-
A mesh-constrained discrete point method for incompressible flows with moving boundaries
Authors:
Takeharu Matsuda,
Satoshi Ii
Abstract:
Particle-based methods are a practical tool in computational fluid dynamics, and novel types of methods have been proposed. However, widely developed Lagrangian-type formulations suffer from the nonuniform distribution of particles, which is enhanced over time and result in problems in computational efficiency and parallel computations. To mitigate these problems, a mesh-constrained discrete point…
▽ More
Particle-based methods are a practical tool in computational fluid dynamics, and novel types of methods have been proposed. However, widely developed Lagrangian-type formulations suffer from the nonuniform distribution of particles, which is enhanced over time and result in problems in computational efficiency and parallel computations. To mitigate these problems, a mesh-constrained discrete point (MCD) method was developed for stationary boundary problems (Matsuda et al., 2022). Although the MCD method is a meshless method that uses moving least-squares approximation, the arrangement of particles (or discrete points (DPs)) is specialized so that their positions are constrained in background meshes to obtain a closely uniform distribution. This achieves a reasonable approximation for spatial derivatives with compact stencils without encountering any ill-posed condition and leads to good performance in terms of computational efficiency. In this study, a novel meshless method based on the MCD method for incompressible flows with moving boundaries is proposed. To ensure the mesh constraint of each DP in moving boundary problems, a novel updating algorithm for the DP arrangement is developed so that the position of DPs is not only rearranged but the DPs are also reassigned the role of being on the boundary or not. The proposed method achieved reasonable results in numerical experiments for well-known moving boundary problems.
△ Less
Submitted 11 June, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Modelling the discretization error of initial value problems using the Wishart distribution
Authors:
Naoki Marumo,
Takeru Matsuda,
Yuto Miyatake
Abstract:
This paper presents a new discretization error quantification method for the numerical integration of ordinary differential equations. The error is modelled by using the Wishart distribution, which enables us to capture the correlation between variables. Error quantification is achieved by solving an optimization problem under the order constraints for the covariance matrices. An algorithm for the…
▽ More
This paper presents a new discretization error quantification method for the numerical integration of ordinary differential equations. The error is modelled by using the Wishart distribution, which enables us to capture the correlation between variables. Error quantification is achieved by solving an optimization problem under the order constraints for the covariance matrices. An algorithm for the optimization problem is also established in a slightly broader context.
△ Less
Submitted 14 August, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
A novel technique for the measurement of the avalanche fluctuations of a GEM stack using a gating foil
Authors:
M. Kobayashi,
K. Yumino,
T. Ogawa,
A. Shoji,
Y. Aoki,
K. Ikematsu,
P. Gros,
T. Kawaguchi,
D. Arai,
M. Iwamura,
K. Katsuki,
A. Koto,
M. Yoshikai,
K. Fujii,
T. Fusayasu,
Y. Kato,
S. Kawada,
T. Matsuda,
T. Mizuno,
J. Nakajima,
S. Narita,
K. Negishi,
H. Qi,
R. D. Settles,
A. Sugiyama
, et al. (4 additional authors not shown)
Abstract:
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplificatio…
▽ More
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplification. The signal charge width and shape (skewness) for electron-ion pairs created by a pulsed UV laser as a function of the transmission rate of the gating foil can be used to determine the relative variance of gas gain for single electrons. We present the measurement principle and the result obtained using a stack of gas electron multipliers (GEMs) operated in a gas mixture of Ar-CF$_4$(3%)-isobutane(2%) at atmospheric pressure. Also discussed is the influence of the avalanche fluctuations on the spatial resolution of the ILD-TPC.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
A particle-based method using the mesh-constrained discrete point approach for two-dimensional Stokes flows
Authors:
Takeharu Matsuda,
Kohsuke Tsukui,
Satoshi Ii
Abstract:
Meshless methods inherently do not require mesh topologies and are practically used for solving continuum equations. However, these methods generally tend to have a higher computational load than conventional mesh-based methods because calculation stencils for spatial discretization become large. In this study, a novel approach for the use of compact stencils in meshless methods is proposed, calle…
▽ More
Meshless methods inherently do not require mesh topologies and are practically used for solving continuum equations. However, these methods generally tend to have a higher computational load than conventional mesh-based methods because calculation stencils for spatial discretization become large. In this study, a novel approach for the use of compact stencils in meshless methods is proposed, called the mesh-constrained discrete point (MCD) approach. The MCD approach introduces a Cartesian mesh system to the background of a domain. And the approach rigorously constrains the distribution of discrete points (DPs) in each mesh by solving a dynamic problem with nonlinear constraints. This can avoid the heterogeneity of the DP distribution at the mesh-size level and impose compact stencils with a fixed degree of freedom for derivative evaluations. A fundamental formulation for arrangements of DPs and an application to unsteady Stokes flows are presented in this paper. Numerical tests were performed for the distribution of DPs and flow problems in co-axial and eccentric circular channels. The proposed MCD approach achieved a reasonable distribution of DPs independently of the spatial resolution with a few iterations in pre-processing. Additionally, solutions using the obtained DP distributions in Stokes flow problems were in good agreement with theoretical and reference solutions. The results also confirmed that the numerical accuracies of velocity and pressure achieved the expected convergence order, even when compact stencils were used.
