-
Self-referencing photothermal common-path interferometry to measure absorption of Si3N4 membranes for laser-light sails
Authors:
Demeng Feng,
Tanuj Kumar,
Shenwei Yin,
Merlin Mah,
Phyo Lin,
Margaret Fortman,
Gabriel R. Jaffe,
Chenghao Wan,
Hongyan Mei,
Yuzhe Xiao,
Ron Synowicki,
Ronald J. Warzoha,
Victor W. Brar,
Joseph J. Talghader,
Mikhail A. Kats
Abstract:
Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled to high speeds by lasers with high intensities. The sails must comprise materials with low optical loss, to minimize the risk of laser damage. Stoichiometric silicon nitride (Si$_3$N$_4$) is a candidate material with low loss in the near infrared, but the precise absorption coefficient has not been characterized i…
▽ More
Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled to high speeds by lasers with high intensities. The sails must comprise materials with low optical loss, to minimize the risk of laser damage. Stoichiometric silicon nitride (Si$_3$N$_4$) is a candidate material with low loss in the near infrared, but the precise absorption coefficient has not been characterized in the membrane form-factor needed for sails. We use photothermal common-path interferometry (PCI), a sensitive pump-probe technique, to measure the absorption coefficient of stoichiometric and nonstoichiometric silicon nitride. To calibrate PCI measurements of membranes, we developed a self-referencing technique where a measurement is performed twice: once on a bare membrane, and a second time with a monolayer of graphene deposited on the membrane. The absorption of the sample with graphene can be measured by both PCI and more-conventional spectroscopic techniques, enabling the calibration of the PCI measurement. We find that with an absorption coefficient of (2.09 $\pm$ 0.76) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, Si$_3$N$_4$ is a suitable laser-sail material for laser intensities as high as ~10 GW/m$^{2}$, which have been proposed for some laser-sail missions, while silicon-rich SiN$_x$ (x~1), with an absorption coefficient of 7.94 $\pm$ 0.50 cm$^{-1}$, is unlikely to survive such high laser intensities.
△ Less
Submitted 5 April, 2024;
originally announced April 2024.
-
Atomic magnetometry using a metasurface polarizing beamsplitter in silicon on sapphire
Authors:
Xuting Yang,
Pritha Mukherjee,
Minjeong Kim,
Hongyan Mei,
Chengyu Fang,
Soyeon Choi,
Yuhan Tong,
Sarah Perlowski,
David A. Czaplewski,
Alan M. Dibos,
Mikhail A. Kats,
Jennifer T. Choy
Abstract:
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasu…
▽ More
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasurface into an atomic magnetometer based on nonlinear magneto-optical rotation and measured sub-nanotesla sensitivity, which is limited by low-frequency technical noise and transmission loss through the metasurface. To our knowledge, this work represents the first demonstration of SOS nanophotonics for atom-based sensing and paves the way for highly integrated, miniaturized atomic sensors with enhanced sensitivity and portability.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Molten flux growth of single crystals of quasi-1D hexagonal chalcogenide BaTiS3
Authors:
Huandong Chen,
Shantanu Singh,
Hongyan Mei,
Guodong Ren,
Boyang Zhao,
Mythilli Surendran,
Yan-Ting Wang,
Rohan Mishra,
Mikhail A. Kats,
Jayakanth Ravichandran
Abstract:
BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux…
▽ More
BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux of either potassium iodide, or a mixture of barium chloride and barium iodide. The crystals obtained through this method exhibit a substantial increase in volume compared to those synthesized via the chemical vapor transport method, while preserving their intrinsic optical and electronic properties. Our flux growth method provides a promising route towards the production of high-quality, large-scale single crystals of BaTiS3, which will greatly facilitate advanced characterizations of BaTiS3 and its practical applications that require large crystal dimensions. Additionally, our approach offers an alternative synthetic route for other emerging complex chalcogenides.
△ Less
Submitted 9 March, 2024;
originally announced March 2024.
-
Erbium-doped WS$_2$ with Down- and Up-Conversion Photoluminescence Integrated on Silicon for Heterojunction Infrared Photodetection
Authors:
Qiuguo Li,
Hao Rao,
Haijuan Mei,
Zhengting Zhao,
Wei** Gong,
Andrea Camposeo,
Dario Pisignano,
Xianguang Yang
Abstract:
The integration of 2D nanomaterials with silicon is expected to enrich the applications of 2D functional nanomaterials and to pave the way for next-generation, nanoscale optoelectronics with enhanced performances. Herein, a strategy for rare earth element do** has been utilized for the synthesis of 2D WS$_2$:Er nanosheets to achieve up-conversion and down-conversion emission ranging from visible…
▽ More
The integration of 2D nanomaterials with silicon is expected to enrich the applications of 2D functional nanomaterials and to pave the way for next-generation, nanoscale optoelectronics with enhanced performances. Herein, a strategy for rare earth element do** has been utilized for the synthesis of 2D WS$_2$:Er nanosheets to achieve up-conversion and down-conversion emission ranging from visible to the near-infrared region. Moreover, the potential integration of the synthesized 2D nanosheets in silicon platforms is demonstrated by the realization of an infrared photodetector based on a WS$_2$:Er/Si heterojunction. These devices operate at room temperature and show a high photoresponsivity of ~39.8 mA/W (at 980 nm) and a detectivity of 2.79 $\times$ 10$^{10}$ cm Hz$^{1/2}$ W$^{-1}$. Moreover, the dark current and noise power density are suppressed effectively by van der Waals assisted p-n heterojunction. This work fundamentally contributes to establishing infrared detection by rare element do** of 2D materials in heterojunctions with Si, at the forefront of infrared 2D materials-based photonics.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Amplification of light pulses with orbital angular momentum (OAM) in nitrogen ions lasing
Authors:
Haicheng Mei,
**gsong Gao,
Kailu Wang,
Jiahao Dong,
Qihuang Gong,
Chengyin Wu,
Yunquan Liu,
Hongbing Jiang,
Yi Liu
Abstract:
Nitrogen ions pumped by intense femtosecond laser pulses give rise to optical amplification in the ultraviolet range. Here, we demonstrated that a seed light pulse carrying orbital angular momentum (OAM) can be significantly amplified in nitrogen plasma excited by a Gaussian femtosecond laser pulse. With the topological charge of +1 and -1, we observed an energy amplification of the seed light pul…
▽ More
Nitrogen ions pumped by intense femtosecond laser pulses give rise to optical amplification in the ultraviolet range. Here, we demonstrated that a seed light pulse carrying orbital angular momentum (OAM) can be significantly amplified in nitrogen plasma excited by a Gaussian femtosecond laser pulse. With the topological charge of +1 and -1, we observed an energy amplification of the seed light pulse by two orders of magnitude, while the amplified pulse carries the same OAM as the incident seed pulse. Moreover, we show that a spatial misalignment of the plasma amplifier with the OAM seed beam leads to an amplified emission of Gaussian mode without OAM, due to the special spatial profile of the OAM seed pulse that presents a donut-shaped intensity distribution. Utilizing this misalignment, we can implement an optical switch that toggles the output signal between Gaussian mode and OAM mode. This work not only certifies the phase transfer from the seed light to the amplified signal, but also highlights the important role of spatial overlap of the donut-shaped seed beam with the gain region of the nitrogen plasma for the achievement of OAM beam amplification.
