-
Definition of vortex boundary using stagnation pressure
Authors:
Marc Plasseraud,
Krishnan Mahesh
Abstract:
A novel method is proposed to identify vortex boundary and center of rotation based on tubular surfaces of constant stagnation pressure and minimum of the stagnation pressure gradient. The method is derived from Crocco's theorem, which ensures that the gradient of stagnation pressure is orthogonal to both the velocity and vorticity vectors. The method is Galilean invariant, requires little process…
▽ More
A novel method is proposed to identify vortex boundary and center of rotation based on tubular surfaces of constant stagnation pressure and minimum of the stagnation pressure gradient. The method is derived from Crocco's theorem, which ensures that the gradient of stagnation pressure is orthogonal to both the velocity and vorticity vectors. The method is Galilean invariant, requires little processing and is robust. It enables visualization of complex turbulent flows and provides a physically consistent definition of vortex boundaries for quantitative analyses. This vortex boundary is a material surface that is representative of the kinematics of the flow by construction, constitutes a vortex tube, ensures conservation of circulation in the inviscid limit and provides a unique relation to the conservation of momentum equations and vortex loads.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
A variational volume-of-fluid approach for front propagation
Authors:
Ali Fakhreddine,
Karim Alamé,
Krishnan Mahesh
Abstract:
A variational volume-of-fluid (VVOF) methodology is devised for evolving interfaces under curvature-dependent speed. The interface is reconstructed geometrically using the analytic relations of Scardovelli and Zaleski [1] and the advection of the volume fraction is performed using the algorithm of Weymouth and Yue (WY) [2] with a technique to incorporate a volume conservation constraint. The propo…
▽ More
A variational volume-of-fluid (VVOF) methodology is devised for evolving interfaces under curvature-dependent speed. The interface is reconstructed geometrically using the analytic relations of Scardovelli and Zaleski [1] and the advection of the volume fraction is performed using the algorithm of Weymouth and Yue (WY) [2] with a technique to incorporate a volume conservation constraint. The proposed approach has the advantage of simple implementation and straightforward extension to more complex systems. Canonical curves and surfaces traditionally investigated by the level set (LS) method are tested with the VVOF approach and results are compared with existing work in LS.
△ Less
Submitted 24 February, 2023;
originally announced March 2023.
-
Boundary layer transition due to distributed roughness: Effect of roughness spacing
Authors:
Rong Ma,
Krishnan Mahesh
Abstract:
The influence of roughness spacing on boundary layer transition over distributed roughness elements is studied using direct numerical simulation (DNS) and global stability analysis, and compared to isolated roughness elements at the same Reh. Small spanwise spacing ($λ_z = 2.5h$) inhibits the formation of counter-rotating vortices (CVP) and as a result, hairpin vortices are not generated and the d…
▽ More
The influence of roughness spacing on boundary layer transition over distributed roughness elements is studied using direct numerical simulation (DNS) and global stability analysis, and compared to isolated roughness elements at the same Reh. Small spanwise spacing ($λ_z = 2.5h$) inhibits the formation of counter-rotating vortices (CVP) and as a result, hairpin vortices are not generated and the downstream shear layer is steady. For $λ_z = 5h$, the CVP and hairpin vortices are induced by the first row of roughness, perturbing the downstream shear layer and causing transition. The temporal periodicity of the primary hairpin vortices appears to be independent of the streamwise spacing. Distributed roughness leads to a lower critical Reh for instability to occur and a more significant breakdown of the boundary layer compared to isolated roughness. When the streamwise spacing is comparable to the region of flow separation ($λ_x = 5h$), the high-momentum fluid barely moves downward into the cavities and the wake flow has little impact on the following roughness elements. The leading unstable varicose mode is associated with the central low-speed streaks along the aligned roughness elements, and its frequency is close to the shedding frequency of hairpin vortices in the isolated case. For larger streamwise spacing ($λ_x = 10h$), two distinct modes are obtained from global stability analysis. The first mode shows varicose symmetry, corresponding to the primary hairpin vortex shedding induced by the first-row roughness. The high-speed streaks formed in the longitudinal grooves are also found to be unstable and interacting with the varicose mode. The second mode is a sinuous mode with lower frequency, induced as the wake flow of the first-row roughness runs into the second row. It extracts most energy from the spanwise shear between the high- and low-speed streaks.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
