-
Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D
Authors:
D. R. Ernst,
A. Bortolon,
C. S. Chang,
S. Ku,
F. Scotti,
H. Q. Wang,
Z. Yan,
Jie Chen,
C. Chrystal,
F. Glass,
S. Haskey,
R. Hood,
F. Khabanov,
F. Laggner,
C. Lasnier,
G. R. McKee,
T. L. Rhodes,
D. Truong,
J. Watkins
Abstract:
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with…
▽ More
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.
△ Less
Submitted 1 June, 2024; v1 submitted 29 February, 2024;
originally announced March 2024.
-
Characterization of mesoscopic turbulent transport events with long-radial-range correlation in DIII-D H-mode plasmas
Authors:
R. Hong,
T. L. Rhodes,
Y. Ren,
P. H. Diamond,
X. Jian,
L. Zeng,
K. Barada,
Z. Yan,
G. R. McKee
Abstract:
A dimensionless collisionality scan has been performed in H-mode plasmas on DIII-D tokamak, with detailed measurements of intermediate-to-high wavenumber turbulence using Doppler backscattering systems. It is found that the shorter wavelength turbulence develops into spatially asymmetric turbulent structures with a long-radial-range correlation (LRRC) in the mid-radius region of high-collisionalit…
▽ More
A dimensionless collisionality scan has been performed in H-mode plasmas on DIII-D tokamak, with detailed measurements of intermediate-to-high wavenumber turbulence using Doppler backscattering systems. It is found that the shorter wavelength turbulence develops into spatially asymmetric turbulent structures with a long-radial-range correlation (LRRC) in the mid-radius region of high-collisionality discharges. Linear \textsc{cgyro} simulations indicate that the underlying turbulence is likely driven by the electron-temperature-gradient (ETG) mode. The LRRC transport events are highly intermittent and show a power spectrum of \(S_{\tilde{n}}(k_\perp) \propto k^{-1}_\perp\) for density fluctuations, which is often associated with self-organized criticality. The magnitude and the radial scale of those turbulent structures increase significantly when the $E_{r}\times B$ mean flow shearing rate decreases. The enhanced LRRC transport events appear to be correlated with the degraded energy confinement time. The emergence of such LRRC transport events may serve as a candidate explanation for the degrading nature of \emph{H}-mode core plasma confinement at high collisionality.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Two-dimensional plasma density evolution local to the inversion layer during sawtooth crash events using Beam Emission Spectroscopy
Authors:
Sayak Bose,
William Fox,
Dingyun Liu,
Zheng Yan,
George McKee,
Aaron Goodman,
Hantao Ji
Abstract:
We present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2-D spatial plane, inherently local measurements, with fast time responses, and therefore provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-…
▽ More
We present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2-D spatial plane, inherently local measurements, with fast time responses, and therefore provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-induced edge-light pulses contained in the BES data. The edge light pulses appear to be from the $\rm{D}_α$ emission produced by edge recycling during sawtooth events, and are large enough that traditional spectroscopic filtering and data analysis techniques are insufficient to deduce physically meaningful quantities. A cross-calibration of 64 BES channels is performed using a novel method to ensure accurate measurements. For the large-amplitude density oscillations observed, we discuss and use the non-linear relationship between BES signal $δI/I_{0}$ and plasma density variation $δn_{e}/n_{e0}$. 2-D BES images cover a 8~cm~$\times$~20~cm region around the sawtooth inversion layer and show large-amplitude density oscillations, with additional significant spatial variations across the inversion layer, which grows and peaks near the time of the temperature crash. The edge light removal technique and method of converting large-amplitude $δI/I_{0}$ to $δn_{e}/n_{e0}$ presented here may help analyze other impulsive MHD phenomena in tokamaks.
△ Less
Submitted 15 April, 2022;
originally announced April 2022.
