Showing 1–37 of 37 results for author: Masuda, T

Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility

Authors: Shuhei Obara, Kota Ueshima, Takao Asaka, Yuji Hosaka, Koichi Kan, Nobuyuki Nishimori, Toshitaka Aoki, Hiroyuki Asano, Koichi Haga, Yuto Iba, Akira Ihara, Katsumasa Ito, Taiki Iwashita, Masaya Kadowaki, Rento Kanahama, Hajime Kobayashi, Hideki Kobayashi, Hideo Nishihara, Masaaki Nishikawa, Haruhiko Oikawa, Ryota Saida, Keisuke Sakuraba, Kento Sugimoto, Masahiro Suzuki, Kouki Takahashi , et al. (57 additional authors not shown)

Abstract: NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizont… ▽ More NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizontal emittance of 1.14 nm rad, which is small enough for soft X-rays users. The NanoTerasu accelerator incorporates several innovative technologies, including a full-energy injector C-band linear accelerator with a length of 110 m, an in-vacuum off-axis injection system, a four-bend achromat with B-Q combined bending magnets, and a TM020 mode accelerating cavity with built-in higher-order-mode dampers in the storage ring. This paper presents the accelerator machine commissioning over a half-year period and our model-consistent ring optics correction. The first user operation with a stored beam current of 160 mA is also reported. We summarize the storage ring parameters obtained from the commissioning. This is helpful for estimating the effective optical properties of synchrotron radiation at NanoTerasu. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 30 pages, 24 figures, submitted to the journal

Controlling $^{229}$Th isomeric state population in a VUV transparent crystal

Authors: Takahiro Hiraki, Koichi Okai, Michael Bartokos, Kjeld Beeks, Hiroyuki Fujimoto, Yuta Fukunaga, Hiromitsu Haba, Yoshitaka Kasamatsu, Shinji Kitao, Adrian Leitner, Takahiko Masuda, Guan Ming, Nobumoto Nagasawa, Ryoichiro Ogake, Martin Pimon, Martin Pressler, Noboru Sasao, Fabian Schaden, Thorsten Schumm, Makoto Seto, Yudai Shigekawa, Koutaro Shimizu, Tomas Sikorsky, Kenji Tamasaku, Sayuri Takatori , et al. (5 additional authors not shown)

Abstract: The radioisotope Th-229 is renowned for its extraordinarily low-energy, long-lived nuclear first-excited state. This isomeric state can be excited by VUV lasers and the transition from the ground state has been proposed as a reference transition for ultra-precise nuclear clocks. Such nuclear clocks will find multiple applications, ranging from fundamental physics studies to practical implementatio… ▽ More The radioisotope Th-229 is renowned for its extraordinarily low-energy, long-lived nuclear first-excited state. This isomeric state can be excited by VUV lasers and the transition from the ground state has been proposed as a reference transition for ultra-precise nuclear clocks. Such nuclear clocks will find multiple applications, ranging from fundamental physics studies to practical implementations. Recent investigations extracted valuable constraints on the nuclear transition energy and lifetime, populating the isomer in stochastic nuclear decay of U-233 or Ac-229. However, to assess the feasibility and performance of the (solid-state) nuclear clock concept, time-controlled excitation and depopulation of the $^{229}$Th isomer together with time-resolved monitoring of the radiative decay are imperative. Here we report the population of the $^{229}$Th isomeric state through resonant X-ray pum** and detection of the radiative decay in a VUV transparent $^{229}$Th-doped CaF$_2$ crystal. The decay half-life is measured to $447\pm 25$ s, with a transition wavelength of $148.18 \pm 0.42$ nm and a radiative decay fraction consistent with unity. Furthermore, we report a new ``X-ray quenching'' effect which allows to de-populate the isomer on demand and effectively reduce the half-life by at least a factor 50. Such controlled quenching can be used to significantly speed up the interrogation cycle in future nuclear clock schemes. Our results show that full control over the $^{229}$Th nuclear isomer population can be achieved in a crystal environment. In particular, non-radiative decay processes that might lead to a broadening of the isomer transition linewidth are negligible, paving the way for the development of a compact and robust solid-state nuclear clock. Further studies are needed to reveal the underlying physical mechanism of the X-ray quenching effect. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 14 pages with 8 figures and 2 tables

A new inelastic neutron spectrometer HODACA

Authors: Hodaka Kikuchi, Shinichiro Asai, Taku J. Sato, Taro Nakajima, Leland Harriger, Igor Zaliznyak, Takatsugu Masuda

Abstract: A new multiplex-type inelastic neutron scattering spectrometer, HOrizontally Defocusing Analyzer Concurrent data Acquisition spectrometer (HODACA), was recently developed and built at the C1-1 cold neutron beam port in JRR-3. The spectrometer is suitable for dynamics measurements in the energy range of $-1$ meV $\lesssim \hbar ω\lesssim$ 7 meV, catering to a broad array of research fields in physi… ▽ More A new multiplex-type inelastic neutron scattering spectrometer, HOrizontally Defocusing Analyzer Concurrent data Acquisition spectrometer (HODACA), was recently developed and built at the C1-1 cold neutron beam port in JRR-3. The spectrometer is suitable for dynamics measurements in the energy range of $-1$ meV $\lesssim \hbar ω\lesssim$ 7 meV, catering to a broad array of research fields in physics and material science. HODACA combines 24 detectors and 132 pieces of analyzer crystals and has an estimated measurement efficiency that is 70 times greater than the existing conventional triple-axis spectrometer at the C1-1 beam port. The concept, design, specification, and results of commissioning experiments are described. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 11 pages, 16 figures

Journal ref: J. Phys. Soc. Jpn. 93, 091004 (2024)

Fiber-taper collected emission from NV centers in high-$Q/V$ diamond microdisks

Authors: Tamiko Masuda, J. P. E. Hadden, David P. Lake, Matthew Mitchell, Sigurd Flågan, Paul E. Barclay

Abstract: Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ($V$) of each cavity mode, the cavity quality factor ($Q$), and the coupling between the microdisk and the fiber. Here we observe photoluminescence from an ensemble of nitrogen-vacancy ce… ▽ More Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ($V$) of each cavity mode, the cavity quality factor ($Q$), and the coupling between the microdisk and the fiber. Here we observe photoluminescence from an ensemble of nitrogen-vacancy centers into high $Q/V$ microdisk modes, which when combined with coherent spectroscopy of the microdisk modes, allows us to elucidate the relative contributions of these factors. The broad emission spectrum acts as an internal light source facilitating mode identification over several cavity free spectral ranges. Analysis of the fiber-taper collected microdisk emission reveals spectral filtering both by the cavity and the fiber-taper, the latter of which we find preferentially couples to higher-order microdisk modes. Coherent mode spectroscopy is used to measure $Q\sim 1\times10^{5}$ -- the highest reported values for diamond microcavities operating at visible wavelengths. With realistic optimization of the microdisk dimensions, we predict that Purcell factors of $\sim 50$ are within reach. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Comments: 15 pages, 4 figures

