-
Using Old Laboratory Equipment with Modern Web-of-Things Standards: a Smart Laboratory with LabThings Retro
Authors:
Samuel McDermott,
Jurij Kotar,
Joel Collins,
Leonardo Mancini,
Richard Bowman,
Pietro Cicuta
Abstract:
There has been an increasing, and welcome, Open Hardware trend towards science teams building and sharing their designs for new instruments. These devices, often built upon low-cost microprocessors and micro-controllers, can be readily connected to enable complex, automated, and smart experiments. When designed to use open communication web standards, devices from different laboratories and manufa…
▽ More
There has been an increasing, and welcome, Open Hardware trend towards science teams building and sharing their designs for new instruments. These devices, often built upon low-cost microprocessors and micro-controllers, can be readily connected to enable complex, automated, and smart experiments. When designed to use open communication web standards, devices from different laboratories and manufacturers can be controlled using a single protocol, and even communicate with each other. However, science labs still have a majority of old, perfectly functional, equipment which tends to use older, and sometimes proprietary, standards for communications. In order to encourage the continued and integrated use of this equipment in modern automated experiments, we develop and demonstrate LabThings Retro. This allows us to retrofit old instruments to use modern web-of-things standards, which we demonstrate with closed-loop feedback involving an optical microscope, digital imaging and fluid pum**.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Phosphorus-Controlled Nanoepitaxy in the Asymmetric Growth of GaAs-InP Core-Shell Bent Nanowires
Authors:
Spencer McDermott,
Trevor R. Smith,
Ray R. LaPierre,
Ryan B. Lewis
Abstract:
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymme…
▽ More
Breakthroughs extending nanostructure engineering beyond what is possible with current fabrication techniques will be crucial for enabling next-generation nanotechnologies. Nanoepitaxy of strain-engineered bent nanowire heterostructures presents a promising platform for realizing bottom-up and scalable fabrication of nanowire devices. The synthesis of these structures requires the selective asymmetric deposition of lattice-mismatched shells-a complex growth process which is not well understood. We present the nanoepitaxial growth of GaAs-InP core-shell bent nanowires and connecting nanowire pairs to form nano-arches. Compositional analysis of nanowire cross-sections reveals the critical role of adatom diffusion in the nanoepitaxial growth process, which leads to two distinct growth regimes: indium-diffusion limited growth and phosphorous-limited growth. The highly controllable phosphorous-limited growth mode is employed to synthesize connected nanowire pairs and quantify the role of flux shadowing on the shell growth process. These results provide important insight into three-dimensional nanoepitaxy and enable new possibilities for nanowire device fabrication.
△ Less
Submitted 14 May, 2023; v1 submitted 12 May, 2023;
originally announced May 2023.
-
Controlling and scripting laboratory hardware with open-source, intuitive interfaces: OpenFlexure Voice Control and OpenFlexure Blockly
Authors:
Samuel McDermott,
Richard Bowman,
Kerrianne Harrington,
William Wadsworth,
Pietro Cicuta
Abstract:
Making user interaction with laboratory equipment more convenient and intuitive should promote experimental work and help researchers to complete their tasks efficiently. The most common form of interaction in current instrumentation is either direct tactile, with buttons and knobs, or interfaced through a computer, using a mouse and keyboard. Scripting is another function typical of smart and aut…
▽ More
Making user interaction with laboratory equipment more convenient and intuitive should promote experimental work and help researchers to complete their tasks efficiently. The most common form of interaction in current instrumentation is either direct tactile, with buttons and knobs, or interfaced through a computer, using a mouse and keyboard. Scripting is another function typical of smart and automated laboratory equipment, yet users are currently required to learn bespoke programming languages and libraries for individual pieces of equipment. In this paper, we present two open-source, novel and intuitive ways of interacting with and scripting laboratory equipment. We choose the OpenFlexure family of microscopes as our exemplar, due to their open-source nature and smart control system. Firstly, we demonstrate 'OpenFlexure Voice Control' to enable users to control the microscope hands-free. Secondly, we present 'OpenFlexure Blockly' which uses the Blockly Visual Programming Language to enable users to easily create scripts for the microscope, using a drag and drop web interface. We explain the design choices when develo** these tools, and discuss more typical use cases and more general applications.
△ Less
Submitted 2 February, 2023; v1 submitted 29 September, 2022;
originally announced September 2022.
