-
Fluorescence Imaging of Individual Ions and Molecules in Pressurized Noble Gases for Barium Tagging in $^{136}$Xe
Authors:
NEXT Collaboration,
N. Byrnes,
E. Dey,
F. W. Foss,
B. J. P. Jones,
R. Madigan,
A. McDonald,
R. L. Miller,
K. E. Navarro,
L. R. Norman,
D. R. Nygren,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
J. E. Barcelon,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa
, et al. (90 additional authors not shown)
Abstract:
The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at t…
▽ More
The imaging of individual Ba$^{2+}$ ions in high pressure xenon gas is one possible way to attain background-free sensitivity to neutrinoless double beta decay and hence establish the Majorana nature of the neutrino. In this paper we demonstrate selective single Ba$^{2+}$ ion imaging inside a high-pressure xenon gas environment. Ba$^{2+}$ ions chelated with molecular chemosensors are resolved at the gas-solid interface using a diffraction-limited imaging system with scan area of 1$\times$1~cm$^2$ located inside 10~bar of xenon gas. This new form of microscopy represents an important enabling step in the development of barium tagging for neutrinoless double beta decay searches in $^{136}$Xe, as well as a new tool for studying the photophysics of fluorescent molecules and chemosensors at the solid-gas interface.
△ Less
Submitted 20 May, 2024;
originally announced June 2024.
-
Measurement of Energy Resolution with the NEXT-White Silicon Photomultipliers
Authors:
T. Contreras,
B. Palmeiro,
H. Almazán,
A. Para,
G. Martínez-Lema,
R. Guenette,
C. Adams,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel,
A. Castillo
, et al. (85 additional authors not shown)
Abstract:
The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand th…
▽ More
The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}\text{Kr}$ data from the NEXT-White detector to measure and understand the energy resolution that can be obtained with the SiPMs, rather than with PMTs. The energy resolution obtained of (10.9 $\pm$ 0.6) $\%$, full-width half-maximum, is slightly larger than predicted based on the photon statistics resulting from very low light detection coverage of the SiPM plane in the NEXT-White detector. The difference in the predicted and measured resolution is attributed to poor corrections, which are expected to be improved with larger statistics. Furthermore, the noise of the SiPMs is shown to not be a dominant factor in the energy resolution and may be negligible when noise subtraction is applied appropriately, for high-energy events or larger SiPM coverage detectors. These results, which are extrapolated to estimate the response of large coverage SiPM planes, are promising for the development of future, SiPM-only, readout planes that can offer imaging and achieve similar energy resolution to that previously demonstrated with PMTs.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
High Dynamic Range Scanning Tunneling Microscopy
Authors:
Ajla Karić,
Carolina A Marques,
Fabian Donat Natterer
Abstract:
We increase the dynamical range of a scanning tunneling microscope (STM) by actively subtracting dominant current-harmonics generated by nonlinearities in the current-voltage characteristics that could saturate the current preamplifier at low junction impedances or high gains. The strict phase relationship between a cosinusoidal excitation voltage and the current-harmonics allows excellent cancell…
▽ More
We increase the dynamical range of a scanning tunneling microscope (STM) by actively subtracting dominant current-harmonics generated by nonlinearities in the current-voltage characteristics that could saturate the current preamplifier at low junction impedances or high gains. The strict phase relationship between a cosinusoidal excitation voltage and the current-harmonics allows excellent cancellation using the displacement-current of a driven compensating capacitor placed at the input of the preamplifier. Removal of DC currents has no effect on, and removal of the first harmonic only leads to a rigid shift in conductivity that can be numerically reversed by adding the known removal current. Our method requires no permanent change of the hardware but only two phase synchronized voltage sources and a multi-frequency lock-in amplifier to enable high dynamic range spectroscopy and imaging.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
The Compton scientific mission in Brazil in 1941: a perspective from national newspaper and documents of the time
Authors:
Francisco Caruso,
Adílio Marques,
Felipe Silveira
Abstract:
Starting from the perspective of reports published in Brazilian newspapers at the time, as well as letters exchanged between scientists who worked in Brazil and North American colleagues and documents from the symposium on cosmic rays, a chronological sequence of how the so-called Compton mission in Brazil took place and was perceived by the literate public will be presented.
Starting from the perspective of reports published in Brazilian newspapers at the time, as well as letters exchanged between scientists who worked in Brazil and North American colleagues and documents from the symposium on cosmic rays, a chronological sequence of how the so-called Compton mission in Brazil took place and was perceived by the literate public will be presented.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Design, characterization and installation of the NEXT-100 cathode and electroluminescence regions
Authors:
NEXT Collaboration,
K. Mistry,
L. Rogers,
B. J. P. Jones,
B. Munson,
L. Norman,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel
, et al. (85 additional authors not shown)
Abstract:
NEXT-100 is currently being constructed at the Laboratorio Subterráneo de Canfranc in the Spanish Pyrenees and will search for neutrinoless double beta decay using a high-pressure gaseous time projection chamber (TPC) with 100 kg of xenon. Charge amplification is carried out via electroluminescence (EL) which is the process of accelerating electrons in a high electric field region causing secondar…
▽ More
NEXT-100 is currently being constructed at the Laboratorio Subterráneo de Canfranc in the Spanish Pyrenees and will search for neutrinoless double beta decay using a high-pressure gaseous time projection chamber (TPC) with 100 kg of xenon. Charge amplification is carried out via electroluminescence (EL) which is the process of accelerating electrons in a high electric field region causing secondary scintillation of the medium proportional to the initial charge. The NEXT-100 EL and cathode regions are made from tensioned hexagonal meshes of 1 m diameter. This paper describes the design, characterization, and installation of these parts for NEXT-100. Simulations of the electric field are performed to model the drift and amplification of ionization electrons produced in the detector under various EL region alignments and rotations. Measurements of the electrostatic breakdown voltage in air characterize performance under high voltage conditions and identify breakdown points. The electrostatic deflection of the mesh is quantified and fit to a first-principles mechanical model. Measurements were performed with both a standalone test EL region and with the NEXT-100 EL region before its installation in the detector. Finally, we describe the parts as installed in NEXT-100, following their deployment in Summer 2023.
△ Less
Submitted 21 December, 2023; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Demonstration of Event Position Reconstruction based on Diffusion in the NEXT-White Detector
Authors:
J. Haefner,
K. E. Navarro,
R. Guenette,
B. J. P. Jones,
A. Tripathi,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. BenllochRodríguez,
F. I. G. M. Borges,
A. Brodolin,
N. Byrnes,
S. Cárcel,
J. V. Carrión
, et al. (86 additional authors not shown)
Abstract:
Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the dr…
▽ More
Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the drift direction. In this paper, alternate methods for assigning event drift distance via quantification of electron diffusion in a pure high pressure xenon gas time projection chamber are explored. Data from the NEXT-White detector demonstrate the ability to achieve good position assignment accuracy for both high- and low-energy events. Using point-like energy deposits from $^{83\mathrm{m}}$Kr calibration electron captures ($E\sim45$keV), the position of origin of low-energy events is determined to $2~$cm precision with bias $< 1$mm. A convolutional neural network approach is then used to quantify diffusion for longer tracks (E$\geq$1.5MeV), yielding a precision of 3cm on the event barycenter. The precision achieved with these methods indicates the feasibility energy calibrations of better than 1% FWHM at Q$_{ββ}$ in pure xenon, as well as the potential for event fiducialization in large future detectors using an alternate method that does not rely on primary scintillation.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Two-Dimensional Noble Metal Chalcogenides in the Frustrated Snub-Square Lattice
Authors:
Hai-Chen Wang,
Ahmad W. Huran,
Miguel A. L. Marques,
Muralidhar Nalabothula,
Ludger Wirtz,
Zachary Romestan,
Aldo H. Romero
Abstract:
We study two-dimensional noble metal chalcogenides, with composition {Cu, Ag, Au}2{S, Se, Te}, crystallizing in a snub-square lattice. This is a semi-regular two-dimensional tesselation formed by triangles and squares that exhibits geometrical frustration. We use for comparison a square lattice, from which the snub-square tiling can be derived by a simple rotation of the squares. The mono-layer sn…
▽ More
We study two-dimensional noble metal chalcogenides, with composition {Cu, Ag, Au}2{S, Se, Te}, crystallizing in a snub-square lattice. This is a semi-regular two-dimensional tesselation formed by triangles and squares that exhibits geometrical frustration. We use for comparison a square lattice, from which the snub-square tiling can be derived by a simple rotation of the squares. The mono-layer snub-square chalcogenides are very close to thermodynamic stability, with the most stable system (Ag2Se) a mere 7 meV/atom above the convex hull of stability. All compounds studied in the square and snub-square lattice are semiconductors, with band gaps ranging from 0.1 to more than 2.5 eV. Excitonic effects are strong, with an exciton binding energy of around 0.3 eV. We propose the Cu (001) surface as a possible substrate to synthesize Cu2Se, although many other metal and semiconducting surfaces can be found with very good lattice matching.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks
Authors:
Pedro Afonso Marques,
Samuel Ahizi,
Miguel Alfonso Mendez
Abstract:
The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance b…
▽ More
The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance between three control volumes (the ullage vapor, the liquid, and the solid tank) with an Artificial Neural Network (ANN) for predicting the heat transfer coefficients from the current tank state. The proposed approach combines ideas from traditional data assimilation and multi-environment reinforcement learning, where an agent's training (model assimilation) is carried out simultaneously on multiple environments (systems). The real-time assimilation uses a mini-batch version of the Limited-memory Broyden-Fletcher-Goldfarb-Shanno with bounds (L-BFGS-B) and adjoint-based gradient computation for solving the underlying optimization problem. The approach is tested on synthetic datasets simulating multiple tanks undergoing different operation phases (pressurization, hold, long-term storage, and sloshing). The results show that the assimilation is robust against measurement noise and uses it to explore the parameter space further. Moreover, we show that sampling from multiple environments simultaneously accelerates the assimilation.