Global stability analysis and direct numerical simulation of boundary layers with an isolated roughness element
Authors:
Rong Ma,
Krishnan Mahesh
Abstract:
Global stability analysis and direct numerical simulation (DNS) are performed to study boundary layer flows with an isolated roughness element. Wall-attached cuboids with aspect ratios $η=1$ and $η=0.5$ are investigated for fixed ratio of roughness height to displacement boundary layer thickness $h/δ^*=2.86$. Global stability analysis is able to capture the frequency of the primary vortical struct…
▽ More
Global stability analysis and direct numerical simulation (DNS) are performed to study boundary layer flows with an isolated roughness element. Wall-attached cuboids with aspect ratios $η=1$ and $η=0.5$ are investigated for fixed ratio of roughness height to displacement boundary layer thickness $h/δ^*=2.86$. Global stability analysis is able to capture the frequency of the primary vortical structures. For $η=1$, only varicose instability is seen. For the thinner roughness element ($η=0.5$), the varicose instability dominates the sinuous instability, and the sinuous instability becomes more pronounced as $Re_h$ increases, due to increased spanwise shear in the near-wake region. The unstable modes mainly extract energy from the central streak, although the lateral streaks also contribute. The DNS results show that different instability features lead to different behavior and development of vortical structures in the nonlinear transition process. For $η=1$, the varicose mode is associated with the shedding of hairpin vortices. As $Re_h$ increases, the breakdown of hairpin vortices occurs closer to the roughness and sinuous breakdown behavior promoting transition to turbulence is seen in the farther wake. A fully-developed turbulent flow is established in both the inner and outer layers farther downstream when $Re_h$ is sufficiently high. For $η=0.5$, the sinuous wiggling of hairpin vortices is prominent at higher $Re_h$, leading to stronger interactions in the near wake, as a result of combined varicose and sinuous instabilities. A sinuous mode captured by dynamic mode decomposition (DMD) analysis, and associated with the `wiggling' of streaks persists far downstream.
△ Less
Submitted 5 December, 2021;
originally announced December 2021.
-
A method to determine wall shear stress from mean profiles in turbulent boundary layers
Authors:
Praveen Kumar,
Krishnan Mahesh
Abstract:
The direct measurement of wall shear stress in turbulent boundary layers (TBL) is challenging, therefore requiring it to be indirectly determined from mean profile measurements. Most popular methods assume the mean streamwise velocity to satisfy either a logarithmic law in the inner layer or a composite velocity profile with many tuned constants for the entire TBL, both of which require reliable d…
▽ More
The direct measurement of wall shear stress in turbulent boundary layers (TBL) is challenging, therefore requiring it to be indirectly determined from mean profile measurements. Most popular methods assume the mean streamwise velocity to satisfy either a logarithmic law in the inner layer or a composite velocity profile with many tuned constants for the entire TBL, both of which require reliable data from the inner layer. The presence of roughness and pressure gradient brings additional complications where most existing methods either fail or require significant modification. A novel method is proposed to determine the wall shear stress in zero pressure gradient TBL from measured mean profiles, without requiring near-wall data. The method is based on the stress model of Kumar and Mahesh [Phys. Rev. Fluids 6, 024603 (2021)], who developed accurate models for mean stress and wall-normal velocity in zero pressure gradient TBL. The proposed method requires a single point measurement of mean streamwise velocity and mean shear stress in the outer layer, preferably between $20$ to $50 \%$ of the TBL, and an estimate of boundary layer thickness and shape factor. The method can handle wall roughness without modification and is shown to predict friction velocities to within $3 \%$ over a range of Reynolds number for both smooth and rough wall zero pressure gradient TBL. In order to include the pressure gradients effects, the work of Kumar and Mahesh [Phys. Rev. Fluids 6, 024603 (2021)] is revisited to derive a novel model for both mean stress and wall-normal velocity in pressure gradient TBL, which is then used to formulate a method to obtain the wall shear stress from the profile data. Overall, the proposed method is shown to be robust and accurate for a variety of pressure gradient TBL.
