-
High-Efficiency Low-Noise Optomechanical Crystal Photon-Phonon Transducers
Authors:
Sameer Sonar,
Utku Hatipoglu,
Srujan Meesala,
David Lake,
Hengjiang Ren,
Oskar Painter
Abstract:
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address…
▽ More
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1 $\pm$ 0.8% at an added noise of 0.25 $\pm$ 0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically-controlled quantum acoustic memories.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Quantum entanglement between optical and microwave photonic qubits
Authors:
Srujan Meesala,
David Lake,
Steven Wood,
Piero Chiappina,
Changchun Zhong,
Andrew D. Beyer,
Matthew D. Shaw,
Liang Jiang,
Oskar Painter
Abstract:
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled…
▽ More
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled optical and microwave photonic qubits. Our device platform integrates a piezo-optomechanical transducer with a superconducting resonator which is robust under optical illumination. We drive a photon-pair generation process and employ a dual-rail encoding intrinsic to our system to prepare entangled states of microwave and optical photons. We place a lower bound on the fidelity of the entangled state by measuring microwave and optical photons in two orthogonal bases. This entanglement source can directly interface telecom wavelength time-bin qubits and GHz frequency superconducting qubits, two well-established platforms for quantum communication and computation, respectively.
△ Less
Submitted 22 December, 2023; v1 submitted 20 December, 2023;
originally announced December 2023.
-
In-situ tuning of optomechanical crystals with nano-oxidation
Authors:
Utku Hatipoglu,
Sameer Sonar,
David P. Lake,
Srujan Meesala,
Oskar Painter
Abstract:
Optomechanical crystals are a promising device platform for quantum transduction and sensing. Precise targeting of the optical and acoustic resonance frequencies of these devices is crucial for future advances on these fronts. However, fabrication disorder in these wavelength-scale nanoscale devices typically leads to inhomogeneous resonance frequencies. Here we achieve in-situ, selective frequenc…
▽ More
Optomechanical crystals are a promising device platform for quantum transduction and sensing. Precise targeting of the optical and acoustic resonance frequencies of these devices is crucial for future advances on these fronts. However, fabrication disorder in these wavelength-scale nanoscale devices typically leads to inhomogeneous resonance frequencies. Here we achieve in-situ, selective frequency tuning of optical and acoustic resonances in silicon optomechanical crystals via electric field-induced nano-oxidation using an atomic-force microscope. Our method can achieve a tuning range >2 nm (0.13%) for the optical resonance wavelength in the telecom C-band, and >60 MHz (1.2%) for the acoustic resonance frequency at 5 GHz. The tuning resolution of 1.1 nm for the optical wavelength, and $150$ kHz for the acoustic frequency allows us to spectrally align multiple optomechanical crystal resonators using optimal oxidation patterns determined via an inverse design protocol. Our results establish a method for precise post-fabrication tuning of optomechancical crystals. This technique can enable coupled optomechanical resonator arrays, scalable resonant optomechanical circuits, and frequency matching of microwave-optical quantum transducers.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
High Q-factor diamond optomechanical resonators with silicon vacancy centers at millikelvin temperatures
Authors:
Graham D. Joe,
Cleaven Chia,
Benjamin **ault,
Michael Haas,
Michelle Chalupnik,
Eliza Cornell,
Kazuhiro Kuruma,
Bartholomeus Machielse,
Neil Sinclair,
Srujan Meesala,
Marko Lončar
Abstract:
Phonons are envisioned as coherent intermediaries between different types of quantum systems. Engineered nanoscale devices such as optomechanical crystals (OMCs) provide a platform to utilize phonons as quantum information carriers. Here we demonstrate OMCs in diamond designed for strong interactions between phonons and a silicon vacancy (SiV) spin. Using optical measurements at millikelvin temper…
▽ More
Phonons are envisioned as coherent intermediaries between different types of quantum systems. Engineered nanoscale devices such as optomechanical crystals (OMCs) provide a platform to utilize phonons as quantum information carriers. Here we demonstrate OMCs in diamond designed for strong interactions between phonons and a silicon vacancy (SiV) spin. Using optical measurements at millikelvin temperatures, we measure a linewidth of 13 kHz (Q-factor of ~440,000) for 6 GHz acoustic modes, a record for diamond in the GHz frequency range and within an order of magnitude of state-of-the-art linewidths for OMCs in silicon. We investigate SiV optical and spin properties in these devices and outline a path towards a coherent spin-phonon interface.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope
Authors:
Matthew J. Turner,
Nicholas Langellier,
Rachel Bainbridge,
Dan Walters,
Srujan Meesala,
Thomas M. Babinec,
Pauli Kehayias,
Amir Yacoby,
Evelyn Hu,
Marko Lončar,
Ronald L. Walsworth,
Edlyn V. Levine
Abstract:
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution…
