-
Visual and quantitative analysis of the trap** volume in dielectrophoresis of nanoparticles
Authors:
Siarhei Zavatski,
Olivier J. F. Martin
Abstract:
Nanoparticle manipulations require a careful analysis of the forces at play. Unfortunately, traditional force measurement techniques based on the particle velocity do not provide a sufficient resolution, while balancing approaches involving counteracting forces are often cumbersome. Here, we demonstrate that a nanoparticle dielectrophoretic response can be quantitatively studied by a straightforwa…
▽ More
Nanoparticle manipulations require a careful analysis of the forces at play. Unfortunately, traditional force measurement techniques based on the particle velocity do not provide a sufficient resolution, while balancing approaches involving counteracting forces are often cumbersome. Here, we demonstrate that a nanoparticle dielectrophoretic response can be quantitatively studied by a straightforward visual delineation of the dielectrophoretic trap** volume. We reveal this volume by detecting the width of the region depleted of gold nanoparticles by the dielectrophoretic force. Comparison of the measured widths for various nanoparticle sizes with numerical simulations obtained by solving the particle-conservation equation shows excellent agreement, thus providing access to the particles physical properties, such as polarizability and size. These findings can be further extended to investigate various types of nano-objects $-$ including bio- and molecular aggregates $-$ and offer a robust characterization tool that can enhance the control of matter at the nanoscale.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
A magnetically silent optically pumped magnetometer for a neutron electric dipole moment experiment
Authors:
Wolfgang Klassen,
Shomi Ahmed,
Kiera Pond Grehan,
Chris Hovde,
Kirk W. Madison,
Russel R. Mammei,
Jeffery W. Martin,
Mark McCrea,
Tahereh Mohammadi,
Takamasa Momose,
Patrick Opsahl,
David C. M. Ostapchuk
Abstract:
We report the performance of a magnetically silent optically pumped cesium magnetometer with a statistical sensitivity of 3.9 pT and a stability of 90 fT over 150 seconds of measurement. Optical pum** with coherent, linearly-polarized, resonant light leads to a relatively long-lived polarized ground state of the cesium vapour contained in a measurement cell. The state precesses at its Larmor fre…
▽ More
We report the performance of a magnetically silent optically pumped cesium magnetometer with a statistical sensitivity of 3.9 pT and a stability of 90 fT over 150 seconds of measurement. Optical pum** with coherent, linearly-polarized, resonant light leads to a relatively long-lived polarized ground state of the cesium vapour contained in a measurement cell. The state precesses at its Larmor frequency in the magnetic field to be measured. Nonlinear magneto-optical rotation then leads to the rotation of the plane of polarization of a linearly polarized probe laser beam. The rotation angle is modulated at twice the Larmor frequency. A measurement of this frequency constitutes an absolute measurement of the magnetic field magnitude. Featuring purely optical operation, non-magnetic construction, low noise floor, and high stability, this sensor will be used for the upcoming TUCAN electric dipole moment experiment and other highly sensitive magnetic applications.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Exploring the Influence of (n-1)d Subvalence Correlation and of Spin-Orbit Coupling on Chalcogen Bonding
Authors:
Nisha Mehta,
Jan M. L. Martin
Abstract:
This article presents a comprehensive computational investigation into chalcogen bonding interactions, focusing specifically on elucidating the role of subvalence (n$-$1)d and (n$-$1)sp correlation. The incorporation of inner-shell (n$-$1)d correlation leads to a decrease in interaction energies for chalcogen-bonded systems (at least those studied herein), contradicting the observations regarding…
▽ More
This article presents a comprehensive computational investigation into chalcogen bonding interactions, focusing specifically on elucidating the role of subvalence (n$-$1)d and (n$-$1)sp correlation. The incorporation of inner-shell (n$-$1)d correlation leads to a decrease in interaction energies for chalcogen-bonded systems (at least those studied herein), contradicting the observations regarding halogen bonding documented by Kesharwani et al. in \textit{J. Phys. Chem. A}, \textbf{2018}, 122 (8), 2184-2197. The significance of (n$-$1)sp subvalence correlation appears to be lower by an order of magnitude. Notably, among the various components of interaction energies computed at the PNO-LCCSD(T) or DF-CCSD levels, we identify the PNO-LMP2 or DF-MP2 component of the (n$-$1)d correlation as predominant. Furthermore, we delve into the impact of second-order spin-orbit coupling (SOC2) on these interactions. Specifically, for the Te complexes, SOC2 effects rival (n$-$1)d correlation in importance; for the Se complexes, SOC2 is much less important. Generally, SOC2 stabilizes monomers more than dimers, resulting in reduced binding of the latter. Notably, at equilibrium and stretched geometries, SOC2 and (n$-$1)d destabilize the complex; however, at compressed geometries, they exhibit opposing effects, with (n$-$1)d becoming stabilizing.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Basis set extrapolation from the vanishing counterpoise correction condition
Authors:
Vladimir Fishman,
Emmanouil Semidalas,
Jan M. L. Martin
Abstract:
Basis set extrapolations are typically rationalized either from analytical arguments involving the partial-wave or principal expansions of the correlation energy in helium-like systems, or from fitting extrapolation parameters to reference energetics for a small(ish) training set. Seeking to avoid both, we explore a third alternative: extracting extrapolation parameters from the requirement that t…
▽ More
Basis set extrapolations are typically rationalized either from analytical arguments involving the partial-wave or principal expansions of the correlation energy in helium-like systems, or from fitting extrapolation parameters to reference energetics for a small(ish) training set. Seeking to avoid both, we explore a third alternative: extracting extrapolation parameters from the requirement that the BSSE (basis set superposition error) should vanish at the complete basis set limit. We find this to be a viable approach provided that the underlying basis sets are not too small and reasonably well balanced. For basis sets not augmented by diffuse functions, BSSE minimization and energy fitting yield quite similar parameters.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Design and Simulation of TiN-Based Suspended Meander Kinetic Inductance Detectors (KIDs) for Visible and Near-Infrared Astronomy Applications
Authors:
Maria Appavou,
Lucas Ribeiro,
Paul Nicaise,
Jie Hu,
Jean-Marc Martin,
Josiane Firminy,
Christine Chaumont,
Piercarlo Bonifacio,
Faouzi Boussaha
Abstract:
We report on simulations of a novel design of optical titanium nitride (TiN)- based Kinetic Inductance Detectors (KIDs) in order to improve their response to optical photons. We propose to separate the meander from the substrate to trap hot phonons generated by optical photons, preventing their rapid propagation through the substrate. These phonons would in turn contribute to the breaking of more…
▽ More
We report on simulations of a novel design of optical titanium nitride (TiN)- based Kinetic Inductance Detectors (KIDs) in order to improve their response to optical photons. We propose to separate the meander from the substrate to trap hot phonons generated by optical photons, preventing their rapid propagation through the substrate. These phonons would in turn contribute to the breaking of more Cooper pairs, thereby increasing the response of the detector. In our design, the meander is suspended a few hundred nanometers above the substrate. Furthermore, reflective gold (Au) or aluminum (Al)-based layers can be placed under the meander to improve photon coupling in the optical wavelengths.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
Stimulated Secondary Emission of Single Photon Avalanche Diodes
Authors:
Kurtis Raymond,
Fabrice Retière,
Harry Lewis,
Andrea Capra,
Duncan McCarthy,
Austin de St Croix,
Giacomo Gallina,
Joe McLaughlin,
Juliette Martin,
Nicolas Massacret,
Paolo Agnes,
Ryan Underwood,
Seraphim Koulosousas,
Peter Margetak
Abstract:
Large-area next-generation physics experiments rely on using Silicon Photo-Multiplier (SiPM) devices to detect single photons, which trigger charge avalanches. The noise mechanism of external cross-talk occurs when secondary photons produced during a charge avalanche escape from an SiPM and trigger other devices within a detector system. This work presents measured spectra of the secondary photons…
▽ More
Large-area next-generation physics experiments rely on using Silicon Photo-Multiplier (SiPM) devices to detect single photons, which trigger charge avalanches. The noise mechanism of external cross-talk occurs when secondary photons produced during a charge avalanche escape from an SiPM and trigger other devices within a detector system. This work presents measured spectra of the secondary photons emitted from the Hamamatsu VUV4 and Fondazione Bruno Kessler VUV-HD3 SiPMs stimulated by laser light, near operational voltages. The work describes the Microscope for the Injection and Emission of Light (MIEL) setup, which is an experimental apparatus constructed for this purpose. Measurements have been performed at a range of over-voltage values and temperatures from 86~K to 293~K. The number of photons produced per avalanche at the source are calculated from the measured spectra and determined to be 40$\pm$9 and 61$\pm$11 photons produced per avalanche for the VUV4 and VUV-HD3 respectively at 4 volts over-voltage. No significant temperature dependence is observed within the measurement uncertainties. The overall number of photons emitted per avalanche from each SiPM device are also reported.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
