-
Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity
Authors:
V. Chouhan,
D. Bice,
D. Burk,
S. Chandrasekaran,
A. Cravatta,
P. Dubiel,
G. V. Eremeev,
F. Furuta,
O. Melnychuk,
A. Netepenko,
M. K. Ng,
J. Ozelis,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param…
▽ More
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation
Authors:
K. McGee,
S. Kim,
K. Elliott,
A. Ganshyn,
W. Hartung,
P. Ostroumov,
A. Taylor,
T. Xu,
M. Martinello,
G. V. Eremeev,
A. Netepenko,
F. Furuta,
O. Melnychuk,
M. P. Kelly,
B. Guilfoyle,
T. Reid
Abstract:
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and fr…
▽ More
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and frequencies far from straightforward, and requires rigorous study. Upcoming high-Q0 continuous-wave linear accelerator projects, such as the proposed Michigan State University Facility for Rare Isotope Beam Energy Upgrade, and the underway Fermilab's Proton Improvement Plan-II, could benefit enormously from adapting these techniques to their beta_opt = 0.6 ~650 MHz 5-cell elliptical superconducting rf cavities, operating at an accelerating gradient of around ~17 MV/m. This is the first investigation of the adaptation of nitrogen do** and medium temperature furnace baking to prototype 644 MHz beta_opt = 0.65 cavities, with the aim of demonstrating the high-Q0 potential of these recipes in these novel cavities for future optimization as part of the FRIB400 project R&D. We find that nitrogen-do** delivers superior Q0, despite the sub-GHz operating frequency of these cavities, but is sensitive to the post-do** electropolishing removal step and experiences elevated residual resistance. Medium temperature furnace baking delivers reasonable performance with decreased residual resistance compared to the nitrogen doped cavity, but may require further recipe refinement. The gradient requirement for the FRIB400 upgrade project is comfortably achieved by both recipes.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
PI Loop Resonance Control for Dark Photon Experiment at 2 K Using a 2.6 GHz SRF Cavity
Authors:
C. Contreras-Martinez,
B. Giaccone,
O. Melnychuk,
A. Netepenko,
Y. Pischalnikov,
S. Posen,
V. Yakovlev
Abstract:
Two 2.6 GHz SRF cavities are being used for a dark photon search at the vertical test stand (VTS) in FNAL, for the second phase of the Dark SRF experiment. During testing at 2 K the cavities experience frequency detuning caused by microphonics and slow frequency drifts. The experiment requires that the two cavities have the same frequency within the cavity's bandwidth. These two cavities are equip…
▽ More
Two 2.6 GHz SRF cavities are being used for a dark photon search at the vertical test stand (VTS) in FNAL, for the second phase of the Dark SRF experiment. During testing at 2 K the cavities experience frequency detuning caused by microphonics and slow frequency drifts. The experiment requires that the two cavities have the same frequency within the cavity's bandwidth. These two cavities are equipped with frequency tuners consisting of three piezo actuators. The piezo actuators are used for fine-fast frequency tuning. A proportional-integral (PI) loop utilizing the three piezos on the emitter was used to stabilize the cavity frequency and match the receiver cavity frequency. The results from this implementation will be discussed. The integration time was also calculated via simulation.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Testing of the 2.6 GHz SRF Cavity Tuner for the Dark Photon Experiment at 2 K
Authors:
C. Contreras-Martinez,
B. Giaccone,
I. Gonin,
T. Khabiboulline,
O. Melnychuk,
Y. Pischalnikov,
S. Posen,
O. Pronitchev,
JC. Yun
Abstract:
At FNAL two single cell 2.6 GHz SRF cavities are being used to search for dark photons, the experiment can be conducted at 2 K or in a dilution refrigerator. Precise frequency tuning is required for these two cavities so they can be matched in frequency. A cooling capacity constraint on the dilution refrigerator only allows piezo actuators to be part of the design of the 2.6 GHz cavity tuner. The…
▽ More
At FNAL two single cell 2.6 GHz SRF cavities are being used to search for dark photons, the experiment can be conducted at 2 K or in a dilution refrigerator. Precise frequency tuning is required for these two cavities so they can be matched in frequency. A cooling capacity constraint on the dilution refrigerator only allows piezo actuators to be part of the design of the 2.6 GHz cavity tuner. The tuner is equipped with three encapsulated piezos that deliver long and short-range frequency tuning. Modifications were implemented on the first tuner design due to the low forces on the piezos caused by the cavity. Three brass rods with Belleville washers were added to the design to increase the overall force on the piezos. The testing results at 2 K are presented with the original design tuner and with the modification.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Flux Expulsion and Material Properties of Niobium Explored in 644-650 MHz Cavities
Authors:
K. McGee,
S-H. Kim,
P. Ostroumov,
G. Eremeev,
F. Furuta,
M. Martinello,
O. Melnychuk,
A. Netepenko
Abstract:
Upcoming projects requiring high-Q ~650 MHz medium-to-high-$β$ elliptical cavities drive a need to understand magnetic RF loss mechanisms and mitigations in greater detail. High-temperature annealing and fast-cooldowns have proven effective techniques for promoting magnetic flux expulsion in cavities, however the extent of their effectiveness has been observed to vary between niobium material lot…
▽ More
