-
Model selection and sensitivity analysis in the biomechanics of soft tissues: a case study on the human knee meniscus
Authors:
Elsiddig Elmukashfi,
Gregorio Marchiori,
Matteo Berni,
Giorgio Cassiolas,
Nicola Francesco Lopomo,
Hussein Rappel,
Mark Girolami,
Olga Barrera
Abstract:
Soft tissues - such as ligaments and tendons - primarily consist of solid (collagen, predominantly) and liquid phases. Understanding the interaction between such components and how they change under physiological loading sets the basis for elucidating the essential link between their internal structure and mechanical behaviour. In fact, the internal heterogeneous structure of this kind of tissues…
▽ More
Soft tissues - such as ligaments and tendons - primarily consist of solid (collagen, predominantly) and liquid phases. Understanding the interaction between such components and how they change under physiological loading sets the basis for elucidating the essential link between their internal structure and mechanical behaviour. In fact, the internal heterogeneous structure of this kind of tissues leads to a wide range of mechanical behaviours, which then determine their own function(s). Characterising these behaviours implies an important experimental effort in terms of tissue harvesting, samples preparation and implementation of testing protocols - which, often, are not standardised. These issues lead to several difficulties in both collecting and providing comparable and reliable information. In order to model the behaviours of heterogeneous tissues and identify material parameters, a large volume of reproducible experimental data is required; unfortunately, such an amount of information is often not available. In reality, most of the studies that are focused on the identification of material parameters, are largely based on small sets of experimental data, which present a large variability. Such a large variability opens on to uncertainties in the estimation of material parameters, as reported in the literature. Hence, the use of a rigorous probabilistic framework, that is able to address uncertainties due to paucity of data, is of paramount importance in the field of biomechanics; in this perspective, Bayesian inference represents a promising approach. This study was focused on the analysis of the knee meniscus as a paradigmatic example of human soft tissue.
△ Less
Submitted 26 December, 2021;
originally announced December 2021.
-
Learning from the Pandemic: the Future of Meetings in HEP and Beyond
Authors:
Mark S. Neubauer,
Todd Adams,
Jennifer Adelman-McCarthy,
Gabriele Benelli,
Tulika Bose,
David Britton,
Pat Burchat,
Joel Butler,
Timothy A. Cartwright,
Tomáš Davídek,
Jacques Dumarchez,
Peter Elmer,
Matthew Feickert,
Ben Galewsky,
Mandeep Gill,
Maciej Gladki,
Aman Goel,
Jonathan E. Guyer,
Bo Jayatilaka,
Brendan Kiburg,
Benjamin Krikler,
David Lange,
Claire Lee,
Nick Manganelli,
Giovanni Marchiori
, et al. (14 additional authors not shown)
Abstract:
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding…
▽ More
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding virtual meetings, workshops, and conferences. A great deal of experimentation and innovation to explore how to execute these meetings effectively has occurred. Therefore, it is an appropriate time to take stock of what we as a community learned from running virtual meetings and discuss possible strategies for the future. Continuing to develop effective strategies for meetings with a virtual component is likely to be important for reducing the carbon footprint of our research activities, while also enabling greater diversity and inclusion for participation. This report summarizes a virtual two-day workshop on Virtual Meetings held May 5-6, 2021 which brought together experts from both inside and outside of high-energy physics to share their experiences and practices with organizing and executing virtual workshops, and to develop possible strategies for future meetings as we begin to emerge from the COVID-19 pandemic. This report outlines some of the practices and tools that have worked well which we hope will serve as a valuable resource for future virtual meeting organizers in all scientific fields.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Hardware Acceleration of HPC Computational Flow Dynamics using HBM-enabled FPGAs
