-
Impact of Do** and Geometry on Breakdown Voltage of Semi-Vertical GaN-on-Si MOS Capacitors
Authors:
D. Favero,
C. De Santi,
K. Mukherjee,
M. Borga,
K. Geens,
U. Chatterjee,
B. Bakeroot,
S. Decoutere,
F. Rampazzo,
G. Meneghesso,
E. Zanoni,
M. Meneghini
Abstract:
For the development of reliable vertical GaN transistors, a detailed analysis of the robustness of the gate stack is necessary, as a function of the process parameters and material properties. To this aim, we report a detailed analysis of breakdown performance of planar GaN-on-Si MOS capacitors. The analysis is carried out on capacitors processed on different GaN bulk do** (6E18 Si/cc, 6E17 Si/c…
▽ More
For the development of reliable vertical GaN transistors, a detailed analysis of the robustness of the gate stack is necessary, as a function of the process parameters and material properties. To this aim, we report a detailed analysis of breakdown performance of planar GaN-on-Si MOS capacitors. The analysis is carried out on capacitors processed on different GaN bulk do** (6E18 Si/cc, 6E17 Si/cc and 2.5E18 Mg/cc, p-type), different structures (planar, trench-like) and different geometries (area, perimeter and shape). We demonstrate that (i) capacitors on p-GaN have better breakdown performance; (ii) the presence of a trench structure significantly reduces breakdown capabilities; (iii) breakdown voltage is dependent on area, with a decreasing robustness for increasing dimensions; (iv) breakdown voltage is independent of shape (rectangular, circular). TCAD simulations, in agreement with the measurements, illustrate the electric field distribution near breakdown and clarify the results obtained experimentally.
△ Less
Submitted 20 October, 2022; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Study and characterization of GaN MOS capacitors: planar versus trench topographies
Authors:
K. Mukherjee,
C. De Santi,
S. You,
K. Geens,
M. Borga,
S. Decoutere,
B. Bakeroot,
P. Diehle,
F. Altmann,
G. Meneghesso,
E. Zanoni,
M. Meneghini
Abstract:
Develo** high quality GaN/dielectric interfaces is a fundamental step for manufacturing GaN vertical power transistors. In this paper, we quantitatively investigate the effect of planar etching treatment and trench formation on the performance of GaN-based MOS (metal oxide semiconductor) stacks. The results demonstrate that (i) blanket etching the GaN surface does not degrade the robustness of t…
▽ More
Develo** high quality GaN/dielectric interfaces is a fundamental step for manufacturing GaN vertical power transistors. In this paper, we quantitatively investigate the effect of planar etching treatment and trench formation on the performance of GaN-based MOS (metal oxide semiconductor) stacks. The results demonstrate that (i) blanket etching the GaN surface does not degrade the robustness of the deposited dielectric layer; (ii) the addition of the trench etch, while improving reproducibility, results in a decrease of breakdown performance compared to the planar structures. (iii) for the trench structures, the voltage for a 10 years lifetime is still above 20 V, indicating a good robustness. (iv) To review the trap** performance across the metal-dielectric-GaN stack, forward-reverse capacitance-voltage measurements with and without stress and photo-assistance are performed. Overall, as-grown planar capacitors devoid of prior etching steps show lowest trap**, while trench capacitors have higher interface trap**, and bulk trap** comparable to the blanket etched capacitors. (v) The nanostructure of the GaN/dielectric interface was characterized by high resolution scanning transmission electron microscopy (HR-STEM). An increased roughness of 2-3 monolayers at the GaN surface was observed after blanket etching, which was correlated to the higher density of interface traps. The results presented in this paper give fundamental insight on how the etch and trench processing affects the trap** and robustness of trench-gate GaN-MOSFETs, and provide guidance for the optimization of device performance.
△ Less
Submitted 21 July, 2022; v1 submitted 20 July, 2022;
originally announced July 2022.