High-sensitivity low-noise photodetector using large-area silicon photomultiplier

Authors: Takahiko Masuda, Ayami Hiramoto, Daniel G. Ang, Cole Meisenhelder, Cristian D. Panda, Noboru Sasao, Satoshi Uetake, Xing Wu, David P. DeMille, John M. Doyle, Gerald Gabrielse, Koji Yoshimura

Abstract: The application of silicon photomultiplier (SiPM) technology for weak-light detection at a single photon level has expanded thanks to its better photon detection efficiency in comparison to a conventional photomultiplier tube (PMT). SiPMs with large detection area have recently become commercially available, enabling applications where the photon flux is low both temporarily and spatially. On the… ▽ More The application of silicon photomultiplier (SiPM) technology for weak-light detection at a single photon level has expanded thanks to its better photon detection efficiency in comparison to a conventional photomultiplier tube (PMT). SiPMs with large detection area have recently become commercially available, enabling applications where the photon flux is low both temporarily and spatially. On the other hand, several drawbacks exist in the usage of SiPMs such as a higher dark count rate, many readout channels, slow response time, and optical crosstalk; therefore, users need to carefully consider the trade-offs. This work presents a SiPM-embedded compact large-area photon detection module. Various techniques are adopted to overcome the disadvantages of SiPMs so that it can be generally utilized as an upgrade from a PMT. A simple cooling component and recently developed optical crosstalk suppression method are adopted to reduce the noise which is more serious for larger-area SiPMs. A dedicated readout circuit increases the response frequency and reduces the number of readout channels. We favorably compare this design with a conventional PMT and obtain both higher photon detection efficiency and larger-area acceptance. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Journal ref: Opt. Express 31(2), 1943 (2023)

SiPM module for the ACME III electron EDM search

Authors: A. Hiramoto, T. Masuda, D. G. Ang, C. Meisenhelder, C. Panda, N. Sasao, S. Uetake, X. Wu, D. Demille, J. M. Doyle, G. Gabrielse, K. Yoshimura

Abstract: This report shows the design and the performance of a large area Silicon Photomultiplier (SiPM) module developed detection of fluorescent light emitted from a 10 cm scale volume. The module was optimized for the planned ACME III electron electric dipole moment (eEDM) search, which will be a powerful probe for the existence of physics beyond the Standard Model of particle physics. The ACME experime… ▽ More This report shows the design and the performance of a large area Silicon Photomultiplier (SiPM) module developed detection of fluorescent light emitted from a 10 cm scale volume. The module was optimized for the planned ACME III electron electric dipole moment (eEDM) search, which will be a powerful probe for the existence of physics beyond the Standard Model of particle physics. The ACME experiment searched for the eEDM with the world's highest sensitivity using cold ThO polar molecules (ACME II). In ACME III, SiPMs will be used for detection of fluorescent photons (the fundamental signal of the experiment) instead of PMTs, which were used in the previous measurement. We have developed an optimized SiPM module, based on a 16-channel SiPM array. Key operational parameters are characterized, including gain and noise. The SiPM dark count rate, background light sensitivity, and optical crosstalk are found to all be well suppressed and more than sufficient for the ACME III application. △ Less

Submitted 11 October, 2022; originally announced October 2022.

Comments: 10 pages, 6 figures, proceedings for NDIP20

Electrical conductivity characterized at varying strains in spiral cut high-pressure torsion discs

Authors: Evander Ramos, Takahiro Masuda, Zenji Horita, Suveen Mathaudhu

Abstract: High-pressure torsion (HPT) imparts inhomogeneous strain to process discs with low strain in the center and higher strain at the outer edge. Microscopy and microhardness indentation have been used to characterize and correlate this inhomogeneity with strain, but similar exploration with other properties has been uncommon. In this work, the electrical conductivity of pure copper discs processed by… ▽ More High-pressure torsion (HPT) imparts inhomogeneous strain to process discs with low strain in the center and higher strain at the outer edge. Microscopy and microhardness indentation have been used to characterize and correlate this inhomogeneity with strain, but similar exploration with other properties has been uncommon. In this work, the electrical conductivity of pure copper discs processed by HPT was characterized with respect to equivalent strain by cutting them into spirals with an incremental, monotonic increase in strain. Electrical conductivity varied with straining in agreement with the literature and expectations based on grain boundary evolution. The spiral conductivity testing method outlined in this work can improve characterization of HPT materials in future studies. △ Less

Submitted 13 November, 2021; originally announced November 2021.

Strain effects on the wear rate of severely deformed copper

Authors: Evander Ramos, Takahiro Masuda, Sina Shahrezaei, Zenji Horita, Suveen Mathaudhu

Abstract: A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to process discs with low strain in the center and high strain at the outer edge. In the literature, this inhomogeneity is typically ignored when characterizing wear pr… ▽ More A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to process discs with low strain in the center and high strain at the outer edge. In the literature, this inhomogeneity is typically ignored when characterizing wear properties after HPT. In this work, the wear rate of pure copper discs processed by HPT was characterized by conducting dry sliding reciprocating wear tests at a few judicious locations on the discs. From only two discs, the wear resistance across many ranges of strains was captured. These measurements agreed with the literature for other SPD processes at varying strains. Wear rates dropped and plateaued at about 25% that of the unprocessed state when processing past equivalent strains of around 15, after which microstructural and microhardness saturation has also been observed. Some indication of a relationship between the direction of the imposed SPD shearing and the sliding wear direction was also observed. The incremental microstructure, microhardness, and wear resistance evolution past equivalent strains of ~15 indicate that for high purity copper these properties receive no clear benefit from higher SPD strains. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Estimation of radiative half-life of $^{229m}$Th by half-life measurement of other nuclear excited states in $^{229}$Th

Authors: Y. Shigekawa, A. Yamaguchi, K. Suzuki, H. Haba, T. Hiraki, H. Kikunaga, T. Masuda, S. Nishimura, N. Sasao, A. Yoshimi, K. Yoshimura

Abstract: We perform coincidence measurements between $α$ particles and $γ$ rays from a $^{233}$U source to determine the half-lives of the excited state in a $^{229}$Th nucleus. We first prove that the half-lives of 42.43- and 164.53-keV states are consistent with literature values, whereas that of the 97.14-keV state (93(7) ps) deviates from a previously measured value (147(12) ps). The half-lives of 71.8… ▽ More We perform coincidence measurements between $α$ particles and $γ$ rays from a $^{233}$U source to determine the half-lives of the excited state in a $^{229}$Th nucleus. We first prove that the half-lives of 42.43- and 164.53-keV states are consistent with literature values, whereas that of the 97.14-keV state (93(7) ps) deviates from a previously measured value (147(12) ps). The half-lives of 71.83- and 163.25-keV states are determined for the first time. Based on the obtained half-lives and the Alaga rule, we estimate the radiative half-life of the low-energy isomeric state ($^{229m}$Th) to be $5.0(11)\times10^{3}$ s, which is one of the key parameters for the frequency standard based on $^{229}$Th. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Comments: 33 pages, 9 figures. 3 tables