Authors:
Tom Hogervorst,
Tong Dong Qiu,
Giacomo Marchiori,
Alf Birger,
Markus Blatt,
Razvan Nane
Abstract:
Scientific computing is at the core of many High-Performance Computing applications, including computational flow dynamics. Because of the uttermost importance to simulate increasingly larger computational models, hardware acceleration is receiving increased attention due to its potential to maximize the performance of scientific computing. A Field-Programmable Gate Array is a reconfigurable hardw…
▽ More
Scientific computing is at the core of many High-Performance Computing applications, including computational flow dynamics. Because of the uttermost importance to simulate increasingly larger computational models, hardware acceleration is receiving increased attention due to its potential to maximize the performance of scientific computing. A Field-Programmable Gate Array is a reconfigurable hardware accelerator that is fully customizable in terms of computational resources and memory storage requirements of an application during its lifetime. Therefore, it is an ideal candidate to accelerate scientific computing applications because of the possibility to fully customize the memory hierarchy important in irregular applications such as iterative linear solvers found in scientific libraries. In this paper, we study the potential of using FPGA in HPC because of the rapid advances in reconfigurable hardware, such as the increase in on-chip memory size, increasing number of logic cells, and the integration of High-Bandwidth Memories on board. To perform this study, we first propose a novel ILU0 preconditioner tightly integrated with a BiCGStab solver kernel designed using a mixture of High-Level Synthesis and Register-Transfer Level hand-coded design. Second, we integrate the developed preconditioned iterative solver in Flow from the Open Porous Media (OPM) project, a state-of-the-art open-source reservoir simulator. Finally, we perform a thorough evaluation of the FPGA solver kernel in both standalone mode and integrated into the reservoir simulator that includes all the on-chip URAM and BRAM, on-board High-Bandwidth Memory, and off-chip CPU memory data transfers required in a complex simulator software such as OPM's Flow. We evaluate the performance on the Norne field, a real-world case reservoir model using a grid with more than 10^5 cells and using 3 unknowns per cell.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Performance of Thin Planar \textit{n-on-p} silicon pixels after HL-LHC radiation fluences
Authors:
A. Ducourthial,
M. Bomben,
G. Calderini,
R. Camacho,
L. D'Eramo,
I. Luise,
G. Marchiori,
M. Boscardin,
L. Bosisio,
G. Darbo,
G. -F. Dalla Betta,
G. Giacomini,
M. Meschini,
A. Messineo,
S. Ronchin,
N. Zorzi
Abstract:
The tracking detector of ATLAS, one of the experiments at the Large Hadron Collider (LHC), will be upgraded in 2024-2026 to cope with the challenging environment conditions of the High Luminosity LHC (HL-LHC). The LPNHE, in collaboration with FBK and INFN, has produced 130~$μ$m thick $n-on-p$ silicon pixel sensors which can withstand the expected large particle fluences at HL- LHC, while deliverin…
▽ More
The tracking detector of ATLAS, one of the experiments at the Large Hadron Collider (LHC), will be upgraded in 2024-2026 to cope with the challenging environment conditions of the High Luminosity LHC (HL-LHC). The LPNHE, in collaboration with FBK and INFN, has produced 130~$μ$m thick $n-on-p$ silicon pixel sensors which can withstand the expected large particle fluences at HL- LHC, while delivering data at high rate with excellent hit efficiency. Such sensors were tested on beam before and after irradiation both at CERN-SPS and at DESY, and their performances are presented in this paper. Beam test data indicate that these detectors are suited for all the layers where planar sensors are foreseen in the future ATLAS tracker: hit-efficiency is greater than 97\% for fluences $Φ\lesssim 7\times10^{15}\rm{n_{eq}/cm^2}$ and module power consumption is within the specified limits. Moreover, at a fluence $Φ= 1.3\times10^{16}\rm{n_{eq}/cm^2}$, hit-efficiency is still as high as 88\% and charge collection efficiency is about 30\%.
△ Less
Submitted 5 September, 2019; v1 submitted 16 October, 2018;
originally announced October 2018.
