Showing 1–20 of 20 results for author: Melloni, A

Self-Adaptive Integrated Photonic Receiver for Turbulence Compensation in Free Space Optical Links

Authors: Andres Ivan Martinez, Gabriele Cavicchioli, Seyedmohammad Seyedinnavadeh, Francesco Zanetto, Marco Sampietro, Alessandro DAcierno, Francesco Morichetti, Andrea Melloni

Abstract: In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real… ▽ More In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real time for scintillation in FSO links. The optical front-end of the receiver is entirely integrated in a silicon photonic chip hosting a 2D Optical Antenna Array and a self-adaptive analog Programmable Optical Processor made of a mesh of tunable Mach-Zehnder interferometers. The photonic chip acts as an adaptive interface to couple turbulent FSO beams to single-mode guided optics, enabling energy and cost-effective operation, scalability to systems with a larger number of apertures, modulation-format and data-protocol transparency, and pluggability with commercial fiber optics transceivers. Experimental results demonstrate the effectiveness of the proposed receiver with optical signals at a data rate of 10 Gbit/s transmitted in indoor FSO links where different turbulent conditions, even stronger than those expected in outdoor links of hundreds of meters, are reproduced. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Scalable Low-latency Optical Phase Sensor Array

Authors: Zhanghao Sun, Sunil Pai, Carson Valdez, Maziyar Milanizadeh, Andrea Melloni, Francesco Morichetti, David A. B. Miller, Olav Solgaard

Abstract: Optical phase measurement is critical for many applications and traditional approaches often suffer from mechanical instability, temporal latency, and computational complexity. In this paper, we describe compact phase sensor arrays based on integrated photonics, which enable accurate and scalable reference-free phase sensing in a few measurement steps. This is achieved by connecting multiple two-p… ▽ More Optical phase measurement is critical for many applications and traditional approaches often suffer from mechanical instability, temporal latency, and computational complexity. In this paper, we describe compact phase sensor arrays based on integrated photonics, which enable accurate and scalable reference-free phase sensing in a few measurement steps. This is achieved by connecting multiple two-port phase sensors into a graph to measure relative phases between neighboring and distant spatial locations. We propose an efficient post-processing algorithm, as well as circuit design rules to reduce random and biased error accumulations. We demonstrate the effectiveness of our system in both simulations and experiments with photonic integrated circuits. The proposed system measures the optical phase directly without the need for external references or spatial light modulators, thus providing significant benefits for applications including microscope imaging and optical phased arrays. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Brillouin and Kerr nonlinearities of a low-index silicon oxynitride platform

Authors: Kaixuan Ye, Yvan Klaver, Oscar A Jimenez Gordillo, Roel Botter, Okky Daulay, Francesco Morichetti, Andrea Melloni, David Marpaung

Abstract: Nonlinear optical effects including stimulated Brillouin scattering (SBS) and four-wave mixing (FWM) play an important role in microwave photonics, optical frequency combs, and quantum photonics. Harnessing SBS and FWM in a low-loss and versatile integrated platform would open the path to building large-scale Brillouin/Kerr-based photonic integrated circuits. In this letter, we investigate the Bri… ▽ More Nonlinear optical effects including stimulated Brillouin scattering (SBS) and four-wave mixing (FWM) play an important role in microwave photonics, optical frequency combs, and quantum photonics. Harnessing SBS and FWM in a low-loss and versatile integrated platform would open the path to building large-scale Brillouin/Kerr-based photonic integrated circuits. In this letter, we investigate the Brillouin and Kerr properties of a low-index (n=1.513 @ 1550 nm) silicon oxynitride (SiON) platform. We observed, for the first time, backward SBS in SiON waveguides with a Brillouin gain coefficient of 0.3$\rm m^{-1}W^{-1}$, which can potentially be increased to 0.95$\rm m^{-1}W^{-1}$ by just tailoring the waveguide cross-section. We also performed FWM experiments in SiON rings and obtained the nonlinear parameter $γ$, of 0.02 $\rm m^{-1}W^{-1}$. Our results point to a low-loss and low-index photonic integrated platform that is both Brillouin and Kerr active. △ Less

Submitted 31 January, 2023; originally announced January 2023.