Journal ref: Phys. Rev. C 104, 024306 (2021)

Suppression of the optical crosstalk in a multi-channel silicon photomultiplier array

Authors: Takahiko Masuda, Daniel G. Ang, Nicholas R. Hutzler, Cole Meisenhelder, Noboru Sasao, Satoshi Uetake, Xing Wu, David DeMille, Gerald Gabrielse, John M. Doyle, Koji Yoshimura

Abstract: We propose and study a method of optical crosstalk suppression for silicon photomultipliers (SiPMs) using optical filters. We demonstrate that attaching absorptive visible bandpass filters to the SiPM can substantially reduce the optical crosstalk. Measurements suggest that the absorption of near infrared light is important to achieve this suppression. The proposed technique can be easily applied… ▽ More We propose and study a method of optical crosstalk suppression for silicon photomultipliers (SiPMs) using optical filters. We demonstrate that attaching absorptive visible bandpass filters to the SiPM can substantially reduce the optical crosstalk. Measurements suggest that the absorption of near infrared light is important to achieve this suppression. The proposed technique can be easily applied to suppress the optical crosstalk in SiPMs in cases where filtering near infrared light is compatible with the application. △ Less

Submitted 4 May, 2021; originally announced May 2021.

Generating 3D Molecular Structures Conditional on a Receptor Binding Site with Deep Generative Models

Authors: Tomohide Masuda, Matthew Ragoza, David Ryan Koes

Abstract: Deep generative models have been applied with increasing success to the generation of two dimensional molecules as SMILES strings and molecular graphs. In this work we describe for the first time a deep generative model that can generate 3D molecular structures conditioned on a three-dimensional (3D) binding pocket. Using convolutional neural networks, we encode atomic density grids into separate… ▽ More Deep generative models have been applied with increasing success to the generation of two dimensional molecules as SMILES strings and molecular graphs. In this work we describe for the first time a deep generative model that can generate 3D molecular structures conditioned on a three-dimensional (3D) binding pocket. Using convolutional neural networks, we encode atomic density grids into separate receptor and ligand latent spaces. The ligand latent space is variational to support sampling of new molecules. A decoder network generates atomic densities of novel ligands conditioned on the receptor. Discrete atoms are then fit to these continuous densities to create molecular structures. We show that valid and unique molecules can be readily sampled from the variational latent space defined by a reference `seed' structure and generated structures have reasonable interactions with the binding site. As structures are sampled farther in latent space from the seed structure, the novelty of the generated structures increases, but the predicted binding affinity decreases. Overall, we demonstrate the feasibility of conditional 3D molecular structure generation and provide a starting point for methods that also explicitly optimize for desired molecular properties, such as high binding affinity. △ Less

Submitted 23 November, 2020; v1 submitted 16 October, 2020; originally announced October 2020.

Absolute X-ray energy measurement using a high-accuracy angle encoder

Authors: Takahiko Masuda, Tsukasa Watanabe, Kjeld Beeks, Hiroyuki Fujimoto, Takahiro Hiraki, Hiroyuki Kaino, Shinji Kitao, Yuki Miyamoto, Koichi Okai, Noboru Sasao, Makoto Seto, Thorsten Schumm, Yudai Shigekawa, Kenji Tamasaku, Satoshi Uetake, Atsushi Yamaguchi, Yoshitaka Yoda, Akihiro Yoshimi, Koji Yoshimura

Abstract: This paper presents an absolute X-ray photon energy measurement method that uses a Bond diffractometer. The proposed system enables the prompt and rapid in-situ measurement of photon energies in a wide energy range. The diffractometer uses a reference silicon single crystal plate and a highly accurate angle encoder called SelfA. We evaluate the performance of the system by repeatedly measuring the… ▽ More This paper presents an absolute X-ray photon energy measurement method that uses a Bond diffractometer. The proposed system enables the prompt and rapid in-situ measurement of photon energies in a wide energy range. The diffractometer uses a reference silicon single crystal plate and a highly accurate angle encoder called SelfA. We evaluate the performance of the system by repeatedly measuring the energy of the first excited state of the potassium-40 nuclide. The excitation energy is determined as 29829.39(6) eV. It is one order of magnitude more precise than the previous measurement. The estimated uncertainty of the photon energy measurement was 0.7 ppm as a standard deviation and the maximum observed deviation was 2 ppm. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Establishing the carrier scattering phase diagram for ZrNiSn-based half-Heusler thermoelectric materials

Authors: Qingyong Ren, Chenguang Fu, Qinyi Qiu, Shengnan Dai, Zheyuan Liu, Takatsugu Masuda, Shinichiro Asai, Masato Hagihala, Sanghyun Lee, Shuki Torri, Takashi Kamiyama, Lunhua He, Xin Tong, Claudia Felser, David J. Singh, Tiejun Zhu, Jiong Yang, Jie Ma

Abstract: Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in… ▽ More Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in half-Heusler thermoelectric materials. With ZrNiSn-based half-Heusler materials as an example, we use high-quality single and polycrystalline crystals, various probes, including electrical transport measurements, inelastic neutron scattering measurement, and first-principles calculations, to investigate the underlying electron-phonon interaction. We find that chemical do** brings strong screening effects to ionized impurities, grain boundary, and polar optical phonon scattering, but has negligible influence on lattice thermal conductivity. Furthermore, it is possible to establish a carrier scattering phase diagram, which can be used to select reasonable strategies for optimization of the thermoelectric performance. △ Less

Submitted 22 June, 2020; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: 21 pages, 5 figures

Journal ref: Nature Communications 11, 3142 (2020)

Method for the calculation of the Hamaker constants of organic materials by the Lifshitz macroscopic approach with DFT

Authors: Hideyuki Takagishi, Takashi Masuda, Tatsuya Shimoda, Ryo Maezono, Kenta Hongo

Abstract: The Hamaker constants, which are coefficients providing quantitative information on intermolecular forces, were calculated for a number of different materials according to the Lifshitz theory via simple DFT calculations without any experimental measurements being performed. The physical properties (polarizability, dipole moment, molecular volume, and vibrational frequency) of organic molecules wer… ▽ More The Hamaker constants, which are coefficients providing quantitative information on intermolecular forces, were calculated for a number of different materials according to the Lifshitz theory via simple DFT calculations without any experimental measurements being performed. The physical properties (polarizability, dipole moment, molecular volume, and vibrational frequency) of organic molecules were calculated using the B3LYP density functional and the aug-cc-pVDZ basis set. Values for the Hamaker constants were obtained using the approximation of the Lorentz-Lorenz equation and Onsager's equation with these properties. It was found that, in the case of `non-associative' materials, like hydrocarbons, ethers, ketones, aldehydes, carboxylic acids, esters, nitriles, and hydrosilanes, and halides, the calculated Hamaker constants were similar in value to their experimentally determined counterparts. Moreover, with this calculation method, it is easy to create the molecular model and the CPU time can be shortened. △ Less

Submitted 19 June, 2019; originally announced June 2019.