High-order harmonic generation in 2D Transition Metal Disulphides
Authors:
Jose Manuel Iglesias,
Elena Pascual,
Maria J. Martin,
Raul Rengel
Abstract:
In this paper we explore the capabilities of MoS2 and WS2 2D monolayers to produce radiation in the terahertz range by generation of high-order harmonics. This phenomenon, which is a result of the non-linear response of the electronic carrier population to the applied electric field, is studied by using a particle ensemble stochastic simulation approach based on the Monte Carlo method. The power o…
▽ More
In this paper we explore the capabilities of MoS2 and WS2 2D monolayers to produce radiation in the terahertz range by generation of high-order harmonics. This phenomenon, which is a result of the non-linear response of the electronic carrier population to the applied electric field, is studied by using a particle ensemble stochastic simulation approach based on the Monte Carlo method. The power of the produced harmonic signals is studied against the electric field amplitude, the external temperature, and the frequency of the excitation. Additionally, the stochastic nature of the simulation tool enables to discern the purely discrete harmonic signal from the background spectral noise that comes from the intrinsic carrier velocity fluctuations in the diffusive regime, permitting to set bandwidth thresholds for harmonic extraction. It was found that both TMDs showed similar thresholds bandwidths when compared to III-V semiconductor at low temperatures, while WS2 would be by far a better choice, over MoS2, for exploitation of the 7th and 9th harmonic generation.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Carrier Mobility and High-Field Velocity in 2D Transition Metal Dichalcogenides: Degeneracy and Screening
Authors:
Jose Manuel Iglesias,
Alejandra Nardone,
Raul Rengel,
Karol Kalna,
Maria J. Martin,
Elena Pascual
Abstract:
The effect of degeneracy and the impact of free-carrier screening on a low-field mobility and a high-field drift velocity in MoS2 and WS2 are explored using an in-house ensemble Monte Carlo simulator. Electron low field mobility increases to 8400 cm2/Vs for MoS2 and to 12040 cm2/Vs for WS2 when temperature decreases to 77 K and carrier concentration is around 5e12 cm-2. In the case of holes, best…
▽ More
The effect of degeneracy and the impact of free-carrier screening on a low-field mobility and a high-field drift velocity in MoS2 and WS2 are explored using an in-house ensemble Monte Carlo simulator. Electron low field mobility increases to 8400 cm2/Vs for MoS2 and to 12040 cm2/Vs for WS2 when temperature decreases to 77 K and carrier concentration is around 5e12 cm-2. In the case of holes, best mobility values were 9320 cm2/Vs and 13290 cm2 per Vs, reached at 77 K, while at room temperature these fall to 80 cm2/Vs and 150 cm2/Vs for MoS2 and WS2, respectively. The carrier screening effect plays a major role at low fields, and low and intermediate temperatures, where a combination of large occupancy of primary valleys and carrier-phonon interactions dominated by relatively low energy exchange processes results in an enhanced screening of intrinsic scattering. For electrons, degeneracy yields to transport in secondary valleys, which plays an important role in the decrease of the low field mobility at high concentrations and/or at room temperature. The high-field drift velocity is not much affected by carrier screening because of an increased carrier scattering with surface optical polar phonons, favouring larger phonon wavevector interactions with small dielectric function values.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Hierarchical phased-array antennas coupled to Al KIDs: a scalable architecture for multi-band mm/submm focal planes
Authors:
Jean-Marc Martin,
Junhan Kim,
Fabien Defrance,
Shibo Shu,
Andrew D. Beyer,
Peter K. Day,
Jack Sayers,
Sunil R. Golwala
Abstract:
We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz a…
▽ More
We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz and 365 GHz) with on-chip lumped-element band-pass filters, and routed to different KIDs using microstriplines. Individual pixels detect light for the 3 higher frequency bands (190-365 GHz) and the signals from four individual pixels are coherently summed to create a larger pixel detecting light for the lowest-frequency band (125-175 GHz). The spectral response of the band-pass filters was measured using Fourier transform spectroscopy (FTS), the far-field beam pattern of the phased-array antennas was obtained using an infrared source mounted on a 2-axis translating stage, and the optical efficiency of the KIDs was characterized by observing loads at 294 K and 77 K. We report on the results of these three measurements.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
A Simple Model of Energy Threshold for Snowball Chambers
Authors:
M. Szydagis,
C. Levy,
A. E. Bolotnikov,
M. V. Diwan,
G. J. Homenides,
A. C. Kamaha,
J. Martin,
R. Rosero,
M. Yeh
Abstract:
Cloud and bubble chambers have historically been used for particle detection, capitalizing on supersaturation and superheating, respectively. Here we present new results from a prototype snowball chamber, in which an incoming particle triggers crystallization of a purified, supercooled liquid. We demonstrate, for the first time, simulation agreement with our first results from 5 years ago: the hig…
▽ More
Cloud and bubble chambers have historically been used for particle detection, capitalizing on supersaturation and superheating, respectively. Here we present new results from a prototype snowball chamber, in which an incoming particle triggers crystallization of a purified, supercooled liquid. We demonstrate, for the first time, simulation agreement with our first results from 5 years ago: the higher temperature of the freezing of water and significantly shorter time spent supercooled with respect to control in the presence of a Cf-252 fission neutron source. This is accomplished by combining Geant4 modeling of neutron interactions with the Seitz nucleation model used in superheated bubble chambers, including those seeking dark matter. We explore the possible implications of using this new technology for GeV-scale WIMP searches, especially in terms of spin-dependent proton coupling, and report the first supercooling of WbLS (water-based liquid scintillator).
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
The Physics-Informed Neural Network Gravity Model: Generation III
Authors:
John Martin,
Hanspeter Schaub
Abstract:
Scientific machine learning and the advent of the Physics-Informed Neural Network (PINN) show considerable potential in their capacity to identify solutions to complex differential equations. Over the past two years, much work has gone into the development of PINNs capable of solving the gravity field modeling problem -- i.e.\ learning a differentiable form of the gravitational potential from posi…
▽ More
Scientific machine learning and the advent of the Physics-Informed Neural Network (PINN) show considerable potential in their capacity to identify solutions to complex differential equations. Over the past two years, much work has gone into the development of PINNs capable of solving the gravity field modeling problem -- i.e.\ learning a differentiable form of the gravitational potential from position and acceleration estimates. While the past PINN gravity models (PINN-GMs) have demonstrated advantages in model compactness, robustness to noise, and sample efficiency; there remain key modeling challenges which this paper aims to address. Specifically, this paper introduces the third generation of the Physics-Informed Neural Network Gravity Model (PINN-GM-III) which solves the problems of extrapolation error, bias towards low-altitude samples, numerical instability at high-altitudes, and compliant boundary conditions through numerous modifications to the model's design. The PINN-GM-III is tested by modeling a known heterogeneous density asteroid, and its performance is evaluated using seven core metrics which showcases its strengths against its predecessors and other analytic and numerical gravity models.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
W4$Λ$: leveraging $Λ$ coupled cluster for accurate computational thermochemistry approaches
Authors:
Emmanouil Semidalas,
Amir Karton,
Jan M. L. Martin
Abstract:
High-accuracy composite wavefunction methods like Weizmann-4 (W4) theory, high-accuracy extrapolated \textit{ab initio} thermochemistry (HEAT), and Feller-Peterson-Dixon (FPD) enable sub-kJ/mol accuracy in gas-phase thermochemical properties. Their biggest computational bottleneck is the evaluation of the valence post-CCSD(T) correction term. We demonstrate here, for the W4-17 thermochemistry benc…
▽ More
High-accuracy composite wavefunction methods like Weizmann-4 (W4) theory, high-accuracy extrapolated \textit{ab initio} thermochemistry (HEAT), and Feller-Peterson-Dixon (FPD) enable sub-kJ/mol accuracy in gas-phase thermochemical properties. Their biggest computational bottleneck is the evaluation of the valence post-CCSD(T) correction term. We demonstrate here, for the W4-17 thermochemistry benchmark and subsets thereof, that the lambda coupled cluster expansion converges more rapidly and smoothly than the regular coupled cluster series. By means of CCSDT(Q)$_Λ$ and CCSDTQ(5)$_Λ$, we can considerably (up to an order of magnitude) accelerate W4- and W4.3-type calculations without loss in accuracy, leading to the W4$Λ$ and W4.3$Λ$ computational thermochemistry protocols.