Upcoming projects requiring high-Q ~650 MHz medium-to-high-$β$ elliptical cavities drive a need to understand magnetic RF loss mechanisms and mitigations in greater detail. High-temperature annealing and fast-cooldowns have proven effective techniques for promoting magnetic flux expulsion in cavities, however the extent of their effectiveness has been observed to vary between niobium material lot and vendor. We explore the fast-cooldown method, and high-temperature annealing (900°C) in 644-650 MHz cavities fabricated from two different niobium vendors: Tokyo-Denkai, and Ningxia. which promote flux-expulsion efficiency. Using EBSD and PPMS methods, we aim to trace cavity flux expulsion efficiency to specific, measurable properties of the bulk niobium material, which, if identified, can lead to methods by which the flux expulsion properties of Nb material can be predicted prior to cavity fabrication, and can enable fine-tuning of cavity temperature treatments.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Phase-controlled improvement of photon lifetime in coupled superconducting cavities
Authors:
Changqing Wang,
Oleksandr S Melnychuk,
Crispin Contreras-Martinez,
Yao Lu,
Yuriy M Pischalnikov,
Oleg Pronitchev,
Bianca Giaccone,
Roman Pilipenko,
Silvia Zorzetti,
Sam Posen,
Alexander Romanenko,
Anna Grassellino
Abstract:
High-quality cavities are crucial for various fundamental physical studies and applications. Here we find that by coupling two cavities directly or via a phase-tunable coupling channel, the photon lifetime of the local field can exceed that of the bare cavities. The cavity photon lifetime is modified by the phases of the initial states and the phase accumulation on the coupling channel which affec…
▽ More
High-quality cavities are crucial for various fundamental physical studies and applications. Here we find that by coupling two cavities directly or via a phase-tunable coupling channel, the photon lifetime of the local field can exceed that of the bare cavities. The cavity photon lifetime is modified by the phases of the initial states and the phase accumulation on the coupling channel which affect the interference between cavities. In experiments, by coupling superconducting radio-frequency cavities via phase-tunable cables, we realize a factor of two improvement in the cavity photon lifetime. The results can bring rich revenue to quantum information science, sensing, and high-energy physics.
△ Less
Submitted 1 February, 2024; v1 submitted 24 May, 2023;
originally announced May 2023.
-
New Exclusion Limit for Dark Photons from an SRF Cavity-Based Search (Dark SRF)
Authors:
A. Romanenko,
R. Harnik,
A. Grassellino,
R. Pilipenko,
Y. Pischalnikov,
Z. Liu,
O. S. Melnychuk,
B. Giaccone,
O. Pronitchev,
T. Khabiboulline,
D. Frolov,
S. Posen,
A. Berlin,
A. Hook
Abstract:
We conduct the first ``light-shining-through-wall" (LSW) search for dark photons using two state-of-the-art high quality-factor superconducting radio frequency (SRF) cavities and report the results of its pathfinder run. Our new experimental setup enables improvements in sensitivity over previous searches and covers new dark photon parameter space. We design delicate calibration and measurement pr…
▽ More
We conduct the first ``light-shining-through-wall" (LSW) search for dark photons using two state-of-the-art high quality-factor superconducting radio frequency (SRF) cavities and report the results of its pathfinder run. Our new experimental setup enables improvements in sensitivity over previous searches and covers new dark photon parameter space. We design delicate calibration and measurement protocols to utilize the high-$Q$ setup at Dark SRF. Using cavities operating at $1.3 \ \text{GHz}$, we establish a new exclusion limit for kinetic mixing as small as {$ε= 1.6\times 10^{-9}$} and provide the world's best constraints on dark photons in the $2.1\times 10^{-7} \ \text{eV} - 5.7\times10^{-6} \ \text{eV}$ mass range. Our result is the first proof-of-concept for the enabling role of SRF cavities in LSW setups, with ample opportunities for further improvements. In addition, our data sets a competitive lab-based limit on the Standard Model photon mass by searching for longitudinal photon polarization.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Design of axion and axion dark matter searches based on ultra high Q SRF cavities
Authors:
Bianca Giaccone,
Asher Berlin,
Ivan Gonin,
Anna Grassellino,
Roni Harnik,
Yonatan Kahn,
Timergali Khabiboulline,
Andrei Lunin,
Oleksandr Melnychuk,
Alexander Netepenko,
Roman Pilipenko,
Yuriy Pischalnikov,
Sam Posen,
Oleg Pronitchev,
Alex Romanenko,
Vyacheslav Yakovlev
Abstract:
The Superconducting Quantum Materials and Systems center is develo** searches for dark photons, axions and ALPs with the goal of improving upon the current state-of-the-art sensitivity. These efforts leverage on Fermi National Accelerator expertise on ultra-high quality factor superconducting radio frequency cavities combined with the center research on quantum technology. Here we focus on multi…
▽ More
The Superconducting Quantum Materials and Systems center is develo** searches for dark photons, axions and ALPs with the goal of improving upon the current state-of-the-art sensitivity. These efforts leverage on Fermi National Accelerator expertise on ultra-high quality factor superconducting radio frequency cavities combined with the center research on quantum technology. Here we focus on multiple axion searches that utilize ~1E10 quality factor superconducting radio frequency cavities and their resonant modes to enhance the production and/or detection of axions in the cavity volume. In addition, we present preliminary results of single-mode and multi-mode nonlinearity measurements that were carried out as part of an experimental feasibility study to gain insight on the behavior of the ultra-high quality factor resonators and the experimental RF system in the regime relevant for axion searches.
