-
Laser frequency stabilization by modulation transfer spectroscopy and balanced detection of molecular iodine for laser cooling of ${}^{174}$Yb
Authors:
Álvaro M. G. de Melo,
Hector Letellier,
Apoorva Apoorva,
Antoine Glicenstein,
Robin Kaiser
Abstract:
We report laser frequency stabilization by the combination of modulation transfer spectroscopy and balanced detection of a relatively weak hyperfine transition of the R(158)25-0 line of molecular iodine (${}^{127}$I$_{2}$), which is used as a new frequency reference for laser trap** and cooling of ${}^{174}$Yb on the $^{1}S_{0} - {}^{3}P_{1}$ transition. The atomic cloud is characterized by time…
▽ More
We report laser frequency stabilization by the combination of modulation transfer spectroscopy and balanced detection of a relatively weak hyperfine transition of the R(158)25-0 line of molecular iodine (${}^{127}$I$_{2}$), which is used as a new frequency reference for laser trap** and cooling of ${}^{174}$Yb on the $^{1}S_{0} - {}^{3}P_{1}$ transition. The atomic cloud is characterized by time-of-flight measurements, and an on-resonance optical depth of up to 47 is obtained. We show laser noise reduction and characterize the short-term laser frequency instability by the Allan deviation of the laser fractional frequency. The minimum measured value is 3.9 x $10^{-13}$ at 0.17 s of averaging time.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Loading of a large Yb MOT on the $^1$S$_0$-$^1$P$_1$ transition
Authors:
Hector Letellier,
Álvaro Mitchell Galvão de Melo,
Anaïs Dorne,
Robin Kaiser
Abstract:
We present an experimental setup to laser cool and trap a large number of Ytterbium atoms. Our design uses an oven with an array of microtubes for efficient collimation of the atomic beam and we implement a magneto-optical trap of $^{174}$Yb on the $^1$S$_0$-$^1$P$_1$ transition at 399nm. Despite the absence of a Zeeman slower, we are able to trap up to $N = 10^9$ atoms. We precisely characterize…
▽ More
We present an experimental setup to laser cool and trap a large number of Ytterbium atoms. Our design uses an oven with an array of microtubes for efficient collimation of the atomic beam and we implement a magneto-optical trap of $^{174}$Yb on the $^1$S$_0$-$^1$P$_1$ transition at 399nm. Despite the absence of a Zeeman slower, we are able to trap up to $N = 10^9$ atoms. We precisely characterize our atomic beam, the loading rate of the magneto-optical trap and several loss mechanisms relevant for trap** a large number of atoms.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Optimization of diamond optomechanical crystal cavities
Authors:
Flavio Moraes,
Gabriel H. M. de Aguiar,
Emerson G. de Melo,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to…
▽ More
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to produce diamond optomechanical crystal (OMC) cavities operating at the high-cooperativity regime (close to unity) at room temperature.
△ Less
Submitted 3 July, 2022;
originally announced July 2022.
-
Multi-objective Inverse Design of Solid-state Quantum Emitter Single-photon Sources
Authors:
Emerson G. Melo,
William Eshbaugh,
Edward B. Flagg,
Marcelo Davanco
Abstract:
Single solid-state quantum emitters offer considerable potential for the implementation of sources of indistinguishable single-photons, which are central to many photonic quantum information systems. Nanophotonic geometry optimization with multiple performance metrics is imperative to convert a bare quantum emitter into a single-photon source that approaches the necessary levels of purity, indisti…
▽ More
Single solid-state quantum emitters offer considerable potential for the implementation of sources of indistinguishable single-photons, which are central to many photonic quantum information systems. Nanophotonic geometry optimization with multiple performance metrics is imperative to convert a bare quantum emitter into a single-photon source that approaches the necessary levels of purity, indistinguishability, and brightness for quantum photonics. We present an inverse design methodology that simultaneously targets two important figures-of-merit for high-performance quantum light sources: the Purcell radiative rate enhancement and the coupling efficiency into a desired light collection channel. We explicitly address geometry-dependent power emission, a critical but often overlooked aspect of gradient-based optimization of quantum emitter single-photon sources. We illustrate the efficacy of our method through the design of a single-photon source based on a quantum emitter in a GaAs nanophotonic structure that provides a Purcell factor $F_p=21$ with a 94% waveguide coupling efficiency, while respecting a geometric constraint to minimize emitter decoherence by etched sidewalls. Our results indicate that multi-objective inverse design can yield competitive performance with more favorable trade-offs than conventional approaches based on pre-established waveguide or cavity geometries.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
Tunable THz Switch-Filter Based on Magneto-Plasmonic Graphene Nanodisk
Authors:
Victor Dmitriev,
Geraldo Melo,
Wagner Castro
Abstract:
We propose and analyze a multifunctional THz device which can operate as a tunable switch and a filter. The device consists of a circular graphene nanodisk coupled to two nanoribbons oriented at $90^\circ$ to each other. The graphene elements are placed on a dielectric substrate. The nanodisk is magnetized by a DC magnetic field normal to its plane. The physical principle of the device is based on…
▽ More
