-
Cavity-assisted resonance fluorescence from a nitrogen-vacancy center in diamond
Authors:
Viktoria Yurgens,
Yannik Fontana,
Andrea Corazza,
Brendan J. Shields,
Patrick Maletinsky,
Richard J. Warburton
Abstract:
The nitrogen-vacancy center in diamond, owing to its optically addressable and long-lived electronic spin, is an attractive resource for the generation of remote entangled states. However, the center's low native fraction of coherent photon emission, $\sim$3\%, strongly reduces the achievable spin-photon entanglement rates. Here, we couple a nitrogen-vacancy center with a narrow extrinsically broa…
▽ More
The nitrogen-vacancy center in diamond, owing to its optically addressable and long-lived electronic spin, is an attractive resource for the generation of remote entangled states. However, the center's low native fraction of coherent photon emission, $\sim$3\%, strongly reduces the achievable spin-photon entanglement rates. Here, we couple a nitrogen-vacancy center with a narrow extrinsically broadened linewidth (\unit[159]{MHz}), hosted in a micron-thin membrane, to the mode of an open optical microcavity. The resulting Purcell factor of $\sim$1.8 increases the fraction of zero-phonon line photons to above 44\%, leading to coherent photon emission rates exceeding four times the state of the art under non-resonant excitation. Bolstered by the enhancement provided by the cavity, we for the first time measure resonance fluorescence without any temporal filtering with $>$10 signal-to-laser background ratio. Our microcavity platform would increase spin-spin entanglement success probabilities by more than an order of magnitude compared to existing implementations. Selective enhancement of the center's zero-phonon transitions could furthermore unlock efficient application of quantum optics techniques such as wave-packet sha** or all-optical spin manipulation.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Spectrally stable nitrogen-vacancy centers in diamond formed by carbon implantation into thin microstructures
Authors:
V. Yurgens,
A. Corazza,
J. A. Zuber,
M. Gruet,
M. Kasperczyk,
B. J. Shields,
R. J. Warburton,
Y. Fontana,
P. Maletinsky
Abstract:
The nitrogen-vacancy center (NV) in diamond, with its exceptional spin coherence and convenience in optical spin initialization and readout, is increasingly used both as a quantum sensor and as a building block for quantum networks. Employing photonic structures for maximizing the photon collection efficiency in these applications typically leads to broadened optical linewidths for the emitters, w…
▽ More
The nitrogen-vacancy center (NV) in diamond, with its exceptional spin coherence and convenience in optical spin initialization and readout, is increasingly used both as a quantum sensor and as a building block for quantum networks. Employing photonic structures for maximizing the photon collection efficiency in these applications typically leads to broadened optical linewidths for the emitters, which are commonly created via nitrogen ion implantation. With studies showing that only native nitrogen atoms contribute to optically coherent NVs, a natural conclusion is to either avoid implantation completely, or substitute nitrogen implantation by an alternative approach to vacancy creation. Here, we demonstrate that implantation of carbon ions yields a comparable density of NVs as implantation of nitrogen ions, and that it results in NV populations with narrow optical linewidths and low charge-noise levels even in thin diamond microstructures. We measure a median NV linewidth of 150 MHz for structures thinner than 5 $μ$m, with no trend of increasing linewidths down to the thinnest measured structure of 1.9 $μ$m. We propose a modified NV creation procedure in which the implantation is carried out after instead of before the diamond fabrication processes, and confirm our results in multiple samples implanted with different ion energies and fluences.
△ Less
Submitted 5 December, 2022; v1 submitted 16 September, 2022;
originally announced September 2022.