△ Less
Submitted 22 July, 2022;
originally announced July 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Measurement of high quality factor superconducting cavities in tesla-scale magnetic fields for dark matter searches
Authors:
S. Posen,
M. Checchin,
O. S. Melnychuk,
T. Ring,
I. Gonin,
T. Khabiboulline
Abstract:
In dark matter searches using axion haloscopes, the search sensitivity depends on the quality factors ($Q_0$) of radiofrequency cavities immersed in multi-tesla magnetic fields. Increasing $Q_0$ would increase the scan rate through the parameter space of interest. Researchers develo** superconducting radiofrequency cavities for particle accelerators have developed methods for obtaining extremely…
▽ More
In dark matter searches using axion haloscopes, the search sensitivity depends on the quality factors ($Q_0$) of radiofrequency cavities immersed in multi-tesla magnetic fields. Increasing $Q_0$ would increase the scan rate through the parameter space of interest. Researchers develo** superconducting radiofrequency cavities for particle accelerators have developed methods for obtaining extremely high $Q_0\sim10^{11}$ in $μ$T-scale magnetic fields. In this paper, we describe efforts to develop high Q cavities made from Nb$_3$Sn films using a technique developed for particle accelerator cavities. Geometry optimization for this application is explored, and two cavities are tested: an existing particle accelerator-style cavity and a geometry developed and fabricated for use in high fields. A quality factor of ($5.3\pm0.3$)$\times 10^5$ is obtained at 3.9~GHz and 6~T at 4.2~K.
△ Less
Submitted 15 November, 2022; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Q-factor optimization for high-beta 650 MHz cavities for PIP-II
Authors:
M. Martinello,
D. J. Bice,
C. Boffo,
S. K. Chandrasekeran,
G. V. Eremeev,
F. Furuta,
A. Grassellino,
O. Melnychuk,
D. A. Sergatskov,
G. Wu,
T. C. Reid
Abstract:
High Q-factors are of utmost importance to minimize losses of superconducting radio-frequency cavities deployed in continuous wave particle accelerators. This study elucidates the surface treatment that can maximize the Q-factors in high-beta 650 MHz elliptical niobium cavities. State-of-the-art surface treatments are applied in many single-cell cavities, and surface resistance studies are perform…
▽ More
High Q-factors are of utmost importance to minimize losses of superconducting radio-frequency cavities deployed in continuous wave particle accelerators. This study elucidates the surface treatment that can maximize the Q-factors in high-beta 650 MHz elliptical niobium cavities. State-of-the-art surface treatments are applied in many single-cell cavities, and surface resistance studies are performed to understand the microwave dissipation at this unexplored frequency. The nitrogen do** treatment is confirmed to be necessary to maximize the Q-factors at medium RF fields. We applied this treatment in five-cell high-beta 650 MHz cavities and demonstrated that extremely high Q-factors were obtained at medium RF fields with this treatment. We also demonstrated that adding a cold electropolishing step after N-do** is crucial to push the quench field of multicell cavities to higher gradients.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Field emission mitigation studies in LCLS-II cavities via in situ plasma processing
Authors:
Bianca Giaccone,
Martina Martinello,
Paolo Berrutti,
Oleksandr Melnychuk,
Dmitri A. Sergatskov,
Anna Grassellino,
Dan Gonnella,
Marc Ross,
Marc Doleans,
John F. Zasadzinski
Abstract:
Field emission is one of the factors that can limit the performance of superconducting radio frequency cavities. In order to reduce possible field emission in LCLS-II (Linac Coherent Light Source II), we are develo** plasma processing for 1.3 GHz 9-cell cavities. Plasma processing can be applied in situ in the cryomodule to mitigate field emission related to hydrocarbon contamination present on…
▽ More
Field emission is one of the factors that can limit the performance of superconducting radio frequency cavities. In order to reduce possible field emission in LCLS-II (Linac Coherent Light Source II), we are develo** plasma processing for 1.3 GHz 9-cell cavities. Plasma processing can be applied in situ in the cryomodule to mitigate field emission related to hydrocarbon contamination present on the cavity surface. In this paper, plasma cleaning was applied to single cell and 9-cell cavities, both clean and contaminated; the cavities were cold tested before and after plasma processing in order to compare their performance. It was proved that plasma cleaning does not negatively affect the nitrogen do** surface treatment; on the contrary, it preserves the high quality factor and quench field. Plasma processing was also applied to cavities with natural field emission or artificially contaminated. It was found that this technique successfully removes carbon-based contamination from the cavity iris and that it is able to remove field emission in a naturally field emitting cavity. Vacuum failure experiments were simulated on four cavities, and in some cases plasma processing was able to achieve an increase in performance.
