-
Inferring interaction potentials from stochastic particle trajectories
Authors:
Ella M. King,
Megan C. Engel,
Caroline Martin,
Alp M. Sunol,
Qian-Ze Zhu,
Sam S. Schoenholz,
Vinothan N. Manoharan,
Michael P. Brenner
Abstract:
Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these meas…
▽ More
Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these measurements are difficult and time-intensive, and often require conditions that are drastically different from in situ conditions of the system of interest. Moreover, existing methods of measuring interparticle potentials rely on constraining a small number of particles at equilibrium, placing limits on which interactions can be measured. We introduce a method for inferring interaction potentials directly from trajectory data of interacting particles. We explicitly solve the equations of motion to find a form of the potential that maximizes the probability of observing a known trajectory. Our method is valid for systems both in and out of equilibrium, is well-suited to large numbers of particles interacting in typical system conditions, and does not assume a functional form of the interaction potential. We apply our method to infer the interactions of colloidal spheres from experimental data, successfully extracting the range and strength of a depletion interaction from the motion of the particles.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Liouville-type results for time-dependent stratified water flows over variable bottom in the $β$-plane approximation
Authors:
Calin Martin
Abstract:
We consider here time-dependent three-dimensional stratified geophysical water flows of finite depth over a variable bottom with a free surface and an interface (separating two layers of constant and different densities). Under the assumption that the vorticity vectors in the two layers are constant, we prove that bounded solutions to the three-dimensional water waves equations in the $β$-plane ap…
▽ More
We consider here time-dependent three-dimensional stratified geophysical water flows of finite depth over a variable bottom with a free surface and an interface (separating two layers of constant and different densities). Under the assumption that the vorticity vectors in the two layers are constant, we prove that bounded solutions to the three-dimensional water waves equations in the $β$-plane approximation exist if and only if one of the horizontal components of the velocity, as well as its vertical component, are zero; the other horizontal component being constant. Moreover, the interface is flat, the free surface has a traveling character in the horizontal direction of the nonvanishing velocity component, being of general type in the other horizontal direction, and the pressure is hydrostatic in both layers. Unlike previous studies of three-dimensional flows with constant vorticity in each layer, we consider a non-flat bottom boundary and different constant vorticity vectors for the upper and lower layer.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Precise characterization of nanometer-scale systems using interferometric scattering microscopy and Bayesian analysis
Authors:
Xander M. de Wit,
Amelia W. Paine,
Caroline Martin,
Aaron M. Goldfain,
Rees F. Garmann,
Vinothan N. Manoharan
Abstract:
Interferometric scattering microscopy (iSCAT) can image the dynamics of nanometer-scale systems. The typical approach to analyzing interferometric images involves intensive processing, which discards data and limits the precision of measurements. We demonstrate an alternative approach: modeling the interferometric point spread function (iPSF) and fitting this model to data within a Bayesian framew…
▽ More
Interferometric scattering microscopy (iSCAT) can image the dynamics of nanometer-scale systems. The typical approach to analyzing interferometric images involves intensive processing, which discards data and limits the precision of measurements. We demonstrate an alternative approach: modeling the interferometric point spread function (iPSF) and fitting this model to data within a Bayesian framework. This approach yields best-fit parameters, including the particle's three-dimensional position and polarizability, as well as uncertainties and correlations between these parameters. Building on recent work, we develop a model that is parameterized for rapid fitting. The model is designed to work with Hamiltonian Monte Carlo techniques that leverage automatic differentiation. We validate this approach by fitting the model to interferometric images of colloidal nanoparticles. We apply the method to track a diffusing particle in three dimensions, to directly infer the diffusion coefficient of a nanoparticle without calculating a mean-square displacement, and to quantify the ejection of DNA from an individual lambda phage virus, demonstrating that the approach can be used to infer both static and dynamic properties of nanoscale systems.
△ Less
Submitted 12 September, 2023; v1 submitted 4 July, 2023;
originally announced July 2023.
-
FIB-SEM investigation and uniaxial compression of flexible graphite
Authors:
Emanuele Solfiti,
Di Wan,
Ambra Celotto,
Nicola Solieri,
Pablo Andreu Munoz,
Rui Franqueira Ximenes,
Jorge Maestre Heredia,
Claudio Leopoldo Torregrosa Martin,
Antonio Perillo Marcone Francois-Xavier Nuiry,
Antonio Alvaro,
Filippo Berto,
Marco Calviani
Abstract:
Flexible graphite (FG) with 1 - 1.2 g/cm$^3$ density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dum** system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dum** devices, and the need for a calibrated material model suitable for high-le…
▽ More
Flexible graphite (FG) with 1 - 1.2 g/cm$^3$ density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dum** system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dum** devices, and the need for a calibrated material model suitable for high-level FE simulations has been prioritized. This work sets the basic knowledge to develop a material model for FG suitable to this aim. A review of the FG properties available in literature is first given, followed by FIB-SEM (Focused Ion Beam - Scanning Electron Microscopy) microstructure investigation and monotonic and cyclic uniaxial compression tests. Similarities with other well-known groups of materials such as crushable foams, crumpled materials and compacted powders have been discussed. A simple 1D phenomenological model has been used to fit the experimental stress-strain curves and the accuracy of the result supports the assumptions that the graphite-like microstructure and the crumpled meso-structure play the major role under out-of-plane uniaxial compression.
△ Less
Submitted 8 April, 2023;
originally announced April 2023.
-
A-BASE-DE-PROS: una implementación práctica de los Objetivos de Desarrollo Sostenible en la Universidad Politécnica de Madrid
Authors:
Patricia Almendros,
Silvia Otegui,
Alejandro Nares,
Laura del Fresno,
Javier Ablanque,
Irene Blanco,
Juan Ramón Ferrer,
Sonia Benito,
Carmen Lopez,
Sonia García,
León Fernández,
Sergio Zubelzu,
Raúl Sánchez,
Paloma Esteve,
Rosa María Benito,
Juan Carlos Losada,
Antonio Saa,
Gabriel Gascó,
Ana M. Méndez,
Mónica Montoya,
Marina de Francisco,
Jesús Ruiz,
Samuel Seoanez,
Sara Castilla,
Dámaris Fuente
, et al. (24 additional authors not shown)
Abstract:
The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production…
▽ More
The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production and consumption (A-BASE-DE-PROS)', which uses the SDG 12 as a guide line to raise the awareness of the importance of the 2030 Agenda among undergraduate and secondary-school students. In general, the service-based learning has increased the knowledge of the SDGs among the students. Furthermore, most of the (university and secondary) students found the service-learning
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Wrinkling and crumpling in twisted few and multilayer CVD graphene: High density of edge modes influencing Raman spectra
Authors:
D. Nikolaievskyi,
M. Torregrosa,
A. Merlen,
S. Clair,
O. Chuzel,
J. -L. Parrain,
T. Neisus,
A. Campos,
M. Cabie,
C. Martin,
C. Pardanaud
Abstract:
Richness and complexity of Raman spectra related to graphene materials is established from years to decades, with, among others: the well-known G, D, 2D,... bands plus a plethora of weaker bands related to disorder behavior, do**, stress, crystal orientation or stacking information. Herein, we report on how to detect crumpling effects in Raman spectra, using a large variety of few and multilayer…
▽ More
Richness and complexity of Raman spectra related to graphene materials is established from years to decades, with, among others: the well-known G, D, 2D,... bands plus a plethora of weaker bands related to disorder behavior, do**, stress, crystal orientation or stacking information. Herein, we report on how to detect crumpling effects in Raman spectra, using a large variety of few and multilayer graphene. The main finding is that these crumples enhance the G band intensity like it does with twisted bi layer graphene. We updated the D over G band intensity ratio versus G band width plot, which is generally used to disentangle point and linear defects origin, by reporting surface defects created by crumples. Moreover, we report for the first time on the existence 23 resonant additional bands at 633 nm. We attribute them to edge modes formed by high density of crumples. We use Raman plots (2D bands versus G band positions and widths) to gain qualitative information about the way layers are stacked.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam
Authors:
Christopher Madrid,
Ryan Heller,
Claudio San Martín,
Shirsendu Nanda,
Artur Apresyan,
William K. Brooks,
Wei Chen,
Gabriele Giacomini,
Ohannes Kamer Köseyan,
Sergey Los,
Cristián Peña,
René Rios,
Alessandro Tricoli,
Si Xie,
Zhenyu Ye
Abstract:
We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-bas…
▽ More
We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 micron and 32 ps resolutions from strips of 1 cm length and 500 micron pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC.
