-
A meshless method to compute the proper orthogonal decomposition and its variants from scattered data
Authors:
Iacopo Tirelli,
Miguel Alfonso Mendez,
Andrea Ianiro,
Stefano Discetti
Abstract:
Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorizations of the matrix colle…
▽ More
Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorizations of the matrix collecting all the data, which are assumed to be a collection of time series sampled from fixed points in space. However, when data sampling locations vary over time, as with mobile monitoring stations in meteorology and oceanography or with particle tracking velocimetry in experimental fluid dynamics, advanced interpolation techniques are required to project the data onto a fixed grid before carrying out the factorization. This interpolation is often expensive and inaccurate. This work proposes a method to decompose scattered data without interpolating. The approach is based on physics-constrained radial basis function regression to compute inner products in space and time. The method provides an analytical and mesh-independent decomposition in space and time, demonstrating higher accuracy than the traditional approach. Our results show that it is possible to distill the most relevant "components" even for measurements whose natural output is a distribution of data scattered in space and time, maintaining high accuracy and mesh independence.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Multi-objective optimization of the magnetic wi** process in dip-coating
Authors:
Fabio Pino,
Benoit Scheid,
Miguel Alfonso Mendez
Abstract:
Electromagnetic wi** systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wi**, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wi** effic…
▽ More
Electromagnetic wi** systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wi**, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wi** efficiency (2) maximal smoothness of the wi** meniscus, and (3) minimal Joule heating. We present the Pareto front, identifying the best wi** conditions given a set of weights for the three competing objectives. The optimization was based on a 1D steady-state integral model, whose prediction scales according to the Hartmann number (Ha). The optimization uses a multi-gradient approach, with gradients computed with a combination of finite differences and variational methods. The results show that the wi** efficiency depends solely on Ha and not the magnetic field distribution. Moreover, we show that the liquid thickness becomes insensitive to the intensity of the magnetic field above a certain threshold and that the current distribution (hence the Joule heating) is mildly affected by the magnetic field's intensity and shape.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
A meshless and binless approach to compute statistics in 3D Ensemble PTV
Authors:
Manuel Ratz,
Miguel A. Mendez
Abstract:
We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis fun…
▽ More
We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis function (RBF) formalism introduced Sperotto et al. (Meas Sci Technol, 33:094005, 2022) with a kernel estimate approach for the ensemble averaging of the RBF regressions. The computational cost for the RBF regression is alleviated using the partition of unity method (PUM). Three test cases are considered: (1) a 1D illustrative problem on a Gaussian process, (2) a 3D synthetic test case reproducing a 3D jet-like flow, and (3) an experimental dataset collected for an underwater jet flow at $\text{Re} = 6750$ using a four-camera 3D PTV system. For each test case, the method performances are compared to traditional binning approaches such as Gaussian weighting (Agüí and Jiménez, JFM, 185:447-468, 1987), local polynomial fitting (Agüera et al, Meas Sci Technol, 27:124011, 2016), as well as a binned version of the RBF statistics.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
An extension of the compound flow theory with shear and friction
Authors:
Jan Van den Berghe,
Miguel Alfonso Mendez,
Yann Bartosiewicz
Abstract:
Compound flows consist of two or more parallel compressible streams inside a duct. Its theoretical treatment has recently been applied to model ejectors, but also to post-process and to interpret CFD results. More precisely, it has been observed that compound flows can choke upstream of the geometrical throat. While it is widely known that friction can push the sonic section downstream, no mechani…
▽ More
Compound flows consist of two or more parallel compressible streams inside a duct. Its theoretical treatment has recently been applied to model ejectors, but also to post-process and to interpret CFD results. More precisely, it has been observed that compound flows can choke upstream of the geometrical throat. While it is widely known that friction can push the sonic section downstream, no mechanism has been identified to explain the movement in the opposite direction.
In this work, we extend the existing compound flow theory with shear and friction. The resulting model captures the up- and downstream movement of the sonic section. We show analytically that shear between the streams is the driving force behind the upstream movement by analysing the singularity of the governing equations in the sonic section. Additionally, we provide a quasi-third order approximation of the governing equations in the vicinity of the sonic section to alleviate potential numerical issues. Finally, we compare the predictions of the model with post-processed CFD results of a compound nozzle. We study the individual effects of shear and friction through an inviscid simulation for the isentropic case and a viscid simulation with a slip or no-slip condition at the wall to include shear with or without friction.
The proposed extension offers new possibilities in modelling and analysis of compound flows.
△ Less
Submitted 14 January, 2024;
originally announced January 2024.