▽ More
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution, wide field-of-view, vector magnetic field imaging of static (DC) magnetic field emanations from an IC in different active states using a Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) quantum defects near the surface of a transparent diamond substrate placed on the IC to image magnetic fields. We show that QDM imaging achieves simultaneous $\sim10$ $μ$m resolution of all three vector magnetic field components over the 3.7 mm $\times$ 3.7 mm field-of-view of the diamond. We study activity arising from spatially-dependent current flow in both intact and decapsulated field-programmable gate arrays (FPGAs); and find that QDM images can determine pre-programmed IC active states with high fidelity using machine-learning classification methods.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Diamond Mirrors for High-Power Lasers
Authors:
H. Atikian,
N. Sinclair,
P. Latawiec,
X. Xiong,
S. Meesala,
S. Gauthier,
D. Wintz,
J. Randi,
D. Bernot,
S. DeFrances,
J. Thomas,
M. Roman,
S. Durrant,
F. Capasso,
M. Loncar
Abstract:
High-power lasers have numerous scientific and industrial applications. Some key areas include laser cutting and welding in manufacturing, directed energy in fusion reactors or defense applications, laser surgery in medicine, and advanced photolithography in the semiconductor industry. These applications require optical components, in particular mirrors, that withstand high optical powers for dire…
▽ More
High-power lasers have numerous scientific and industrial applications. Some key areas include laser cutting and welding in manufacturing, directed energy in fusion reactors or defense applications, laser surgery in medicine, and advanced photolithography in the semiconductor industry. These applications require optical components, in particular mirrors, that withstand high optical powers for directing light from the laser to the target. Ordinarily, mirrors are comprised of multilayer coatings of different refractive index and thickness. At high powers, imperfections in these layers lead to absorption of light, resulting in thermal stress and permanent damage to the mirror. Here we design, simulate, fabricate, and demonstrate monolithic and highly reflective dielectric mirrors which operate under high laser powers without damage. The mirrors are realized by etching nanostructures into the surface of single-crystal diamond, a material with exceptional optical and thermal properties. We measure reflectivities of greater than 98% and demonstrate damage-free operation using 10 kW of continuous-wave laser light at 1070 nm, with intensities up to 4.6 MW/cm2. In contrast, at these laser powers, we observe damage to a standard dielectric mirror based on optical coatings. Our results initiate a new category of broadband optics that operate in extreme conditions.
△ Less
Submitted 2 March, 2021; v1 submitted 13 September, 2019;
originally announced September 2019.
-
Quantum interference of electromechanically stabilized emitters in nanophotonic devices
Authors:
Bartholomeus Machielse,
Stefan Bogdanovic,
Srujan Meesala,
Scarlett Gauthier,
Michael J. Burek,
Graham Joe,
Michelle Chalupnik,
Young-Ik Sohn,
Jeffrey Holzgrafe,
Ruffin E. Evans,
Cleaven Chia,
Haig Atikian,
Mihir K. Bhaskar,
Denis D. Sukachev,
Linbo Shao,
Smarak Maity,
Mikhail D. Lukin,
Marko Lončar
Abstract:
Photon-mediated coupling between distant matter qubits may enable secure communication over long distances, the implementation of distributed quantum computing schemes, and the exploration of new regimes of many-body quantum dynamics. Nanophotonic devices coupled to solid-state quantum emitters represent a promising approach towards realization of these goals, as they combine strong light-matter i…
▽ More
Photon-mediated coupling between distant matter qubits may enable secure communication over long distances, the implementation of distributed quantum computing schemes, and the exploration of new regimes of many-body quantum dynamics. Nanophotonic devices coupled to solid-state quantum emitters represent a promising approach towards realization of these goals, as they combine strong light-matter interaction and high photon collection efficiencies. However, the scalability of these approaches is limited by the frequency mismatch between solid-state emitters and the instability of their optical transitions. Here we present a nano-electromechanical platform for stabilization and tuning of optical transitions of silicon-vacancy (SiV) color centers in diamond nanophotonic devices by dynamically controlling their strain environments. This strain-based tuning scheme has sufficient range and bandwidth to alleviate the spectral mismatch between individual SiV centers. Using strain, we ensure overlap between color center optical transitions and observe an entangled superradiant state by measuring correlations of photons collected from the diamond waveguide. This platform for tuning spectrally stable color centers in nanophotonic waveguides and resonators constitutes an important step towards a scalable quantum network.
△ Less
Submitted 22 February, 2019; v1 submitted 25 January, 2019;
originally announced January 2019.