Experimental evaluation of digitally-verifiable photonic computing for blockchain and cryptocurrency

Authors: Sunil Pai, Taewon Park, Marshall Ball, Bogdan Penkovsky, Maziyar Milanizadeh, Michael Dubrovsky, Nathnael Abebe, Francesco Morichetti, Andrea Melloni, Shanhui Fan, Olav Solgaard, David A. B. Miller

Abstract: As blockchain technology and cryptocurrency become increasingly mainstream, ever-increasing energy costs required to maintain the computational power running these decentralized platforms create a market for more energy-efficient hardware. Photonic cryptographic hash functions, which use photonic integrated circuits to accelerate computation, promise energy efficiency for verifying transactions an… ▽ More As blockchain technology and cryptocurrency become increasingly mainstream, ever-increasing energy costs required to maintain the computational power running these decentralized platforms create a market for more energy-efficient hardware. Photonic cryptographic hash functions, which use photonic integrated circuits to accelerate computation, promise energy efficiency for verifying transactions and mining in a cryptonetwork. Like many analog computing approaches, however, current proposals for photonic cryptographic hash functions that promise similar security guarantees as Bitcoin are susceptible to systematic error, so multiple devices may not reach a consensus on computation despite high numerical precision (associated with low photodetector noise). In this paper, we theoretically and experimentally demonstrate that a more general family of robust discrete analog cryptographic hash functions, which we introduce as LightHash, leverages integer matrix-vector operations on photonic mesh networks of interferometers. The difficulty of LightHash can be adjusted to be sufficiently tolerant to systematic error (calibration error, loss error, coupling error, and phase error) and preserve inherent security guarantees present in the Bitcoin protocol. Finally, going beyond our proof-of-concept, we define a ``photonic advantage'' criterion and justify how recent developments in CMOS optoelectronics (including analog-digital conversion) provably achieve such advantage for robust and digitally-verifiable photonic computing and ultimately generate a new market for decentralized photonic technology. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Comments: 17 pages, 7 figures

Experimentally realized in situ backpropagation for deep learning in nanophotonic neural networks

Authors: Sunil Pai, Zhanghao Sun, Tyler W. Hughes, Taewon Park, Ben Bartlett, Ian A. D. Williamson, Momchil Minkov, Maziyar Milanizadeh, Nathnael Abebe, Francesco Morichetti, Andrea Melloni, Shanhui Fan, Olav Solgaard, David A. B. Miller

Abstract: Neural networks are widely deployed models across many scientific disciplines and commercial endeavors ranging from edge computing and sensing to large-scale signal processing in data centers. The most efficient and well-entrenched method to train such networks is backpropagation, or reverse-mode automatic differentiation. To counter an exponentially increasing energy budget in the artificial inte… ▽ More Neural networks are widely deployed models across many scientific disciplines and commercial endeavors ranging from edge computing and sensing to large-scale signal processing in data centers. The most efficient and well-entrenched method to train such networks is backpropagation, or reverse-mode automatic differentiation. To counter an exponentially increasing energy budget in the artificial intelligence sector, there has been recent interest in analog implementations of neural networks, specifically nanophotonic neural networks for which no analog backpropagation demonstration exists. We design mass-manufacturable silicon photonic neural networks that alternately cascade our custom designed "photonic mesh" accelerator with digitally implemented nonlinearities. These reconfigurable photonic meshes program computationally intensive arbitrary matrix multiplication by setting physical voltages that tune the interference of optically encoded input data propagating through integrated Mach-Zehnder interferometer networks. Here, using our packaged photonic chip, we demonstrate in situ backpropagation for the first time to solve classification tasks and evaluate a new protocol to keep the entire gradient measurement and update of physical device voltages in the analog domain, improving on past theoretical proposals. Our method is made possible by introducing three changes to typical photonic meshes: (1) measurements at optical "grating tap" monitors, (2) bidirectional optical signal propagation automated by fiber switch, and (3) universal generation and readout of optical amplitude and phase. After training, our classification achieves accuracies similar to digital equivalents even in presence of systematic error. Our findings suggest a new training paradigm for photonics-accelerated artificial intelligence based entirely on a physical analog of the popular backpropagation technique. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Comments: 23 pages, 10 figures

Spatially resolving amplitude and phase of light with a reconfigurable photonic integrated circuit