-
Absolute and convective instabilities in a liquid film over a substrate moving against gravity
Authors:
Fabio Pino,
Miguel Alfonso Mendez,
Benoit Scheid
Abstract:
The drag-out problem for small Reynolds numbers (Re) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers (Ca), and Derjaguin's solution for large Ca. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the instability is unconditionally convective for Kapitza…
▽ More
The drag-out problem for small Reynolds numbers (Re) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers (Ca), and Derjaguin's solution for large Ca. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the instability is unconditionally convective for Kapitza number (Ka) smaller than 17 and becomes absolute for Ka>0.15 and Re^(1.7) for Re>10. For water (Ka=3400), the LLD solution is always convectively unstable. The absolute instability is observed only when the dip-coated film is additionally fed from above.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Characterization of a capillary driven flow in microgravity by means of optical technique
Authors:
Domenico Fiorini,
Louis Carbonnelle,
Alessia Simonini,
Johan Steelant,
David Seveno,
Miguel A. Mendez
Abstract:
The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models…
▽ More
The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models have been derived in configurations dominated by viscous forces. In this study, we experimentally investigate the wetting of a low-viscosity, highly wetting fluid in a reduced gravity environment. Our setup consisted of a transparent and diverging U-tube in which capillary forces sustain the liquid motion. Combining Particle Image Velocimetry (PIV) and high-speed backlighting visualization, the experimental campaign allowed for measuring the interface evolution and the velocity field within the liquid under varying gravity levels. This work reports on the preliminary results from the image velocimetry and shows that the velocity profile within the tube is close to parabolic until a short distance from the interface. Nevertheless, classic 1D models for capillary rise face difficulties reproducing the interface dynamics, suggesting that the treatment of the surface tension in these problems must be reviewed.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
Capillary driven flows in microgravity
Authors:
Domenico Fiorini,
Alessia Simonini,
Johan Steelant,
David Seveno,
Miguel A. Mendez
Abstract:
This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glyc…
▽ More
This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glycol (DPG). For the case of HF7200, we complement the interface measurements with Particle Tracking Velocimetry (PTV) to characterize the velocity fields underneath the moving meniscus. In the experiments with DPG, the liquid column reaches different heights within various experiments, and the measurements show a sharp reduction of the meniscus curvature when the contact line moves from a pre-wet to a dry substrate. In experiments with HFE7200, the interface always moves on a pre-wet surface. Yet a curvature reduction is observed due to the inertial forces on the underlying accelerating flow. The PTV measurements show that the distance from the interface within which the velocity profile adapts to the meniscus velocity shortens as the interface acceleration increases.
△ Less
Submitted 25 April, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks
Authors:
Pedro Afonso Marques,
Samuel Ahizi,
Miguel Alfonso Mendez
Abstract:
The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance b…
▽ More
The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance between three control volumes (the ullage vapor, the liquid, and the solid tank) with an Artificial Neural Network (ANN) for predicting the heat transfer coefficients from the current tank state. The proposed approach combines ideas from traditional data assimilation and multi-environment reinforcement learning, where an agent's training (model assimilation) is carried out simultaneously on multiple environments (systems). The real-time assimilation uses a mini-batch version of the Limited-memory Broyden-Fletcher-Goldfarb-Shanno with bounds (L-BFGS-B) and adjoint-based gradient computation for solving the underlying optimization problem. The approach is tested on synthetic datasets simulating multiple tanks undergoing different operation phases (pressurization, hold, long-term storage, and sloshing). The results show that the assimilation is robust against measurement noise and uses it to explore the parameter space further. Moreover, we show that sampling from multiple environments simultaneously accelerates the assimilation.
△ Less
Submitted 20 October, 2023; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Dynamic wetting experiment with nitrogen in a quasi-capillary tube
Authors:
Domenico Fiorini,
Alessia Simonini,
Johan Steelant,
David Seveno,
Miguel Alfonso Mendez
Abstract:
This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and hav…
▽ More
This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and having nitrogen vapor as the only ullage gas. During the experiments, the interface shape was tracked via image processing and used to fit a model from which the contact angle could be accurately determined. The results show that the dynamic contact angle evolution in advancing conditions is linearly linked to the Capillary number, with a slope depending on whether the interface moves over a dry or a pre-wet surface. However, the contact angle remains close to the one at equilibrium in receding conditions. To analyze the relation between contact angle and interface dynamics, we define an equivalent contact angle as the one that would make a spherical interface produce the same capillary pressure drop as the actual interface shape. The evolution of this equivalent contact angle proved to be independent of the evolution of the actual one, suggesting that the interface shape is not influenced by it. Finally, a theoretical analysis of the interface motion using a simplified model shows that viscous forces dominate the dam** of the interface for small tube sizes, while gravity and inertial forces dominate the oscillating dynamics of the liquid column for larger tubes.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
On the coupling instability of a gas jet im**ing on a liquid film
Authors:
David Barreiro-Villaverde,
Anne Gosset,
Marcos Lema,
Miguel A. Mendez
Abstract:
We investigate the dynamics of a gas jet im**ing on a thin liquid film. This configuration is relevant to the jet-wi** process and is unstable. In particular, we complement previous works that focused on the wi** of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wi** of liquids with much higher Kapitza numbers, more relevant to industrial processes.…
▽ More
We investigate the dynamics of a gas jet im**ing on a thin liquid film. This configuration is relevant to the jet-wi** process and is unstable. In particular, we complement previous works that focused on the wi** of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wi** of liquids with much higher Kapitza numbers, more relevant to industrial processes. The simulations are carried out by combining Volume of Fluid (VOF) and Large Eddy Simulation (LES), and the dynamics of the gas-liquid interaction is analyzed using extended multiscale Proper Orthogonal Decomposition (emPOD). The resolution and flow details captured by the simulations are unprecedented. The results show that, despite the vastly different wi** conditions, the dynamics of the gas-liquid interaction is remarkably similar. This opens new avenues to the study and the scaling of the jet-wi** process.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Dam** of three-dimensional waves on coating films dragged by moving substrates
Authors:
David Barreiro-Villaverde,
Anne Gosset,
Marcos Lema,
Miguel Alfonso Mendez
Abstract:
Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to…
▽ More
Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to three-dimensional disturbances is discussed with Direct Numerical Simulations (DNS), an in-house non-linear Integral Boundary Layer (IBL) film model, and Linear Stability Analysis (LSA). The thin film model, successfully validated with the DNS computations, implements a pseudo-spectral approach for the capillary terms that allows for investigating non-periodic surface tension dominated flows. The combination of these numerical tools allows for describing the mechanisms of capillary and non-linear dam**, and identifying the instability threshold of the coating processes. The results show that transverse modulations can be beneficial for the dam** of two-dimensional waves within the range of operational conditions considered in this study, typical of air-knife and slot-die coating.
