-
Design, fabrication and test of a 5 GHz klystron based on the kladistron principle
Authors:
Juliette Plouin,
Claude Marchand,
Pierrick Hamel,
Sergey Arsenyev,
Antoine Mollard,
Armel Beunas,
Philippe Denis,
Franck Peauger
Abstract:
A new bunching method, named "kladistron" has been developed at CEA in order to provide high efficiency klystrons. A first "kladistron" prototype was designed and realized. It was adapted from the 4.9 GHz TH2166 from Thales, where the interaction line was transformed from 6 to 16 cavities. The design and fabrication phases of this prototype are developed in this paper. The kladistron prototype was…
▽ More
A new bunching method, named "kladistron" has been developed at CEA in order to provide high efficiency klystrons. A first "kladistron" prototype was designed and realized. It was adapted from the 4.9 GHz TH2166 from Thales, where the interaction line was transformed from 6 to 16 cavities. The design and fabrication phases of this prototype are developed in this paper. The kladistron prototype was tested in Thales facility. Its efficiency is finally lower (41 %) than expected (55 %), moreover it presents a spurious oscillation at 4.96 GHz. After analysis of the experimental results, it is concluded that the discrepancy between design and real frequencies is the cause for the low efficiency while the spurious oscillation results from a high gain peak at 4.96 GHz.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Security layers and related services within the Horizon Europe NEUROPULS project
Authors:
Fabio Pavanello,
Cedric Marchand,
Paul Jimenez,
Xavier Letartre,
Ricardo Chaves,
Niccolò Marastoni,
Alberto Lovato,
Mariano Ceccato,
George Papadimitriou,
Vasileios Karakostas,
Dimitris Gizopoulos,
Roberta Bardini,
Tzamn Melendez Carmona,
Stefano Di Carlo,
Alessandro Savino,
Laurence Lerch,
Ulrich Ruhrmair,
Sergio Vinagrero Gutierrez,
Giorgio Di Natale,
Elena Ioana Vatajelu
Abstract:
In the contemporary security landscape, the incorporation of photonics has emerged as a transformative force, unlocking a spectrum of possibilities to enhance the resilience and effectiveness of security primitives. This integration represents more than a mere technological augmentation; it signifies a paradigm shift towards innovative approaches capable of delivering security primitives with key…
▽ More
In the contemporary security landscape, the incorporation of photonics has emerged as a transformative force, unlocking a spectrum of possibilities to enhance the resilience and effectiveness of security primitives. This integration represents more than a mere technological augmentation; it signifies a paradigm shift towards innovative approaches capable of delivering security primitives with key properties for low-power systems. This not only augments the robustness of security frameworks, but also paves the way for novel strategies that adapt to the evolving challenges of the digital age. This paper discusses the security layers and related services that will be developed, modeled, and evaluated within the Horizon Europe NEUROPULS project. These layers will exploit novel implementations for security primitives based on physical unclonable functions (PUFs) using integrated photonics technology. Their objective is to provide a series of services to support the secure operation of a neuromorphic photonic accelerator for edge computing applications.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Three-dimensional flow around and through a porous screen
Authors:
Olivier C. Marchand,
Sophie Ramananarivo,
Camille Duprat,
Christophe Josserand
Abstract:
We investigate the three-dimensional flow around and through a porous screen for various porosities at high Reynolds number Re = O(10000). Historically, the study of this problem was focused on two-dimensional cases and for a screen spanning completely or partially a channel. Since many recent problems have involved a porous object in a three-dimensional free flow, we present a three-dimensional m…
▽ More
We investigate the three-dimensional flow around and through a porous screen for various porosities at high Reynolds number Re = O(10000). Historically, the study of this problem was focused on two-dimensional cases and for a screen spanning completely or partially a channel. Since many recent problems have involved a porous object in a three-dimensional free flow, we present a three-dimensional model for porous screens, initially based on Koo & James (1973) and Steiros & Hultmark (2018), accounting for viscous effects at the vicinity of the screen, from which we can derive velocities, pressure distribution as well as aerodynamic forces. We then characterize experimentally the aerodynamic drag coefficient for a porous square screen, composed of fibers, immersed in a laminar air flow with different angles of attack. We test various fiber diameters to explore the effect of the space between the pores on the drag force. The drag prediction from the model is in good agreement with our experimental results. Our theoretical and experimental results suggest that for high solidity, a homogeneous porous screens composed of fibers can have a higher drag coefficient than a flat plate with the same dimensions. We also show that local viscous effects are important: at the same solidity and with the same air flow, the drag coefficient strongly depends on the Reynolds number based on the fiber diameter. The model, taking into account three-dimensional effects and the shape of the porous screen, may have many applications including the prediction of water collection efficiency for fog harvesters.
