-
Modeling of liquid metal droplet deformation by laser impact
Authors:
I. Yu. Vichev,
D. A. Kim,
V. V. Medvedev
Abstract:
The method of sequential simulation of liquid metal droplet deformation by a laser pulse is considered. The first stage is the laser impact on a droplet. It was simulated using RALEF-2D code, based on the radiative gas dynamic model. The next stage is target deformation from a droplet to a disk. This part of simulation was carried out using OpenFOAM code where surface tension forces are taken into…
▽ More
The method of sequential simulation of liquid metal droplet deformation by a laser pulse is considered. The first stage is the laser impact on a droplet. It was simulated using RALEF-2D code, based on the radiative gas dynamic model. The next stage is target deformation from a droplet to a disk. This part of simulation was carried out using OpenFOAM code where surface tension forces are taken into account. Good agreement with experimental results was obtained.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Jet effusion from a metal droplet irradiated by a polarized ultrashort laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
P. M. Solyankin,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
C. -D. Ohl,
A. P. Shkurinov,
V. V. Medvedev
Abstract:
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orienta…
▽ More
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orientation is tied with polarization plane, rotation of which causes rotation of the cruciform jets by the same angle. To shed light on the experimental data we performed molecular dynamics simulation of droplet expansion induced by angle-dependent heating.
Our simulation shows that the jet directions are determined by an oriented angle-dependent energy distribution within a frontal hemisphere layer of droplet after absorption of linearly polarized light. As a result, the produced flow velocity field guided by surface tension forms two high-speed opposite jets oriented across the electric field vector as in our experiment.
A shock-wave pulse generated in the frontal layer has angle-dependent amplitude inherited from the oriented energy deposition. The release part of shock pulse produces a cavitation zone nearby the droplet center, and thus an expanding spherical shell is formed from the droplet. The flow velocities within a rearside hemisphere of the shell, produced after reflection of the shock wave from the rear side of droplet, generate two low-speed opposite jets oriented along the electric field vector. Thus we found that the cruciform jets are originated independently from the frontal and rear sides of droplet, and a pair of frontal jets is faster than a pair of rearside jets.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
An epsilon-near-zero-based Dallenbach absorber
Authors:
Viacheslav V. Medvedev
Abstract:
We report a theoretical analysis of total absorption conditions in a structure consisting of a lossy coating layer on top of a specular metal substrate, which is known as a Dallenbach absorber. All possible combinations of complex refractive indices of the coating material and thicknesses of the coating layer providing complete absorption are described for the case of normal incidence of a plane w…
▽ More
We report a theoretical analysis of total absorption conditions in a structure consisting of a lossy coating layer on top of a specular metal substrate, which is known as a Dallenbach absorber. All possible combinations of complex refractive indices of the coating material and thicknesses of the coating layer providing complete absorption are described for the case of normal incidence of a plane wave. The work of coatings based on epsilon-near-zero (ENZ) materials is analyzed in detail. Simple analytical relations are obtained for the conditions of total absorption. It is shown that the range of angles where strong absorption occurs is limited by the phenomenon of total external reflection. The characteristics of coatings based on indium-tin oxide, which is an example of an ENZ material, are analyzed.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Particle lofting from substrate exposed to plasma and electron beam
Authors:
P. V. Krainov,
V. V. Ivanov,
D. I. Astakhov,
V. V. Medvedev,
V. V. Kvon,
A. M. Yakunin,
M. A. van de Kerkhof
Abstract:
A nanometer-sized dielectric particle lying on a dielectric substrate is exposed to the flux of low-energy electrons, ion and electron fluxes from a cold plasma and the fluxes from the combination of these two sources with the help of particle-in-cell simulation to investigate the particle lofting phenomenon. The results are of interest for dust mitigation in the semiconductor industry, the lunar…
▽ More
