-
Scaling on-chip photonic neural processors using arbitrarily programmable wave propagation
Authors:
Tatsuhiro Onodera,
Martin M. Stein,
Benjamin A. Ash,
Mandar M. Sohoni,
Melissa Bosch,
Ryotatsu Yanagimoto,
Marc Jankowski,
Timothy P. McKenna,
Tianyu Wang,
Gennady Shvets,
Maxim R. Shcherbakov,
Logan G. Wright,
Peter L. McMahon
Abstract:
On-chip photonic processors for neural networks have potential benefits in both speed and energy efficiency but have not yet reached the scale at which they can outperform electronic processors. The dominant paradigm for designing on-chip photonics is to make networks of relatively bulky discrete components connected by one-dimensional waveguides. A far more compact alternative is to avoid explici…
▽ More
On-chip photonic processors for neural networks have potential benefits in both speed and energy efficiency but have not yet reached the scale at which they can outperform electronic processors. The dominant paradigm for designing on-chip photonics is to make networks of relatively bulky discrete components connected by one-dimensional waveguides. A far more compact alternative is to avoid explicitly defining any components and instead sculpt the continuous substrate of the photonic processor to directly perform the computation using waves freely propagating in two dimensions. We propose and demonstrate a device whose refractive index as a function of space, $n(x,z)$, can be rapidly reprogrammed, allowing arbitrary control over the wave propagation in the device. Our device, a 2D-programmable waveguide, combines photoconductive gain with the electro-optic effect to achieve massively parallel modulation of the refractive index of a slab waveguide, with an index modulation depth of $10^{-3}$ and approximately $10^4$ programmable degrees of freedom. We used a prototype device with a functional area of $12\,\text{mm}^2$ to perform neural-network inference with up to 49-dimensional input vectors in a single pass, achieving 96% accuracy on vowel classification and 86% accuracy on $7 \times 7$-pixel MNIST handwritten-digit classification. This is a scale beyond that of previous photonic chips relying on discrete components, illustrating the benefit of the continuous-waves paradigm. In principle, with large enough chip area, the reprogrammability of the device's refractive index distribution enables the reconfigurable realization of any passive, linear photonic circuit or device. This promises the development of more compact and versatile photonic systems for a wide range of applications, including optical processing, smart sensing, spectroscopy, and optical communications.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Ultrafast second-order nonlinear photonics -- from classical physics to non-Gaussian quantum dynamics
Authors:
Marc Jankowski,
Ryotatsu Yanagimoto,
Edwin Ng,
Ryan Hamerly,
Timothy P. McKenna,
Hideo Mabuchi,
M. M. Fejer
Abstract:
Photonic integrated circuits with second-order ($χ^{(2)}$) nonlinearities are rapidly scaling to remarkably low powers. At this time, state-of-the-art devices achieve saturated nonlinear interactions with thousands of photons when driven by continuous-wave lasers, and further reductions in these energy requirements enabled by the use of ultrafast pulses may soon push nonlinear optics into the real…
▽ More
Photonic integrated circuits with second-order ($χ^{(2)}$) nonlinearities are rapidly scaling to remarkably low powers. At this time, state-of-the-art devices achieve saturated nonlinear interactions with thousands of photons when driven by continuous-wave lasers, and further reductions in these energy requirements enabled by the use of ultrafast pulses may soon push nonlinear optics into the realm of single-photon nonlinearities. This tutorial reviews these recent developments in ultrafast nonlinear photonics, discusses design strategies for realizing few-photon nonlinear interactions, and presents a unified treatment of ultrafast quantum nonlinear optics using a framework that smoothly interpolates from classical behaviors to the few-photon scale. These emerging platforms for quantum optics fundamentally differ from typical realizations in cavity quantum electrodynamics due to the large number of coupled optical modes. Classically, multimode behaviors have been well studied in nonlinear optics, with famous examples including soliton formation and supercontinuum generation. In contrast, multimode quantum systems exhibit a far greater variety of behaviors, and yet closed-form solutions are even sparser than their classical counterparts. In develo** a framework for ultrafast quantum optics, we will identify what behaviors carry over from classical to quantum devices, what intuition must be abandoned, and what new opportunities exist at the intersection of ultrafast and quantum nonlinear optics. While this article focuses on establishing connections between the classical and quantum behaviors of devices with $χ^{(2)}$ nonlinearities, the frameworks developed here are general and are readily extended to the description of dynamical processes based on third-order ($χ^{(3)}$) nonlinearities.
△ Less
Submitted 17 January, 2024; v1 submitted 11 January, 2024;
originally announced January 2024.
-
Mesoscopic ultrafast nonlinear optics -- The emergence of multimode quantum non-Gaussian physics
Authors:
Ryotatsu Yanagimoto,
Edwin Ng,
Marc Jankowski,
Rajveer Nehra,
Timothy P. McKenna,
Tatsuhiro Onodera,
Logan G. Wright,
Ryan Hamerly,
Alireza Marandi,
M. M. Fejer,
Hideo Mabuchi
Abstract:
Over the last few decades, nonlinear optics has become significantly more nonlinear, traversing nearly a billionfold improvement in energy efficiency, with ultrafast nonlinear nanophotonics in particular emerging as a frontier for combining both spatial and temporal engineering. At present, cutting-edge experiments in nonlinear nanophotonics place us just above the mesoscopic regime, where a few h…
▽ More
Over the last few decades, nonlinear optics has become significantly more nonlinear, traversing nearly a billionfold improvement in energy efficiency, with ultrafast nonlinear nanophotonics in particular emerging as a frontier for combining both spatial and temporal engineering. At present, cutting-edge experiments in nonlinear nanophotonics place us just above the mesoscopic regime, where a few hundred photons suffice to trigger nonlinear saturation. In contrast to classical or deep-quantum optics, the mesoscale is characterized by dynamical interactions between mean-field, Gaussian, and non-Gaussian quantum features, all within a close hierarchy of scales. When combined with the inherent multimode complexity of optical fields, such hybrid quantum-classical dynamics present theoretical, experimental, and engineering challenges to the contemporary framework of quantum optics. In this review, we highlight the unique physics that emerges in multimode nonlinear optics at the mesoscale and outline key principles for exploiting both classical and quantum features to engineer novel functionalities. We briefly survey the experimental landscape and draw attention to outstanding technical challenges in materials, dispersion engineering, and device design for accessing mesoscopic operation. Finally, we speculate on how these capabilities might usher in some new paradigms in quantum photonics, from quantum-augmented information processing to nonclassical-light-driven dynamics and phenomena to all-optical non-Gaussian measurement and sensing. The physics unlocked at the mesoscale present significant challenges and opportunities in theory and experiment alike, and this review is intended to serve as a guidepost as we begin to navigate this new frontier in ultrafast quantum nonlinear optics.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion
Authors:
James C. Blakesley,
Ruy S. Bonilla,
Marina Freitag,
Alex M. Ganose,
Nicola Gasparini,
Pascal Kaienburg,
George Koutsourakis,
Jonathan D. Major,
Jenny Nelson,
Nakita K. Noel,
Bart Roose,
Jae Sung Yun,
Simon Aliwell,
Pietro P. Altermatt,
Tayebeh Ameri,
Virgil Andrei,
Ardalan Armin,
Diego Bagnis,
Jenny Baker,
Hamish Beath,
Mathieu Bellanger,
Philippe Berrouard,
Jochen Blumberger,
Stuart A. Boden,
Hugo Bronstein
, et al. (61 additional authors not shown)
Abstract:
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.…
▽ More
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators
Authors:
Jason F. Herrmann,
Devin J. Dean,
Christopher J. Sarabalis,
Vahid Ansari,
Kevin Multani,
E. Alex Wollack,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over reso…
▽ More
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to $\sim50\times$ tuning in the bandwidth over $\sim50$ V with linear frequency control of $\sim230$ MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Mid-infrared spectroscopy with a broadly tunable thin-film lithium niobate optical parametric oscillator
Authors:
Alexander Y. Hwang,
Hubert S. Stokowski,
Taewon Park,
Marc Jankowski,
Timothy P. McKenna,
Carsten Langrock,
Jatadhari Mishra,
Vahid Ansari,
Martin M. Fejer,
Amir H. Safavi-Naeini
Abstract:
Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encountered barriers stemming from sources either limited in tuning range or excessively bulky for practical field use. We present a compact, efficient, and broadly tunable optical parametric oscillator (OPO) device surmounting these challenges. Leveraging a dispersion-engineered singly-resonant OPO impleme…
▽ More
Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encountered barriers stemming from sources either limited in tuning range or excessively bulky for practical field use. We present a compact, efficient, and broadly tunable optical parametric oscillator (OPO) device surmounting these challenges. Leveraging a dispersion-engineered singly-resonant OPO implemented in thin-film lithium niobate-on-sapphire, we achieve broad and controlled tuning over an octave, from 1.5 to 3.3 microns by combining laser and temperature tuning. The device generates > 25 mW of mid-infrared light at 3.2 microns, offering a power conversion efficiency of 15% (45% quantum efficiency). We demonstrate the tuning and performance of the device by successfully measuring the spectra of methane and ammonia, verifying our approach's relevance for gas sensing. Our device signifies an important advance in nonlinear photonics miniaturization and brings practical field applications of high-speed and broadband mid-infrared spectroscopy closer to reality.