△ Less
Submitted 28 August, 2022; v1 submitted 16 May, 2022;
originally announced June 2022.
-
Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout
Authors:
Yumi Aoki,
David Attié,
Ties Behnke,
Alain Bellerive,
Oleg Bezshyyko,
Deb Bhattacharya Sankar,
Purba Bhattacharya,
Sudeb Bhattacharya,
Yue Chang,
Paul Colas,
Gilles De Lentdecker,
Klaus Dehmelt,
Klaus Desch,
Ralf Diener,
Madhu Dixit,
Ulrich Einhaus,
Oleksiy Fedorchuk,
Ivor Fleck,
Keisuke Fujii,
Takahiro Fusayasu,
Serguei Ganjour,
Philippe Gros,
Peter Hayman,
Katsumasa Ikematsu,
Leif Jönsson
, et al. (46 additional authors not shown)
Abstract:
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field…
▽ More
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx.
△ Less
Submitted 25 November, 2022; v1 submitted 24 May, 2022;
originally announced May 2022.
-
Two-dimensional Ultrasound Imaging Technique based on Neural Network using Acoustic Simulation
Authors:
Yoshiki Nagatani,
Shigeaki Okumura,
Shuqiong Wu,
Tetsuya Matsuda
Abstract:
The two-dimensional (2D) ultrasound imaging is widely used in several fields. In this study, the potential of two-dimensional ultrasound imaging technique based on machine learning is shown. A line transmitter was placed at one side and a receiver array was placed at the opposite side of the medium, respectively. The received signals at the receiver array was considered as a 2D image and it was co…
▽ More
The two-dimensional (2D) ultrasound imaging is widely used in several fields. In this study, the potential of two-dimensional ultrasound imaging technique based on machine learning is shown. A line transmitter was placed at one side and a receiver array was placed at the opposite side of the medium, respectively. The received signals at the receiver array was considered as a 2D image and it was converted to a 2D geometry of the target medium using convolutional neural network (CNN). The results of the numerical simulation studies which use up to 40000 simulation data showed the good agreement between the estimated and true geometry.
△ Less
Submitted 19 April, 2020;
originally announced April 2020.
-
Measurement of the electron transmission rate of the gating foil for the TPC of the ILC experiment
Authors:
M. Kobayashi,
T. Ogawa,
A. Shoji,
Y. Aoki,
K. Ikematsu,
P. Gros,
T. Kawaguchi,
D. Arai,
M. Iwamura,
K. Katsuki,
A. Koto,
M. Yoshikai,
K. Fujii,
T. Fusayasu,
Y. Kato,
S. Kawada,
T. Matsuda,
S. Narita,
K. Negishi,
H. Qi,
R. D. Settles,
A. Sugiyama,
T. Takahashi,
J. Tian,
T. Watanabe
, et al. (1 additional authors not shown)
Abstract:
We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltag…
▽ More
We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltages applied across the foil using an $^{55}$Fe source and a laser in the absence of a magnetic field. The blocking power of the foil against positive ions was estimated from the electron transmissions.