Comments: 8 pages, 7 figures

Journal ref: J. Phys. Chem. A 123, 8726-8733 (2019)

Development of a measurement system enabling the reconstruction of gamma-ray time spectra by simultaneous recording of energy and time information

Authors: Hiroyuki Tajima, Shinji Kitao, Ryo Masuda, Yasuhiro Kobayashi, Takahiko Masuda, Koji Yoshimura, Makoto Seto

Abstract: We developed a measurement system that enables the reconstruction of γ-ray time spectra in cascade decay schemes. As this system records all the time and energy information of γ-rays, reconstruction is possible after the measurement. Therefore, the energy regions for the γ-ray identification can be optimized in complicated cascade decay schemes. Moreover, in this system we can record data with tim… ▽ More We developed a measurement system that enables the reconstruction of γ-ray time spectra in cascade decay schemes. As this system records all the time and energy information of γ-rays, reconstruction is possible after the measurement. Therefore, the energy regions for the γ-ray identification can be optimized in complicated cascade decay schemes. Moreover, in this system we can record data with time-dependent parameters of external perturbations, such as applied magnetic fields, and consequently we can investigate the correlations and responses of γ-rays to the perturbation. This property fulfills the demands required for quantum information research with γ-rays. △ Less

Submitted 27 May, 2019; originally announced May 2019.

Comments: 7 pages with 3 figures

X-ray pum** of the Th-229 nuclear clock isomer

Authors: Takahiko Masuda, Akihiro Yoshimi, Akira Fujieda, Hiroyuki Fujimoto, Hiromitsu Haba, Hideaki Hara, Takahiro Hiraki, Hiroyuki Kaino, Yoshitaka Kasamatsu, Shinji Kitao, Kenji Konashi, Yuki Miyamoto, Koichi Okai, Sho Okubo, Noboru Sasao, Makoto Seto, Thorsten Schumm, Yudai Shigekawa, Kenta Suzuki, Simon Stellmer, Kenji Tamasaku, Satoshi Uetake, Makoto Watanabe, Tsukasa Watanabe, Yuki Yasuda , et al. (5 additional authors not shown)

Abstract: Thorium-229 is a unique case in nuclear physics: it presents a metastable first excited state Th-229m, just a few electronvolts above the nuclear ground state. This so-called isomer is accessible by VUV lasers, which allows transferring the amazing precision of atomic laser spectroscopy to nuclear physics. Being able to manipulate the Th-229 nuclear states at will opens up a multitude of prospects… ▽ More Thorium-229 is a unique case in nuclear physics: it presents a metastable first excited state Th-229m, just a few electronvolts above the nuclear ground state. This so-called isomer is accessible by VUV lasers, which allows transferring the amazing precision of atomic laser spectroscopy to nuclear physics. Being able to manipulate the Th-229 nuclear states at will opens up a multitude of prospects, from studies of the fundamental interactions in physics to applications as a compact and robust nuclear clock. However, direct optical excitation of the isomer or its radiative decay back to the ground state has not yet been observed, and a series of key nuclear structure parameters such as the exact energies and half-lives of the low-lying nuclear levels of Th-229 are yet unknown. Here we present the first active optical pum** into Th-229m. Our scheme employs narrow-band 29 keV synchrotron radiation to resonantly excite the second excited state, which then predominantly decays into the isomer. We determine the resonance energy with 0.07 eV accuracy, measure a half-life of 82.2 ps, an excitation linewidth of 1.70 neV, and extract the branching ratio of the second excited state into the ground and isomeric state respectively. These measurements allow us to re-evaluate gamma spectroscopy data that have been collected over 40~years. △ Less

Submitted 13 February, 2019; originally announced February 2019.

Comments: 14 pages with 9 figures and 3 tables

Geometry-dependent spectra and coherent-transient measurement of nearly degenerate four-wave mixing using two-photon resonance

Authors: Hideaki Hara, Yuki Miyamoto, Takahiro Hiraki, Kei Imamura, Takahiko Masuda, Noboru Sasao, Satoshi Uetake, Akihiro Yoshimi, Koji Yoshimura, Motohiko Yoshimura

Abstract: We study nearly degenerate four-wave mixing using a two-photon-allowed vibrational transition of parahydrogen. A signal photon is generated by a trigger photon and coherence among parahydrogen, which is prepared by two counterpropagating pump pulses. The dependence of the signal pulse energy on the trigger frequency are investigated. The measured spectra vary depending on the geometry. They shift… ▽ More We study nearly degenerate four-wave mixing using a two-photon-allowed vibrational transition of parahydrogen. A signal photon is generated by a trigger photon and coherence among parahydrogen, which is prepared by two counterpropagating pump pulses. The dependence of the signal pulse energy on the trigger frequency are investigated. The measured spectra vary depending on the geometry. They shift depending on the direction of the signal pulse and on the small angle formed by the counterpropagating pump pulses. Furthermore, the dependence of signal pulse energy on the incident time of the trigger pulse is investigated. The measured signal pulse energy is high if the trigger pulse is slightly delayed with respect to the pump pulses. We demonstrate that these geometry-dependent spectra and coherent-transient response can be explained by using simple models. △ Less

Submitted 31 October, 2018; originally announced October 2018.

Comments: 10 pages, 8 figures

Energy response of X-rays under high flux conditions using a thin APD for the energy range of 6-33 keV

Authors: T. Masuda, T. Hiraki, H. Kaino, S. Kishimoto, Y. Miyamoto, K. Okai, S. Okubo, R. Ozaki, N. Sasao, K. Suzuki, S. Uetake, A. Yoshimi, K. Yoshimura

Abstract: This paper reports on the demonstration of a high-rate energy measurement technique using a thin depletion layer silicon avalanche photodiode (Si-APD). A dedicated amplitude-to-time converter is developed to realize simultaneous energy and timing measurement in a high rate condition. The energy response of the system is systematically studied by using monochromatic X-ray beam with an incident ener… ▽ More This paper reports on the demonstration of a high-rate energy measurement technique using a thin depletion layer silicon avalanche photodiode (Si-APD). A dedicated amplitude-to-time converter is developed to realize simultaneous energy and timing measurement in a high rate condition. The energy response of the system is systematically studied by using monochromatic X-ray beam with an incident energy ranging from 6 to 33 keV. The obtained energy spectra contain clear peaks and tail distributions. The peak fraction monotonously decreases as the incident photon energy increases. This phenomenon can be explained by considering the distribution of the energy deposit in silicon, which is investigated by using a Monte Carlo simulation. △ Less

Submitted 18 October, 2018; v1 submitted 15 July, 2018; originally announced July 2018.

