ More Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the β12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the β12-sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac cones. Furthermore, each Dirac cone could be split by introducing periodic perturbations representing overlayer-substrate interactions. These unusual electronic structures were confirmed by angle-resolved photoemission spectroscopy and validated by first-principles calculations. Our results suggest monolayer boron as a new platform for realizing novel high-speed low-dissipation devices. △ Less

Submitted 2 February, 2017; originally announced February 2017.

Comments: accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 118, 096401 (2017)

Mechanism and modulation of terahertz generation from a semimetal - graphite

Authors: Tong Ye, Sheng Meng, ** Zhang, Yiwen E, Yu** Yang, Wuming Liu, Yan Yin, Li Wang

Abstract: Semi-metals might offer a stronger interaction and a better confinement for terahertz wave than semiconductors, while preserve tunability. Particularly, graphene-based materials are envisioned as terahertz modulators, filters and ultra-broadband sources. However, the understanding of terahertz generation from those materials is still not clear, thus limits us recognizing the potential and improvin… ▽ More Semi-metals might offer a stronger interaction and a better confinement for terahertz wave than semiconductors, while preserve tunability. Particularly, graphene-based materials are envisioned as terahertz modulators, filters and ultra-broadband sources. However, the understanding of terahertz generation from those materials is still not clear, thus limits us recognizing the potential and improving device performances. Graphite, the mother material of graphene and a typical bulk semi-metal, is a good system to study semi-metals and graphene-based materials. Here we experimentally modulate and maximize the terahertz signal from graphite surface, thus reveal the mechanism - surface field driving photon induced carriers into transient current to radiate terahertz wave. We also discuss the differences between graphite and semiconductors; particularly graphite shows no temperature dependency from room temperature to 80C. Above knowledge will help us understand terahertz generations, achieve maximum output and electric modulation, in semi-metal or graphene based devices. △ Less

Submitted 28 September, 2015; originally announced September 2015.

Journal ref: Sci. Rep. 6, 22798 (2016)

A long-term frequency-stabilized erbium-fiber-laser-based optical frequency comb with an intra-cavity electro-optic modulator

Authors: Y. Zhang, L. Yan, W. Zhao, S. Meng, S. Fan, L. Zhang, G. Guo, S. Zhang, H. Jiang

Abstract: We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic modulator and a piezo-transducer, the repetition rate can be stabilized with high servo bandwidth in a range of 3 kHz, enabling long-term repetition rate phase-lock… ▽ More We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic modulator and a piezo-transducer, the repetition rate can be stabilized with high servo bandwidth in a range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6E-13 at 1 second integration time, limited by the measurement system; and it is inversely proportional to integration time in short term. Furthermore, using a common path f-2f interferometer, the carrier envelope offset frequency of the frequency comb is obtained with a signal-to-noise ratio of 40 dB in 3 MHz resolution bandwidth. Stabilized carrier envelope offset frequency exhibits a deviation of 0.6 mHz at 1 second integration time. △ Less

Submitted 24 November, 2014; v1 submitted 10 October, 2014; originally announced October 2014.

Comments: 9pages,5figures, will be submited to chinese physics B