△ Less
Submitted 20 April, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Dynamics, scaling behavior, and control of nuclear wrinkling
Authors:
Jonathan A. Jackson,
Nicolas Romeo,
Alexander Mietke,
Keaton J. Burns,
Jan F. Totz,
Adam C. Martin,
Jörn Dunkel,
Jasmin Imran Alsous
Abstract:
The cell nucleus is enveloped by a complex membrane, whose wrinkling has been implicated in disease and cellular aging. The biophysical dynamics and spectral evolution of nuclear wrinkling during multicellular development remain poorly understood due to a lack of direct quantitative measurements. Here, we combine live-imaging experiments, theory, and simulations to characterize the onset and dynam…
▽ More
The cell nucleus is enveloped by a complex membrane, whose wrinkling has been implicated in disease and cellular aging. The biophysical dynamics and spectral evolution of nuclear wrinkling during multicellular development remain poorly understood due to a lack of direct quantitative measurements. Here, we combine live-imaging experiments, theory, and simulations to characterize the onset and dynamics of nuclear wrinkling during egg development in the fruit fly, Drosophila melanogaster, when nurse cell nuclei increase in size and display stereotypical wrinkling behavior. A spectral analysis of three-dimensional high-resolution data from several hundred nuclei reveals a robust asymptotic power-law scaling of angular fluctuations consistent with renormalization and scaling predictions from a nonlinear elastic shell model. We further demonstrate that nuclear wrinkling can be reversed through osmotic shock and suppressed by microtubule disruption, providing tunable physical and biological control parameters for probing mechanical properties of the nuclear envelope. Our findings advance the biophysical understanding of nuclear membrane fluctuations during early multicellular development.
△ Less
Submitted 25 June, 2023; v1 submitted 20 October, 2022;
originally announced October 2022.
-
What's for Lunch? A systematic ordering of foods in the Soup-Salad-Sandwich phase space
Authors:
Madelyn Leembruggen,
Caroline Martin
Abstract:
The statistical physics of phase transitions has been hugely successful at describing numerous natural, physical, and technological phenomena, and now a rigorous examination of the phase space of the culinary regime is likewise ripe for the picking. Despite great demand for the resolution of many scientific debates over the taxonomy of food, past attempts have failed to account for complex phase b…
▽ More
The statistical physics of phase transitions has been hugely successful at describing numerous natural, physical, and technological phenomena, and now a rigorous examination of the phase space of the culinary regime is likewise ripe for the picking. Despite great demand for the resolution of many scientific debates over the taxonomy of food, past attempts have failed to account for complex phase behavior and co-existence, and have thus left the public hungry for a more substantial theory. By applying the principles of statistical physics and thermodynamics, we here map out the complete phase space of all culinary dishes and find three distinct phase regimes: Soup, Salad, and Sandwich. We consider the effect of different state variables on these phase boundaries, as well as regions of co-existence and triple points. With this complete 3-dimensional phase diagram of all foods, we can conclusively answer many bitter debates, including the imperishable question "is a hotdog a sandwich?" The answer: yes.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Hamiltonian approach to modelling interfacial internal waves over variable bottom
Authors:
Rossen I. Ivanov,
Calin I. Martin,
Michail D. Todorov
Abstract:
We study the effects of an uneven bottom on the internal wave propagation in the presence of stratification and underlying non-uniform currents. Thus, the presented models incorporate vorticity (wave-current interactions), geophysical effects (Coriolis force) and a variable bathymetry. An example of the physical situation described above is well illustrated by the equatorial internal waves in the…
▽ More
We study the effects of an uneven bottom on the internal wave propagation in the presence of stratification and underlying non-uniform currents. Thus, the presented models incorporate vorticity (wave-current interactions), geophysical effects (Coriolis force) and a variable bathymetry. An example of the physical situation described above is well illustrated by the equatorial internal waves in the presence of the Equatorial Undercurrent (EUC). We find that the interface (physically coinciding with the thermocline and the pycnocline) satisfies in the long wave approximation a KdV-mKdV type equation with variable coefficients. The soliton propagation over variable depth leads to effects such as soliton fission, which is analysed and studied numerically as well.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam
Authors:
Ryan Heller,
Christopher Madrid,
Artur Apresyan,
William K. Brooks,
Wei Chen,
Gabriele D'Amen,
Gabriele Giacomini,
Ikumi Goya,
Kazuhiko Hara,
Sayuka Kita,
Sergey Los,
Adam Molnar,
Koji Nakamura,
Cristián Peña,
Claudio San Martín,
Alessandro Tricoli,
Tatsuki Ueda,
Si Xie
Abstract:
We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows deta…
▽ More
We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch.
△ Less
Submitted 29 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
EP-PINNs: Cardiac Electrophysiology Characterisation using Physics-Informed Neural Networks
Authors:
Clara Herrero Martin,
Alon Oved,
Rasheda A Chowdhury,
Elisabeth Ullmann,
Nicholas S Peters,
Anil A Bharath,
Marta Varela
Abstract:
Accurately inferring underlying electrophysiological (EP) tissue properties from action potential recordings is expected to be clinically useful in the diagnosis and treatment of arrhythmias such as atrial fibrillation, but it is notoriously difficult to perform. We present EP-PINNs (Physics-Informed Neural Networks), a novel tool for accurate action potential simulation and EP parameter estimatio…
▽ More
Accurately inferring underlying electrophysiological (EP) tissue properties from action potential recordings is expected to be clinically useful in the diagnosis and treatment of arrhythmias such as atrial fibrillation, but it is notoriously difficult to perform. We present EP-PINNs (Physics-Informed Neural Networks), a novel tool for accurate action potential simulation and EP parameter estimation, from sparse amounts of EP data. We demonstrate, using 1D and 2D in silico data, how EP-PINNs are able to reconstruct the spatio-temporal evolution of action potentials, whilst predicting parameters related to action potential duration (APD), excitability and diffusion coefficients. EP-PINNs are additionally able to identify heterogeneities in EP properties, making them potentially useful for the detection of fibrosis and other localised pathology linked to arrhythmias. Finally, we show EP-PINNs effectiveness on biological in vitro preparations, by characterising the effect of anti-arrhythmic drugs on APD using optical map** data. EP-PINNs are a promising clinical tool for the characterisation and potential treatment guidance of arrhythmias.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Long-Lived Highly Emissive MOFs as Potential Candidates for Multiphotonic Applications
Authors:
Mario Gutiérrez,
Cristina Martín,
Johan Hofkens,
**-Chong Tan
Abstract:
Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approac…
▽ More
Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approach to address this shortcoming is by inhibiting the molecular motions/vibrations by employing a fixed matrix as afforded by a metal-organic framework (MOF). There, the organic chromophores are confined in a crystalline framework, and the structure-property relationship can be designed to get RTP/TADF. Inspired by this, the present work explores the relation between the linker arrangement and the physicochemical properties of two isochemical MOFs with different crystalline structures. The denser MOF exhibits a long-lived green RTP due to a hyperfine coupling of the linkers. On the other hand, the more porous MOF presents a long-lived temperature-dependent turquoise emission, reflecting the influence of the TADF. Hence, this study provides a huge advance about the potential of MOFs to undergo RTP and TADF emission, and at the same time, demonstrates their potential applicability in a wide range of photonic technologies, including physical and chemical sensing and the first example of a MOF-LED based on RTP-MOFs.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples
Authors:
C Pardanaud,
M Kumar,
P Roubin,
C Martin,
Y Ferro,
J Denis,
A Widdowson,
D Douai,
M Baldwin,
A Založnik,
C Lungu,
C Porosnicu,
P Dinca,
T Dittmar,
A Hakola
Abstract:
We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limit…
▽ More
We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limiters. We give a way to disentangle that BeD 2 signature from other signatures falling in the same spectroscopic range and mainly related to other phenomena. We also analyze the Raman characteristics of the JET sample defects. These results could help in the interpretation of D thermal desorption spectra and in future analyses of JET thick Be deposit divertor tiles.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
The Long Period of 3He-rich Solar Energetic Particles Measured by Solar Orbiter on 2020 November 17-23
Authors:
R. Bucik,
G. M. Mason,
R. Gomez-Herrero,
D. Lario,
L. Balmaceda,
N. V. Nitta,
V. Krupar,
N. Dresing,
G. C. Ho,
R. C. Allen,
F. Carcaboso,
J. Rodriguez-Pacheco,
F. Schuller,
A. Warmuth,
R. F. Wimmer-Schweingruber,
J. L. Freiherr von Forstner,
G. B. Andrews,
L. Berger,
I. Cernuda,
F. Espinosa Lara,
W. J. Lees,
C. Martin,
D. Pacheco,
M. Prieto,
S. Sanchez-Prieto
, et al. (9 additional authors not shown)
Abstract:
We report observations of a relatively long period of 3He-rich solar energetic particles (SEPs) measured by Solar Orbiter. The period consists of several well-resolved ion injections. The high-resolution STEREO-A imaging observations reveal that the injections coincide with EUV jets/brightenings near the east limb, not far from the nominal magnetic connection of Solar Orbiter. The jets originated…
▽ More
We report observations of a relatively long period of 3He-rich solar energetic particles (SEPs) measured by Solar Orbiter. The period consists of several well-resolved ion injections. The high-resolution STEREO-A imaging observations reveal that the injections coincide with EUV jets/brightenings near the east limb, not far from the nominal magnetic connection of Solar Orbiter. The jets originated in two adjacent, large, and complex active regions as observed by the Solar Dynamics Observatory when the regions rotated to the Earth's view. It appears that the sustained ion injections were related to the complex configuration of the sunspot group and the long period of 3He-rich SEPs to the longitudinal extent covered by the group during the analyzed time period.