△ Less
Submitted 8 November, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Coupled multiphysics analysis of a 4-vane RFQ accelerator under high power operation
Authors:
Xiaowen Zhu,
Claude Marchand,
Olivier Piquet,
Michel Desmons
Abstract:
The radiofrequency resonant four-quadrant mechanical structure of a 4-vane Radio Frequency Quadrupole (RFQ) has a high quality factor and narrow bandwidth, resulting in high sensitivity to frequency detuning caused by thermal expansion under high power operation, so minimization of frequency errors and affording dynamic tuning are very important design issues. Here we describe an optimization appr…
▽ More
The radiofrequency resonant four-quadrant mechanical structure of a 4-vane Radio Frequency Quadrupole (RFQ) has a high quality factor and narrow bandwidth, resulting in high sensitivity to frequency detuning caused by thermal expansion under high power operation, so minimization of frequency errors and affording dynamic tuning are very important design issues. Here we describe an optimization approach to figure out a suitable cooling design for a 4-vane RFQ in steady state. Besides, we investigate how the accelerator responds in transient thermal analysis that could help to guide commissioning and reduce frequency detuning. Multiphysics analysis utilized with CST and ANSYS for a recently developed 176 MHz 4-vane RFQ is taken as an example. This RFQ will dissipate 211 kW when reaching an inter-vane voltage of 80 kV, which is required for an acceleration of an 80-mA proton from 65 keV to 2.5 MeV in 5.3 meters.
△ Less
Submitted 11 March, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
High-frequency structure design and RF stability analysis of a 4-vane radio frequency quadrupole with pi-mode stabilizer loops
Authors:
Xiaowen Zhu,
Claude Marchand,
Olivier Piquet,
Michel Desmons
Abstract:
Compact accelerator-based neutron source facilities are garnering attention and play an important and expanding role in material and engineering sciences, as well as in neutron science education and training. Neutrons are produced by bombarding a low-energy proton beam onto a beryllium or lithium target. In such an accelerator-based neutron source, a radio frequency quadrupole (RFQ) is usually uti…
▽ More
Compact accelerator-based neutron source facilities are garnering attention and play an important and expanding role in material and engineering sciences, as well as in neutron science education and training. Neutrons are produced by bombarding a low-energy proton beam onto a beryllium or lithium target. In such an accelerator-based neutron source, a radio frequency quadrupole (RFQ) is usually utilized to accelerate a high-intensity proton beam to a few MeV. This study mainly covers the high-frequency structure design optimizations of a 4-vane RFQ with pi-mode stabilizer loops (PISLs) and its RF stability analysis. A 176 MHz RFQ accelerator is designed to operate at a 10% duty factor and could accelerate an 80 mA proton beam from 65 keV to 2.5 MeV within a length of 5.3 m. The adoption of PISLs ensures high RF stability, eases the operation of the accelerator, and implies less stringent alignment and machining tolerances.