Authors: Johannes Bütow, Jörg S. Eismann, Maziyar Milanizadeh, Francesco Morichetti, Andrea Melloni, David A. B. Miller, Peter Banzer

Abstract: Photonic integrated circuits (PICs) play a pivotal role in many applications. Particularly powerful are circuits based on meshes of reconfigurable Mach-Zehnder interferometers as they enable active processing of light. Various possibilities exist to get light into such circuits. Sampling an electromagnetic field distribution with a carefully designed free-space interface is one of them. Here, a re… ▽ More Photonic integrated circuits (PICs) play a pivotal role in many applications. Particularly powerful are circuits based on meshes of reconfigurable Mach-Zehnder interferometers as they enable active processing of light. Various possibilities exist to get light into such circuits. Sampling an electromagnetic field distribution with a carefully designed free-space interface is one of them. Here, a reconfigurable PIC is used to optically sample and process free-space beams so as to implement a spatially resolving detector of amplitudes and phases. In order to perform measurements of this kind we develop and experimentally implement a versatile method for the calibration and operation of such integrated photonics based detectors. Our technique works in a wide parameter range, even when running the chip off the design wavelength. Amplitude, phase and polarization sensitive measurements are of enormous importance in modern science and technology, providing a vast range of applications for such detectors. △ Less

Submitted 20 April, 2022; originally announced April 2022.

Journal ref: Optica 9, 939-946 (2022)

Amorphous-silicon visible-light detector integrated in silicon nitride waveguides

Authors: Christian De Vita, Fabio Toso, Natale Giovanni Pruiti, Charalambos Klitis, Giorgio Ferrari, Marc Sorel, Andrea Melloni, Francesco Morichetti

Abstract: Visible light integrated photonics is emerging as a promising technology for the realization of optical devices for applications in sensing, quantum information and communications, imaging and displays. Among the existing photonic platforms, high-index contrast silicon nitride ($Si_{3}N_{4}$) waveguides offer broadband transparency in the visible spectral range and a high scale of integration. As… ▽ More Visible light integrated photonics is emerging as a promising technology for the realization of optical devices for applications in sensing, quantum information and communications, imaging and displays. Among the existing photonic platforms, high-index contrast silicon nitride ($Si_{3}N_{4}$) waveguides offer broadband transparency in the visible spectral range and a high scale of integration. As far as the complexity of photonic integrated circuits (PICs) increases, on-chip detectors are required to monitor their working point for reconfiguration and stabilization operations. In this work we present a compact in-line power monitor integrated in $Si_{3}N_{4}$ waveguides that operates in the red-light wavelength range (660 nm). The proposed device exploits the photoconductivity of a hydrogenated amorphous silicon (a-Si:H) film employed as a coating layer of the optical waveguide. Experimental results show a responsivity of 30 mA/W, a sensitivity of -45 dBm and a sub-$μ$s time response. These features enable the use of the proposed photoconductor for high-sensitivity monitoring and control of visible-light $Si_{3}N_{4}$ PICs. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Multibeam Free Space Optics Receiver Enabled by a Programmable Photonic Mesh

Authors: Maziyar Milanizadeh, SeyedMohammad SeyedinNavadeh, Francesco Zanetto, Vittorio Grimaldi, Christian De Vita, Charalambos Klitis, Marc Sorel, Giorgio Ferrari, David A. B. Miller, Andrea Melloni, Francesco Morichetti

Abstract: Free-space optics (FSO) is an attractive technology to meet the ever-growing demand for wireless bandwidth in next generation networks. To increase the spectral efficiency of FSO links, transmission over spatial division multiplexing (SDM) can be exploited, where orthogonal light beams have to be shaped according to suitable amplitude, phase, and polarization profiles. In this work, we show that a… ▽ More Free-space optics (FSO) is an attractive technology to meet the ever-growing demand for wireless bandwidth in next generation networks. To increase the spectral efficiency of FSO links, transmission over spatial division multiplexing (SDM) can be exploited, where orthogonal light beams have to be shaped according to suitable amplitude, phase, and polarization profiles. In this work, we show that a programmable photonic circuits, consisting of a silicon photonic mesh of tunable Mach-Zehnder Interferometers (MZIs) can be used as an adaptive multibeam receiver for a FSO communication link. The circuit can self-configure to simultaneously receive and separate, with negligible mutual crosstalk, signals carried by orthogonal FSO beams sharing the same wavelength and polarization. This feature is demonstrated on signal pairs either arriving at the receiver from orthogonal directions (direction-diversity) or being shaped according to different orthogonal spatial modes (mode-diversity), even in the presence of some mixing during propagation. The performance of programmable mesh as an adaptive multibeam receiver is assessed by means of data channel transmission at 10 Gbit/s a wavelength of 1550 nm, but the optical bandwidth of the receiver (>40 nm) allows its use at much higher data rates as well as in wavelength-division multiplexing SDM communication links. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Automated manipulation of free space optical beams with integrated silicon photonic meshes