Journal ref: Nuclear Inst. and Methods in Physics Research, A 913 (2019) 72-77

Coherent two-photon emission from hydrogen molecules excited by counter-propagating laser pulses

Authors: Takahiro Hiraki, Hideaki Hara, Yuki Miyamoto, Kei Imamura, Takahiko Masuda, Noboru Sasao, Satoshi Uetake, Akihiro Yoshimi, Koji Yoshimura, Motohiko Yoshimura

Abstract: We observed two-photon emission signals from the first vibrationally excited state of parahydrogen gas excited coherently by counter-propagating laser pulses. A single narrow-linewidth laser source was used to excite the parahydrogen molecules and induce the two-photon emission process. We measured how the signal energy depended on the detuning, target gas pressure, and input pulse energies. These… ▽ More We observed two-photon emission signals from the first vibrationally excited state of parahydrogen gas excited coherently by counter-propagating laser pulses. A single narrow-linewidth laser source was used to excite the parahydrogen molecules and induce the two-photon emission process. We measured how the signal energy depended on the detuning, target gas pressure, and input pulse energies. These results are qualitatively consistent with those obtained by numerical simulations based on the Maxwell-Bloch equations with one spatial dimension and one temporal dimension. This study of two-photon emission with counter-propagating injection is an important step toward neutrino mass spectroscopy. △ Less

Submitted 30 January, 2019; v1 submitted 11 June, 2018; originally announced June 2018.

Comments: 20 pages, 6 figures

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 52 (2019) 045401

YUI and HANA: Control and Visualization Programs for HRC in J-PARC

Authors: Daichi Kawana, Minoru Soda, Masahiro Yoshida, Yoichi Ikeda, Toshio Asami, Ryosuke Sugiura, Hideki Yoshizawa, Takatsugu Masuda, Takafumi Hawai, Soshi Ibuka, Tetsuya Yokoo, Shinichi Itoh

Abstract: We developed control and visualization programs, YUI and HANA, for High- Resolution Chopper spectrometer (HRC) installed at BL12 in MLF, J-PARC. YUI is a comprehensive program to control DAQ-middleware, the accessories, and sample environment devices. HANA is a program for the data transformation and visualization of inelastic neutron scattering spectra. In this paper, we describe the basic system… ▽ More We developed control and visualization programs, YUI and HANA, for High- Resolution Chopper spectrometer (HRC) installed at BL12 in MLF, J-PARC. YUI is a comprehensive program to control DAQ-middleware, the accessories, and sample environment devices. HANA is a program for the data transformation and visualization of inelastic neutron scattering spectra. In this paper, we describe the basic system structures and unique functions of these programs from the viewpoint of users. △ Less

Submitted 2 October, 2017; v1 submitted 2 October, 2017; originally announced October 2017.

Comments: 9 pages, 4 figures

Nuclear resonant scattering experiment with fast time response: new scheme for observation of $^{229\rm m}$Th radiative decay

Authors: A. Yoshimi, H. Hara, T. Hiraki, Y. Kasamatsu, S. Kitao, Y. Kobayashi, K. Konashi, R. Masuda, T. Masuda, Y. Miyamoto, K. Okai, S. Okubo, R. Ozaki, N. Sasao, O. Sato, M. Seto, T. Schumm, Y. Shigekawa, S. Stellmer, K. Suzuki, S. Uetake, M. Watanabe, A. Yamaguchi, Y. Yasuda, Y. Yoda , et al. (2 additional authors not shown)

Abstract: Nuclear resonant excitation of the 29.19-keV level in $^{229}$Th with high-brilliance synchrotron- radiation and detection of its decay signal, are proposed with the aim of populating the extremely low-energy isomeric state of $^{229}$Th.The proposed experiment, known as nuclear resonant scattering (NRS), has the merit of being free from uncertainties about the isomer level energy. However, it req… ▽ More Nuclear resonant excitation of the 29.19-keV level in $^{229}$Th with high-brilliance synchrotron- radiation and detection of its decay signal, are proposed with the aim of populating the extremely low-energy isomeric state of $^{229}$Th.The proposed experiment, known as nuclear resonant scattering (NRS), has the merit of being free from uncertainties about the isomer level energy. However, it requires higher time resolution and shorter tail in the response function of the detector than that of conventional NRS experiments because of the short lifetime of the 29.19-keV state. We have fabricated an X-ray detector system which has a time resolution of 56 ps and a shorter tail function than the previously reported one. We have demonstrated an NRS experiment with the 26.27-keV nuclear level of $^{201}$Hg for feasibility assessment of the $^{229}$Th experiment. The NRS signal is clearly distinct from the prompt electronic scattering signal by the implemented detector system. The half-life of the 26.27-keV state of $^{201}$Hg is determined as 629 $\pm$ 18 ps which is better precision by a factor three than that reported to date. △ Less

Submitted 20 May, 2017; originally announced May 2017.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. C 97, 024607 (2018)

Fast X-ray detector system with simultaneous measurement of timing and energy for a single photon

Authors: T. Masuda, S. Okubo, H. Hara, T. Hiraki, S. Kitao, Y. Miyamoto, K. Okai, R. Ozaki, N. Sasao, M. Seto, S. Uetake, A. Yamaguchi, Y. Yoda, A. Yoshimi, K. Yoshimura

Abstract: We developed a fast X-ray detector system for nuclear resonant scattering (NRS) experiments. Our system employs silicon avalanche photo-diode (Si-APD) as a fast X-ray sensor. The system is able to acquire both timing and energy of a single X-ray photon simultaneously in a high rate condition, $10^6$ counts per second for one Si-APD. The performance of the system was investigated in SPring-8, a syn… ▽ More We developed a fast X-ray detector system for nuclear resonant scattering (NRS) experiments. Our system employs silicon avalanche photo-diode (Si-APD) as a fast X-ray sensor. The system is able to acquire both timing and energy of a single X-ray photon simultaneously in a high rate condition, $10^6$ counts per second for one Si-APD. The performance of the system was investigated in SPring-8, a synchrotron radiation facility in Japan. Good time resolution of \SI{120}{ps} (FWHM) was achieved with a slight tail distribution in the time spectrum by a level of $10^{-9}$ at 1 ns apart from the peak. Using this system, we successfully observed the NRS from the 26.27-keV level of mercury-201, which has a half-life of $630 \pm 50$ ps. We also demonstrated the reduction of background events caused by radioactive decays in a radioactive sample by discriminating photon energy. △ Less

Submitted 26 June, 2017; v1 submitted 15 February, 2017; originally announced February 2017.