-
Effect of magnetic perturbations on turbulence-flow dynamics at the L-H transition on DIII-D
Authors:
D. M. Kriete,
G. R. McKee,
L. Schmitz,
D. R. Smith,
Z. Yan,
L. A. Morton,
R. J. Fonck
Abstract:
Detailed 2D turbulence measurements from the DIII-D tokamak provide an explanation for how resonant magnetic perturbations (RMPs) raise the L-H power threshold $P_\textrm{LH}$ [P. Gohil et al., Nucl. Fusion 51, 103020 (2011)] in ITER-relevant, low rotation, ITER-similar-shape plasmas with favorable ion $\nabla B$ direction. RMPs simultaneously raise the turbulence decorrelation rate $Δω_D$ and red…
▽ More
Detailed 2D turbulence measurements from the DIII-D tokamak provide an explanation for how resonant magnetic perturbations (RMPs) raise the L-H power threshold $P_\textrm{LH}$ [P. Gohil et al., Nucl. Fusion 51, 103020 (2011)] in ITER-relevant, low rotation, ITER-similar-shape plasmas with favorable ion $\nabla B$ direction. RMPs simultaneously raise the turbulence decorrelation rate $Δω_D$ and reduce the flow shear rate $ω_\textrm{shear}$ in the stationary L-mode state preceding the L-H transition, thereby disrupting the turbulence shear suppression mechanism. RMPs also reduce the Reynolds stress drive for poloidal flow, contributing to the reduction of $ω_\textrm{shear}$ On the ~100 μs timescale of the L-H transition, RMPs reduce Reynolds-stress-driven energy transfer from turbulence to flows by an order of magnitude, challenging the energy depletion theory for the L-H trigger mechanism. In contrast, non-resonant magnetic perturbations, which do not significantly affect $P_\textrm{LH}$, do not affect $Δω_D$ and only slightly reduce $ω_\textrm{shear}$ and Reynolds-stress-driven energy transfer.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
The Dependence of the Impurity Transport on the Dominant Turbulent Regime in ELM-y H-mode Discharges
Authors:
Tomas Odstrcil,
Nathan Howard,
Francesco Sciortino,
Colin Chrystal,
Chris Holland,
Eric Hollmann,
George McKee,
Kathreen Thome,
Teresa Wilks
Abstract:
Laser blow-off injections of aluminum and tungsten have been performed on the DIII-D tokamak to investigate the variation of impurity transport in a set of dedicated ion and electron heating scans with a fixed value of the external torque. The particle transport is quantified via the Bayesian inference method, which, constrained by a combination of a charge exchange recombination spectroscopy, sof…
▽ More
Laser blow-off injections of aluminum and tungsten have been performed on the DIII-D tokamak to investigate the variation of impurity transport in a set of dedicated ion and electron heating scans with a fixed value of the external torque. The particle transport is quantified via the Bayesian inference method, which, constrained by a combination of a charge exchange recombination spectroscopy, soft X-ray measurements, and VUV spectroscopy provides a detailed uncertainty quantification of the transport coefficients. Contrasting discharge phases with a dominant electron and ion heating reveal a factor of 30 increase in midradius impurity diffusion and a 3-fold drop in the impurity confinement time when additional electron heating is applied. Further, the calculated stationary aluminum density profiles reverse from peaked in electron heated to hollow in the ion heated case, following a similar trend as electron and carbon density profiles. Comparable values of a core diffusion have been observed for W and Al ions, while differences in the propagation dynamics of these impurities are attributed to pedestal and edge transport. Modeling of the core transport with non-linear gyrokinetics code CGYRO [J. Candy and E. Belly J. Comput. Phys. 324,73 (2016)], significantly underpredicts the magnitude of the variation in Al transport. The experiment demonstrates a 3-times steeper increase of impurity diffusion with additional electron heat flux and 10-times lower diffusion in ion heated case than predicted by the modeling. However, the CGYRO model correctly predicts that the Al diffusion dramatically increases below the linear threshold for the transition from the ion temperature gradient (ITG) to trapped electron mode (TEM).
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Gyrokinetic GENE simulations of DIII-D near-edge L-mode plasmas
Authors:
T. F. Neiser,
F. Jenko,
T. A. Carter,
L. Schmitz,
D. Told,
G. Merlo,
A. Bañón Navarro,
P. C. Crandall,
G. R. McKee,
Z. Yan
Abstract:
We present gyrokinetic simulations with the GENE code addressing the near-edge region of an L-mode plasma in the DIII-D tokamak. At radial position $ρ=0.80$, simulations with the ion temperature gradient increased by $40\%$ above the nominal value give electron and ion heat fluxes that are in simultaneous agreement with the experiment. This gradient increase is consistent with the combined statist…
▽ More
We present gyrokinetic simulations with the GENE code addressing the near-edge region of an L-mode plasma in the DIII-D tokamak. At radial position $ρ=0.80$, simulations with the ion temperature gradient increased by $40\%$ above the nominal value give electron and ion heat fluxes that are in simultaneous agreement with the experiment. This gradient increase is consistent with the combined statistical and systematic uncertainty $σ$ of the Charge Exchange Recombination Spectroscopy (CER) measurements at the $1.6 σ$ level. Multi-scale simulations are carried out with realistic mass ratio and geometry for the first time in the near-edge. These multi-scale simulations suggest that the highly unstable ion temperature gradient (ITG) modes of the flux-matched ion-scale simulations suppress electron-scale transport, such that ion-scale simulations are sufficient at this location. At radial position $ρ=0.90$, nonlinear simulations show a hybrid state of ITG and trapped electron modes~(TEMs), which was not expected from linear simulations. The nonlinear simulations reproduce the total experimental heat flux with the inclusion of $\mathbf{E} \times \mathbf{B}$ shear effects and an increase in the electron temperature gradient by $\sim 23\%$. This gradient increase is compatible with the combined statistical and systematic uncertainty of the Thomson scattering data at the $1.3 σ$ level. These results are consistent with previous findings that gyrokinetic simulations are able to reproduce the experimental heat fluxes by varying input parameters close to their experimental uncertainties, pushing the validation frontier closer to the edge region.