△ Less
Submitted 10 July, 2023; v1 submitted 9 July, 2023;
originally announced July 2023.
-
Development of low-threshold detectors for low-mass dark matter searches with a p-type germanium detector operated at cryogenic temperature
Authors:
Mathbar Raut,
Dongming Mei,
Sanjay Bhattarai,
Rajendra Panth,
Kyler Kooi,
Hao Mei,
Guojian Wang
Abstract:
This study investigates new technology for enhancing the sensitivity of low-mass dark matter detection by analyzing charge transport in a p-type germanium detector at 5.2 K. To achieve low-threshold detectors, precise calculations of the binding energies of dipole and cluster dipole states, as well as the cross-sections of trap** affected by the electric field, are essential. The detector was op…
▽ More
This study investigates new technology for enhancing the sensitivity of low-mass dark matter detection by analyzing charge transport in a p-type germanium detector at 5.2 K. To achieve low-threshold detectors, precise calculations of the binding energies of dipole and cluster dipole states, as well as the cross-sections of trap** affected by the electric field, are essential. The detector was operated in two modes: depleted at 77 K before cooling to 5.2 K and cooled directly to 5.2 K with various bias voltages. Our results indicate that the second mode produces lower binding energies and suggests different charge states under varying operating modes. Notably, our measurements of the dipole and cluster dipole state binding energies at zero fields were $8.716\pm 0.435$ meV and $6.138\pm 0.308$ meV, respectively. These findings have strong implications for the development of low-threshold detectors for detecting low-mass dark matter in the future.
△ Less
Submitted 3 May, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Colossal optical anisotropy from atomic-scale modulations
Authors:
Hongyan Mei,
Guodong Ren,
Boyang Zhao,
Jad Salman,
Gwan Yeong Jung,
Huandong Chen,
Shantanu Singh,
Arashdeep S. Thind,
John Cavin,
Jordan A. Hachtel,
Miaofang Chi,
Shanyuan Niu,
Graham Joe,
Chenghao Wan,
Nick Settineri,
Simon J. Teat,
Bryan C. Chakoumakos,
Jayakanth Ravichandran,
Rohan Mishra,
Mikhail A. Kats
Abstract:
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface pol…
▽ More
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses.
△ Less
Submitted 21 July, 2023; v1 submitted 28 February, 2023;
originally announced March 2023.
-
Atmospheric turbulence does not change the degree of polarization of vector beams
Authors:
Zhiwei Tao,
Azezigul Abdukirim,
Congming Dai,
Pengfei Wu,
Hai** Mei,
Yichong Ren,
Chuankai Luo,
Ruizhong Rao,
Heli Wei
Abstract:
We propose a novel theoretical framework to demonstrate vector beams whose degree of polarization does not change on atmospheric propagation. Inspired by the Fresnel equations, we derive the reflective and refractive field of vector beams propagating through a phase screen by employing the continuity of electromagnetic field. We generalize the conventional split-step beam propagation method by con…
▽ More
We propose a novel theoretical framework to demonstrate vector beams whose degree of polarization does not change on atmospheric propagation. Inspired by the Fresnel equations, we derive the reflective and refractive field of vector beams propagating through a phase screen by employing the continuity of electromagnetic field. We generalize the conventional split-step beam propagation method by considering the vectorial properties in the vacuum diffraction and the refractive properties of a single phase screen. Based on this vectorial propagation model, we extensively calculate the change of degree of polarization (DOP) of vector beams under different beam parameters and turbulence parameters both in free-space and satellite-mediated links. Our result is that whatever in the free-space or satellite-mediated regime, the change of DOP mainly fluctuates around the order of $10^{-13}$ to $10^{-6}$, which is almost negligible.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Development of Low-Threshold Detectors for Low-Mass Dark Matter Searches Using an N-Type Germanium Detector at 5.2 K
Authors:
Sanjay Bhattarai,
Dongming Mei,
Rajendra Panth,
Mathbar Raut,
Kyler Kooi,
Hao Mei,
Guojian Wang
Abstract:
We investigated charge transport in an n-type germanium detector at 5.2 K to explore new technology for enhancing low-mass dark matter detection sensitivity. Calculations of dipole and cluster dipole state binding energies and electric field-dependent trap** cross-sections are critical to develo** low-threshold detectors. The detector operates in two modes: depleting at 77K before cooling, or…
▽ More
We investigated charge transport in an n-type germanium detector at 5.2 K to explore new technology for enhancing low-mass dark matter detection sensitivity. Calculations of dipole and cluster dipole state binding energies and electric field-dependent trap** cross-sections are critical to develo** low-threshold detectors. The detector operates in two modes: depleting at 77K before cooling, or directly cooling to 5.2 K and applying different bias voltages. Results indicated lower binding energy of charge states in the second mode, at zero field and under an electric field, suggesting different charge states formed under different operating modes. Measured cluster dipole and dipole state binding energies at zero field were 7.884$\pm$0.644 meV and 8.369$\pm$0.748 meV, respectively, signifying high low-threshold potential for low-mass dark matter searches in the future.
△ Less
Submitted 16 February, 2023;
originally announced February 2023.
-
Metasurface-enhanced mid-infrared spectrochemical imaging of tissues
Authors:
S. Rosas,
K. A. Schoeller,
E. Chang,
H. Mei,
M. A. Kats,
K. W. Eliceiri,
X. Zhao,
F. Yesilkoy
Abstract:
Label-free and nondestructive mid-infrared vibrational hyperspectral imaging is emerging as an important ex-vivo tissue analysis tool, providing spatially resolved biochemical information critical to understanding physiological and pathological processes. However, the chemically complex and spatially heterogeneous composition of tissue specimens and the inherently weak interaction of infrared ligh…
▽ More
Label-free and nondestructive mid-infrared vibrational hyperspectral imaging is emerging as an important ex-vivo tissue analysis tool, providing spatially resolved biochemical information critical to understanding physiological and pathological processes. However, the chemically complex and spatially heterogeneous composition of tissue specimens and the inherently weak interaction of infrared light with biomolecules limit the analytical performance of infrared absorption spectroscopy. Here, we introduce an advanced mid-infrared spectrochemical tissue imaging modality using metasurfaces that support strong surface-localized electromagnetic fields to capture quantitative molecular maps of large-area murine brain-tissue sections. Our approach leverages polarization-multiplexed multi-resonance plasmonic metasurfaces to simultaneously detect many different functional biomolecules. The resulting surface-enhanced mid-infrared spectral imaging (SE-MIRSI) method eliminates the non-specific effects of bulk tissue morphology on the quantitative analysis of fingerprint spectra and improves the chemical selectivity. We show that the metasurface enhancement increases the retrieval of amide I and II absorption bands associated with secondary structures of proteins. Moreover, we demonstrate that plasmonic metasurfaces enhance the chemical contrast in infrared images and enable the detection of ultrathin tissue regions that are not otherwise visible to conventional mid-infrared spectral imaging. While we tested our approach on murine brain tissue sections, this chemical imaging method is well-suited for any tissue type, which significantly broadens the potential impacts of our method for both translational research and clinical histopathology.