Comments: 7 pages, 12 figures

Journal ref: Rev. Sci. Instrum. 88, 063105 (2017)

Vibrational two-photon emission from coherently excited solid parahydrogen

Authors: Yuki Miyamoto, Hideaki Hara, Takahiko Masuda, Noboru Sasao, Satoshi Uetake, Akihiro Yoshimi, Koji Yoshimura, Motohiko Yoshimura

Abstract: We report observation of two-photon emission from coherently excited vibrational state of solid parahydrogen, known as one of quantum solids. The coherent state between the ground and the excited states is prepared by stimulated Raman scattering using two visible laser pulses. The two-photon emission is triggered by another mid-infrared laser pulse. The observed two-photon emission persists even w… ▽ More We report observation of two-photon emission from coherently excited vibrational state of solid parahydrogen, known as one of quantum solids. The coherent state between the ground and the excited states is prepared by stimulated Raman scattering using two visible laser pulses. The two-photon emission is triggered by another mid-infrared laser pulse. The observed two-photon emission persists even when the trigger pulse is injected long after the excitation. The observed phenomenon is due to a long decoherence time of the vibrational states of solid parahydrogen, which is attributed to special nature as quantum solid. Dependence of the decoherence on target temperature and residual orthohydrogen concentration are studied along with its time evolution. It is found that the emission intensity increases even after the excitation pulses pass through the target completely. The coherence development is highly suppressed at high target temperature and high residual orthohydrogen concentration. Effects of target annealing and laser-induced damage on the target are also observed. △ Less

Submitted 16 December, 2016; originally announced December 2016.

A new method of creating high intensity neutron source

Authors: T. Masuda, A. Yoshimi, M. Yoshimura

Abstract: We propose a new scheme of producing intense neutron beam whose yields exceed those of existing facilities by many orders of magnitude. This scheme uses the recently proposed photon beam extracted from circulating quantum ions, which is directed to a deuteron target for photo-disintegration. The calculated neutron energy spectrum is nearly flat down to neV range, except a threshold rise and its ad… ▽ More We propose a new scheme of producing intense neutron beam whose yields exceed those of existing facilities by many orders of magnitude. This scheme uses the recently proposed photon beam extracted from circulating quantum ions, which is directed to a deuteron target for photo-disintegration. The calculated neutron energy spectrum is nearly flat down to neV range, except a threshold rise and its adjacent wide structure. Hence, there exists a possibility of directly using sub-eV neutrons without a moderator. We shall have brief comments on promising particle physics applications using this large yield of neutron. △ Less

Submitted 18 April, 2016; v1 submitted 11 April, 2016; originally announced April 2016.

Comments: A bug in numerical computation is corrected. 9 pages, 5 figures

Development of a low-mass and high-efficiency charged particle detector

Authors: D. Naito, Y. Maeda, N. Kawasaki, T. Masuda, H. Nanjo, T. Nomura, M. Sasaki, N. Sasao, S. Seki, K. Shiomi, Y. Tajima

Abstract: We developed a low-mass and high-efficiency charged particle detector for an experimental study of the rare decay $K_L \rightarrow π^0 ν\barν$. The detector is important to suppress the background with charged particles to the level below the signal branching ratio predicted by the Standard Model (O(10$^{-11}$)). The detector consists of two layers of 3-mm-thick plastic scintillators with waveleng… ▽ More We developed a low-mass and high-efficiency charged particle detector for an experimental study of the rare decay $K_L \rightarrow π^0 ν\barν$. The detector is important to suppress the background with charged particles to the level below the signal branching ratio predicted by the Standard Model (O(10$^{-11}$)). The detector consists of two layers of 3-mm-thick plastic scintillators with wavelength shifting fibers embedded and Multi Pixel Photon Counters for readout. We manufactured the counter and evaluated the performance such as light yield, timing resolution, and efficiency. With this design, we achieved the inefficiency per layer against penetrating charged particles to be less than $1.5 \times 10^{-5}$, which satisfies the requirement of the KOTO experiment determined from simulation studies. △ Less

Submitted 17 December, 2015; v1 submitted 13 December, 2015; originally announced December 2015.

Comments: 20 pages, 18 figures

Single-crystal diamond low-dissipation cavity optomechanics

Authors: Matthew Mitchell, Behzad Khanaliloo, David P. Lake, Tamiko Masuda, J. P. Hadden, Paul E. Barclay

Abstract: Single-crystal diamond cavity optomechanical devices are a promising example of a hybrid quantum system: by coupling mechanical resonances to both light and electron spins, they can enable new ways for photons to control solid state qubits. However, realizing cavity optomechanical devices from high quality diamond chips has been an outstanding challenge. Here we demonstrate single-crystal diamond… ▽ More Single-crystal diamond cavity optomechanical devices are a promising example of a hybrid quantum system: by coupling mechanical resonances to both light and electron spins, they can enable new ways for photons to control solid state qubits. However, realizing cavity optomechanical devices from high quality diamond chips has been an outstanding challenge. Here we demonstrate single-crystal diamond cavity optomechanical devices that can enable photon-phonon-spin coupling. Cavity optomechanical coupling to $2\,\text{GHz}$ frequency ($f_\text{m}$) mechanical resonances is observed. In room temperature ambient conditions, these resonances have a record combination of low dissipation (mechanical quality factor, $Q_\text{m} > 9000$) and high frequency, with $Q_\text{m}\cdot f_\text{m} \sim 1.9\times10^{13}$ sufficient for room temperature single phonon coherence. The system exhibits high optical quality factor ($Q_\text{o} > 10^4$) resonances at infrared and visible wavelengths, is nearly sideband resolved, and exhibits optomechanical cooperativity $C\sim 3$. The devices' potential for optomechanical control of diamond electron spins is demonstrated through radiation pressure excitation of mechanical self-oscillations whose 31 pm amplitude is predicted to provide 0.6 MHz coupling rates to diamond nitrogen vacancy center ground state transitions (6 Hz / phonon), and $\sim10^5$ stronger coupling rates to excited state transitions. △ Less

Submitted 12 October, 2016; v1 submitted 13 November, 2015; originally announced November 2015.

Comments: 12 pages, 5 figures

Journal ref: Optica 3, 963-970 (2016)

Injection seeded tunable mid-infrared pulses by difference frequency mixing

Authors: Yuki Miyamoto, Hideaki Hara, Takahiko Masuda, Takahiro Hiraki, Noboru Sasao, Satoshi Uetake

Abstract: We report on the generation of nanosecond mid-infrared pulses having frequency tunability, a narrow linewidth, and a high pulse energy. These pulses are obtained by frequency mixing between injection-seeded near-infrared pulses in potassium titanyl arsenate crystals. A continuous-wave external cavity laser diode or a Ti:sapphire ring laser is used as a tunable seeding source for the near-infrared… ▽ More We report on the generation of nanosecond mid-infrared pulses having frequency tunability, a narrow linewidth, and a high pulse energy. These pulses are obtained by frequency mixing between injection-seeded near-infrared pulses in potassium titanyl arsenate crystals. A continuous-wave external cavity laser diode or a Ti:sapphire ring laser is used as a tunable seeding source for the near-infrared pulses. The typical energy of the generated mid-infrared pulses is in the range of 0.4-1 mJ/pulse. The tuning wavelength ranges from 3142 to 4806 nm. A narrow linewidth of 1.4 GHz and good frequency reproducibility of the mid-infrared pulses are confirmed by observing a rovibrational absorption line of gaseous carbon monoxide at 4587 nm. △ Less

Submitted 18 January, 2017; v1 submitted 2 November, 2015; originally announced November 2015.