△ Less
Submitted 11 April, 2024; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Purcell-Enhanced Single Photons at Telecom Wavelengths from a Quantum Dot in a Photonic Crystal Cavity
Authors:
Catherine L. Phillips,
Alistair J. Brash,
Max Godsland,
Nicholas J. Martin,
Andrew Foster,
Anna Tomlinson,
Rene Dost,
Nasser Babazadeh,
Elisa M. Sala,
Luke Wilson,
Jon Heffernan,
Maurice S. Skolnick,
A. Mark Fox
Abstract:
Quantum dots are promising candidates for telecom single photon sources due to their tunable emission across the different low-loss telecommunications bands, making them compatible with existing fiber networks. Their suitability for integration into photonic structures allows for enhanced brightness through the Purcell effect, supporting efficient quantum communication technologies. Our work focus…
▽ More
Quantum dots are promising candidates for telecom single photon sources due to their tunable emission across the different low-loss telecommunications bands, making them compatible with existing fiber networks. Their suitability for integration into photonic structures allows for enhanced brightness through the Purcell effect, supporting efficient quantum communication technologies. Our work focuses on InAs/InP QDs created via droplet epitaxy MOVPE to operate within the telecoms C-band. We observe a short radiative lifetime of 340 ps, arising from a Purcell factor of 5, owing to interaction of the QD within a low-mode-volume photonic crystal cavity. Through in-situ control of the sample temperature, we show both temperature tuning of the QD's emission wavelength and a preserved single photon emission purity at temperatures up to 25K. These findings suggest the viability of QD-based, cryogen-free, C-band single photon sources, supporting applicability in quantum communication technologies.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Simulation Study of Photon-to-Digital Converter (PDC) Timing Specifications for LoLX Experiment
Authors:
Nguyen V. H. Viet,
Alaa Al Masri,
Masaharu Nomachi,
Marc-Andre Tétrault,
Soud Al Kharusi,
Thomas Brunner,
Christopher Chambers,
Bindiya Chana,
Austin de St. Croix,
Eamon Egan,
Marco Francesconi,
David Gallacher,
Luca Galli,
Pietro Giampa,
Damian Goeldi,
Jessee Lefebvre,
Chloe Malbrunot,
Peter Margetak,
Juliette Martin,
Thomas McElroy,
Mayur Patel,
Bernadette Rebeiro,
Fabrice Retiere,
El Mehdi Rtimi,
Lisa Rudolph
, et al. (2 additional authors not shown)
Abstract:
The Light only Liquid Xenon (LoLX) experiment is a prototype detector aimed to study liquid xenon (LXe) light properties and various photodetection technologies. LoLX is also aimed to quantify LXe's time resolution as a potential scintillator for 10~ps time-of-flight (TOF) PET. Another key goal of LoLX is to perform a time-based separation of Cerenkov and scintillation photons for new background r…
▽ More
The Light only Liquid Xenon (LoLX) experiment is a prototype detector aimed to study liquid xenon (LXe) light properties and various photodetection technologies. LoLX is also aimed to quantify LXe's time resolution as a potential scintillator for 10~ps time-of-flight (TOF) PET. Another key goal of LoLX is to perform a time-based separation of Cerenkov and scintillation photons for new background rejection methods in LXe experiments. To achieve this separation, LoLX is set to be equipped with photon-to-digital converters (PDCs), a photosensor type that provides a timestamp for each observed photon. To guide the PDC design, we explore requirements for time-based Cerenkov separation. We use a PDC simulator, whose input is the light information from the Geant4-based LoLX simulation model, and evaluate the separation quality against time-to-digital converter (TDC) parameters. Simulation results with TDC parameters offer possible configurations supporting a good separation. Compared with the current filter-based approach, simulations show Cerenkov separation level increases from 54% to 71% when using PDC and time-based separation. With the current photon time profile of LoLX simulation, the results also show 71% separation is achievable with just 4 TDCs per PDC. These simulation results will lead to a specification guide for the PDC as well as expected results to compare against future PDC-based experimental measurements. In the longer term, the overall LoLX results will assist large LXe-based experiments and motivate the assembly of a LXe-based TOF-PET demonstrator system.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
Denoising total scattering data using Compressed Sensing
Authors:
James Weng,
Niklas B. Thompson,
Christopher Folmar,
James D. Martin,
Christina Hoffman
Abstract:
To obtain the best resolution for any measurement there is an ever-present challenge to achieve maximal differentiation between signal and noise over as fine of sampling dimensions as possible. In diffraction science these issues are particularly pervasive when analyzing small crystals, systems with diffuse scattering, or other systems in which the signal of interest is extremely weak and incident…
▽ More
To obtain the best resolution for any measurement there is an ever-present challenge to achieve maximal differentiation between signal and noise over as fine of sampling dimensions as possible. In diffraction science these issues are particularly pervasive when analyzing small crystals, systems with diffuse scattering, or other systems in which the signal of interest is extremely weak and incident flux and instrument time is limited. We here demonstrate that the tool of compressed sensing, which has successfully been applied to photography, facial recognition, and medical imaging, can be effectively applied to diffraction images to dramatically improve the signal-to-noise ratio (SNR) in a data-driven fashion without the need for additional measurements or modification of existing hardware. We outline a technique that leverages compressive sensing to bootstrap a single diffraction measurement into an effectively arbitrary number of virtual measurements, thereby providing a means of super-resolution imaging.
△ Less
Submitted 19 October, 2023; v1 submitted 18 October, 2023;
originally announced October 2023.
-
On the sensitivity of computed partial charges toward basis set and (exchange-)correlation treatment
Authors:
Nisha Mehta,
Jan M. L. Martin
Abstract:
Partial charges are a central concept in general chemistry and chemical biology, yet dozens of different computational definitions exist. In prior work [M. Cho et al., \textit{ChemPhysChem} {\bf 21}, 688-696 (2020)], we showed that these can be reduced to at most three `principal components of ionicity'. The present study addressed the dependance on computed partial charges $q$ on 1-particle basis…
▽ More
Partial charges are a central concept in general chemistry and chemical biology, yet dozens of different computational definitions exist. In prior work [M. Cho et al., \textit{ChemPhysChem} {\bf 21}, 688-696 (2020)], we showed that these can be reduced to at most three `principal components of ionicity'. The present study addressed the dependance on computed partial charges $q$ on 1-particle basis set and (for WFT methods) $n$-particle correlation treatment or (for DFT methods) exchange-correlation functional, for several representative partial charge definitions such as QTAIM, Hirshfeld, Hirshfeld-I, HLY (electrostatic), NPA, and APT. Our findings show that semi-empirical double hybrids can closely approach the CCSD(T) `gold standard' for this property. In fact, owing to an error compensation in MP2, CCSD partial charges are further away from CCSD(T) than is MP2. The non-local correlation is important, especially when there is a substantial amount of non-local exchange. Employing range separation provides no clear advantage, while global hybrids with 20-30\% Hartree-Fock exchange exhibit the best performance across all charge types. Basis set convergence analysis shows that an augmented triple-zeta haVTZ+d basis set is sufficient for Hirshfeld, Hirshfeld-I, HLY, and APT methods. In contrast, QTAIM and NPA display slower basis set convergence. It is noteworthy that for both NPA and QTAIM, HF exhibits the slowest basis set convergence when contrasted with the correlation components of MP2 and CCSD. Triples corrections in CCSD(T), denoted as CCSD(T)-CCSD, exhibit even faster basis set convergence.
△ Less
Submitted 4 April, 2024; v1 submitted 21 September, 2023;
originally announced September 2023.
-
A Cryogenic Tune and Match Circuit for Magnetic Resonance Microscopy at 15.2T
Authors:
Benjamin M. Hardy,
Gary Drake,
Shuyang Chai,
Bibek Dhakal,
Jonathan B. Martin,
Junzhong Xu,
Mark D. Does,
Adam W. Anderson,
Xinqiang Yan,
John C. Gore
Abstract:
Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common…
▽ More
Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common in high field systems but proves difficult to insulate the sample from extreme temperatures. We designed a chamber to cool only the tune and match circuitry to show it is possible to achieve much of the available SNR gain available for cooled coils. We designed a microcoil circuit to resonate at 650 MHz for imaging on a 15.2 T scanner. Surface loops and solenoids of varying diameters were tested to determine the largest diameter coil that demonstrated significant SNR gains from cooling. A liquid N2 cryochamber was designed to cool the circuitry while leaving the RF coil in ambient air. As the cryochamber was filled with liquid N2, Q-factors were measured on the bench while monitoring the coil's surface temperature. Improvements of SNR on images of solutions were demonstrated via cooling the tune and match circuit in the magnet bore. At 650 MHz, loops and solenoids < 3 mm in diameter showed significant improvements in quality factor on the bench. The resistance of the variable capacitors and the coaxial cable were measured to be 45% and 32% of room temperature values near the Larmor frequency. Images obtained with a 2 turn, 3 mm diameter loop with the matching circuit at room temperature and then cooled with liquid nitrogen demonstrated SNR improvements of a factor of 2. By cooling the tune and match circuit and leaving the surface loop in ambient air, SNR was improved by a factor of 2. The results are significant because it allows for more space to insulate the sample from extreme temperatures.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
Is valence CCSD(T) enough for the binding of water clusters? The isomers of (H$_2$O)$_6$ and (H$_2$O)$_{20}$ as a case study
Authors:
Golokesh Santra,
Margarita Shepelenko,
Emmanouil Semidalas,
Jan M. L. Martin
Abstract:
Benchmark calculations on noncovalent interactions typically exclude correlation effects beyond valence CCSD(T) owing to their steep computational cost scaling. In this work, we consider their importance for water clusters, specifically, eight isomers of (H$_2$O)$_6$ and four Wales-Hodges isomers of (H$_2$O)$_{20}$. Higher order connected triples, $T_3$--(T), reduce dissociation energies of the la…
▽ More
Benchmark calculations on noncovalent interactions typically exclude correlation effects beyond valence CCSD(T) owing to their steep computational cost scaling. In this work, we consider their importance for water clusters, specifically, eight isomers of (H$_2$O)$_6$ and four Wales-Hodges isomers of (H$_2$O)$_{20}$. Higher order connected triples, $T_3$--(T), reduce dissociation energies of the latter by about 0.4 kcal/mol, but this is more than compensated by an increase of up to 0.85 kcal/mol due to connected quadruple excitations. In general, higher-order correlation effects favor more compact isomers over more `spread-out' ones. We also consider additional small effects for balance: scalar relativistics reduce binding in (H$_2$O)$_{20}$ by ca. --0.4 kcal/mol, which fortuitously is compensated by the ca. 0.55 kcal/mol diagonal Born-Oppenheimer correction. Core-valence correlation has the greatest impact, at ca. 1.3 kcal/mol for the icosamer.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
Can G4-like Composite Ab Initio Methods Accurately Predict Vibrational Harmonic Frequencies?
