-
Spin-Energy Entanglement of a Time-Focused Neutron
Authors:
J. C. Leiner,
S. J. Kuhn,
S. McKay,
J. K. Jochum,
F. Li,
A. A. M. Irfan,
F. Funama,
D. Mettus,
L. Beddrich,
C. Franz,
J. Shen,
S. R. Parnell,
R. M. Dalgliesh,
M. Loyd,
N. Geerits,
G. Ortiz,
C. Pfleiderer,
R. Pynn
Abstract:
Intra-particle entanglement of individual particles such as neutrons could enable a new class of scattering probes that are sensitive to entanglement in quantum systems and materials. In this work, we present experimental results demonstrating quantum contextuality as a result of entanglement between the spin and energy modes (i.e., degrees of freedom) of single neutrons in a beam using a pair of…
▽ More
Intra-particle entanglement of individual particles such as neutrons could enable a new class of scattering probes that are sensitive to entanglement in quantum systems and materials. In this work, we present experimental results demonstrating quantum contextuality as a result of entanglement between the spin and energy modes (i.e., degrees of freedom) of single neutrons in a beam using a pair of resonant radio-frequency neutron spin flippers in the MIEZE configuration (Modulated IntEnsity with Zero Effort). We verified the mode-entanglement by measuring a Clauser-Horne-Shimony-Holt (CHSH) contextuality witness $S$ defined in the spin and energy subsystems, observing a clear breach of the classical bound of $|S| \leq 2$, obtaining $S = 2.40 \pm 0.02$. These entangled beams could enable novel approaches for directly probing dynamics and entanglement in quantum materials whose low-energy excitation scales match those of the incident entangled neutron.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Correcting Aberrations of a Transverse-Field Neutron Resonance Spin Echo Instrument
Authors:
Stephen J. Kuhn,
Sam McKay,
Fankang Li,
Robert M. Dalgliesh,
Eric Dees,
Kaleb Burrage,
Jiazhou Shen,
Roger Pynn
Abstract:
The neutron resonance spin echo (NRSE) technique has the potential to increase the Fourier time and energy resolution in neutron scattering by using radio-frequency (rf) neutron spin-flippers. However, aberrations arising from variations in the neutron path length between the rf flippers reduce the polarization. Here, we develop and test a transverse static-field magnet, a series of which are plac…
▽ More
The neutron resonance spin echo (NRSE) technique has the potential to increase the Fourier time and energy resolution in neutron scattering by using radio-frequency (rf) neutron spin-flippers. However, aberrations arising from variations in the neutron path length between the rf flippers reduce the polarization. Here, we develop and test a transverse static-field magnet, a series of which are placed between the rf flippers, to correct for these aberrations. The prototype correction magnet was both simulated in an NRSE beamline using McStas, a Monte Carlo neutron ray-tracing software package, and measured using neutrons. The results from the prototype demonstrate that this static-field design corrects for transverse-field NRSE aberrations.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Spin-Textured Neutron Beams with Orbital Angular Momentum
Authors:
Quan Le Thien,
Sam McKay,
Roger Pynn,
Gerardo Ortiz
Abstract:
We present a rigorous theoretical framework underpinning the technique of spin-echo modulated small-angle neutron scattering (SEMSANS), and show how the technique can be extended in order to generate spin-textured neutron beams with orbital angular momentum (OAM) via birefringent neutron spin-polarization devices known as magnetic Wollaston prisms. Neutron OAM beams are mathematically characterize…
▽ More
We present a rigorous theoretical framework underpinning the technique of spin-echo modulated small-angle neutron scattering (SEMSANS), and show how the technique can be extended in order to generate spin-textured neutron beams with orbital angular momentum (OAM) via birefringent neutron spin-polarization devices known as magnetic Wollaston prisms. Neutron OAM beams are mathematically characterized by a ``cork-screw'' phase singularity $e^{i \ell φ}$ about the propagation axis where $\ell$ is the OAM quantum number. To understand the precise relationship between the emergent OAM state and the variety of spin textures realized by various setups, we have developed a path-integral approach that in the interferometric limit makes a judicious use of magnetic Snell's law. We show that our proposed technique produces a complex two-dimensional pattern of spin-OAM entangled states which may be useful as a probe of quantum magnetic materials. We compare our path-integral approach to the well-known single-path Larmor precession model and present a pedagogical derivation of magnetic Snell's law of refraction for both massive and massless particles based on Maupertuis's action principle.