△ Less
Submitted 29 June, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Experimental analysis of heat and mass transfer in non-isothermal sloshing using a model-based inverse method
Authors:
Pedro Marques,
Alessia Simonini,
Laura Peveroni,
Miguel Alfonso Mendez
Abstract:
Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindri…
▽ More
Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindrical reservoir undergoing sloshing-induced thermal de-stratification. We use a 0D model-based inverse method to retrieve the heat and mass transfer coefficients in planar and swirl sloshing conditions from the temperature and pressure measurements in the liquid and the ullage gas. The experiments were carried out in the SHAKESPEARE shaking table of the von Karman Institute in a cuboid quartz cell with a cylindrical cut-out of 80 mm diameter in the centre, filled up to 60mm with the cryogenic replacement fluid HFE-7200. A thermal stratification with 25 K difference between the ullage gas and liquid was set as the initial conditions. A pressure drop of 90% in the ullage gas was documented in swirling conditions. Despite its simplicity, the model could predict the system's thermodynamic evolution once the proper transfer coefficients were derived.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
A Robust Data-Driven Model for Flap** Aerodynamics under different hovering kinematics
Authors:
Andre Calado,
Romain Poletti,
Lilla K. Koloszar,
Miguel A. Mendez
Abstract:
Flap** Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flap** wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to pred…
▽ More
Flap** Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flap** wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to predict the lift and drag coefficients within a flap** cycle. The model is derived for a rigid ellipsoid wing with different parameterized kinematics in hovering conditions. The proposed ROM is built via a two-stage regression. The first stage, defined as `in-cycle' (IC), computes the parameters of a regression linking the aerodynamic coefficients to the instantaneous wing state. The second stage, `out-of-cycle' (OOC), links the IC weights to the flap** features that define the flap** motion. The training and test dataset were generated via high-fidelity simulations using the overset method, spanning a wide range of Reynolds numbers and flap** kinematics. The two-stage regressor combines Ridge regression and Gaussian Process (GP) regression to provide estimates of the model uncertainties. The proposed ROM shows accurate aerodynamic predictions for widely varying kinematics. The model performs best for smooth kinematics that generate a stable Leading Edge Vortex (LEV). Remarkably accurate predictions are also observed in dynamic scenarios where the LEV is partially shed, the non-circulatory forces are considerable, and the wing encounters its own wake.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Linear and Nonlinear Dimensionality Reduction from Fluid Mechanics to Machine Learning
Authors:
Miguel A. Mendez
Abstract:
Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for…
▽ More
Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for linear and nonlinear dimensionality reduction techniques. Differences and links between autoencoders and manifold learning methods are highlighted, and popular nonlinear techniques such as kernel Principal Component Analysis (kPCA), isometric feature learning (ISOMAPs) and Locally Linear Embedding (LLE) are placed in this framework. These algorithms are benchmarked in three classic problems: 1) filtering, 2) identification of oscillatory patterns, and 3) data compression. Their performances are compared against the traditional Proper Orthogonal Decomposition (POD) to provide a perspective on their diffusion in fluid dynamics.
△ Less
Submitted 15 December, 2022; v1 submitted 16 August, 2022;
originally announced August 2022.