△ Less
Submitted 1 May, 2019; v1 submitted 5 March, 2019;
originally announced March 2019.
-
Sparse Elasticity Reconstruction and Clustering using Local Displacement Fields
Authors:
Megumi Nakao,
Mitsuki Morita,
Tetsuya Matsuda
Abstract:
This paper introduces an elasticity reconstruction method based on local displacement observations of elastic bodies. Sparse reconstruction theory is applied to formulate the underdetermined inverse problems of elasticity reconstruction including unobserved areas. An online local clustering scheme called a superelement is proposed to reduce the number of dimensions of the optimization parameters.…
▽ More
This paper introduces an elasticity reconstruction method based on local displacement observations of elastic bodies. Sparse reconstruction theory is applied to formulate the underdetermined inverse problems of elasticity reconstruction including unobserved areas. An online local clustering scheme called a superelement is proposed to reduce the number of dimensions of the optimization parameters. Alternating the optimization of element boundaries and elasticity parameters enables the elasticity distribution to be estimated with a higher spatial resolution. The simulation experiments show that elasticity distribution is reconstructed based on observations of approximately 10% of the total body. The estimation error was improved when considering the sparseness of the elasticity distribution.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Measurements of tropospheric ice clouds with a ground-based CMB polarization experiment, POLARBEAR
Authors:
Satoru Takakura,
Mario A. O. Aguilar-Faúndez,
Yoshiki Akiba,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Dominic Beck,
Federico Bianchini,
David Boettger,
Julian Borrill,
Kolen Cheung,
Yuji Chinone,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Chang Feng,
Neil Goeckner-Wald,
Takaho Hamada,
Masaya Hasegawa,
Masashi Hazumi,
Logan Howe,
Daisuke Kaneko,
Nobuhiko Katayama,
Brian Keating,
Reijo Keskitalo
, et al. (23 additional authors not shown)
Abstract:
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the A…
▽ More
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the Atacama desert in Chile and observing at 150 GHz. We observe horizontally-polarized temporal increases of low-frequency fluctuations ("polarized bursts," hereafter) of $\lesssim$0.1 K when clouds appear in a webcam monitoring the telescope and the sky. The hypothesis of no correlation between polarized bursts and clouds is rejected with $>$24$σ$ statistical significance using three years of data. We consider many other possibilities including instrumental and environmental effects, and find no other reasons other than clouds that can explain the data better. We also discuss the impact of the cloud polarization on future ground-based CMB polarization experiments.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Authors:
Patricio A. Gallardo,
Jon Gudmundsson,
Brian J. Koopman,
Frederick T. Matsuda,
Sara M. Simon,
Aamir Ali,
Sean Bryan,
Yuji Chinone,
Gabriele Coppi,
Nicholas Cothard,
Mark J. Devlin,
Simon Dicker,
Giulio Fabbian,
Nicholas Galitzki,
Charles A. Hill,
Brian Keating,
Akito Kusaka,
Jacob Lashner,
Adrian T. Lee,
Michele Limon,
Philip D. Mauskopf,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
John L. Orlowski-Scherer
, et al. (10 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i…
▽ More
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
A novel technique for the measurement of the avalanche fluctuation of gaseous detectors
Authors:
Makoto Kobayashi,
Tomohisa Ogawa,
Tomohiko Kawaguchi,
Keisuke Fujii,
Takahiro Fusayasu,
Katsumasa Ikematsu,
Yukihiro Kato,
Shin-ichi Kawada,
Takeshi Matsuda,
Ronald Dean Settles,
Akira Sugiyama,
Tohru Takahashi,
Jun** Tian,
Takashi Watanabe,
Ryo Yonamine
Abstract:
We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs…
▽ More
We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs) operated in several gas mixtures are presented.
△ Less
Submitted 21 March, 2023; v1 submitted 3 July, 2016;
originally announced July 2016.