-
Untrained physically informed neural network for image reconstruction of magnetic field sources
Authors:
A. E. E. Dubois,
D. A. Broadway,
A. Stark,
M. A. Tschudin,
A. J. Healey,
S. D. Huber,
J. -P. Tetienne,
E. Greplova,
P. Maletinsky
Abstract:
Predicting measurement outcomes from an underlying structure often follows directly from fundamental physical principles. However, a fundamental challenge is posed when trying to solve the inverse problem of inferring the underlying source-configuration based on measurement data. A key difficulty arises from the fact that such reconstructions often involve ill-posed transformations and that they a…
▽ More
Predicting measurement outcomes from an underlying structure often follows directly from fundamental physical principles. However, a fundamental challenge is posed when trying to solve the inverse problem of inferring the underlying source-configuration based on measurement data. A key difficulty arises from the fact that such reconstructions often involve ill-posed transformations and that they are prone to numerical artefacts. Here, we develop a numerically efficient method to tackle this inverse problem for the reconstruction of magnetisation maps from measured magnetic stray field images. Our method is based on neural networks with physically inferred loss functions to efficiently eliminate common numerical artefacts. We report on a significant improvement in reconstruction over traditional methods and we show that our approach is robust to different magnetisation directions, both in- and out-of-plane, and to variations of the magnetic field measurement axis orientation. While we showcase the performance of our method using magnetometry with Nitrogen Vacancy centre spins in diamond, our neural-network-based approach to solving inverse problems is agnostic to the measurement technique and thus is applicable beyond the specific use-case demonstrated in this work.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Neutral silicon vacancy centers in undoped diamond via surface control
Authors:
Zi-Huai Zhang,
Josh A. Zuber,
Lila V. H. Rodgers,
Xin Gui,
Paul Stevenson,
Minghao Li,
Marietta Batzer,
Marcel. li Grimau,
Brendan Shields,
Andrew M. Edmonds,
Nicola Palmer,
Matthew L. Markham,
Robert J. Cava,
Patrick Maletinsky,
Nathalie P. de Leon
Abstract:
Neutral silicon vacancy centers (SiV0) in diamond are promising candidates for quantum networks because of their long spin coherence times and stable, narrow optical transitions. However, stabilizing SiV0 requires high purity, boron doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage c…
▽ More
Neutral silicon vacancy centers (SiV0) in diamond are promising candidates for quantum networks because of their long spin coherence times and stable, narrow optical transitions. However, stabilizing SiV0 requires high purity, boron doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage chemical processing and annealing in a hydrogen environment to realize reversible and highly stable charge state tuning in undoped diamond. The resulting SiV0 centers display optically detected magnetic resonance and bulk-like optical properties. Controlling the charge state tuning via surface termination offers a route for scalable technologies based on SiV0 centers, as well as charge state engineering of other defects.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Widely-tunable, doubly-resonant Raman scattering on diamond in an open microcavity
Authors:
Sigurd Flågan,
Patrick Maletinsky,
Richard J. Warburton,
Daniel Riedel
Abstract:
Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold power requirements on the order of several Watts. Using on-chip microresonators, a significant reduction of the lasing threshold by more than two orders of magnit…
▽ More
Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold power requirements on the order of several Watts. Using on-chip microresonators, a significant reduction of the lasing threshold by more than two orders of magnitude has been shown. However, these resonators lack a continuous tuning mechanism and, mainly due to fabrication limitations, their implementation in the visible remains elusive. Here, we propose a platform for a diamond Raman laser in the visible. The device is based on a miniaturized, open-access Fabry-Perot cavity. Our microcavity provides widely-tunable doubly-resonant enhancement of Raman scattering from high quality single-crystalline diamond. We demonstrate a $>$THz continuous tuning range of doubly-resonant Raman scattering, a range limited only by the reflective stopband of the mirrors. Based on the experimentally determined quality factors exceeding $300\,000$, our theoretical analysis suggests that, with realistic improvements, a sub-mW threshold is readily within reach. Our findings pave the way to the creation of a universal low-power frequency shifter, a potentially valuable addition to the nonlinear optics toolbox.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Low charge-noise nitrogen-vacancy centers in diamond created using laser writing with a solid-immersion lens
Authors:
Viktoria Yurgens,
Josh A. Zuber,
Sigurd Flågan,
Marta De Luca,
Brendan J. Shields,
Ilaria Zardo,
Patrick Maletinsky,
Richard J. Warburton,
Tomasz Jakubczyk
Abstract:
We report on pulsed-laser induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tu…
▽ More
We report on pulsed-laser induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization. We present three samples in which NV-center arrays were laser-written at distances between ~1 $μ$m and 40 $μ$m from a diamond surface, all presenting narrow distributions of optical linewidths with means between 62.1 MHz and 74.5 MHz. The linewidths include the effect of long-term spectral diffusion induced by a 532 nm repump laser for charge-state stabilization, thereby emphasizing the particularly low charge-noise environment of the created color centers. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV center optical linewidth.