-
A 1D Model for the Unsteady Gas Dynamics of Ejectors
Authors:
Jan Van den Berghe,
Bruno R. B. Dias,
Yann Bartosiewicz,
Miguel A. Mendez
Abstract:
We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow…
▽ More
We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow. The model was then benchmarked against 2D URANS simulations to predict the ejector response to a sudden change in operating conditions, producing traveling waves. The results show that the model can correctly predict the ejector performance and the stream-wise evolution of relevant integral quantities (e.g. mass flow rates and momentum) in both steady and transient conditions.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Data-driven modeling of hypersonic reentry flow with heat and mass transfer
Authors:
Leonidas Gkimisis,
Bruno Ricardo Barros Dias,
James B. Scoggins,
Thierry Magin,
Miguel Alfonso Mendez,
Alessandro Turchi
Abstract:
The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This…
▽ More
The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This work proposes data-driven surrogate models to predict the flow, and mixture properties along the stagnation streamline of hypersonic flows past spherical objects. Surrogate models are designed to predict velocity, pressure, temperature, density and air composition as a function of the object's radius, velocity, reentry altitude and surface temperature. These models are trained with data produced by numerical simulation of the quasi-one-dimensional Navier-Stokes formulation and a selected Earth atmospheric model. Physics-constrained parametric functions are constructed for each flow variable of interest, and artificial neural networks are used to map the model parameters to the model's inputs. Surrogate models were also developed to predict surface quantities of interest for the case of nonreacting or ablative carbon-based surfaces, providing alternatives to semiempirical correlations. A validation study is presented for all the developed models, and their predictive capabilities are showcased along selected reentry trajectories of space debris from low-Earth orbits.
△ Less
Submitted 21 August, 2023; v1 submitted 12 August, 2022;
originally announced August 2022.
-
Effect of inertia on the dynamic contact angle in oscillating menisci
Authors:
Domenico Fiorini,
Miguel Alfonso Mendez,
Alessia Simonini,
Johan Steelant,
David Seveno
Abstract:
The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle i…
▽ More
The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle in accelerating conditions for two different fluids, i.e. HFE7200 (perfect wetting) and demineralized water. The set-up consists of a U-shaped quasi-capillary tube in which the liquid column oscillates in response to a pressure step on one of the two sides. We obtained the evolution of the interface shape from high-speed back-light visualization, and we fit interface models to the experimental data to estimate the contributions of all the governing forces and the contact angle. Traditional interface models fail to predict the interface shape and its contact angle at large interface and contact line accelerations. We propose a new model to account for the acceleration, and we discuss its impact on the measurement of the transient contact angle.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Control of a Wind-Turbine via Machine Learning techniques
Authors:
L. Schena,
E. Gillyns,
W. Munters,
S. Buckingham,
M. A. Mendez
Abstract:
This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-der…
▽ More
This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-derivative (PID) regulator in a numerical environment using Blade Element Momentum theory for computing the aerodynamic torque and the blade loads. The results showed that the model-free approaches could increase power harvesting while reducing wind turbine loads.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
A RANS approach to the Meshless Computation of Pressure Fields From Image Velocimetry
Authors:
Pietro Sperotto,
Sandra Pieraccini,
Miguel A. Mendez
Abstract:
We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correla…
▽ More
We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correlation-based Particle Image Velocimetry (PIV). The RANS extension includes the Reynolds stresses into the constrained least square problem. We test the approach on a numerical database featuring a Backward Facing Step (BFS) with a Reynolds number of 6400 (defined with respect to the inlet velocity and step height), obtained via Direct Numerical Simulation (DNS).
△ Less
Submitted 11 July, 2022;
originally announced July 2022.
-
Evolution of waves in liquid films on moving substrates
Authors:
Tsvetelina Ivanova,
Fabio Pino,
Benoit Scheid,
Miguel A. Mendez
Abstract:
Accurate and computationally accessible models of liquid film flows allow for optimizing coating processes such as hot-dip galvanization and vertical slot-die coating. This paper extends the classic three-dimensional integral boundary layer (IBL) model for falling liquid films (FF) to account for a moving substrate (MS). We analyze the stability of the liquid films on vertically moving substrates…
▽ More
Accurate and computationally accessible models of liquid film flows allow for optimizing coating processes such as hot-dip galvanization and vertical slot-die coating. This paper extends the classic three-dimensional integral boundary layer (IBL) model for falling liquid films (FF) to account for a moving substrate (MS). We analyze the stability of the liquid films on vertically moving substrates in a linear and a nonlinear setting. In the linear analysis, we derive the dispersion relation and the temporal growth rates of an infinitesimal disturbance using normal modes and linearized governing equations. In the nonlinear analysis, we consider disturbances of finite size and numerically compute their evolution using the set of nonlinear equations in which surface tension has been removed. We present the region of (linear) stability of both FF and MS configurations, and we place the operating conditions of an industrial galvanizing line in these maps. A wide range of flow conditions was analyzed and shown to be stable according to linear and nonlinear stability analyses. Moreover, the nonlinear analysis, carried out in the absence of surface tension, reveals a nonlinear stabilizing mechanism for the interface dynamics of a liquid film dragged by an upward-moving substrate.