△ Less
Submitted 9 July, 2023;
originally announced July 2023.
-
Surface Modification and Coherence in Lithium Niobate SAW Resonators
Authors:
Rachel G. Gruenke,
Oliver A. Hitchcock,
E. Alex Wollack,
Christopher J. Sarabalis,
Marc Jankowski,
Timothy P. McKenna,
Nathan R. Lee,
Amir H. Safavi-Naeini
Abstract:
Lithium niobate is a promising material for develo** quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device p…
▽ More
Lithium niobate is a promising material for develo** quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, x-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Laser harmonic generation with tuneable orbital angular momentum using a structured plasma target
Authors:
R. M. G. M. Trines,
H. Schmitz,
M. King,
P. McKenna,
R. Bingham
Abstract:
In previous studies of spin-to-orbital angular momentum (AM) conversion in laser high harmonic generation (HHG) using a plasma target, one unit of spin AM is always converted into precisely one unit of OAM [1, 2]. Here we show, through analytic theory and numerical simulations, that we can exchange one unit of SAM for a tuneable amount of OAM per harmonic step, via the use of a structured plasma t…
▽ More
In previous studies of spin-to-orbital angular momentum (AM) conversion in laser high harmonic generation (HHG) using a plasma target, one unit of spin AM is always converted into precisely one unit of OAM [1, 2]. Here we show, through analytic theory and numerical simulations, that we can exchange one unit of SAM for a tuneable amount of OAM per harmonic step, via the use of a structured plasma target. In the process, we introduce a novel framework to study laser harmonic generation via recasting it as a beat wave process. This framework enables us to easily calculate and visualise harmonic progressions, unify the "photon counting" and "symmetry-based" approaches to HHG and provide new explanations for existing HHG results. Our framework also includes a specific way to analyse simultaneously the frequency, spin and OAM content of the harmonic radiation which provides enhanced insight into this process. The prospects of using our new framework to design HHG configurations with tuneable high-order transverse modes, also covering the design of structured plasma targets, will be discussed.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Automated control and optimisation of laser driven ion acceleration
Authors:
B. Loughran,
M. J. V. Streeter,
H. Ahmed,
S. Astbury,
M. Balcazar,
M. Borghesi,
N. Bourgeois,
C. B. Curry,
S. J. D. Dann,
S. DiIorio,
N. P. Dover,
T. Dzelzanis,
O. C. Ettlinger,
M. Gauthier,
L. Giuffrida,
G. D. Glenn,
S. H. Glenzer,
J. S. Green,
R. J. Gray,
G. S. Hicks,
C. Hyland,
V. Istokskaia,
M. King,
D. Margarone,
O. McCusker
, et al. (10 additional authors not shown)
Abstract:
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by ma…
▽ More
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimisation. Here, an automated, HRR-compatible system produced high fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimisation of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually-optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimisation of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Integrated Quantum Optical Phase Sensor
Authors:
Hubert S. Stokowski,
Timothy P. McKenna,
Taewon Park,
Alexander Y. Hwang,
Devin J. Dean,
Oguz Tolga Celik,
Vahid Ansari,
Martin M. Fejer,
Amir H. Safavi-Naeini
Abstract:
The quantum noise of light fundamentally limits optical phase sensors. A semiclassical picture attributes this noise to the random arrival time of photons from a coherent light source such as a laser. An engineered source of squeezed states suppresses this noise and allows sensitivity beyond the standard quantum limit (SQL) for phase detection. Advanced gravitational wave detectors like LIGO have…
▽ More
The quantum noise of light fundamentally limits optical phase sensors. A semiclassical picture attributes this noise to the random arrival time of photons from a coherent light source such as a laser. An engineered source of squeezed states suppresses this noise and allows sensitivity beyond the standard quantum limit (SQL) for phase detection. Advanced gravitational wave detectors like LIGO have already incorporated such sources, and nascent efforts in realizing quantum biological measurements have provided glimpses into new capabilities emerging in quantum measurement. We need ways to engineer and use quantum light within deployable quantum sensors that operate outside the confines of a lab environment. Here we present a photonic integrated circuit fabricated in thin-film lithium niobate that provides a path to meet these requirements. We use the second-order nonlinearity to produce a squeezed state at the same frequency as the pump light and realize circuit control and sensing with electro-optics. Using a 26.2 milliwatts of optical power, we measure (2.7 $\pm$ 0.2 )$\%$ squeezing and apply it to increase the signal-to-noise ratio of phase measurement. We anticipate that on-chip photonic systems like this, which operate with low power and integrate all of the needed functionality on a single die, will open new opportunities for quantum optical sensing.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Optically heralded microwave photons
Authors:
Wentao Jiang,
Felix M. Mayor,
Sultan Malik,
Raphaël Van Laer,
Timothy P. McKenna,
Rishi N. Patel,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturall…
▽ More
A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturally on microwave photons that have roughly $40,000$ times less energy. To network these quantum machines across appreciable distances, we must bridge this frequency gap and learn how to generate entanglement across widely disparate parts of the electromagnetic spectrum. Here we implement and demonstrate a transducer device that can generate entanglement between optical and microwave photons, and use it to show that by detecting an optical photon we add a single photon to the microwave field. We achieve this by using a gigahertz nanomechanical resonance as an intermediary, and efficiently coupling it to optical and microwave channels through strong optomechanical and piezoelectric interactions. We show continuous operation of the transducer with $5\%$ frequency conversion efficiency, and pulsed microwave photon generation at a heralding rate of $15$ hertz. Optical absorption in the device generates thermal noise of less than two microwave photons. Joint measurements on optical photons from a pair of transducers would realize entanglement generation between distant microwave-frequency quantum nodes. Improvements of the system efficiency and device performance, necessary to realize a high rate of entanglement generation in such networks are within reach.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Optimizing laser coupling, matter heating, and particle acceleration from solids using multiplexed ultraintense lasers
Authors:
Weipeng Yao,
Motoaki Nakatsutsumi,
Sébastien Buffechoux,
Patrizio Antici,
Macro Borghesi,
Andrea Ciardi,
Sophia N. Chen,
Emmanuel d'Humières,
Laurent Gremillet,
Robert Heathcote,
Vojtěch Horný,
Paul McKenna,
Mark N. Quinn,
Lorenzo Romagnani,
Ryan Royle,
Gianluca Sarri,
Yasuhiko Sentoku,
Hans-Peter Schlenvoigt,
Toma Toncian,
Olivier Tresca,
Laura Vassura,
Oswald Willi,
Julien Fuchs
Abstract:
Realizing the full potential of ultrahigh-intensity lasers for particle and radiation generation will require multi-beam arrangements due to technology limitations. Here, we investigate how to optimize their coupling with solid targets. Experimentally, we show that overlap** two intense lasers in a mirror-like configuration onto a solid with a large preplasma can greatly improve the generation o…
▽ More
Realizing the full potential of ultrahigh-intensity lasers for particle and radiation generation will require multi-beam arrangements due to technology limitations. Here, we investigate how to optimize their coupling with solid targets. Experimentally, we show that overlap** two intense lasers in a mirror-like configuration onto a solid with a large preplasma can greatly improve the generation of hot electrons at the target front and ion acceleration at the target backside. The underlying mechanisms are analyzed through multidimensional particle-in-cell simulations, revealing that the self-induced magnetic fields driven by the two laser beams at the target front are susceptible to reconnection, which is one possible mechanism to boost electron energization. In addition, the resistive magnetic field generated during the transport of the hot electrons in the target bulk tends to improve their collimation. Our simulations also indicate that such effects can be further enhanced by overlap** more than two laser beams.
△ Less
Submitted 23 February, 2024; v1 submitted 12 August, 2022;
originally announced August 2022.
-
Bunched proton acceleration from a laser-irradiated cone target
Authors:
Xing-Long Zhu,
Wei-Yuan Liu,
Min Chen,
Su-Ming Weng,
Paul McKenna,
Zheng-Ming Sheng,
Jie Zhang
Abstract:
Laser-driven ion acceleration is an attractive technique for compact high-energy ion sources. Currently, among various physical and technical issues to be solved, the boost of ion energy and the reduction of energy spread represent the key challenges with this technique. Here we present a scheme to tackle these challenges by using a hundred-terawatt-class laser pulse irradiating a cone target. Thr…
▽ More
Laser-driven ion acceleration is an attractive technique for compact high-energy ion sources. Currently, among various physical and technical issues to be solved, the boost of ion energy and the reduction of energy spread represent the key challenges with this technique. Here we present a scheme to tackle these challenges by using a hundred-terawatt-class laser pulse irradiating a cone target. Three-dimensional particle-in-cell simulations show that a large number of electrons are dragged out of the cone walls and accelerated to hundreds of MeV by the laser fields inside the cone. When these energetic dense electron beams pass through the cone target tip into vacuum, a very high bunching acceleration field, up to tens of TV/m, quickly forms. Protons are accelerated and simultaneously bunched by this field, resulting in quasi-monoenergetic proton beams with hundred MeV energy and low energy spread of ~2%. Results exploring the scaling of the proton beam energy with laser and target parameters are presented, indicating that the scheme is robust. This opens a new route for compact high-energy proton sources from fundamental research to biomedical applications.