△ Less
Submitted 16 November, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Response of a plate in turbulent channel flow: Analysis of fluid-solid coupling
Authors:
Sreevatsa Anantharamu,
Krishnan Mahesh
Abstract:
The paper performs simulation of a rectangular plate excited by turbulent channel flow at friction Reynolds numbers of 180 and 400. The fluid-structure interaction is assumed to be one-way coupled, i.e, the fluid affects the solid and not vice versa. We solve the incompressible Navier Stokes equations using finite volume direct numerical simulation in the fluid domain. In the solid domain, we solv…
▽ More
The paper performs simulation of a rectangular plate excited by turbulent channel flow at friction Reynolds numbers of 180 and 400. The fluid-structure interaction is assumed to be one-way coupled, i.e, the fluid affects the solid and not vice versa. We solve the incompressible Navier Stokes equations using finite volume direct numerical simulation in the fluid domain. In the solid domain, we solve the dynamic linear elasticity equations using a time-domain finite element method. The obtained plate averaged displacement spectra collapse in the low frequency region in outer scaling. However, the high frequency spectral levels do not collapse in inner units. This spectral behavior is reasoned using theoretical arguments. We further study the sources of plate excitation using a novel formulation. This formulation expresses the average displacement spectra of the plate as an integrated contribution from the fluid sources within the channel. Analysis of the net displacement source reveals that at the plate natural frequencies, the contribution of the fluid sources to the plate excitation peaks in the buffer layer. The corresponding wall-normal width is found to be $\approx 0.75δ$. We analyze the decorrelated features of the sources using spectral Proper Orthogonal Decomposition (POD) of the net displacement source. We enforce the orthogonality of the modes in an inner product with a symmetric positive definite kernel. The dominant spectral POD mode contributes to the entire plate excitation. The contribution of the remaining modes from the different wall-normal regions undergo destructive interference resulting in zero net contribution. The envelope of the dominant mode further shows that the location and width of the contribution depend on inner and outer units, respectively.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Analysis of wall-pressure fluctuation sources from DNS of turbulent channel flow
Authors:
Sreevatsa Anantharamu,
Krishnan Mahesh
Abstract:
The sources of wall-pressure fluctuations in turbulent channel flow are studied using a novel framework. The wall-pressure power spectral density (PSD) $(φ_{pp}(ω))$ is expressed as an integrated contribution from all wall-parallel plane pairs, $φ_{pp}(ω)=\int_{-δ}^{+δ}\int_{-δ}^{+δ}Γ(r,s,ω)\,\mathrm{dr}\,\mathrm{ds}$, using the Green's function. Here, $Γ(r,s,ω)$ is termed the net source cross spe…
▽ More
The sources of wall-pressure fluctuations in turbulent channel flow are studied using a novel framework. The wall-pressure power spectral density (PSD) $(φ_{pp}(ω))$ is expressed as an integrated contribution from all wall-parallel plane pairs, $φ_{pp}(ω)=\int_{-δ}^{+δ}\int_{-δ}^{+δ}Γ(r,s,ω)\,\mathrm{dr}\,\mathrm{ds}$, using the Green's function. Here, $Γ(r,s,ω)$ is termed the net source cross spectral density (CSD) between two wall-parallel planes, $y=r$ and $y=s$ and $δ$ is the half channel height. Direct Numerical Simulation (DNS) data at friction Reynolds number of $180$ and $400$ are used to compute $Γ(r,s,ω)$. Analysis of the net source CSD, $Γ(r,s,ω)$ reveals that the location of dominant sources responsible for the premultiplied peak in the power spectra at $ω^+\approx 0.35$ and the wavenumber spectra at $λ^+\approx 200$ is in the buffer layer at $y^+\approx 16.5$ and $18.4$ for $Re_τ=180$ and $400$, respectively. The contribution from a wall-parallel plane (located at distance $y^+$ from the wall) to wall-pressure PSD is log-normal in $y^+$ for $ω^+>0.35$. A dominant inner-overlap region interaction of the sources is observed at low frequencies. Further, the decorrelated features of the wall-pressure fluctuation sources are analyzed using spectral Proper Orthogonal Decomposition (POD). We require the modes to be orthogonal in an inner product with a symmetric positive definite kernel. Spectral POD supports the case that the net source is composed of two decorrelated components - active (dominant mode) and inactive (remaining modes). The structure represented by the dominant POD mode at the premultiplied wall-pressure PSD peak inclines in the downstream direction. At the low-frequency linear PSD peak, the dominant mode resembles a large scale vertical pattern.
△ Less
Submitted 31 March, 2020; v1 submitted 19 November, 2019;
originally announced November 2019.