△ Less
Submitted 11 August, 2021; v1 submitted 23 February, 2021;
originally announced February 2021.
-
Improved current density and magnetisation reconstruction through vector magnetic field measurements
Authors:
D. A. Broadway,
S. E. Lillie,
Sam C. Scholten,
D. Rohner,
N. Dontschuk,
P. Maletinsky,
J. -P. Tetienne,
L. C. L. Hollenberg
Abstract:
Stray magnetic fields contain significant information about the electronic and magnetic properties of condensed matter systems. For two-dimensional (2D) systems, stray field measurements can even allow full determination of the source quantity. For instance, a 2D map of the stray magnetic field can be uniquely transformed into the 2D current density that gave rise to the field and, under some cond…
▽ More
Stray magnetic fields contain significant information about the electronic and magnetic properties of condensed matter systems. For two-dimensional (2D) systems, stray field measurements can even allow full determination of the source quantity. For instance, a 2D map of the stray magnetic field can be uniquely transformed into the 2D current density that gave rise to the field and, under some conditions, into the equivalent 2D magnetisation. However, implementing these transformations typically requires truncation of the initial data and involves singularities that may introduce errors, artefacts, and amplify noise. Here we investigate the possibility of mitigating these issues through vector measurements. For each scenario (current reconstruction and magnetisation reconstruction) the different possible reconstruction pathways are analysed and their performances compared. In particular, we find that the simultaneous measurement of both in-plane components ($B_x$ and $B_y$) enables near-ideal reconstruction of the current density, without singularity or truncation artefacts, which constitutes a significant improvement over reconstruction based on a single component (e.g. $B_z$). On the other hand, for magnetisation reconstruction, a single measurement of the out-of-plane field ($B_z$) is generally the best choice, regardless of the magnetisation direction. We verify these findings experimentally using nitrogen-vacancy magnetometry in the case of a 2D current density and a 2D magnet with perpendicular magnetisation.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Parabolic diamond scanning probes for single spin magnetic field imaging
Authors:
N. Hedrich,
D. Rohner,
M. Batzer,
P. Maletinsky,
B. J. Shields
Abstract:
Enhancing the measurement signal from solid state quantum sensors such as the nitrogen-vacancy (NV) center in diamond is an important problem for sensing and imaging of condensed matter systems. Here we engineer diamond scanning probes with a truncated parabolic profile that optimizes the photonic signal from single embedded NV centers, forming a high-sensitivity probe for nanoscale magnetic field…
▽ More
Enhancing the measurement signal from solid state quantum sensors such as the nitrogen-vacancy (NV) center in diamond is an important problem for sensing and imaging of condensed matter systems. Here we engineer diamond scanning probes with a truncated parabolic profile that optimizes the photonic signal from single embedded NV centers, forming a high-sensitivity probe for nanoscale magnetic field imaging. We develop a scalable fabrication procedure based on dry etching with a flowable oxide mask to reliably produce a controlled tip curvature. The resulting parabolic tip shape yields a median saturation count rate of 2.1 $\pm$ 0.2 MHz, the highest reported for single NVs in scanning probes to date. Furthermore, the structures operate across the full NV photoluminescence spectrum, emitting into a numerical aperture of 0.46 and the end-facet of the truncated tip, located near the focus of the parabola, allows for small NV-sample spacings and nanoscale imaging. We demonstrate the excellent properties of these diamond scanning probes by imaging ferromagnetic stripes with a spatial resolution better than 50 nm. Our results mark a 5-fold improvement in measurement signal over the state-of-the art in scanning-probe based NV sensors.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Optimal architecture for diamond-based wide-field thermal imaging
Authors:
R. Tanos,
W. Akhtar,
S. Monneret,
F. Favaro de Oliveira,