△ Less
Submitted 12 September, 2021;
originally announced September 2021.
-
First year of energetic particle measurements in the inner heliosphere with Solar Orbiter's Energetic Particle Detector
Authors:
R. F. Wimmer-Schweingruber,
N. Janitzek,
D. Pacheco,
I. Cernuda,
F. Espinosa Lara,
R. Gómez-Herrero,
G. M. Mason,
R. C. Allen,
Z. G. Xu,
F. Carcaboso,
A. Kollhoff,
P. Kühl,
J. L. Freiherr von Forstner,
L. Berger,
J. Rodriguez-Pacheco,
G. C. Ho,
G. B. Andrews,
V. Angelini,
A. Aran,
S. Boden,
S. I. Böttcher,
A. Carrasco,
N. Dresing,
S. Eldrum,
R. Elftmann
, et al. (23 additional authors not shown)
Abstract:
Solar Orbiter strives to unveil how the Sun controls and shapes the heliosphere and fills it with energetic particle radiation. To this end, its Energetic Particle Detector (EPD) has now been in operation, providing excellent data, for just over a year. EPD measures suprathermal and energetic particles in the energy range from a few keV up to (near-) relativistic energies (few MeV for electrons an…
▽ More
Solar Orbiter strives to unveil how the Sun controls and shapes the heliosphere and fills it with energetic particle radiation. To this end, its Energetic Particle Detector (EPD) has now been in operation, providing excellent data, for just over a year. EPD measures suprathermal and energetic particles in the energy range from a few keV up to (near-) relativistic energies (few MeV for electrons and about 500 MeV/nuc for ions). We present an overview of the initial results from the first year of operations and we provide a first assessment of issues and limitations. During this first year of operations of the Solar Orbiter mission, EPD has recorded several particle events at distances between 0.5 and 1 au from the Sun. We present dynamic and time-averaged energy spectra for ions that were measured with a combination of all four EPD sensors, namely: the SupraThermal Electron and Proton sensor (STEP), the Electron Proton Telescope (EPT), the Suprathermal Ion Spectrograph (SIS), and the High-Energy Telescope (HET) as well as the associated energy spectra for electrons measured with STEP and EPT. We illustrate the capabilities of the EPD suite using the 10-11 December 2020 solar particle event. This event showed an enrichment of heavy ions as well as $^3$He, for which we also present dynamic spectra measured with SIS. The high anisotropy of electrons at the onset of the event and its temporal evolution is also shown using data from these sensors. We discuss the ongoing in-flight calibration and a few open instrumental issues using data from the 21 July and the 10-11 December 2020 events and give guidelines and examples for the usage of the EPD data. We explain how spacecraft operations may affect EPD data and we present a list of such time periods in the appendix. A list of the most significant particle enhancements as observed by EPT during this first year is also provided.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Estimating covariant Lyapunov vectors from data
Authors:
Christoph Martin,
Nahal Sharafi,
Sarah Hallerberg
Abstract:
Covariant Lyapunov vectors characterize the directions along which perturbations in dynamical systems grow. They have also been studied as predictors of critical transitions and extreme events. For many applications like, for example, prediction, it is necessary to estimate the vectors from data since model equations are unknown for many interesting phenomena. We propose a novel method for estimat…
▽ More
Covariant Lyapunov vectors characterize the directions along which perturbations in dynamical systems grow. They have also been studied as predictors of critical transitions and extreme events. For many applications like, for example, prediction, it is necessary to estimate the vectors from data since model equations are unknown for many interesting phenomena. We propose a novel method for estimating covariant Lyapunov vectors based on data records without knowing the underlying equations of the system. In contrast to previous approaches, our approach can be applied to high-dimensional data-sets. We demonstrate that this purely data-driven approach can accurately estimate covariant Lyapunpov vectors from data records generated by low and high-dimensional dynamical systems. The highest dimension of a time-series from which covariant Lyapunov vectors were estimated in this contribution is 128. Being able to infer covariant Lyapunov vectors from data-records could encourage numerous future applications in data-analysis and data-based predictions.
△ Less
Submitted 11 October, 2021; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Azimuthal equatorial flows in spherical coordinates with discontinuous stratification
Authors:
Calin Martin
Abstract:
We are concerned here with an exact solution to the governing equations for geophysical fluid dynamics in spherical coordinates which incorporates discontinuous fluid stratification. This solution represents a steady, purely--azimuthal equatorial flow with an associated free-surface and an interface separating two fluid regions, each of which having its own continuous distribution of density. Howe…
▽ More
We are concerned here with an exact solution to the governing equations for geophysical fluid dynamics in spherical coordinates which incorporates discontinuous fluid stratification. This solution represents a steady, purely--azimuthal equatorial flow with an associated free-surface and an interface separating two fluid regions, each of which having its own continuous distribution of density. However, the two density functions do not match along the interface. Following the derivation of the solution we demonstrate that there is a well-defined relationship between the imposed pressure at the free-surface and the resulting distortion of the surface's shape. Moreover, imposing the continuity of the pressure along the interface generates an equation that describes (implicitly) the shape of the interface. Interestingly, it turns out that the interface defining function has infinite regularity.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
Authors:
ALICE ITS project,
:,
G. Aglieri Rinella,
M. Agnello,
B. Alessandro,
F. Agnese,
R. S. Akram,
J. Alme,
E. Anderssen,
D. Andreou,
F. Antinori,
N. Apadula,
P. Atkinson,
R. Baccomi,
A. Badalà,
A. Balbino,
C. Bartels,
R. Barthel,
F. Baruffaldi,
I. Belikov,
S. Beole,
P. Becht,
A. Bhatti,
M. Bhopal,
N. Bianchi
, et al. (230 additional authors not shown)
Abstract:
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra…
▽ More
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance.
In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties.