Authors:
Emmanouil Semdalas,
Jan M. L. Martin
Abstract:
Minimally empirical G4-like composite wavefunction theories [E. Semidalas and J. M. L. Martin, \textit{J. Chem. Theory Comput.} {\bf 16}, 4238-4255 and 7507-7524 (2020)] trained against the large and chemically diverse GMTKN55 benchmark suite have demonstrated both accuracy and cost-effectiveness in predicting thermochemistry, barrier heights, and noncovalent interaction energies. Here, we assess…
▽ More
Minimally empirical G4-like composite wavefunction theories [E. Semidalas and J. M. L. Martin, \textit{J. Chem. Theory Comput.} {\bf 16}, 4238-4255 and 7507-7524 (2020)] trained against the large and chemically diverse GMTKN55 benchmark suite have demonstrated both accuracy and cost-effectiveness in predicting thermochemistry, barrier heights, and noncovalent interaction energies. Here, we assess the spectroscopic accuracy of top-performing methods: G4-\textit{n}, cc-G4-\textit{n}, and G4-\textit{n}-F12, and validate them against explicitly correlated coupled cluster CCSD(T*)(F12*) harmonic vibrational frequencies and experimental data from the HFREQ2014 dataset, of small first- and second-row polyatomics. G4-T is three times more accurate than plain CCSD(T)/def2-TZVP, while G4-T$_{\rm ano}$ is two times superior to CCSD(T)/ano-pVTZ. Combining CCSD(T)/ano-pVTZ with MP2-F12 in a parameter-free composite scheme results to a root-mean-square deviation of ~5 cm$^{-1}$ relative to experiment, comparable to CCSD(T) at the complete basis set limit. Application to the harmonic frequencies of benzene reveals a significant advantage of composites with ANO basis sets -- MP2/ano-pV\textit{m}Z and [CCSD(T)-MP2]/ano-pVTZ (\textit{m} = Q or 5) -- over similar protocols based on CCSD(T)/def2-TZVP. Overall, G4-type composite energy schemes, particularly when combined with ANO basis sets in CCSD(T), are accurate and comparatively inexpensive tools for computational vibrational spectroscopy.
△ Less
Submitted 22 September, 2023; v1 submitted 11 August, 2023;
originally announced August 2023.
-
Thermal physics in the data age -- students judge the applicability of the equipartition theorem
Authors:
J. D. D. Martin
Abstract:
Providing students of introductory thermal physics with a plot of the heat capacities of many low density gases as a function of temperature allows them to look for systematic trends. Specifically, large amounts of heat capacity data allow students to discover the equipartition theorem, but also point to its limited applicability. Computer code to download and plot the temperature-dependent heat c…
▽ More
Providing students of introductory thermal physics with a plot of the heat capacities of many low density gases as a function of temperature allows them to look for systematic trends. Specifically, large amounts of heat capacity data allow students to discover the equipartition theorem, but also point to its limited applicability. Computer code to download and plot the temperature-dependent heat capacity data is provided.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
On the relevance of weak measurements in dissipative quantum systems
Authors:
Lorena Ballesteros Ferraz,
John Martin,
Yves Caudano
Abstract:
We investigate the impact of dissipation on weak measurements. While weak measurements have been successful in signal amplification, dissipation can compromise their usefulness. More precisely, we show that in systems with non-degenerate eigenstates, weak values always converge to the expectation value of the measured observable as dissipation time tends to infinity, in contrast to systems with de…
▽ More
We investigate the impact of dissipation on weak measurements. While weak measurements have been successful in signal amplification, dissipation can compromise their usefulness. More precisely, we show that in systems with non-degenerate eigenstates, weak values always converge to the expectation value of the measured observable as dissipation time tends to infinity, in contrast to systems with degenerate eigenstates, where the weak values can remain anomalous, i.e., outside the range of eigenvalues of the observable, even in the limit of an infinite dissipation time. In addition, we propose a method for extracting information about the dissipative dynamics of a system using weak values at short dissipation times. Specifically, we explore the amplification of the dissipation rate in a two-level system and the use of weak values to differentiate between Markovian and non-Markovian dissipative dynamics. We also find that weak measurements operating around a weak atom-cavity coupling can probe the atom dissipation through the weak value of non-Hermitian operators within the rotating-wave approximation of the weak interaction.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Post-CCSD(T) corrections to bond distances and vibrational frequencies: the power of $Λ$
Authors:
Maciej Spiegel,
Emmanouil Semidalas,
Jan M. L. Martin,
Megan R. Bentley,
John F. Stanton
Abstract:
The importance of post-CCSD(T) corrections as high as CCSDTQ56 for ground-state spectroscopic constants ($D_e$, $ω_e$, $ω_ex_e$, and $α_e$) has been surveyed for a sample of two dozen mostly heavy-atom diatomics spanning a broad range of static correlation strength. While CCSD(T) is known to be an unusually felicitous `Pauling point' between accuracy and computational cost, performance leaves some…
▽ More
The importance of post-CCSD(T) corrections as high as CCSDTQ56 for ground-state spectroscopic constants ($D_e$, $ω_e$, $ω_ex_e$, and $α_e$) has been surveyed for a sample of two dozen mostly heavy-atom diatomics spanning a broad range of static correlation strength. While CCSD(T) is known to be an unusually felicitous `Pauling point' between accuracy and computational cost, performance leaves something to be desired for molecules with strong static correlation. We find CCSDT(Q)$_Λ$ to be the next `sweet spot' up, of comparable or superior quality to the much more expensive CCSDTQ. A similar comparison applies to CCSDTQ(5)$_Λ$ vs. CCSDTQ5, while CCSDTQ5(6)$_Λ$ is essentially indistinguishable from CCSDTQ56. A composite of CCSD(T)-X2C/ACV5Z-X2C with [CCSDT(Q)$_Λ$ -- CCSD(T)]/cc-pVTZ or even cc-pVDZ basis sets appears highly effective for computational vibrational spectroscopy. Unlike CCSDT(Q) which breaks down for the ozone vibrational frequencies, CCSDT(Q)$_Λ$ handles them gracefully.
△ Less
Submitted 22 August, 2023; v1 submitted 27 July, 2023;
originally announced July 2023.
-
Comment on "Matter-wave interferometry with helium atoms in low-$l$ Rydberg states''
Authors:
D. Z. Chan,
J. D. D. Martin
Abstract:
Tommey and Hogan [Phys. Rev. A, 104, 033305 (2021)] have reported a matter-wave interference experiment using Rydberg atoms traveling through inhomogeneous electric fields at approximately 2000 m/s. Using a simplified model containing the essential physics of their experiment, we show that the phase difference measured by their observed interference fringes does not depend -- in any significant wa…
▽ More
Tommey and Hogan [Phys. Rev. A, 104, 033305 (2021)] have reported a matter-wave interference experiment using Rydberg atoms traveling through inhomogeneous electric fields at approximately 2000 m/s. Using a simplified model containing the essential physics of their experiment, we show that the phase difference measured by their observed interference fringes does not depend -- in any significant way -- on the acceleration of the Rydberg atoms, but instead simply on the uniform motion of the atoms through the inhomogeneous electric field.
△ Less
Submitted 7 August, 2023; v1 submitted 11 June, 2023;
originally announced June 2023.
-
Multipolar Pseudochirality Induced Optical Torque
Authors:
Karim Achouri,
Mintae Chung,
Andrei Kiselev,
Olivier J. F. Martin
Abstract:
It has been observed that achiral nano-particles, such as flat helices, may be subjected to an optical torque even when illuminated by normally incident linearly polarized light. However, the origin of this fascinating phenomenon has so far remained mostly unexplained. We therefore propose an exhaustive discussion that provides a clear and rigorous explanation for the existence of such a torque. U…
▽ More
It has been observed that achiral nano-particles, such as flat helices, may be subjected to an optical torque even when illuminated by normally incident linearly polarized light. However, the origin of this fascinating phenomenon has so far remained mostly unexplained. We therefore propose an exhaustive discussion that provides a clear and rigorous explanation for the existence of such a torque. Using multipolar theory, and taking into account nonlocal interactions, we find that this torque stems from multipolar pseudochiral responses that generate both spin and orbital angular momenta. We also show that the nature of these peculiar responses makes them particularly dependent on the asymmetry of the particles. By elucidating the origin of this type of torque, this work may prove instrumental for the design of high-performance nano-rotors.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Topological and conventional nano-photonic waveguides for chiral integrated quantum optics
Authors:
N. J Martin,
M. Jalali Mehrabad,
X. Chen,
R. Dost,
E. Nussbaum,
D. Hallett,
L. Hallacy,
A. Foster,
E. Clarke,
P. K. Patil,
S. Hughes,
M. Hafezi,
A. M Fox,
M. S. Skolnick,
L. R. Wilson
Abstract:
Chirality in integrated quantum photonics has emerged as a promising route towards achieving scalable quantum technologies with quantum nonlinearity effects. Topological photonic waveguides, which utilize helical optical modes, have been proposed as a novel approach to harnessing chiral light-matter interactions on-chip. However, uncertainties remain regarding the nature and strength of the chiral…
▽ More
Chirality in integrated quantum photonics has emerged as a promising route towards achieving scalable quantum technologies with quantum nonlinearity effects. Topological photonic waveguides, which utilize helical optical modes, have been proposed as a novel approach to harnessing chiral light-matter interactions on-chip. However, uncertainties remain regarding the nature and strength of the chiral coupling to embedded quantum emitters, hindering the scalability of these systems. In this work, we present a comprehensive investigation of chiral coupling in topological photonic waveguides using a combination of experimental, theoretical, and numerical analyses. We quantitatively characterize the position-dependence nature of the light-matter coupling on several topological photonic waveguides and benchmark their chiral coupling performance against conventional line defect waveguides for chiral quantum optical applications. Our results provide crucial insights into the degree and characteristics of chiral light-matter interactions in topological photonic quantum circuits and pave the way towards the implementation of quantitatively-predicted quantum nonlinear effects on-chip.