△ Less
Submitted 18 January, 2023; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Analysis of an unsteady quasi-capillary channel flow with Time Resolved PIV and RBF-based super resolution
Authors:
Manuel Ratz,
Domenico Fiorini,
Alessia Simonini,
Christian Cierpka,
Miguel A. Mendez
Abstract:
We investigate the behaviour of accelerating contact lines in an unsteady quasi-capillary channel flow. The configuration consists of a liquid column that moves along a vertical 2D channel, open to the atmosphere and driven by a controlled pressure head. Both advancing and receding contact lines were analyzed to test the validity of classic models for dynamic wetting and to study the flow field ne…
▽ More
We investigate the behaviour of accelerating contact lines in an unsteady quasi-capillary channel flow. The configuration consists of a liquid column that moves along a vertical 2D channel, open to the atmosphere and driven by a controlled pressure head. Both advancing and receding contact lines were analyzed to test the validity of classic models for dynamic wetting and to study the flow field near the interface. The operating conditions are characterized by a large acceleration, thus dominated by inertia. The shape of the moving meniscus was retrieved using Laser-Induced Fluorescence (LIF)-based image processing while the flow field near was analyzed via Time-Resolved Particle Image Velocimetry (TR-PIV). The TR-PIV measurements were enhanced in the post-processing, using a combination of Proper Orthogonal Decomposition (POD) and Radial Basis Functions (RBF) to achieve super-resolution of the velocity field. Large counter-rotating vortices were observed, and their evolution was monitored in terms of the maximum intensity of the Q-field. The results show that classic contact angle laws based on interface velocity cannot describe the evolution of the contact angle at a macroscopic scale. Moreover, the impact of the interface dynamics on the flow field is considerable and extends several capillary lengths below the interface.
△ Less
Submitted 10 May, 2022; v1 submitted 28 February, 2022;
originally announced February 2022.
-
Challenges and Opportunities for Machine Learning in Fluid Mechanics
Authors:
M. A. Mendez,
J. Dominique,
M. Fiore,
F. Pino,
P. Sperotto,
J. Van den Berghe
Abstract:
Big data and machine learning are driving comprehensive economic and social transformations and are rapidly re-sha** the toolbox and the methodologies of applied scientists. Machine learning tools are designed to learn functions from data with little to no need of prior knowledge. As continuous developments in experimental and numerical methods improve our ability to collect high-quality data, m…
▽ More
Big data and machine learning are driving comprehensive economic and social transformations and are rapidly re-sha** the toolbox and the methodologies of applied scientists. Machine learning tools are designed to learn functions from data with little to no need of prior knowledge. As continuous developments in experimental and numerical methods improve our ability to collect high-quality data, machine learning tools become increasingly viable and promising also in disciplines rooted in physical principles. These notes explore how machine learning can be integrated and combined with more classic methods in fluid dynamics. After a brief review of the machine learning landscape, we show how many problems in fluid mechanics can be framed as machine learning problems and we explore challenges and opportunities. We consider several relevant applications: aeroacoustic noise prediction, turbulence modelling, reduced-order modelling and forecasting, meshless integration of (partial) differential equations, super-resolution and flow control. While this list is by no means exhaustive, the presentation will provide enough concrete examples to offer perspectives on how machine learning might impact the way we do research and learn from data.
△ Less
Submitted 13 April, 2024; v1 submitted 25 February, 2022;
originally announced February 2022.
-
Comparative analysis of machine learning methods for active flow control
Authors:
Fabio Pino,
Lorenzo Schena,
Jean Rabault,
Miguel A. Mendez
Abstract:
Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework…
▽ More
Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework of the model-free control problem, bringing together all methods as black-box optimization problems. Then, we test the control algorithms on three test cases. These are (1) the stabilization of a nonlinear dynamical system featuring frequency cross-talk, (2) the wave cancellation from a Burgers' flow and (3) the drag reduction in a cylinder wake flow. We present a comprehensive comparison to illustrate their differences in exploration versus exploitation and their balance between `model capacity' in the control law definition versus `required complexity'. We believe that such a comparison paves the way toward the hybridization of the various methods, and we offer some perspective on their future development in the literature on flow control problems.
△ Less
Submitted 9 November, 2022; v1 submitted 23 February, 2022;
originally announced February 2022.