△ Less
Submitted 17 August, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
Improving holographic particle characterization by modeling spherical aberration
Authors:
Caroline Martin,
Brian Leahy,
Vinothan Manoharan
Abstract:
Holographic microscopy combined with forward modeling and inference allows colloidal particles to be characterized and tracked in three dimensions with high precision. However, current models ignore the effects of optical aberrations on hologram formation. We investigate the effects of spherical aberration on the structure of single-particle holograms and on the accuracy of particle characterizati…
▽ More
Holographic microscopy combined with forward modeling and inference allows colloidal particles to be characterized and tracked in three dimensions with high precision. However, current models ignore the effects of optical aberrations on hologram formation. We investigate the effects of spherical aberration on the structure of single-particle holograms and on the accuracy of particle characterization. We find that in a typical experimental setup, spherical aberration can result in systematic shifts of about 2% in the inferred refractive index and radius. We show that fitting with a model that accounts for spherical aberration decreases this aberration-dependent error by a factor of two or more, even when the level of spherical aberration in the optical train is unknown. With the new generative model, the inferred parameters are consistent across different levels of aberration, making particle characterization more robust.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Hybrid Machine Learning for Scanning Near-field Optical Spectroscopy
Authors:
Xinzhong Chen,
Ziheng Yao,
Suheng Xu,
A. S. McLeod,
Stephanie N. Gilbert Corder,
Yueqi Zhao,
Makoto Tsuneto,
Hans A. Bechtel,
Michael C. Martin,
G. L. Carr,
M. M. Fogler,
Stefan G. Stanciu,
D. N. Basov,
Mengkun Liu
Abstract:
The underlying physics behind an experimental observation often lacks a simple analytical description. This is especially the case for scanning probe microscopy techniques, where the interaction between the probe and the sample is nontrivial. Realistic modeling to include the details of the probe is always exponentially more difficult than its "spherical cow" counterparts. On the other hand, a wel…
▽ More
The underlying physics behind an experimental observation often lacks a simple analytical description. This is especially the case for scanning probe microscopy techniques, where the interaction between the probe and the sample is nontrivial. Realistic modeling to include the details of the probe is always exponentially more difficult than its "spherical cow" counterparts. On the other hand, a well-trained artificial neural network based on real data can grasp the hidden correlation between the signal and sample properties. In this work, we show that, via a combination of model calculation and experimental data acquisition, a physics-infused hybrid neural network can predict the tip-sample interaction in the widely used scattering-type scanning near-field optical microscope. This hybrid network provides a long-sought solution for accurate extraction of material properties from tip-specific raw data. The methodology can be extended to other scanning probe microscopy techniques as well as other data-oriented physical problems in general.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
THz Near-Field Imaging of Extreme Subwavelength Metal Structures
Authors:
Xinzhong Chen,
Xiao Liu,
Xiangdong Guo,
Shu Chen,
Hai Hu,
Elizaveta Nikulina,
Xinlin Ye,
Ziheng Yao,
Hans A. Bechtel,
Michael C. Martin,
G. Lawrence Carr,
Qing Dai,
Songlin Zhuang,
Qing Hu,
Yiming Zhu,
Rainer Hillenbrand,
Mengkun Liu,
Guanjun You
Abstract:
Modern scattering-type scanning near-field optical microscopy (s-SNOM) has become an indispensable tool in material research. However, as the s-SNOM technique marches into the far-infrared (IR) and terahertz (THz) regimes, emerging experiments sometimes produce puzzling results. For example, anomalies in the near-field optical contrast have been widely reported. In this Letter, we systematically i…
▽ More
Modern scattering-type scanning near-field optical microscopy (s-SNOM) has become an indispensable tool in material research. However, as the s-SNOM technique marches into the far-infrared (IR) and terahertz (THz) regimes, emerging experiments sometimes produce puzzling results. For example, anomalies in the near-field optical contrast have been widely reported. In this Letter, we systematically investigate a series of extreme subwavelength metallic nanostructures via s-SNOM near-field imaging in the GHz to THz frequency range. We find that the near-field material contrast is greatly impacted by the lateral size of the nanostructure, while the spatial resolution is practically independent of it. The contrast is also strongly affected by the connectivity of the metallic structures to a larger metallic ground plane. The observed effect can be largely explained by a quasi-electrostatic analysis. We also compare the THz s-SNOM results to those of the mid-IR regime, where the size-dependence becomes significant only for smaller structures. Our results reveal that the quantitative analysis of the near-field optical material contrasts in the long-wavelength regime requires a careful assessment of the size and configuration of metallic (optically conductive) structures.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Radial Evolution of the April 2020 Stealth Coronal Mass Ejection between 0.8 and 1 AU -- A Comparison of Forbush Decreases at Solar Orbiter and Earth
Authors:
Johan L. Freiherr von Forstner,
Mateja Dumbović,
Christian Möstl,
**gnan Guo,
Athanasios Papaioannou,
Robert Elftmann,
Zigong Xu,
Jan Christoph Terasa,
Alexander Kollhoff,
Robert F. Wimmer-Schweingruber,
Javier Rodríguez-Pacheco,
Andreas J. Weiss,
Jürgen Hinterreiter,
Tanja Amerstorfer,
Maike Bauer,
Anatoly V. Belov,
Maria A. Abunina,
Timothy Horbury,
Emma E. Davies,
Helen O'Brien,
Robert C. Allen,
G. Bruce Andrews,
Lars Berger,
Sebastian Boden,
Ignacio Cernuda Cangas
, et al. (18 additional authors not shown)
Abstract:
Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic r…
▽ More
Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic ray count rate using its single detector counters. The analytical ForbMod model is applied to the FD measurements to reproduce the Forbush decrease at both locations. Input parameters for the model are derived from both in situ and remote-sensing observations of the CME. Results. The very slow (~350 km/s) stealth CME caused a FD with an amplitude of 3 % in the low-energy cosmic ray measurements at HET and 2 % in a comparable channel of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter, as well as a 1 % decrease in neutron monitor measurements. Significant differences are observed in the expansion behavior of the CME at different locations, which may be related to influence of the following high speed solar wind stream. Under certain assumptions, ForbMod is able to reproduce the observed FDs in low-energy cosmic ray measurements from HET as well as CRaTER, but with the same input parameters, the results do not agree with the FD amplitudes at higher energies measured by neutron monitors on Earth. We study these discrepancies and provide possible explanations. Conclusions. This study highlights that the novel measurements of the Solar Orbiter can be coordinated with other spacecraft to improve our understanding of space weather in the inner heliosphere. Multi-spacecraft observations combined with data-based modeling are also essential to understand the propagation and evolution of CMEs as well as their space weather impacts.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
On rotational flows with discontinuous vorticity beneath steady water waves near stagnation
Authors:
Lin Chen,
Biswajit Basu,
Calin-I Martin
Abstract:
We numerically investigate the flow structure of periodic steady water waves of fixed relative mass flux propagating on rotational flows with piece-wise constant vorticity. We show that for wave solutions along the global bifurcation diagram the stagnation point can first occur internally or at the bottom, and then again occurs at the crest with further increase in wave height. We observe that the…
▽ More
We numerically investigate the flow structure of periodic steady water waves of fixed relative mass flux propagating on rotational flows with piece-wise constant vorticity. We show that for wave solutions along the global bifurcation diagram the stagnation point can first occur internally or at the bottom, and then again occurs at the crest with further increase in wave height. We observe that the bifurcation diagram has a new branch which is not connected to the trivial solution. Furthermore, we present an in-depth discussion of the results on pressure distributions and particle trajectories beneath large-amplitude steady waves near stagnation. We also expand on previous results concerning the amplitude and mass flux of steady water waves traveling on rotational flows with discontinuous vorticity.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Global to local impacts on atmospheric CO2 caused by COVID-19 lockdown
Authors:
Ning Zeng,
Pengfei Han,
Di Liu,
Zhiqiang Liu,
Tomohiro Oda,
Cory Martin,
Zhu Liu,
Bo Yao,
Wanqi Sun,
Pucai Wang,
Qixiang Cai,
Russell Dickerson,
Shamil Maksyutov
Abstract:
The world-wide lockdown in response to the COVID-19 pandemic in year 2020 led to economic slowdown and large reduction of fossil fuel CO2 emissions, but it is unclear how much it would reduce atmospheric CO2 concentration, and whether it can be observed. We estimated that a 7.9% reduction in emissions for 4 months would result in a 0.25 ppm decrease in the Northern Hemisphere CO2, an increment tha…
▽ More
The world-wide lockdown in response to the COVID-19 pandemic in year 2020 led to economic slowdown and large reduction of fossil fuel CO2 emissions, but it is unclear how much it would reduce atmospheric CO2 concentration, and whether it can be observed. We estimated that a 7.9% reduction in emissions for 4 months would result in a 0.25 ppm decrease in the Northern Hemisphere CO2, an increment that is within the capability of current CO2 analyzers, but is a few times smaller than natural CO2 variabilities caused by weather and the biosphere such as El Nino. We used a state-of-the-art atmospheric transport model to simulate CO2, driven by a new daily fossil fuel emissions dataset and hourly biospheric fluxes from a carbon cycle model forced with observed climate variability. Our results show a 0.13 ppm decrease in atmospheric column CO2 anomaly averaged over 50S-50N for the period February-April 2020 relative to a 10-year climatology. A similar decrease was observed by the carbon satellite GOSAT3. Using model sensitivity experiments, we further found that COVID, the biosphere and weather contributed 54%, 23%, and 23% respectively. This seemingly small change stands out as the largest sub-annual anomaly in the last 10 years. Measurements from global ground stations were analyzed. At city scale, on-road CO2 enhancement measured in Bei**g shows reduction of 20-30 ppm, consistent with drastically reduced traffic during the lockdown. The ability of our current carbon monitoring systems in detecting the small and short-lasting COVID signal on the background of fossil fuel CO2 accumulated over the last two centuries is encouraging. The COVID-19 pandemic is an unintended experiment whose impact suggests that to keep atmospheric CO2 at a climate-safe level will require sustained effort of similar magnitude and improved accuracy and expanded spatiotemporal coverage of our monitoring systems.