△ Less
Submitted 6 April, 2023; v1 submitted 25 July, 2022;
originally announced July 2022.
-
Surface science motivated by heating of trapped ions from the quantum ground state
Authors:
D. A. Hite,
K. S. McKay,
D. P. Pappas
Abstract:
For the past two and a half decades, anomalous heating of trapped ions from nearby electrode surfaces has continued to demonstrate unexpected results. Caused by electric-field noise, this heating of the ions' motional modes remains an obstacle for scalable quantum computation with trapped ions. One of the anomalous features of this electric-field noise is the reported nonmonotonic behavior in the…
▽ More
For the past two and a half decades, anomalous heating of trapped ions from nearby electrode surfaces has continued to demonstrate unexpected results. Caused by electric-field noise, this heating of the ions' motional modes remains an obstacle for scalable quantum computation with trapped ions. One of the anomalous features of this electric-field noise is the reported nonmonotonic behavior in the heating rate when a trap is incrementally cleaned by ion bombardment. Motivated by this result, the present work reports on a surface analysis of a sample ion-trap electrode treated similarly with incremental doses of Ar$^+$ ion bombardment. Kelvin probe force microscopy and x-ray photoelectron spectroscopy were used to investigate how the work functions on the electrode surface vary depending on the residual contaminant coverage between each treatment. It is shown that the as-fabricated Au electrode is covered with a hydrocarbon film that is modified after the first treatment, resulting in work functions and core-level binding energies that resemble that of atomic-like carbon on Au. Changes in the spatial distribution of work functions with each treatment, combined with a suggested phenomenological coverage and surface-potential roughness dependence to the heating, appear to be related to the nonmonotonic behavior previously reported.
△ Less
Submitted 3 October, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Measurement of electric-field noise from interchangeable samples with a trapped-ion sensor
Authors:
Kyle S. McKay,
Dustin A. Hite,
Philip D. Kent,
Shlomi Kotler,
Dietrich Leibfried,
Daniel H. Slichter,
Andrew C. Wilson,
David P. Pappas
Abstract:
We demonstrate the use of a single trapped ion as a sensor to probe electric-field noise from interchangeable test surfaces. As proof of principle, we measure the magnitude and distance dependence of electric-field noise from two ion-trap-like samples with patterned Au electrodes. This trapped-ion sensor could be combined with other surface characterization tools to help elucidate the mechanisms t…
▽ More
We demonstrate the use of a single trapped ion as a sensor to probe electric-field noise from interchangeable test surfaces. As proof of principle, we measure the magnitude and distance dependence of electric-field noise from two ion-trap-like samples with patterned Au electrodes. This trapped-ion sensor could be combined with other surface characterization tools to help elucidate the mechanisms that give rise to electric-field noise from ion-trap surfaces. Such noise presents a significant hurdle for performing large-scale trapped-ion quantum computations.
△ Less
Submitted 10 September, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
Crystallographic orientation dependence of work function: Carbon adsorption on Au surfaces
Authors:
H. Z. Jooya,
X. Fan,
K. S. McKay,
D. P. Pappas,
D. A. Hite,
H. R. Sadeghpour
Abstract:
We investigate the work function (WF) variation of different Au crystallographic surface orientations with carbon atom adsorption. Ab-initio calculations within density-functional theory are performed on carbon deposited (100), (110), and (111) gold surfaces. The WF behavior with carbon coverage for the different surface orientations is explained by the resultant electron charge density distributi…
▽ More
We investigate the work function (WF) variation of different Au crystallographic surface orientations with carbon atom adsorption. Ab-initio calculations within density-functional theory are performed on carbon deposited (100), (110), and (111) gold surfaces. The WF behavior with carbon coverage for the different surface orientations is explained by the resultant electron charge density distributions. The dynamics of carbon adsorption at sub-to-one-monolayer (ML) coverage depends on the landscape of the potential energy surfaces. At higher ML coverage, because of adsorption saturation, the WF will have weak surface orientation dependence. This systematic study has consequential bearing on studies of electric-field noise emanating from polycrystalline gold ion-trap electrodes that have been largely employed in microfabricated electrodes.