-
Positive and negative charge trap** GaN HEMTs: interplay between thermal emission and transport-limited processes
Authors:
A. Nardo,
C. De Santi,
C. Koller,
C. Ostermaier,
I. Daumiller,
G. Meneghesso,
E. Zanoni,
M. Meneghini
Abstract:
This paper investigates the kinetics of buffer trap** in GaN-based normally-off high-voltage transistors. The analysis was carried out on transfer-length method (TLM) structures. By means of a custom setup, (i) we investigated the trap** and de-trap** processes induced by a large vertical bias and identified different mechanisms, responsible for the storage of negative and positive charge in…
▽ More
This paper investigates the kinetics of buffer trap** in GaN-based normally-off high-voltage transistors. The analysis was carried out on transfer-length method (TLM) structures. By means of a custom setup, (i) we investigated the trap** and de-trap** processes induced by a large vertical bias and identified different mechanisms, responsible for the storage of negative and positive charge in the buffer. (ii) temperature-dependent analysis was carried out to evaluate the time constants associated to negative and positive charge build-up. Remarkably, the results indicate that the activation energy for negative charge trap** is ~0.3 eV, which is much lower than the ionization energy of carbon acceptors (0.8-0.9 eV). This result is explained by considering that trap** and de-trap** are not dominated by thermal processes (thermal emission from acceptors), but by transport mechanisms, that limit the transfer of charge to trap states. (iii) in the recovery experiments, after low stress bias negative charge trap** dominates. After high stress bias, also the effect of positive charge generation is detected, and the related activation energy is evaluated. The results presented within this paper clearly indicate that the trap** and de-trap** kinetics of normally-off GaN HEMTs are the results of the interplay of transport-limited conduction processes, that result in a low thermal activation (Ea~0.3 eV), compared to that of CN acceptors.
△ Less
Submitted 20 December, 2021; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Degradation mechanism of 0.15 um AlGaN/GaN HEMTs: effects of hot electrons
Authors:
Z. Gao,
F. Rampazzo,
M. Meneghini,
C. De Santi,
F. Chiocchetta,
D. Marcon,
G. Meneghesso,
E. Zanoni
Abstract:
The degradation mechanisms of AlGaN/GaN HEMTs adopting Fe and C co-do**, with high and low carbon do** concentration were investigated by means of hot-electron step stress and 24 hours stress tests. Firstly, DC and EL characterization at room temperature are summarized, then the parametric evolution during hot-electron step stress tests at the semi-on state was compared, the assumption for the…
▽ More
The degradation mechanisms of AlGaN/GaN HEMTs adopting Fe and C co-do**, with high and low carbon do** concentration were investigated by means of hot-electron step stress and 24 hours stress tests. Firstly, DC and EL characterization at room temperature are summarized, then the parametric evolution during hot-electron step stress tests at the semi-on state was compared, the assumption for the degradation mechanism is that hot-electrons activated the pre-existing traps in the buffer, attenuate the electric field in the gate drain access region and damaging the gate contact, the parametric evolution during constant stresses is discussed.
△ Less
Submitted 21 July, 2021; v1 submitted 18 July, 2021;
originally announced July 2021.
-
Reliability comparison of AlGaN/GaN HEMTs with different carbon do** concentration
Authors:
Z. Gao,
M. Meneghini,
F. Rampazzo,
M. Rzin,
C. De Santi,
G. Meneghesso,
E. Zanoni
Abstract:
The reliability of AlGaN/GaN HEMTs adopting Fe and C co-do**, with high and low carbon do** concentration was investigated by means of different stress tests. Firstly, DC and pulsed I-V characterization at room temperature are discussed, then drain step stress tests at different gate voltages are compared, afterwards, the constant stress at different bias points are discussed. Results show tha…
▽ More
The reliability of AlGaN/GaN HEMTs adopting Fe and C co-do**, with high and low carbon do** concentration was investigated by means of different stress tests. Firstly, DC and pulsed I-V characterization at room temperature are discussed, then drain step stress tests at different gate voltages are compared, afterwards, the constant stress at different bias points are discussed. Results show that the high C HEMTs showed reduced DIBL, smaller leakage current, as well as decreased electric field, leading to an improved robustness during on-state stress testing, with respect to the reference ones. Failure modes during constant voltage stress consists in a decrease of drain current and transconductance, accelerated by temperature and electric field.