We propose and analyze a multifunctional THz device which can operate as a tunable switch and a filter. The device consists of a circular graphene nanodisk coupled to two nanoribbons oriented at $90^\circ$ to each other. The graphene elements are placed on a dielectric substrate. The nanodisk is magnetized by a DC magnetic field normal to its plane. The physical principle of the device is based on the propagation of surface plasmon-polariton waves in the graphene nanoribbons and excitation of dipole modes in the nanodisk. Numerical simulations show that 0.61T DC magnetic field provides transmission (regime ON) at the frequency 5.33 THz with the bandwidth 12.7$\%$ and filtering with the Q-factor equals to 7.8. At the central frequency, the insertion loss is around -2 dB and the reflection coefficient is -43 dB. The regime OFF can be achieved by means of switching DC magnetic field to zero value or by switching chemical potential of the nanodisk to zero with the ON/OFF ratio better than 20 dB. A small central frequency tuning by chemical potential is possible with a fixed DC magnetic field.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Graphene-Based Multifunctional Three-Port Far-Infrared Components
Authors:
Victor Dmitriev,
Geraldo Melo,
Wagner Castro
Abstract:
Two graphene-based T-shaped multifunctional components for THz and Far-Infrared regions are proposed and analyzed. The first component can serve as a divider, a switch and a dynamically controllable filter. This T-junction presents a circular graphene resonator and three graphene waveguides with surface plasmon-polariton waves connected frontally to the resonator. The resonator can be adjusted to…
▽ More
Two graphene-based T-shaped multifunctional components for THz and Far-Infrared regions are proposed and analyzed. The first component can serve as a divider, a switch and a dynamically controllable filter. This T-junction presents a circular graphene resonator and three graphene waveguides with surface plasmon-polariton waves connected frontally to the resonator. The resonator can be adjusted to work with dipole, quadrupole or hexapole modes. The graphene elements are deposited on a $SiO_{2}$ (silica) and $Si$ (silicon) two-layer substrate. The dynamical control and switching of the component is provided by the electrostatic field which defines the graphene Fermi energy. Numerical simulations show that the first component in the division regime (which is also the regime ON) has the transmission coefficient -4.3 dB at the central frequency for every of the two output ports and the FWHM is 9.5$\%$. In the OFF regime, the isolation of the two output ports from the input one is about -30 dB. The second component is a T-junction without resonator which fulfils the function of the divider-switch in more than octave frequency band.
△ Less
Submitted 23 January, 2020;
originally announced February 2020.
-
THz graphene W-shaped three-port circulator with dynamical control
Authors:
Victor Dmitriev,
Wagner Castro,
Geraldo Melo,
Cristiano Braga,
Daimam Zimmer
Abstract:
We propose a new graphene-based THz circulator. It consists of a circular graphene resonator and three graphene nanoribbon waveguides of W-geometry placed on a dilectric substrate. Surface plasmon-polariton waves propagate in the waveguides. The nanoribbon excites in the resonator dipole resonance. Nonreciprocity of the device is defined by nonsymmetry of the conductivity tensor of the magnetized…
▽ More
We propose a new graphene-based THz circulator. It consists of a circular graphene resonator and three graphene nanoribbon waveguides of W-geometry placed on a dilectric substrate. Surface plasmon-polariton waves propagate in the waveguides. The nanoribbon excites in the resonator dipole resonance. Nonreciprocity of the device is defined by nonsymmetry of the conductivity tensor of the magnetized graphene. The circulator with the central frequency 7.5 THz has the bandwidth 4.25\% for isolation -15 dB, insertion loss -2.5 dB. Applied DC magnetic field is 0.56T and Fermi energy of graphene $ε_F=0.15$eV. The Fermi energy allows one to control dynamically the circulator responses.
△ Less
Submitted 4 November, 2019;
originally announced January 2020.
-
Tunable THz and infrared plasmonic filter and switches based on circular graphene resonator with 90° bending of output port
Authors:
Victor Dmitriev,
Geraldo Melo,
Wagner Castro
Abstract:
Two types of novel graphene-based components, namely, filters and electro-optical switches in guided wave configuration are suggested and analysed. The filters differ from the known ones with collinear orientation of the input and output waveguides by geometry and symmetry. The components consist of a circular graphene disk and two nanoribbons oriented at $90^\circ$ to each other in the plane of t…
▽ More
Two types of novel graphene-based components, namely, filters and electro-optical switches in guided wave configuration are suggested and analysed. The filters differ from the known ones with collinear orientation of the input and output waveguides by geometry and symmetry. The components consist of a circular graphene disk and two nanoribbons oriented at $90^\circ$ to each other in the plane of the graphene layer. The graphene elements are placed on a dielectric substrate. We show that change in symmetry leads to a drastic change in the properties of the components. The physical principle of the devices is based on the dipole, quadrupole and hexapole resonances in the graphene disk which define stop-band, pass-band and stop-band frequency characteristics, respectively. A combination of stop-band and pass-band filter properties by shifing the electronic Fermi level allows one to design a switch. Numerical simulations show that the suggested components have very small dimensions, good characteristics and provide a dynamic control of their central frequency via electrostatic gating.
△ Less
Submitted 31 October, 2019;
originally announced November 2019.
-
Bright and Vivid Diffractive-Plasmonic Structural Colors
Authors:
Emerson G. Melo,
Ana L. A. Ribeiro,
Rodrigo S. Benevides,
Antonio A. G. V. Zuben,
Marcos V. P. Santos,
Alexandre A. Silva,
Gustavo S. Wiederhecker,
Thiago P. M. Alegre
Abstract:
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Cr…
▽ More
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Creating vivid color reflecting surfaces is still a major challenge and could revolutionize low power consumption image displays. Here we combine diffraction and plasmonic effects to design bright and vivid-color reflecting surfaces. The periodic reflection patterns are designed through genetic algorithm optimization and are defined in aluminum coated silicon chips.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