A nanometer-sized dielectric particle lying on a dielectric substrate is exposed to the flux of low-energy electrons, ion and electron fluxes from a cold plasma and the fluxes from the combination of these two sources with the help of particle-in-cell simulation to investigate the particle lofting phenomenon. The results are of interest for dust mitigation in the semiconductor industry, the lunar exploration, and the explanation of the dust levitation.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Dielectric particle lofting from dielectric substrate exposed to low energy electron beam
Authors:
P. V. Krainov,
V. V. Ivanov,
D. I. Astakhov,
M. A. van de Kerkhof,
V. V. Kvon,
V. V. Medvedev,
A. M. Yakunin
Abstract:
The particle-in-cell simulation is applied to study a nanometer-sized dielectric particle lofting from a dielectric substrate exposed to a low energy electron beam. The article discusses the electron accumulation between such a substrate and a particle lying on it, that can cause a particle lofting. The results are of interest for dust mitigation in the semiconductor industry, the lunar exploratio…
▽ More
The particle-in-cell simulation is applied to study a nanometer-sized dielectric particle lofting from a dielectric substrate exposed to a low energy electron beam. The article discusses the electron accumulation between such a substrate and a particle lying on it, that can cause a particle lofting. The results are of interest for dust mitigation in the semiconductor industry, the lunar exploration and the explanation of the dust levitation.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Expansion and fragmentation of liquid metal droplet by a short laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
D. K. Ilnitsky,
K. P. Migdal,
N. A. Inogamov,
A. Yu. Vinokhodov,
V. O. Kompanets,
Yu. V. Sidelnikov,
V. M. Krivtsun,
K. N. Koshelev,
V. V. Medvedev
Abstract:
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentati…
▽ More
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentation we perform simulation of liquid-tin droplet expansion produced by the initial conditions similar to those in experiment using the smoothed particle hydrodynamics (SPH) method. Simulation demonstrates that a thin heated surface layer generates a ultrashort shock wave propagating from the frontal side to rear side of the droplet. Convergence of such shock wave followed by a rarefaction tale to the droplet center results in the cavitation of material inside the central region by the strong tensile stress. Reflection of the shock wave from the rear side of droplet produces another region of highly stretched material where the spallation may occur producing a thin spallation layer moving with a velocity higher than expansion of the central shell after cavitation. It is shown both experimentally and numerically that the threshold laser intensity necessary for the spallation is higher than the threshold required to induce cavitation in the central region of droplet. Thus, the regime of asymmetrical expansion is realized if the laser intensity exceeds the spallation threshold. The transverse and longitudinal expansion velocities obtained in SPH simulations of different regimes of expansion are agreed well with our experimental data.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Droplet deformation and fragmentation by ultra-short laser pulses
Authors:
M. S. Krivokorytov,
A. Yu. Vinokhodov,
Yu. V. Sidelnikov,
V. M. Krivtsun,
V. V. Medvedev,
V. O. Kompanets,
A. A. Lash,
K. N. Koshelev
Abstract:
We report on the experimental studies of the deformation and fragmentation of liquid metal droplets by picosecond and subpicosecond laser pulses. The experiments were performed with laser irradiance varying in 10E13-10E15 W/cm^2 range. The observed evolution of the droplet shape upon the impact dramatically differs from the previously reported for nanosecond laser pulses. Instead of flattening the…
▽ More
We report on the experimental studies of the deformation and fragmentation of liquid metal droplets by picosecond and subpicosecond laser pulses. The experiments were performed with laser irradiance varying in 10E13-10E15 W/cm^2 range. The observed evolution of the droplet shape upon the impact dramatically differs from the previously reported for nanosecond laser pulses. Instead of flattening the droplet undergoes rapid asymmetric expansion and transforms into a complex shape which can be interpreted as two conjunct spheroid shells and finally fragments. We explain the described hydrodynamic response to the ultra-short impact as a result of the propagation of the laser-induced convergent shockwave through the volume of droplet.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
