Showing 1–24 of 24 results for author: Macdonald, M

Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics

Authors: Thomas Gawne, Hannah Bellenbaum, Luke B. Fletcher, Karen Appel, Carsten Baehtz, Victorien Bouffetier, Erik Brambrink, Danielle Brown, Attila Cangi, Adrien Descamps, Sebastian Göde, Nicholas J. Hartley, Marie-Luise Herbert, Philipp Hesselbach, Hauke Höppner, Oliver S. Humphries, Zuzana Konôpková, Alejandro Laso, Björn Lindqvist, Julian Lütgert, Michael J. MacDonald, Mikako Makita, Willow Martin, Mikhail Mishchenko, Zhandos A. Moldabekov , et al. (14 additional authors not shown)

Abstract: Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the sp… ▽ More Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of mosaic crystals and how the broadening varies across the spectrometer. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect on the inferred temperature, and find that it can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 18 pages, 13 figures

Unraveling electronic correlations in warm dense quantum plasmas

Authors: Tobias Dornheim, Tilo Döppner, Panagiotis Tolias, Maximilian Böhme, Luke Fletcher, Thomas Gawne, Frank Graziani, Dominik Kraus, Michael MacDonald, Zhandos Moldabekov, Sebastian Schwalbe, Dirk Gericke, Jan Vorberger

Abstract: The study of matter at extreme densities and temperatures has emerged as a highly active frontier at the interface of plasma physics, material science and quantum chemistry with direct relevance for planetary modeling and inertial confinement fusion. A particular feature of such warm dense matter is the complex interplay of strong Coulomb interactions, quantum effects, and thermal excitations, r… ▽ More The study of matter at extreme densities and temperatures has emerged as a highly active frontier at the interface of plasma physics, material science and quantum chemistry with direct relevance for planetary modeling and inertial confinement fusion. A particular feature of such warm dense matter is the complex interplay of strong Coulomb interactions, quantum effects, and thermal excitations, rendering its rigorous theoretical description a formidable challenge. Here, we report a breakthrough in path integral Monte Carlo simulations that allows us to unravel this intricate interplay for light elements without nodal restrictions. This new capability gives us access to electronic correlations previously unattainable. As an example, we apply our method to strongly compressed beryllium to describe x-ray Thomson scattering (XRTS) data obtained at the National Ignition Facility. We find excellent agreement between simulation and experiment. Our analysis shows an unprecedented level of consistency for independent observations without the need for any empirical input parameters. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Evidence of free-bound transitions in warm dense matter and their impact on equation-of-state measurements

Authors: Maximilian P. Böhme, Luke B. Fletcher, Tilo Döppner, Dominik Kraus, Andrew D. Baczewski, Thomas R. Preston, Michael J. MacDonald, Frank R. Graziani, Zhandos A. Moldabekov, Jan Vorberger, Tobias Dornheim

Abstract: Warm dense matter (WDM) is now routinely created and probed in laboratories around the world, providing unprecedented insights into conditions achieved in stellar atmospheres, planetary interiors, and inertial confinement fusion experiments. However, the interpretation of these experiments is often filtered through models with systematic errors that are difficult to quantify. Due to the simultaneo… ▽ More Warm dense matter (WDM) is now routinely created and probed in laboratories around the world, providing unprecedented insights into conditions achieved in stellar atmospheres, planetary interiors, and inertial confinement fusion experiments. However, the interpretation of these experiments is often filtered through models with systematic errors that are difficult to quantify. Due to the simultaneous presence of quantum degeneracy and thermal excitation, processes in which free electrons are de-excited into thermally unoccupied bound states transferring momentum and energy to a scattered x-ray photon become viable. Here we show that such free-bound transitions are a particular feature of WDM and vanish in the limits of cold and hot temperatures. The inclusion of these processes into the analysis of recent X-ray Thomson Scattering experiments on WDM at the National Ignition Facility and the Linac Coherent Light Source significantly improves model fits, indicating that free-bound transitions have been observed without previously being identified. This interpretation is corroborated by agreement with a recently developed model-free thermometry technique and presents an important step for precisely characterizing and understanding the complex WDM state of matter. △ Less

Submitted 30 June, 2023; originally announced June 2023.

X-ray Thomson scattering absolute intensity from the f-sum rule in the imaginary-time domain

Authors: Tobias Dornheim, Tilo Döppner, Andrew D. Baczewski, Panagiotis Tolias, Maximilian P. Böhme, Zhandos A. Moldabekov, Thomas Gawne, Divyanshu Ranjan, David A. Chapman, Michael J. MacDonald, Thomas R. Preston, Dominik Kraus, Jan Vorberger

Abstract: We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlat… ▽ More We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlations, this new approach opens up the intriguing possibility to extract a plethora of physical properties from the ITCF based on XRTS experiments. △ Less

Submitted 4 March, 2024; v1 submitted 24 May, 2023; originally announced May 2023.