-
A Time Projection Chamber with GEM-Based Readout
Authors:
The LCTPC Collaboration,
David Attié,
Ties Behnke,
Alain Bellerive,
Oleg Bezshyyko,
Deb Sankar Bhattacharya,
Purba Bhattacharya,
Sudeb Bhattacharya,
Stefano Caiazza,
Paul Colas,
Gilles De Lentdecker,
Klaus Dehmelt,
Klaus Desch,
Ralf Diener,
Madhu Dixit,
Ivor Fleck,
Keisuke Fujii,
Takahiro Fusayasu,
Serguei Ganjour,
Yuanning Gao,
Philippe Gros,
Peter Hayman,
Vincent Hedberg,
Katsumasa Ikematsu,
Leif Jönsson
, et al. (45 additional authors not shown)
Abstract:
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a…
▽ More
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
Confusion around the tidal force and the centrifugal force
Authors:
Takuya Matsuda,
Hiromu Isaka,
Henri M. J. Boffin
Abstract:
We discuss the tidal force, whose notion is sometimes misunderstood in the public domain literature. We discuss the tidal force exerted by a secondary point mass on an extended primary body such as the Earth. The tidal force arises because the gravitational force exerted on the extended body by the secondary mass is not uniform across the primary. In the derivation of the tidal force, the non-unif…
▽ More
We discuss the tidal force, whose notion is sometimes misunderstood in the public domain literature. We discuss the tidal force exerted by a secondary point mass on an extended primary body such as the Earth. The tidal force arises because the gravitational force exerted on the extended body by the secondary mass is not uniform across the primary. In the derivation of the tidal force, the non-uniformity of the gravity is essential, and inertial forces such as the centrifugal force are not needed. Nevertheless, it is often asserted that the tidal force can be explained by the centrifugal force. If we literally take into account the centrifugal force, it would mislead us. We therefore also discuss the proper treatment of the centrifugal force.
△ Less
Submitted 7 June, 2015;
originally announced June 2015.
-
The COMPASS Setup for Physics with Hadron Beams
Authors:
Ph. Abbon,
C. Adolph,
R. Akhunzyanov,
Yu. Alexandrov,
M. G. Alexeev,
G. D. Alexeev,
A. Amoroso,
V. Andrieux,
V. Anosov,
A. Austregesilo,
B. Badelek,
F. Balestra,
J. Barth,
G. Baum,
R. Beck,
Y. Bedfer,
A. Berlin,
J. Bernhard,
K. Bicker,
E. R. Bielert,
J. Bieling,
R. Birsa,
J. Bisplinghoff,
M. Bodlak,
M. Boer
, et al. (207 additional authors not shown)
Abstract:
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well…
▽ More
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successfully used with positive and negative hadron beams and with liquid hydrogen and solid nuclear targets. This article describes the new and upgraded detectors and auxiliary equipment, outlines the reconstruction procedures used, and summarises the general performance of the setup.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Incidence Angle and Polarization Dependence of Photo-Induced FMR in Co/Pd Multilayers
Authors:
J. Saeki,
K. Nishibayashi,
T. Matsuda,
Y. Kitamoto,
H. Munekata
Abstract:
Dependence of photo-induced FMR (phi-FMR) on incident angle of excitation and probing laser beams has been studied in a [Co (dCo = 0.78 nm) / Pd (dPd = 0.81 nm) ]5 multi-layer film with the aim to find experimentally the limitation of inducement and detection of magnetization dynamics with oblique light incidence. We have found, in the experiments changing the incident angle of a pump beam, that p…
▽ More
Dependence of photo-induced FMR (phi-FMR) on incident angle of excitation and probing laser beams has been studied in a [Co (dCo = 0.78 nm) / Pd (dPd = 0.81 nm) ]5 multi-layer film with the aim to find experimentally the limitation of inducement and detection of magnetization dynamics with oblique light incidence. We have found, in the experiments changing the incident angle of a pump beam, that phi-FMR is observed up to the grazing incident angle of 88 degrees with p-polarized excitation pulses, whereas it disappears at the incidence angle of around 65 degrees with s-polarized excitation. As for the experiments changing the incident angle of a probe beam, phi-FMR disappears at the incidence angle of 65 degrees for both s- and p-polarizations, whereas it reappears with further increasing the angle for the p-polarization and vanishes at 75 degrees.