△ Less
Submitted 28 October, 2019; v1 submitted 20 August, 2018;
originally announced August 2018.
-
Enhanced Sensitivity Beam Emission Spectroscopy System for Nonlinear Turbulence Measurements
Authors:
Deepak K Gupta,
Raymond J Fonck,
George R McKee,
David J Schlossberg,
Morgan W Shafer
Abstract:
An upgraded Beam Emission Spectroscopy (BES) system has been deployed to access low amplitude turbulence regions near internal transport barriers on the DIII-D tokamak. Sixteen high sensitivity channels are being installed. A significant increase in total signal to noise is achieved by: 1.) Increased spatial volume sampling tailored to known turbulence characteristics; 2.) An increased throughpu…
▽ More
An upgraded Beam Emission Spectroscopy (BES) system has been deployed to access low amplitude turbulence regions near internal transport barriers on the DIII-D tokamak. Sixteen high sensitivity channels are being installed. A significant increase in total signal to noise is achieved by: 1.) Increased spatial volume sampling tailored to known turbulence characteristics; 2.) An increased throughput spectrometer assembly to isolate the local beam fluorescence, coupled to new large-area photoconductive photodiodes; 3.) A new sharp edge interference filter designed to optimize detection of the beam emission plus a significant fraction of the thermal deuterium charge exchange. A new data acquisition system has been installed, providing an 8 times increase in integration time or an increased sample rate. Preliminary results from the upgraded system show a signal enhancement of greater than an order of magnitude. A clear broadband density fluctuation signal is observed in H-mode discharges with the upgraded BES system, demonstrating the significant performance enhancement.
△ Less
Submitted 8 May, 2008;
originally announced May 2008.
-
Dynamic Programming based Time-Delay Estimation (TDE) Technique for Analysis of Time-varying Time-delay
Authors:
Deepak K. Gupta,
George R. McKee,
Raymond R. Fonck
Abstract:
A new time-delay estimation (TDE) technique based on dynamic programming is developed, to measures the time-varying time-delay between two signals. Dynamic programming based TDE technique provides a frequency response 5 to 10 times higher than previously known TDE techniques, namely those based on time-lag cross-correlation or wavelet analysis. Effects of frequency spectrum, signal-to-noise rati…
▽ More
A new time-delay estimation (TDE) technique based on dynamic programming is developed, to measures the time-varying time-delay between two signals. Dynamic programming based TDE technique provides a frequency response 5 to 10 times higher than previously known TDE techniques, namely those based on time-lag cross-correlation or wavelet analysis. Effects of frequency spectrum, signal-to-noise ratio and amplitude of time-delay on response (represented as transfer function) of TDE technique is studied using simulated data signals. Transfer function for the technique decreases with increase in noise in signal; however it is independent of signal spectrum shape. Dynamic programming based TDE technique is applied to the Beam-Emission-Spectroscopy (BES) diagnostic data to measure poloidal velocity fluctuations, which led to the observation of theoretically predicted zonal flows in high-temperature tokamak plasmas.
△ Less
Submitted 29 December, 2009; v1 submitted 16 April, 2008;
originally announced April 2008.
-
Validation in Fusion Research: Towards Guidelines and Best Practices
Authors:
P. W. Terry,
M. Greenwald,
J. -N. Leboeuf,
G. R. McKee,
D. R. Mikkelsen,
W. M. Nevins,
D. E. Newman,
D. P. Stotler
Abstract:
Because experiment/model comparisons in magnetic confinement fusion have not yet satisfied the requirements for validation as understood broadly, a set of approaches to validating mathematical models and numerical algorithms are recommended as good practices. Previously identified procedures, such as verification, qualification, and analysis of error and uncertainty, remain important. However, p…
▽ More
Because experiment/model comparisons in magnetic confinement fusion have not yet satisfied the requirements for validation as understood broadly, a set of approaches to validating mathematical models and numerical algorithms are recommended as good practices. Previously identified procedures, such as verification, qualification, and analysis of error and uncertainty, remain important. However, particular challenges intrinsic to fusion plasmas and physical measurement therein lead to identification of new or less familiar concepts that are also critical in validation. These include the primacy hierarchy, which tracks the integration of measurable quantities, and sensitivity analysis, which assesses how model output is apportioned to different sources of variation. The use of validation metrics for individual measurements is extended to multiple measurements, with provisions for the primacy hierarchy and sensitivity. This composite validation metric is essential for quantitatively evaluating comparisons with experiments. To mount successful and credible validation in magnetic fusion, a new culture of validation is envisaged.
△ Less
Submitted 17 January, 2008;
originally announced January 2008.