△ Less
Submitted 26 April, 2023; v1 submitted 14 January, 2023;
originally announced January 2023.
-
Heavily doped zinc oxide with plasma frequencies in the telecommunication wavelength range
Authors:
Alexander Koch,
Hongyan Mei,
Jura Rensberg,
Martin Hafermann,
Jad Salman,
Chenghao Wan,
Raymond Wambold,
Daniel Blaschke,
Heidemarie Schmidt,
Jürgen Salfeld,
Sebastian Geburt,
Mikhail A. Kats,
Carsten Ronning
Abstract:
We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved…
▽ More
We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved heavily doped ZnO:Ga with free-carrier concentrations of ~10^21 cm^(-3), resulting in a plasma wavelength of 1.02 um, which is substantially shorter than the telecommunication wavelength of 1.55 um. Thus, our approach enables the control of the plasma frequency of ZnO from the far infrared down to 1.02 um, providing a promising plasmonic material for applications in this regime.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Evidence of cluster dipole states in germanium detectors operating at temperatures below 10 K
Authors:
D. -M. Mei,
R. Panth,
K. Kooi,
H. Mei,
S. Bhattarai,
M. Raut,
P. Acharya,
G. -J. Wang
Abstract:
By studying charge trap** in germanium (Ge) detectors operating at temperatures below 10 K, we demonstrate for the first time that the formation of cluster dipole states from residual impurities is responsible for charge trap**. Two planar detectors with different impurity levels and types are used in this study. When drifting the localized charge carriers created by $α$ particles from the top…
▽ More
By studying charge trap** in germanium (Ge) detectors operating at temperatures below 10 K, we demonstrate for the first time that the formation of cluster dipole states from residual impurities is responsible for charge trap**. Two planar detectors with different impurity levels and types are used in this study. When drifting the localized charge carriers created by $α$ particles from the top surface across a detector under a lower bias voltage, significant charge trap** is observed when compared to operating at a higher bias voltage. The amount of charge trap** shows a strong dependence on the type of charge carriers. Electrons are trapped more than holes in a p-type detector while holes are trapped more than electrons in a n-type detector. When both electrons and holes are drifted simultaneously using the widespread charge carriers created by $γ$ rays inside the detector, the amount of charge trap** shows no dependence on the polarity of bias voltage.
△ Less
Submitted 18 May, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams
Authors:
Hongyan Mei,
Alexander Koch,
Chenghao Wan,
Jura Rensberg,
Zhen Zhang,
Jad Salman,
Martin Hafermann,
Maximilian Schaal,
Yuzhe Xiao,
Raymond Wambold,
Shriram Ramanathan,
Carsten Ronning,
Mikhail A. Kats
Abstract:
We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subs…
▽ More
We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, vanadium dioxide (VO2), locally modifying its insulator-to-metal transition (IMT) temperature by range of ~25 degrees C. Such area-selective modification of metal oxides by direct writing using a FIB provides a simple, mask-less route to the fabrication of optical structures, especially when multiple or continuous levels of do** or defect density are required.
△ Less
Submitted 2 June, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Efficient generation of optical bottle beams
Authors:
Yuzhe Xiao,
Zhaoning Yu,
Raymond A. Wambold,
Hongyan Mei,
Garrett Hickman,
Randall H. Goldsmith,
Mark Saffman,
Mikhail A. Kats
Abstract:
Optical bottle beams can be used to trap atoms and small low-index particles. We introduce a figure of merit for optical bottle beams, specifically in the context of optical traps, and use it to compare optical bottle-beam traps obtained by three different methods. Using this figure of merit and an optimization algorithm, we identified optical bottle-beam traps based on a Gaussian beam illuminatin…
▽ More
Optical bottle beams can be used to trap atoms and small low-index particles. We introduce a figure of merit for optical bottle beams, specifically in the context of optical traps, and use it to compare optical bottle-beam traps obtained by three different methods. Using this figure of merit and an optimization algorithm, we identified optical bottle-beam traps based on a Gaussian beam illuminating a metasurface that are superior in terms of power efficiency than existing approaches. We numerically demonstrate a silicon metasurface for creating an optical bottle-beam trap.
△ Less
Submitted 16 May, 2021;
originally announced May 2021.
-
Development of Planar P-type Point Contact Germanium Detectors for Low-Mass Dark Matter Searches
Authors:
W. -Z. Wei,
H. Mei,
K. Kooi,
D. -M. Mei,
J. Liu,
J. -C. Li,
R. Panth,
G. -J. Wang
Abstract:
The detection of low-energy deposition in the range of sub-eV through ionization using germanium (Ge) with a bandgap of $\sim$0.7 eV requires internal amplification of charge signal. This can be achieved through high electric field which accelerates charge carriers to generate more charge carriers. The minimum electric field required to generate internal charge amplification is derived for differe…
▽ More
The detection of low-energy deposition in the range of sub-eV through ionization using germanium (Ge) with a bandgap of $\sim$0.7 eV requires internal amplification of charge signal. This can be achieved through high electric field which accelerates charge carriers to generate more charge carriers. The minimum electric field required to generate internal charge amplification is derived for different temperatures. A point contact Ge detector provides extremely high electric field in proximity to the point contact. We show the development of a planar point contact detector and its performance. The field distribution is calculated for this planar point contact detector. We demonstrate the required electric field can be achieved with a point contact detector.
△ Less
Submitted 6 October, 2021; v1 submitted 5 May, 2021;
originally announced May 2021.