Long-lived neutral-kaon flux measurement for the KOTO experiment

Authors: T. Masuda, J. K. Ahn, S. Banno, M. Campbell, J. Comfort, Y. T. Duh, T. Hineno, Y. B. Hsiung, T. Inagaki, E. Iwai, N. Kawasaki, E. J. Kim, Y. J. Kim, J. W. Ko, T. K. Komatsubara, A. S. Kurilin, G. H. Lee, J. W. Lee, S. K. Lee, G. Y. Lim, J. Ma, D. MacFarland, Y. Maeda, T. Matsumura, R. Murayama , et al. (32 additional authors not shown)

Abstract: The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$,… ▽ More The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$, $K_L \rightarrow 2π^0$, and $K_L \rightarrow 2γ$ were used to measure the $K_L$ flux in the beam line in the 2013 KOTO engineering run. A Monte Carlo simulation was used to estimate the detector acceptance for these decays. Agreement was found between the simulation model and the experimental data, and the remaining systematic uncertainty was estimated at the 1.4\% level. The $K_L$ flux was measured as $(4.183 \pm 0.017_{\mathrm{stat.}} \pm 0.059_{\mathrm{sys.}}) \times 10^7$ $K_L$ per $2\times 10^{14}$ protons on a 66-mm-long Au target. △ Less

Submitted 7 January, 2016; v1 submitted 11 September, 2015; originally announced September 2015.

Comments: 27 pages, 16 figures. To be appeared in Progress of Theoretical and Experimental Physics

Journal ref: Prog. Theor. Exp. Phys. 2016, 013C03

Externally triggered coherent two-photon emission from hydrogen molecules

Authors: Yuki Miyamoto, Hideaki Hara, Takahiko Masuda, Noboru Sasao, Minoru Tanaka, Satoshi Uetake, Akihiro Yoshimi, Koji Yoshimura, Motohiko Yoshimura

Abstract: We report coherent enhancement of two-photon emission from the excited vibrational state of molecular hydrogen triggered by irradiating mid-infrared pulses externally. We previously observed the two-photon emission triggered by the internally generated fourth Stokes photons. By injecting independent mid-infrared pulses externally, it is possible to control experimental parameters and investigate t… ▽ More We report coherent enhancement of two-photon emission from the excited vibrational state of molecular hydrogen triggered by irradiating mid-infrared pulses externally. We previously observed the two-photon emission triggered by the internally generated fourth Stokes photons. By injecting independent mid-infrared pulses externally, it is possible to control experimental parameters and investigate the mechanism in more detail. In this article, we describe the two-photon emission using the external trigger pulses. Its spectrum and dependence on the energy and timing of the trigger pulse are presented along with numerical simulations based on the Maxwell-Bloch equations. The measured number of emitted photons is 6 10^11 photons/pulse and the resulting enhancement factor from the spontaneous emission is more than 10^18. This value is three orders of magnitude higher than that of the previous experiment. External control of emission process is expected to be essential for observation of weaker process of radiative emission of neutrino pair. △ Less

Submitted 28 May, 2015; originally announced May 2015.

An aerogel Cherenkov detector for multi-GeV photon detection with low sensitivity to neutrons

Authors: Y. Maeda, N. Kawasaki, T. Masuda, H. Morii, D. Naito, Y. Nakajima, H. Nanjo, T. Nomura, N. Sasao, S. Seki, K. Shiomi, T. Sumida, Y. Tajima

Abstract: We describe a novel photon detector which operates under an intense flux of neutrons. It is composed of lead-aerogel sandwich counter modules. Its salient features are high photon detection efficiency and blindness to neutrons. As a result of Monte Carlo (MC) simulations, the efficiency for photons with the energy larger than 1 GeV is expected to be higher than 99.5% and that for 2 GeV/$c$ neutron… ▽ More We describe a novel photon detector which operates under an intense flux of neutrons. It is composed of lead-aerogel sandwich counter modules. Its salient features are high photon detection efficiency and blindness to neutrons. As a result of Monte Carlo (MC) simulations, the efficiency for photons with the energy larger than 1 GeV is expected to be higher than 99.5% and that for 2 GeV/$c$ neutrons less than 1%. The performance on the photon detection under such a large flux of neutrons was measured for a part of the detector. It was confirmed that the efficiency to photons with the energy $>$1 GeV was consistent with the MC expectation within 8.2% uncertainty. △ Less

Submitted 22 December, 2014; originally announced December 2014.

Comments: 16 pages, 16 figures, submitted to Prog. Theor. Exp. Phys

Photon-Veto Counters at the Outer Edge of the Endcap Calorimeter for the KOTO Experiment

Authors: T. Matsumura, T. Shinkawa, H. Yokota, E. Iwai, T. K. Komatsubara, J. W. Lee, G. Y. Lim, J. Ma, T. Masuda, H. Nanjo, T. Nomura, Y. Odani, Y. D. Ri, K. Shiomi, Y. Sugiyama, S. Suzuki, M. Togawa, Y. Wah, H. Watanabe, T. Yamanaka

Abstract: The Outer-Edge Veto (OEV) counter subsystem for extra-photon detection from the backgrounds for the? $K^0_L\rightarrowπ^0ν\barν$ decay is located at the outer edge of the endcap CsI calorimeter of the KOTO experiment at J-PARC. The subsystem is composed of 44 counters with different cross-sectional shapes. All counters are made of lead and scintillator plates and read out through wavelength-shifti… ▽ More The Outer-Edge Veto (OEV) counter subsystem for extra-photon detection from the backgrounds for the? $K^0_L\rightarrowπ^0ν\barν$ decay is located at the outer edge of the endcap CsI calorimeter of the KOTO experiment at J-PARC. The subsystem is composed of 44 counters with different cross-sectional shapes. All counters are made of lead and scintillator plates and read out through wavelength-shifting fibers. In this paper, we discuss the design and performances of the OEV counters under heavy load ($\sim8$ tons/m$^2$) in vacuum. For 1-MeV energy deposit, the average light yield and time resolution are 20.9 photo-electrons and 1.5 ns, respectively. Although no pronounced peak by minimum-ionizing particles is observed in the energy distributions, an energy calibration method with cosmic rays works well in monitoring the gain stability with an accuracy of a few percent. △ Less

Submitted 18 May, 2015; v1 submitted 29 September, 2014; originally announced September 2014.