Authors: Maziyar Milanizadeh, Fabio Toso, Giorgio Ferrari, Tigers Jonuzi, David A. B. Miller, Andrea Melloni, Francesco Morichetti

Abstract: Free-space optics (FSO) offer promising solutions in wireless systems where many different devices need to communicate and interoperate, exchanging massive amounts of data as in communication and sensor networks, and in technologies for positioning and ranging. In these applications, control and manipulation of the light field is required for properly generating and correctly receiving FSO beams e… ▽ More Free-space optics (FSO) offer promising solutions in wireless systems where many different devices need to communicate and interoperate, exchanging massive amounts of data as in communication and sensor networks, and in technologies for positioning and ranging. In these applications, control and manipulation of the light field is required for properly generating and correctly receiving FSO beams even in the presence of unpredictable objects and turbulence in the light path. In this work, we use a programmable mesh of Mach-Zehnder Interferometers (MZIs) to automatically control the complex field radiated and captured by an array of optical antennas. Several functionalities are demonstrated, including the generation of perfectly shaped beams with non-perfect optical antennas, the imaging of a desired field pattern through an obstacle or a diffusive medium, and the identification of an unknown obstacle inserted in the FSO path. Compared to conventional devices used for the manipulation of FSO beams, such as spatial light modulators (SLMs), our programmable circuit can self-configure through automated control strategies and can be integrated with other functionalities implemented onto the same photonic chip. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Characterization of photon pairs generated by a silicon ring resonator under electrical self-pum**

Authors: Francesco Garrisi, Federico Andrea Sabattoli, Nicola Bergamasco, Micol Previde Massara, Federico Pirzio, Francesco Morichetti, Andrea Melloni, Marco Liscidini, Matteo Galli, Daniele Bajoni

Abstract: We report on the generation of nonclassical states of light in a silicon ring resonator in a selfpum** scheme. The ring is inserted in a lasing cavity, for which it acts as a filter, so that the lasing always occurs within a selected ring resonance, without active stabilization of the resonance frequency. We show the emission of coincident photon pairs and study their correlation properties thro… ▽ More We report on the generation of nonclassical states of light in a silicon ring resonator in a selfpum** scheme. The ring is inserted in a lasing cavity, for which it acts as a filter, so that the lasing always occurs within a selected ring resonance, without active stabilization of the resonance frequency. We show the emission of coincident photon pairs and study their correlation properties through the reconstruction of the measurements via stimulated emission. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Fundamental limits on the losses of phase and amplitude optical actuators

Authors: Simone Zanotto, Francesco Morichetti, Andrea Melloni

Abstract: Amplitude and phase are the basic properties of every wave phenomena; as long as optical waves are concerned, the ability to act on these variables is at the root of a wealth of switching devices. To quantify the performance of an optical switching device, an essential aspect is to determine the tradeoff between the insertion loss and the amplitude or phase modulation depth. Here it is shown that… ▽ More Amplitude and phase are the basic properties of every wave phenomena; as long as optical waves are concerned, the ability to act on these variables is at the root of a wealth of switching devices. To quantify the performance of an optical switching device, an essential aspect is to determine the tradeoff between the insertion loss and the amplitude or phase modulation depth. Here it is shown that every switching optical device is subject to such a tradeoff, intrinsically connected to the dielectric response of the materials employed inside the switching element itself. This limit finds its roots in fundamental physics, as it directly derives from Maxwell's equations for linear dielectrics, and is hence applicable to a wide class of optical components. Furthermore it results that concepts as filtering, resonance and critical coupling could be of advantage in approaching the limit. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Journal ref: Published in Laser Photonics Rev. 9, No. 6, 666 (2015)