-
Physics-constrained machine learning for thermal turbulence modelling at low Prandtl numbers
Authors:
Matilde Fiore,
Lilla Koloszar,
Miguel Alfonso Mendez,
Matthieu Duponcheel,
Yann Bartosiewicz
Abstract:
Liquid metals play a central role in new generation liquid metal cooled nuclear reactors, for which numerical investigations require the use of appropriate thermal turbulence models for low Prandtl number fluids. Given the limitations of traditional modelling approaches and the increasing availability of high-fidelity data for this class of fluids, we propose a Machine Learning strategy for the mo…
▽ More
Liquid metals play a central role in new generation liquid metal cooled nuclear reactors, for which numerical investigations require the use of appropriate thermal turbulence models for low Prandtl number fluids. Given the limitations of traditional modelling approaches and the increasing availability of high-fidelity data for this class of fluids, we propose a Machine Learning strategy for the modelling of the turbulent heat flux. A comprehensive algebraic mathematical structure is derived and physical constraints are imposed to ensure attractive properties promoting applicability, robustness and stability. The closure coefficients of the model are predicted by an Artificial Neural Network (ANN) which is trained with DNS data at different Prandtl numbers. The validity of the approach was verified through a priori and a posteriori validation for two and three-dimensional liquid metal flows. The model provides a complete vectorial representation of the turbulent heat flux and the predictions fit the DNS data in a wide range of Prandtl numbers (Pr=0.01-0.71). The comparison with other existing thermal models shows that the methodology is very promising.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Statistical Treatment, Fourier and Modal Decomposition
Authors:
Miguel Alfonso Mendez
Abstract:
These are lecture notes for the lecture "Statistical Treatment, Fourier and Modal Decompositions", given at the VKI Lecture series "Fundamentals and Recent Advances in Particle Image Velocimetry and Lagrangian Particle Tracking". The course was held at the von Karman Institute for fluid dynamics from 15 November to 18 November 2021. This lecture provides a guided tour through the processing of dat…
▽ More
These are lecture notes for the lecture "Statistical Treatment, Fourier and Modal Decompositions", given at the VKI Lecture series "Fundamentals and Recent Advances in Particle Image Velocimetry and Lagrangian Particle Tracking". The course was held at the von Karman Institute for fluid dynamics from 15 November to 18 November 2021. This lecture provides a guided tour through the processing of data acquired via image velocimetry. Far from being an exhaustive account of the field, which would require an entire course on its own, the scope is to provide a hands-on tutorial. This begins with basic statistical treatment, briefly reviews frequency and modal analysis, and conclude with more advanced research topics such as multiscale modal decompositions and nonlinear dimensionality reduction. The material covered should hopefully propel newcomers into the subject while remaining of interest to experienced practitioners. All the codes related to this lecture are made available on a github repository.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Artificial Neural Networks Modelling of Wall Pressure Spectra Beneath Turbulent Boundary Layers
Authors:
J. Dominique,
J. Van den Berghe,
C. Schram,
M. A. Mendez
Abstract:
We analyse and compare various empirical models of wall pressure spectra beneath turbulent boundary layers and propose an alternative machine learning approach using Artificial Neural Networks (ANN). The analysis and the training of the ANN are performed on data from experiments and high-fidelity simulations by various authors, covering a wide range of flow conditions. We present a methodology to…
▽ More
We analyse and compare various empirical models of wall pressure spectra beneath turbulent boundary layers and propose an alternative machine learning approach using Artificial Neural Networks (ANN). The analysis and the training of the ANN are performed on data from experiments and high-fidelity simulations by various authors, covering a wide range of flow conditions. We present a methodology to extract all the turbulent boundary layer parameters required by these models, also considering flows experiencing strong adverse pressure gradients. Moreover, the database is explored to unveil important dependencies within the boundary layer parameters and to propose a possible set of features from which the ANN should predict the wall pressure spectra. The results show that the ANN outperforms traditional models in adverse pressure gradients, and its predictive capabilities generalise better over the range of investigated conditions. The analysis is completed with a deep ensemble approach for quantifying the uncertainties in the model prediction and integrated gradient analysis of the model sensitivity to its inputs. Uncertainties and sensitivities allow for identifying the regions where new training data would be most beneficial to the model's accuracy, thus opening the path towards a self-calibrating modelling approach.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
A Meshless Method to Compute Pressure Fields from Image Velocimetry
Authors:
Pietro Sperotto,
Sandra Pieraccini,
Miguel A. Mendez
Abstract:
We propose a meshless method to compute pressure fields from image velocimetry data, regardless of whether this is available on a regular grid as in cross-correlation based velocimetry or on scattered points as in tracking velocimetry. The proposed approach is based on Radial Basis Functions (RBFs) regression and relies on the solution of two constrained least square problems. The first one is the…
▽ More
We propose a meshless method to compute pressure fields from image velocimetry data, regardless of whether this is available on a regular grid as in cross-correlation based velocimetry or on scattered points as in tracking velocimetry. The proposed approach is based on Radial Basis Functions (RBFs) regression and relies on the solution of two constrained least square problems. The first one is the regression of the measurements to create an analytic representation of the velocity field. This regression can be constrained to impose boundary conditions (e.g. no-slip velocity on a wall or inlet conditions) or differential constraints (e.g. the solenoidal condition for an incompressible flow). The second one is the meshless integration of the pressure Poisson equation, achieved by seeking a solution in the form of a RBF expansion and using constraints to impose boundary conditions.
We first illustrate the derivation of the two least square problems and the numerical techniques implemented for their solution. Then, we showcase the method with three numerical test cases of growing complexity. These are a 2D Gaussian Vortex, a 2D flow past a cylinder from CFD and a 3D Stokes flow past a sphere. For each case, we consider randomly sampled vector fields simulating particle tracking measurements and analyze the sensitivity to noise and seeding density.
△ Less
Submitted 9 May, 2022; v1 submitted 23 December, 2021;
originally announced December 2021.