△ Less
Submitted 24 October, 2020;
originally announced October 2020.
-
Capillary-Gravity Water Waves: Modified Flow Force Formulation
Authors:
Biswajit Basu,
Calin Iulian Martin
Abstract:
The classical irrotational capillary-gravity water wave problem described by the Euler equations with a nonlinear free surface boundary condition over a flat bed is considered. A modified flow force has been defined and a new formulation of capillary-gravity waves in the framework of the modified flow force function has been developed. Using bifurcation theory, the local existence of waves of smal…
▽ More
The classical irrotational capillary-gravity water wave problem described by the Euler equations with a nonlinear free surface boundary condition over a flat bed is considered. A modified flow force has been defined and a new formulation of capillary-gravity waves in the framework of the modified flow force function has been developed. Using bifurcation theory, the local existence of waves of small amplitude is proved.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Explicit and exact solutions concerning the Antarctic Circumpolar Current with variable density in spherical coordinates
Authors:
Calin Iulian Martin,
Ronald Quirchmayr
Abstract:
We use spherical coordinates to devise a new exact solution to the governing equations of geophysical fluid dynamics for an inviscid and incompressible fluid with a general density distribution and subjected to forcing terms. The latter are of paramount importance for the modeling of realistic flows-that is, flows that are observed in some averaged sense in the ocean. Owing to the employment of sp…
▽ More
We use spherical coordinates to devise a new exact solution to the governing equations of geophysical fluid dynamics for an inviscid and incompressible fluid with a general density distribution and subjected to forcing terms. The latter are of paramount importance for the modeling of realistic flows-that is, flows that are observed in some averaged sense in the ocean. Owing to the employment of spherical coordinates we do not need to resort to approximations (e.g. of $f$- and $β$-plane type) that simplify the geometry in the governing equations. Our explicit solution represents a steady purely-azimuthal stratified flow with a free surface, that---thanks to the inclusion of forcing terms and the consideration of the Earth's geometry via spherical coordinates---makes it suitable for describing the Antarctic Circumpolar Current and enables an in-depth analysis of the structure of this flow. In line with the latter aspect, we employ functional analytical techniques to prove that the free surface distortion is defined in a unique and implicit way by means of the pressure applied at the free surface. We conclude our discussion by setting out relations between the monotonicity of the surface pressure and the monotonicity of the surface distortion that concur with the physical expectations.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
A steady stratified purely azimuthal flow representing the Antarctic Circumpolar Current
Authors:
Calin Iulian Martin,
Ronald Quirchmayr
Abstract:
We construct an explicit steady stratified purely azimuthal flow for the governing equations of geophysical fluid dynamics. These equations are considered in a setting that applies to the Antarctic Circumpolar Current, accounting for eddy viscosity and forcing terms.
We construct an explicit steady stratified purely azimuthal flow for the governing equations of geophysical fluid dynamics. These equations are considered in a setting that applies to the Antarctic Circumpolar Current, accounting for eddy viscosity and forcing terms.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Enhancing surface production of negative ions using nitrogen doped diamond in a deuterium plasma
Authors:
Gregory J. Smith,
James Ellis,
Roba Moussaoui,
Cédric Pardanaud,
Céline Martin,
Jocelyn Achard,
Riadh Issaoui,
Timo Gans,
James P. Dedrick,
Gilles Cartry
Abstract:
The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering chall…
▽ More
The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering challenges these materials introduce. In this study we investigate the production of negative ions by do** diamond with nitrogen. Negatively biased ($-20$ V or $-130$ V), nitrogen doped micro-crystalline diamond films are introduced to a low pressure deuterium plasma (helicon source operated in capacitive mode, 2 Pa, 26 W) and negative ion energy distribution functions (NIEDFs) are measured via mass spectrometry with respect to the surface temperature (30$^{\circ}$C to 750$^{\circ}$C) and dopant concentration. The results suggest that nitrogen do** has little influence on the yield when the sample is biased at $-130$ V, but when a relatively small bias voltage of $-20$ V is applied the yield is increased by a factor of 2 above that of un-doped diamond when its temperature reaches 550$^{\circ}$C. The do** of diamond with nitrogen is a new method for controlling the surface production of negative ions, which continues to be of significant interest for a wide variety of practical applications.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Post-mortem analysis of tungsten plasma facing components in tokamaks: Raman microscopy measurements on compact, porous oxide and nitride films and nanoparticles
Authors:
Cédric Pardanaud,
David Dellasega,
Matteo Passoni,
Céline Martin,
Pascale Roubin,
Younès Addab,
Cécile Arnas,
Lénaïc Couëdel,
Marco Minissale,
Eric Salomon,
Gregory Giacometti,
Alexandre Merlen,
Elodie Bernard,
Rodrigo Mateus,
Eduardo Alves,
Zdravko Siketic,
Iva Bogdanović Radović,
Antti Hakola,
Eurofusion Pfc
Abstract:
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, p…
▽ More
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$μ$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Measurements of Single Event Upset in ATLAS IBL
Authors:
G. Balbi,
M. Barbero,
R. Beccherle,
M. Bindi,
P. Breugnon,
P. Butti,
D. Cinca,
J. Dickinson,
D. Ferrere,
D. Fougeron,
M. Garcia-Sciveres,
J. Garcia Pascual,
A. Gaudiello,
C. Gemme,
N. Giangiacomi,
T. Hemperek,
L. Jeanty,
O. Kepka,
M. Kocian,
K. Lantzsch,
P. Liu,
C. Martin,
A. Mekkaoui,
M. Menouni,
K. Potamianos
, et al. (3 additional authors not shown)
Abstract:
Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulati…
▽ More
Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulations indicate that SET dominate over SEU on the load line of the memory. Operational issues and mitigation techniques are presented.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Delta-doped Electron Multiplying CCDs for FIREBall-2
Authors:
Gillian Kyne,
Erika T. Hamden,
Shouleh Nikzad,
Keri Hoadley,
April Jewell,
Todd Jones,
Michael Hoenk,
Samuel Cheng,
D. Christopher Martin,
Nicole Lingner,
David Schiminovich,
Bruno Milliard,
Robert Grange,
Olivier Daigle
Abstract:
We present the status of on-going detector development efforts for our joint NASA/CNES balloon-borne UV multi-object spectrograph, the Faint Intergalactic Redshifted Emission Balloon (FIREBall-2; FB-2). FB-2 demonstrates a new UV detector technology, the delta-doped Electron Multiplying CCD (EMCCD), in a low risk suborbital environment, to prove the performance of EMCCDs for future space missions…
▽ More
We present the status of on-going detector development efforts for our joint NASA/CNES balloon-borne UV multi-object spectrograph, the Faint Intergalactic Redshifted Emission Balloon (FIREBall-2; FB-2). FB-2 demonstrates a new UV detector technology, the delta-doped Electron Multiplying CCD (EMCCD), in a low risk suborbital environment, to prove the performance of EMCCDs for future space missions and Technology Readiness Level (TRL) advancement. EMCCDs can be used in photon counting (PC) mode to achieve extremely low readout noise ($<$1 electron). Our testing has focused on reducing clock-induced-charge (CIC) through wave sha** and well depth optimization with a \nuvu V2 CCCP Controller, measuring CIC at 0.001 e$^{-}$/pixel/frame. This optimization also includes methods for reducing dark current, via cooling, and substrate voltage levels. We discuss the challenges of removing cosmic rays, which are also amplified by these detectors, as well as a data reduction pipeline designed for our noise measurement objectives. FB-2 flew in 2018, providing the first time an EMCCD was used for UV observations in the stratosphere. FB-2 is currently being built up to fly again in 2020, and improvements are being made to the EMCCD to continue optimizing its performance for better noise control.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
A simple approach to bulk bioinspired tough ceramics
Authors:
Hassan Saad,
Kaoutar Radi,
Thierry Douillard,
David Jauffres,
Christophe L. Martin,
Sylvain Meille,
Sylvain Deville
Abstract:
The development of damage-resistant structural materials that can withstand harsh environments is a major issue in materials science and engineering. Bioinspired brick-and-mortar designs have recently demonstrated a range of interesting mechanical properties in proof-of-concept studies. However, reproducibility and scalability issues associated with the actual processing routes have impeded furthe…
▽ More
The development of damage-resistant structural materials that can withstand harsh environments is a major issue in materials science and engineering. Bioinspired brick-and-mortar designs have recently demonstrated a range of interesting mechanical properties in proof-of-concept studies. However, reproducibility and scalability issues associated with the actual processing routes have impeded further developments and industrialization of such materials. Here we demonstrate a simple approach based on uniaxial pressing and field assisted sintering of commercially available raw materials to process bioinspired ceramic/ceramic composites of larger thickness than previous approaches, with a sample thickness up to 1 cm. The ceramic composite retains the strength typical of dense alumina ($430~\pm 30MPa$) while kee** the excellent damage resistance demonstrated previously at the millimeter scale with a crack initiation toughness of $6.6MPa.m^{1/2}$ and fracture toughness up to $17.6 MPa.m^{1/2}$. These results validate the potential of these all-ceramic composites, previously demonstrated at lab scale only, and could enable their optimization, scale-up, and industrialization.