△ Less
Submitted 28 February, 2019;
originally announced March 2019.
-
Mechanisms for carbon adsorption on Au(110)-(2*1): A work function analysis
Authors:
H. Z. Jooya,
K. S. McKay,
E. Kim,
P. F. Weck,
D. P. Pappas,
D. A. Hite,
H. R. Sadeghpour
Abstract:
The variation of the work function upon carbon adsorption on the reconstructed Au(110) surface is measured experimentally and compared to density functional calculations. The adsorption dynamics is simulated with ab-initio molecular dynamics techniques. The contribution of various energetically available adsorption sites on the deposition process is analyzed, and the work function behavior with ca…
▽ More
The variation of the work function upon carbon adsorption on the reconstructed Au(110) surface is measured experimentally and compared to density functional calculations. The adsorption dynamics is simulated with ab-initio molecular dynamics techniques. The contribution of various energetically available adsorption sites on the deposition process is analyzed, and the work function behavior with carbon coverage is explained by the resultant electron charge density distributions.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Measurements of trapped-ion heating rates with exchangeable surfaces in close proximity
Authors:
D. A. Hite,
K. S. McKay,
S. Kotler,
D. Leibfried,
D. J. Wineland,
D. P. Pappas
Abstract:
Electric-field noise from the surfaces of ion-trap electrodes couples to the ion's charge causing heating of the ion's motional modes. This heating limits the fidelity of quantum gates implemented in quantum information processing experiments. The exact mechanism that gives rise to electric-field noise from surfaces is not well-understood and remains an active area of research. In this work, we de…
▽ More
Electric-field noise from the surfaces of ion-trap electrodes couples to the ion's charge causing heating of the ion's motional modes. This heating limits the fidelity of quantum gates implemented in quantum information processing experiments. The exact mechanism that gives rise to electric-field noise from surfaces is not well-understood and remains an active area of research. In this work, we detail experiments intended to measure ion motional heating rates with exchangeable surfaces positioned in close proximity to the ion, as a sensor to electric-field noise. We have prepared samples with various surface conditions, characterized in situ with scanned probe microscopy and electron spectroscopy, ranging in degrees of cleanliness and structural order. The heating-rate data, however, show no significant differences between the disparate surfaces that were probed. These results suggest that the driving mechanism for electric-field noise from surfaces is due to more than just thermal excitations alone.
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
Electric-field noise from carbon-adatom diffusion on a Au(110) surface: first-principles calculations and experiments
Authors:
E. Kim,
A. Safavi-Naini,
D. A. Hite,
K. S. McKay,
D. P. Pappas,
P. F. Weck,
H. R. Sadeghpour
Abstract:
The decoherence of trapped-ion quantum gates due to heating of their motional modes is a fundamental science and engineering problem. This heating is attributed to electric-field noise arising from the trap-electrode surfaces. In this work, we investigate the source of this noise by focusing on the diffusion of carbon-containing adsorbates on the surface of Au(110). We show by density functional t…
▽ More
The decoherence of trapped-ion quantum gates due to heating of their motional modes is a fundamental science and engineering problem. This heating is attributed to electric-field noise arising from the trap-electrode surfaces. In this work, we investigate the source of this noise by focusing on the diffusion of carbon-containing adsorbates on the surface of Au(110). We show by density functional theory, based on detailed scanning probe microscopy, how the carbon adatom diffusion on the gold surface changes the energy landscape, and how the adatom dipole moment varies with the diffusive motion. A simple model for the diffusion noise, which varies quadratically with the variation of the dipole moment, qualitatively reproduces the measured noise spectrum, and the estimate of the noise spectral density is in accord with measured values.