G. Seniutinas,
M. Munsch,
P. Maletinsky,
L. le Gratiet,
I. Sagnes,
A. Dréau,
C. Gergely,
V. Jacques,
G. Baffou,
I. Robert-Philip
Abstract:
Nitrogen-Vacancy centers in diamond possess an electronic spin resonance that strongly depends on temperature, which makes them efficient temperature sensor with a sensitivity down to a few mK/$\sqrt{\rm Hz}$. However, the high thermal conductivity of the host diamond may strongly damp any temperature variations, leading to invasive measurements when probing local temperature distributions. In vie…
▽ More
Nitrogen-Vacancy centers in diamond possess an electronic spin resonance that strongly depends on temperature, which makes them efficient temperature sensor with a sensitivity down to a few mK/$\sqrt{\rm Hz}$. However, the high thermal conductivity of the host diamond may strongly damp any temperature variations, leading to invasive measurements when probing local temperature distributions. In view of determining possible and optimal configurations for diamond-based wide-field thermal imaging, we here investigate, both experimentally and numerically, the effect of the presence of diamond on microscale temperature distributions. Three geometrical configurations are studied: a bulk diamond substrate, a thin diamond layer bonded on quartz and diamond nanoparticles dispersed on quartz. We show that the use of bulk diamond substrates for thermal imaging is highly invasive, in the sense that it prevents any substantial temperature increase. Conversely, thin diamond layers partly solve this issue and could provide a possible alternative for microscale thermal imaging. Dispersions of diamond nanoparticles throughout the sample appear as the most relevant approach as they do not affect the temperature distribution, although NV centers in nanodiamonds yield lower temperature sensitivities compared to bulk diamond.
△ Less
Submitted 27 January, 2020;
originally announced January 2020.
-
Cavity-enhanced Raman scattering for in situ alignment and characterization of solid-state microcavities
Authors:
Daniel Riedel,
Sigurd Flågan,
Patrick Maletinsky,
Richard J. Warburton
Abstract:
We report cavity-enhanced Raman scattering from a single-crystal diamond membrane embedded in a highly miniaturized fully-tunable Fabry-Pérot cavity. The Raman intensity is enhanced 58.8-fold compared to the corresponding confocal measurement. The strong signal amplification results from the Purcell effect. We show that the cavity-enhanced Raman scattering can be harnessed as a narrowband, high-in…
▽ More
We report cavity-enhanced Raman scattering from a single-crystal diamond membrane embedded in a highly miniaturized fully-tunable Fabry-Pérot cavity. The Raman intensity is enhanced 58.8-fold compared to the corresponding confocal measurement. The strong signal amplification results from the Purcell effect. We show that the cavity-enhanced Raman scattering can be harnessed as a narrowband, high-intensity, internal light-source. The Raman process can be triggered in a simple way by using an optical excitation frequency outside the cavity stopband and is independent of the lateral positioning of the cavity mode with respect to the diamond membrane. The strong Raman signal emerging from the cavity output facilitates in situ mode-matching of the cavity mode to single-mode collection optics; it also represents a simple way of measuring the dispersion and spatial intensity-profile of the cavity modes. The optimization of the cavity performance via the strong Raman process is extremely helpful in achieving efficient cavity-outcoupling of the relatively weak emission of single color-centers such as nitrogen-vacancy centers in diamond or rare-earth ions in crystalline hosts with low emitter density.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
Nanoscale Quantum Optics
Authors:
I. D'Amico,
D. G. Angelakis,
F. Bussières,
H. Caglayan,
C. Couteau,
T. Durt,
B. Kolaric,
P. Maletinsky,
W. Pfeiffer,
P. Rabl,
A. Xuereb,
M. Agio
Abstract:
Nanoscale quantum optics explores quantum phenomena in nanophotonics systems for advancing fundamental knowledge in nano and quantum optics and for harnessing the laws of quantum physics in the development of new photonics-based technologies. Here, we review recent progress in the field with emphasis on four main research areas: Generation, detection, manipulation and storage of quantum states of…