△ Less
Submitted 20 October, 2023; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Topological $n$-root Su-Schrieffer-Heeger model in a non-Hermitian photonic ring system
Authors:
David Viedma,
Anselmo M. Marques,
Ricardo G. Dias,
Verònica Ahufinger
Abstract:
Square-root topology is one of the newest additions to the ever expanding field of topological insulators (TIs). It characterizes systems that relate to their parent TI through the squaring of their Hamiltonians. Extensions to $2^n$-root topology, where $n$ is the number of squaring operations involved in retrieving the parent TI, were quick to follow. Here, we go one step further and develop the…
▽ More
Square-root topology is one of the newest additions to the ever expanding field of topological insulators (TIs). It characterizes systems that relate to their parent TI through the squaring of their Hamiltonians. Extensions to $2^n$-root topology, where $n$ is the number of squaring operations involved in retrieving the parent TI, were quick to follow. Here, we go one step further and develop the framework for designing general $n$-root TIs, with $n$ any positive integer, using the Su-Schrieffer-Heeger (SSH) model as the parent TI from which the higher-root versions are constructed. The method relies on using loops of unidirectional couplings as building blocks, such that the resulting model is non-Hermitian and embedded with a generalized chiral symmetry. Edge states are observed at the $n$ branches of the complex energy spectrum, appearing within what we designate as a ring gap, shown to be irreducible to the usual point or line gaps. We further detail on how such an $n$-root model can be realistically implemented in photonic ring systems. Near perfect unidirectional effective couplings between the main rings can be generated via mediating auxiliary rings with modulated gains and losses. These induce high imaginary gauge fields that strongly supress couplings in one direction, while enhancing them in the other. We use these photonic lattices to validate and benchmark the analytical predictions. Our results introduce a new class of high-root topological models, as well as a route for their experimental realization.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Reproducibility of density functional approximations: how new functionals should be reported
Authors:
Susi Lehtola,
Miguel A. L. Marques
Abstract:
Density functional theory is the workhorse of chemistry and materials science, and novel density functional approximations (DFAs) are published every year. To become available in program packages, the novel DFAs need to be (re)implemented. However, according to our experience as developers of Libxc [Lehtola et al, SoftwareX 7, 1 (2018)], a constant problem in this task is verification, due to the…
▽ More
Density functional theory is the workhorse of chemistry and materials science, and novel density functional approximations (DFAs) are published every year. To become available in program packages, the novel DFAs need to be (re)implemented. However, according to our experience as developers of Libxc [Lehtola et al, SoftwareX 7, 1 (2018)], a constant problem in this task is verification, due to the lack of reliable reference data. As we discuss in this work, this lack has lead to several non-equivalent implementations of functionals such as BP86, PW91, PBE, and B3LYP across various program packages, yielding different total energies. Through careful verification, we have also found many issues with incorrect functional forms in recent DFAs.
The goal of this work is to ensure the reproducibility of DFAs: DFAs must be verifiable in order to prevent reappearances of the abovementioned errors and incompatibilities. A common framework for verification and testing is therefore needed. We suggest several ways in which reference energies can be produced with free and open source software, either with non-self-consistent calculations with tabulated atomic densities or via self-consistent calculations with various program packages. The employed numerical parameters -- especially, the quadrature grid -- need to be converged to guarantee a $\lesssim0.1μE_{h}$ precision in the total energy, which is nowadays routinely achievable in fully numerical calculations. Moreover, as such sub-$μE_{h}$ level agreement can only be achieved when fully equivalent implementations of the DFA are used, also the source code of the reference implementation should be made available in any publication describing a new DFA.
△ Less
Submitted 23 August, 2023; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Demonstration of neutrinoless double beta decay searches in gaseous xenon with NEXT
Authors:
NEXT Collaboration,
P. Novella,
M. Sorel,
A. Usón,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
M. del Barrio-Torregrosa,
A. Bayo,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
S. Bounasser,
N. Byrnes,
S. Cárcel,
J. V. Carrión,
S. Cebrián
, et al. (90 additional authors not shown)
Abstract:
The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in $^{136}$Xe, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterráneo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means o…
▽ More
The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in $^{136}$Xe, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterráneo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means of the topology of the reconstructed tracks, NEXT-White has been exploited beyond its original goals in order to perform a neutrinoless double beta decay search. The analysis considers the combination of 271.6 days of $^{136}$Xe-enriched data and 208.9 days of $^{136}$Xe-depleted data. A detailed background modeling and measurement has been developed, ensuring the time stability of the radiogenic and cosmogenic contributions across both data samples. Limits to the neutrinoless mode are obtained in two alternative analyses: a background-model-dependent approach and a novel direct background-subtraction technique, offering results with small dependence on the background model assumptions. With a fiducial mass of only 3.50$\pm$0.01 kg of $^{136}$Xe-enriched xenon, 90% C.L. lower limits to the neutrinoless double beta decay are found in the T$_{1/2}^{0ν}>5.5\times10^{23}-1.3\times10^{24}$ yr range, depending on the method. The presented techniques stand as a proof-of-concept for the searches to be implemented with larger NEXT detectors.
△ Less
Submitted 22 September, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
NEXT-CRAB-0: A High Pressure Gaseous Xenon Time Projection Chamber with a Direct VUV Camera Based Readout
Authors:
NEXT Collaboration,
N. K. Byrnes,
I. Parmaksiz,
C. Adams,
J. Asaadi,
J Baeza-Rubio,
K. Bailey,
E. Church,
D. González-Díaz,
A. Higley,
B. J. P. Jones,
K. Mistry,
I. A. Moya,
D. R. Nygren,
P. Oyedele,
L. Rogers,
K. Stogsdill,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
S. Ayet,
C. D. R. Azevedo
, et al. (94 additional authors not shown)
Abstract:
The search for neutrinoless double beta decay ($0νββ$) remains one of the most compelling experimental avenues for the discovery in the neutrino sector. Electroluminescent gas-phase time projection chambers are well suited to $0νββ$ searches due to their intrinsically precise energy resolution and topological event identification capabilities. Scalability to ton- and multi-ton masses requires read…
▽ More
The search for neutrinoless double beta decay ($0νββ$) remains one of the most compelling experimental avenues for the discovery in the neutrino sector. Electroluminescent gas-phase time projection chambers are well suited to $0νββ$ searches due to their intrinsically precise energy resolution and topological event identification capabilities. Scalability to ton- and multi-ton masses requires readout of large-area electroluminescent regions with fine spatial resolution, low radiogenic backgrounds, and a scalable data acquisition system. This paper presents a detector prototype that records event topology in an electroluminescent xenon gas TPC via VUV image-intensified cameras. This enables an extendable readout of large tracking planes with commercial devices that reside almost entirely outside of the active medium.Following further development in intermediate scale demonstrators, this technique may represent a novel and enlargeable method for topological event imaging in $0νββ$.
△ Less
Submitted 3 August, 2023; v1 submitted 12 April, 2023;
originally announced April 2023.