△ Less
Submitted 12 October, 2016; v1 submitted 4 October, 2016;
originally announced October 2016.
-
Ion-trap electrode preparation with Ne$^+$ bombardment
Authors:
K. S. McKay,
D. A. Hite,
Y. Colombe,
R. Jördens,
A. C. Wilson,
D. H. Slichter,
D. T. C. Allcock,
D. Leibfried,
D. J. Wineland,
D. P. Pappas
Abstract:
We describe an ex-situ surface-cleaning procedure that is shown to reduce motional heating from ion-trap electrodes. This precleaning treatment, to be implemented immediately before the final assembly and vacuum processing of ion traps, removes surface contaminants remaining after the electrode-fabrication process. We incorporate a multi-angle ion-bombardment treatment intended to clean the electr…
▽ More
We describe an ex-situ surface-cleaning procedure that is shown to reduce motional heating from ion-trap electrodes. This precleaning treatment, to be implemented immediately before the final assembly and vacuum processing of ion traps, removes surface contaminants remaining after the electrode-fabrication process. We incorporate a multi-angle ion-bombardment treatment intended to clean the electrode surfaces and interelectrode gaps of microfabricated traps. This procedure helps to minimize redeposition in the gaps between electrodes that can cause electrical shorts. We report heating rates in a stylus-type ion trap prepared in this way that are lower by one order of magnitude compared to a similar untreated stylus-type trap using the same experimental setup.
△ Less
Submitted 6 June, 2014;
originally announced June 2014.
-
Single-photon detection timing jitter in a visible light photon counter
Authors:
Burm Baek,
Kyle S. McKay,
Martin J. Stevens,
Jungsang Kim,
Henry H. Hogue,
Sae Woo Nam
Abstract:
Visible light photon counters (VLPCs) offer many attractive features as photon detectors, such as high quantum efficiency and photon number resolution. We report measurements of the single-photon timing jitter in a VLPC, a critical performance factor in a time-correlated single-photon counting measurement, in a fiber-coupled closed-cycle cryocooler. The measured timing jitter is 240 ps full-widt…
▽ More
Visible light photon counters (VLPCs) offer many attractive features as photon detectors, such as high quantum efficiency and photon number resolution. We report measurements of the single-photon timing jitter in a VLPC, a critical performance factor in a time-correlated single-photon counting measurement, in a fiber-coupled closed-cycle cryocooler. The measured timing jitter is 240 ps full-width-at-half-maximum at a wavelength of 550 nm, with a dark count rate of 25 000 counts per second. The timing jitter increases modestly at longer wavelengths to 300 ps at 1000 nm, and increases substantially at lower bias voltages as the quantum efficiency is reduced.
△ Less
Submitted 27 January, 2010; v1 submitted 30 November, 2009;
originally announced November 2009.
-
Making Sense of the Legendre Transform
Authors:
R. K. P. Zia,
Edward F. Redish,
Susan R. McKay
Abstract:
The Legendre transform is an important tool in theoretical physics, playing a critical role in classical mechanics, statistical mechanics, and thermodynamics. Yet, in typical undergraduate or graduate courses, the power of motivation and elegance of the method are often missing, unlike the treatments frequently enjoyed by Fourier transforms. We review and modify the presentation of Legendre tran…
▽ More
The Legendre transform is an important tool in theoretical physics, playing a critical role in classical mechanics, statistical mechanics, and thermodynamics. Yet, in typical undergraduate or graduate courses, the power of motivation and elegance of the method are often missing, unlike the treatments frequently enjoyed by Fourier transforms. We review and modify the presentation of Legendre transforms in a way that explicates the formal mathematics, resulting in manifestly symmetric equations, thereby clarifying the structure of the transform algebraically and geometrically. Then we bring in the physics to motivate the transform as a way of choosing independent variables that are more easily controlled. We demonstrate how the Legendre transform arises naturally from statistical mechanics and show how the use of dimensionless thermodynamic potentials leads to more natural and symmetric relations.
△ Less
Submitted 4 March, 2009; v1 submitted 6 June, 2008;
originally announced June 2008.