▽ More
Nanoscale quantum optics explores quantum phenomena in nanophotonics systems for advancing fundamental knowledge in nano and quantum optics and for harnessing the laws of quantum physics in the development of new photonics-based technologies. Here, we review recent progress in the field with emphasis on four main research areas: Generation, detection, manipulation and storage of quantum states of light at the nanoscale, Nonlinearities and ultrafast processes in nanostructured media, Nanoscale quantum coherence, Cooperative effects, correlations and many-body physics tailored by strongly confined optical fields. The focus is both on basic developments and technological implications, especially for what concerns information and communication technology, sensing and metrology, and energy efficiency.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Advanced Fabrication of Single-crystal Diamond Membranes for Quantum Technologies
Authors:
Michel Challier,
Selda Sonusen,
Arne Barfuss,
Dominik Rohner,
Daniel Riedel,
Johannes Koelbl,
Marc Ganzhorn,
Patrick Appel,
Patrick Maletinsky,
Elke Neu
Abstract:
Many promising applications of single crystal diamond and its color centers as sensor platform and in photonics require free-standing membranes with a thickness ranging from several micrometers to the few 100 nm range. In this work, we present an approach to conveniently fabricate such thin membranes with up to about one millimeter in size. We use commercially available diamond plates (thickness 5…
▽ More
Many promising applications of single crystal diamond and its color centers as sensor platform and in photonics require free-standing membranes with a thickness ranging from several micrometers to the few 100 nm range. In this work, we present an approach to conveniently fabricate such thin membranes with up to about one millimeter in size. We use commercially available diamond plates (thickness 50 $μ$m) in an inductively coupled reactive ion etching process which is based on argon, oxygen and SF$_6$. We thus avoid using toxic, corrosive feed gases and add an alternative to previously presented recipes involving chlorine-based etching steps. Our membranes are smooth (RMS roughness <1 nm) and show moderate thickness variation (central part: <1 $μ$m over $\approx \,$200x200 $μ$m$^2$). Due to an improved etch mask geometry, our membranes stay reliably attached to the diamond plate in our chlorine-based as well as SF$_6$-based processes. Our results thus open the route towards higher reliability in diamond device fabrication and up-scaling.
△ Less
Submitted 22 March, 2018; v1 submitted 25 February, 2018;
originally announced February 2018.
-
Microwave device characterisation using a widefield diamond microscope
Authors:
Andrew Horsley,
Patrick Appel,
Janik Wolters,
Jocelyn Achard,
Alexandre Tallaire,
Patrick Maletinsky,
Philipp Treutlein
Abstract:
Devices relying on microwave circuitry form a cornerstone of many classical and emerging quantum technologies. A capability to provide in-situ, noninvasive and direct imaging of the microwave fields above such devices would be a powerful tool for their function and failure analysis. In this work, we build on recent achievements in magnetometry using ensembles of nitrogen vacancy centres in diamond…
▽ More
Devices relying on microwave circuitry form a cornerstone of many classical and emerging quantum technologies. A capability to provide in-situ, noninvasive and direct imaging of the microwave fields above such devices would be a powerful tool for their function and failure analysis. In this work, we build on recent achievements in magnetometry using ensembles of nitrogen vacancy centres in diamond, to present a widefield microwave microscope with few-micron resolution over a millimeter-scale field of view, 130nT/sqrt-Hz microwave amplitude sensitivity, a dynamic range of 48 dB, and sub-ms temporal resolution. We use our microscope to image the microwave field a few microns above a range of microwave circuitry components, and to characterise a novel atom chip design. Our results open the way to high-throughput characterisation and debugging of complex, multi-component microwave devices, including real-time exploration of device operation.
