-
Hyperpixels: Pixel Filter Arrays of Multivariate Optical Elements for Optimized Spectral Imaging
Authors:
Calum Williams,
Richard Cousins,
Christopher J. Mellor,
Sarah E. Bohndiek,
George S. D. Gordon
Abstract:
We introduce the concept of `hyperpixels' in which each element of a pixel filter array (suitable for CMOS image sensor integration) has a spectral transmission tailored to a target spectral component expected in application-specific scenes. These are analogous to arrays of multivariate optical elements that could be used for sensing specific analytes. Spectral tailoring is achieved by engineering…
▽ More
We introduce the concept of `hyperpixels' in which each element of a pixel filter array (suitable for CMOS image sensor integration) has a spectral transmission tailored to a target spectral component expected in application-specific scenes. These are analogous to arrays of multivariate optical elements that could be used for sensing specific analytes. Spectral tailoring is achieved by engineering the heights of multiple sub-pixel Fabry-Perot resonators that cover each pixel area. We first present a design approach for hyperpixels, based on a matched filter concept and, as an exemplar, design a set of 4 hyperpixels tailored to optimally discriminate between 4 spectral reflectance targets. Next, we fabricate repeating 2x2 pixel filter arrays of these designs, alongside repeating 2x2 arrays of an optimal bandpass filters, perform both spectral and imaging characterization. Experimentally measured hyperpixel transmission spectra show a 2.4x reduction in unmixing matrix condition number (p=0.031) compared to the optimal band-pass set. Imaging experiments using the filter arrays with a monochrome sensor achieve a 3.47x reduction in unmixing matrix condition number (p=0.020) compared to the optimal band-pass set. This demonstrates the utility of the hyperpixel approach and shows its superiority even over the optimal bandpass case. We expect that with further improvements in design and fabrication processes increased performance may be obtained. Because the hyperpixels are straightforward to customize, fabricate and can be placed atop monochrome sensors, this approach is highly versatile and could be adapted to a wide range of real-time imaging applications which are limited by low SNR including micro-endoscopy, capsule endoscopy, industrial inspection and machine vision.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Single- and multi-layer micro-scale diffractive lens fabrication for fiber imaging probes with versatile depth-of-field
Authors:
Fei He,
Rafael Fuentes-Dominguez,
Richard Cousins,
Christopher J. Mellor,
Jennifer K. Barton,
George S. D. Gordon
Abstract:
Hair-thin optical fiber endoscopes have opened up new paradigms for advanced imaging applications in vivo. In certain applications, such as optical coherence tomography (OCT), light-sha** structures may be required on fiber facets to generate needle-like Bessel beams with large depth-of-field, while in others shorter depths of field with high lateral resolutions are preferable. In this paper, we…
▽ More
Hair-thin optical fiber endoscopes have opened up new paradigms for advanced imaging applications in vivo. In certain applications, such as optical coherence tomography (OCT), light-sha** structures may be required on fiber facets to generate needle-like Bessel beams with large depth-of-field, while in others shorter depths of field with high lateral resolutions are preferable. In this paper, we demonstrate a novel method to fabricate light-sha** structures on optical fibres, achieved via bonding encapsulated planar diffractive lenses onto fiber facets. Diffractive metallic structures have the advantages of being simple to design, fabricate and transfer, and our encapsulation approach is scalable to multi-layer stacks. As a demonstration, we design and transfer a Fresnel zone plate and a diffractive axicon onto fiber facets, and show that the latter device generates a needle-like Bessel beam with 350 mu m focal depth. We also evaluate the imaging performance of both devices and show that the axicon fiber is able to maintain focussed images of a USAF resolution target over a 150 mu m distance. Finally, we fabricate a two-layer stack of Fresnel zone plates on a fiber and characterise the modified beam profile and demonstrate good imaging performance. We anticipate our fabrication approach could enable multi-functional complex optical structures (e.g. using plasmonics, polarization control) to be integrated onto fibers for ultra-thin advanced imaging and sensing.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Identifying Carbon as the Source of Visible Single Photon Emission from Hexagonal Boron Nitride
Authors:
Noah Mendelson,
Dipankar Chugh,
Jeffrey R. Reimers,
Tin S. Cheng,
Andreas Gottscholl,
Hu Long,
Christopher J. Mellor,
Alex Zettl,
Vladimir Dyakonov,
Peter H. Beton,
Sergei V. Novikov,
Chennupati Jagadish,
Hark Hoe Tan,
Michael J. Ford,
Milos Toth,
Carlo Bradac,
Igor Aharonovich
Abstract:
Single photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered significant attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN and by…
▽ More
Single photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered significant attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN and by comparing various synthesis methods, we provide direct evidence that the visible SPEs are carbon related. Room temperature optically detected magnetic resonance (ODMR) is demonstrated on ensembles of these defects. We also perform ion implantation experiments and confirm that only carbon implantation creates SPEs in the visible spectral range. Computational analysis of hundreds of potential carbon-based defect transitions suggest that the emission results from the negatively charged VBCN- defect, which experiences long-range out-of-plane deformations and is environmentally sensitive. Our results resolve a long-standing debate about the origin of single emitters at the visible range in hBN and will be key to deterministic engineering of these defects for quantum photonic devices.
△ Less
Submitted 20 April, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Low-temperature and high magnetic field dynamic scanning capacitance microscope
Authors:
A. Baumgartner,
M. E. Suddards,
C. J. Mellor
Abstract:
We demonstrate a dynamic scanning capacitance microscope (DSCM) that operates at large bandwidths, cryogenic temperatures and high magnetic fields. The setup is based on a non-contact atomic force microscope (AFM) with a quartz tuning fork sensor with non-optical excitation and read-out for topography, force and dissipation measurements. The metallic AFM tip forms part of an rf resonator with a…
▽ More
We demonstrate a dynamic scanning capacitance microscope (DSCM) that operates at large bandwidths, cryogenic temperatures and high magnetic fields. The setup is based on a non-contact atomic force microscope (AFM) with a quartz tuning fork sensor with non-optical excitation and read-out for topography, force and dissipation measurements. The metallic AFM tip forms part of an rf resonator with a transmission characteristics modulated by the sample properties and the tip-sample capacitance. The tip motion gives rise to a modulation of the capacitance at the frequency of the AFM sensor and its harmonics, which can be recorded simultaneously with the AFM data. We use an intuitive model to describe and analyze the resonator transmission and show that for most experimental conditions it is proportional to the complex tip-sample conductance, which depends on both the tip-sample capacitance and the sample resistivity. We demonstrate the performance of the DSCM on metal disks buried under a polymer layer and we discuss images recorded on a two-dimensional electron gas in the quantum Hall effect regime, i.e. at cryogenic temperatures and high magnetic fields, where we directly image the formation of compressible stripes at the physical edge of the sample.
△ Less
Submitted 22 December, 2008;
originally announced December 2008.