△ Less
Submitted 27 February, 2020;
originally announced March 2020.
-
Predicting trends in the quality of state-of-the-art neural networks without access to training or testing data
Authors:
Charles H. Martin,
Tongsu,
Peng,
Michael W. Mahoney
Abstract:
In many applications, one works with neural network models trained by someone else. For such pretrained models, one may not have access to training data or test data. Moreover, one may not know details about the model, e.g., the specifics of the training data, the loss function, the hyperparameter values, etc. Given one or many pretrained models, it is a challenge to say anything about the expecte…
▽ More
In many applications, one works with neural network models trained by someone else. For such pretrained models, one may not have access to training data or test data. Moreover, one may not know details about the model, e.g., the specifics of the training data, the loss function, the hyperparameter values, etc. Given one or many pretrained models, it is a challenge to say anything about the expected performance or quality of the models. Here, we address this challenge by providing a detailed meta-analysis of hundreds of publicly-available pretrained models. We examine norm based capacity control metrics as well as power law based metrics from the recently-developed Theory of Heavy-Tailed Self Regularization. We find that norm based metrics correlate well with reported test accuracies for well-trained models, but that they often cannot distinguish well-trained versus poorly-trained models. We also find that power law based metrics can do much better -- quantitatively better at discriminating among series of well-trained models with a given architecture; and qualitatively better at discriminating well-trained versus poorly-trained models. These methods can be used to identify when a pretrained neural network has problems that cannot be detected simply by examining training/test accuracies.
△ Less
Submitted 2 June, 2021; v1 submitted 16 February, 2020;
originally announced February 2020.
-
SPS Beam Dump Facility -- Comprehensive Design Study
Authors:
C. Ahdida,
R. G. Alia,
G. Arduini,
A. Arnalich,
P. Avigni,
F. Bardou,
M. Battistin,
J. Bauche,
M. Brugger,
J. Busom,
M. Calviani,
M. Casolino,
N. Colonna,
L. Dougherty,
Y. Dutheil,
E. Fornasiere,
M. A. Fraser,
L. Gatignon,
J. Gall,
S. Gilardoni,
B. Goddard,
J-L. Grenard,
D. Grenier,
C. Hessler,
R. Jacobsson
, et al. (23 additional authors not shown)
Abstract:
The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector…
▽ More
The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector models, and flavour physics measurements. In the first instance, exploitation of the facility, in beam dump mode, is envisaged to be for the Search for Hidden Particle (SHiP) experiment.
Following the first evaluation of the BDF in 2014-2016, CERN management launched a Comprehensive Design Study over three years for the facility. The BDF study team has since executed an in-depth feasibility study of proton delivery to target, the target complex, and the underground experimental area, including prototy** of key sub-systems and evaluations of the radiological aspects and safety. A first iteration of detailed integration and civil engineering studies have been performed in order to produce a realistic schedule and cost. This document gives a detailed overview of the proposed facility together with the results of the studies, and draws up a possible road map for a three-year Technical Design Report phase, followed by a 5 to 6 year construction phase.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Radiation Damage Studies on Titanium Alloys as High Intensity Proton Accelerator Beam Window Materials
Authors:
Taku Ishida,
Eiichi Wakai,
Shunsuke Makimura,
Patrick G. Hurh,
Kavin Ammigan,
Andrew M. Casella,
Danny J. Edwards,
David J. Senor,
Christopher J. Densham,
Michael Fitton,
Joe Bennett,
Dohyun Kim,
Nikolaos Simos,
Marco Calviani,
Claudio Torregrosa Martin
Abstract:
A high-strength dual alpha+beta phase titanium alloy Ti-6Al-4V is utilized as a material for beam windows in several accelerator target facilities. However, relatively little is known about how material properties of this alloy are affected by high-intensity proton beam irradiation. With plans to upgrade neutrino facilities at J-PARC and Fermilab to over 1 MW beam power, the radiation damage in th…
▽ More
A high-strength dual alpha+beta phase titanium alloy Ti-6Al-4V is utilized as a material for beam windows in several accelerator target facilities. However, relatively little is known about how material properties of this alloy are affected by high-intensity proton beam irradiation. With plans to upgrade neutrino facilities at J-PARC and Fermilab to over 1 MW beam power, the radiation damage in the window material will reach a few displacements per atom (dpa) per year, significantly above the ~0.3 dpa level of existing data. The RaDIATE collaboration has conducted a high intensity proton beam irradiation of various target and window material specimens at BLIP facility, including a variety of titanium alloys. Post-Irradiation Examination of the specimens in the 1st capsule, irradiated at up to 0.25 dpa, is in progress. Tensile tests in a hot cell at PNNL exhibited a clear signature of radiation hardening and loss of ductility for Ti-6Al-4V, while Ti-3Al-2.5V, with less beta phase, exhibited less severe hardening. Microstructural investigations will follow to study the cause of the difference in tensile behavior between these alloys. High-cycle fatigue (HCF) performance is critical to the lifetime estimation of beam windows exposed to a periodic thermal stress from a pulsed proton beam. The 1st HCF data on irradiated titanium alloys are to be obtained by a conventional bend fatigue test at Fermilab and by an ultrasonic mesoscale fatigue test at Culham Laboratory. Specimens in the 2nd capsule, irradiated at up to ~1 dpa, cover typical titanium alloy grades, including possible radiation-resistant candidates. These systematic studies on the effects of radiation damage of titanium alloys are intended to enable us to predict realistic lifetimes of current beam windows made of Ti-6Al-4V and to extend the lifetime by choosing a more radiation and thermal shock tolerant alloy.
△ Less
Submitted 22 November, 2019;
originally announced November 2019.