-
A Compact Dication Source for Ba$^{2+}$ Tagging and Heavy Metal Ion Sensor Development
Authors:
K. E. Navarro,
B. J. P. Jones,
J. Baeza-Rubio,
M. Boyd,
A. A. Denisenko,
F. W. Foss,
S. Giri,
R. Miller,
D. R. Nygren,
M. R. Tiscareno,
F. J. Samaniego,
K. Stogsdill,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges
, et al. (85 additional authors not shown)
Abstract:
We present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization, followed by acceleration into a sensing region. Controllability of the ionic charge state is achieved through tuning of electrode potentials that influence the…
▽ More
We present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization, followed by acceleration into a sensing region. Controllability of the ionic charge state is achieved through tuning of electrode potentials that influence the retention time in the ionization region. Barium, lead, and cobalt samples have been used to test the system, with ion currents identified and quantified using a quadrupole mass analyzer. Realization of a clean $\mathrm{Ba^{2+}}$ ion beam within a bench-top system represents an important technical advance toward the development and characterization of barium tagging systems for neutrinoless double beta decay searches in xenon gas. This system also provides a testbed for investigation of novel ion sensing methodologies for environmental assay applications, with dication beams of Pb$^{2+}$ and Cd$^{2+}$ also demonstrated for this purpose.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Reflectance and fluorescence characteristics of PTFE coated with TPB at visible, UV, and VUV as a function of thickness
Authors:
J. Haefner,
A. Fahs,
J. Ho,
C. Stanford,
R. Guenette,
C. Adams,
H. Almazán,
V. Álvarez,
B. Aparicio,
A. I. Aranburu,
L. Arazi,
I. J. Arnquist,
F. Auria-Luna,
S. Ayet,
C. D. R. Azevedo,
K. Bailey,
F. Ballester,
J. M. Benlloch-Rodríguez,
F. I. G. M. Borges,
S. Bounasser,
N. Byrnes,
S. Cárcel,
J. V. Carrión,
S. Cebrián,
E. Church
, et al. (78 additional authors not shown)
Abstract:
Polytetrafluoroethylene (PTFE) is an excellent diffuse reflector widely used in light collection systems for particle physics experiments. In noble element systems, it is often coated with tetraphenyl butadiene (TPB) to allow detection of vacuum ultraviolet scintillation light. In this work this dependence is investigated for PTFE coated with TPB in air for light of wavelengths of 200~nm, 260~nm,…
▽ More
Polytetrafluoroethylene (PTFE) is an excellent diffuse reflector widely used in light collection systems for particle physics experiments. In noble element systems, it is often coated with tetraphenyl butadiene (TPB) to allow detection of vacuum ultraviolet scintillation light. In this work this dependence is investigated for PTFE coated with TPB in air for light of wavelengths of 200~nm, 260~nm, and 450~nm. The results show that TPB-coated PTFE has a reflectance of approximately 92\% for thicknesses ranging from 5~mm to 10~mm at 450~nm, with negligible variation as a function of thickness within this range. A cross-check of these results using an argon chamber supports the conclusion that the change in thickness from 5~mm to 10~mm does not affect significantly the light response at 128~nm. Our results indicate that pieces of TPB-coated PTFE thinner than the typical 10~mm can be used in particle physics detectors without compromising the light signal.
△ Less
Submitted 10 January, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
MAGAL Constellation -- Using a Small Satellite Altimeter Constellation to Monitor Local and Regional Ocean and Inland Water Variations
Authors:
André G. C. Guerra,
André João,
Miguel Arantes,
Miguel Martin,
Paulo Figueiredo,
Alexander Costa,
Catarina M. Cecilio,
Inês Castelão,
Clara Lázaro,
Joana Fernandes,
A. Marques,
K. Brandão,
P. Lima,
Yaroslav Mashtakov,
Anna Guerman,
Catharina Pieper,
Ana Martins,
Burke O. Fort,
Timothy J. Urban,
Byron D. Tapley,
Brandon A. Jones
Abstract:
MAGAL lays the foundations for a future constellation of small satellites carrying radar altimeters aiming to improve the understanding of ocean circulation variability at local, regional, and global scales. All necessary tools will be developed, including a new small, low-power altimeter payload and a miniaturized satellite platform, grounded on the Space 4.0 industry, to be manufactured inseries…
▽ More
MAGAL lays the foundations for a future constellation of small satellites carrying radar altimeters aiming to improve the understanding of ocean circulation variability at local, regional, and global scales. All necessary tools will be developed, including a new small, low-power altimeter payload and a miniaturized satellite platform, grounded on the Space 4.0 industry, to be manufactured inseries, minimizing production, operational and launch costs. To implement a collaborative constellation, and better tackle the gaps of large radar altimeter programmes, MAGAL will use a Data Analysis Centre, based on cloud services, for storage and process of data, based on known and improved algorithms, including overlay of layers from multiple sources (e.g. meteorology and opensource data). As a constellation of six satellites, MAGAL increases the density of sea surface topography measurements, enabling more data for altimetry products, when used in synergy with other missions, in coastal areas and over mesoscale features. This results in scientific and commercial information aggregated into a single platform, displayed in various graphical interfaces, allowing overlaid correlations. MAGAL is aligned with the insights from the EU agenda for sustainable development, adding value, alongside the underlying technology development, bringing together the sea's economy and its sustainable growth.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Large-scale machine-learning-assisted exploration of the whole materials space
Authors:
Jonathan Schmidt,
Noah Hoffmann,
Hai-Chen Wang,
Pedro Borlido,
Pedro J. M. A. Carriço,
Tiago F. T. Cerqueira,
Silvana Botti,
Miguel A. L. Marques
Abstract:
Crystal-graph attention networks have emerged recently as remarkable tools for the prediction of thermodynamic stability and materials properties from unrelaxed crystal structures. Previous networks trained on two million materials exhibited, however, strong biases originating from underrepresented chemical elements and structural prototypes in the available data. We tackled this issue computing a…
▽ More
Crystal-graph attention networks have emerged recently as remarkable tools for the prediction of thermodynamic stability and materials properties from unrelaxed crystal structures. Previous networks trained on two million materials exhibited, however, strong biases originating from underrepresented chemical elements and structural prototypes in the available data. We tackled this issue computing additional data to provide better balance across both chemical and crystal-symmetry space. Crystal-graph networks trained with this new data show unprecedented generalization accuracy, and allow for reliable, accelerated exploration of the whole space of inorganic compounds. We applied this universal network to perform machine-learning assisted high-throughput materials searches including 2500 binary and ternary structure prototypes and spanning about 1 billion compounds. After validation using density-functional theory, we uncover in total 19512 additional materials on the convex hull of thermodynamic stability and ~150000 compounds with a distance of less than 50 meV/atom from the hull. Combining again machine learning and ab-initio methods, we finally evaluate the discovered materials for applications as superconductors, superhard materials, and we look for candidates with large gap deformation potentials, finding several compounds with extreme values of these properties.
△ Less
Submitted 2 October, 2022;
originally announced October 2022.
-
Many recent density functionals are numerically ill-behaved
Authors:
Susi Lehtola,
Miguel A. L. Marques
Abstract:
Most computational studies in chemistry and materials science are based on the use of density functional theory. Although the exact density functional is unknown, several density functional approximations (DFAs) offer a good balance of affordable computational cost and semi-quantitative accuracy for applications. The development of DFAs still continues on many fronts, and several new DFAs aiming f…
▽ More
Most computational studies in chemistry and materials science are based on the use of density functional theory. Although the exact density functional is unknown, several density functional approximations (DFAs) offer a good balance of affordable computational cost and semi-quantitative accuracy for applications. The development of DFAs still continues on many fronts, and several new DFAs aiming for improved accuracy are published every year. However, the numerical behavior of these DFAs is an often overlooked problem. In this work, we look at all 592 DFAs for three-dimensional systems available in Libxc 5.2.2 and examine the convergence of the density functional total energy based on tabulated atomic Hartree-Fock wave functions. We show that several recent DFAs, including the celebrated SCAN family of functionals, show impractically slow convergence with typically used numerical quadrature schemes, making these functionals unsuitable both for routine applications or high-precision studies, as thousands of radial quadrature points may be required to achieve sub-$μE_{h}$ accurate total energies for these unctionals, while standard quadrature grids like the SG-3 grid only contain $\mathcal{O}(100)$ radial quadrature points. These results are both a warning to users to lways check the sufficiency of the quadrature grid when adopting novel functionals, as well as a guideline to the theory community to develop better behaved density functionals.
△ Less
Submitted 26 September, 2022; v1 submitted 28 June, 2022;
originally announced June 2022.