-
On the Dynamics of the Jet Wi** Process: Numerical Simulations and Modal Analysis
Authors:
David Barreiro-Villaverde,
Anne Gosset,
Miguel A. Mendez
Abstract:
We analyze the flow of a planar gas jet im**ing on a thin film, dragged by a vertical moving wall. In the coating industry, this configuration is known as jet wi**, a process in which im**ing jets control the thickness of liquid coatings on flat plates withdrawn vertically from a coating bath. We present three-dimensional (3D) two-phase flow simulations combining Large Eddy Simulation (LES)…
▽ More
We analyze the flow of a planar gas jet im**ing on a thin film, dragged by a vertical moving wall. In the coating industry, this configuration is known as jet wi**, a process in which im**ing jets control the thickness of liquid coatings on flat plates withdrawn vertically from a coating bath. We present three-dimensional (3D) two-phase flow simulations combining Large Eddy Simulation (LES) and Volume of Fluid (VOF). Three wi** configurations are simulated and the results are validated with experimental data from previous works. Multiscale modal analysis is used to analyze the dynamic interaction between the gas flow and the liquid film. In particular, we present a combination of Multiscale Proper Orthogonal decomposition (mPOD) and correlation analysis. The mPOD is used to identify the dominant travelling wave pattern in the liquid film flow, and the temporal structures are used to determine the most correlated flow features in the gas jet. This allows for revealing a two-dimensional (2D) mechanism for wave formation in the liquid coat. Finally, we use the numerical results to analyze the validity of some of the critical assumptions underpinning the derivation of integral film models of jet wi**.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
On Koopman Operator for Burgers' Equation
Authors:
Mikhael Balabane,
Miguel A Mendez,
Sara Najem
Abstract:
We consider the flow of Burgers' equation on an open set of (small) functions in $L^2([0,1])$. We derive explicitly the Koopman decomposition of the Burgers' flow. We identify the frequencies and the coefficients of this decomposition as eigenvalues and eigenfunctionals of the Koopman operator. We prove the convergence of the Koopman decomposition for $t>0$ for small Cauchy data, and up to $t=0$ f…
▽ More
We consider the flow of Burgers' equation on an open set of (small) functions in $L^2([0,1])$. We derive explicitly the Koopman decomposition of the Burgers' flow. We identify the frequencies and the coefficients of this decomposition as eigenvalues and eigenfunctionals of the Koopman operator. We prove the convergence of the Koopman decomposition for $t>0$ for small Cauchy data, and up to $t=0$ for regular Cauchy data. The convergence up to $t=0$} leads to a `completeness' property for the basis of Koopman modes. We construct all modes and eigenfunctionals, including the eigenspaces involved in geometric multiplicity. This goes beyond the summation formulas provided by (Page & Kerswell, 2018), where only one term per eigenvalue was given. A numeric illustration of the Koopman decomposition is given and the Koopman eigenvalues compared to the eigenvalues of a Dynamic Mode Decomposition (DMD).
△ Less
Submitted 24 April, 2021; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Dynamics of the Jet Wi** Process via Integral Models
Authors:
M. A. Mendez,
A. Gosset,
B. Scheid,
M. Balabane,
J. -M. Buchlin
Abstract:
The jet wi** process is a cost-effective coating technique that uses im**ing gas jets to control the thickness of a liquid layer dragged along a moving strip. This process is fundamental in various coating industries (mainly in hot-dip galvanizing) and is characterized by an unstable interaction between the gas jet and the liquid film that results in wavy final coating films. To understand the…
▽ More
The jet wi** process is a cost-effective coating technique that uses im**ing gas jets to control the thickness of a liquid layer dragged along a moving strip. This process is fundamental in various coating industries (mainly in hot-dip galvanizing) and is characterized by an unstable interaction between the gas jet and the liquid film that results in wavy final coating films. To understand the dynamics of the wave formation, we extend classic laminar boundary layer models for falling films to the jet wi** problem, including the self-similar integral boundary layer (IBL) and the weighted integral boundary layer (WIBL) models. Moreover, we propose a transition and turbulence model (TTBL) to explore modelling extensions to larger Reynolds numbers and to analyze the impact of the modelling strategy on the liquid film dynamics. The validity of the long-wave formulation was first analyzed on a simpler problem, consisting of a liquid film falling over an upward-moving wall, using Volume Of Fluid (VOF) simulations. This validation proved the robustness of the integral formulation in conditions that are well outside their theoretical limits of validity. Finally, the three models were used to study the response of the liquid coat to harmonic and non-harmonic oscillations and pulsations in the im**ing jet. The impact of these disturbances on the average coating thickness and wave amplitude is analyzed, and the range of dimensionless frequencies yielding maximum disturbance amplification is presented.