△ Less
Submitted 16 July, 2022;
originally announced July 2022.
-
Ultra-broadband mid-infrared generation in dispersion-engineered thin-film lithium niobate
Authors:
Jatadhari Mishra,
Marc Jankowski,
Alexander Y. Hwang,
Hubert S. Stokowski,
Timothy P. McKenna,
Carsten Langrock,
Edwin Ng,
David Heydari,
Hideo Mabuchi,
Amir H. Safavi-Naeini,
M . M. Fejer
Abstract:
Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between…
▽ More
Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between a fixed 1-micron pump and a tunable telecom source in uniformly-poled TFLN-on-sapphire by harnessing the dispersion-engineering available in tightly-confining waveguides. We show a simultaneous 1-2 order-of-magnitude improvement in conversion efficiency and ~5-fold enhancement of operating bandwidth for mid-infrared generation when compared to conventional lithium niobate waveguides. We also examine the effects of mid-infrared loss from surface-adsorbed water on the performance of these devices.
△ Less
Submitted 10 June, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
High-bandwidth CMOS-voltage-level electro-optic modulation of 780 nm light in thin-film lithium niobate
Authors:
Oguz Tolga Celik,
Christopher J. Sarabalis,
Felix M. Mayor,
Hubert S. Stokowski,
Jason F. Herrmann,
Timothy P. McKenna,
Nathan R. A. Lee,
Wentao Jiang,
Kevin K. S. Multani,
Amir H. Safavi-Naeini
Abstract:
Integrated photonics operating at visible-near-infrared (VNIR) wavelengths offer scalable platforms for advancing optical systems for addressing atomic clocks, sensors, and quantum computers. The complexity of free-space control optics causes limited addressability of atoms and ions, and this remains an impediment on scalability and cost. Networks of Mach-Zehnder interferometers can overcome chall…
▽ More
Integrated photonics operating at visible-near-infrared (VNIR) wavelengths offer scalable platforms for advancing optical systems for addressing atomic clocks, sensors, and quantum computers. The complexity of free-space control optics causes limited addressability of atoms and ions, and this remains an impediment on scalability and cost. Networks of Mach-Zehnder interferometers can overcome challenges in addressing atoms by providing high-bandwidth electro-optic control of multiple output beams. Here, we demonstrate a VNIR Mach-Zehnder interferometer on lithium niobate on sapphire with a CMOS voltage-level compatible full-swing voltage of 4.2 V and an electro-optic bandwidth of 2.7 GHz occupying only 0.35 mm$^2$. Our waveguides exhibit 1.6 dB/cm propagation loss and our microring resonators have intrinsic quality factors of 4.4 $\times$ 10$^5$. This specialized platform for VNIR integrated photonics can open new avenues for addressing large arrays of qubits with high precision and negligible cross-talk.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Calibration of BAS-TR image plate response to GeV gold ions
Authors:
D. Doria,
P. Martin,
H. Ahmed,
A. Alejo,
M. Cerchez,
S. Ferguson,
J. Fernandez-Tobias,
J. S. Green,
D. Gwynne,
F. Hanton,
J. Jarrett,
D. A. Maclellan,
A. McIlvenny,
P. McKenna,
J. A. Ruiz,
M. Swantusch,
O. Willi,
S. Zhai,
M. Borghesi,
S. Kar
Abstract:
The response of the BAS-TR image plate (IP) was absolutely calibrated using CR-39 track detector for high linear energy transfer (LET) Au ions up to $\sim$1.6 GeV (8.2 MeV/nucleon), accelerated by high-power lasers. The calibration was carried out by employing a high-resolution Thomson parabola spectrometer, which allowed resolving Au ions with closely spaced ionization states up to 58$^+$. A resp…
▽ More
The response of the BAS-TR image plate (IP) was absolutely calibrated using CR-39 track detector for high linear energy transfer (LET) Au ions up to $\sim$1.6 GeV (8.2 MeV/nucleon), accelerated by high-power lasers. The calibration was carried out by employing a high-resolution Thomson parabola spectrometer, which allowed resolving Au ions with closely spaced ionization states up to 58$^+$. A response function was obtained by fitting the photo-stimulated luminescence (PSL) per Au ion for different ion energies, which is broadly in agreement with that expected from ion stop** in the active layer of the IP. This calibration would allow quantifying the ion energy spectra for high energy Au ions, which is important for further investigation of the laser-based acceleration of heavy ion beams.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Laser Driven Nuclear physics at ELINP
Authors:
F. Negoita,
M. Roth,
P. G. Thirolf,
S. Tudisco,
F. Hannachi,
S. Moustaizis,
I. Pomerantz,
P. Mckenna,
J. Fuchs,
K. Sphor,
G. Acbas,
A. Anzalone,
P. Audebert,
S. Balascuta,
F. Cappuzzello,
M. O. Cernaianu,
S. Chen,
I. Dancus,
R. Freeman,
H. Geissel,
P. Ghenuche,
L. Gizzi,
F. Gobet,
G. Gosselin,
M. Gugiu
, et al. (31 additional authors not shown)
Abstract:
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Absolute keV X-ray yield and conversion efficiency in over dense Si petawatt laser plasma
Authors:
Sergey N. Ryazantsev,
Artem S. Martynenko,
Maksim V. Sedov,
Igor Yu. Skobelev,
Mikhail D. Mishchenko,
Yaroslav S. Lavrinenko,
Christopher D. Baird,
Nicola Booth,
Phil Durey,
Leonard N. K. DÖhl,
Damon Farley,
Kathryn L. Lancaster,
Paul Mckenna,
Christopher D. Murphy,
Tatiana A. Pikuz,
Christopher Spindloe,
Nigel Woolsey,
Sergey A. Pikuz
Abstract:
Laser-produced plasmas are bright, short sources of X-rays often used for time-resolved imaging and spectroscopy. Absolute measurement requires accurate knowledge of laser-to-x-ray conversion efficiencies, spectrum, photon yield and angular distribution. Here we report on soft X-ray emission from a thin Si foil irradiated by a sub-PW picosecond laser pulse. These absolute measurements cover a cont…
▽ More
Laser-produced plasmas are bright, short sources of X-rays often used for time-resolved imaging and spectroscopy. Absolute measurement requires accurate knowledge of laser-to-x-ray conversion efficiencies, spectrum, photon yield and angular distribution. Here we report on soft X-ray emission from a thin Si foil irradiated by a sub-PW picosecond laser pulse. These absolute measurements cover a continuous and broad spectral range that extends from 4.75 to 7.5 Angstroms (1.7-2.6 keV). The X-ray spectrum consists of spectral line transitions from highly charged ions and broadband emission with contributions from recombination, and free-free processes that occur as electrons decelerate in plasma electromagnetic fields. These quantitative measurements are compared to particle-in-cell simulations allowing us to distinguish bremsstrahlung and synchrotron contributions to the free-free emission. We found that experiment and simulation estimations of laser-to-bremsstrahlung conversion efficiency are in a good agreement. This agreement illustrates the accuracy of experiment and physical interpretation of the measurements.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
High efficiency second harmonic generation of blue light on thin film lithium niobate
Authors:
Taewon Park,
Hubert S. Stokowski,
Vahid Ansari,
Timothy P. McKenna,
Alexander Y. Hwang,
M. M. Fejer,
Amir H. Safavi-Naeini
Abstract:
We demonstrate second harmonic generation of blue light on an integrated thin-film lithium niobate waveguide and observe a conversion efficiency of $η_0= 33000\%/\text{W-cm}^2$, significantly exceeding previous demonstrations.