-
Beam test measurements of Low Gain Avalanche Detector single pads and arrays for the ATLAS High Granularity Timing Detector
Authors:
C. Allaire,
J. Benitez,
M. Bomben,
G. Calderini,
M. Carulla,
E. Cavallaro,
A. Falou,
D. Flores,
P. Freeman,
Z. Galloway,
E. L. Gkougkousis,
H. Grabas,
S. Grinstein,
B. Gruey,
S. Guindon,
A. M. Henriques Correia,
S. Hidalgo,
A. Kastanas,
C. Labitan,
D. Lacour,
J. Lange,
F. Lanni,
B. Lenzi,
Z. Luce,
N. Makovec
, et al. (19 additional authors not shown)
Abstract:
For the high luminosity upgrade of the LHC at CERN, ATLAS is considering the addition of a High Granularity Timing Detector (HGTD) in front of the end cap and forward calorimeters at |z| = 3.5 m and covering the region 2.4 < |η| < 4 to help reducing the effect of pile-up. The chosen sensors are arrays of 50 μm thin Low Gain Avalanche Detectors (LGAD). This paper presents results on single LGAD sen…
▽ More
For the high luminosity upgrade of the LHC at CERN, ATLAS is considering the addition of a High Granularity Timing Detector (HGTD) in front of the end cap and forward calorimeters at |z| = 3.5 m and covering the region 2.4 < |η| < 4 to help reducing the effect of pile-up. The chosen sensors are arrays of 50 μm thin Low Gain Avalanche Detectors (LGAD). This paper presents results on single LGAD sensors with a surface area of 1.3x1.3 mm2 and arrays with 2x2 pads with a surface area of 2x2 mm^2 or 3x3 mm^2 each and different implant doses of the p+ multiplication layer. They are obtained from data collected during a beam test campaign in Autumn 2016 with a pion beam of 120 GeV energy at the CERN SPS. In addition to several quantities measured inclusively for each pad, the gain, efficiency and time resolution have been estimated as a function of the position of the incident particle inside the pad by using a beam telescope with a position resolution of few μm. Different methods to measure the time resolution are compared, yielding consistent results. The sensors with a surface area of 1.3x1.3 mm^2 have a time resolution of about 40 ps for a gain of 20 and of about 27 ps for a gain of 50 and fulfill the HGTD requirements. Larger sensors have, as expected, a degraded time resolution. All sensors show very good efficiency and time resolution uniformity.
△ Less
Submitted 9 August, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Thin and edgeless sensors for ATLAS pixel detector upgrade
Authors:
Audrey Ducourthial,
Marco Bomben,
Giovanni Calderini,
Louis D'Eramo,
Giovanni Marchiori,
Ilaria Luise,
Alvise Bagolini,
Maurizio Boscardin,
Luciano Bosisio,
Giovanni Darbo,
Gian-Franco Dalla Betta,
Gabriele Giacomini,
Marco Meschini,
Alberto Messineo,
Sabina Ronchin,
Nicola Zorzi
Abstract:
To cope with the harsh environment foreseen at the high luminosity conditions of HL- LHC, the ATLAS pixel detector has to be upgraded to be fully efficient with a good granularity, a maximized geometrical acceptance and an high read out rate. LPNHE, FBK and INFN are involved in the development of thin and edgeless planar pixel sensors in which the insensitive area at the border of the sensor is mi…
▽ More
To cope with the harsh environment foreseen at the high luminosity conditions of HL- LHC, the ATLAS pixel detector has to be upgraded to be fully efficient with a good granularity, a maximized geometrical acceptance and an high read out rate. LPNHE, FBK and INFN are involved in the development of thin and edgeless planar pixel sensors in which the insensitive area at the border of the sensor is minimized thanks to the active edge technology. In this paper we report on two productions, a first one consisting of 200 μm thick n-on-p sensors with active edge, a second one composed of 100 and 130 μm thick n-on-p sensors. Those sensors have been tested on beam, both at CERN-SPS and at DESY and their performance before and after irradiation will be presented.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Performance of active edge pixel sensors
Authors:
Marco Bomben,
Audrey Ducourthial,
Alvise Bagolini,
Maurizio Boscardin,
Luciano Bosisio,
Giovanni Calderini,
Louis D'Eramo,
Gabriele Giacomini,
Giovanni Marchiori,
Nicola Zorzi,
André Rummler,
Jens Weingarten
Abstract:
To cope with the High Luminosity LHC harsh conditions, the ATLAS inner tracker has to be upgraded to meet requirements in terms of radiation hardness, pile up and geometrical acceptance. The active edge technology allows to reduce the insensitive area at the border of the sensor thanks to an ion etched trench which avoids the crystal damage produced by the standard mechanical dicing process. Thin…
▽ More
To cope with the High Luminosity LHC harsh conditions, the ATLAS inner tracker has to be upgraded to meet requirements in terms of radiation hardness, pile up and geometrical acceptance. The active edge technology allows to reduce the insensitive area at the border of the sensor thanks to an ion etched trench which avoids the crystal damage produced by the standard mechanical dicing process. Thin planar n-on-p pixel sensors with active edge have been designed and produced by LPNHE and FBK foundry. Two detector module prototypes, consisting of pixel sensors connected to FE-I4B readout chips, have been tested with beams at CERN and DESY. In this paper the performance of these modules are reported. In particular the lateral extension of the detection volume, beyond the pixel region, is investigated and the results show high hit-efficiency also at the detector edge, even in presence of guard rings.