△ Less
Submitted 20 January, 2024; v1 submitted 18 May, 2023;
originally announced May 2023.
-
Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water
Authors:
M. Harada,
K. Abe,
C. Bronner,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Okamoto,
K. Sato,
H. Sekiya,
H. Shiba
, et al. (216 additional authors not shown)
Abstract:
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w…
▽ More
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging.
△ Less
Submitted 30 May, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Quadrupolar susceptibility modeling of substrated metasurfaces with application to the generalized Brewster effect
Authors:
Ville Tiukuvaara,
Olivier J. F. Martin,
Karim Achouri
Abstract:
We derive generalized sheet transition conditions (GSTCs) including dipoles and quadrupoles, using generalized functions (distributions). This derivation verifies that the GSTCs are valid for metasurfaces in non-homogeneous environments, such as for practical metasurfaces fabricated on a substrate. The inclusion of quadrupoles and modeling of spatial dispersion provides additional hyper-susceptibi…
▽ More
We derive generalized sheet transition conditions (GSTCs) including dipoles and quadrupoles, using generalized functions (distributions). This derivation verifies that the GSTCs are valid for metasurfaces in non-homogeneous environments, such as for practical metasurfaces fabricated on a substrate. The inclusion of quadrupoles and modeling of spatial dispersion provides additional hyper-susceptibility components which serve as degrees of freedom for wave transformations. We leverage them to demonstrate a generalized Brewster effect with multiple angles of incidence at which reflection is suppressed, along with an ``anti-Brewster'' effect where transmission is suppressed.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Demonstration of a plasmonic nonlinear pseudo-diode
Authors:
Sergejs Boroviks,
Andrei Kiselev,
Karim Achouri,
Olivier J. F. Martin
Abstract:
We demonstrate a nonlinear plasmonic metasurface that exhibits strongly asymmetric second-harmonic generation: nonlinear scattering is efficient upon excitation in one direction and it is substantially suppressed when the excitation direction is reversed, thus enabling a diode-like functionality. A significant (approximately 10 dB) extinction ratio of SHG upon opposite excitations is measured expe…
▽ More
We demonstrate a nonlinear plasmonic metasurface that exhibits strongly asymmetric second-harmonic generation: nonlinear scattering is efficient upon excitation in one direction and it is substantially suppressed when the excitation direction is reversed, thus enabling a diode-like functionality. A significant (approximately 10 dB) extinction ratio of SHG upon opposite excitations is measured experimentally and those findings are substantiated with full-wave simulations. The combination of two commonly used metals - aluminium and silver - produces a material composition asymmetry that results into a bianisotropic response of the system, as confirmed by performing homogenization analysis and extracting an effective susceptibility tensor. Finally, we discuss the implications of our results from the more fundamental perspectives of reciprocity and time-reversal asymmetry.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
The importance of tight $f$ basis functions for heavy p-block oxides and halides: a parallel with tight $d$ functions in the second row
Authors:
Nisha Mehta,
Jan M. L. Martin
Abstract:
It is well-known that both wavefunction ab initio and DFT calculations on second-row compounds exhibit anomalously slow basis set convergence unless the basis sets are augmented with additional `tight' (high-exponent) $d$ functions, as in the cc-pV($n+d$)Z and aug-cc-pV($n+d$)Z basis sets. This has been rationalized as being necessary for a better description of the low-lying $3d$ orbital, which a…
▽ More
It is well-known that both wavefunction ab initio and DFT calculations on second-row compounds exhibit anomalously slow basis set convergence unless the basis sets are augmented with additional `tight' (high-exponent) $d$ functions, as in the cc-pV($n+d$)Z and aug-cc-pV($n+d$)Z basis sets. This has been rationalized as being necessary for a better description of the low-lying $3d$ orbital, which as the oxidation state increases sinks low enough to act as a back-donation acceptor from chalcogen and halogen lone pairs. This prompts the question whether a similar phenomenon exists for the isovalent compounds of the heavy p-block. We show that for the fourth and fifth row, this is the case, but this time for tight $f$ functions enhancing the description of the low-lying $4f$ and $5f$ Rydberg orbitals, respectively. In the third-row heavy $p$ block, the $4f$ orbitals are too far up, while the $4d$ orbitals are adequately covered by the basis functions already present to describe the $3d$ subvalence orbitals.
△ Less
Submitted 25 April, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Mode selection in concentric jets. The steady-steady 1:2 resonant mode interaction with O(2) symmetry
Authors:
Adrián Corrochano,
Javier Sierra-Ausín,
Juan Ángel Martin,
David Fabre,
Soledad Le Clainche
Abstract:
In this article, a thorough characterization of the configuration composed by two concentric jets at a low Reynolds number is presented. The analysis comprises a layout with a wide range for the velocity ratio between the inner and outer jets, defined within the interval [0, 2], and also details the influence of the distance between jets, where the wall thicknesses separating the two jets is [0.5,…
▽ More
In this article, a thorough characterization of the configuration composed by two concentric jets at a low Reynolds number is presented. The analysis comprises a layout with a wide range for the velocity ratio between the inner and outer jets, defined within the interval [0, 2], and also details the influence of the distance between jets, where the wall thicknesses separating the two jets is [0.5, 4]. Global linear stability analysis identifies the most significant modes driving the changes in the flow dynamics. The neutral lines revealing the critical Reynolds number connected to the presence of the main (steady and unsteady) flow bifurcations, which are presented by global azimuthal modes, show the high complexity of the problem under study, where hysteresis and other types of complex cycles are pointed out. Finally, the mode interaction is analysed, highlighting the presence of travelling waves emerging from the interaction of steady states, and the existence of robust heteroclinic cycles that are asymptotically stable. The high level of detail in the results presented, makes this work as a reference for future research development in the field of concentric jets.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
A double-hybrid density functional based on good local physics with outstanding performance on the GMTKN55 database
Authors:
Axel D. Becke,
Golokesh Santra,
Jan M. L. Martin
Abstract:
In two recent papers [A. D. Becke, J. Chem. Phys. 156, 214101 (2022) and 157, 234102 (2022)] we compared two Kohn-Sham density functionals based on physical modelling and theory with the best density-functional power-series fits in the literature. The best error statistics reported to date for a hybrid functional on the GMTKN55 chemical database of Goerigk, Grimme, and coworkers [Phys. Chem. Chem.…
▽ More
In two recent papers [A. D. Becke, J. Chem. Phys. 156, 214101 (2022) and 157, 234102 (2022)] we compared two Kohn-Sham density functionals based on physical modelling and theory with the best density-functional power-series fits in the literature. The best error statistics reported to date for a hybrid functional on the GMTKN55 chemical database of Goerigk, Grimme, and coworkers [Phys. Chem. Chem. Phys. 19, 32184 (2017)] were obtained. In the present work, additional second-order perturbation-theory terms are considered. The result is a 12-parameter double-hybrid (DH) density functional with the lowest GMTKN55 "WTMAD2" error yet seen for a DH functional. We call it "DH23".
△ Less
Submitted 22 March, 2023; v1 submitted 3 January, 2023;
originally announced January 2023.
-
Experimental demonstration of diffusion limitations on resolution and SNR in MR microscopy
Authors:
Benjamin M. Hardy,
Yue Zhu,
Kevin D. Harkins,
Bibek Dhakal,
Jonathan B. Martin,
Junzhong Xu,
Mark D. Does,
Adam W. Anderson,
John C. Gore
Abstract:
Magnetic resonance microscopy images at cellular resolution (< 10 microns) are limited by diffusion. SNR and spatial resolution suffer from the dephasing of transverse magnetization caused by diffusion of spins in strong gradients. Such effects may be reduced by using phase encoding instead of frequency encoding readout gradients. Demonstration of the benefits of phase encoding are lacking, and th…
▽ More
Magnetic resonance microscopy images at cellular resolution (< 10 microns) are limited by diffusion. SNR and spatial resolution suffer from the dephasing of transverse magnetization caused by diffusion of spins in strong gradients. Such effects may be reduced by using phase encoding instead of frequency encoding readout gradients. Demonstration of the benefits of phase encoding are lacking, and the conditions in which it is preferred are not clearly established. We quantify when phase encoding outperforms a readout gradient with emphasis on the detrimental effects of diffusion on SNR and resolution. A 15.2T MRI scanner, with 1 T/m gradients, and micro solenoid RF coils < 1 mm in diameter, were used to quantify diffusion effects on resolution and SNR of frequency and phase encoded acquisitions. Frequency and phase encoding resolution and SNR per square root time were calculated and measured for images at the diffusion limited resolution. The point-spread-function was measured for phase and frequency encoding using additional constant time gradients with voxels 3-15 microns. The effect of diffusion during the readout gradient on SNR was experimentally demonstrated. The achieved resolutions of frequency and phase encoded acquisitions were measured via the point-spread-function. SNR per square root time and actual resolution were calculated for a wide range of gradient amplitudes, diffusion coefficients, and relaxation properties. The results provide a practical guide on how to choose between phase and frequency encoding. Images of excised rat spinal cord at 10 x 10 microns in-plane demonstrate benefits of phase encoding in the form of higher measured resolution and SNR vs the same image acquired with a conventional readout. We demonstrate the extent to which phase encoding outperforms readout gradients in SNR and resolution over a wide range of voxel sizes, sample, and hardware properties.