-
On the time-evolution of resonant triads in rotational capillary-gravity water waves
Authors:
Rossen I. Ivanov,
Calin I. Martin
Abstract:
We investigate an effect of the resonant interaction in the case of one-directional propagation of capillary-gravity surface waves arising as the free surface of a rotational water flow. Specifically, we assume a constant vorticity in the body of the fluid which physically corresponds to an underlying current with a linear horizontal velocity profile. We consider the interaction of three distinct…
▽ More
We investigate an effect of the resonant interaction in the case of one-directional propagation of capillary-gravity surface waves arising as the free surface of a rotational water flow. Specifically, we assume a constant vorticity in the body of the fluid which physically corresponds to an underlying current with a linear horizontal velocity profile. We consider the interaction of three distinct modes and we obtain the dynamic equations for a resonant triad. Setting the constant vorticity equal to zero we recover the well known integrable three-wave system.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
Large depth-of-field tracking of colloidal spheres in holographic microscopy by modeling the objective lens
Authors:
Brian Leahy,
Ronald Alexander,
Caroline Martin,
Solomon Barkley,
Vinothan Manoharan
Abstract:
Holographic microscopy has developed into a powerful tool for 3D particle tracking, yielding nanometer-scale precision at high frame rates. However, current particle tracking algorithms ignore the effect of the microscope objective on the formation of the recorded hologram. As a result, particle tracking in holographic microscopy is currently limited to particles well above the microscope focus. H…
▽ More
Holographic microscopy has developed into a powerful tool for 3D particle tracking, yielding nanometer-scale precision at high frame rates. However, current particle tracking algorithms ignore the effect of the microscope objective on the formation of the recorded hologram. As a result, particle tracking in holographic microscopy is currently limited to particles well above the microscope focus. Here, we show that modeling the effect of an aberration-free lens allows tracking of particles above, near, and below the focal plane in holographic microscopy, doubling the depth of field. Finally, we use our model to determine the conditions under which ignoring the effect of the lens is justified, and in what conditions it leads to systematic errors.
△ Less
Submitted 31 October, 2019;
originally announced October 2019.
-
Single-crystal and polycrystalline diamond erosion studies in Pilot-PSI
Authors:
D. Kogut,
D. Aussems,
N. Ning,
K. Bystrov,
A. Gicquel,
J. Achard,
O. Brinza,
Y. Addab,
C. Martin,
C. Pardanaud,
S. Khrapak,
G. Cartry
Abstract:
Diamond is a promising candidate for enhancing the negative-ion surface production in the ion sources for neutral injection in fusion reactors; hence evaluation of its reactivity towards hydrogen plasma is of high importance. High quality PECVD single crystal and polycrystalline diamond samples were exposed in Pilot-PSI with the D + flux of (4-7)$\times$10 24 m-2 s-1 and the impact energy of 7-9 e…
▽ More
Diamond is a promising candidate for enhancing the negative-ion surface production in the ion sources for neutral injection in fusion reactors; hence evaluation of its reactivity towards hydrogen plasma is of high importance. High quality PECVD single crystal and polycrystalline diamond samples were exposed in Pilot-PSI with the D + flux of (4-7)$\times$10 24 m-2 s-1 and the impact energy of 7-9 eV per deuteron at different surface temperatures; under such conditions physical sputtering is negligible, however chemical sputtering is important. Net chemical sputtering yield $Y = 9.7\times 10^{-3}$ at/ion at 800$^\circ$C was precisely measured ex-situ using a protective platinum mask (5x10x2 $μ$m) deposited beforehand on a single crystal followed by the post-mortem analysis using Transmission Electron Microscopy (TEM). The structural properties of the exposed diamond surface were analyzed by Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS). Gross chemical sputtering yields were determined in-situ by means of optical emission spectroscopy of the molecular CH AX band for several surface temperatures. We observed a bell shape dependence of the erosion yield versus temperature between 400$^\circ$C and 1200$^\circ$C, with a maximum yield of ~1.5$\times$10-2 at/ion attained at 900$^\circ$C. The yields obtained for diamond are relatively high $(0.51.5)\times 10^{-2}$ at/ion, comparable with those of graphite. XPS analyses show amorphization of diamond surface within 1 nm depth, in good agreement with molecular dynamics (MD) simulation. MD was also applied to study the hydrogen impact energy threshold for erosion of [100] diamond surface at different temperatures.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Performance tests of boron-coated straw detectors with thermal and cold neutron beams
Authors:
Georg Ehlers,
Athanasios Athanasiades,
Liang Sun,
Christopher S. Martin,
Murari Regmi,
Jeffrey L. Lacy
Abstract:
Prototypes of newly developed boron-coated straw (BCS) detectors have been tested in the thermal and cold neutron energy ranges. Their neutron detection performance has been benchmarked against the industry standard (detector tubes filled with 3He gas). The tests show that the BCS straws perform near their theoretical limit regarding the detection efficiency, which is adequate for scientific instr…
▽ More
Prototypes of newly developed boron-coated straw (BCS) detectors have been tested in the thermal and cold neutron energy ranges. Their neutron detection performance has been benchmarked against the industry standard (detector tubes filled with 3He gas). The tests show that the BCS straws perform near their theoretical limit regarding the detection efficiency, which is adequate for scientific instruments in the cold neutron energy range. The BCS detectors perform on par with 3He tubes in terms of signal to noise and timing resolution, and superior regarding longitudinal spatial resolution.
△ Less
Submitted 5 August, 2019;
originally announced August 2019.
-
Development of a neutron imaging station at the n\_TOF facility of CERN and applications to beam intercepting devices
Authors:
Federica Mingrone,
Marco Calviani,
Claudio Torregrosa Martin,
Oliver Aberle,
Michael Bacak,
Enrico Chiaveri,
Elvis Fornasiere,
Antonio Perillo-Marcone,
Vasilis Vlachoudis
Abstract:
A neutron radiography testing station has been developed exploiting the neutron beam of CERN's n\_TOF Experimental Area 2, located at the shortest distance to the neutron producing-target. The characteristics of the n\_TOF neutron beam for the imaging setup are presented in this paper, together with the obtained experimental results. The possible developments of neutron imaging capabilities of the…
▽ More
A neutron radiography testing station has been developed exploiting the neutron beam of CERN's n\_TOF Experimental Area 2, located at the shortest distance to the neutron producing-target. The characteristics of the n\_TOF neutron beam for the imaging setup are presented in this paper, together with the obtained experimental results. The possible developments of neutron imaging capabilities of the n\_TOF facility in terms of detection-systems and beam-line upgrades are as well outlined.
△ Less
Submitted 30 April, 2019;
originally announced May 2019.
-
Biotransformation and biological impact of graphene and graphene oxide during simulated oral ingestion
Authors:
Daniela Guarnieri,
Paola Sanchez-Moreno,
Antonio Esau Del Rio Castillo,
Francesco Bonaccorso,
Francesca Gatto,
Giuseppe Bardi,
Cristina Martin,
Ester Vazquez,
Tiziano Catelani,
Stefania Sabella,
Pier Paolo Pompa
Abstract:
Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene ox…
▽ More
Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene oxide (GOX), following ingestion as exposure route. To mimic FLG and GOX ingestion, an in vitro digestion assay based on a standardized operating procedure (SOP) is applied. The assay simulates the human ingestion of GRMs during their dynamic passage through the different environments of gastrointestinal (GI) tract (salivary, gastric, intestinal). Physical-chemical changes of GRMs during the digestion process are assessed through a detailed Raman spectroscopy characterization. Moreover, the effect of chronic exposure to digested GRMs on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. Our results showed that the FLG and GOX nanoflakes aggregates after experiencing the passage through the different environments of GI tract, with evident do** effects, due to the interaction of GRMs with digestive juice components and the strong pH variations. Interestingly, neither structural changes nor degradation of the nanomaterials is observed, suggesting that GRMs are bio-persistent nanomaterials when administered by oral route. Chronic exposure to digested GRMs does not affect intestinal barrier integrity and is not associated to inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out, due to the observed bio-durability of the materials.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Surface waves over currents and uneven bottom
Authors:
Alan C. Compelli,
Rossen I. Ivanov,
Calin I. Martin,
Michail D. Todorov
Abstract:
The propagation of surface water waves interacting with a current and an uneven bottom is studied. Such a situation is typical for ocean waves where the winds generate currents in the top layer of the ocean. The role of the bottom topography is taken into account since it also influences the local wave and current patterns. Specific scaling of the variables is selected which leads to approximation…
▽ More
The propagation of surface water waves interacting with a current and an uneven bottom is studied. Such a situation is typical for ocean waves where the winds generate currents in the top layer of the ocean. The role of the bottom topography is taken into account since it also influences the local wave and current patterns. Specific scaling of the variables is selected which leads to approximations of Boussinesq and KdV types. The arising KdV equation with variable coefficients, dependent on the bottom topography, is studied numerically when the initial condition is in the form of the one soliton solution for the initial depth. Emergence of new solitons is observed as a result of the wave interaction with the uneven bottom.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Scaled Prototype of a Tantalum Target Embedded in Expanded Graphite for Antiproton Production: Design, Manufacturing and Testing under Proton Beam Impacts
Authors:
Claudio Torregrosa Martin,
Marco Calviani,
Antonio Perillo-Marcone,
Romain Ferriere,
Nicola Solieri,
Mark Butcher,
Lucian-Mircea Grec,
Joao Canhoto Espadanal
Abstract:
This study presents a further step within the ongoing R&D activities for the redesign of the CERN's Antiproton Decelerator Production Target (AD-Target). A first scaled target prototype, constituted of a sliced core made of ten Ta rods -8 mm diameter, 16 mm length- embedded in a compressed expanded graphite (EG) matrix, inserted in a 44 mm diameter Ti-6Al-4V container, has been built and tested un…
▽ More
This study presents a further step within the ongoing R&D activities for the redesign of the CERN's Antiproton Decelerator Production Target (AD-Target). A first scaled target prototype, constituted of a sliced core made of ten Ta rods -8 mm diameter, 16 mm length- embedded in a compressed expanded graphite (EG) matrix, inserted in a 44 mm diameter Ti-6Al-4V container, has been built and tested under proton beam impacts at the CERN's HiRadMat facility, in the so called HRMT-42 experiment. This prototype has been designed following the lessons learned from previous numerical and experimental works (HRMT-27 experiment) aiming at answering the open questions left in these studies. Velocity data recorded on-line at the target periphery during the HRMT-42 experiment is presented, showing features of its dynamic response to proton beam impacts. Furthermore, x-ray and neutron tomographies of the target prototype after irradiation have been performed. These non-destructive techniques show the extensive plastic deformation of the Ta core, but suggest that the EG matrix can adapt to such deformation, which is a positive result. The neutron tomography successfully revealed the internal state of the tantalum core, showing the appearance of voids of several hundreds of micrometers, in particular in the downstream rods of the core. The possible origin of such voids is discussed while future microstructure analysis after the target opening will try to clarify their nature.