△ Less
Submitted 5 October, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Advances in Nb3Sn superconducting radiofrequency cavities towards first practical accelerator applications
Authors:
S. Posen,
J. Lee,
D. N. Seidman,
A. Romanenko,
B. Tennis,
O. S. Melnychuk,
D. A. Sergatskov
Abstract:
Nb3Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb3Sn cavities have been limited to cw accelerating fields <18 MV/m. In this paper, new results are presented with significantly higher fields, as high as 24 MV/m in single cell cavities. Results are also p…
▽ More
Nb3Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb3Sn cavities have been limited to cw accelerating fields <18 MV/m. In this paper, new results are presented with significantly higher fields, as high as 24 MV/m in single cell cavities. Results are also presented from the first ever Nb3Sn-coated 1.3 GHz 9-cell cavity, a full-scale demonstration on the cavity type used in production for the European XFEL and LCLS-II. Results are presented together with heat dissipation curves to emphasize the potential for industrial accelerator applications using cryocooler-based cooling systems. The cavities studied have an atypical shiny visual appearance, and microscopy studies of witness samples reveal significantly reduced surface roughness and smaller film thickness compared to typical Nb3Sn films for superconducting cavities. Possible mechanisms for increased maximum field are discussed as well as implications for physics of RF superconductivity in the low coherence length regime. Outlook for continued development is presented.
△ Less
Submitted 11 August, 2020; v1 submitted 2 August, 2020;
originally announced August 2020.
-
Ultra-Low Surface Resistance via Vacuum Heat Treatment of Superconducting Radiofrequency Cavities
Authors:
S. Posen,
A. Romanenko,
A. Grassellino,
O. S. Melnychuk,
D. A. Sergatskov
Abstract:
We report on an effort to improve the performance of superconducting radiofrequency cavities by the use of heat treatment in a temperature range sufficient to dissociate the natural surface oxide. We find that the residual resistance is significantly decreased, and we find an unexpected reduction in the BCS resistance. Together these result in extremely high quality factor values at relatively lar…
▽ More
We report on an effort to improve the performance of superconducting radiofrequency cavities by the use of heat treatment in a temperature range sufficient to dissociate the natural surface oxide. We find that the residual resistance is significantly decreased, and we find an unexpected reduction in the BCS resistance. Together these result in extremely high quality factor values at relatively large accelerating fields Eacc ~20 MV/m: Q0 of 3-4x10^11 at <1.5 K and Q0 ~5x10^10 at 2.0 K. In one cavity, measurements of surface resistance versus temperature showed an extremely small residual resistance of just 0.63+/-0.06 nOhms at 16 MV/m. SIMS measurements confirm that the oxide was significantly dissociated, but they also show the presence of nitrogen after heat treatment. We also present studies of surface oxidation via exposure to air and to water, as well as the effects of very light surface removal via HF rinse. The possibilities for applications and the planned future development are discussed.
△ Less
Submitted 29 June, 2019;
originally announced July 2019.