-
A fiber-coupled diamond quantum nanophotonic interface
Authors:
Michael J. Burek,
Charles Meuwly,
Ruffin E. Evans,
Mihir K. Bhaskar,
Alp Sipahigil,
Srujan Meesala,
Denis D. Sukachev,
Christian T. Nguyen,
Jose L. Pacheco,
Edward Bielejec,
Mikhail D. Lukin,
Marko Lončar
Abstract:
Color centers in diamond provide a promising platform for quantum optics in the solid state, with coherent optical transitions and long-lived electron and nuclear spins. Building upon recent demonstrations of nanophotonic waveguides and optical cavities in single-crystal diamond, we now demonstrate on-chip diamond nanophotonics with a high efficiency fiber-optical interface, achieving > 90% power…
▽ More
Color centers in diamond provide a promising platform for quantum optics in the solid state, with coherent optical transitions and long-lived electron and nuclear spins. Building upon recent demonstrations of nanophotonic waveguides and optical cavities in single-crystal diamond, we now demonstrate on-chip diamond nanophotonics with a high efficiency fiber-optical interface, achieving > 90% power coupling at visible wavelengths. We use this approach to demonstrate a bright source of narrowband single photons, based on a silicon-vacancy color center embedded within a waveguide-coupled diamond photonic crystal cavity. Our fiber-coupled diamond quantum nanophotonic interface results in a high flux of coherent single photons into a single mode fiber, enabling new possibilities for realizing quantum networks that interface multiple emitters, both on-chip and separated by long distances.
△ Less
Submitted 29 March, 2017; v1 submitted 15 December, 2016;
originally announced December 2016.
-
Diamond optomechanical crystals
Authors:
Michael J. Burek,
Justin D. Cohen,
Seán M. Meenehan,
Nayera El-Sawah,
Cleaven Chia,
Thibaud Ruelle,
Srujan Meesala,
Jake Rochman,
Haig A. Atikian,
Matthew Markham,
Daniel J. Twitchen,
Mikhail D. Lukin,
Oskar Painter,
Marko Lončar
Abstract:
Cavity-optomechanical systems realized in single-crystal diamond are poised to benefit from its extraordinary material properties, including low mechanical dissipation and a wide optical transparency window. Diamond is also rich in optically active defects, such as the nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers, which behave as atom-like systems in the solid state. Predictions and obs…
▽ More
Cavity-optomechanical systems realized in single-crystal diamond are poised to benefit from its extraordinary material properties, including low mechanical dissipation and a wide optical transparency window. Diamond is also rich in optically active defects, such as the nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers, which behave as atom-like systems in the solid state. Predictions and observations of coherent coupling of the NV electronic spin to phonons via lattice strain has motivated the development of diamond nanomechanical devices aimed at realization of hybrid quantum systems, in which phonons provide an interface with diamond spins. In this work, we demonstrate diamond optomechanical crystals (OMCs), a device platform to enable such applications, wherein the co-localization of ~ 200 THz photons and few to 10 GHz phonons in a quasi-periodic diamond nanostructure leads to coupling of an optical cavity field to a mechanical mode via radiation pressure. In contrast to other material systems, diamond OMCs operating in the resolved-sideband regime possess large intracavity photon capacity (> 10$^5$) and sufficient optomechanical coupling rates to reach a cooperativity of ~ 20 at room temperature, allowing for the observation of optomechanically induced transparency and the realization of large amplitude optomechanical self-oscillations.
△ Less
Submitted 6 September, 2016; v1 submitted 13 December, 2015;
originally announced December 2015.
-
High-Q optical nanocavities in bulk single-crystal diamond
Authors:
Michael J. Burek,
Yiwen Chu,
Madelaine S. Z. Liddy,
Parth Patel,
Jake Rochman,
Srujan Meesala,
Wooyoung Hong,
Qimin Quan,
Mikhail D. Lukin,
Marko Lončar
Abstract:
Single-crystal diamond, with its unique optical, mechanical and thermal properties, has emerged as a promising material with applications in classical and quantum optics. However, the lack of heteroepitaxial growth and scalable fabrication techniques remain major limiting factors preventing more wide-spread development and application of diamond photonics. In this work, we overcome this difficulty…
▽ More
Single-crystal diamond, with its unique optical, mechanical and thermal properties, has emerged as a promising material with applications in classical and quantum optics. However, the lack of heteroepitaxial growth and scalable fabrication techniques remain major limiting factors preventing more wide-spread development and application of diamond photonics. In this work, we overcome this difficulty by adapting angled-etching techniques, previously developed for realization of diamond nanomechanical resonators, to fabricate racetrack resonators and photonic crystal cavities in bulk single-crystal diamond. Our devices feature large optical quality factors, in excess of 10^5, and operate over a wide wavelength range, spanning visible and telecom. These newly developed high-Q diamond optical nanocavities open the door for a wealth of applications, ranging from nonlinear optics and chemical sensing, to quantum information processing and cavity optomechanics.
△ Less
Submitted 25 August, 2014;
originally announced August 2014.