-
Machine-learning correction to density-functional crystal structure optimization
Authors:
Robert Hussein,
Jonathan Schmidt,
Tomás Barros,
Miguel A. L. Marques,
Silvana Botti
Abstract:
Density functional theory is routinely applied to predict crystal structures. The most common exchange-correlation functionals used to this end are the Perdew-Burke-Ernzerhof (PBE) approximation and its variant PBEsol. We investigate the performance of these functionals for the prediction of lattice parameters and show how to enhance their accuracy using machine learning. Our dataset is constitute…
▽ More
Density functional theory is routinely applied to predict crystal structures. The most common exchange-correlation functionals used to this end are the Perdew-Burke-Ernzerhof (PBE) approximation and its variant PBEsol. We investigate the performance of these functionals for the prediction of lattice parameters and show how to enhance their accuracy using machine learning. Our dataset is constituted by experimental crystal structures of the Inorganic Crystal Structure Database matched with PBE-optmized structures stored in the materials project database. We complement these data with PBEsol calculations. We demonstrate that the accuracy and precision of PBE/PBEsol volume predictions can be noticeably improved a posteriori by employing simple, explainable machine learning models. These models can improve PBE unit cell volumes to match the accuracy of PBEsol calculations, and reduce the error of the latter with respect to experiment by 35%. Further, the error of PBE lattice constants is reduced by a factor of 3--5. A further benefit of our approach is the implicit correction of finite temperature effects without performing phonon calculations.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Detection of squawks in respiratory sounds of mechanically ventilated COVID-19 patients
Authors:
Bruno M. Rocha,
Diogo Pessoa,
Grigorios-Aris Cheimariotis,
Evangelos Kaimakamis,
Serafeim-Chrysovalantis Kotoulas,
Myrto Tzimou,
Nicos Maglaveras,
Alda Marques,
Paulo de Carvalho,
Rui Pedro Paiva
Abstract:
Mechanically ventilated patients typically exhibit abnormal respiratory sounds. Squawks are short inspiratory adventitious sounds that may occur in patients with pneumonia, such as COVID-19 patients. In this work we devised a method for squawk detection in mechanically ventilated patients by develo** algorithms for respiratory cycle estimation, squawk candidate identification, feature extraction…
▽ More
Mechanically ventilated patients typically exhibit abnormal respiratory sounds. Squawks are short inspiratory adventitious sounds that may occur in patients with pneumonia, such as COVID-19 patients. In this work we devised a method for squawk detection in mechanically ventilated patients by develo** algorithms for respiratory cycle estimation, squawk candidate identification, feature extraction, and clustering. The best classifier reached an F1 of 0.48 at the sound file level and an F1 of 0.66 at the recording session level. These preliminary results are promising, as they were obtained in noisy environments. This method will give health professionals a new feature to assess the potential deterioration of critically ill patients.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Machine learning the derivative discontinuity of density-functional theory
Authors:
Johannes Gedeon,
Jonathan Schmidt,
Matthew J. P. Hodgson,
Jack Wetherell,
Carlos L. Benavides-Riveros,
Miguel A. L. Marques
Abstract:
Machine learning is a powerful tool to design accurate, highly non-local, exchange-correlation functionals for density functional theory. So far, most of those machine learned functionals are trained for systems with an integer number of particles. As such, they are unable to reproduce some crucial and fundamental aspects, such as the explicit dependency of the functionals on the particle number o…
▽ More
Machine learning is a powerful tool to design accurate, highly non-local, exchange-correlation functionals for density functional theory. So far, most of those machine learned functionals are trained for systems with an integer number of particles. As such, they are unable to reproduce some crucial and fundamental aspects, such as the explicit dependency of the functionals on the particle number or the infamous derivative discontinuity at integer particle numbers. Here we propose a solution to these problems by training a neural network as the universal functional of density-functional theory that (i) depends explicitly on the number of particles with a piece-wise linearity between the integer numbers and (ii) reproduces the derivative discontinuity of the exchange-correlation energy. This is achieved by using an ensemble formalism, a training set containing fractional densities, and an explicitly discontinuous formulation.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Machine learning recognition of light orbital-angular-momentum superpositions
Authors:
B. Pinheiro da Silva,
B. A. D. Marques,
R. B. Rodrigues,
P. H. Souto Ribeiro,
A. Z. Khoury
Abstract:
We developed a method to characterize arbitrary superpositions of light orbital angular momentum (OAM) with high fidelity by using astigmatic tomography and machine learning processing. In order to define each superposition unequivocally, we combine two intensity measurements. The first one is the direct image of the input beam, which cannot distinguish between opposite OAM components. This ambigu…
▽ More
We developed a method to characterize arbitrary superpositions of light orbital angular momentum (OAM) with high fidelity by using astigmatic tomography and machine learning processing. In order to define each superposition unequivocally, we combine two intensity measurements. The first one is the direct image of the input beam, which cannot distinguish between opposite OAM components. This ambiguity is removed by a second image obtained after astigmatic transformation of the input beam. Samples of these image pairs are used to train a convolution neural network and achieve high fidelity recognition of arbitrary OAM superpositions with dimension up to five.
△ Less
Submitted 8 December, 2020; v1 submitted 30 November, 2020;
originally announced December 2020.
-
Raman-acoustofluidic integrated system for single-cell analysis
Authors:
Harrisson D. A. Santos,
Amanda E. Silva,
Giclênio C. Silva,
Everton B. Lima,
Alisson S. Marques,
Magna S. Alexandre-Moreira,
Aline C. Queiroz,
Carlos Jacinto,
J. Henrique Lopes,
Ueslen Rocha,
Glauber T. Silva
Abstract:
Confocal Raman microscopy offers a particular pathway for monitoring chemical "fingerprints" of intracellular components like the cell membrane, organelles, and nucleus. Nevertheless, conventional Raman acquisitions of fixed or randomly dispersed cells on a substrate, such as a microscope slide, might be severely limited for biomedical investigations. Backscattered Raman signal is likely to be ove…
▽ More
Confocal Raman microscopy offers a particular pathway for monitoring chemical "fingerprints" of intracellular components like the cell membrane, organelles, and nucleus. Nevertheless, conventional Raman acquisitions of fixed or randomly dispersed cells on a substrate, such as a microscope slide, might be severely limited for biomedical investigations. Backscattered Raman signal is likely to be overshadowed by contributions from substrate fluorescence. Also, biological assays for drug discovery, infection, and tissue engineering may require monitoring live cells individually over a time interval spanning from a few hours to a few days. To meet the needs of cell assay monitoring, we propose an acoustofluidic device that forms a levitating cell aggregation (one layer) in a cylindrical chamber of 10 μL volume that operates at 1 MHz frequency. The integrated system comprises a lab-on-a-chip device and a confocal Raman microscope. In this setup, a cell can be selectively Raman-investigated with micrometre accuracy, without any substrate interference. Based on a set of carefully designed experiments, we demonstrate that polystyrene microparticles are assembled and held standstill, enabling a full Raman spectrum to be taken of a single particle in less than a minute. The signal-to-background ratio is improved by a thousandfold when compared with conventional Raman acquisition. The Raman-acoustofluidic system is showcased for obtaining the spectrum of a single cell among an enriched population of macrophages of mice. The obtained results confirm the method's robustness for applications in single-cell analysis.
△ Less
Submitted 15 November, 2020;
originally announced November 2020.
-
Electrically charged localized structures
Authors:
D. Bazeia,
M. A. Marques,
R. Menezes
Abstract:
This work deals with an Abelian gauge field in the presence of an electric charge immersed in a medium controlled by neutral scalar fields, which interact with the gauge field through a generalized dielectric function. We develop an interesting procedure to solve the equations of motion, which is based on the minimization of the energy, leading us to a first order framework where minimum energy so…
▽ More
This work deals with an Abelian gauge field in the presence of an electric charge immersed in a medium controlled by neutral scalar fields, which interact with the gauge field through a generalized dielectric function. We develop an interesting procedure to solve the equations of motion, which is based on the minimization of the energy, leading us to a first order framework where minimum energy solutions of first order differential equations solve the equations of motion. We investigate two distinct models in two and three spatial dimensions and illustrate the general results with some examples of current interest, implementing a simple way to solve the problem with analytical solutions that engender internal structure.
△ Less
Submitted 17 December, 2020; v1 submitted 27 October, 2020;
originally announced November 2020.