△ Less
Submitted 17 October, 2018; v1 submitted 20 February, 2018;
originally announced February 2018.
-
Deterministic enhancement of coherent photon generation from a nitrogen-vacancy center in ultrapure diamond
Authors:
Daniel Riedel,
Immo Söllner,
Brendan J. Shields,
Sebastian Starosielec,
Patrick Appel,
Elke Neu,
Patrick Maletinsky,
Richard J. Warburton
Abstract:
The nitrogen-vacancy (NV) center in diamond has an optically addressable, highly coherent spin. However, an NV center even in high quality single-crystalline material is a very poor source of single photons: extraction out of the high-index diamond is inefficient, the emission of coherent photons represents just a few per cent of the total emission, and the decay time is large. In principle, all t…
▽ More
The nitrogen-vacancy (NV) center in diamond has an optically addressable, highly coherent spin. However, an NV center even in high quality single-crystalline material is a very poor source of single photons: extraction out of the high-index diamond is inefficient, the emission of coherent photons represents just a few per cent of the total emission, and the decay time is large. In principle, all three problems can be addressed with a resonant microcavity. In practice, it has proved difficult to implement this concept: photonic engineering hinges on nano-fabrication yet it is notoriously difficult to process diamond without degrading the NV centers. We present here a microcavity scheme which uses minimally processed diamond, thereby preserving the high quality of the starting material, and a tunable microcavity platform. We demonstrate a clear change in the lifetime for multiple individual NV centers on tuning both the cavity frequency and anti-node position, a Purcell effect. The overall Purcell factor $F_{\rm P}=2.0$ translates to a Purcell factor for the zero phonon line (ZPL) of $F_{\rm P}^{\rm ZPL}\sim30$ and an increase in the ZPL emission probability from $\sim 3 \%$ to $\sim 46 \%$. By making a step-change in the NV's optical properties in a deterministic way, these results pave the way for much enhanced spin-photon and spin-spin entanglement rates.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Site selective growth of heteroepitaxial diamond nanoislands containing single SiV centers
Authors:
Carsten Arend,
Patrick Appel,
Jonas Nils Becker,
Marcel Schmidt,
Martin Fischer,
Stefan Gsell,
Matthias Schreck,
Christoph Becher,
Patrick Maletinsky,
Elke Neu
Abstract:
We demonstrate the controlled preparation of heteroepitaxial diamond nano- and microstructures on silicon wafer based iridium films as hosts for single color centers. Our approach uses electron beam lithography followed by reactive ion etching to pattern the carbon layer formed by bias enhanced nucleation on the iridium surface. In the subsequent chemical vapor deposition process, the patterned ar…
▽ More
We demonstrate the controlled preparation of heteroepitaxial diamond nano- and microstructures on silicon wafer based iridium films as hosts for single color centers. Our approach uses electron beam lithography followed by reactive ion etching to pattern the carbon layer formed by bias enhanced nucleation on the iridium surface. In the subsequent chemical vapor deposition process, the patterned areas evolve into regular arrays of (001) oriented diamond nano-islands with diameters of <500nm and a height of approx. 60 nm. In the islands, we identify single SiV color centers with narrow zero phonon lines down to 1 nm at room temperature.
△ Less
Submitted 9 February, 2016; v1 submitted 11 November, 2015;
originally announced November 2015.