We demonstrate second harmonic generation of blue light on an integrated thin-film lithium niobate waveguide and observe a conversion efficiency of $η_0= 33000\%/\text{W-cm}^2$, significantly exceeding previous demonstrations.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Spectrally peaked proton beams shock accelerated from an optically shaped overdense gas jet by a near-infrared laser
Authors:
George S. Hicks,
Oliver C. Ettlinger,
Marco Borghesi,
David C. Carroll,
Robert J. Clarke,
Emma-Jane Ditter,
Timothy P. Frazer,
Ross J. Gray,
Aodhan McIlvenny,
Paul McKenna,
Charlotte A. J. Palmer,
Louise Willingale,
Zulfikar Najmudin
Abstract:
We report on the generation of impurity-free proton beams from an overdense gas jet driven by a near-infrared laser ($λ_L=1.053$ $\mathrmμ m$). The gas profile was shaped prior to the interaction using a controlled prepulse. Without this optical sha**, a 30$\pm$4 nCsr$^{-1}$ thermal spectrum was detected transversely to the laser propagation direction with a high energy 8.27$\pm$7 MeV, narrow en…
▽ More
We report on the generation of impurity-free proton beams from an overdense gas jet driven by a near-infrared laser ($λ_L=1.053$ $\mathrmμ m$). The gas profile was shaped prior to the interaction using a controlled prepulse. Without this optical sha**, a 30$\pm$4 nCsr$^{-1}$ thermal spectrum was detected transversely to the laser propagation direction with a high energy 8.27$\pm$7 MeV, narrow energy spread (6$\pm$2 %) bunch containing 45$\pm$7 pCsr$^{-1}$. In contrast, with optical sha** the radial component was not detected and instead forward going protons were detected with energy 1.32$\pm$2 MeV, 12.9$\pm$3 % energy spread, and charge 400$\pm$30 pCsr$^{-1}$. Both the forward going and radial narrow energy spread features are indicative of collisionless shock acceleration of the protons.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
Mid-infrared nonlinear optics in thin-film lithium niobate on sapphire
Authors:
Jatadhari Mishra,
Timothy P. McKenna,
Edwin Ng,
Hubert S. Stokowski,
Marc Jankowski,
Carsten Langrock,
David Heydari,
Hideo Mabuchi,
M. M. Fejer,
Amir H. Safavi-Naeini
Abstract:
Periodically poled thin-film lithium niobate (TFLN) waveguides have emerged as a leading platform for highly efficient frequency conversion in the near-infrared. However, the commonly used silica bottom-cladding results in high absorption loss at wavelengths beyond 2.5 $μ$m. In this work, we demonstrate efficient frequency conversion in a TFLN-on-sapphire platform, which features high transparency…
▽ More
Periodically poled thin-film lithium niobate (TFLN) waveguides have emerged as a leading platform for highly efficient frequency conversion in the near-infrared. However, the commonly used silica bottom-cladding results in high absorption loss at wavelengths beyond 2.5 $μ$m. In this work, we demonstrate efficient frequency conversion in a TFLN-on-sapphire platform, which features high transparency up to 4.5 $μ$m. In particular, we report generating mid-infrared light up to 3.66 $μ$m via difference-frequency generation of a fixed 1-$μ$m source and a tunable telecom source, with normalized efficiencies up to 200%/W-cm$^2$. These results show TFLN-on-sapphire to be a promising platform for integrated nonlinear nanophotonics in the mid-infrared.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Ultra-low-power second-order nonlinear optics on a chip
Authors:
Timothy P. McKenna,
Hubert S. Stokowski,
Vahid Ansari,
Jatadhari Mishra,
Marc Jankowski,
Christopher J. Sarabalis,
Jason F. Herrmann,
Carsten Langrock,
Martin M. Fejer,
Amir H. Safavi-Naeini
Abstract:
Second-order nonlinear optical processes are used to convert light from one wavelength to another and to generate quantum entanglement. Creating chip-scale devices to more efficiently realize and control these interactions greatly increases the reach of photonics. Optical crystals and guided wave devices made from lithium niobate and potassium titanyl phosphate are typically used to realize second…
▽ More
Second-order nonlinear optical processes are used to convert light from one wavelength to another and to generate quantum entanglement. Creating chip-scale devices to more efficiently realize and control these interactions greatly increases the reach of photonics. Optical crystals and guided wave devices made from lithium niobate and potassium titanyl phosphate are typically used to realize second-order processes but face significant drawbacks in scalability, power, and tailorability when compared to emerging integrated photonic systems. Silicon or silicon nitride integrated photonic circuits enhance and control the third-order optical nonlinearity by confining light in dispersion-engineered waveguides and resonators. An analogous platform for second-order nonlinear optics remains an outstanding challenge in photonics. It would enable stronger interactions at lower power and reduce the number of competing nonlinear processes that emerge. Here we demonstrate efficient frequency doubling and parametric oscillation in a thin-film lithium niobate photonic circuit. Our device combines recent progress on periodically poled thin-film lithium niobate waveguidesand low-loss microresonators. Here we realize efficient >10% second-harmonic generation and parametric oscillation with microwatts of optical power using a periodically-poled thin-film lithium niobate microresonator. The operating regimes of this system are controlled using the relative detuning of the intracavity resonances. During nondegenerate oscillation, the emission wavelength is tuned over terahertz by varying the pump frequency by 100's of megahertz. We observe highly-enhanced effective third-order nonlinearities caused by cascaded second-order processes resulting in parametric oscillation. These resonant second-order nonlinear circuits will form a crucial part of the emerging nonlinear and quantum photonics platforms.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Room-temperature Mechanical Resonator with a Single Added or Subtracted Phonon
Authors:
Rishi N. Patel,
Timothy P. McKenna,
Zhaoyou Wang,
Jeremy D. Witmer,
Wentao Jiang,
Raphaël Van Laer,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the a…
▽ More
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the addition and subtraction of single phonons on the 300K thermal motional state of a 4GHz mechanical oscillator. To understand the resulting mechanical state, we implement a tomography scheme and observe highly non-Gaussian phase-space distributions. Using a maximum likelihood method, we infer the density matrix of the oscillator and confirm the counter-intuitive doubling of the mean phonon number resulting from phonon addition and subtraction.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Loss channels affecting lithium niobate phononic crystal resonators at cryogenic temperature
Authors:
E. Alex Wollack,
Agnetta Y. Cleland,
Patricio Arrangoiz-Arriola,
Timothy P. McKenna,
Rachel G. Gruenke,
Rishi N. Patel,
Wentao Jiang,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
We investigate the performance of microwave-frequency phononic crystal resonators fabricated on thin-film lithium niobate for integration with superconducting quantum circuits. For different design geometries at millikelvin temperatures, we achieve mechanical internal quality factors $Q_i$ above $10^5 - 10^6$ at high microwave drive power, corresponding to $5\times10^6$ phonons inside the resonato…
▽ More
We investigate the performance of microwave-frequency phononic crystal resonators fabricated on thin-film lithium niobate for integration with superconducting quantum circuits. For different design geometries at millikelvin temperatures, we achieve mechanical internal quality factors $Q_i$ above $10^5 - 10^6$ at high microwave drive power, corresponding to $5\times10^6$ phonons inside the resonator. By swee** the defect size of resonators with identical mirror cell designs, we are able to indirectly observe signatures of the complete phononic bandgap via the resonators' internal quality factors. Examination of quality factors' temperature dependence shows how superconducting and two-level system (TLS) loss channels impact device performance. Finally, we observe an anomalous low-temperature frequency shift consistent with resonant TLS decay and find that material choice can help to mitigate these losses.
△ Less
Submitted 28 March, 2021; v1 submitted 2 October, 2020;
originally announced October 2020.