△ Less
Submitted 3 January, 2023; v1 submitted 2 January, 2023;
originally announced January 2023.
-
Qudit entanglers using quantum optimal control
Authors:
Sivaprasad Omanakuttan,
Anupam Mitra,
Eric J. Meier,
Michael J. Martin,
Ivan H Deutsch
Abstract:
We study the generation of two-qudit entangling quantum logic gates using two techniques in quantum optimal control. We take advantage of both continuous, Lie-algebraic control and digital, Lie-group control. In both cases, the key is access to a time-dependent Hamiltonian which can generate an arbitrary unitary matrix in the group SU($d^2$). We find efficient protocols for creating high-fidelity…
▽ More
We study the generation of two-qudit entangling quantum logic gates using two techniques in quantum optimal control. We take advantage of both continuous, Lie-algebraic control and digital, Lie-group control. In both cases, the key is access to a time-dependent Hamiltonian which can generate an arbitrary unitary matrix in the group SU($d^2$). We find efficient protocols for creating high-fidelity entangling gates. As a test of our theory, we study the case of qudits robustly encoded in nuclear spins of alkaline earth atoms and manipulated with magnetic and optical fields, with entangling interactions arising from the well-known Rydberg blockade. We applied this in a case study based on a $d=10$ dimensional qudit encoded in the $I=9/2$ nuclear spin in $^{87}$Sr, controlled through a combination of nuclear spin-resonance, a tensor AC-Stark shift, and Rydberg dressing, which allows us to generate an arbitrary symmetric entangling two-qudit gate such as CPhase. Our techniques can be used to implement qudit entangling gates for any $2\le d \le10$ encoded in the nuclear spin. We also studied how decoherence due to the finite lifetime of the Rydberg states affects the creation of the CPhase gate and found, through numerical optimization, a fidelity of $0.9985$, $0.9980$, $0.9942$, and $0.9800$ for $d=2$, $d=3$, $d=5$, and $d=7$ respectively. This provides a powerful platform to explore the various applications of quantum information processing of qudits including metrological enhancement with qudits, quantum simulation, universal quantum computation, and quantum error correction.
△ Less
Submitted 27 June, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Status of the X17 search in Montreal
Authors:
G. Azuelos,
B. Broerman,
D. Bryman,
W. C. Chen,
H. N. da Luz,
L. Doria,
A. Gupta,
L-A. Hamel,
M. Laurin,
K. Leach,
G. Lefebvre,
J-P. Martin,
A. Robinson,
N. Starinski,
R. Sykora,
D. Tiwari,
U. Wichoski,
V. Zacek
Abstract:
At the Montreal Tandem accelerator, an experiment is being set up to measure internal pair creation from the decay of nuclear excited states using a multiwire proportional chamber and scintillator bars surrounding it from the DAPHNE experiment. The acceptance covers a solid angle of nearly 4$π$. Preamplifiers and the data acquisition hardware have been designed and tested. The water-cooled $^7$LiF…
▽ More
At the Montreal Tandem accelerator, an experiment is being set up to measure internal pair creation from the decay of nuclear excited states using a multiwire proportional chamber and scintillator bars surrounding it from the DAPHNE experiment. The acceptance covers a solid angle of nearly 4$π$. Preamplifiers and the data acquisition hardware have been designed and tested. The water-cooled $^7$LiF target, mounted on an Al foil is in a thin carbon fiber section of the beamline. The experiment will focus at first on a measurement of the internal pair creation from the 18.15 MeV state of $^8$Be. Assuming the ATOMKI evaluation of the electron-pair production rate from X17, a Geant4 simulation predicts observation of a clear signal after about two weeks of data taking with a 2 $μ$A proton beam. The IPC measurement could eventually be extended to the giant dipole resonance of $^8$Be, as well as to other nuclei, in particular to $^{10}$B.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Is explicitly correlated double hybrid DFT advantageous for vibrational frequencies?
Authors:
Nisha Mehta,
Golokesh Santra,
Jan M. L. Martin
Abstract:
We have investigated the effect of F12 geminals on the basis set convergence of harmonic frequencies calculated using two representative double-hybrid density functionals, namely B2GP-PLYP and revDSD-PBEP86-D4. Like previously found for energetics [N. Mehta and J. M. L. Martin, \textit{J. Chem. Theor. Comput.} \textbf{18}, 5978--5991 (2022)] one sees an acceleration by two zeta steps, such that ev…
▽ More
We have investigated the effect of F12 geminals on the basis set convergence of harmonic frequencies calculated using two representative double-hybrid density functionals, namely B2GP-PLYP and revDSD-PBEP86-D4. Like previously found for energetics [N. Mehta and J. M. L. Martin, \textit{J. Chem. Theor. Comput.} \textbf{18}, 5978--5991 (2022)] one sees an acceleration by two zeta steps, such that even the cc-pVDZ-F12 basis set is quite close to the complete basis set (CBS) limit. However, the basis set convergence problem is not as acute as for energetics, and compared to experimental harmonic frequencies, conventional orbital calculations with augmented triple zeta quality basis set are acceptably close to the CBS limit, and can be carried out using analytical second derivatives. An efficient implementation of double hybrid-F12 analytical derivatives would make the F12 approach attractive in the sense that even an $spd$ orbital basis set would be adequate. For the accurate revDSD-PBEP86-D4 functional, the role of differing local correlation terms (Perdew-Zunger 1981 vs. VWN5) in different electronic structure programs has been investigated: while optimal double hybrid parameters and performance statistics for energetics as well as frequencies differ slightly between the two implementations, these differences are insignificant for practical purposes.
△ Less
Submitted 12 December, 2022; v1 submitted 6 November, 2022;
originally announced November 2022.
-
Mind the gap between theory and experiment
Authors:
Andrei Kiselev,
Jeonghyeon Kim,
Olivier J. F. Martin
Abstract:
We discuss some examples where numerical simulations based on effectively fabricated nanostructures can provide additional insights into an experiment. Focusing on plasmonics, we study Fano resonant systems for optical trap**, realistic dipole antennas for near-field enhancement, and hybrid nanostructures that combine plasmonic metals with dielectrics refractive index sensing. For those systems,…
▽ More
We discuss some examples where numerical simulations based on effectively fabricated nanostructures can provide additional insights into an experiment. Focusing on plasmonics, we study Fano resonant systems for optical trap**, realistic dipole antennas for near-field enhancement, and hybrid nanostructures that combine plasmonic metals with dielectrics refractive index sensing. For those systems, the same experimental detail can play a very different role, depending on the type of physical observable. For example, roughness can significantly influence the near-field, but be totally unnoticed in the far-field. It can affect molecules adsorbed on the surface, while refractive index sensing can be fully immune to such roughness. Approaching the experimental situation as closely as possible is certainly a challenging task and we demonstrate a simple approach based on SEM images for that. Altogether, bridging the gap between theory and experiment is not such a trivial task. However, some of the simple steps illustrated in this chapter can help build numerical models that match the experiment better.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Searching for neutrinos from solar flares across solar cycles 23 and 24 with the Super-Kamiokande detector
Authors:
K. Okamoto,
K. Abe,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
Y. Kaneshima,
Y. Kataoka,
Y. Kashiwagi,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nagao,
M. Nakahata,
Y. Nakano,
S. Nakayama,
Y. Noguchi,
K. Sato,
H. Sekiya,
K. Shimizu,
M. Shiozawa
, et al. (220 additional authors not shown)
Abstract:
Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we…
▽ More
Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we searched for neutrino interactions within narrow time windows coincident with $γ$-rays and soft X-rays recorded by satellites. In addition, we performed the first attempt to search for solar-flare neutrinos from solar flares on the invisible side of the Sun by using the emission time of coronal mass ejections (CMEs). By selecting twenty powerful solar flares above X5.0 on the visible side and eight CMEs whose emission speed exceeds $2000$ $\mathrm{km \, s^{-1}}$ on the invisible side from 1996 to 2018, we found two (six) neutrino events coincident with solar flares occurring on the visible (invisible) side of the Sun, with a typical background rate of $0.10$ ($0.62$) events per flare in the MeV-GeV energy range. No significant solar-flare neutrino signal above the estimated background rate was observed. As a result we set the following upper limit on neutrino fluence at the Earth $\mathitΦ<1.1\times10^{6}$ $\mathrm{cm^{-2}}$ at the $90\%$ confidence level for the largest solar flare. The resulting fluence limits allow us to constrain some of the theoretical models for solar-flare neutrino emission.