△ Less
Submitted 13 August, 2018; v1 submitted 26 March, 2018;
originally announced March 2018.
-
Searching for Exoplanets Using a Microresonator Astrocomb
Authors:
Myoung-Gyun Suh,
Xu Yi,
Yu-Hung Lai,
S. Leifer,
Ivan S. Grudinin,
G. Vasisht,
Emily C. Martin,
Michael P. Fitzgerald,
G. Doppmann,
J. Wang,
D. Mawet,
Scott B. Papp,
Scott A. Diddams,
C. Beichman,
Kerry Vahala
Abstract:
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous applic…
▽ More
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous application outside the lab and even in future space-borne instruments. Moreover, microcomb spectra are ideally suited for astronomical spectrograph calibration and eliminate filtering steps required by conventional mode-locked-laser frequency combs. Here, for the calibration of astronomical spectrographs, we demonstrate an atomic/molecular line-referenced, near-infrared soliton microcomb. Efforts to search for the known exoplanet HD 187123b were conducted at the Keck-II telescope as a first in-the-field demonstration of microcombs.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
The impact of partially missing communities~on the reliability of centrality measures
Authors:
Christoph Martin
Abstract:
Network data is usually not error-free, and the absence of some nodes is a very common type of measurement error. Studies have shown that the reliability of centrality measures is severely affected by missing nodes. This paper investigates the reliability of centrality measures when missing nodes are likely to belong to the same community. We study the behavior of five commonly used centrality mea…
▽ More
Network data is usually not error-free, and the absence of some nodes is a very common type of measurement error. Studies have shown that the reliability of centrality measures is severely affected by missing nodes. This paper investigates the reliability of centrality measures when missing nodes are likely to belong to the same community. We study the behavior of five commonly used centrality measures in uniform and scale-free networks in various error scenarios. We find that centrality measures are generally more reliable when missing nodes are likely to belong to the same community than in cases in which nodes are missing uniformly at random. In scale-free networks, the betweenness centrality becomes, however, less reliable when missing nodes are more likely to belong to the same community. Moreover, centrality measures in scale-free networks are more reliable in networks with stronger community structure. In contrast, we do not observe this effect for uniform networks. Our observations suggest that the impact of missing nodes on the reliability of centrality measures might not be as severe as the literature suggests.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Map** The Ultrafast Flow Of Harvested Solar Energy In Living Photosynthetic Cells
Authors:
Peter D. Dahlberg,
Po-Chieh Ting,
Sara C. Massey,
Marco A. Allodi,
Elizabeth C. Martin,
C. Neil Hunter,
Gregory S. Engel
Abstract:
Photosynthesis transfers energy efficiently through a series of antenna complexes to the reaction center where charge separation occurs. Energy transfer in vivo is primarily monitored by measuring fluorescence signals from the small fraction of excitations that fail to result in charge separation. Here, we use two-dimensional electronic spectroscopy to follow the entire energy transfer process in…
▽ More
Photosynthesis transfers energy efficiently through a series of antenna complexes to the reaction center where charge separation occurs. Energy transfer in vivo is primarily monitored by measuring fluorescence signals from the small fraction of excitations that fail to result in charge separation. Here, we use two-dimensional electronic spectroscopy to follow the entire energy transfer process in a thriving culture of the purple bacteria, Rhodobacter sphaeroides. By removing contributions from scattered light, we extract the dynamics of energy transfer through the dense network of antenna complexes and into the reaction center. Simulations demonstrate that these dynamics constrain the membrane organization to be small pools of core antenna complexes that rapidly trap energy absorbed by surrounding peripheral antenna complexes. The rapid trap** and limited back transfer of these excitations lead to transfer efficiencies of 83% and a small functional light-harvesting unit.
△ Less
Submitted 24 June, 2017;
originally announced June 2017.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Universal geometric constraints during epithelial jamming
Authors:
Lior Atia,
Dapeng Bi,
Yasha Sharma,
Jennifer A. Mitchel,
Bomi Gweon,
Stephan Koehler,
Stephen J. DeCamp,
Bo Lan,
Rebecca Hirsch,
Adrian F. Pegoraro,
Kyu Ha Lee,
Jacqueline Starr,
David A. Weitz,
Adam C. Martin,
**-Ah Park,
James P. Butler,
Jeffrey J. Fredberg
Abstract:
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually const…
▽ More
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually constrained through a relationship that is purely geometrical. That relationship is shown to govern maturation of the pseudostratified bronchial epithelial layer cultured from both non-asthmatic and asthmatic donors as well as formation of the ventral furrow in the epithelial monolayer of the Drosophila embryo in vivo. Across these and other vastly different epithelial systems, cell shape variation collapses to a family of distributions that is common to all and potentially universal. That distribution, in turn, is accounted for quantitatively by a mechanistic theory of cell-cell interaction showing that cell shape becomes progressively less elongated and less variable as the layer becomes progressively more jammed. These findings thus uncover a connection between jamming and geometry that is generic -spanning jammed living and inert systems alike- and demonstrate that proximity of the cell layer to the jammed state is the principal determinant of the most primitive features of epithelial cell shape and shape variation.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Estimating the sensitivity of centrality measures w.r.t. measurement errors
Authors:
Christoph Martin,
Peter Niemeyer
Abstract:
Most network studies rely on an observed network that differs from the underlying network which is obfuscated by measurement errors. It is well known that such errors can have a severe impact on the reliability of network metrics, especially on centrality measures: a more central node in the observed network might be less central in the underlying network.
We introduce a metric for the reliabili…
▽ More
Most network studies rely on an observed network that differs from the underlying network which is obfuscated by measurement errors. It is well known that such errors can have a severe impact on the reliability of network metrics, especially on centrality measures: a more central node in the observed network might be less central in the underlying network.
We introduce a metric for the reliability of centrality measures -- called sensitivity. Given two randomly chosen nodes, the sensitivity means the probability that the more central node in the observed network is also more central in the underlying network. The sensitivity concept relies on the underlying network which is usually not accessible. Therefore, we propose two methods to approximate the sensitivity. The iterative method, which simulates possible underlying networks for the estimation and the imputation method, which uses the sensitivity of the observed network for the estimation. Both methods rely on the observed network and assumptions about the underlying type of measurement error (e.g., the percentage of missing edges or nodes).
Our experiments on real-world networks and random graphs show that the iterative method performs well in many cases. In contrast, the imputation method does not yield useful estimations for networks other than Erdős-Rényi graphs.
△ Less
Submitted 20 September, 2017; v1 submitted 4 April, 2017;
originally announced April 2017.