-
Stokes--anti-Stokes Correlations in Raman Scattering from Diamond Membranes
Authors:
Mark Kasperczyk,
Ado Jorio,
Elke Neu,
Patrick Maletinsky,
Lukas Novotny
Abstract:
We investigate the arrival statistics of Stokes (S) and anti-Stokes (aS) Raman photons generated in diamond membranes. Strong quantum correlations between the S and aS signals are observed, which implies that the two processes share the same phonon, that is, the phonon excited by the S process is consumed in the aS process. We show that the intensity cross-correlation $g_{\rm S,aS}^{(2)}(0)$, whic…
▽ More
We investigate the arrival statistics of Stokes (S) and anti-Stokes (aS) Raman photons generated in diamond membranes. Strong quantum correlations between the S and aS signals are observed, which implies that the two processes share the same phonon, that is, the phonon excited by the S process is consumed in the aS process. We show that the intensity cross-correlation $g_{\rm S,aS}^{(2)}(0)$, which describes the simultaneous detection of Stokes and anti-Stokes photons, decreases steadily with laser power as $1/{\rm P_L}$. Contrary to many other material systems, diamond exhibits a maximum $g_{\rm S,aS}^{(2)}(0)$ at very low pump powers, implying that the Stokes-induced aS photons outnumber the thermally generated aS photons. On the other hand, the coincidence rate shows a quadratic plus cubic power dependence, which indicates a departure from the Stokes-induced anti-Stokes process.
△ Less
Submitted 2 March, 2015;
originally announced March 2015.
-
A low-loss, broadband antenna for efficient photon collection from a coherent spin in diamond
Authors:
D. Riedel,
D. Rohner,
M. Ganzhorn,
T. Kaldewey,
P. Appel,
E. Neu,
R. J. Warburton,
P. Maletinsky
Abstract:
We report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid-state. The device, the first solid-state realization of a dielectric antenna, is engineered for individual nitrogen vacancy (NV) electronic spins in diamond. We demonstrate a directionality close to 10. The photonic structure preserves the high spin coherence of si…
▽ More
We report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid-state. The device, the first solid-state realization of a dielectric antenna, is engineered for individual nitrogen vacancy (NV) electronic spins in diamond. We demonstrate a directionality close to 10. The photonic structure preserves the high spin coherence of single crystal diamond (T2>100us). The single photon count rate approaches a MHz facilitating efficient spin readout. We thus demonstrate a key enabling technology for quantum applications such as high-sensitivity magnetometry and long-distance spin entanglement.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
Optical-phonon resonances with saddle-point excitons in twisted-bilayer graphene
Authors:
Ado Jorio,
Mark Kasperczyk,
Nick Clark,
Elke Neu,
Patrick Maletinsky,
Aravind Vijayaraghavan,
Lukas Novotny
Abstract:
Twisted-bilayer graphene (tBLG) exhibits van Hove singularities in the density of states that can be tuned by changing the twisting angle $θ$. A $θ$-defined tBLG has been produced and characterized with optical reflectivity and resonance Raman scattering. The $θ$-engineered optical response is shown to be consistent with persistent saddle-point excitons. Separate resonances with Stokes and anti-St…
▽ More
Twisted-bilayer graphene (tBLG) exhibits van Hove singularities in the density of states that can be tuned by changing the twisting angle $θ$. A $θ$-defined tBLG has been produced and characterized with optical reflectivity and resonance Raman scattering. The $θ$-engineered optical response is shown to be consistent with persistent saddle-point excitons. Separate resonances with Stokes and anti-Stokes Raman scattering components can be achieved due to the sharpness of the two-dimensional saddle-point excitons, similar to what has been previously observed for one-dimensional carbon nanotubes. The excitation power dependence for the Stokes and anti-Stokes emissions indicate that the two processes are correlated and that they share the same phonon.
△ Less
Submitted 27 June, 2014;
originally announced June 2014.
