-
Detector developments for the hypernuclear programme at PANDA
Authors:
P. Achenbach,
J. Pochodzalla,
A. Sanchez Lorente,
S. Sánchez Majos
Abstract:
The technical design of the PANDA experiment at the future FAIR facility next to GSI is progressing. At the proposed anti-proton storage ring the spectroscopy of double Lambda hypernuclei is one of the four main topics which will be addressed by the Collaboration. The hypernuclear experiments require (i) a dedicated internal target, (ii) an active secondary target of alternating silicon and absorb…
▽ More
The technical design of the PANDA experiment at the future FAIR facility next to GSI is progressing. At the proposed anti-proton storage ring the spectroscopy of double Lambda hypernuclei is one of the four main topics which will be addressed by the Collaboration. The hypernuclear experiments require (i) a dedicated internal target, (ii) an active secondary target of alternating silicon and absorber material layers, (iii) high purity germanium (HPGe) detectors, and (iv) a good particle identification system for low momentum kaons. All systems need to operate in the presence of a high magnetic field and a large hadronic background. The status of the detector developments for this programme is summarized.
△ Less
Submitted 1 May, 2011;
originally announced May 2011.
-
A Tracking Fiber Detector based on Silicon Photomultipliers for the Kaos Spectrometer
Authors:
P. Achenbach,
J. Pochodzalla,
S. Sánchez Majos
Abstract:
A tracking detector based on two meters long scintillating fibers read out by silicon photomultipliers (SiPM) is being developed for the Kaos spectrometer at the Mainz Microtron MAMI. Results from a prototype setup using 2 mm square fibers and large area SiPM readout are presented. The detection efficiency of such a combination was measured to be between 83 and 100% depending on the threshold on t…
▽ More
A tracking detector based on two meters long scintillating fibers read out by silicon photomultipliers (SiPM) is being developed for the Kaos spectrometer at the Mainz Microtron MAMI. Results from a prototype setup using 2 mm square fibers and large area SiPM readout are presented. The detection efficiency of such a combination was measured to be between 83 and 100% depending on the threshold on the SiPM amplitude. A Monte Carlo simulation based on a physical model was employed in order to extract the photon detection efficiency of the SiPM devices.
△ Less
Submitted 1 May, 2011;
originally announced May 2011.
-
A Large-Scale FPGA-Based Trigger and Dead-Time Free DAQ System for the Kaos Spectrometer at MAMI
Authors:
P. Achenbach,
C. Ayerbe Gayoso,
J. C. Bernauer,
R. Böhm,
D. Bosnar,
L. Debenjak,
M. O. Distler,
A. Esser,
I. Friščić,
M. Gómez Rodríguez de la Paz,
J. Hoffmann,
M. Makek,
H. Merkel,
S. Minami,
U. Müller,
L. Nungesser,
W. Ott,
J. Pochodzalla,
M. Potokar,
I. Rusanov,
T. R. Saito,
S. Sánchez Majos,
B. S. Schlimme,
S. Širca,
S. Voltz
, et al. (2 additional authors not shown)
Abstract:
The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timin…
▽ More
The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timing and tracking information has been installed for this spectrometer arm. The signals of 144 multi-anode photomultipliers are collected by 96-channel front-end boards, digitized by double-threshold discriminators and the signal time is picked up by state-of-the-art F1 time-to-digital converter chips. In order to minimize background rates a sophisticated trigger logic was implemented in newly developed Vuprom modules. The trigger performs noise suppression, signal cluster finding, particle tracking, and coincidence timing, and can be expanded for kinematical matching (e'K^+) coincidences. The full system was designed to process more than 4 000 read-out channels and to cope with the high electron flux in the spectrometer and the high count rate requirement of the detectors. It was successfully in-beam tested at MAMI in 2009.
△ Less
Submitted 1 May, 2011;
originally announced May 2011.
-
Particle tracking in kaon electroproduction with cathode-charge sampling in multi-wire proportional chambers
Authors:
P. Achenbach,
C. Ayerbe Gayoso,
J. C. Bernauer,
R. Böhm,
D. Bosnar,
M. Bösz,
L. Debenjak,
M. O. Distler,
A. Esser,
I. Friščić,
M. Gómez Rodríguez de la Paz,
M. Makek,
H. Merkel,
U. Müller,
L. Nungesser,
J. Pochodzalla,
M. Potokar,
S. Sánchez Majos,
B. S. Schlimme,
S. Širca,
M. Weinriefer
Abstract:
Wire chambers are routinely operated as tracking detectors in magnetic spectrometers at high-intensity continuous electron beams. Especially in experiments studying reactions with small cross-sections the reaction yield is limited by the background rate in the chambers. One way to determine the track of a charged particle through a multi-wire proportional chamber (MWPC) is the measurement of the c…
▽ More
Wire chambers are routinely operated as tracking detectors in magnetic spectrometers at high-intensity continuous electron beams. Especially in experiments studying reactions with small cross-sections the reaction yield is limited by the background rate in the chambers. One way to determine the track of a charged particle through a multi-wire proportional chamber (MWPC) is the measurement of the charge distribution induced on its cathodes. In practical applications of this read-out method, the algorithm to relate the measured charge distribution to the avalanche position is an important factor for the achievable position resolution and for the track reconstruction efficiency. An algorithm was developed for operating two large-sized MWPCs in a strong background environment with multiple-particle tracks. Resulting efficiencies were determined as a function of the electron beam current and on the signal amplitudes. Because of the different energy-losses of pions, kaons, and protons in the momentum range of the spectrometer the efficiencies depend also on the particle species.
△ Less
Submitted 21 April, 2011;
originally announced April 2011.
-
Future use of silicon photomultiplier for KAOS at MAMI and PANDA at FAIR
Authors:
P. Achenbach,
A. Sanchez Lorente,
S. Sánchez Majos,
J. Pochodzalla
Abstract:
A characterisation of scintillating fibres with silicon photomultiplier read-out was performed in view of their possible application in fibre tracking detector systems. Such a concept is being considered for the Kaos spectrometer at the Mainz Microtron MAMI and as a time-of-flight start detector for the hypernuclear physics programme at the PANDA experiment of the FAIR project. Results on particle…
▽ More
A characterisation of scintillating fibres with silicon photomultiplier read-out was performed in view of their possible application in fibre tracking detector systems. Such a concept is being considered for the Kaos spectrometer at the Mainz Microtron MAMI and as a time-of-flight start detector for the hypernuclear physics programme at the PANDA experiment of the FAIR project. Results on particle detection effciency and time resolution are discussed. In summary, the silicon devices are very suitable for the detection of the low light yield from scintillating fibres insofar a trigger scheme is found to cope with the noise rate characteristics.
△ Less
Submitted 1 May, 2011; v1 submitted 27 June, 2008;
originally announced June 2008.