-
Multi-modal microscopy imaging with the OpenFlexure Delta Stage
Authors:
Samuel McDermott,
Filip Ayazi,
Joel Collins,
Joe Knapper,
Julian Stirling,
Richard Bowman,
Pietro Cicuta
Abstract:
Microscopes are vital pieces of equipment in much of biological research and medical diagnostics. However, access to a microscope can represent a bottleneck in research, especially in lower-income countries. `Smart' computer controlled motorized microscopes, which can perform automated routines or acquire images in a range of modalities are even more expensive and inaccessible. Develo** low-cost…
▽ More
Microscopes are vital pieces of equipment in much of biological research and medical diagnostics. However, access to a microscope can represent a bottleneck in research, especially in lower-income countries. `Smart' computer controlled motorized microscopes, which can perform automated routines or acquire images in a range of modalities are even more expensive and inaccessible. Develo** low-cost, open-source, smart microscopes enables more researchers to conceive and execute optimized or more complex experiments. Here we present the OpenFlexure Delta Stage, a 3D-printed microscope designed for researchers. Powered by the OpenFlexure software stack, it is capable of performing automated experiments. The design files and assembly instructions are freely available under an open licence. Its intuitive and modular design -- along with detailed documentation -- allows researchers to implement a variety of imaging modes with ease. The versatility of this microscope is demonstrated by imaging biological and non-biological samples (red blood cells with Plasmodium parasites and colloidal particles in brightfield, epi-fluorescence, darkfield, Rheinberg and differential phase contrast. We present the design strategy and choice of tools to develop devices accessible to researchers from lower-income countries, as well as the advantages of an open-source project in this context. This microscope, having been open-source since its conception, has already been built and tested by researchers around the world, promoting a community of expertise and an environment of reproducibility in science.
△ Less
Submitted 30 June, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
autohaem: 3D printed devices for automated preparation of blood smears
Authors:
Samuel McDermott,
Jaehyeon Kim,
Aikaterini Anna Leledaki,
Duncan Parry,
Louis Lee,
Alexandre Kabla,
Catherine Mkindi,
Richard Bowman,
Pietro Cicuta
Abstract:
The process of making blood smears is common in both research and clinical settings, for investigating the health of blood cells and the presence of blood-borne parasites. It is very often carried out manually. We focus here on smears for malaria diagnosis and research which are frequently analyzed by optical microscopy and require a high quality. Automating the smear preparation promises to incre…
▽ More
The process of making blood smears is common in both research and clinical settings, for investigating the health of blood cells and the presence of blood-borne parasites. It is very often carried out manually. We focus here on smears for malaria diagnosis and research which are frequently analyzed by optical microscopy and require a high quality. Automating the smear preparation promises to increase throughput and to improve the quality and consistency of the smears. We present here two devices (manual and motorized) designed to aid in the making of blood smears. These are fully documented, open-source hardware, and an important principle was to make them easily fabricated locally anywhere. Designs and assembly instructions are freely available under an open license. We also describe an image analysis pipeline for characterizing the quality of smears, and use it to optimize the settings and tunable parameters in the two devices. The devices perform as well as expert human operators, while not requiring a trained operator and offering potential advantages in reproducibility and standardization across facilities.
△ Less
Submitted 18 January, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Fast, high precision autofocus on a motorised microscope: automating blood sample imaging on the OpenFlexure Microscope
Authors:
Joe Knapper,
Joel T. Collins,
Julian Stirling,
Samuel McDermott,
William Wadsworth,
Richard Bowman
Abstract:
The OpenFlexure Microscope is a 3D printed, low-cost microscope capable of automated image acquisition through the use of a motorised translation stage and a Raspberry Pi imaging system. This automation has applications in research and healthcare, including in supporting the diagnosis of malaria in low resource settings. The plasmodium parasites which cause malaria require high magnification imagi…
▽ More
The OpenFlexure Microscope is a 3D printed, low-cost microscope capable of automated image acquisition through the use of a motorised translation stage and a Raspberry Pi imaging system. This automation has applications in research and healthcare, including in supporting the diagnosis of malaria in low resource settings. The plasmodium parasites which cause malaria require high magnification imaging, which has a shallow depth of field, necessitating the development of an accurate and precise autofocus procedure. We present methods of identifying the focal plane of the microscope, and procedures for reliably acquiring a stack of focused images on a system affected by backlash and drift. We also present and assess a method to verify the success of autofocus during the scan. The speed, reliability and precision of each method is evaluated, and the limitations discussed in terms of the end users' requirements.