-
Numerical study of cavitation regimes in flow over a circular cylinder
Authors:
Filipe L. Brandao,
Mrugank Bhatt,
Krishnan Mahesh
Abstract:
Cavitating flow over a circular cylinder is investigated over a range of cavitation numbers for both laminar and turbulent regimes. We observe non-cavitating, cyclic and transitional cavitation regimes with reduction in freestream $σ$. The cavitation inside the Karman vortices in the cyclic regime, is significantly altered by the onset of "condensation front" propagation in the transitional regime…
▽ More
Cavitating flow over a circular cylinder is investigated over a range of cavitation numbers for both laminar and turbulent regimes. We observe non-cavitating, cyclic and transitional cavitation regimes with reduction in freestream $σ$. The cavitation inside the Karman vortices in the cyclic regime, is significantly altered by the onset of "condensation front" propagation in the transitional regime. At the transition, an order of magnitude jump in shedding Strouhal number is observed as the dominant frequency shifts from periodic vortex shedding in the cyclic regime, to irregular-regular vortex shedding in the transitional regime. In addition, a peak in pressure fluctuations, and a maximum in St versus $σ$ based on cavity length are observed at the transition. Shedding characteristics in each regime are discussed using dynamic mode decomposition. It is demonstrated that the condensation fronts observed in the transitional regime are supersonic (referred as "condensation shocks"). In the presence of NCG, multiple condensation shocks in a given cycle are required for complete cavity condensation and detachment, as compared to a single condensation shock when only vapor is present. This is explained by the reduction in pressure ratio across the shock in the presence of NCG effectively reducing its strength. In addition, at $σ=0.85$ (near transition from the cyclic to the transitional regime), presence of NCG suppresses the low frequency irregular-regular vortex shedding. Vorticity transport at $Re=3900$, in the transitional regime, indicates that the region of attached cavity is nearly two-dimensional with very low vorticity, affecting Karman shedding in the near wake. In addition, the boundary-layer separation point is found to be strongly dependent on the amounts of vapor and gas in the freestream for both laminar and turbulent regimes.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
A variational level set methodology without reinitialization for the prediction of equilibrium interfaces over arbitrary solid surfaces
Authors:
Karim Alamé,
Sreevatsa Anantharamu,
Krishnan Mahesh
Abstract:
A robust numerical methodology to predict equilibrium interfaces over arbitrary solid surfaces is developed. The kernel of the proposed method is the distance regularized level set equations (DRLSE) with techniques to incorporate the no-penetration and mass-conservation constraints. In this framework, we avoid reinitialization typically used in traditional level set methods. This allows for a more…
▽ More
A robust numerical methodology to predict equilibrium interfaces over arbitrary solid surfaces is developed. The kernel of the proposed method is the distance regularized level set equations (DRLSE) with techniques to incorporate the no-penetration and mass-conservation constraints. In this framework, we avoid reinitialization typically used in traditional level set methods. This allows for a more efficient algorithm since only one advection equation is solved, and avoids numerical error associated with the re-distancing step. A novel surface tension distribution, based on harmonic mean, is prescribed such that the zero level set has the correct the liquid-solid surface tension value. This leads to a more accurate triple contact point location. The method uses second-order central difference schemes which facilitates easy parallel implementation, and is validated by comparing to traditional level set methods for canonical problems. The application of the method, in the context of Gibbs free energy minimization, to obtain liquid-air interfaces is validated against existing analytical solutions. The capability of our current methodology to predict equilibrium shapes over both structured and realistic rough surfaces is demonstrated.
△ Less
Submitted 23 December, 2019; v1 submitted 19 July, 2019;
originally announced July 2019.