-
The Role of Magnetic Flux Expulsion to Reach Q0>3x10^10 in SRF Cryomodules
Authors:
S. Posen,
G. Wu,
E. Harms,
A. Grassellino,
O. S. Melnychuk,
D. A. Sergatskov,
N. Solyak,
A. Palczewski,
D. Gonnella,
T. Peterson
Abstract:
When a superconducting radiofrequency cavity is cooled through its critical temperature, ambient magnetic flux can become "frozen in" to the superconductor, resulting in degradation of the quality factor. This is especially problematic in applications where quality factor is a cost driver, such as in the CW linac for LCLS-II. Previously, it had been unknown how to prevent flux from being trapped d…
▽ More
When a superconducting radiofrequency cavity is cooled through its critical temperature, ambient magnetic flux can become "frozen in" to the superconductor, resulting in degradation of the quality factor. This is especially problematic in applications where quality factor is a cost driver, such as in the CW linac for LCLS-II. Previously, it had been unknown how to prevent flux from being trapped during cooldown in bulk niobium cavities, but recent R&D studies showed near-full flux expulsion can be achieved through high temperature heat treatment and cooling cavities through the superconducting transition with a spatial thermal gradient over the surface. In this paper, we describe the first accelerator implementation of these procedures, in cryomodules that are currently being produced for LCLS-II. We compare the performance of cavities under different conditions of heat treatment and thermal gradient during cooldown, showing a substantial improvement in performance when both are applied, enabling cryomodules to reach and, in many cases, exceed a Q0 of ~3x10^10.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake
Authors:
A. Grassellino,
A. Romanenko,
D. Bice,
O. Melnychuk,
A. C. Crawford,
S. Chandrasekaran,
Z. Sung,
D. A. Sergatskov,
M. Checchin,
S. Posen,
M. Martinello,
G. Wu
Abstract:
In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~4…
▽ More
In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~45 MV/m - reached very rarely- with most typical values being below 40 MV/m. These values are reached for niobium surfaces treated with electropolishing followed by the so called mild bake, a 120C vacuum bake (for 48 hours for fine grain and 24 hours for large grain surfaces). We discover that the addition during the mild bake of a step at 75C for few hours, before the 120C, increases systematically the quench fields up to unprecedented values of 49 MV/m. The significance of the result lays not only in the relative improvement, but in the proof that niobium surfaces can sustain and exceed CW radio frequency magnetic fields much larger than Hc1, pointing to an extrinsic nature of the current field limitations, and therefore to the potential to reach accelerating fields well beyond the current state of the art.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
The Effect of Mechanical Cold Work on the Magnetic Flux Expulsion of Niobium
Authors:
S. Posen,
S. K. Chandrasekaran,
A. C. Crawford,
A. Grassellino,
O. Melnychuk,
A. Romanenko,
D. Sergatskov,
Y. Trenikhina
Abstract:
Expulsion of ambient flux has been shown to be crucial to obtain high quality factors in bulk niobium SRF cavities. However, there remain many questions as to what properties of the niobium material determine its flux expulsion behavior. In this paper, we present first results from a new study of two cavities that were specially fabricated to study flux expulsion. Both cavities were made from larg…
▽ More
Expulsion of ambient flux has been shown to be crucial to obtain high quality factors in bulk niobium SRF cavities. However, there remain many questions as to what properties of the niobium material determine its flux expulsion behavior. In this paper, we present first results from a new study of two cavities that were specially fabricated to study flux expulsion. Both cavities were made from large grain ingot niobium slices, one of which had its slices rolled prior to fabrication, and none these slices were annealed prior to measurement. Expulsion measurements indicate that a dense network of grain boundaries is not necessary for a cavity to have near-complete flux trap** behavior up to large thermal gradients. The results also contribute to a body of evidence that cold work is a strong determinant of flux expulsion behavior in SRF-grade niobium.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Frequency dependence of trapped flux sensitivity in SRF cavities
Authors:
Mattia Checchin,
Martina Martinello,
Anna Grassellino,
Sebastian Aderhold,
Saravan K. Chandrasekaran,
Oleksandr Melnychuk,
Sam Posen,
Alexander Romanenko,
Dmitri A. Sergatskov
Abstract:
In this letter, we present the frequency dependence of the vortex surface resistance of bulk niobium accelerating cavities as a function of different state-of-the-art surface treatments. Higher flux surface resistance per amount of trapped magnetic field - sensitivity - is observed for higher frequencies, in agreement with our theoretical model. Higher sensitivity is observed for N-doped cavities,…
▽ More
In this letter, we present the frequency dependence of the vortex surface resistance of bulk niobium accelerating cavities as a function of different state-of-the-art surface treatments. Higher flux surface resistance per amount of trapped magnetic field - sensitivity - is observed for higher frequencies, in agreement with our theoretical model. Higher sensitivity is observed for N-doped cavities, which possess an intermediate value of electron mean-free-path, compared to 120 C and EP/BCP cavities. Experimental results from our study showed that the sensitivity has a non-monotonic trend as a function of the mean-free-path, including at frequencies other than 1.3 GHz, and that the vortex response to the rf field can be tuned from the pinning regime to flux-flow regime by manipulating the frequency and/or the mean-free-path of the resonator, as reported in our previous studies. The frequency dependence of the trapped flux sensitivity to the amplitude of the accelerating gradient is also highlighted.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Advancement in the understanding of the field and frequency dependent microwave surface resistance of niobium