Metasurface reconfiguration through lithium ion intercalation in a transition metal oxide

Authors: Simone Zanotto, Alessandra Blancato, Annika Buchheit, Marina Muñoz-Castro, Hans-Dieter Wiemhöfer, Francesco Morichetti, Andrea Melloni

Abstract: In the latest years the optical engineer's toolbox has welcomed a new concept, the metasurface. In a metasurface, properly tailored material inclusions are able to reshape the electromagnetic field of an incident beam. Change of amplitude, phase and polarization can be addressed within a thickness of only a fraction of a wavelength. By means of this concept, a radical gain in compactness of optica… ▽ More In the latest years the optical engineer's toolbox has welcomed a new concept, the metasurface. In a metasurface, properly tailored material inclusions are able to reshape the electromagnetic field of an incident beam. Change of amplitude, phase and polarization can be addressed within a thickness of only a fraction of a wavelength. By means of this concept, a radical gain in compactness of optical components is foreseen, even of the most complex ones; other unique features like that of analog computing have also been identified. With this huge potential ready to be disclosed, lack of tunability is still a main barrier to be broken. Metasurfaces must now be made reconfigurable, i.e. able to modify and memorize their state, possibly with a small amount of energy. In this Communication we report low-energy, self-holding metasurface reconfiguration through lithium intercalation in a vanadium pentoxide layer integrated within the photonic device. By a proper meta-atom design, operation on amplitude and phase of linearly polarized light has been demonstrated. In addition, manipulation of circularly polarized light in the form of tunable chirality and tunable handedness-preserving reflection has been implemented. These operations are accomplished using as low as 50 pJ/μm^{2}, raising lithium intercalation in transition metal oxides as one of the most energy efficient self-holding tuning mechanisms known so far for metasurfaces, with significant perspectives in the whole field of nanophotonics. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Journal ref: Article published on Advanced Optical Materials, 2017, 5, 1600732

Reconfigurable photonic integrated mode (de)multiplexer for SDM fiber transmission

Authors: Daniele Melati, Andrea Alippi, Andrea Melloni

Abstract: A photonic integrated circuit for mode multiplexing and demultiplexing in a few-mode fiber is presented and demonstrated. Two 10 Gbit/s channels at the same wavelength and polarization are simultaneously transmitted over modes LP01 and LP11a of a few-mode fiber exploiting the integrated mode MUX and DEMUX. The proposed Indium-Phosphide-based circuits have a good coupling efficiency with fiber mode… ▽ More A photonic integrated circuit for mode multiplexing and demultiplexing in a few-mode fiber is presented and demonstrated. Two 10 Gbit/s channels at the same wavelength and polarization are simultaneously transmitted over modes LP01 and LP11a of a few-mode fiber exploiting the integrated mode MUX and DEMUX. The proposed Indium-Phosphide-based circuits have a good coupling efficiency with fiber modes with mode-dependant loss smaller than 1 dB. Measured mode excitation cross-talk is as low as -20 dB and a channel cross-talk after propagation and demultiplexing of -15 dB is achieved. An operational bandwidth of the full transmission system of at least 10 nm is demonstrated. Both mode MUX and DEMUX are fully reconfigurable and allow a dynamic switch of channel routing in the transmission system. △ Less

Submitted 1 March, 2016; v1 submitted 26 February, 2016; originally announced February 2016.

All-optical mode unscrambling on a silicon photonic chip

Authors: Andrea Annoni, Emanuele Guglielmi, Marco Carminati, Giorgio Ferrari, Marco Sampietro, David A. B. Miller, Andrea Melloni, Francesco Morichetti

Abstract: Propagation of light beams through scattering or multimode systems may lead to randomization of the spatial coherence of the light. Although information is not lost, its recovery requires a coherent interferometric reconstruction of the original signals, which have been scrambled into the modes of the scattering system. Here, we show that we can automatically unscramble four optical beams that hav… ▽ More Propagation of light beams through scattering or multimode systems may lead to randomization of the spatial coherence of the light. Although information is not lost, its recovery requires a coherent interferometric reconstruction of the original signals, which have been scrambled into the modes of the scattering system. Here, we show that we can automatically unscramble four optical beams that have been arbitrarily mixed in a multimode waveguide, undoing the scattering and mixing between the spatial modes through a mesh of silicon photonics Mach-Zehnder interferometers. Using embedded transparent detectors and a progressive tuning algorithm, the mesh self-configures automatically and reset itself after significantly perturbing the mixing, without turning off the beams. We demonstrate the recovery of four separate 10 Gbits/s information channels, with residual cross-talk between beams of -20dB. This principle of self-configuring and self-resetting in optical systems should be applicable in a wide range of optical applications. △ Less

