-
Manipulation of polarization topology using a Fabry-Pérot fiber cavity with a higher-order mode optical nanofiber
Authors:
Maki Maeda,
Jameesh Keloth,
Síle Nic Chormaic
Abstract:
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry-Pérot fiber cavity with an optical nanofiber supporting the higher-order modes, TE01, TM01, HE21o, and HE21e, is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observe cavity resonances that exhibit complex, inhomogeneous states of polarization with topological features containi…
▽ More
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry-Pérot fiber cavity with an optical nanofiber supporting the higher-order modes, TE01, TM01, HE21o, and HE21e, is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observe cavity resonances that exhibit complex, inhomogeneous states of polarization with topological features containing Stokes singularities such as C-points, Poincaré vortices, and L-lines. In situ tuning of the intracavity birefringence enables the desired profile and polarization of the cavity mode to be obtained. These findings open new research possibilities for cold atom manipulation and multimode cavity quantum electrodynamics using the evanescent fields of higher-order mode optical nanofibers.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
Fabrication of Optical Nanofibre-Based Cavities using Focussed Ion-Beam Milling -- A Review
Authors:
Priscila Romagnoli,
Maki Maeda,
Jonathan M. Ward,
Viet Giang Truong,
Síle Nic Chormaic
Abstract:
Nanofibre-based optical cavities are particularly useful for quantum optics application, such as the development of integrated single-photon sources, and for studying fundamental light-matter interactions in cavity quantum electrodynamics (cQED). Although several techniques have been used to produce nanofibre-based optical cavities, focussed ion beam (FIB) milling is becoming popular; it can be us…
▽ More
Nanofibre-based optical cavities are particularly useful for quantum optics application, such as the development of integrated single-photon sources, and for studying fundamental light-matter interactions in cavity quantum electrodynamics (cQED). Although several techniques have been used to produce nanofibre-based optical cavities, focussed ion beam (FIB) milling is becoming popular; it can be used for the fabrication of complex structures directly in the nanofibre. This technique uses a highly accelerated ion beam to remove atoms from the target material with high resolution. However, it is challenging to mill insulating materials with highly-curved structures and large aspect ratios, such as silica nanofibres, due to charge accumulation in the material that leads to mechanical vibrations and misalignment issues. In this article, we highlight the main features of nanofibres and briefly review cQED with nanofibre-based optical cavities. An overview of the milling process is given with a summary of different FIB milled devices and their applications. Finally, we present our technique to produce nanofibre cavities by FIB milling. To overcome the aforementioned challenges, we present a specially designed base plate with an indium tin oxide (ITO)-coated Si substrate and outline our procedure, which improves stability during milling and increases repeatability.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Tailored joint fabrication process derived ultra-low resistance MgB2 superconducting joint
Authors:
Dipak Patel,
Akiyoshi Matsumotoa,
Hiroaki Kumakura,
Gen Nishijima,
Minoru Maeda,
Su-Hun Kim,
Seyong Choi,
Jung Ho Kim
Abstract:
We report an ultra-low resistance superconducting joint using unreacted multifilament MgB2 wires produced by tailoring the powder compaction pressure within the joint with heat treatment conditions. The joint demonstrated an ultra-low resistance of 5.48 x 10^-15 ohms and critical current (Ic) of 91.3 A at 20 K in self-field. The microstructural and composition studies of the joint revealed cracks…
▽ More
We report an ultra-low resistance superconducting joint using unreacted multifilament MgB2 wires produced by tailoring the powder compaction pressure within the joint with heat treatment conditions. The joint demonstrated an ultra-low resistance of 5.48 x 10^-15 ohms and critical current (Ic) of 91.3 A at 20 K in self-field. The microstructural and composition studies of the joint revealed cracks and a high amount of MgO, respectively. These two features reduced the Ic of the joint to some extent; nevertheless, the joint resistance was not affected by it. Our tailored joining process will play a pivotal role in superconducting joint development.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Aerodynamic ground effect in fruitfly sized insect takeoff
Authors:
Dmitry Kolomenskiy,
Masateru Maeda,
Thomas Engels,
Hao Liu,
Kai Schneider,
Jean-Christophe Nave
Abstract:
Aerodynamic ground effect in flap**-wing insect flight is of importance to comparative morphologies and of interest to the micro-air-vehicle (MAV) community. Recent studies, however, show apparently contradictory results of either some significant extra lift or power savings, or zero ground effect. Here we present a numerical study of fruitfly sized insect takeoff with a specific focus on the si…
▽ More
Aerodynamic ground effect in flap**-wing insect flight is of importance to comparative morphologies and of interest to the micro-air-vehicle (MAV) community. Recent studies, however, show apparently contradictory results of either some significant extra lift or power savings, or zero ground effect. Here we present a numerical study of fruitfly sized insect takeoff with a specific focus on the significance of leg thrust and wing kinematics. Flap**-wing takeoff is studied using numerical modelling and high performance computing. The aerodynamic forces are calculated using a three-dimensional Navier--Stokes solver based on a pseudo-spectral method with volume penalization. It is coupled with a flight dynamics solver that accounts for the body weight, inertia and the leg thrust, while only having two degrees of freedom: the vertical and the longitudinal horizontal displacement. The natural voluntary takeoff of a fruitfly is considered as reference. The parameters of the model are then varied to explore possible effects of interaction between the flap**-wing model and the ground plane. These modified takeoffs include cases with decreased leg thrust parameter, and/or with periodic wing kinematics, constant body pitch angle. The results show that the ground effect during natural voluntary takeoff is negligible. In the modified takeoffs, when the rate of climb is slow, the difference in the aerodynamic forces due to the interaction with the ground is up to 6%. Surprisingly, depending on the kinematics, the difference is either positive or negative, in contrast to the intuition based on the helicopter theory, which suggests positive excess lift. This effect is attributed to unsteady wing-wake interactions. A similar effect is found during hovering.
△ Less
Submitted 25 February, 2016; v1 submitted 17 April, 2015;
originally announced April 2015.