-
Meta-local density functionals: a new rung on Jacob's ladder
Authors:
Susi Lehtola,
Miguel A. L. Marques
Abstract:
The homogeneous electron gas (HEG) is a key ingredient in the construction of most exchange-correlation functionals of density-functional theory. Often, the energy of the HEG is parameterized as a function of its spin density $n$, leading to the local density approximation (LDA) for inhomogeneous systems. However, the connection between the electron density and kinetic energy density of the HEG ca…
▽ More
The homogeneous electron gas (HEG) is a key ingredient in the construction of most exchange-correlation functionals of density-functional theory. Often, the energy of the HEG is parameterized as a function of its spin density $n$, leading to the local density approximation (LDA) for inhomogeneous systems. However, the connection between the electron density and kinetic energy density of the HEG can be used to generalize the LDA by evaluating it on a weighted geometric average of the local spin density and the spin density of a HEG that has the local kinetic energy density of the inhomogeneous system, with a mixing ratio $x$. This leads to a new family of functionals that we term meta-local density approximations (meta-LDAs), which are still exact for the HEG, which are derived only from properties of the HEG, and which form a new rung of Jacob's ladder of density functionals. The first functional of this ladder, the local $τ$ approximation (LTA) of Ernzerhof and Scuseria that corresponds to $x=1$ is unfortunately not stable enough to be used in self-consistent field calculations, because it leads to divergent potentials as we show in this work. However, a geometric averaging of the LDA and LTA densities with smaller values of $x$ not only leads to numerical stability of the resulting functional, but also yields more accurate exchange energies in atomic calculations than the LDA, the LTA, or the tLDA functional ($x=1/4$) of Eich and Hellgren. We choose $x=0.50$ as it gives the best total energy in self-consistent exchange-only calculations for the argon atom. Atomization energy benchmarks confirm that the choice $x=0.50$ also yields improved energetics in combination with correlation functionals in molecules, almost eliminating the well-known overbinding of the LDA and reducing its error by two thirds.
△ Less
Submitted 14 January, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Nonlinear interaction of acoustic waves with a spheroidal particle: radiation force and torque effects
Authors:
Everton B. Lima,
JosE P. Leao-Neto,
Alisson S. Marques,
Giclenio C. Silva,
Jose H. Lopes,
Glauber T. Silva
Abstract:
The nonlinear interaction of a time-harmonic acoustic wave with an anisotropic particle gives rise to the radiation force and torque effects. These phenomena are at the heart of the acoustofluidics technology, where microparticles such as cells and microorganisms are acoustically manipulated. We present a theoretical model considering a generic acoustic beam interacting with a subwavelength sphero…
▽ More
The nonlinear interaction of a time-harmonic acoustic wave with an anisotropic particle gives rise to the radiation force and torque effects. These phenomena are at the heart of the acoustofluidics technology, where microparticles such as cells and microorganisms are acoustically manipulated. We present a theoretical model considering a generic acoustic beam interacting with a subwavelength spheroidal particle in a nonviscous fluid. Concise analytical expressions of the radiation force and torque are obtained in the scattering dipole approximation. The radiation force is given in terms of a gradient and scattering force; while the radiation torque has two fundamental contributions, namely, the momentum arm and acoustic spin (spin-torque effect). As a practical example, we use the theory to describe the interaction of two crossed plane waves and a prolate spheroidal particle. The results reveal the particle is transversely trapped in a pressure node and is axially pushed by the radiation force. Also, the momentum arm aligns the particle in the axial direction. At certain specific positions, only the spin-torque occurs. Our findings are remarkably consistent with finite-element simulations. The success of our model enables its use as an investigation tool for the manipulation of anisotropic microparticles in acoustofluidics.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Iodine molecule modifications with high pressure
Authors:
**gming Shi,
Emiliano Fonda,
Silvana Botti,
Miguel A. L. Marques,
Toru Shinmei,
Tetsuo Irifune,
Anne-Marie Flank,
Pierre Lagarde,
Alain Polian,
Jean-Paul Itié,
Alfonso San-Miguel
Abstract:
Metallization and dissociation are key transformations in diatomic molecules at high densities particularly significant for modeling giant planets. Using X-ray absorption spectroscopy and atomistic modeling, we demonstrate that in halogens, the formation of a \textit{connected} molecular structure takes place at pressures well below metallization. Here we show that the iodine diatomic molecule fir…
▽ More
Metallization and dissociation are key transformations in diatomic molecules at high densities particularly significant for modeling giant planets. Using X-ray absorption spectroscopy and atomistic modeling, we demonstrate that in halogens, the formation of a \textit{connected} molecular structure takes place at pressures well below metallization. Here we show that the iodine diatomic molecule first elongates of $\sim$0.007 Å~up to a critical pressure of $P_c$ $\backsim$7~GPa develo** bonds between molecules. Then its length continuously decreases with pressure up to 15-20~GPa. Universal trends in halogens are shown and allow to predict for chlorine a pressure of 42$\pm$8~GPa for molecular bond-length reversal. Our findings tackle the molecule invariability paradigm in diatomic molecular phases at high pressures and may be generalized to other abundant diatomic molecules in the universe, including hydrogen.
△ Less
Submitted 11 September, 2020; v1 submitted 16 April, 2020;
originally announced April 2020.
-
Octopus, a computational framework for exploring light-driven phenomena and quantum dynamics in extended and finite systems
Authors:
Nicolas Tancogne-Dejean,
Micael J. T. Oliveira,
Xavier Andrade,
Heiko Appel,
Carlos H. Borca,
Guillaume Le Breton,
Florian Buchholz,
Alberto Castro,
Stefano Corni,
Alfredo A. Correa,
Umberto De Giovannini,
Alain Delgado,
Florian G. Eich,
Johannes Flick,
Gabriel Gil,
Adrián Gomez,
Nicole Helbig,
Hannes Hübener,
René Jestädt,
Joaquim Jornet-Somoza,
Ask H. Larsen,
Irina V. Lebedeva,
Martin Lüders,
Miguel A. L. Marques,
Sebastian T. Ohlmann
, et al. (9 additional authors not shown)
Abstract:
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a…
▽ More
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, providing an unique framework allowing to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory framework. The present article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, like the new theoretical framework of quantum electrodynamics density-functional formalism (QEDFT) for the description of novel light-matter hybrid states. Those advances, and other being released soon as part of the Octopus package, will enable the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (QED-materials).
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
mfEGRA: Multifidelity Efficient Global Reliability Analysis through Active Learning for Failure Boundary Location
Authors:
Anirban Chaudhuri,
Alexandre N. Marques,
Karen E. Willcox
Abstract:
This paper develops mfEGRA, a multifidelity active learning method using data-driven adaptively refined surrogates for failure boundary location in reliability analysis. This work addresses the issue of prohibitive cost of reliability analysis using Monte Carlo sampling for expensive-to-evaluate high-fidelity models by using cheaper-to-evaluate approximations of the high-fidelity model. The method…
▽ More
This paper develops mfEGRA, a multifidelity active learning method using data-driven adaptively refined surrogates for failure boundary location in reliability analysis. This work addresses the issue of prohibitive cost of reliability analysis using Monte Carlo sampling for expensive-to-evaluate high-fidelity models by using cheaper-to-evaluate approximations of the high-fidelity model. The method builds on the Efficient Global Reliability Analysis (EGRA) method, which is a surrogate-based method that uses adaptive sampling for refining Gaussian process surrogates for failure boundary location using a single-fidelity model. Our method introduces a two-stage adaptive sampling criterion that uses a multifidelity Gaussian process surrogate to leverage multiple information sources with different fidelities. The method combines expected feasibility criterion from EGRA with one-step lookahead information gain to refine the surrogate around the failure boundary. The computational savings from mfEGRA depends on the discrepancy between the different models, and the relative cost of evaluating the different models as compared to the high-fidelity model. We show that accurate estimation of reliability using mfEGRA leads to computational savings of $\sim$46% for an analytic multimodal test problem and 24% for a three-dimensional acoustic horn problem, when compared to single-fidelity EGRA. We also show the effect of using a priori drawn Monte Carlo samples in the implementation for the acoustic horn problem, where mfEGRA leads to computational savings of 45% for the three-dimensional case and 48% for a rarer event four-dimensional case as compared to single-fidelity EGRA.
△ Less
Submitted 23 September, 2021; v1 submitted 6 October, 2019;
originally announced October 2019.
-
Machine Learning the Physical Non-Local Exchange-Correlation Functional of Density-Functional Theory
Authors:
Jonathan Schmidt,
Carlos L. Benavides-Riveros,
Miguel A. L. Marques
Abstract:
We train a neural network as the universal exchange-correlation functional of density-functional theory that simultaneously reproduces both the exact exchange-correlation energy and potential. This functional is extremely non-local, but retains the computational scaling of traditional local or semi-local approximations. It therefore holds the promise of solving some of the delocalization problems…
▽ More
We train a neural network as the universal exchange-correlation functional of density-functional theory that simultaneously reproduces both the exact exchange-correlation energy and potential. This functional is extremely non-local, but retains the computational scaling of traditional local or semi-local approximations. It therefore holds the promise of solving some of the delocalization problems that plague density-functional theory, while maintaining the computational efficiency that characterizes the Kohn-Sham equations. Furthermore, by using automatic differentiation, a capability present in modern machine-learning frameworks, we impose the exact mathematical relation between the exchange-correlation energy and the potential, leading to a fully consistent method. We demonstrate the feasibility of our approach by looking at one-dimensional systems with two strongly-correlated electrons, where density-functional methods are known to fail, and investigate the behavior and performance of our functional by varying the degree of non-locality.