Submitted 10 January, 2017; v1 submitted 18 December, 2015; originally announced December 2015.

Comments: 23 pages, 10 figures

Journal ref: Light: Science & Applications (2017) 6, e17110

Design of a hybrid silicon-plasmonic co-propagant integrated coherent perfect absorber

Authors: Simone Zanotto, Andrea Melloni

Abstract: By a hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that coherent perfect absorption can be achieved in a co-propagant coupler geometry. The device holds promises for classical and quantum signal processing. First, the operating principle of the proposed device is detailed in the context of a more general 2x2 lossy coupler formalism. Then, it is shown how to tune th… ▽ More By a hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that coherent perfect absorption can be achieved in a co-propagant coupler geometry. The device holds promises for classical and quantum signal processing. First, the operating principle of the proposed device is detailed in the context of a more general 2x2 lossy coupler formalism. Then, it is shown how to tune the device in a wide region of possible working points, its broadband operation, and the tolerance to fabrication uncertainties. Finally, a complete picture of the electromagnetic modes inside the hybrid structure is analyzed, shining light onto the potentials which the proposed device holds in view of other applications like nonlinear optics, polarization control, and sensing. △ Less

Submitted 16 December, 2015; originally announced December 2015.

ContactLess Integrated Photonic Probe for light monitoring in InP-based devices

Authors: Daniele Melati, Marco Carminati, Stefano Grillanda, Giorgio Ferrari, Francesco Morichetti, Marco Sampietro, Andrea Melloni

Abstract: The increasing complexity of photonic integrated circuits requires the possibility to monitor the state of the circuit in order to stabilize the working point against environmental fluctuations or to perform reliable reconfiguration procedures. Although InP technologies can naturally integrate high-quality photodiodes, their use as tap monitors necessarily affects the circuit response and is restr… ▽ More The increasing complexity of photonic integrated circuits requires the possibility to monitor the state of the circuit in order to stabilize the working point against environmental fluctuations or to perform reliable reconfiguration procedures. Although InP technologies can naturally integrate high-quality photodiodes, their use as tap monitors necessarily affects the circuit response and is restricted to few units per chip. They are hence unsuited for very large circuits, where transparent power monitors become key components. In this paper we present the implementation of a ContactLess Integrated Photonic Probe (CLIPP) realizing a non invasive integrated light monitor on InP-based devices. We describe an innovative vertical scheme of the CLIPP monitor which exploits the back side of the chip as a common electrode, thus enabling a reduction of the device footprint and a simplification of the electrical connectivity. We characterize the response of the CLIPP and demonstrate its functionality as power monitor. Lastly, we provide a direct demonstration that CLIPP monitor allows to access more accurate information on the working point of photonic integrated circuits compared to conventional external or integrated photodetectors. △ Less

Submitted 18 December, 2014; originally announced December 2014.

Non-invasive monitoring and control in silicon photonics by CMOS integrated electronics

Authors: Stefano Grillanda, Marco Carminati, Francesco Morichetti, Pietro Ciccarella, Andrea Annoni, Giorgio Ferrari, Michael Strain, Marc Sorel, Marco Sampietro, Andrea Melloni

Abstract: As photonics breaks away from today's device level toward large scale of integration and complex systems-on-a-chip, concepts like monitoring, control and stabilization of photonic integrated circuits emerge as new paradigms. Here, we show non-invasive monitoring and feedback control of high quality factor silicon photonics resonators assisted by a transparent light detector directly integrated ins… ▽ More As photonics breaks away from today's device level toward large scale of integration and complex systems-on-a-chip, concepts like monitoring, control and stabilization of photonic integrated circuits emerge as new paradigms. Here, we show non-invasive monitoring and feedback control of high quality factor silicon photonics resonators assisted by a transparent light detector directly integrated inside the cavity. Control operations are entirely managed by a CMOS microelectronic circuit, hosting many parallel electronic read-out channels, that is bridged to the silicon photonics chip. Advanced functionalities, such as wavelength tuning, locking, labeling and swap** are demonstrated. The non-invasive nature of the transparent monitor and the scalability of the CMOS read-out system offer a viable solution for the control of arbitrarily reconfigurable photonic integrated circuits aggregating many components on a single chip. △ Less

Submitted 22 May, 2014; originally announced May 2014.