△ Less
Submitted 15 September, 2021; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Bending of core-shell nanowires by asymmetric shell deposition
Authors:
Spencer W. McDermott,
Ryan B. Lewis
Abstract:
Freestanding semiconductor nanowires have opened up new possibilities for semiconductor devices, enabling geometries, material combinations and strain states which were not previously possible. Along these lines, spontaneous bending in asymmetric core-shell nanowire heterostructures has recently been proposed as a means to realize previously unimagined device geometries, novel strain-gradient engi…
▽ More
Freestanding semiconductor nanowires have opened up new possibilities for semiconductor devices, enabling geometries, material combinations and strain states which were not previously possible. Along these lines, spontaneous bending in asymmetric core-shell nanowire heterostructures has recently been proposed as a means to realize previously unimagined device geometries, novel strain-gradient engineering and bottom-up device fabrication. The synthesis of these nanostructures exploits the nanowire geometry and the directionality of the shell deposition process. Here, we explore the underlying mechanisms of this bending process by modeling the evolution of nanowires during asymmetric shell deposition. We show how bending can lead to dramatic local shell thickness, curvature and strain variations along the length of the nanowire, and we elucidate the dependence of shell growth and bending on parameters such as the core and shell dimensions and materials, and angle of incidence of the deposition source. In addition, deposition shadowing by neighboring nanowires is explored. We show that shadowing can easily be employed to connect nanowire pairs, which could be used to fabricate novel nanowire sensors. Model results are compared with GaAs-InP and GaAs-(Al,In)As core-shell nanowire growth experiments. These results can be used to guide future experiments and to help pave the way to bent nanowire devices.
△ Less
Submitted 27 July, 2021; v1 submitted 5 May, 2021;
originally announced May 2021.
-
Dark Matter Daily Modulation With Anisotropic Organic Crystals
Authors:
Carlos Blanco,
Yonatan Kahn,
Benjamin Lillard,
Samuel D. McDermott
Abstract:
Aromatic organic compounds, because of their small excitation energies ~ O(few eV) and scintillating properties, are promising targets for detecting dark matter of mass ~ O(few MeV). Additionally, their planar molecular structures lead to large anisotropies in the electronic wavefunctions, yielding a significant daily modulation in the event rate expected to be observed in crystals of these molecu…
▽ More
Aromatic organic compounds, because of their small excitation energies ~ O(few eV) and scintillating properties, are promising targets for detecting dark matter of mass ~ O(few MeV). Additionally, their planar molecular structures lead to large anisotropies in the electronic wavefunctions, yielding a significant daily modulation in the event rate expected to be observed in crystals of these molecules. We characterize the daily modulation rate of dark matter interacting with an anisotropic scintillating organic crystal such as trans-stilbene, and show that daily modulation is an ~ O(1) fraction of the total rate for small DM masses and comparable to, or larger than, the ~ 10% annual modulation fraction at large DM masses. As we discuss in detail, this modulation provides significant leverage for detecting or excluding dark matter scattering, even in the presence of a non-negligible background rate. Assuming a non-modulating background rate of 1/min/kg that scales with total exposure, we find that a 100 kg yr experiment is sensitive to the cross section corresponding to the correct relic density for dark matter masses between 1.3-14 MeV (1.5-1000 MeV) if dark matter interacts via a heavy (light) mediator. This modulation can be understood using an effective velocity scale v* = Delta E/q*, where Delta E is the electronic transition energy and q* is a characteristic momentum scale of the electronic orbitals. We also characterize promising future directions for development of scintillating organic crystals as dark matter detectors.
△ Less
Submitted 13 September, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Modern Microscopy with the Web of Things: The OpenFlexure Microscope Software Stack
Authors:
Joel T. Collins,
Joe Knapper,
Julian Stirling,
Samuel McDermott,
Richard Bowman
Abstract:
Automated and computerised control of scientific instrumentation is almost ubiquitous in the modern laboratory. Most instrumentation is controlled over decades old communication busses or is accessed via proprietary system libraries. This limits which languages and operating systems can be used to control instruments, and poses a significant problem when interfacing multiple instruments into the s…
▽ More
Automated and computerised control of scientific instrumentation is almost ubiquitous in the modern laboratory. Most instrumentation is controlled over decades old communication busses or is accessed via proprietary system libraries. This limits which languages and operating systems can be used to control instruments, and poses a significant problem when interfacing multiple instruments into the same experiment. Here we present the OpenFlexure Microscope software stack as an example of how a scientific instrument can be controlled using existing, cross-platform, language-independent, industry-supported standards. We split the control code into client and server applications interfaced via a web API that conforms to the W3C Web of Things standard. This enables simple control of the microscope from multiple languages, provides a modern graphical control interface, and minimises duplicated code. Network control also makes the software stack more robust, allows multiple microscopes to be controlled by one computer, and facilitates sharing of equipment between local or remote users. Using a Web of Things approach in research laboratories has the potential to solve many of the key challenges of experiment integration, using technology that is already well established.
△ Less
Submitted 28 September, 2021; v1 submitted 4 January, 2021;
originally announced January 2021.