△ Less
Submitted 7 October, 2019; v1 submitted 16 August, 2019;
originally announced August 2019.
-
Bimagnetic Monopoles
Authors:
D. Bazeia,
M. A. Marques,
R. Menezes
Abstract:
Motivated by recent results on small and hollow magnetic monopoles and on core and shell bimagnetic nanoparticles, we propose the construction of bimagnetic monopoles, which are structures that accommodate a magnetic monopole inside another magnetic monopole.
Motivated by recent results on small and hollow magnetic monopoles and on core and shell bimagnetic nanoparticles, we propose the construction of bimagnetic monopoles, which are structures that accommodate a magnetic monopole inside another magnetic monopole.
△ Less
Submitted 22 August, 2018; v1 submitted 25 July, 2018;
originally announced August 2018.
-
Topological edge states and Aharanov-Bohm caging with ultracold atoms carrying orbital angular momentum
Authors:
G. Pelegrí,
A. M. Marques,
R. G. Dias,
A. J. Daley,
J. Mompart,
V. Ahufinger
Abstract:
We show that bosonic atoms loaded into orbital angular momentum $l=1$ states of a lattice in a diamond-chain geometry provides a flexible and simple platform for exploring a range of topological effects. This system exhibits robust edge states, and the relative phases arising naturally in the tunnelling amplitudes lead to the appearance of Aharanov-Bohm caging in the lattice. We discuss how these…
▽ More
We show that bosonic atoms loaded into orbital angular momentum $l=1$ states of a lattice in a diamond-chain geometry provides a flexible and simple platform for exploring a range of topological effects. This system exhibits robust edge states, and the relative phases arising naturally in the tunnelling amplitudes lead to the appearance of Aharanov-Bohm caging in the lattice. We discuss how these properties can be realised and observed in ongoing experiments.
△ Less
Submitted 21 July, 2018;
originally announced July 2018.
-
Topological edge states with ultracold atoms carrying orbital angular momentum in a diamond chain
Authors:
G. Pelegrí,
A. M. Marques,
R. G. Dias,
A. J. Daley,
V. Ahufinger,
J. Mompart
Abstract:
We study the single-particle properties of a system formed by ultracold atoms loaded into the manifold of $l=1$ Orbital Angular Momentum (OAM) states of an optical lattice with a diamond chain geometry. Through a series of successive basis rotations, we show that the OAM degree of freedom induces phases in some tunneling amplitudes of the tight-binding model that are equivalent to a net $π$ flux t…
▽ More
We study the single-particle properties of a system formed by ultracold atoms loaded into the manifold of $l=1$ Orbital Angular Momentum (OAM) states of an optical lattice with a diamond chain geometry. Through a series of successive basis rotations, we show that the OAM degree of freedom induces phases in some tunneling amplitudes of the tight-binding model that are equivalent to a net $π$ flux through the plaquettes and give rise to a topologically non-trivial band structure and protected edge states. In addition, we demonstrate that quantum interferences between the different tunneling processes involved in the dynamics may lead to Aharanov-Bohm caging in the system. All these analytical results are confirmed by exact diagonalization numerical calculations.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Contour location via entropy reduction leveraging multiple information sources
Authors:
Alexandre N. Marques,
Remi R. Lam,
Karen E. Willcox
Abstract:
We introduce an algorithm to locate contours of functions that are expensive to evaluate. The problem of locating contours arises in many applications, including classification, constrained optimization, and performance analysis of mechanical and dynamical systems (reliability, probability of failure, stability, etc.). Our algorithm locates contours using information from multiple sources, which a…
▽ More
We introduce an algorithm to locate contours of functions that are expensive to evaluate. The problem of locating contours arises in many applications, including classification, constrained optimization, and performance analysis of mechanical and dynamical systems (reliability, probability of failure, stability, etc.). Our algorithm locates contours using information from multiple sources, which are available in the form of relatively inexpensive, biased, and possibly noisy approximations to the original function. Considering multiple information sources can lead to significant cost savings. We also introduce the concept of contour entropy, a formal measure of uncertainty about the location of the zero contour of a function approximated by a statistical surrogate model. Our algorithm locates contours efficiently by maximizing the reduction of contour entropy per unit cost.
△ Less
Submitted 19 December, 2018; v1 submitted 18 May, 2018;
originally announced May 2018.
-
Propagators for the time-dependent Kohn-Sham equations: multistep, Runge-Kutta, exponential Runge-Kutta, and commutator free Magnus methods
Authors:
Adrián Gómez Pueyo,
Miguel A. L. Marques,
Angel Rubio,
Alberto Castro
Abstract:
We examine various integration schemes for the time-dependent Kohn-Sham equations. Contrary to the time-dependent Schrödinger's equation, this set of equations is non-linear, due to the dependence of the Hamiltonian on the electronic density. We discuss some of their exact properties, and in particular their symplectic structure. Four different families of propagators are considered, specifically…
▽ More
We examine various integration schemes for the time-dependent Kohn-Sham equations. Contrary to the time-dependent Schrödinger's equation, this set of equations is non-linear, due to the dependence of the Hamiltonian on the electronic density. We discuss some of their exact properties, and in particular their symplectic structure. Four different families of propagators are considered, specifically the linear multistep, Runge-Kutta, exponential Runge-Kutta, and the commutator-free Magnus schemes. These have been chosen because they have been largely ignored in the past for time-dependent electronic structure calculations. The performance is analyzed in terms of cost-versus-accuracy. The clear winner, in terms of robustness, simplicity, and efficiency is a simplified version of a fourth-order commutator-free Magnus integrator. However, in some specific cases, other propagators, such as some implicit versions of the multistep methods, may be useful.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Imposing jump conditions on nonconforming interfaces for the Correction Function Method: a least squares approach
Authors:
Alexandre Noll Marques,
Jean-Christophe Nave,
Rodolfo Ruben Rosales
Abstract:
We introduce a technique that simplifies the problem of imposing jump conditions on interfaces that are not aligned with a computational grid in the context of the Correction Function Method (CFM). The CFM offers a general framework to solve Poisson's equation in the presence of discontinuities to high order of accuracy, while using a compact discretization stencil. A key concept behind the CFM is…
▽ More
We introduce a technique that simplifies the problem of imposing jump conditions on interfaces that are not aligned with a computational grid in the context of the Correction Function Method (CFM). The CFM offers a general framework to solve Poisson's equation in the presence of discontinuities to high order of accuracy, while using a compact discretization stencil. A key concept behind the CFM is enforcing the jump conditions in a least squares sense. This concept requires computing integrals over sections of the interface, which is a challenge in 3-D when only an implicit representation of the interface is available (e.g., the zero contour of a level set function). The technique introduced here is based on a new formulation of the least squares procedure that relies only on integrals over domains that are amenable to simple quadrature after local coordinate transformations. We incorporate this technique into a fourth order accurate implementation of the CFM, and show examples of solutions to Poisson's equation computed in 2-D and 3-D.
△ Less
Submitted 10 July, 2019; v1 submitted 30 October, 2017;
originally announced October 2017.