△ Less
Submitted 26 October, 2022; v1 submitted 24 October, 2022;
originally announced October 2022.
-
Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector
Authors:
K. Abe,
Y. Haga,
Y. Hayato,
K. Hiraide,
K. Ieki,
M. Ikeda,
S. Imaizumi,
K. Iyogi,
J. Kameda,
Y. Kanemura,
Y. Kataoka,
Y. Kato,
Y. Kishimoto,
S. Miki,
S. Mine,
M. Miura,
T. Mochizuki,
S. Moriyama,
Y. Nagao,
M. Nakahata,
T. Nakajima,
Y. Nakano,
S. Nakayama,
T. Okada,
K. Okamoto
, et al. (281 additional authors not shown)
Abstract:
We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr…
▽ More
We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs.
△ Less
Submitted 20 September, 2022; v1 submitted 18 September, 2022;
originally announced September 2022.
-
Performance of Localized-Orbital Coupled Cluster Approaches for the Conformational Energies of Longer n-alkane Chains
Authors:
Golokesh Santra,
Jan M. L. Martin
Abstract:
We report an update and enhancement of the ACONFL (conformer energies of large alkanes [Ehlert, S.; Grimme, S.; Hansen, A. J. Phys. Chem. A 2022, 126, 3521-3535]) dataset. For the ACONF12 (n-dodecane) subset, we report basis set limit canonical CCSD(T) reference data obtained from MP2-F12/cc-pV{T,Q}Z-F12 extrapolation, [CCSD(F12*)-MP2-F12]/aug-cc-pVTZ-F12, and a (T) correction from conventional CC…
▽ More
We report an update and enhancement of the ACONFL (conformer energies of large alkanes [Ehlert, S.; Grimme, S.; Hansen, A. J. Phys. Chem. A 2022, 126, 3521-3535]) dataset. For the ACONF12 (n-dodecane) subset, we report basis set limit canonical CCSD(T) reference data obtained from MP2-F12/cc-pV{T,Q}Z-F12 extrapolation, [CCSD(F12*)-MP2-F12]/aug-cc-pVTZ-F12, and a (T) correction from conventional CCSD(T)/aug-cc-pV{D,T}Z calculations. Then we explored the performance of a variety of single and composite localized-orbital CCSD(T) approximations, ultimately finding an affordable LNO-CCSD(T)-based post-MP2 correction that agrees to 0.008 kcal/mol MAD (mean absolute deviation) with the revised canonical reference data. In tandem with canonical MP2-F12/CBS extrapolation, this was then used to re-evaluate the ACONF16 and ACONF20 subsets for n-hexadecane and n-icosane, respectively. A revised ACONFL set was thus obtained. It was then used to assess the performance of different localized-orbital coupled cluster approaches, such as PNO-LCCSD(T) as implemented in MOLPRO, DLPNO-CCSD (T1) as implemented in ORCA, and LNO-CCSD(T) as implemented in MRCC, at their various accuracy settings. A three-tier LNO-CCSD(T)-based composite scheme disagrees by only 0.02 kcal/mol from the revised ACONFL reference data. When extrapolated to the complete PNO space limit, DLPNO-CCSD(T1, Tight) and a composite method are the best picks among all the localized coupled cluster methods tested for the dodecane conformers. Dispersion-corrected dRPA-based double hybrids perform remarkably well for the ACONFL set. While the revised reference data do not affect any conclusions on the less accurate methods, they may upend orderings for more accurate methods with error statistics on the same order as the difference between reference datasets.
△ Less
Submitted 9 November, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Influence of target thickness on the release of radioactive atoms
Authors:
Julien Guillot,
Brigitte Roussiere,
Sandrine Tusseau-Nenez,
Nicole Barre-Boscher,
Elie Borg,
Julien Martin
Abstract:
Nowadays, intense exotic beams are needed in order to study nuclei with very short half-life. To increase the release efficiency of the fission products, all the target characteristics involved must be improved (e.g. chemical composition, dimensions, physicochemical properties such as grain size, porosity, density etc). In this article, we study the impact of the target thickness. Released fractio…
▽ More
Nowadays, intense exotic beams are needed in order to study nuclei with very short half-life. To increase the release efficiency of the fission products, all the target characteristics involved must be improved (e.g. chemical composition, dimensions, physicochemical properties such as grain size, porosity, density etc). In this article, we study the impact of the target thickness. Released fractions measured from graphite and uranium carbide pellets are presented as well as Monte-Carlo simulations of the Brownian motion.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Spatial Symmetries in Multipolar Metasurfaces: From Asymmetric Angular Transmittance to Multipolar Extrinsic Chirality
Authors:
Karim Achouri,
Ville Tiukuvaara,
Olivier J. F. Martin
Abstract:
We propose a framework that connects the spatial symmetries of a metasurface to its material parameter tensors and its scattering matrix. This provides a simple yet effective way to effortlessly determine properties of a metasurface scattering response, such as chirality or asymmetric transmission, and which of its effective material parameters should be taken into account in the prospect of a hom…
▽ More
We propose a framework that connects the spatial symmetries of a metasurface to its material parameter tensors and its scattering matrix. This provides a simple yet effective way to effortlessly determine properties of a metasurface scattering response, such as chirality or asymmetric transmission, and which of its effective material parameters should be taken into account in the prospect of a homogenization procedure.
In contrast to existing techniques, this approach does not require any a priori knowledge of group theory or complicated numerical simulation schemes, hence making it fast, easy to use and accessible. Its working principle consists in recursively solving symmetry-invariance conditions that apply to dipolar and quadrupolar material parameters, which include nonlocal interactions, as well as the metasurface scattering matrix. The overall process thus only requires listing the spatial symmetries of the metasurface.
Using the proposed framework, we demonstrate the existence of multipolar extrinsic chirality, which is a form of chiral response that is achieved in geometrically achiral structures sensitive to field gradients even at normal incidence.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Multipolar expansions for scattering and optical force calculations beyond the long wavelength approximation
Authors:
Marco Riccardi,
Andrei Kiselev,
Karim Achouri,
Olivier J. F. Martin
Abstract:
We review three different approaches for the calculation of electromagnetic multipoles, namely the Cartesian primitive multipoles, the Cartesian irreducible multipoles and the spherical multipoles. We identify the latter as the best suited to describe the scattering of electromagnetic radiation, as exemplified for an amorphous silicon sphere. These multipoles are then used to calculate the optical…
▽ More
We review three different approaches for the calculation of electromagnetic multipoles, namely the Cartesian primitive multipoles, the Cartesian irreducible multipoles and the spherical multipoles. We identify the latter as the best suited to describe the scattering of electromagnetic radiation, as exemplified for an amorphous silicon sphere. These multipoles are then used to calculate the optical force acting on semiconductor, dielectric or metallic particles in a wide wavelength range, from the dipolar down to the Mie regimes.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Searching for New Physics with DarkLight at the ARIEL Electron-Linac
Authors:
The DarkLight Collaboration,
E. Cline,
R. Corliss,
J. C. Bernauer,
R. Alarcon,
R. Baartman,
S. Benson,
J. Bessuille,
D. Ciarniello,
A. Christopher,
A. Colon,
W. Deconinck,
K. Dehmelt,
A. Deshpande,
J. Dilling,
D. H. Dongwi,
P. Fisher,
T. Gautam,
M. Gericke,
D. Hasell,
M. Hasinoff,
E. Ihloff,
R. Johnston,
R. Kanungo,
J. Kelsey
, et al. (21 additional authors not shown)
Abstract:
The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, w…
▽ More
The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, which could be explained by a new fifth force carrier with a mass of 17 MeV/$c^2$. The proposed DarkLight experiment would search for this potential low mass force carrier at ARIEL in the 10-20 MeV e$^+$e$^-$ invariant mass range. This proceeding will focus on the experimental design and physics case of the DarkLight experiment.
△ Less
Submitted 14 August, 2022; v1 submitted 8 August, 2022;
originally announced August 2022.