△ Less
Submitted 21 November, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
MODULO: A software for Multiscale Proper Orthogonal Decomposition of data
Authors:
Davide Ninni,
Miguel A. Mendez
Abstract:
In the era of the Big Data revolution, methods for the automatic discovery of regularities in large datasets are becoming essential tools in applied sciences. This article presents an open software package, named MODULO (MODal mULtiscale pOd), to perform the Multiscale Proper Orthogonal Decomposition (mPOD) of numerical and experimental data. This novel decomposition combines Multi-resolution Anal…
▽ More
In the era of the Big Data revolution, methods for the automatic discovery of regularities in large datasets are becoming essential tools in applied sciences. This article presents an open software package, named MODULO (MODal mULtiscale pOd), to perform the Multiscale Proper Orthogonal Decomposition (mPOD) of numerical and experimental data. This novel decomposition combines Multi-resolution Analysis (MRA) and standard Proper Orthogonal Decomposition (POD) to allow for the optimal compromise between decomposition convergence and spectral purity of its modes. The software is equipped with a Graphical User Interface (GUI) and enriched by numerous examples and video tutorials (see Youtube channel MODULO mPOD). The MATLAB source codes and an executable for Windows users can be downloaded at \url{https://github.com/mendezVKI/MODULO/releases}; a collection of exercises in Matlab and Python are provided in \url{https://github.com/mendezVKI/MODULO}
△ Less
Submitted 11 November, 2020; v1 submitted 25 April, 2020;
originally announced April 2020.
-
Multiscale Proper Orthogonal Decomposition (mPOD) of TR-PIV data-- a Case Study on Stationary and Transient Cylinder Wake Flows
Authors:
Miguel A Mendez,
David Hess,
Bo B Watz,
Jean-Marie Buchlin
Abstract:
Data-driven decompositions of Particle Image Velocimetry (PIV) measurements are widely used for a variety of purposes, including the detection of coherent features (e.g., vortical structures), filtering operations (e.g., outlier removal or random noise mitigation), data reduction and compression. This work presents the application of a novel decomposition method, referred to as Multiscale Proper O…
▽ More
Data-driven decompositions of Particle Image Velocimetry (PIV) measurements are widely used for a variety of purposes, including the detection of coherent features (e.g., vortical structures), filtering operations (e.g., outlier removal or random noise mitigation), data reduction and compression. This work presents the application of a novel decomposition method, referred to as Multiscale Proper Orthogonal Decomposition ( Mendez J Fluid Mech 870:988-1036, 2019) to Time-Resolved PIV (TR-PIV) measurement. This method combines Multiresolution Analysis (MRA) and standard Proper Orthogonal Decomposition (POD) to achieve a compromise between decomposition convergence and spectral purity of the resulting modes.
The selected test case is the flow past a cylinder in both stationary and transient conditions, producing a frequency-varying Karman vortex street. The results of the mPOD are compared to the standard POD, the Discrete Fourier Transform (DFT) and the Dynamic Mode Decomposition (DMD). The mPOD is evaluated in terms of decomposition convergence and time-frequency localization of its modes. The multiscale modal analysis allows for revealing beat phenomena in the stationary cylinder wake, due to the three-dimensional nature of the flow, and to correctly identify the transition from various stationary regimes in the transient test case.
△ Less
Submitted 7 April, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
Multi-Scale Proper Orthogonal Decomposition of Complex Fluid Flows
Authors:
M. A. Mendez,
M. Balabane,
J. -M. Buchlin
Abstract:
Data-driven decompositions are becoming essential tools in fluid dynamics, allowing for tracking the evolution of coherent patterns in large datasets, and for constructing low order models of complex phenomena. In this work, we analyze the main limits of two popular decompositions, namely the Proper Orthogonal Decomposition (POD) and the Dynamic Mode Decomposition (DMD), and we propose a novel dec…
▽ More
Data-driven decompositions are becoming essential tools in fluid dynamics, allowing for tracking the evolution of coherent patterns in large datasets, and for constructing low order models of complex phenomena. In this work, we analyze the main limits of two popular decompositions, namely the Proper Orthogonal Decomposition (POD) and the Dynamic Mode Decomposition (DMD), and we propose a novel decomposition which allows for enhanced feature detection capabilities. This novel decomposition is referred to as Multiscale Proper Orthogonal Decomposition (mPOD) and combines Multiresolution Analysis (MRA) with a standard POD. Using MRA, the mPOD splits the correlation matrix into the contribution of different scales, retaining non-overlap** portions of the correlation spectra; using the standard POD, the mPOD extracts the optimal basis from each scale. After introducing a matrix factorization framework for data-driven decompositions, the MRA is formulated via 1D and 2D filter banks for the dataset and the correlation matrix respectively. The validation of the mPOD, and a comparison with the Discrete Fourier Transform (DFT), DMD and POD are provided in three test cases. These include a synthetic test case, a numerical simulation of a nonlinear advection-diffusion problem, and an experimental dataset obtained by the Time-Resolved Particle Image Velocimetry (TR-PIV) of an im**ing gas jet. For each of these examples, the decompositions are compared in terms of convergence, feature detection capabilities, and time-frequency localization.
△ Less
Submitted 30 March, 2019; v1 submitted 25 April, 2018;
originally announced April 2018.