-
Bremsstrahlung emission and plasma characterization driven by moderately relativistic laser-plasma interactions
Authors:
Sushil Singh,
Chris D. Armstrong,
Ning Kang,
Lei Ren,
Huiya Liu,
Neng Hua,
Dean R. Rusby,
Ondřej Klimo,
Roberto Versaci,
Yan Zhang,
Mingying Sun,
Baoqiang Zhu,
Anle Lei,
** Ouyang,
Livia Lancia,
Alejandro Laso Garcia,
Andreas Wagner,
Thomas Cowan,
Jianqiang Zhu,
Theodor Schlegel,
Stefan Weber,
Paul McKenna,
David Neely,
Vladimir Tikhonchuk,
Deepak Kumar
Abstract:
Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright X-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawat…
▽ More
Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright X-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawatt-class glass laser pulses with solid targets at a maximum intensity of $10^{19}$ W/cm$^2$. In-situ measurements of specularly reflected light are used to provide an upper bound of laser absorption and to characterize focused laser intensity, the pre-plasma level and the generation mechanism of second harmonic light. The measured spectrum of electrons and bremsstrahlung radiation provide information about the efficiency of laser energy transfer.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Gigahertz phononic integrated circuits on thin-film lithium niobate on sapphire
Authors:
Felix M. Mayor,
Wentao Jiang,
Christopher J. Sarabalis,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic ci…
▽ More
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic circuits and systems. We present a platform, inspired by decades of advances in integrated photonics, that utilizes the strong piezoelectric effect in a thin film of lithium niobate on sapphire to excite guided acoustic waves immune from leakage into the bulk due to the phononic analogue of index-guiding. We demonstrate an efficient transducer matched to 50 ohm and guiding within a 1-micron wide mechanical waveguide as key building blocks of this platform. Putting these components together, we realize acoustic delay lines, racetrack resonators, and meander line waveguides for sensing applications. To evaluate the promise of this platform for emerging quantum technologies, we characterize losses at low temperature and measure quality factors on the order of 50,000 at 4 kelvin. Finally, we demonstrate phononic four-wave mixing in these circuits and measure the nonlinear coefficients to provide estimates of the power needed for relevant parametric processes.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
The Laser-hybrid Accelerator for Radiobiological Applications
Authors:
G. Aymar,
T. Becker,
S. Boogert,
M. Borghesi,
R. Bingham,
C. Brenner,
P. N. Burrows,
T. Dascalu,
O. C. Ettlinger,
S. Gibson,
T. Greenshaw,
S. Gruber,
D. Gujral,
C. Hardiman,
J. Hughes,
W. G. Jones,
K. Kirkby,
A. Kurup,
J-B. Lagrange,
K. Long,
W. Luk,
J. Matheson,
P. McKenna,
R. Mclauchlan,
Z. Najmudin
, et al. (15 additional authors not shown)
Abstract:
The `Laser-hybrid Accelerator for Radiobiological Applications', LhARA, is conceived as a novel, uniquely-flexible facility dedicated to the study of radiobiology. The technologies demonstrated in LhARA, which have wide application, will be developed to allow particle-beam therapy to be delivered in a completely new regime, combining a variety of ion species in a single treatment fraction and expl…
▽ More
The `Laser-hybrid Accelerator for Radiobiological Applications', LhARA, is conceived as a novel, uniquely-flexible facility dedicated to the study of radiobiology. The technologies demonstrated in LhARA, which have wide application, will be developed to allow particle-beam therapy to be delivered in a completely new regime, combining a variety of ion species in a single treatment fraction and exploiting ultra-high dose rates. LhARA will be a hybrid accelerator system in which laser interactions drive the creation of a large flux of protons or light ions that are captured using a plasma (Gabor) lens and formed into a beam. The laser-driven source allows protons and ions to be captured at energies significantly above those that pertain in conventional facilities, thus evading the current space-charge limit on the instantaneous dose rate that can be delivered. The laser-hybrid approach, therefore, will allow the vast ``terra incognita'' of the radiobiology that determines the response of tissue to ionising radiation to be studied with protons and light ions using a wide variety of time structures, spectral distributions, and spatial configurations at instantaneous dose rates up to and significantly beyond the ultra-high dose-rate `FLASH' regime.
It is proposed that LhARA be developed in two stages. In the first stage, a programme of in vitro radiobiology will be served with proton beams with energies between 10MeV and 15MeV. In stage two, the beam will be accelerated using a fixed-field accelerator (FFA). This will allow experiments to be carried out in vitro and in vivo with proton beam energies of up to 127MeV. In addition, ion beams with energies up to 33.4MeV per nucleon will be available for in vitro and in vivo experiments. This paper presents the conceptual design for LhARA and the R&D programme by which the LhARA consortium seeks to establish the facility.
△ Less
Submitted 31 May, 2020;
originally announced June 2020.
-
Acousto-optic modulation in lithium niobate on sapphire
Authors:
Christopher J. Sarabalis,
Timothy P. McKenna,
Rishi N. Patel,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devic…
▽ More
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devices, circuits, and systems.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Cryogenic microwave-to-optical conversion using a triply-resonant lithium niobate on sapphire transducer
Authors:
Timothy P. McKenna,
Jeremy D. Witmer,
Rishi N. Patel,
Wentao Jiang,
Raphaël Van Laer,
Patricio Arrangoiz-Arriola,
E. Alex Wollack,
Jason F. Herrmann,
Amir H. Safavi-Naeini
Abstract:
Quantum networks are likely to have a profound impact on the way we compute and communicate in the future. In order to wire together superconducting quantum processors over kilometer-scale distances, we need transducers that can generate entanglement between the microwave and optical domains with high fidelity. We present an integrated electro-optic transducer that combines low-loss lithium niobat…
▽ More
Quantum networks are likely to have a profound impact on the way we compute and communicate in the future. In order to wire together superconducting quantum processors over kilometer-scale distances, we need transducers that can generate entanglement between the microwave and optical domains with high fidelity. We present an integrated electro-optic transducer that combines low-loss lithium niobate photonics with superconducting microwave resonators on a sapphire substrate. Our triply-resonant device operates in a dilution refrigerator and converts microwave photons to optical photons with an on-chip efficiency of $6.6\times 10^{-6}$ and a conversion bandwidth of 20 MHz. We discuss design trade-offs in this device, including strategies to manage acoustic loss, and outline ways to increase the conversion efficiency in the future.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Growth, saturation and collapse of laser-driven plasma density gratings
Authors:
H. H. Ma,
S. M. Weng,
P. Li,
X. F. Li,
Y. X. Wang,
S. H. Yew,
M. Chen,
P. McKenna,
Z. M. Sheng
Abstract:
The plasma density grating induced by intersecting intense laser pulses can be utilized as an optical compressors, polarizers, waveplates and photonic crystals for the manipulation of ultra-high-power laser pulses. However, the formation and evolution of the plasma density grating are still not fully understood as linear models are adopted to describe them usually. In this paper, two nonlinear the…
▽ More
The plasma density grating induced by intersecting intense laser pulses can be utilized as an optical compressors, polarizers, waveplates and photonic crystals for the manipulation of ultra-high-power laser pulses. However, the formation and evolution of the plasma density grating are still not fully understood as linear models are adopted to describe them usually. In this paper, two nonlinear theoretical models are presented to study the formation process of the plasma density grating. In the first model, a nonlinear analytical solution based on the fluid equations is presented while in the second model a particle-mesh method is adopted to investigate the kinetic effects. It is found that both models can describe the plasma density grating formation at different stages, well beyond the linear growth stage. More importantly, the second model can reproduce the phenomenon of "ion wave-breaking" of plasma density grating, which eventually induces the saturation of plasma density grating. Using the second model, the saturation time of the plasma density grating is obtained as a function of laser intensity and plasma density, which can be applied to estimate the lifetime of the plasma density grating in experiments. The results from these two nonlinear models are verified using particle-in-cell simulations.
△ Less
Submitted 28 July, 2020; v1 submitted 9 February, 2020;
originally announced February 2020.
-
A silicon-organic hybrid platform for quantum microwave-to-optical transduction
Authors:
Jeremy D. Witmer,
Timothy P. McKenna,
Patricio Arrangoiz-Arriola,
Raphaël Van Laer,
E. Alex Wollack,
Francis Lin,
Alex K. -Y. Jen,
**gdong Luo,
Amir H. Safavi-Naeini
Abstract:
Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silic…
▽ More
Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon-organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 330 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Nanobenders: efficient piezoelectric actuators for widely tunable nanophotonics at CMOS-level voltages
Authors:
Wentao Jiang,
Felix M. Mayor,
Rishi N. Patel,
Timothy P. McKenna,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they suffer from trade-offs between tuning voltage, tuning range, and on-chip area. Piezoelectric actuation could resolve all these challenges. Standard materials po…
▽ More
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they suffer from trade-offs between tuning voltage, tuning range, and on-chip area. Piezoelectric actuation could resolve all these challenges. Standard materials possess piezoelectric coefficients on the order of ${0.01}~\text{nm/V}$, suggesting extremely small on-chip actuation using potentials on the order of one volt. Here we propose and demonstrate compact piezoelectric actuators, called nanobenders, that transduce tens of nanometers per volt. By leveraging the non-uniform electric field from submicron electrodes, we generate bending of a piezoelectric nanobeam. Combined with a sliced photonic crystal cavity to sense displacement, we show tuning of an optical resonance by $\sim 5~\text{nm/V}~({0.6}~\text{THz/V})$ and between $1520$ and $1560~\text{nm}$ ($\sim 400$ linewidths) with only $ {4}~\text{V}$. Finally, we consider other tunable nanophotonic components enabled by nanobenders.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Efficient bidirectional piezo-optomechanical transduction between microwave and optical frequency
Authors:
Wentao Jiang,
Christopher J. Sarabalis,
Yanni D. Dahmani,
Rishi N. Patel,
Felix M. Mayor,
Timothy P. McKenna,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. H…
▽ More
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. However, existing demonstrations suffer from some combination of low optical quality factor, low electrical-to-mechanical transduction efficiency, and low optomechanical interaction rate. Here we demonstrate an on-chip piezo-optomechanical transducer that systematically addresses all these challenges to achieve nearly three orders of magnitude improvement in conversion efficiency over previous work. Our modulator demonstrates acousto-optic modulation with $V_π = {0.02}$ V. We show bidirectional conversion efficiency of $10^{-5}$ with ${3.3}$ microwatts red-detuned optical pump, and $5.5\%$ with $323$ microwatts blue-detuned pump. Further study of quantum transduction at millikelvin temperatures is required to understand how the efficiency and added noise are affected by reduced mechanical dissipation, thermal conductivity, and thermal capacity.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Simultaneous polarization transformation and amplification of multi-petawatt laser pulses in magnetized plasmas
Authors:
Xiaolong Zheng,
Suming Weng,
Zhe Zhang,
Hanghang Ma,
Min Chen,
Paul McKenna,
Zhengming Sheng
Abstract:
With increasing laser peak power, the generation and manipulation of high-power laser pulses becomes a growing challenge for conventional solid-state optics due to their limited damage threshold. As a result, plasma-based optical components which can sustain extremely high fields are attracting increasing interest. Here, we propose a type of plasma waveplate based on magneto-optical birefringence…
▽ More
With increasing laser peak power, the generation and manipulation of high-power laser pulses becomes a growing challenge for conventional solid-state optics due to their limited damage threshold. As a result, plasma-based optical components which can sustain extremely high fields are attracting increasing interest. Here, we propose a type of plasma waveplate based on magneto-optical birefringence under a transverse magnetic field, which can work under extremely high laser power. Importantly, this waveplate can simultaneously alter the polarization state and boost the peak laser power. It is demonstrated numerically that an initially linearly polarized laser pulse with 5 petawatt peak power can be converted into a circularly polarized pulse with a peak power higher than 10 petawatts by such a waveplate with a centimeter-scale diameter. The energy conversion efficiency of the polarization transformation is about $98\%$. The necessary waveplate thickness is shown to scale inversely with plasma electron density $n_e$ and the square of magnetic field $B_0$, and it is about 1 cm for $n_e=3\times 10^{20}$ cm$^{-3}$ and $B_0=100$ T. The proposed plasma waveplate and other plasma-based optical components can play a critical role for the effective utilization of multi-petawatt laser systems.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
Alignment-free cryogenic optical coupling to an optomechanical crystal
Authors:
Timothy P. McKenna,
Rishi N. Patel,
Jeremy D. Witmer,
Raphaël Van Laer,
Joseph A. Valery,
Amir H. Safavi-Naeini
Abstract:
The need for highly accurate, labor-intensive optical alignment has been a major hurdle in our ability to leverage the power of complex photonic integrated circuits. There is a strong need for tolerant and passive alignment methods that enable interrogation at any point in a photonic circuit. Various promising and scalable photonic packaging techniques have been under development, but few methods…
▽ More
The need for highly accurate, labor-intensive optical alignment has been a major hurdle in our ability to leverage the power of complex photonic integrated circuits. There is a strong need for tolerant and passive alignment methods that enable interrogation at any point in a photonic circuit. Various promising and scalable photonic packaging techniques have been under development, but few methods compatible with low-temperature operation have been reported. Here, we demonstrate alignment-free $25\%$ coupling efficiency from an optical fiber to a silicon optomechanical crystal at 7 mK in a dilution refrigerator. Our coupling scheme uses angle-polished fibers glued to the surface of the chip. The technique paves the way for scalable integration of optical technologies at low temperatures, circumventing the need for optical alignment in a highly constrained cryogenic environment. The technique is broadly applicable to studies of low-temperature optical physics and to emerging quantum photonic technologies.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Lithium Niobate Piezo-optomechanical Crystals
Authors:
Wentao Jiang,
Rishi N. Patel,
Felix M. Mayor,
Timothy P. McKenna,
Patricio Arrangoiz-Arriola,
Christopher J. Sarabalis,
Jeremy D. Witmer,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically t…
▽ More
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically to microwaves. For optomechanical coupling, we leverage the photoelastic effect in LN by optimizing the device parameters to realize coupling rates $g_0/2π\approx 120~\textrm{kHz}$. An optomechanical cooperativity $C>1$ is achieved leading to phonon lasing. Electrodes on the nanoresonator piezoelectrically drive mechanical waves on the beam that are then read out optically allowing direct observation of the phononic bandgap. Quantum coupling efficiency of $η\approx10^{-8}$ from the input microwave port to the localized mechanical resonance is measured. Improvements of the microwave circuit and electrode geometry can increase this efficiency and bring integrated ultra-low-power modulators and quantum microwave-to-optical converters closer to reality.
△ Less
Submitted 3 March, 2019;
originally announced March 2019.
-
A new energy spectrum reconstruction method for Time-Of-Flight diagnostics of high-energy laser-driven protons
Authors:
G. Milluzzo,
V. Scuderi,
A. Alejo,
A. G. Amico,
N. Booth,
M. Borghesi,
G. A. P. Cirrone,
G. Cuttone,
D. Doria,
J. Green,
S. Kar,
G. Korn,
G. Larosa,
R. Leanza,
D. Margarone,
P. Martin,
P. McKenna,
G. Petringa,
J. Pipek,
L. Romagnani,
F. Romano,
A. Russo,
F. Schillaci
Abstract:
The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereb…
▽ More
The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereby presented and discussed. The proposed method takes into account the detector's working principle, through the accurate calculation of the energy loss in the detector active layer, using Monte Carlo simulations. The analysis method was validated against well-established diagnostics, such as the Thomson Parabola Spectrometer, during an experimental campaign carried out at the Rutherford Appleton Laboratory (RAL, UK) with the high-energy laser-driven protons accelerated by the VULCAN Petawatt laser.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Electrical driving of X-band mechanical waves in a silicon photonic circuit
Authors:
Raphaël Van Laer,
Rishi N. Patel,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
Reducing energy dissipation is a central goal of classical and quantum technologies. Optics achieved great success in bringing down power consumption of long-distance communication links. With the rise of mobile, quantum and cloud technologies, it is essential to extend this success to shorter links. Electro-optic modulators are a crucial contributor of dissipation in such links. Numerous variatio…
▽ More
Reducing energy dissipation is a central goal of classical and quantum technologies. Optics achieved great success in bringing down power consumption of long-distance communication links. With the rise of mobile, quantum and cloud technologies, it is essential to extend this success to shorter links. Electro-optic modulators are a crucial contributor of dissipation in such links. Numerous variations on important mechanisms such as free-carrier modulation and the Pockels effect are currently pursued, but there are few investigations of mechanical motion as an electro-optic mechanism in silicon. In this work, we demonstrate electrical driving and optical read-out of a 7.2 GHz mechanical mode of a silicon photonic waveguide. The electrical driving is capacitive and can be implemented in any material system. The measurements show that the mechanically-mediated optical phase modulation is two orders of magnitude more efficient than the background phase modulation in our system. Our demonstration is an important step towards efficient opto-electro-mechanical devices in a scalable photonic platform.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
THz pulses over 50 millijoules generated from relativistic picosecond laser-plasma interactions
Authors:
Guoqian Liao,
Hao Liu,
Yutong Li,
Graeme G. Scott,
David Neely,
Yihang Zhang,
Baojun Zhu,
Zhe Zhang,
Chris Armstrong,
Egle Zemaityte,
Philip Bradford,
Peter G. Huggard,
Paul McKenna,
Ceri M. Brenner,
Nigel C. Woolsey,
Weimin Wang,
Zhengming Sheng,
Jie Zhang
Abstract:
Ultrahigh-power terahertz (THz) radiation sources are essential for many applications, such as nonlinear THz physics, THz-wave based compact accelerators, etc. However, until now none of THz sources reported, whether based upon large-scale accelerators or high power lasers, have produced THz pulses with energies above the millijoule (mJ) barrier. Here we report on the efficient generation of low-f…
▽ More
Ultrahigh-power terahertz (THz) radiation sources are essential for many applications, such as nonlinear THz physics, THz-wave based compact accelerators, etc. However, until now none of THz sources reported, whether based upon large-scale accelerators or high power lasers, have produced THz pulses with energies above the millijoule (mJ) barrier. Here we report on the efficient generation of low-frequency (<3 THz) THz pulses with unprecedentedly high energies over 50 mJ. The THz radiation is produced by coherent transition radiation of a picosecond laser-accelerated ultra-bright bunch of relativistic electrons from a solid target. Such high energy THz pulses can not only trigger various nonlinear dynamics in matter, but also open up a new research field of relativistic THz optics.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Stable attosecond electron bunches from a nanofiber driven by Laguerre-Gaussian lasers
Authors:
Li-Xiang Hu,
Tong-Pu Yu,
Zheng-Ming Sheng,
Jorge Vieira,
De-Bin Zou,
Yan Yin,
Paul McKenna,
Fu-Qiu Shao
Abstract:
Generation of attosecond bunches of energetic electrons offers significant potential from ultrafast physics to novel radiation sources. However, it is still a great challenge to stably produce such electron beams with lasers, since the typical sub-femtosecond electron bunches from laser-plasma interactions either carry low beam charge, or propagate for only several tens of femtoseconds. Here we pr…
▽ More
Generation of attosecond bunches of energetic electrons offers significant potential from ultrafast physics to novel radiation sources. However, it is still a great challenge to stably produce such electron beams with lasers, since the typical sub-femtosecond electron bunches from laser-plasma interactions either carry low beam charge, or propagate for only several tens of femtoseconds. Here we propose an all-optical scheme for generating dense attosecond electron bunches via the interaction of an intense Laguerre-Gaussian (LG) laser pulse with a nanofiber. The stable bunch train results from the unique field structure of a circularly polarized LG laser pulse, enabling each bunch to be phase-locked and accelerated forward with low divergence, high beam charge and large beam-angular-momentum. This paves the way for wide applications in various fields, e.g., ultrabrilliant attosecond x/$γ$-ray emission.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
Experimental signatures of the quantum nature of radiation reaction in the field of an ultra-intense laser
Authors:
K. Poder,
M. Tamburini,
G. Sarri,
A. Di Piazza,
S. Kuschel,
C. D. Baird,
K. Behm,
S. Bohlen,
J. M. Cole,
D. J. Corvan,
M. Duff,
E. Gerstmayr,
C. H. Keitel,
K. Krushelnick,
S. P. D. Mangles,
P. McKenna,
C. D. Murphy,
Z. Najmudin,
C. P. Ridgers,
G. M. Samarin,
D. Symes,
A. G. R. Thomas,
J. Warwick,
M. Zepf
Abstract:
The description of the dynamics of an electron in an external electromagnetic field of arbitrary intensity is one of the most fundamental outstanding problems in electrodynamics. Remarkably, to date there is no unanimously accepted theoretical solution for ultra-high intensities and little or no experimental data. The basic challenge is the inclusion of the self-interaction of the electron with th…
▽ More
The description of the dynamics of an electron in an external electromagnetic field of arbitrary intensity is one of the most fundamental outstanding problems in electrodynamics. Remarkably, to date there is no unanimously accepted theoretical solution for ultra-high intensities and little or no experimental data. The basic challenge is the inclusion of the self-interaction of the electron with the field emitted by the electron itself - the so-called radiation reaction force. We report here on the experimental evidence of strong radiation reaction, in an all-optical experiment, during the propagation of highly relativistic electrons (maximum energy exceeding 2 GeV) through the field of an ultra-intense laser (peak intensity of $4\times10^{20}$ W/cm$^2$). In their own rest frame, the highest energy electrons experience an electric field as high as one quarter of the critical field of quantum electrodynamics and are seen to lose up to 30% of their kinetic energy during the propagation through the laser field. The experimental data show signatures of quantum effects in the electron dynamics in the external laser field, potentially showing departures from the constant cross field approximation.