△ Less
Submitted 16 April, 2014;
originally announced April 2014.
-
Cosmic ray tests of a GEM-based TPC prototype operated in Ar-CF4-isobutane gas mixtures: II
Authors:
M. Kobayashi,
R. Yonamine,
T. Tomioka,
A. Aoza,
H. Bito,
K. Fujii,
T. Higashi,
K. Hiramatsu,
K. Ikematsu,
A. Ishikawa,
Y. Kato,
H. Kuroiwa,
T. Matsuda,
O. Nitoh,
H. Ohta,
K. Sakai,
R. D. Settles,
A. Sugiyama,
H. Tsuji,
T. Watanabe,
H. Yamaoka,
T. Yazu
Abstract:
The spatial resolution along the pad-row direction was measured with a GEM-based TPC prototype for the future linear collider experiment in order to understand its performance for tracks with finite projected angles with respect to the pad-row normal. The degradation of the resolution due to the angular pad effect was confirmed to be consistent with the prediction of a simple calculation taking in…
▽ More
The spatial resolution along the pad-row direction was measured with a GEM-based TPC prototype for the future linear collider experiment in order to understand its performance for tracks with finite projected angles with respect to the pad-row normal. The degradation of the resolution due to the angular pad effect was confirmed to be consistent with the prediction of a simple calculation taking into account the cluster-size distribution and the avalanche fluctuation.
△ Less
Submitted 3 April, 2014;
originally announced April 2014.
-
Activity report of ILD-TPC Asia group
Authors:
Y. Kato,
R. Yonamine,
P. Gros,
J. Tian,
S. Kawada,
K. Fujii,
T. Matsuda,
A. Sugiyama,
O. Nitoh,
T. Watanabe,
T. Fusayasu,
T. Takahashi,
M. Kobayashi
Abstract:
The purpose of ILD-TPC Asia group is realization of high precision Time Projection Chamber (TPC) with Gas Electron Multiplier (GEM) as a central tracker in International Linear Collider (ILC). We have been studying the many R&D items to build the real detector as a member of LCTPC collaboration. This paper describes the our efforts for realization of the ILD-TPC, the result of test beam using larg…
▽ More
The purpose of ILD-TPC Asia group is realization of high precision Time Projection Chamber (TPC) with Gas Electron Multiplier (GEM) as a central tracker in International Linear Collider (ILC). We have been studying the many R&D items to build the real detector as a member of LCTPC collaboration. This paper describes the our efforts for realization of the ILD-TPC, the result of test beam using large prototype TPC, local field distortion, positive ion effects and gate devices, and cooling electronics which are key items to build ILD-TPC.
△ Less
Submitted 30 March, 2014;
originally announced March 2014.
-
Summary of the Linear Collider Testbeam Workshop 2009 - LCTW09
Authors:
V. Boudry,
G. Fisk,
R. E. Frey,
F. Gaede,
C. Hast,
J. Hauptman,
K. Kawagoe,
L. Linssen,
R. Lipton,
W. Lohmann,
T. Matsuda,
T. Nelson,
R. Poeschl,
E. Ramberg,
F. Sefkow,
M. Vos,
M. Wing,
J. Yu
Abstract:
This note summarises the workshop LCTW09 held between the 3.11.2009 and 5.11.2009 at LAL Orsay. The workshop was dedicated to discuss the beam tests in the years 2010 up to 2013 for detectors to be operated at a future linear electron positron collider. The document underlines the rich R&D program on these detectors in the coming years. Large synergies were identified in the DAQ and software syste…
▽ More
This note summarises the workshop LCTW09 held between the 3.11.2009 and 5.11.2009 at LAL Orsay. The workshop was dedicated to discuss the beam tests in the years 2010 up to 2013 for detectors to be operated at a future linear electron positron collider. The document underlines the rich R&D program on these detectors in the coming years. Large synergies were identified in the DAQ and software systems. Considerable consolidation of resources are expected from the establishment of semi-permanent beam lines for linear collider detector R&D at major centres like CERN and FNAL. Reproducing a beam structure as foreseen for the International Linear Collider (ILC) would clearly enhance the value of the obtained beam test results. Although not ultimately needed for every research program, all groups would exploit such a feature if it is available.