-
Direct numerical simulation of turbulent channel flow over random rough surfaces
Authors:
R. Ma,
K. Alamé,
K. Mahesh
Abstract:
Direct numerical simulation (DNS) of flow in a turbulent channel with a random rough wall is performed at $Re_τ=400$ and $600$. The roughness geometry corresponds to the experiments of Flack and Schultz (personal communication). The rough surface is used on the bottom wall of the channel. DNS of a smooth channel flow and a rod-roughened channel flow are also performed at $Re_τ=400$ for validation…
▽ More
Direct numerical simulation (DNS) of flow in a turbulent channel with a random rough wall is performed at $Re_τ=400$ and $600$. The roughness geometry corresponds to the experiments of Flack and Schultz (personal communication). The rough surface is used on the bottom wall of the channel. DNS of a smooth channel flow and a rod-roughened channel flow are also performed at $Re_τ=400$ for validation and comparison. The skin friction coefficient of the random-rough channel shows good agreement with the experimental results of Flack and Schultz. Due to the roughness, the slip velocity on the rough wall increases while the mean velocity decreases in the log-law region. The streamwise and spanwise velocity fluctuations are enhanced near the rough wall. The pressure fluctuations show a significant increase in the roughness layer and exhibit a good collapse with the smooth wall in the outer layer. The streamwise mean momentum balance shows that pressure and viscous stress gradients are induced in the roughness layer, and the gradients are amplified at higher $Re_τ$. The statistics of wall-shear stress fluctuations in the peak (above the mean height location) and valley (below the mean height location) regions are examined. The results indicate that reverse flow mainly occurs in the valley regions of the random roughness, and is enhanced at higher $Re_τ$, but is not as strong as the recirculation within the cavities in the rod-roughened channel. The probability distribution function of wall-shear stress shows a better collapse after subtracting the mean and normalizing by the root-mean-squared value. The distribution tail is widened by the random roughness, implying that the probability of extreme events is increased. The probability of extreme events in the random-rough channel increases with increasing $Re_τ$, in accordance with previous studies on smooth-wall flows.
△ Less
Submitted 9 October, 2020; v1 submitted 24 July, 2019;
originally announced July 2019.
-
Multiphase unsteady Stokes flow over grooved surfaces: an analytical study
Authors:
Yixuan Li,
Karim Alame,
Krishnan Mahesh
Abstract:
This paper studies multiphase flow within grooved textures exposed to external unsteadiness. We derive analytical expressions for multiphase unsteady Stokes flow driven by oscillating streamwise/spanwise velocity in the presence of periodic grooves. Good agreement is obtained between the analytical solution and direct numerical simulations performed using the volume of fluid method. The effects of…
▽ More
This paper studies multiphase flow within grooved textures exposed to external unsteadiness. We derive analytical expressions for multiphase unsteady Stokes flow driven by oscillating streamwise/spanwise velocity in the presence of periodic grooves. Good agreement is obtained between the analytical solution and direct numerical simulations performed using the volume of fluid method. The effects of oscillation frequency, Reynolds number, and the multiphase interface location on the transfer function between the input signal external to the groove and output near the interface, are examined. The effective slip length and the shear stress over the grooved plane are described.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
A parallel and streaming Dynamic Mode Decomposition algorithm with finite precision error analysis for large data
Authors:
Sreevatsa Anantharamu,
Krishnan Mahesh
Abstract:
A novel technique based on the Full Orthogonalization Arnoldi (FOA) is proposed to perform Dynamic Mode Decomposition (DMD) for a sequence of snapshots. A modification to FOA is presented for situations where the matrix $A$ is unknown, but the set of vectors $\{A^{i-1}v_1\}_{i=1}^{N-1}$ are known. The modified FOA is the kernel for the proposed projected DMD algorithm termed, FOA based DMD. The pr…
▽ More
A novel technique based on the Full Orthogonalization Arnoldi (FOA) is proposed to perform Dynamic Mode Decomposition (DMD) for a sequence of snapshots. A modification to FOA is presented for situations where the matrix $A$ is unknown, but the set of vectors $\{A^{i-1}v_1\}_{i=1}^{N-1}$ are known. The modified FOA is the kernel for the proposed projected DMD algorithm termed, FOA based DMD. The proposed algorithm to compute DMD modes and eigenvalues i) does not require Singular Value Decomposition (SVD) for snapshot matrices $X$ with $κ_2(X) \ll 1/ε_m$, where $κ_2(X)$ is the 2-norm condition number of the snapshot matrix and $ε_m$ is the relative round-off error or machine epsilon, ii) has an optional rank truncation step motivated by round off error analysis for snapshot matrices $X$ with $κ_2(X) \approx 1/ε_m$, iii) requires only one snapshot at a time, thus making it a 'streaming' method even with the optional rank truncation step, iv) consumes less memory and requires less floating point operations to obtain the projected matrix than existing projected DMD methods and v) lends itself to easy parallelism as the main computational kernel involves only vector additions, dot products and matrix vector products. The new technique is therefore well-suited for DMD of large datasets on parallel computing platforms. We show both theoretically and using numerical examples that for FOA based DMD without rank truncation, the finite precision error in the computed projection of the linear map** is $O(ε_mκ_2(X))$. The proposed method is also compared to existing projected DMD methods for computational cost, memory consumption and relative round off error. Error indicators are presented that are useful to decide when to stop acquiring new snapshots. The proposed method is applied to several examples of numerical simulations of fluid flow.