△ Less
Submitted 30 July, 2018; v1 submitted 6 September, 2017;
originally announced September 2017.
-
Signatures of quantum effects on radiation reaction in laser -- electron-beam collisions
Authors:
C. P. Ridgers,
T. G. Blackburn,
D. Del Sorbo,
L. E. Bradley,
C. D. Baird,
S. P. D. Mangles,
P. McKenna,
M. Marklund,
C. D. Murphy,
A. G. R. Thomas
Abstract:
Two signatures of quantum effects on radiation reaction in the collision of a ~GeV electron-beam with a high-intensity (>3x10^20W/cm^2) laser-pulse have been considered. We show that the decrease in the average energy of the electron-beam may be used to measure the Gaunt factor g for synchrotron emission. We derive an equation for the evolution of the variance in the energy of the electron-beam in…
▽ More
Two signatures of quantum effects on radiation reaction in the collision of a ~GeV electron-beam with a high-intensity (>3x10^20W/cm^2) laser-pulse have been considered. We show that the decrease in the average energy of the electron-beam may be used to measure the Gaunt factor g for synchrotron emission. We derive an equation for the evolution of the variance in the energy of the electron-beam in the quantum regime, i.e. quantum efficiency parameter eta > 0.1$. We show that the evolution of the variance may be used as a direct measure of the quantum stochasticity of the radiation reaction and determine the parameter regime where this is observable. For example, stochastic emission results in a 25% increase in the standard deviation of the energy spectrum of a GeV electron beam, 1 fs after it collides with a laser pulse of intensity 10^21 W/cm^2. This effect should therefore be measurable using current high-intensity laser systems.
△ Less
Submitted 17 July, 2017;
originally announced August 2017.
-
Experimental evidence of radiation reaction in the collision of a high-intensity laser pulse with a laser-wakefield accelerated electron beam
Authors:
J. M. Cole,
K. T. Behm,
T. G. Blackburn,
J. C. Wood,
C. D. Baird,
M. J. Duff,
C. Harvey,
A. Ilderton,
A. S. Joglekar,
K. Krushelnik,
S. Kuschel,
M. Marklund,
P. McKenna,
C. D. Murphy,
K. Poder,
C. P. Ridgers,
G. M. Samarin,
G. Sarri,
D. R. Symes,
A. G. R. Thomas,
J. Warwick,
M. Zepf,
Z. Najmudin,
S. P. D. Mangles
Abstract:
The dynamics of energetic particles in strong electromagnetic fields can be heavily influenced by the energy loss arising from the emission of radiation during acceleration, known as radiation reaction. When interacting with a high-energy electron beam, today's lasers are sufficiently intense to explore the transition between the classical and quantum radiation reaction regimes. We report on the o…
▽ More
The dynamics of energetic particles in strong electromagnetic fields can be heavily influenced by the energy loss arising from the emission of radiation during acceleration, known as radiation reaction. When interacting with a high-energy electron beam, today's lasers are sufficiently intense to explore the transition between the classical and quantum radiation reaction regimes. We report on the observation of radiation reaction in the collision of an ultra-relativistic electron beam generated by laser wakefield acceleration ($\varepsilon > 500$ MeV) with an intense laser pulse ($a_0 > 10$). We measure an energy loss in the post-collision electron spectrum that is correlated with the detected signal of hard photons ($γ$-rays), consistent with a quantum (stochastic) description of radiation reaction. The generated $γ$-rays have the highest energies yet reported from an all-optical inverse Compton scattering scheme, with critical energy $\varepsilon_{\rm crit} > $ 30 MeV.
△ Less
Submitted 4 January, 2018; v1 submitted 21 July, 2017;
originally announced July 2017.
-
Efficient ion acceleration and dense electron-positron plasma creation in ultra-high intensity laser-solid interactions
Authors:
D. Del Sorbo,
D. R. Blackman,
R. Capdessus,
K. Small,
C. Slade-Lowther,
W. Luo,
M. J. Duff,
A. P. L. Robinson,
P. McKenna,
Z. -M. Sheng,
J. Pasley,
C. P. Ridgers
Abstract:
The radiation pressure of next generation ultra-high intensity ($>10^{23}$ W/cm$^{2}$) lasers could efficiently accelerate ions to GeV energies. However, nonlinear quantum-electrodynamic effects play an important role in the interaction of these laser pulses with matter. Here we show that these effects may lead to the production of an extremely dense ($\sim10^{24}$ cm$^{-3}$) pair-plasma which abs…
▽ More
The radiation pressure of next generation ultra-high intensity ($>10^{23}$ W/cm$^{2}$) lasers could efficiently accelerate ions to GeV energies. However, nonlinear quantum-electrodynamic effects play an important role in the interaction of these laser pulses with matter. Here we show that these effects may lead to the production of an extremely dense ($\sim10^{24}$ cm$^{-3}$) pair-plasma which absorbs the laser pulse consequently reducing the accelerated ion energy and energy conversion efficiency by up to 30-50\% \& 50-65\%, respectively. Thus we identify the regimes of laser-matter interaction where either ions are efficiently accelerated or dense pair-plasmas are produced as a guide for future experiments.
△ Less
Submitted 27 March, 2018; v1 submitted 13 June, 2017;
originally announced June 2017.
-
Beamed neutron emission driven by laser accelerated light ions
Authors:
S. Kar,
A. Green,
H. Ahmed,
A. Alejo,
A. P. L. Robinson,
M. Cerchez,
R. Clarke,
D. Doria,
S. Dorkings,
J. Fernandez,
S. R. Mirfyazi,
P. McKenna,
K. Naughton,
D. Neely,
P. Norreys,
C. Peth,
H. Powell,
J. A. Ruiz,
J. Swain,
O. Willi,
M. Borghesi
Abstract:
We report on the experimental observation of beam-like neutron emission with peak flux of the order of 10^9 n/sr, from light nuclei reactions in a pitcher-catcher scenario, by employing MeV ions driven by high power laser. The spatial profile of the neutron beam, fully captured for the first time by employing a CR39 nuclear track detector, shows a FWHM divergence angle of 70 degrees, with a peak f…
▽ More
We report on the experimental observation of beam-like neutron emission with peak flux of the order of 10^9 n/sr, from light nuclei reactions in a pitcher-catcher scenario, by employing MeV ions driven by high power laser. The spatial profile of the neutron beam, fully captured for the first time by employing a CR39 nuclear track detector, shows a FWHM divergence angle of 70 degrees, with a peak flux nearly an order of magnitude higher than the isotropic component elsewhere. The observed beamed flux of neutrons is highly favourable for a wide range of applications, and indeed for further transport and moderation to thermal energies. A systematic study employing various combinations of pitcher-catcher materials indicates the dominant reactions being d(p, n+p)^1H and d(d,n)^3He. Albeit insufficient cross-section data are available for modelling, the observed anisotropy in the neutrons' spatial and spectral profiles are most likely related to the directionality and high energy of the projectile ions.