-
Resistive switching in MoSe$_{2}$/BaTiO$_{3}$ hybrid structures
Authors:
J. P. B. Silva,
C. Almeida Marques,
J. Agostinho Moreira,
O. Conde
Abstract:
Here we study the resistive switching (RS) effect that emerges when ferroelectric BaTiO$_{3}$ (BTO) and few-layers MoSe$_{2}$ are combined in one single structure. The C-V loops reveal the ferroelectric nature of both Al/Si/SiO$_{x}$/BTO/Au and Al/Si/SiO$_{x}$/MoSe$_{2}$/BTO/Au structures and the high quality of the SiO$_{x}$/MoSe$_{2}$ interface in the Al/Si/SiOx/MoSe$_{2}$/Au structure. Al/Si/Si…
▽ More
Here we study the resistive switching (RS) effect that emerges when ferroelectric BaTiO$_{3}$ (BTO) and few-layers MoSe$_{2}$ are combined in one single structure. The C-V loops reveal the ferroelectric nature of both Al/Si/SiO$_{x}$/BTO/Au and Al/Si/SiO$_{x}$/MoSe$_{2}$/BTO/Au structures and the high quality of the SiO$_{x}$/MoSe$_{2}$ interface in the Al/Si/SiOx/MoSe$_{2}$/Au structure. Al/Si/SiO$_{x}$/MoSe$_{2}$/BTO/Au hybrid structures show the electroforming free resistive switching that is explained on the basis of the modulation of the potential distribution at the MoSe$_{2}$/BTO interface via ferroelectric polarization flip**. This structure shows promising resistive switching characteristics with switching ratio of $\approx{}$10$^{2}$ and a stable memory window, which are highly required for memory applications.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Towards a formal definition of static and dynamic electronic correlations
Authors:
Carlos L. Benavides-Riveros,
Nektarios N. Lathiotakis,
Miguel A. L. Marques
Abstract:
Some of the most spectacular failures of density-functional and Hartree-Fock theories are related to an incorrect description of the so-called static electron correlation. Motivated by recent progress on the N-representability problem of the one-body density matrix for pure states, we propose a way to quantify the static contribution to the electronic correlation. By studying several molecular sys…
▽ More
Some of the most spectacular failures of density-functional and Hartree-Fock theories are related to an incorrect description of the so-called static electron correlation. Motivated by recent progress on the N-representability problem of the one-body density matrix for pure states, we propose a way to quantify the static contribution to the electronic correlation. By studying several molecular systems we show that our proposal correlates well with our intuition of static and dynamic electron correlation. Our results bring out the paramount importance of the occupancy of the highest occupied natural spin-orbital in such quantification.
△ Less
Submitted 19 May, 2017; v1 submitted 29 April, 2017;
originally announced May 2017.
-
Relating correlation measures: the importance of the energy gap
Authors:
Carlos L. Benavides-Riveros,
Nektarios N. Lathiotakis,
Christian Schilling,
Miguel A. L. Marques
Abstract:
The concept of correlation is central to all approaches that attempt the description of many-body effects in electronic systems. Multipartite correlation is a quantum information theoretical property that is attributed to quantum states independent of the underlying physics. In quantum chemistry, however, the correlation energy (the energy not seized by the Hartree-Fock ansatz) plays a more promin…
▽ More
The concept of correlation is central to all approaches that attempt the description of many-body effects in electronic systems. Multipartite correlation is a quantum information theoretical property that is attributed to quantum states independent of the underlying physics. In quantum chemistry, however, the correlation energy (the energy not seized by the Hartree-Fock ansatz) plays a more prominent role. We show that these two different viewpoints on electron correlation are closely related. The key ingredient turns out to be the energy gap within the symmetry-adapted subspace. We then use a few-site Hubbard model and the stretched H$_2$ to illustrate this connection and to show how the corresponding measures of correlation compare.
△ Less
Submitted 26 March, 2017; v1 submitted 27 February, 2017;
originally announced February 2017.
-
Toward real-time high-fidelity simulation using integral boundary layer modeling
Authors:
Alexandre Marques,
Qiqi Wang,
Johan Larsson,
Gregory Laskowski,
Sanjeeb Bose
Abstract:
One of the greatest challenges to using large-eddy simulations (LES) in engineering applications is the large number of grid points required near walls. To mitigate this issue, researchers often couple LES with a simplified model of the flow close to the wall, known as the wall model. One feature common to most wall models is that the first few (about 3) grid points must be located below the invis…
▽ More
One of the greatest challenges to using large-eddy simulations (LES) in engineering applications is the large number of grid points required near walls. To mitigate this issue, researchers often couple LES with a simplified model of the flow close to the wall, known as the wall model. One feature common to most wall models is that the first few (about 3) grid points must be located below the inviscid log-layer, and the grid must have near-isotropic resolution near the wall. Hence, wall-modeled LES may still require a large number of grid points in both the wall-normal and span-wise directions. Because of these requirements, wall-modeled LES is still unfeasible in many applications. We present a new formulation of wall-modeled LES that is being developed to address this issue. In this formulation, LES is used to solve only for the features of the velocity field that can be adequately represented on the LES grid. The effects of the unresolved features are captured by imposing an integral balance of kinetic energy in the near-wall region. This integral energy balance translates into a dynamic partial differential equation defined on the walls, which is coupled to the LES equations. We discuss details of the new formulation and present results obtained in laminar channel flows.
△ Less
Submitted 13 November, 2016;
originally announced November 2016.
-
Optimization of the ionization time of an atom with tailored laser pulses: a theoretical study
Authors:
David Kammerlander,
Alberto Castro,
Miguel A. L. Marques
Abstract:
How fast can a laser pulse ionize an atom? We address this question by considering pulses that carry a fixed time-integrated energy per-area, and finding those that achieve the double requirement of maximizing the ionization that they induce, while having the shortest duration. We formulate this double-objective quantum optimal control problem by making use of the Pareto approach to multi-objetive…
▽ More
How fast can a laser pulse ionize an atom? We address this question by considering pulses that carry a fixed time-integrated energy per-area, and finding those that achieve the double requirement of maximizing the ionization that they induce, while having the shortest duration. We formulate this double-objective quantum optimal control problem by making use of the Pareto approach to multi-objetive optimization, and the differential evolution genetic algorithm. The goal is to find out how much a precise time-profiling of ultra-fast, large-bandwidth pulses may speed up the ionization process with respect to simple-shape pulses. We work on a simple one-dimensional model of hydrogen-like atoms (the Pöschl-Teller potential), that allows to tune the number of bound states that play a role in the ionization dynamics. We show how the detailed shape of the pulse accelerates the ionization process, and how the presence or absence of bound states influences the velocity of the process.
△ Less
Submitted 19 October, 2016;
originally announced October 2016.
-
Network Topology Inference from Spectral Templates
Authors:
Santiago Segarra,
Antonio G. Marques,
Gonzalo Mateos,
Alejandro Ribeiro
Abstract:
We address the problem of identifying a graph structure from the observation of signals defined on its nodes. Fundamentally, the unknown graph encodes direct relationships between signal elements, which we aim to recover from observable indirect relationships generated by a diffusion process on the graph. The fresh look advocated here permeates benefits from convex optimization and stationarity of…
▽ More
We address the problem of identifying a graph structure from the observation of signals defined on its nodes. Fundamentally, the unknown graph encodes direct relationships between signal elements, which we aim to recover from observable indirect relationships generated by a diffusion process on the graph. The fresh look advocated here permeates benefits from convex optimization and stationarity of graph signals, in order to identify the graph shift operator (a matrix representation of the graph) given only its eigenvectors. These spectral templates can be obtained, e.g., from the sample covariance of independent graph signals diffused on the sought network. The novel idea is to find a graph shift that, while being consistent with the provided spectral information, endows the network with certain desired properties such as sparsity. To that end we develop efficient inference algorithms stemming from provably-tight convex relaxations of natural nonconvex criteria, particularizing the results for two shifts: the adjacency matrix and the normalized Laplacian. Algorithms and theoretical recovery conditions are developed not only when the templates are perfectly known, but also when the eigenvectors are noisy or when only a subset of them are given. Numerical tests showcase the effectiveness of the proposed algorithms in recovering social, brain, and amino-acid networks.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Network Topology Identification from Spectral Templates
Authors:
Santiago Segarra,
Antonio G. Marques,
Gonzalo Mateos,
Alejandro Ribeiro
Abstract:
Network topology inference is a cornerstone problem in statistical analyses of complex systems. In this context, the fresh look advocated here permeates benefits from convex optimization and graph signal processing, to identify the so-termed graph shift operator (encoding the network topology) given only the eigenvectors of the shift. These spectral templates can be obtained, for example, from pri…
▽ More
Network topology inference is a cornerstone problem in statistical analyses of complex systems. In this context, the fresh look advocated here permeates benefits from convex optimization and graph signal processing, to identify the so-termed graph shift operator (encoding the network topology) given only the eigenvectors of the shift. These spectral templates can be obtained, for example, from principal component analysis of a set of graph signals defined on the particular network. The novel idea is to find a graph shift that while being consistent with the provided spectral information, it endows the network structure with certain desired properties such as sparsity. The focus is on develo** efficient recovery algorithms along with identifiability conditions for two particular shifts, the adjacency matrix and the normalized graph Laplacian. Application domains include network topology identification from steady-state signals generated by a diffusion process, and design of a graph filter that facilitates the distributed implementation of a prescribed linear network operator. Numerical tests showcase the effectiveness of the proposed algorithms in recovering synthetic and structural brain networks.
△ Less
Submitted 9 April, 2016;
originally announced April 2016.