△ Less
Submitted 18 March, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
Status of the llrf system for SARAF phase II
Authors:
L. Zhao,
G. Ferrand,
F. Gougnaud,
R. Duperrier,
N. Pichoff,
C. Marchand
Abstract:
CEA is committed to the design, construction and commissioning of a Medium Energy Beam Transfer line and a superconducting linac (SCL) for SARAF accelerator in order to accelerate 5mA beam of either protons from 1.3 MeV to 35 MeV or deuterons from 2.6 MeV to 40 MeV. The Low Level RF (LLRF) is a subsystem of the CEA control domain for the SARAF-LINAC instrumentation. The top level requirement of th…
▽ More
CEA is committed to the design, construction and commissioning of a Medium Energy Beam Transfer line and a superconducting linac (SCL) for SARAF accelerator in order to accelerate 5mA beam of either protons from 1.3 MeV to 35 MeV or deuterons from 2.6 MeV to 40 MeV. The Low Level RF (LLRF) is a subsystem of the CEA control domain for the SARAF-LINAC instrumentation. The top level requirement of the LLRF system has been presented in the last LLRF conference. The paper shows a simulink model to analyse and determinate the LLRF technical specification. The public bidding for SARAF LLRF is in the last phase: discussion with the selected company. The first prototype test will be performed at the start of 2020.
△ Less
Submitted 12 October, 2019; v1 submitted 27 September, 2019;
originally announced September 2019.
-
The COMPASS Setup for Physics with Hadron Beams
Authors:
Ph. Abbon,
C. Adolph,
R. Akhunzyanov,
Yu. Alexandrov,
M. G. Alexeev,
G. D. Alexeev,
A. Amoroso,
V. Andrieux,
V. Anosov,
A. Austregesilo,
B. Badelek,
F. Balestra,
J. Barth,
G. Baum,
R. Beck,
Y. Bedfer,
A. Berlin,
J. Bernhard,
K. Bicker,
E. R. Bielert,
J. Bieling,
R. Birsa,
J. Bisplinghoff,
M. Bodlak,
M. Boer
, et al. (207 additional authors not shown)
Abstract:
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well…
▽ More
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successfully used with positive and negative hadron beams and with liquid hydrogen and solid nuclear targets. This article describes the new and upgraded detectors and auxiliary equipment, outlines the reconstruction procedures used, and summarises the general performance of the setup.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
New pixelized Micromegas detector with low discharge rate for the COMPASS experiment
Authors:
Damien Neyret,
Philippe Abbon,
Marc Anfreville,
Yann Bedfer,
Etienne Burtin,
Christophe Coquelet,
Nicole d'Hose,
Daniel Desforge,
Arnaud Giganon,
Didier Jourde,
Fabienne Kunne,
Alain Magnon,
Nour Makke,
Claude Marchand,
Bernard Paul,
Stéphane Platchkov,
Florian Thibaud,
Michel Usseglio,
Maxence Vandenbroucke
Abstract:
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^{2}, 10 times larger than for the present Micr…
▽ More
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^{2}, 10 times larger than for the present Micromegas detectors) with pixelized read-out in the central part, light and integrated electronics, and improved robustness. Two solutions of reduction of discharge impact have been studied, with Micromegas detectors using resistive layers and using an additional GEM foil. Performance of such detectors has also been measured. A large size prototypes with nominal active area and pixelized read-out has been produced and installed at COMPASS in 2010. In 2011 prototypes featuring an additional GEM foil, as well as an resistive prototype, are installed at COMPASS and preliminary results from those detectors presented very good performance. We present here the project and report on its status, in particular the performance of large size prototypes with an additional GEM foil.
△ Less
Submitted 25 January, 2012; v1 submitted 14 November, 2011;
originally announced November 2011.
-
New pixelized Micromegas detector for the COMPASS experiment
Authors:
Damien Neyret,
Marc Anfreville,
Yann Bedfer,
Etienne Burtin,
Nicole d'Hose,
Arnaud Giganon,
Bernhard Ketzer,
Igor Konorov,
Fabienne Kunne,
Alain Magnon,
Claude Marchand,
Bernard Paul,
Stéphane Platchkov,
Maxence Vandenbroucke
Abstract:
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^2, 10 times larger than for the present dete…
▽ More
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^2, 10 times larger than for the present detectors) with pixelized read-out in the central part, light and integrated electronics, and improved robustness. Studies were done with the present detectors moved in the beam, and two first pixelized prototypes are being tested with muon and hadron beams in real conditions at COMPASS. We present here this new project and report on two series of tests, with old detectors moved into the beam and with pixelized prototypes operated in real data taking condition with both muon and hadron beams.
△ Less
Submitted 19 October, 2009; v1 submitted 29 September, 2009;
originally announced September 2009.