△ Less
Submitted 16 July, 2015;
originally announced July 2015.
-
Buffered spectrally-peaked proton beams in the relativistic-transparency regime
Authors:
N. P. Dover,
M. J. V. Streeter,
C. A. J. Palmer,
H. Ahmed,
B. Albertazzi,
M. Borghesi,
D. C. Carroll,
J. Fuchs,
R. Heathcote,
P. Hilz,
K. F. Kakolee,
S. Kar,
R. Kodama,
A. Kon,
D. A. MacLellan,
P. McKenna,
S. R. Nagel,
M. Nakatsutsumi,
D. Neely,
M. M. Notley,
R. Prasad,
G. Scott,
M. Tampo,
M. Zepf,
J. Schreiber
, et al. (1 additional authors not shown)
Abstract:
Spectrally-peaked proton beams ($E_{p}\approx 8$ MeV, $ΔE\approx 4$ MeV) have been observed from the interaction of an intense laser ($> 10^{19 }$ Wcm$^{-2}$) with ultrathin CH foils, as measured by spectrally-resolved full beam profiles. These beams are reproducibly generated for foil thicknesses (5-100 nm), and exhibit narrowing divergence with decreasing target thickness down to…
▽ More
Spectrally-peaked proton beams ($E_{p}\approx 8$ MeV, $ΔE\approx 4$ MeV) have been observed from the interaction of an intense laser ($> 10^{19 }$ Wcm$^{-2}$) with ultrathin CH foils, as measured by spectrally-resolved full beam profiles. These beams are reproducibly generated for foil thicknesses (5-100 nm), and exhibit narrowing divergence with decreasing target thickness down to $\approx 8^\circ$ for 5 nm. Simulations demonstrate that the narrow energy spread feature is a result of buffered acceleration of protons. Due to their higher charge-to-mass ratio, the protons outrun a carbon plasma driven in the relativistic transparency regime.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Ion acceleration in multispecies targets driven by intense laser radiation pressure
Authors:
S. Kar,
K. F. Kakolee,
B. Qiao,
A. Macchi,
M. Cerchez,
D. Doria,
M. Geissler,
P. McKenna,
D. Neely,
J. Osterholz,
R. Prasad,
K. Quinn,
B. Ramakrisna,
G. Sarri,
O. Willi,
X. Y. Yuan,
M. Zepf,
M. Borghesi
Abstract:
The acceleration of ions from ultra-thin foils has been investigated using 250 TW, sub-ps laser pulses, focused on target at intensities up to $3\times10^{20} \Wcm2$. The ion spectra show the appearance of narrow band features for proton and Carbon peaked at higher energy (in the 5-10 MeV/nucleon range) and with significantly higher flux than previously reported. The spectral features, and their s…
▽ More
The acceleration of ions from ultra-thin foils has been investigated using 250 TW, sub-ps laser pulses, focused on target at intensities up to $3\times10^{20} \Wcm2$. The ion spectra show the appearance of narrow band features for proton and Carbon peaked at higher energy (in the 5-10 MeV/nucleon range) and with significantly higher flux than previously reported. The spectral features, and their scaling with laser and target parameters, provide evidence of a multispecies scenario of Radiation Pressure Acceleration in the Light Sail mode, as confirmed by analytical estimates and 2D Particle In Cell simulations. The scaling indicates that monoenergetic peaks with more than 100 MeV/nucleon energies are obtainable with moderate improvements of the target and laser characteristics, which are within reach of ongoing technical developments.
△ Less
Submitted 18 July, 2012;
originally announced July 2012.
-
Exotic dense matter states pumped by relativistic laser plasma in the radiation dominant regime
Authors:
J. Colgan,
J. Abdallah, Jr.,
A. Ya. Faenov,
S. A. Pikuz,
E. Wagenaars,
N. Booth,
C. R. D. Brown,
O. Culfa,
R. J. Dance,
R. G. Evans,
R. J. Gray,
D. J. Hoarty,
T. Kaempfer,
K. L. Lancaster,
P. McKenna,
A. L. Rossall,
I. Yu. Skobelev,
K. S. Schulze,
I. Uschmann,
A. G. Zhidkov,
N. C. Woolsey
Abstract:
The properties of high energy density plasma are under increasing scrutiny in recent years due to their importance to our understanding of stellar interiors, the cores of giant planets$^{1}$, and the properties of hot plasma in inertial confinement fusion devices$^2$. When matter is heated by X-rays, electrons in the inner shells are ionized before the valence electrons. Ionization from the inside…
▽ More
The properties of high energy density plasma are under increasing scrutiny in recent years due to their importance to our understanding of stellar interiors, the cores of giant planets$^{1}$, and the properties of hot plasma in inertial confinement fusion devices$^2$. When matter is heated by X-rays, electrons in the inner shells are ionized before the valence electrons. Ionization from the inside out creates atoms or ions with empty internal electron shells, which are known as hollow atoms (or ions)$^{3,4,5}$. Recent advances in free-electron laser (FEL) technology$^{6,7,8,9}$ have made possible the creation of condensed matter consisting predominantly of hollow atoms. In this Letter, we demonstrate that such exotic states of matter, which are very far from equilibrium, can also be formed by more conventional optical laser technology when the laser intensity approaches the radiation dominant regime$^{10}$. Such photon-dominated systems are relevant to studies of photoionized plasmas found in active galactic nuclei and X-ray binaries$^{11}$. Our results promote laser-produced plasma as a unique ultra-bright x-ray source for future studies of matter in extreme conditions as well as for radiography of biological systems and for material science studies$^{12,13,14,15}$.
△ Less
Submitted 27 June, 2012;
originally announced June 2012.
-
Soft X-ray harmonic comb from relativistic electron spikes
Authors:
A. S. Pirozhkov,
M. Kando,
T. Zh. Esirkepov,
P. Gallegos,
H. Ahmed,
E. N. Ragozin,
A. Ya. Faenov,
T. A. Pikuz,
T. Kawachi,
A. Sagisaka,
J. K. Koga,
M. Coury,
J. Green,
P. Foster,
C. Brenner,
B. Dromey,
D. R. Symes,
M. Mori,
K. Kawase,
T. Kameshima,
Y. Fukuda,
L. Chen,
I. Daito,
K. Ogura,
Y. Hayashi
, et al. (15 additional authors not shown)
Abstract:
We demonstrate a new high-order harmonic generation mechanism reaching the `water window' spectral region in experiments with multi-terawatt femtosecond lasers irradiating gas jets. A few hundred harmonic orders are resolved, giving uJ/sr pulses. Harmonics are collectively emitted by an oscillating electron spike formed at the joint of the boundaries of a cavity and bow wave created by a relativis…
▽ More
We demonstrate a new high-order harmonic generation mechanism reaching the `water window' spectral region in experiments with multi-terawatt femtosecond lasers irradiating gas jets. A few hundred harmonic orders are resolved, giving uJ/sr pulses. Harmonics are collectively emitted by an oscillating electron spike formed at the joint of the boundaries of a cavity and bow wave created by a relativistically self-focusing laser in underdense plasma. The spike sharpness and stability are explained by catastrophe theory. The mechanism is corroborated by particle-in-cell simulations.
△ Less
Submitted 1 January, 2012;
originally announced January 2012.
-
Hollow microspheres as targets for staged laser-driven proton acceleration
Authors:
M. Burza,
A. Gonoskov,
G. Genoud,
A. Persson,
K. Svensson,
M. Quinn,
P. McKenna,
M. Marklund,
C. -G. Wahlström
Abstract:
A coated hollow core microsphere is introduced as a novel target in ultra-intense laser-matter interaction experiments. In particular, it facilitates staged laser-driven proton acceleration by combining conventional target normal sheath acceleration (TNSA), power recycling of hot laterally spreading electrons and staging in a very simple and cheap target geometry. During TNSA of protons from one a…
▽ More
A coated hollow core microsphere is introduced as a novel target in ultra-intense laser-matter interaction experiments. In particular, it facilitates staged laser-driven proton acceleration by combining conventional target normal sheath acceleration (TNSA), power recycling of hot laterally spreading electrons and staging in a very simple and cheap target geometry. During TNSA of protons from one area of the sphere surface, laterally spreading hot electrons form a charge wave. Due to the spherical geometry, this wave refocuses on the opposite side of the sphere, where an opening has been laser micromachined. This leads to a strong transient charge separation field being set up there, which can post-accelerate those TNSA protons passing through the hole at the right time. Experimentally, the feasibility of using such targets is demonstrated. A redistribution is encountered in the experimental proton energy spectra, as predicted by particle-in-cell simulations and attributed to transient fields set up by oscillating currents on the sphere surface.
△ Less
Submitted 1 February, 2011;
originally announced February 2011.