-
High-resolution ARPES endstation for in-situ electronic structure investigations at SSRF
Authors:
Yi-Chen Yang,
Zheng-Tai Liu,
Ji-Shan Liu,
Zhong-Hao Liu,
Wan-Ling Liu,
Xiang-Le Lu,
Hong-** Mei,
Ang Li,
Mao Ye,
Shan Qiao,
Da-Wei Shen
Abstract:
Angle-resolved photoemission spectroscopy (ARPES) is one of the most powerful experimental techniques in condensed matter physics. Synchrotron ARPES, which uses photons with high flux and continuously tunable energy, has become particularly important. However, an excellent synchrotron ARPES system must have features such as a small beam spot, super-high energy resolution, and a user-friendly opera…
▽ More
Angle-resolved photoemission spectroscopy (ARPES) is one of the most powerful experimental techniques in condensed matter physics. Synchrotron ARPES, which uses photons with high flux and continuously tunable energy, has become particularly important. However, an excellent synchrotron ARPES system must have features such as a small beam spot, super-high energy resolution, and a user-friendly operation interface. A synchrotron beamline and an endstation (BL03U) were designed and constructed at the Shanghai Synchrotron Radiation Facility. The beam spot size at the sample position is 7.5 (V) $μ$m $\times$ 67 (H) $μ$m, and the fundamental photon range is 7-165 eV; the ARPES system enables photoemission with an energy resolution of 2.67 [email protected] eV. In addition, the ARPES system of this endstation is equipped with a six-axis cryogenic sample manipulator (the lowest temperature is 7 K) and is integrated with an oxide molecular beam epitaxy system and a scanning tunneling microscope, which can provide an advanced platform for in-situ characterization of the fine electronic structure of condensed matter.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Implication of the Temperature-Dependent Charge Barrier Height of Amorphous Germanium Contact Detector in Searching for Rare Event Physics
Authors:
R. Panth,
W. -Z. Wei,
D. -M. Mei,
J. Liu,
S. Bhattarai,
H. Mei,
M. Raut,
P. Acharya,
K. Kooi,
G. -J. Wang
Abstract:
The exploration of germanium (Ge) detectors with amorphous Ge (a-Ge) contacts has drawn attention to the searches for rare-event physics such as dark matter and neutrinoless double-beta decay. The charge barrier height (CBH) of the a-Ge contacts deposited on the detector surface is crucial to suppress the leakage current of the detector in order to achieve la ow-energy detection threshold and high…
▽ More
The exploration of germanium (Ge) detectors with amorphous Ge (a-Ge) contacts has drawn attention to the searches for rare-event physics such as dark matter and neutrinoless double-beta decay. The charge barrier height (CBH) of the a-Ge contacts deposited on the detector surface is crucial to suppress the leakage current of the detector in order to achieve la ow-energy detection threshold and high-energy resolution. The temperature-dependent CBH of a-Ge contacts for three Ge detectors is analyzed to study the bulk leakage current (BLC) characteristics. The detectors were fabricated at the University of South Dakota using homegrown crystals. The CBH is determined from the BLC when the detectors are operated in the reverse bias mode with a guard-ring structure, which separates the BLC from the surface leakage current (SLC). The results show that CBH is temperature dependent. The direct relation of the CBH variation to temperature is related to the barrier inhomogeneities created on the interface of a-Ge and crystalline Ge. The inhomogeneities that occur at the interface were analyzed using the Gaussian distribution model for three detectors. The CBH of a-Ge contact is projected to zero temperature. The implication of the CBH at zero temperature is discussed for Ge detectors with a-Ge contacts in searching for rare-event physics.
△ Less
Submitted 2 April, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Correcting thermal-emission-induced detector saturation in infrared reflection or transmission spectroscopy
Authors:
C. Yao,
H. Mei,
Y. Xiao,
A. Shahsafi,
W. Derdeyn,
J. L. King,
C. Wan,
R. O. Scarlat,
M. H. Anderson,
M. A. Kats
Abstract:
We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens (e.g., using an infrared microscope). These errors arise as a result of partial detector saturation due to thermal emission from the measured…
▽ More
We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens (e.g., using an infrared microscope). These errors arise as a result of partial detector saturation due to thermal emission from the measured sample reaching the detector, resulting in nonphysical apparent reduction of reflectance or transmittance with increasing sample temperature. Here, we demonstrate that these temperature-dependent errors can be corrected by implementing several levels of optical attenuation that enable "convergence testing" of the measured reflectance or transmittance as the thermal-emission signal is reduced, or by applying correction factors that can be inferred by looking at the spectral regions where the sample is not expected to have a substantial temperature dependence.
△ Less
Submitted 25 March, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
Characterization of High-Purity Germanium Detectors with Amorphous Germanium Contacts in Cryogenic Liquids
Authors:
R. Panth,
J. Liu,
I. Abt,
X. Liu,
O. Schulz,
W. -Z. Wei,
H. Mei,
D. -M. Mei,
G. -J. Wang
Abstract:
For the first time, planar high-purity germanium detectors with thin amorphous germanium contacts were successfully operated directly in liquid nitrogen and liquid argon in a cryostat at the Max-Planck-Institut fuer Physics in Munich. The detectors were fabricated at the Lawrence Berkeley National Laboratory and the University of South Dakota, using crystals grown at the University of South Dakota…
▽ More
For the first time, planar high-purity germanium detectors with thin amorphous germanium contacts were successfully operated directly in liquid nitrogen and liquid argon in a cryostat at the Max-Planck-Institut fuer Physics in Munich. The detectors were fabricated at the Lawrence Berkeley National Laboratory and the University of South Dakota, using crystals grown at the University of South Dakota. They survived long-distance transportation and multiple thermal cycles in both cryogenic liquids and showed reasonable leakage currents and spectroscopic performance. Also discussed are the pros and cons of using thin amorphous semiconductor materials as an alternative contact technology in large-scale germanium experiments searching for physics beyond the Standard Model.
△ Less
Submitted 3 August, 2020; v1 submitted 30 March, 2020;
originally announced March 2020.
-
Investigation of the Electrical Conduction Mechanisms in P-type Amorphous Germanium (a-Ge) Used as a-Ge Contacts for Ge Detectors
Authors:
S. Bhattarai,
R. Panth,
W. -Z. Wei,
H. Mei,
D. -M. Mei,
M. S. Raut,
P. Acharya,
W. -J. Wang
Abstract:
Electrical conduction mechanisms in the disordered material system is experimentally studied for p-type amorphous germanium (a-Ge) used for high-purity Ge detector contacts. The localization length and the hop** parameters in a-Ge are determined using the surface leakage current measured from three high-purity planar Ge detectors. The temperature-dependent hop** distance and hop** energy are…
▽ More
Electrical conduction mechanisms in the disordered material system is experimentally studied for p-type amorphous germanium (a-Ge) used for high-purity Ge detector contacts. The localization length and the hop** parameters in a-Ge are determined using the surface leakage current measured from three high-purity planar Ge detectors. The temperature-dependent hop** distance and hop** energy are obtained for a-Ge fabricated as the electrical contact materials for high-purity Ge planar detectors. As a result, we find that the hop** energy in a-Ge increases as temperature increases while the hop** distance in a-Ge decreases as temperature increases. The localization length of a-Ge is on the order of $2.13^{-0.05}_{+0.07} A^\circ$ to $5.07^{-0.83}_{+2.58}A^\circ$, depending on the density of states near the Fermi energy level within bandgap. Using these parameters, we predict that the surface leakage current from a Ge detector with a-Ge contacts can be much smaller than one yocto amp (yA) at helium temperature, suitable for rare-event physics searches.