△ Less
Submitted 2 January, 2019; v1 submitted 14 May, 2018;
originally announced May 2018.
-
Wall-bounded flow over a realistically rough superhydrophobic surface
Authors:
Karim Alamé,
Krishnan Mahesh
Abstract:
Direct numerical simulations (DNS) are performed for two wall-bounded flow configurations: laminar Couette flow at $Re=740$ and turbulent channel flow at $Re_τ=180$, where $τ$ is the shear stress at the wall. The top wall is smooth and the bottom wall is a realistically rough superhydrophobic surface (SHS), generated from a three-dimensional surface profile measurement. The air-water interface, wh…
▽ More
Direct numerical simulations (DNS) are performed for two wall-bounded flow configurations: laminar Couette flow at $Re=740$ and turbulent channel flow at $Re_τ=180$, where $τ$ is the shear stress at the wall. The top wall is smooth and the bottom wall is a realistically rough superhydrophobic surface (SHS), generated from a three-dimensional surface profile measurement. The air-water interface, which is assumed to be flat, is simulated using the volume-of-fluid (VOF) approach. The laminar Couette flow is studied with varying interface heights $h$ to understand the effect on slip and drag reduction ($DR$). The presence of the surface roughness is felt up to $40\%$ of the channel height in the wall-normal direction. A nonlinear dependence of $DR$ on $h$ is observed with three distinct regions. The DNS results are used to obtain a nonlinear curve fit for gas fraction $φ_g$ as a function of $h$, where $φ_g$ determines the amount of slip area exposed to the flow. A power law linear regression fit is used to obtain $b_{eff}$ as a function of $φ_g$. For the turbulent channel flow, statistics of the flow field are compared to that of a smooth wall to understand the effects of roughness and $h$. Two interface heights, $h=h_{rms}$ and $h=h_{max}$ are simulated to study their effect on the behaviour of the flow, where $h_{rms}$ and $h_{max}$ are the rms and maximum peak of the roughness heights respectively. Results show that the presence of trapped air in the cavities significantly alters near wall flow physics. The fully wetted roughness increases the peak value in turbulent intensities, whereas the presence of the interface suppresses them. Overall, there exists a competing effect between the interface and the asperities, where the interface suppresses turbulence whereas the asperities enhance them.
△ Less
Submitted 1 July, 2019; v1 submitted 19 February, 2018;
originally announced February 2018.
-
Analysis of axisymmetric boundary layers
Authors:
Praveen Kumar,
Krishnan Mahesh
Abstract:
Axisymmetric boundary layers are studied using integral analysis of the governing equations for axial flow over a circular cylinder. The analysis includes the effect of pressure gradient and focuses on the effect of transverse curvature on boundary layer parameters such as shape factor ($H$) and skin-friction coefficient ($C_f$), defined as $H = δ^*/θ$ and $C_f = τ_w/(0.5ρU_e^2)$ respectively, whe…
▽ More
Axisymmetric boundary layers are studied using integral analysis of the governing equations for axial flow over a circular cylinder. The analysis includes the effect of pressure gradient and focuses on the effect of transverse curvature on boundary layer parameters such as shape factor ($H$) and skin-friction coefficient ($C_f$), defined as $H = δ^*/θ$ and $C_f = τ_w/(0.5ρU_e^2)$ respectively, where $δ^*$ is displacement thickness, $θ$ is momentum thickness, $τ_w$ is the shear stress at the wall, $ρ$ is density and $U_e$ is the streamwise velocity at the edge of the boundary layer. Relations are obtained relating the mean wall-normal velocity at the edge of the boundary layer ($V_e$) and $C_f$ to the boundary layer and pressure gradient parameters. The analytical relations reduce to established results for planar boundary layers in the limit of infinite radius of curvature. The relations are used to obtain $C_f$ which shows good agreement with the data reported in the literature. The analytical results are used to discuss different flow regimes of axisymmetric boundary layers in the presence of pressure gradients.
△ Less
Submitted 23 March, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.