-
Integrated diamond networks for quantum nanophotonics
Authors:
Birgit J. M. Hausmann,
Brendan Shields,
Qimin Quan,
Patrick Maletinsky,
Murray McCutcheon,
Jennifer T. Choy,
Tom M. Babinec,
Alexander Kubanek,
Amir Yacoby,
Mikhail D. Lukin,
Marko Loncar
Abstract:
Diamond is a unique material with exceptional physical and chemical properties that offers potential for the realization of high-performance devices with novel functionalities. For example diamond's high refractive index, transparency over wide wavelength range, and large Raman gain are of interest for the implementation of novel photonic devices. Recently, atom-like impurities in diamond emerged…
▽ More
Diamond is a unique material with exceptional physical and chemical properties that offers potential for the realization of high-performance devices with novel functionalities. For example diamond's high refractive index, transparency over wide wavelength range, and large Raman gain are of interest for the implementation of novel photonic devices. Recently, atom-like impurities in diamond emerged as an exceptional system for quantum information processing, quantum sensing and quantum networks. For these and other applications, it is essential to develop an integrated nanophotonic platform based on diamond. Here, we report on the realization of such an integrated diamond photonic platform, diamond on insulator (DOI), consisting of a thin single crystal diamond film on top of an insulating silicon dioxide/silicon substrate. Using this approach, we demonstrate diamond ring resonators that operate in a wide wavelength range, including the visible (630nm) and near-infrared (1,550nm). Finally, we demonstrate an integrated, on-chip quantum nanophotonic network, consisting of ring resonators coupled to low loss waveguides with grating couplers, that enables the generation and efficient routing of single photons at room temperature.
△ Less
Submitted 5 January, 2012; v1 submitted 22 November, 2011;
originally announced November 2011.
-
On Measuring the Electron Electric Dipole Moment in Trapped Molecular Ions
Authors:
Aaron E. Leanhardt,
John L. Bohn,
Huanqian Loh,
Patrick Maletinsky,
Edmund R. Meyer,
Laura C. Sinclair,
Russell P. Stutz,
Eric A. Cornell
Abstract:
Trapped diatomic molecular ions could prove to be a sensitive probe for a permanent electron electric dipole moment (eEDM). We propose to use a ground or metastable $^3Δ_1$ level, due to its high polarizability and large EDM enhancement factor. Ions allow for simple trap** and long interrogation times, but require a time-varying electric bias field in order to probe the eEDM. We discuss experime…
▽ More
Trapped diatomic molecular ions could prove to be a sensitive probe for a permanent electron electric dipole moment (eEDM). We propose to use a ground or metastable $^3Δ_1$ level, due to its high polarizability and large EDM enhancement factor. Ions allow for simple trap** and long interrogation times, but require a time-varying electric bias field in order to probe the eEDM. We discuss experimental design as well as challenges in performing a precision spectroscopic measurement in rapidly time-varying electric fields.
△ Less
Submitted 18 July, 2011; v1 submitted 17 August, 2010;
originally announced August 2010.
-
Dynamics of Quantum Dot Nuclear Spin Polarization Controlled by a Single Electron
Authors:
P. Maletinsky,
A. Badolato,
A. Imamoglu
Abstract:
We present an experimental study of the dynamics underlying the buildup and decay of dynamical nuclear spin polarization in a single semiconductor quantum dot. Our experiment shows that the nuclei can be polarized on a time scale of a few milliseconds, while their decay dynamics depends drastically on external parameters. We show that a single electron can very efficiently depolarize the nuclear…
▽ More
We present an experimental study of the dynamics underlying the buildup and decay of dynamical nuclear spin polarization in a single semiconductor quantum dot. Our experiment shows that the nuclei can be polarized on a time scale of a few milliseconds, while their decay dynamics depends drastically on external parameters. We show that a single electron can very efficiently depolarize the nuclear spins and discuss two processes that can cause this depolarization. Conversely, in the absence of a quantum dot electron, the lifetime of nuclear spin polarization is on the time scale of a second, most likely limited by the non-secular terms of the nuclear dipole-dipole interaction. We can further suppress this depolarization rate by 1-2 orders of magnitude by applying an external magnetic field exceeding 1 mT.
△ Less
Submitted 27 April, 2007;
originally announced April 2007.