△ Less
Submitted 7 September, 2020; v1 submitted 17 February, 2020;
originally announced February 2020.
-
Characterization of High-Purity Germanium (Ge) Crystals for Develo** Novel Ge Detectors
Authors:
M. -S. Raut,
H. Mei,
D. -M. Mei,
S. Bhattarai,
W. -Z. Wei,
R. Panda,
P. Acharya,
G. -J. Wang
Abstract:
High-purity germanium (HPGe) crystals are required to be well-characterized before being fabricated into Ge detectors. The characterization of HPGe crystals is often performed with the Hall Effect system, which measures the carrier concentration, the Hall mobility, and the electrical resistivity. The reported values have a strong dependence on the size of the ohmic contacts and the geometry of the…
▽ More
High-purity germanium (HPGe) crystals are required to be well-characterized before being fabricated into Ge detectors. The characterization of HPGe crystals is often performed with the Hall Effect system, which measures the carrier concentration, the Hall mobility, and the electrical resistivity. The reported values have a strong dependence on the size of the ohmic contacts and the geometry of the samples used in conducting the Hall Effect measurements. We conduct a systematic study using four samples cut from the same location in a HPGe crystal made into different sized ohmic contacts or different geometries to study the variation of the measured parameters from the Hall Effect system. The results are compared to the C-V measurements provided by the Ge detector made from the same crystal. We report the systematic errors involved with the Hall Effect system and find a reliable technique that minimizes the systematic error to be only a few percent from the Hall Effect measurements.
△ Less
Submitted 22 July, 2020; v1 submitted 17 February, 2020;
originally announced February 2020.
-
The Impact of the Charge Barrier Height on Germanium (Ge) Detectors with Amorphous-Ge Contacts for Light Dark Matter Searches
Authors:
W. -Z. Wei,
R. Panth,
J. Liu,
H. Mei,
D. -M. Mei,
G. -J. Wang
Abstract:
Germanium (Ge) detectors with ability of measuring a single electron-hole (e-h) pair are needed in searching for light dark matter (LDM) down to the MeV scale. We investigate the feasibility of Ge detectors with amorphous-Ge (a-Ge) contacts to achieve the sensitivity of measuring a single e-h pair, which requires extremely low leakage current. Three Ge detectors with a-Ge contacts are used to stud…
▽ More
Germanium (Ge) detectors with ability of measuring a single electron-hole (e-h) pair are needed in searching for light dark matter (LDM) down to the MeV scale. We investigate the feasibility of Ge detectors with amorphous-Ge (a-Ge) contacts to achieve the sensitivity of measuring a single e-h pair, which requires extremely low leakage current. Three Ge detectors with a-Ge contacts are used to study the charge barrier height for blocking electrons and holes. Using the measured bulk leakage current and the D$\ddot{o}$hler-Brodsky model, we obtain the values for charge barrier height and the density of localized energy states near the Fermi energy level for the top and bottom contacts, respectively. We predict that the bulk leakage current is extremely small and can be neglected at helium temperature ($\sim$4 K). Thus, Ge detectors with a-Ge contacts possess the potential to measure a single e-h pair for detecting LDM particles.
△ Less
Submitted 28 April, 2020; v1 submitted 9 February, 2020;
originally announced February 2020.
-
Guidelines for measurement of thermal emission
Authors:
Yuzhe Xiao,
Chenghao Wan,
Alireza Shahsafi,
Jad Salman,
Zhaoning Yu,
Raymond Wambold,
Hongyan Mei,
Bryan E. Rubio Perez,
Chunhui Yao,
Mikhail A. Kats
Abstract:
Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in…
▽ More
Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in part due to the presence of background emission from the surrounding environment and the measurement instrument itself. This is especially true for measurements of emitters at temperatures close to that of the environment, where the impact of background emission is relatively large. In this paper, we describe, recommend, and demonstrate general procedures for thermal-emission measurements that are applicable to most experimental conditions, including less-common and more-challenging cases that include thermal emitters with temperature-dependent emissivity and emitters that are not in thermal equilibrium.
△ Less
Submitted 19 November, 2019; v1 submitted 8 November, 2019;
originally announced November 2019.
-
Impact of Charge Trap** on the Energy Resolution of Ge Detectors for Rare-Event Physics Searches
Authors:
D. -M. Mei,
R. B Mukund,
W. -Z. Wei,
R. Panth,
J. Liu,
H. Mei,
Y. -Y. Li,
P. Acharya,
S. Bhattarai,
K. Kooi,
M-S. Raut,
X. -S. Sun,
A. Kirkvold,
K. -M. Dong,
X. -H. Meng,
G. -J. Wang,
G. Yang
Abstract:
Charge trap** degrades the energy resolution of germanium (Ge) detectors, which require to have increased experimental sensitivity in searching for dark matter and neutrinoless double-beta decay. We investigate the charge trap** processes utilizing nine planar detectors fabricated from USD-grown crystals with well-known net impurity levels. The charge collection efficiency as a function of cha…
▽ More
Charge trap** degrades the energy resolution of germanium (Ge) detectors, which require to have increased experimental sensitivity in searching for dark matter and neutrinoless double-beta decay. We investigate the charge trap** processes utilizing nine planar detectors fabricated from USD-grown crystals with well-known net impurity levels. The charge collection efficiency as a function of charge trap** length is derived from the Shockley-Ramo theorem. Furthermore, we develop a model that correlates the energy resolution with the charge collection efficiency. This model is then applied to the experimental data. As a result, charge collection efficiency and charge trap** length are determined accordingly. Utilizing the Lax model (further developed by CDMS collaborators), the absolute impurity levels are determined for nine detectors. The knowledge of these parameters when combined with other traits such as the Fano factor serve as a reliable indicator of the intrinsic nature of charge trap** within the crystals. We demonstrate that electron trap** is more severe than hole trap** in a p-type detector and the charge collection efficiency depends on the absolute impurity level of the Ge crystal when an adequate bias voltage is applied to the detector. Negligible charge trap** is found when the absolute impurity level is less than 1.0$\times$10$^{11}/$cm$^{3}$ for collecting electrons and 2.0$\times$10$^{11}/$cm$^{3}$ for collecting holes.
△ Less
Submitted 28 April, 2020; v1 submitted 12 September, 2019;
originally announced September 2019.