Authors:
M. Martinello,
S. Aderhold,
S. K. Chandrasekaran,
M. Checchin,
A. Grassellino,
O. Melnychuk,
S. Posen,
A. Romanenko,
D. A. Sergatskov
Abstract:
The radio-frequency surface resistance of niobium resonators is incredibly reduced when nitrogen impurities are dissolved as interstitial in the material, conferring ultra-high Q-factors at medium values of accelerating field. This effect has been observed in both high and low temperature nitrogen treatments. As a matter of fact, the peculiar anti Q-slope observed in nitrogen doped cavities, i.e.…
▽ More
The radio-frequency surface resistance of niobium resonators is incredibly reduced when nitrogen impurities are dissolved as interstitial in the material, conferring ultra-high Q-factors at medium values of accelerating field. This effect has been observed in both high and low temperature nitrogen treatments. As a matter of fact, the peculiar anti Q-slope observed in nitrogen doped cavities, i.e. the decreasing of the Q-factor with the increasing of the radio-frequency field, come from the decreasing of the BCS surface resistance component as a function of the field. Such peculiar behavior has been considered consequence of the interstitial nitrogen present in the niobium lattice after the do** treatment. The study here presented show the field dependence of the BCS surface resistance of cavities with different resonant frequencies, such as: 650 MHz, 1.3 GHz, 2.6 GHz and 3.9 GHz, and processed with different state-of-the-art surface treatments. These findings show for the first time that the anti Q-slope might be seen at high frequency even for clean Niobium cavities, revealing useful suggestion on the physics underneath the anti Q-slope effect.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Unprecedented Quality Factors at Accelerating Gradients up to 45 MV/m in Niobium Superconducting Resonators via Low Temperature Nitrogen Infusion
Authors:
A. Grassellino,
A. Romanenko,
Y. Trenikhina,
M. Checchin,
M. Martinello,
O. S. Melnychuk,
S. Chandrasekaran,
D. A. Sergatskov,
S. Posen,
A. C. Crawford,
S. Aderhold,
D. Bice
Abstract:
We report the finding of new surface treatments that permit to manipulate the niobium resonator nitrogen content in the first few nanometers in a controlled way, and the resonator fundamental Mattis-Bardeen surface resistance and residual resistance accordingly. In particular, we find surface infusion conditions that systematically a) increase the quality factor of these 1.3 GHz superconducting ra…
▽ More
We report the finding of new surface treatments that permit to manipulate the niobium resonator nitrogen content in the first few nanometers in a controlled way, and the resonator fundamental Mattis-Bardeen surface resistance and residual resistance accordingly. In particular, we find surface infusion conditions that systematically a) increase the quality factor of these 1.3 GHz superconducting radio frequency (SRF) bulk niobium resonators, up to very high gradients; b) increase the achievable accelerating gradient of the cavity compared to its own baseline with state-of-the-art surface processing. Cavities subject to the new surface process have larger than two times the state of the art Q at 2K for accelerating fields > 35 MV/m. Moreover, very high accelerating gradients ~ 45 MV/m are repeatedly reached, which correspond to peak magnetic surface fields of 190 mT, among the highest measured for bulk niobium cavities. These findings open the opportunity to tailor the surface impurity content distribution to maximize performance in Q and gradients, and have therefore very important implications on future performance and cost of SRF based accelerators. They also help deepen the understanding of the physics of the RF niobium cavity surface.
△ Less
Submitted 21 January, 2017;
originally announced January 2017.
-
Quench-Induced Degradation of the Quality Factor in Superconducting Resonators
Authors:
M. Checchin,
M. Martinello,
A. Romanenko,
A. Grassellino,
D. A. Sergatskov,
S. Posen,
O. Melnychuk,
J. F. Zasadzinski
Abstract:
Quench of superconducting radio-frequency cavities frequently leads to the lowered quality factor Q0, which had been attributed to the additional trapped magnetic flux. Here we demonstrate that the origin of this magnetic flux is purely extrinsic to the cavity by showing no extra dissipation (unchanged Q0) after quenching in zero magnetic field, which allows us to rule out intrinsic mechanisms of…
▽ More
Quench of superconducting radio-frequency cavities frequently leads to the lowered quality factor Q0, which had been attributed to the additional trapped magnetic flux. Here we demonstrate that the origin of this magnetic flux is purely extrinsic to the cavity by showing no extra dissipation (unchanged Q0) after quenching in zero magnetic field, which allows us to rule out intrinsic mechanisms of flux trap** such as generation of thermal currents or trap** of the rf field. We also show the clear relation of dissipation introduced by quenching to the orientation of the applied magnetic field and the possibility to fully recover the quality factor by requenching in the compensated field. We discover that for larger values of the ambient field, the Q-factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during quench. Our findings are of special practical importance for accelerators based on low- and medium-beta accelerating structures residing close to focusing magnets, as well as for all high-Q cavity-based accelerators.