Non-invasive light observer

Authors: Francesco Morichetti, Stefano Grillanda, Marco Carminati, Giorgio Ferrari, Marco Sampietro, Michael Strain, Marc Sorel, Andrea Melloni

Abstract: Photonic technologies lack non-invasive monitoring tools to inspect the light inside optical waveguides. This is one of the main barriers to large scale of integration, even though photonic platforms are potentially ready to host several thousands of elements on a single chip. Here, we demonstrate non-invasive light observation in silicon photonics devices by exploiting photon interaction with int… ▽ More Photonic technologies lack non-invasive monitoring tools to inspect the light inside optical waveguides. This is one of the main barriers to large scale of integration, even though photonic platforms are potentially ready to host several thousands of elements on a single chip. Here, we demonstrate non-invasive light observation in silicon photonics devices by exploiting photon interaction with intra-gap energy states localized at the waveguide surface. Light intensity is measured through a ContactLess Integrated Photonic Probe (CLIPP) that introduces no measurable extra-photon absorption and a phase perturbation as low as 0.2 mrad, comparable to thermal fluctuations of less than 3 mK. Multipoint light monitoring is demonstrated with a sensitivity of -30 dBm and a dynamic range of 40 dB. CLIPP technology is simple, inherently CMOS compatible, and scalable to hundreds of probing points per chip. This concept provides a viable way to real-time conditioning and feedback control of densely-integrated photonic systems. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Comment on "Linear and passive silicon optical isolator" in Scientific Reports 2, 674

Authors: Alexander Petrov, Dirk Jalas, Manfred Eich, Wolfgang Freude, Shanhui Fan, Zongfu Yu, Roel Baets, Miloš Popović, Andrea Melloni, John D. Joannopoulos, Mathias Vanwolleghem, Christopher R. Doerr, Hagen Renner

Abstract: Wang et al. [1] demonstrated different power transmission coefficients for forward and backward propagation in simulation and experiment. From such a demonstration, the central claim of their paper is that "the spatial inversion symmetry breaking diode can construct an optical isolator in no conflict with any reciprocal principle". Their claim contradicts the Lorentz reciprocity theorem, from whic… ▽ More Wang et al. [1] demonstrated different power transmission coefficients for forward and backward propagation in simulation and experiment. From such a demonstration, the central claim of their paper is that "the spatial inversion symmetry breaking diode can construct an optical isolator in no conflict with any reciprocal principle". Their claim contradicts the Lorentz reciprocity theorem, from which it is well known that one cannot construct an isolator this way. △ Less

Submitted 30 January, 2013; originally announced January 2013.

Comment to "Nonreciprocal Light Propagation in a Silicon Photonic Circuit"

Authors: Roel Baets, Wolfgang Freude, Andrea Melloni, Miloš Popović, Mathias Vanwolleghem

Abstract: In the article "Nonreciprocal Light Propagation in a Silicon Photonic Circuit" (Science 333, 729-733 (2011) a nonreciprocal waveguide system based on a combination of silicon, dielectrics and metals is reported. In this Comment it is explained that the interpretation with respect to nonreciprocity in this paper is incorrect and conflicts with the fundamental Lorentz reciprocity theorem. It is furt… ▽ More In the article "Nonreciprocal Light Propagation in a Silicon Photonic Circuit" (Science 333, 729-733 (2011) a nonreciprocal waveguide system based on a combination of silicon, dielectrics and metals is reported. In this Comment it is explained that the interpretation with respect to nonreciprocity in this paper is incorrect and conflicts with the fundamental Lorentz reciprocity theorem. It is further pointed out that a previous publication already introduced the device concept. △ Less

Submitted 12 October, 2011; originally announced October 2011.