-
Fabrication and Characterization of High-Purity Germanium Detectors with Amorphous Germanium Contacts
Authors:
X. -H. Meng,
G. -J. Wang,
M. -D. Wagner,
H. Mei,
W. -Z. Wei,
J. Liu,
G. Yang,
D. -M. Mei
Abstract:
Large, high-purity, germanium (HPGe) detectors are needed for neutrinoless double-beta decay and dark matter experiments. Currently, large (> 4 inches in diameter) HPGe crystals can be grown at the University of South Dakota (USD). We verify that the quality of the grown crystals is sufficient for use in large detectors by fabricating and characterizing smaller HPGe detectors made from those cryst…
▽ More
Large, high-purity, germanium (HPGe) detectors are needed for neutrinoless double-beta decay and dark matter experiments. Currently, large (> 4 inches in diameter) HPGe crystals can be grown at the University of South Dakota (USD). We verify that the quality of the grown crystals is sufficient for use in large detectors by fabricating and characterizing smaller HPGe detectors made from those crystals. We report the results from eight detectors fabricated over six months using crystals grown at USD. Amorphous germanium (a-Ge) contacts are used for blocking both electrons and holes. Two types of geometry were used to fabricate HPGe detectors. As a result, the fabrication process of small planar detectors at USD is discussed in great detail. The impact of the procedure and geometry on the detector performance was analyzed for eight detectors. We characterized the detectors by measuring the leakage current, capacitance, and energy resolution at 662 keV with a Cs-137 source. Four detectors show good performance, which indicates that crystals grown at USD are suitable for making HPGe detectors.
△ Less
Submitted 14 February, 2019; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Investigation of Amorphous Germanium Contact Properties with Planar Detectors Made from Home-Grown Germanium Crystals
Authors:
W. -Z. Wei,
X. -H. Meng,
Y. -Y. Yang,
J. Liu,
G. -J. Wang,
H. Mei,
G. Gang,
D. -M. Mei,
C. Zhang
Abstract:
The characterization of detectors fabricated from home-grown crystals is the most direct way to study crystal properties. We fabricated planar detectors from high-purity germanium (HPGe) crystals grown at the University of South Dakota (USD). In the fabrication process, a HPGe crystal slice cut from a USD-grown crystal was coated with a high resistivity thin film of amorphous Ge (a-Ge) followed by…
▽ More
The characterization of detectors fabricated from home-grown crystals is the most direct way to study crystal properties. We fabricated planar detectors from high-purity germanium (HPGe) crystals grown at the University of South Dakota (USD). In the fabrication process, a HPGe crystal slice cut from a USD-grown crystal was coated with a high resistivity thin film of amorphous Ge (a-Ge) followed by depositing a thin layer of aluminum on top of the a-Ge film to define the physical area of the contacts. We investigated the detector performance including the $I$-$V$ characteristics, $C$-$V$ characteristics and spectroscopy measurements for a few detectors. The results document the good quality of the USD-grown crystals and electrical contacts.
△ Less
Submitted 13 December, 2018; v1 submitted 11 September, 2018;
originally announced September 2018.
-
The Large Enriched Germanium Experiment for Neutrinoless Double Beta Decay (LEGEND)
Authors:
LEGEND Collaboration,
N. Abgrall,
A. Abramov,
N. Abrosimov,
I. Abt,
M. Agostini,
M. Agartioglu,
A. Ajjaq,
S. I. Alvis,
F. T. Avignone III,
X. Bai,
M. Balata,
I. Barabanov,
A. S. Barabash,
P. J. Barton,
L. Baudis,
L. Bezrukov,
T. Bode,
A. Bolozdynya,
D. Borowicz,
A. Boston,
H. Boston,
S. T. P. Boyd,
R. Breier,
V. Brudanin
, et al. (208 additional authors not shown)
Abstract:
The observation of neutrinoless double-beta decay (0$νββ$) would show that lepton number is violated, reveal that neutrinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely…
▽ More
The observation of neutrinoless double-beta decay (0$νββ$) would show that lepton number is violated, reveal that neutrinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely low backgrounds, at the level of $\sim$0.1 count /(FWHM$\cdot$t$\cdot$yr) in the region of the signal. The current generation $^{76}$Ge experiments GERDA and the MAJORANA DEMONSTRATOR utilizing high purity Germanium detectors with an intrinsic energy resolution of 0.12%, have achieved the lowest backgrounds by over an order of magnitude in the 0$νββ$ signal region of all 0$νββ$ experiments. Building on this success, the LEGEND collaboration has been formed to pursue a tonne-scale $^{76}$Ge experiment. The collaboration aims to develop a phased 0$νββ$ experimental program with discovery potential at a half-life approaching or at $10^{28}$ years, using existing resources as appropriate to expedite physics results.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
-
Direct Detection of MeV-Scale Dark Matter Utilizing Germanium Internal Amplification for the Charge Created by the Ionization of Impurities
Authors:
D. -M. Mei,
G. -J. Wang,
H. Mei,
G. Yang,
J. Liu,
M. Wagner,
R. Panth,
K. Kooi,
Y. -Y. Li,
W. -Z. Wei
Abstract:
Light, MeV-scale dark matter (DM) is an exciting DM candidate that is undetectable by current experiments. A germanium (Ge) detector utilizing internal charge amplification for the charge carriers created by the ionization of impurities is a promising new technology with experimental sensitivity for detecting MeV-scale DM. We analyze the physics mechanisms of the signal formation, charge creation,…
▽ More
Light, MeV-scale dark matter (DM) is an exciting DM candidate that is undetectable by current experiments. A germanium (Ge) detector utilizing internal charge amplification for the charge carriers created by the ionization of impurities is a promising new technology with experimental sensitivity for detecting MeV-scale DM. We analyze the physics mechanisms of the signal formation, charge creation, charge internal amplification, and the projected sensitivity for directly detecting MeV-scale DM particles. We present a design for a novel Ge detector at helium temperature ($\sim$4 K) enabling ionization of impurities from DM impacts. With large localized E-fields, the ionized excitations can be accelerated to kinetic energies larger than the Ge bandgap at which point they can create additional electron-hole pairs, producing intrinsic amplification to achieve an ultra-low energy threshold of $\sim$0.1 eV for detecting low-mass DM particles in the MeV scale. Correspondingly, such a Ge detector with 1 kg-year exposure will have high sensitivity to a DM-nucleon cross section of $\sim$5$\times$10$^{-45}$ cm$^{2}$ at a DM mass of $\sim$10 MeV/c$^{2}$ and a DM-electron cross section of $\sim$5$\times$10$^{-46}$cm$^{2}$ at a DM mass of $\sim$1 MeV/c$^2$.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
The impact of neutral impurity concentration on charge drift mobility in n-type germanium
Authors:
H. Mei,
G. -J. Wang,
G. Yang,
D. -M. Mei
Abstract:
The impact of neutral impurity scattering of electrons on the charge drift mobility in high purity n-type germanium crystals at 77 Kelvin is investigated. We calculated the contributions from ionized impurity scattering, lattice scattering, and neutral impurity scattering to the total charge drift mobility using theoretical models. The experimental data such as charge carrier concentration, mobili…
▽ More