△ Less
Submitted 4 April, 2017; v1 submitted 6 February, 2017;
originally announced February 2017.
-
Performance of Edgeless Silicon Pixel Sensors on p-type substrate for the ATLAS High-Luminosity Upgrade
Authors:
Marco Bomben,
Alvise Bagolini,
Maurizio Boscardin,
Luciano Bosisio,
Giovanni Calderini,
Jacques Chauveau,
Audrey Ducourthial,
Gabriele Giacomini,
Giovanni Marchiori,
Nicola Zorzi
Abstract:
In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. The n-on-p silicon technology is a promising candidate to achieve a large area instrumented with pixel sensors, since it is radiation hard and cost effective. The paper reports on the performance of novel n-on-p edgeless planar pixel senso…
▽ More
In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. The n-on-p silicon technology is a promising candidate to achieve a large area instrumented with pixel sensors, since it is radiation hard and cost effective. The paper reports on the performance of novel n-on-p edgeless planar pixel sensors produced by FBK-CMM, making use of the active trench for the reduction of the dead area at the periphery of the device. After discussing the sensor technology an overview of the first beam test results will be given.
△ Less
Submitted 7 September, 2016;
originally announced September 2016.
-
Selected results from the static characterization of edgeless n-on-p planar pixel sensors for ATLAS upgrades
Authors:
Gabriele Giacomini,
Alvise Bagolini,
Marco Bomben,
Maurizio Boscardin,
Luciano Bosisio,
Giovanni Calderini,
Jacques Chauveau,
Alessandro La Rosa,
Giovanni Marchiori,
Nicola Zorzi
Abstract:
In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-on-p technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. There is also the demand to reduce the inactive areas to a minimum. The ATL…
▽ More
In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-on-p technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. There is also the demand to reduce the inactive areas to a minimum. The ATLAS LPNHE Paris group and FBK Trento started a collaboration for the development on a novel n-on-p edgeless planar pixel design, based on the deep-trench process which can cope with all these demands. This paper reports selected results from the electrical characterization, both before and after irradiation, of test structures from the first production batch.
△ Less
Submitted 2 December, 2013;
originally announced December 2013.
-
Development of Edgeless Silicon Pixel Sensors on p-type substrate for the ATLAS High-Luminosity Upgrade
Authors:
G. Calderini,
A. Bagolini,
M. Bomben,
M. Boscardin,
L. Bosisio,
J. Chauveau,
G. Giacomini,
A. La Rosa,
G. Marchiori,
N. Zorzi
Abstract:
In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-in-p bulk technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. The large area necessary to instrument the outer layers will demand to…
▽ More
In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-in-p bulk technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. The large area necessary to instrument the outer layers will demand to tile the sensors, a solution for which the inefficient region at the border of each sensor needs to be reduced to the minimum size. This paper reports on a joint R&D project by the ATLAS LPNHE Paris group and FBK Trento on a novel n-in-p edgeless planar pixel design, based on the deep-trench process available at FTK.
△ Less
Submitted 21 October, 2013;
originally announced October 2013.