△ Less
Submitted 21 July, 2021; v1 submitted 18 July, 2021;
originally announced July 2021.
-
Short Term Reliability and Robustness of ultra-thin barrier, 110 nm-gate AlN/GaN HEMTs
Authors:
Zhan Gao,
Matteo Meneghini,
Kathia Harrouche,
Riad Kabouche,
Francesca Chiocchetta,
Daniele Marcon,
Etienne Okada,
Fabiana Rampazzo,
Carlo De Santi,
Farid Medjdoub,
Gaudenzio Meneghesso,
Enrico Zanoni
Abstract:
Short-term reliability and robustness of 110 nm AlN/GaN HEMTs has been evaluated by means of off-state, semi-on state and on-state step stress tests on devices having different gate-drain distance, LGD. While breakdown voltages and critical voltages scale almost linearly with LGD, failure mode remains almost unchanged in all tested devices, and consists in an increase of gate leakage, accompanied…
▽ More
Short-term reliability and robustness of 110 nm AlN/GaN HEMTs has been evaluated by means of off-state, semi-on state and on-state step stress tests on devices having different gate-drain distance, LGD. While breakdown voltages and critical voltages scale almost linearly with LGD, failure mode remains almost unchanged in all tested devices, and consists in an increase of gate leakage, accompanied by a positive shift of threshold voltage. In off-state, electroluminescence images detect the presence of localized leakage paths which may act as preferential paths for electron trap**. Degradation does not depend on dissipated power and is preliminary attributed to hot-electron trap**, enhanced by electric fields.
△ Less
Submitted 30 July, 2021; v1 submitted 18 July, 2021;
originally announced July 2021.
-
OFF-state trap** phenomena in GaN HEMTs: interplay between gate trap**, acceptor ionization and positive charge redistribution
Authors:
E. Canato,
M. Meneghini,
C. De Santi,
F. Masin,
A. Stockman,
P. Moens,
E. Zanoni,
G. Meneghesso
Abstract:
We present an extensive analysis of the trap** processes induced by drain bias stress in AlGaN/GaN high-electron-mobility transistors (HEMTs) with p-GaN gate. We demonstrate that: (i) with increasing drain stress, pulsed I-V and VTH measurements shown an initial positive VTH variation and an increase in RON then, for drain voltages >100 V, VTH is stable and the RON shows a partial recovery. (ii)…
▽ More
We present an extensive analysis of the trap** processes induced by drain bias stress in AlGaN/GaN high-electron-mobility transistors (HEMTs) with p-GaN gate. We demonstrate that: (i) with increasing drain stress, pulsed I-V and VTH measurements shown an initial positive VTH variation and an increase in RON then, for drain voltages >100 V, VTH is stable and the RON shows a partial recovery. (ii) At moderate voltages, VTH instability is related to trap** at the gate stack, due to residual negative charge left behind by the holes that leave the p-GaN layer through the Schottky gate contact and/or to trap** at the barrier. At higher voltages, we demonstrate the interplay of two trap** processes by C-V and pulsed drain current analysis: (iii) a fast storage of positive charge, accumulated near the buffer/SRL interface, not strongly thermally activated, dominating at higher voltages; (iv) a slower negative charge storage, thermally activated with activation energies for trap** and de-trap** equal to ~0.6 eV and ~0.4-0.8 eV, respectively.
△ Less
Submitted 14 July, 2021; v1 submitted 13 July, 2021;
originally announced July 2021.