The impact of neutral impurity scattering of electrons on the charge drift mobility in high purity n-type germanium crystals at 77 Kelvin is investigated. We calculated the contributions from ionized impurity scattering, lattice scattering, and neutral impurity scattering to the total charge drift mobility using theoretical models. The experimental data such as charge carrier concentration, mobility and resistivity are measured by Hall Effect system at 77 Kelvin. The neutral impurity concentration is derived from the Matthiessen's rule using the measured Hall mobility and ionized impurity concentration. The radial distribution of the neutral impurity concentration in the self-grown crystals is determined. Consequently, we demonstrated that neutral impurity scattering is a significant contribution to the charge drift mobility, which has a dependence on the concentration of neutral impurities in high purity n-type germanium crystal.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
The impact of neutral impurity concentration on charge drift mobility in germanium
Authors:
H. Mei,
D. -M. Mei,
G. -J. Wang,
G. Yang
Abstract:
We reported a new result of the neutral impurity scattering of holes that has impact on the charge drift mobility in high purity p-type germanium crystals at 77 Kelvin. The charge carrier concentration, mobility and resistivity are measured by Hall Effect system at 77 Kelvin. We investigated the contribution to the total charge drift mobility from ionized impurity scattering, lattice scattering, a…
▽ More
We reported a new result of the neutral impurity scattering of holes that has impact on the charge drift mobility in high purity p-type germanium crystals at 77 Kelvin. The charge carrier concentration, mobility and resistivity are measured by Hall Effect system at 77 Kelvin. We investigated the contribution to the total charge drift mobility from ionized impurity scattering, lattice scattering, and neutral impurity scattering with the best theoretical models and experimental data. Several samples with measured Hall mobility from the grown crystals are used for this investigation. With the measured Hall mobility and ionized impurity concentration as well as the theoretical models, we calculated the neutral impurity concentration by the Matthiessen's rule. As a result, the distributions of the neutral impurity concentrations with respect to the radius of the crystals are obtained. Consequently, we demonstrated that neutral impurity scattering is a significant contribution to the charge drift mobility, which has dependence on the concentration of neutral impurities in a given germanium crystal.
△ Less
Submitted 20 December, 2016; v1 submitted 8 July, 2016;
originally announced July 2016.
-
Crystal growth and detector performance of large size high-purity Ge crystals
Authors:
Guojian Wang,
Mark Amman,
Hao Mei,
Dongming Mei,
Klaus Irmscher,
Yutong Guan,
Gang Yang
Abstract:
High-purity germanium crystals approximately 12 cm in diameter were grown in a hydrogen atmosphere using the Czochralski method. The dislocation density of the crystals was determined to be in the range of 2000 - 4200 cm-2, which meets a requirement for use as a radiation detector. The axial and radial distributions of impurities in the crystals were measured and are discussed. A planar detector w…
▽ More
High-purity germanium crystals approximately 12 cm in diameter were grown in a hydrogen atmosphere using the Czochralski method. The dislocation density of the crystals was determined to be in the range of 2000 - 4200 cm-2, which meets a requirement for use as a radiation detector. The axial and radial distributions of impurities in the crystals were measured and are discussed. A planar detector was also fabricated from one of the crystals and then evaluated for electrical and spectral performance. Measurements of gamma-ray spectra from Cs-137 and Am-241 sources demonstrate that the detector has excellent energy resolution.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Foundations of Classical Electrodynamics, Equivalence Principle and Cosmic Interactions: A Short Exposition and an Update
Authors:
Wei-Tou Ni,
Hsien-Hao Mei,
Shan-Jyun Wu
Abstract:
We look at the foundations of electromagnetism in this 1st LeCosPA Symposium. For doing this, after some review (constraints on photon mass etc.), we use two approaches. The first one is to formulate a Parametrized Post-Maxwellian (PPM) framework to include QED corrections and a pseudoscalar photon interaction. PPM framework includes lowest corrections to unified electromagnetism-gravity theories…
▽ More
We look at the foundations of electromagnetism in this 1st LeCosPA Symposium. For doing this, after some review (constraints on photon mass etc.), we use two approaches. The first one is to formulate a Parametrized Post-Maxwellian (PPM) framework to include QED corrections and a pseudoscalar photon interaction. PPM framework includes lowest corrections to unified electromagnetism-gravity theories based on connection approach. It may also overlap with corrections implemented from generalized uncertainty principle (GUP) when electromagnetism-gravity coupling is considered. We discuss various vacuum birefringence experiments - ongoing and proposed - to measure these parameters. The second approach - the chi-g framework is to look at electromagnetism in gravity and various experiments and observations to determine its empirical foundation. The SME (Standard Model Extension) and SMS (Standard Model Supplement) overlap with the chi-g framework in their photon sector. We found that the foundation is solid with the only exception of a potentially possible pseudoscalar-photon interaction. We discussed its experimental constraints and look forward to more future experiments.
△ Less
Submitted 4 April, 2012;
originally announced April 2012.
-
Axion Search with Q & A Experiment
Authors:
Hsien-Hao Mei,
Wei-Tou Ni,
Sheng-Jui Chen,
Sheau-shi Pan
Abstract:
Dark matter is a focused issue in galactic evolution and cosmology. Axion is a viable particle candidate for dark matter. Its interaction with photon is an effective way to detect it, e.g., pseudoscalar-photon interaction will generate vacuum dichroism in a magnetic field. Motivated to measure the QED vacuum birefringence and to detect pseudoscalar-photon interaction, we started to build up the…
▽ More
Dark matter is a focused issue in galactic evolution and cosmology. Axion is a viable particle candidate for dark matter. Its interaction with photon is an effective way to detect it, e.g., pseudoscalar-photon interaction will generate vacuum dichroism in a magnetic field. Motivated to measure the QED vacuum birefringence and to detect pseudoscalar-photon interaction, we started to build up the Q & A experiment (QED [Quantum Electrodynamics] and Axion experiment) in 1994. In this talk, we first give a brief historical account of planet hunting and dark matter evidence. We then review our 3.5 m Fabry-Perot interferometer together with our results of measuring vacuum dichroism and gaseous Cotton-Mouton effects. Our first results give (-0.2 $\pm$ 2.8) $\times$ 10$^{-13}$ rad/pass, at 2.3 T with 18,700 passes through a 0.6 m long magnet, for vacuum dichroism measurement. We are upgrading our interferometer to 7 m arm-length with a new 1.8 m 2.3 T permanent magnet capable of rotation up to 13 cycles per second. We aim at 10 nrad/Hz$^{1/2}$ optical sensitivity with 532 nm cavity finesse around 100,000. When achieved, vacuum dichroism would be measured to 8.6 $\times$ 10$^{-17}$ rad/pass in about 50 days, and QED birefringence would be measured to 28 %.
△ Less
Submitted 31 January, 2010; v1 submitted 25 January, 2010;
originally announced January 2010.