△ Less
Submitted 7 October, 2010;
originally announced October 2010.
-
Cosmic ray tests of a GEM-based TPC prototype operated in Ar-CF4-isobutane gas mixtures
Authors:
M. Kobayashi,
R. Yonamine,
T. Tomioka,
A. Aoza,
H. Bito,
K. Fujii,
T. Higashi,
K. Hiramatsu,
K. Ikematsu,
A. Ishikawa,
Y. Kato,
H. Kuroiwa,
T. Matsuda,
O. Nitoh,
H. Ohta,
K. Sakai,
R. D. Settles,
A. Sugiyama,
H. Tsuji,
T. Watanabe,
H. Yamaoka,
T. Yazu
Abstract:
Argon with an admixture of CF4 is expected to be a good candidate for the gas mixture to be used for a time projection chamber (TPC) in the future linear collider experiment because of its small transverse diffusion of drift electrons especially under a strong magnetic field. In order to confirm the superiority of this gas mixture over conventional TPC gases we carried out cosmic ray tests using a…
▽ More
Argon with an admixture of CF4 is expected to be a good candidate for the gas mixture to be used for a time projection chamber (TPC) in the future linear collider experiment because of its small transverse diffusion of drift electrons especially under a strong magnetic field. In order to confirm the superiority of this gas mixture over conventional TPC gases we carried out cosmic ray tests using a GEM-based TPC operated mostly in Ar-CF4-isobutane mixtures under 0 - 1 T axial magnetic fields. The measured gas properties such as gas gain and transverse diffusion constant as well as the observed spatial resolution are presented.
△ Less
Submitted 21 March, 2023; v1 submitted 30 August, 2010;
originally announced August 2010.
-
A Lightweight Field Cage for a Large TPC Prototype for the ILC
Authors:
Ties Behnke,
Klaus Dehmelt,
Ralf Diener,
Lea Hallermann,
Takeshi Matsuda,
Volker Prahl,
Peter Schade
Abstract:
We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21 % of a radiation length and a drift field homogeneity of Delta(E)/(E) l…
▽ More
We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21 % of a radiation length and a drift field homogeneity of Delta(E)/(E) less or equal 10^-4. Since November 2008 the prototype has been part of a comprehensive test beam setup at DESY and used as a test chamber for the development of Micro Pattern Gas Detector based readout devices.
△ Less
Submitted 16 June, 2010;
originally announced June 2010.
-
Cosmic Ray Tests of the Prototype TPC for the ILC Experiment
Authors:
K. Ackermann,
S. Arai,
D. C. Arogancia,
A. M. Bacala,
M. Ball,
T. Behnke,
H. Bito,
V. Eckardt,
K. Fujii,
T. Fusayasu,
N. Ghodbane,
H. C. Gooc Jr.,
T. Kijima,
M. Hamann,
M. Habu,
R. -D. Heuer,
K. Hiramatsu,
K. Ikematsu,
A. Kaukher,
H. Kuroiwa,
M. E. Janssen,
Y. Kato,
M. Kobayashi,
T. Kuhl,
T. Lux
, et al. (25 additional authors not shown)
Abstract:
A time projection chamber (TPC) is a strong candidate for the central tracker of the international linear collider (ILC) experiment and we have been conducting a series of cosmic ray experiments under a magnetic field up to 4 T, using a small prototype TPC with a replaceable readout device: multi-wire proportional chamber (MWPC) or gas electron multiplier (GEM). We first confirmed that the MWPC…
▽ More
A time projection chamber (TPC) is a strong candidate for the central tracker of the international linear collider (ILC) experiment and we have been conducting a series of cosmic ray experiments under a magnetic field up to 4 T, using a small prototype TPC with a replaceable readout device: multi-wire proportional chamber (MWPC) or gas electron multiplier (GEM). We first confirmed that the MWPC readout could not be a fall-back option of the ILC-TPC under a strong axial magnetic field of 4 T since its spatial resolution suffered severely from the so called E x B effect in the vicinity of the wire planes. The GEM readout, on the other hand, was found to be virtually free from the E x B effect as had been expected and gave the resolution determined by the transverse diffusion of the drift electrons (diffusion limited). Furthermore, GEMs allow a wider choice of gas mixtures than MWPCs. Among the gases we tried so far a mixture of Ar-CF4-isobutane, in which MWPCs could be prone to discharges, seems promising as the operating gas of the ILC-TPC because of its small diffusion constant especially under a strong magnetic field. We report the measured drift properties of this mixture including the diffusion constant as a function of the electric field and compare them with the predictions of Magboltz. Also presented is the spatial resolution of a GEM-based ILC-TPC estimated from the measurement with the prototype.