Comments: 23 figures, To be published in Nuclear Instruments and Methods in Physics Research Section A

Journal ref: Nucl. Inst. and Meth. A 795 (2015) 19-31

Observation of coherent two-photon emission from the first vibrationally-excited state of hydrogen molecules

Authors: Yuki Miyamoto, Hideaki Hara, Susumu Kuma, Takahiko Masuda, Masayuki Katsuragawa, Itsuo Nakano, Chiaki Ohae, Noboru Sasao, Minoru Tanaka, Satoshi Uetake, Akihiro Yoshimi, Koji Yoshimura, Motohiko Yoshimura

Abstract: In this paper, we describe an experiment which was conducted to explore the macro-coherent amplification mechanism using a two-photon emission process from the first vibrationally-excited state of para-hydrogen molecule. Large coherence in the initial state was prepared by the adiabatic Raman population transfer method, and the lowest Stokes sideband was used as a trigger field. We observed the co… ▽ More In this paper, we describe an experiment which was conducted to explore the macro-coherent amplification mechanism using a two-photon emission process from the first vibrationally-excited state of para-hydrogen molecule. Large coherence in the initial state was prepared by the adiabatic Raman population transfer method, and the lowest Stokes sideband was used as a trigger field. We observed the coherent two-photon emission consistent with the expectation of the paired super-radiance master equation. △ Less

Submitted 27 August, 2014; v1 submitted 9 June, 2014; originally announced June 2014.

Critical Bottleneck Size for Jamless Particle Flows in Two Dimensions

Authors: Takumi Masuda, Katsuhiro Nishinari, Andreas Schadschneider

Abstract: We propose a simple microscopic model for arching phenomena at bottlenecks. The dynamics of particles in front of a bottleneck is described by a one-dimensional stochastic cellular automaton on a semicircular geometry. The model reproduces oscillation phenomena due to formation and collapsing of arches. It predicts the existence of a critical bottleneck size for continuous particle flows. The depe… ▽ More We propose a simple microscopic model for arching phenomena at bottlenecks. The dynamics of particles in front of a bottleneck is described by a one-dimensional stochastic cellular automaton on a semicircular geometry. The model reproduces oscillation phenomena due to formation and collapsing of arches. It predicts the existence of a critical bottleneck size for continuous particle flows. The dependence of the jamming probability on the system size is approximated by the Gompertz function. The analytical results are in good agreement with simulations. △ Less

Submitted 26 March, 2014; originally announced March 2014.

Upgrade of Linac Control System with New Vme Controllers at Spring-8

Authors: T. Masuda, T. Ohata, T. Asaka, H. Dewa, T. Fukui, H. Hanaki, N. Hosoda, T. Kobayashi, M. Kodera, A. Mizuno, S. Nakajima, S. Suzuki, M. Takao, R. Tanaka, T. Taniuchi, Y. Taniuchi, H. Tomizawa, A. Yamashita, K. Yanagida

Abstract: We integrated an injector linac control system to the SPring-8 standard system on September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for New SUBARU, we had to minimize the hardware modification to reduce the… ▽ More We integrated an injector linac control system to the SPring-8 standard system on September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for New SUBARU, we had to minimize the hardware modification to reduce the time for the development and testing of the new control system. The integration method was almost the same as that of the integration of the booster synchrotron. We report here on the integration of the linac control system with emphasis on the upgrade of the VMEbus controllers and software involving the operating system Solaris 7 as the real-time OS. △ Less

Submitted 14 December, 2001; v1 submitted 15 November, 2001; originally announced November 2001.

Comments: 3 pages, 3 figures, ICALEPCS'01, PSN# WEAT005

Journal ref: eConf C011127 (2001) WEAT005

Data Acquisition System with Shared Memory Network

Authors: T. Masuda, T. Fukui, R. Tanaka, A. Yamashita

Abstract: The SPring-8 control system provides data acquisition software called Poller/Collector for periodic data taking. Its polling scheme does not support taking data synchronized with an event, and simultaneity in the data from the different VME systems is not guaranteed. Recently, requirement for fast and event-driven data acquisition has increased, and the synchronization of a set of data from the… ▽ More The SPring-8 control system provides data acquisition software called Poller/Collector for periodic data taking. Its polling scheme does not support taking data synchronized with an event, and simultaneity in the data from the different VME systems is not guaranteed. Recently, requirement for fast and event-driven data acquisition has increased, and the synchronization of a set of data from the different VME systems is requested. We added new data-taking software to the standard framework with a shared memory network. We designed the software on the VME by updating the original framework that was already used for feedback control. The data filling process on a PC stores sets of the synchronized data on a shared memory board to the database. The shared memory boards provide 250Mbit/s transmission rate and are linked with optical fiber cables. We will install the system to the linac beam position monitors data acquisition as the first application. △ Less

Submitted 3 December, 2001; v1 submitted 14 November, 2001; originally announced November 2001.

Comments: 3 pages, 3 figures, ICALEPCS '01, PSN# THAP046

Journal ref: eConf C011127 (2001) THAP046

Toward a Reliable Gigabit Network - an Upgrade of the Spring-8 Network

Authors: T. Fukui, M. Ishii, R. Tanaka, T. Masuda, T. Ohata

Abstract: The SPring-8 controls network has maintained accelerator operations in high reliability and shown good performance during the past years. To cope with the increase of loads on the network due to faster data acquisition and the addition of equipment data, networking hardware has been installed in the last few years. The upgraded network replaces the original FDDI backbone and switches with mixed… ▽ More The SPring-8 controls network has maintained accelerator operations in high reliability and shown good performance during the past years. To cope with the increase of loads on the network due to faster data acquisition and the addition of equipment data, networking hardware has been installed in the last few years. The upgraded network replaces the original FDDI backbone and switches with mixed FDDI/gigabit ethernet and Layer-3 switches. It is necessary to keep the double ring topology for the FDDI and introduce link aggregation technology for the gigabit ethernet to maintain the full redundancy and bandwidth of the system. This paper will discuss the network performance of the gigabit ethernet including its latency and redundancy. We also discuss a future plan for the network including Quality-of-Service over the gigabit ethernet. △ Less

Submitted 9 November, 2001; originally announced November 2001.

Comments: International Conference on Accelerator and Large Experimental Physics Control Systems San Jose, California, November 27-30, 2001, (THDT005), 3 pages, PDF genarated by MS-Word 98 on MAC

Journal ref: eConf C011127 (2001) THDT005

A Study of a Real-Time Operating System on the Intel-Based Vme Controllers

Authors: T. Ohata, T. Masuda

Abstract: In this paper, we described the performance differences between VME-based controllers, HP743rt/HP-RT and IA-based platforms. We measured some kind of real-time benchmarks and discussed a relation of architecture dependences. In this paper, we described the performance differences between VME-based controllers, HP743rt/HP-RT and IA-based platforms. We measured some kind of real-time benchmarks and discussed a relation of architecture dependences. △ Less

Submitted 17 December, 2001; v1 submitted 9 November, 2001; originally announced November 2001.

Comments: 3 pages paper for ICALEPCS 2001 conference, PDF format

Report number: THAP039

Journal ref: eConf C011127 (2001) THAP039