-
Planar Pixel Sensors for the ATLAS Upgrade: Beam Tests results
Authors:
J. Weingarten,
S. Altenheiner,
M. Beimforde,
M. Benoit,
M. Bomben,
G. Calderini,
C. Gallrapp,
M. George,
S. Gibson,
S. Grinstein,
Z. Janoska,
J. Jentzsch,
O. **nouchi,
T. Kishida,
A. La Rosa,
V. Libov,
A. Macchiolo,
G. Marchiori,
D. Münstermann,
R. Nagai,
G. Piacquadio,
B. Ristic,
I. Rubinskiy,
A. Rummler,
Y. Takubo
, et al. (6 additional authors not shown)
Abstract:
Results of beam tests with planar silicon pixel sensors aimed towards the ATLAS Insertable B-Layer and High Luminosity LHC (HL-LHC) upgrades are presented. Measurements include spatial resolution, charge collection performance and charge sharing between neighbouring cells as a function of track incidence angle for different bulk materials. Measurements of n-in-n pixel sensors are presented as a fu…
▽ More
Results of beam tests with planar silicon pixel sensors aimed towards the ATLAS Insertable B-Layer and High Luminosity LHC (HL-LHC) upgrades are presented. Measurements include spatial resolution, charge collection performance and charge sharing between neighbouring cells as a function of track incidence angle for different bulk materials. Measurements of n-in-n pixel sensors are presented as a function of fluence for different irradiations. Furthermore p-type silicon sensors from several vendors with slightly differing layouts were tested. All tested sensors were connected by bump-bonding to the ATLAS Pixel read-out chip. We show that both n-type and p-type tested planar sensors are able to collect significant charge even after integrated fluences expected at HL-LHC.
△ Less
Submitted 9 November, 2012; v1 submitted 5 April, 2012;
originally announced April 2012.
-
Recent results of the ATLAS Upgrade Planar Pixel Sensors R&D Project
Authors:
Giovanni Marchiori
Abstract:
The ATLAS detector has to undergo significant updates at the end of the current decade, in order to withstand the increased occupancy and radiation damage that will be produced by the high-luminosity upgrade of the Large Hadron Collider. In this presentation we give an overview of the recent accomplishments of the R&D activity on the planar pixel sensors for the ATLAS Inner Detector upgrade.
The ATLAS detector has to undergo significant updates at the end of the current decade, in order to withstand the increased occupancy and radiation damage that will be produced by the high-luminosity upgrade of the Large Hadron Collider. In this presentation we give an overview of the recent accomplishments of the R&D activity on the planar pixel sensors for the ATLAS Inner Detector upgrade.
△ Less
Submitted 27 January, 2012; v1 submitted 14 September, 2011;
originally announced September 2011.
-
Measurement of the Charge Collection Efficiency after Heavy Non-Uniform Irradiation in BaBar Silicon Detectors
Authors:
S. Bettarini,
M. Bondioli,
L. Bosisio,
G. Calderini,
C. Campagnari,
S. Dittongo,
F. Forti,
M. A. Giorgi,
G. Marchiori,
G. Rizzo
Abstract:
We have investigated the depletion voltage changes, the leakage current increase and the charge collection efficiency of a silicon microstrip detector identical to those used in the inner layers of the BaBar Silicon Vertex Tracker (SVT) after heavy non-uniform irradiation. A full SVT module with the front-end electronics connected has been irradiated with a 0.9 GeV electron beam up to a peak flu…
▽ More
We have investigated the depletion voltage changes, the leakage current increase and the charge collection efficiency of a silicon microstrip detector identical to those used in the inner layers of the BaBar Silicon Vertex Tracker (SVT) after heavy non-uniform irradiation. A full SVT module with the front-end electronics connected has been irradiated with a 0.9 GeV electron beam up to a peak fluence of 3.5 x 10^14 e^-/cm^2, well beyond the level causing substrate type inversion. We irradiated one of the two sensors composing the module with a non-uniform profile with sigma=1.4 mm that simulates the conditions encountered in the BaBar experiment by the modules intersecting the horizontal machine plane. The position dependence of the charge collection properties and the depletion voltage have been investigated in detail using a 1060 nm LED and an innovative measuring technique based only on the digital output of the chip.
△ Less
Submitted 6 April, 2005; v1 submitted 19 November, 2004;
originally announced November 2004.