-
The status and prospects of the Q & A experiment with some applications
Authors:
Hsien-Hao Mei,
Wei-Tou Ni,
Sheng-Jui Chen,
Sheau-shi Pan
Abstract:
Motivated to measure the QED birefringence and to detect pseudoscalar-photon interaction, we started to build up the Q & A experiment (QED [Quantum Electrodynamics] and Axion experiment) in 1994. In this talk, we first review our 3.5 m Fabry-Perot interferometer together with our results of measuring Cotton-Mouton effects of gases. We are uprading our interferometer to 7 m armlength with a new 1…
▽ More
Motivated to measure the QED birefringence and to detect pseudoscalar-photon interaction, we started to build up the Q & A experiment (QED [Quantum Electrodynamics] and Axion experiment) in 1994. In this talk, we first review our 3.5 m Fabry-Perot interferometer together with our results of measuring Cotton-Mouton effects of gases. We are uprading our interferometer to 7 m armlength with a new 1.8 m 2.3 T permanent magnet capable of rotation up to 13 cycles per second. We will use 532 nm Nd:YAG laser as light source with cavity finesse around 100,000, and aim at 10 nrad/Hz^{1/2} optical sensitivity. With all these achieved and the upgrading of vacuum, QED birefringence would be measured to 28% in about 50 days. Along the way, we should be able to improve on the dichroism detection significantly.
△ Less
Submitted 25 November, 2009;
originally announced November 2009.
-
Measurement of the Cotton-Mouton effect in nitrogen, oxygen, carbon dioxide, argon, and krypton with the Q & A apparatus
Authors:
Hsien-Hao Mei,
Wei-Tou Ni,
Sheng-Jui Chen,
Sheau-shi Pan
Abstract:
Experiments for vacuum birefringence and vacuum dichroism have been set up with high-finesse high magnetic experimental apparatuses, which seem to be ideal for small gaseous Cotton-Mouton effect (CME) measurements. PVLAS Collaboration has measured CMEs in krypton, xenon and neon at the wavelength of 1064 nm. In this Letter, we report on our measurement of CMEs in nitrogen, oxygen, carbon dioxide…
▽ More
Experiments for vacuum birefringence and vacuum dichroism have been set up with high-finesse high magnetic experimental apparatuses, which seem to be ideal for small gaseous Cotton-Mouton effect (CME) measurements. PVLAS Collaboration has measured CMEs in krypton, xenon and neon at the wavelength of 1064 nm. In this Letter, we report on our measurement of CMEs in nitrogen, oxygen, carbon dioxide, argon, and krypton at the same wavelength in a magnetic field B = 2.3 T at pressure P = 0.5-300 Torr and temperature T = 295-298 K. Our results agree with the PVLAS results in the common cases.
△ Less
Submitted 11 February, 2009; v1 submitted 17 December, 2008;
originally announced December 2008.
-
Ellipsometry noise spectrum, suspension transfer function measurement and closed-loop control of the suspension system in the Q & A experiment
Authors:
Sheng-Jui Chen,
Hsien-Hao Mei,
Wei-Tou Ni
Abstract:
The Q & A experiment, aiming at the detection of vacuum birefringence predicted by quantum electrodynamics, consists mainly of a suspended 3.5 m Fabry-Perot cavity, a rotating permanent dipole magnet and an ellipsometer. The 2.3 T magnet can rotate up to 10 rev/s, introducing an ellipticity signal at twice the rotation frequency. The X-pendulum gives a good isolation ratio for seismic noise abov…
▽ More
The Q & A experiment, aiming at the detection of vacuum birefringence predicted by quantum electrodynamics, consists mainly of a suspended 3.5 m Fabry-Perot cavity, a rotating permanent dipole magnet and an ellipsometer. The 2.3 T magnet can rotate up to 10 rev/s, introducing an ellipticity signal at twice the rotation frequency. The X-pendulum gives a good isolation ratio for seismic noise above its main resonant frequency 0.3 Hz. At present, the ellipsometry noise decreases with frequency, from 1*10^{-5} rad Hz^{-1/2} at 5 Hz, 2*10^{-6} rad Hz^{-1/2} at 20 Hz to 5*10^{-7} rad Hz^{-1/2} at 40 Hz. The shape of the noise spectrum indicates possible improvement can be made by further reducing the movement between the cavity mirrors. From the preliminary result of yaw motion alignment control, it can be seen that some peaks due to yaw motion of the cavity mirror was suppressed. In this paper, we first give a schematic view of the Q & A experiment, and then present the measurement of transfer function of the compound X-pendulum-double pendulum suspension. A closed-loop control was carried out to verify the validity of the measured transfer functions. The ellipsometry noise spectra with and without yaw alignment control and the newest improvement is presented.
△ Less
Submitted 1 December, 2005; v1 submitted 23 August, 2005;
originally announced August 2005.
-
Suspension of the fiber mode-cleaner launcher and measurement of the high extinction-ratio (10^{-9}) ellipsometer for the Q & A experiment
Authors:
Hsien-Hao Mei,
Sheng-Jui Chen,
Wei-Tou Ni
Abstract:
The Q & A experiment, first proposed and started in 1994, provides a feasible way of exploring the quantum vacuum through the detection of vacuum birefringence effect generated by QED loop diagram and the detection of the polarization rotation effect generated by photon-interacting (pseudo-)scalar particles. Three main parts of the experiment are: (1) Optics System (including associated Electron…
▽ More
The Q & A experiment, first proposed and started in 1994, provides a feasible way of exploring the quantum vacuum through the detection of vacuum birefringence effect generated by QED loop diagram and the detection of the polarization rotation effect generated by photon-interacting (pseudo-)scalar particles. Three main parts of the experiment are: (1) Optics System (including associated Electronic System) based on a suspended 3.5-m high finesse Fabry-Perot cavity, (2) Ellipsometer using ultra-high extinction-ratio polarizer and analyzer, and (3) Magnetic Field Modulation System for generating the birefringence and the polarization rotation effect. In 2002, the Q & A experiment achieved the Phase I sensitivity goal. During Phase II, we set (i) to improve the control system of the cavity mirrors for suppressing the relative motion noise, (ii) to enhance the birefringence signal by setting-up a 60-cm long 2.3 T transverse permanent magnet rotatable to 10 rev/s, (iii) to reduce geometrical noise by inserting a polarization-maintaining optical fiber (PM fiber) as a mode cleaner, and (iv) to use ultra-high extinction-ratio (10^{-9}) polarizer and analyzer for ellipsometry. Here we report on (iii) & (iv); specifically, we present the properties of the PM-fiber mode-cleaner, the transfer function of its suspension system, and the result of our measurement of high extinction-ratio polarizer and analyzer.
△ Less
Submitted 25 January, 2006; v1 submitted 21 August, 2005;
originally announced August 2005.