△ Less
Submitted 18 May, 2009;
originally announced May 2009.
-
A Large TPC Prototype with MPGD Readout: Status and Plans
Authors:
Ties Behnke,
Klaus Dehmelt,
Takeshi Matsuda,
Peter Schade
Abstract:
The use of a TPC in future collider experiments needs significant research and development. Within the EUDET program an infrastructure has been designed and built to allow the efficient testing of TPC prototypes under realistic conditions. The infrastructure consists of a test beam facility, located at DESY Hamburg, and a multi-purpose TPC field cage.
The use of a TPC in future collider experiments needs significant research and development. Within the EUDET program an infrastructure has been designed and built to allow the efficient testing of TPC prototypes under realistic conditions. The infrastructure consists of a test beam facility, located at DESY Hamburg, and a multi-purpose TPC field cage.
△ Less
Submitted 16 March, 2009;
originally announced March 2009.
-
A GEM TPC End-Panel Pre-Prototype
Authors:
A. Ishikawa,
A. Aoza,
T. Higashi,
A. Sugiyama,
H. Tsuji,
Y. Kato,
K. Hiramatsu,
T. Yazu,
T. Watanabe,
O. Nitoh,
H. Ohta,
K. Sakai,
H. Bito,
K. Fujii,
M. Kobayashi,
H. Kuroiwa,
T. Matsuda,
R. Yonamine,
Y. Gao,
Y. Li,
J. Li,
L. Cao,
Z. Yang,
A. Bacala,
C. J. Gooc
, et al. (2 additional authors not shown)
Abstract:
A GEM TPC end panel pre-prototype was constructed for a large LC-TPC prototype to test its basic design philosophy and some of its engineering details. Its interim test results are presented.
A GEM TPC end panel pre-prototype was constructed for a large LC-TPC prototype to test its basic design philosophy and some of its engineering details. Its interim test results are presented.
△ Less
Submitted 1 October, 2007;
originally announced October 2007.
-
Application of numerical methods to modeling the stellar wind and interstellar medium interaction
Authors:
Nikolai Pogorelov,
Takuya Matsuda
Abstract:
We present a review of the application of numerical methods to solve the problem of the stellar/solar wind with the local interstellar medium. Most of approaches described are developed by the authors. They include both purely gas dynamic and magnetohydrodynamic methods. Some attention is given to the influence of the neutral component of the interstellar medium on the flow structure. Far-field…
▽ More
We present a review of the application of numerical methods to solve the problem of the stellar/solar wind with the local interstellar medium. Most of approaches described are developed by the authors. They include both purely gas dynamic and magnetohydrodynamic methods. Some attention is given to the influence of the neutral component of the interstellar medium on the flow structure. Far-field boundary conditions are formulated which are usually required in astrophyscal application owing to the extremely large length scale of these problems. Results are presented of the stationary and nonstationary, axisymmetric and geniunly three-dimensional calculations. Newly developed high-resolution numerical methods are discussed which can be applied to a large variety of astrophysical problems. The bibliography includes 113 references. The review will be published in ``CFD Review 97'' by John Wiley.
△ Less
Submitted 20 July, 1998;
originally announced July 1998.