△ Less
Submitted 1 May, 2016;
originally announced May 2016.
-
Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications
Authors:
S. Posen,
A. Grassellino,
A. Romanenko,
O. Melnychuk,
D. A. Sergatskov,
M. Martinello,
M. Checchin,
A. C. Crawford
Abstract:
Even when cooled through its transition temperature in the presence of an external magnetic field, a superconductor can expel nearly all external magnetic flux. This Letter presents an experimental study to identify the parameters that most strongly influence flux trap** in high purity niobium during cooldown. This is critical to the operation of superconducting radiofrequency cavities, in which…
▽ More
Even when cooled through its transition temperature in the presence of an external magnetic field, a superconductor can expel nearly all external magnetic flux. This Letter presents an experimental study to identify the parameters that most strongly influence flux trap** in high purity niobium during cooldown. This is critical to the operation of superconducting radiofrequency cavities, in which trapped flux degrades the quality factor and therefore cryogenic efficiency. Flux expulsion was measured on a large survey of 1.3 GHz cavities prepared in various ways. It is shown that both spatial thermal gradient and high temperature treatment are critical to expelling external magnetic fields, while surface treatment has minimal effect. For the first time, it is shown that a cavity can be converted from poor expulsion behavior to strong expulsion behavior after furnace treatment, resulting in a substantial improvement in quality factor. Future plans are described to build on this result in order to optimize treatment for future cavities.
△ Less
Submitted 13 February, 2016; v1 submitted 14 September, 2015;
originally announced September 2015.
-
Magnetic Flux Dynamics in Horizontally Cooled Superconducting Cavities
Authors:
M. Martinello,
M. Checchin,
A. Grassellino,
A. C. Crawford,
O. Melnychuk,
A. Romanenko,
D. A. Sergatskov
Abstract:
Previous studies on magnetic flux expulsion as a function of cooling details have been performed for superconducting niobium cavities with the cavity beam axis placed parallel respect to the helium cooling flow, and findings showed that for sufficient cooling thermogradients all magnetic flux could be expelled and very low residual resistance could be achieved. In this paper we investigate the flu…
▽ More
Previous studies on magnetic flux expulsion as a function of cooling details have been performed for superconducting niobium cavities with the cavity beam axis placed parallel respect to the helium cooling flow, and findings showed that for sufficient cooling thermogradients all magnetic flux could be expelled and very low residual resistance could be achieved. In this paper we investigate the flux trap** and its impact on radio frequency surface resistance when the resonators are positioned perpendicularly to the helium cooling flow, which is representative of how superconducting radio-frequency (SRF) cavities are cooled in an accelerator. We also extend the studies to different directions of applied magnetic field surrounding the resonator. Results show that in the cavity horizontal configuration there is a different impact of the various field components on the final surface resistance, and that several parameters have to be considered to understand flux dynamics. A newly discovered phenomenon of concentration of flux lines at the cavity top leading to cavity equator temperature rise is presented.
△ Less
Submitted 17 April, 2015; v1 submitted 25 February, 2015;
originally announced February 2015.
-
Ultra-high quality factors in superconducting niobium cavities in ambient magnetic fields up to 190 mG
Authors:
A. Romanenko,
A. Grassellino,
A. C. Crawford,
D. A. Sergatskov,
O. Melnychuk
Abstract:
Ambient magnetic field, if trapped in the penetration depth, leads to the residual resistance and therefore sets the limit for the achievable quality factors in superconducting niobium resonators for particle accelerators. Here we show that a complete expulsion of the magnetic flux can be performed and leads to: 1) record quality factors $Q > 2\times10^{11}$ up to accelerating gradient of 22 MV/m;…
▽ More
Ambient magnetic field, if trapped in the penetration depth, leads to the residual resistance and therefore sets the limit for the achievable quality factors in superconducting niobium resonators for particle accelerators. Here we show that a complete expulsion of the magnetic flux can be performed and leads to: 1) record quality factors $Q > 2\times10^{11}$ up to accelerating gradient of 22 MV/m; 2) $Q\sim3\times10^{10}$ at 2 K and 16 MV/m in up to 190 mG magnetic fields. This is achieved by large thermal gradients at the normal/superconducting phase front during the cooldown. Our findings open up a way to ultra-high quality factors at low temperatures and show an alternative to the sophisticated magnetic shielding implemented in modern superconducting accelerators.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.
-
Dependence of the residual surface resistance of superconducting RF cavities on the cooling dynamics around $T_\mathrm{c}$
Authors:
A. Romanenko,
A. Grassellino,
O. Melnychuk,
D. A. Sergatskov
Abstract:
We report a strong effect of the cooling dynamics through $T_\mathrm{c}$ on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120$^\circ$C baking and nitrogen do**. Direct magnetic field measurements on the cavity walls show that t…
▽ More
We report a strong effect of the cooling dynamics through $T_\mathrm{c}$ on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120$^\circ$C baking and nitrogen do**. Direct magnetic field measurements on the cavity walls show that the effect stems from changes in the flux trap** efficiency: slow cooling leads to almost complete flux trap** and higher residual resistance while fast cooling leads to the much more efficient flux expulsion and lower residual resistance.