-
Generalized Pauli constraints in reduced density matrix functional theory
Authors:
Iris Theophilou,
Nektarios N. Lathiotakis,
Miguel A. L. Marques,
Nicole Helbig
Abstract:
Functionals of the one-body reduced density matrix (1-RDM) are routinely minimized under Coleman's ensemble $N$-representability conditions. Recently, the topic of pure-state $N$-representability conditions, also known as generalized Pauli constraints, received increased attention following the discovery of a systematic way to derive them for any number of electrons and any finite dimensionality o…
▽ More
Functionals of the one-body reduced density matrix (1-RDM) are routinely minimized under Coleman's ensemble $N$-representability conditions. Recently, the topic of pure-state $N$-representability conditions, also known as generalized Pauli constraints, received increased attention following the discovery of a systematic way to derive them for any number of electrons and any finite dimensionality of the Hilbert space. The target of this work is to assess the potential impact of the enforcement of the pure-state conditions on the results of reduced density-matrix functional theory calculations. In particular, we examine whether the standard minimization of typical 1-RDM functionals under the ensemble $N$-representability conditions violates the pure-state conditions for prototype 3-electron systems. We also enforce the pure-state conditions, in addition to the ensemble ones, for the same systems and functionals and compare the correlation energies and optimal occupation numbers with those obtained by the enforcement of the ensemble conditions alone.
△ Less
Submitted 4 May, 2015; v1 submitted 2 March, 2015;
originally announced March 2015.
-
Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems
Authors:
Xavier Andrade,
David A. Strubbe,
Umberto De Giovannini,
Ask Hjorth Larsen,
Micael J. T. Oliveira,
Joseba Alberdi-Rodriguez,
Alejandro Varas,
Iris Theophilou,
Nicole Helbig,
Matthieu Verstraete,
Lorenzo Stella,
Fernando Nogueira,
Alán Aspuru-Guzik,
Alberto Castro,
Miguel A. L. Marques,
Ángel Rubio
Abstract:
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of…
▽ More
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrödinger equation for low-dimensionality systems.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
Sobre a viagem de Enrico Fermi ao Brasil em 1934
Authors:
Francisco Caruso,
Adílio Jorge Marques
Abstract:
Enrico Fermi was one of the greater physicists of the XX century. In 1934, he gave several lectures in Brazil. Invited by Theodoro Ramos to work in São Paulo, he preferred to stay in Rome and went to the USA in 1938. However, Fermi recommended Gleb Wataghin to come in his place. Wataghin made history in Brazil, becoming one of the first Professors of the future São Paulo University. Besides his re…
▽ More
Enrico Fermi was one of the greater physicists of the XX century. In 1934, he gave several lectures in Brazil. Invited by Theodoro Ramos to work in São Paulo, he preferred to stay in Rome and went to the USA in 1938. However, Fermi recommended Gleb Wataghin to come in his place. Wataghin made history in Brazil, becoming one of the first Professors of the future São Paulo University. Besides his relevance to the History of Science, Fermi eventually leaved an indelible mark on the creation and institutionalization of national scientific research due to the indication of Wataghin. Despite this fact, very little is known about Fermi's trip to Brazil. This work tries to reconstruct the fullest possible steps of the famous Italian physicist in our lands.
△ Less
Submitted 20 April, 2014;
originally announced April 2014.
-
Construction of the B88 exchange-energy functional in two dimensions
Authors:
J. G. Vilhena,
E. Rasanen,
M. A. L. Marques,
S. Pittalis
Abstract:
We construct a generalized-gradient approximation for the exchange-energy density of finite two-dimensional systems. Guided by non-empirical principles, we include the proper small-gradient limit and the proper tail for the exchange-hole potential. The observed performance is superior to that of the two-dimensional local-density approximation, which underlines the usefulness of the approach in pra…
▽ More
We construct a generalized-gradient approximation for the exchange-energy density of finite two-dimensional systems. Guided by non-empirical principles, we include the proper small-gradient limit and the proper tail for the exchange-hole potential. The observed performance is superior to that of the two-dimensional local-density approximation, which underlines the usefulness of the approach in practical applications.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
-
High order solution of Poisson problems with piecewise constant coefficients and interface jumps
Authors:
Alexandre Noll Marques,
Jean-Christophe Nave,
Rodolfo Ruben Rosales
Abstract:
We present a fast and accurate algorithm to solve Poisson problems in complex geometries, using regular Cartesian grids. We consider a variety of configurations, including Poisson problems with interfaces across which the solution is discontinuous (of the type arising in multi-fluid flows). The algorithm is based on a combination of the Correction Function Method (CFM) and Boundary Integral Method…
▽ More
We present a fast and accurate algorithm to solve Poisson problems in complex geometries, using regular Cartesian grids. We consider a variety of configurations, including Poisson problems with interfaces across which the solution is discontinuous (of the type arising in multi-fluid flows). The algorithm is based on a combination of the Correction Function Method (CFM) and Boundary Integral Methods (BIM). Interface and boundary conditions can be treated in a fast and accurate manner using boundary integral equations, and the associated BIM. Unfortunately, BIM can be costly when the solution is needed everywhere in a grid, e.g. fluid flow problems. We use the CFM to circumvent this issue. The solution from the BIM is used to rewrite the problem as a series of Poisson problems in rectangular domains - which requires the BIM solution at interfaces/boundaries only. These Poisson problems involve discontinuities at interfaces, of the type that the CFM can handle. Hence we use the CFM to solve them (to high order of accuracy) with finite differences and a Fast Fourier Transform based fast Poisson solver. We present 2-D examples of the algorithm applied to Poisson problems involving complex geometries, including cases in which the solution is discontinuous. We show that the algorithm produces solutions that converge with either 3rd or 4th order of accuracy, depending on the type of boundary condition and solution discontinuity.
△ Less
Submitted 15 December, 2016; v1 submitted 31 January, 2014;
originally announced January 2014.
-
Relating the spectrum of cardiac signals to the spatiotemporal dynamics of cardiac sources
Authors:
Jesús Requena-Carrión,
Ferney A. Beltrán-Molina,
Antonio G. Marques
Abstract:
An increasing number of studies use the spectrum of cardiac signals for analyzing the spatiotemporal dynamics of complex cardiac arrhythmias. However, the relationship between the spectrum of cardiac signals and the spatiotemporal dynamics of the underlying cardiac sources remains to date unclear. In this paper, we derive a mathematical expression relating the spectrum of cardiac signals to the sp…
▽ More
An increasing number of studies use the spectrum of cardiac signals for analyzing the spatiotemporal dynamics of complex cardiac arrhythmias. However, the relationship between the spectrum of cardiac signals and the spatiotemporal dynamics of the underlying cardiac sources remains to date unclear. In this paper, we derive a mathematical expression relating the spectrum of cardiac signals to the spatiotemporal dynamics of cardiac sources and the measurement characteristics of the lead systems. Then, by using analytical methods and computer simulations we analyze the spectrum of cardiac signals measured by idealized lead systems during correlated and uncorrelated spatiotemporal dynamics. Our results show that lead systems can have distorting effects on the spectral envelope of cardiac signals, which depend on the spatial resolution of the lead systems and on the degree of spatiotemporal correlation of the underlying cardiac sources. In addition to this, our results indicate that the spectral features that do not depend on the spectral envelope, such as the dominant frequency, behave robustly against different choices of lead systems.
△ Less
Submitted 11 April, 2013;
originally announced April 2013.
-
Ab-initio angle and energy resolved photoelectron spectroscopy with time-dependent density-functional theory
Authors:
U. De Giovannini,
D. Varsano,
M. A. L. Marques,
H. Appel,
E. K. U. Gross,
A. Rubio
Abstract:
We present a time-dependent density-functional method able to describe the photoelectron spectrum of atoms and molecules when excited by laser pulses. This computationally feasible scheme is based on a geometrical partitioning that efficiently gives access to photoelectron spectroscopy in time-dependent density-functional calculations. By using a geometrical approach, we provide a simple descripti…
▽ More
We present a time-dependent density-functional method able to describe the photoelectron spectrum of atoms and molecules when excited by laser pulses. This computationally feasible scheme is based on a geometrical partitioning that efficiently gives access to photoelectron spectroscopy in time-dependent density-functional calculations. By using a geometrical approach, we provide a simple description of momentum-resolved photoe- mission including multi-photon effects. The approach is validated by comparison with results in the literature and exact calculations. Furthermore, we present numerical photoelectron angular distributions for randomly oriented nitrogen molecules in a short near infrared intense laser pulse and helium-(I) angular spectra for aligned carbon monoxide and benzene.
△ Less
Submitted 25 June, 2012;
originally announced June 2012.