-
S66x8 Noncovalent Interactions Revisited: New Benchmark and Performance of Composite Localized Coupled-Cluster Methods
Authors:
Golokesh Santra,
Emmanouil Semidalas,
Nisha Mehta,
Amir Karton,
Jan M. L. Martin
Abstract:
The S66x8 noncovalent interactions benchmark has been re-evaluated at the "sterling silver" level, using explicitly correlated MP2-F12 near the complete basis set limit, CCSD(F12*)/aug-cc-pVTZ-F12, and a (T) correction from conventional CCSD(T)/sano-V{D,T}Z+ calculations. The revised reference value disagrees by 0.1 kcal/mol RMS with the original Hobza benchmark and its revision by Brauer et al, b…
▽ More
The S66x8 noncovalent interactions benchmark has been re-evaluated at the "sterling silver" level, using explicitly correlated MP2-F12 near the complete basis set limit, CCSD(F12*)/aug-cc-pVTZ-F12, and a (T) correction from conventional CCSD(T)/sano-V{D,T}Z+ calculations. The revised reference value disagrees by 0.1 kcal/mol RMS with the original Hobza benchmark and its revision by Brauer et al, but by only 0.04 kcal/mol variety from the "bronze" level data in Kesharwani et al., Aust. J. Chem. 71, 238-248 (2018). We then used these to assess the performance of localized-orbital coupled cluster approaches with and without counterpoise corrections, such as PNO-LCCSD(T) as implemented in MOLPRO, DLPNO-CCSD (T1) as implemented in ORCA, and LNO-CCSD(T) as implemented in MRCC, for their respective "Normal", "Tight", and "very Tight" settings. We also considered composite approaches combining different basis sets and cutoffs. Furthermore, in order to isolate basis set convergence from domain truncation error, for the aug-cc-pVTZ basis set we compared PNO, DLPNO, and LNO approaches with canonical CCSD(T). We conclude that LNO-CCSD(T) with veryTight criteria performs very well for "raw" (CP-uncorrected), but struggles to reproduce counterpoise-corrected numbers even for veryVeryTight criteria: this means that accurate results can be obtained using either extrapolation from basis sets large enough to quench basis set superposition error (BSSE) such as aug-cc-pV{Q,5}Z, or using a composite scheme such as Tight{T,Q}+1.11[vvTight(T) - Tight(T)]. In contrast, PNO-LCCSD(T) works best with counterpoise, while performance with and without counterpoise is comparable for DLPNO-CCSD(T1). Among more economical methods, the highest accuracies are seen for dRPA75-D3BJ, ωB97M-V, ωB97M(2), revDSD-PBEP86-D4, and DFT(SAPT) with a TDEXX or ATDEXX kernel.
△ Less
Submitted 27 October, 2022; v1 submitted 2 August, 2022;
originally announced August 2022.
-
Scintillator ageing of the T2K near detectors from 2010 to 2021
Authors:
The T2K Collaboration,
K. Abe,
N. Akhlaq,
R. Akutsu,
A. Ali,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
T. Arihara,
Y. Asada,
Y. Ashida,
E. T. Atkin,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
D. Barrow,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
L. Berns,
S. Bhadra,
A. Blanchet,
A. Blondel
, et al. (333 additional authors not shown)
Abstract:
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation…
▽ More
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
The Precision nEDM Measurement with UltraCold Neutrons at TRIUMF
Authors:
Ryohei Matsumiya,
Hiroaki Akatsuka,
Chris P. Bidinosti,
Charles A. Davis,
Beatrice Franke,
Derek Fujimoto,
Michael T. W. Gericke,
Pietro Giampa,
Robert Golub,
Sean Hansen-Romu,
Kichiji Hatanaka,
Tomohiro Hayamizu,
Takashi Higuchi,
Go Ichikawa,
Sohei Imajo,
Blair Jamieson,
Shinsuke Kawasaki,
Masaaki Kitaguchi,
Wolfgang Klassen,
Emma Klemets,
Akira Konaka,
Elie Korkmaz,
Ekaterina Korobkina,
Florian Kuchler,
Maedeh Lavvaf
, et al. (23 additional authors not shown)
Abstract:
The TRIUMF Ultra-Cold Advanced Neutron (TUCAN) collaboration aims at a precision neutron electric dipole moment (nEDM) measurement with an uncertainty of $10^{-27}\,e\cdot\mathrm{cm}$, which is an order-of-magnitude better than the current nEDM upper limit and enables us to test Supersymmetry. To achieve this precision, we are develo** a new high-intensity ultracold neutron (UCN) source using su…
▽ More
The TRIUMF Ultra-Cold Advanced Neutron (TUCAN) collaboration aims at a precision neutron electric dipole moment (nEDM) measurement with an uncertainty of $10^{-27}\,e\cdot\mathrm{cm}$, which is an order-of-magnitude better than the current nEDM upper limit and enables us to test Supersymmetry. To achieve this precision, we are develo** a new high-intensity ultracold neutron (UCN) source using super-thermal UCN production in superfluid helium (He-II) and a nEDM spectrometer. The current development status of them is reported in this article.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Investigation of Optical Coupling in Microwave Kinetic Inductance Detectors using Superconducting Reflective Plates
Authors:
Paul Nicaise,
Jie Hu,
Jean-Marc Martin,
Samir Beldi,
Christine Chaumont,
Piercarlo Bonifacio,
Michel Piat,
Hervé Geoffray,
Faouzi Boussaha
Abstract:
To improve the optical coupling in Microwave Kinetic Inductance Detectors (MKIDs), we investigate the use of a reflective plate beneath the meandered absorber. We designed, fabricated and characterized high-Q factors TiN-based MKIDs on sapphire operating at optical wavelengths with a Au/Nb reflective thin bilayer below the meander. The reflector is set at a quarter-wave distance from the meander u…
▽ More
To improve the optical coupling in Microwave Kinetic Inductance Detectors (MKIDs), we investigate the use of a reflective plate beneath the meandered absorber. We designed, fabricated and characterized high-Q factors TiN-based MKIDs on sapphire operating at optical wavelengths with a Au/Nb reflective thin bilayer below the meander. The reflector is set at a quarter-wave distance from the meander using a transparent Al$_2$O$_3$ dielectric layer to reach the peak photon absorption. We expect the plate to recover undetected photons by reflecting them back onto the absorber.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Topological Edge Mode Tapering
Authors:
Christopher J. Flower,
Sabyasachi Barik,
Mahmoud Jalali Mehrabad,
Nicholas J Martin,
Sunil Mittal,
Mohammad Hafezi
Abstract:
Mode tapering, or the gradual manipulation of the size of some mode, is a requirement for any system that aims to efficiently interface two or more subsystems of different mode sizes. While high efficiency tapers have been demonstrated, they often come at the cost of a large device footprint or challenging fabrication. Topological photonics, offering robustness to certain types of disorder as well…
▽ More
Mode tapering, or the gradual manipulation of the size of some mode, is a requirement for any system that aims to efficiently interface two or more subsystems of different mode sizes. While high efficiency tapers have been demonstrated, they often come at the cost of a large device footprint or challenging fabrication. Topological photonics, offering robustness to certain types of disorder as well as chirality, has proved to be a well-suited design principle for numerous applications in recent years. Here we present a new kind of mode taper realized through topological bandgap engineering. We numerically demonstrate a sixfold change in mode width over an extremely compact 8$μ$m distance with near unity efficiency in the optical domain. With suppressed backscattering and no excitation of higher-order modes, such a taper could enable new progress in the development of scalable, multi-component systems in classical and quantum optics.
△ Less
Submitted 11 May, 2023; v1 submitted 14 June, 2022;
originally announced June 2022.
-
Reduced-scaling double hybrid DFT with rapid basis set convergence through localized pair natural orbital F12
Authors:
Nisha Mehta,
Jan M. L. Martin
Abstract:
Following earlier work [Mehta, N.; Martin, J. M. L.; J. Chem. Theory Comput. 2022, 18, acs.jctc.2c00426] that showed how the slow basis set convergence of double hybrid density functional theory can be obviated by the use of F12 explicit correlation in the GLPT2 step (second order Görling-Levy perturbation theory), we demonstrate here, for the very large and chemically diverse GMTKN55 benchmark su…
▽ More
Following earlier work [Mehta, N.; Martin, J. M. L.; J. Chem. Theory Comput. 2022, 18, acs.jctc.2c00426] that showed how the slow basis set convergence of double hybrid density functional theory can be obviated by the use of F12 explicit correlation in the GLPT2 step (second order Görling-Levy perturbation theory), we demonstrate here, for the very large and chemically diverse GMTKN55 benchmark suite, and using the B2GP-PLYP-D3BJ functional as a proof of principle, that the CPU time scaling of this step can be reduced (asymptotically linearized) using the PNO-L (pair natural orbitals, localized) approximation, at negligible cost in accuracy.
△ Less
Submitted 30 September, 2022; v1 submitted 10 June, 2022;
originally announced June 2022.
-
Benefits of Range-separated Hybrid and Double-Hybrid Functionals for a Large and Diverse Dataset of Reaction Energies and Barrier Heights
Authors:
Golokesh Santra,
Rivka Calinsky,
Jan M. L. Martin
Abstract:
To better understand the thermochemical kinetics and mechanism of a specific chemical reaction, an accurate estimation of barrier heights (forward and reverse) and reaction energy are vital. Due to the large size of reactants and transition state structures involved in real-life mechanistic studies (e.g., enzymatically catalyzed reactions), DFT remains the workhorse for such calculations. In this…
▽ More
To better understand the thermochemical kinetics and mechanism of a specific chemical reaction, an accurate estimation of barrier heights (forward and reverse) and reaction energy are vital. Due to the large size of reactants and transition state structures involved in real-life mechanistic studies (e.g., enzymatically catalyzed reactions), DFT remains the workhorse for such calculations. In this paper, we have assessed the performance of 88 density functionals for modeling the reaction energies and barrier heights on a large and chemically diverse dataset (BH9) composed of 449 organic chemistry reactions. We have shown that range-separated hybrid functionals perform better than the global hybris for BH9 barrier heights and reaction energies. Except for the PBE-based range-separated nonempirical double hybrids, the exchange term's range separation helps improve the performance for barrier heights and reaction energies. The sixteen-parameter Berkeley double hybrid, ωB97M(2), performs remarkably well for both properties. However, our minimally empirical range-separated double hybrid functionals offer marginally better accuracy than ωB97M(2) for BH9 barrier heights and reaction energies.
△ Less
Submitted 28 July, 2022; v1 submitted 6 June, 2022;
originally announced June 2022.