△ Less
Submitted 7 March, 2014; v1 submitted 30 January, 2014;
originally announced January 2014.
-
Nitrogen and argon do** of niobium for superconducting radio frequency cavities: a pathway to highly efficient accelerating structures
Authors:
A. Grassellino,
A. Romanenko,
O. Melnychuk,
Y. Trenikhina,
A. Crawford,
A. Rowe,
M. Wong,
D. Sergatskov,
T. Khabiboulline,
F. Barkov
Abstract:
We report a surface treatment that systematically improves the quality factor of niobium radio frequency cavities beyond the expected limit for niobium. A combination of annealing in a partial pressure of nitrogen or argon gas and subsequent electropolishing of the niobium cavity surface leads to unprecedented low values of the microwave surface resistance, and an improvement in the efficiency of…
▽ More
We report a surface treatment that systematically improves the quality factor of niobium radio frequency cavities beyond the expected limit for niobium. A combination of annealing in a partial pressure of nitrogen or argon gas and subsequent electropolishing of the niobium cavity surface leads to unprecedented low values of the microwave surface resistance, and an improvement in the efficiency of the accelerating structures up to a factor of 3, reducing the cryogenic load of superconducting cavities for both pulsed and continuous duty cycles. The field dependence of the surface resistance is reversed compared to standardly treated niobium.
△ Less
Submitted 24 June, 2013; v1 submitted 2 June, 2013;
originally announced June 2013.
-
Fermilab experience of post-annealing losses in SRF niobium cavities due to furnace contamination and the ways to its mitigation: a pathway to processing simplification and quality factor improvement
Authors:
A. Grassellino,
A. Romanenko,
A. Crawford,
O. Melnychuk,
A. Rowe,
M. Wong,
C. Cooper,
D. Sergatskov,
D. Bice,
Y. Trenikhina,
L. D. Cooley,
C. Ginsburg,
R. D. Kephart
Abstract:
We investigate the effect of high temperature treatments followed by only high-pressure water rinse (HPR) of superconducting radio frequency (SRF) niobium cavities. The objective is to provide a cost effective alternative to the typical cavity processing sequence, by eliminating the material removal step post furnace treatment while preserving or improving the RF performance. The studies have been…
▽ More
We investigate the effect of high temperature treatments followed by only high-pressure water rinse (HPR) of superconducting radio frequency (SRF) niobium cavities. The objective is to provide a cost effective alternative to the typical cavity processing sequence, by eliminating the material removal step post furnace treatment while preserving or improving the RF performance. The studies have been conducted in the temperature range 800-1000C for different conditions of the starting substrate: large grain and fine grain, electro-polished (EP) and centrifugal barrel polished (CBP) to mirror finish. An interesting effect of the grain size on the performances is found. Cavity results and samples characterization show that furnace contaminants cause poor cavity performance, and a practical solution is found to prevent surface contamination. Extraordinary values of residual resistances ~ 1 nOhm and below are then consistently achieved for the contamination-free cavities. These results lead to a more cost-effective processing and improved RF performance, and, in conjunction with CBP, open a potential pathway to acid-free processing.
△ Less
Submitted 16 May, 2013; v1 submitted 9 May, 2013;
originally announced May 2013.
-
High Gradient Tests of the Fermilab SSR1 Cavity
Authors:
T. Khabiboulline,
C. M. Ginsburg,
I. Gonin,
R. Madrak,
O. Melnychuk,
J. Ozelis,
Y. Pischalnikov,
L. Ristori,
A. Rowe,
D. A. Sergatskov,
A. Sukhanov,
I. Terechkine,
R. Wagner,
R. Webber,
V. Yakovlev
Abstract:
In Fermilab we are build and tested several superconducting Single Spoke Resonators (SSR1, β=0.22) which can be used for acceleration of low beta ions. Fist two cavities performed very well during cold test in Vertical Test Station at FNAL. One dressed cavity was also tested successfully in Horizontal Test Station. Currently we are building 8 cavity cryomodule for PIXIE project. Additional 10 cavi…
▽ More
In Fermilab we are build and tested several superconducting Single Spoke Resonators (SSR1, β=0.22) which can be used for acceleration of low beta ions. Fist two cavities performed very well during cold test in Vertical Test Station at FNAL. One dressed cavity was also tested successfully in Horizontal Test Station. Currently we are building 8 cavity cryomodule for PIXIE project. Additional 10 cavities were manufactured in the industry and on-going cold test results will be presented in this poster.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