-
Exploration of Gate Trench Module for Vertical GaN devices
Authors:
M. Ruzzarin,
K. Geens,
M. Borga,
H. Liang,
S. You,
B. Bakeroot,
S. Decoutere,
C. De Santi,
A. Neviani,
M. Meneghini,
G. Meneghesso,
E. Zanoni
Abstract:
The aim of this work is to present the optimization of the gate trench module for use in vertical GaN devices in terms of cleaning process of the etched surface of the gate trench, thickness of gate dielectric and magnesium concentration of the p-GaN layer. The analysis was carried out by comparing the main DC parameters of devices that differ in surface cleaning process of the gate trench, gate d…
▽ More
The aim of this work is to present the optimization of the gate trench module for use in vertical GaN devices in terms of cleaning process of the etched surface of the gate trench, thickness of gate dielectric and magnesium concentration of the p-GaN layer. The analysis was carried out by comparing the main DC parameters of devices that differ in surface cleaning process of the gate trench, gate dielectric thickness, and body layer do**. . On the basis of experimental results, we report that: (i) a good cleaning process of the etched GaN surface of the gate trench is a key factor to enhance the device performance, (ii) a gate dielectric >35-nm SiO2 results in a narrow distribution for DC characteristics, (iii) lowering the p-do** in the body layer improves the ON-resistance (RON). Gate capacitance measurements are performed to further confirm the results. Hypotheses on dielectric trap**/detrap** mechanisms under positive and negative gate bias are reported.
△ Less
Submitted 6 April, 2021; v1 submitted 2 April, 2021;
originally announced April 2021.
-
Turning bad into good: a water-splitting-active hole transporting material to preserve the performance of perovskite solar cells in humid environments
Authors:
Min Kim,
Antonio Alfano,
Giovanni Perotto,
Michele Serri,
Nicola Dengo,
Alessandro Mezzetti,
Silvia Gross,
Mirko Prato,
Marco Salerno,
Roberto Sorrentino,
Gaudenzio Meneghesso,
Fabio Di Fonzo,
Annamaria Petrozza,
Teresa Gatti,
Francesco Lamberti
Abstract:
Lead halide perovskite-based photoactive layers are nowadays employed for a large number of optoelectronic applications, from solar cells to photodetectors and light-emitting diodes, because of their excellent absorption, emission and charge-transport properties. Unfortunately, their commercialization is still hindered by an intrinsic instability towards classical environmental conditions. Water i…
▽ More
Lead halide perovskite-based photoactive layers are nowadays employed for a large number of optoelectronic applications, from solar cells to photodetectors and light-emitting diodes, because of their excellent absorption, emission and charge-transport properties. Unfortunately, their commercialization is still hindered by an intrinsic instability towards classical environmental conditions. Water in particular promotes fast decomposition, leading to a drastic decrease in device performance. An innovative functional approach to overcome this major issue could derive from integrating water-splitting active species within charge extracting layers adjacent to the perovskite photoactive layer, converting incoming water molecules into molecular oxygen and hydrogen before they reach this last one, thus preserving device performance in time. In this work we report for the first time on a perovskite-ancillary layer based on CuSCN nanoplateletes dispersed in a p-type semiconducting polymeric matrix, combining hole extraction/transport properties with good water-oxidation activity, that transforms incoming water molecules and further triggers the in situ p-do** of the conjugated polymer by means of the produced dioxygen, further improving transport of photogenerated charges. This composite layer enables the long-term stabilization of a mixed cation lead halide perovskite within a direct solar cell architecture, maintaining a stable performance for 28 days in high-moisture simulated conditions. Our findings demonstrate that the engineering of a hole extraction layer with water-splitting active additives represent a valuable strategy to mitigate the degradation of perovskite solar cells exposed to atmospheric humidity. A similar approach could be employed in the future to improve stabilities of other optoelectronic devices based on water-sensitive species.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.