Fabrication of High-Aspect Ratio Nanogratings for Phase-based X-ray Imaging

Authors: Martyna Michalska, Alessandro Rossi, Gasper Kokot, Callum M. Macdonald, Silvia Cipiccia, Peter R. T. Munro, Alessandro Olivo, Ioannis Papakonstantinou

Abstract: Diffractive optical elements such as periodic gratings are fundamental devices in X-ray imaging - a technique that medical, material science and security scans rely upon. Fabrication of such structures with high aspect ratios at the nanoscale creates opportunities to further advance such applications, especially in terms of relaxing X-ray source coherence requirements. This is because typical grat… ▽ More Diffractive optical elements such as periodic gratings are fundamental devices in X-ray imaging - a technique that medical, material science and security scans rely upon. Fabrication of such structures with high aspect ratios at the nanoscale creates opportunities to further advance such applications, especially in terms of relaxing X-ray source coherence requirements. This is because typical grating-based X-ray phase imaging techniques (e.g., Talbot self-imaging) require a coherence length of at least one grating period and ideally longer. In this paper, the fabrication challenges in achieving high aspect-ratio nanogratings filled with gold are addressed by a combination of laser interference and nanoimprint lithography, physical vapor deposition, metal assisted chemical etching (MACE), and electroplating. This relatively simple and cost-efficient approach is unlocked by an innovative post-MACE drying step with hexamethyldisilazane, which effectively minimizes the stiction of the nanostructures. The theoretical limits of the approach are discussed and, experimentally, X-ray nanogratings with aspect ratios >40 demonstrated. Finally, their excellent diffractive abilities are shown when exposed to a hard (12.2 keV) monochromatic x-ray beam at a synchrotron facility, and thus potential applicability in phase-based X-ray imaging. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Comments: 27 pages, 5 figures in main text, plus supporting information

Shock Hugoniot of diamond from 3 to 80 TPa

Authors: Damian C. Swift, Andrea L. Kritcher, Amy Lazicki, James A. Hawreliak, Tilo Doeppner, Heather D. Whitley, Joseph Nilsen, Benjamin Bachmann, Michael MacDonald, Brian Maddox, Natalie Kostinski, Gilbert W. Collins, Siegfried Glenzer, Stephen D. Rothman, Dominik Kraus, Roger W. Falcone

Abstract: The principal Hugoniot of carbon, initially diamond, was measured from 3 to 80 TPa (30 to 800 million atmospheres), the highest pressure ever achieved, using radiography of spherically-converging shocks. The shocks were generated by ablation of a plastic coating by soft x-rays in a laser-heated hohlraum at the National Ignition Facility (NIF). Experiments were performed with low and high drive pow… ▽ More The principal Hugoniot of carbon, initially diamond, was measured from 3 to 80 TPa (30 to 800 million atmospheres), the highest pressure ever achieved, using radiography of spherically-converging shocks. The shocks were generated by ablation of a plastic coating by soft x-rays in a laser-heated hohlraum at the National Ignition Facility (NIF). Experiments were performed with low and high drive powers, spanning different but overlap** pressure ranges. The radius-time history of the shock, and the profile of mass density behind, were determined by profile-matching from a time-resolved x-ray radiograph across the diameter of the sphere. Above ~50 TPa, the heating induced by the shock was great enough to ionize a significant fraction of K-shell electrons, reducing the opacity to the 10.2 keV probe x-rays. The opacity and mass density were deduced simultaneously using the constraint that the total mass of the sample was constant. The Hugoniot and opacity were consistent with density functional theory calculations of the electronic states and equation of state (EOS), and varied significantly from theoretical Hugoniots based on Thomas-Fermi theory. Theoretical models used to predict the compressibility of diamond ablator experiments at the NIF, producing the highest neutron yields so far from inertial confinement fusion experiments, are qualitatively consistent with our EOS measurements but appear to overpredict the compressibility slightly. These measurements help to evaluate theoretical techniques and constrain wide-range EOS models applicable to white dwarf stars, which are the ultimate evolutionary form of at least 97% of stars in the galaxy. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: arXiv admin note: text overlap with arXiv:2203.08891

Report number: LLNL-JRNL-815773

The data-driven future of high energy density physics

Authors: Peter W. Hatfield, Jim A. Gaffney, Gemma J. Anderson, Suzanne Ali, Luca Antonelli, Suzan Başeğmez du Pree, Jonathan Citrin, Marta Fajardo, Patrick Knapp, Brendan Kettle, Bogdan Kustowski, Michael J. MacDonald, Derek Mariscal, Madison E. Martin, Taisuke Nagayama, Charlotte A. J. Palmer, J. Luc Peterson, Steven Rose, J J Ruby, Carl Shneider, Matt J. V. Streeter, Will Trickey, Ben Williams

Abstract: The study of plasma physics under conditions of extreme temperatures, densities and electromagnetic field strengths is significant for our understanding of astrophysics, nuclear fusion and fundamental physics. These extreme physical systems are strongly non-linear and very difficult to understand theoretically or optimize experimentally. Here, we argue that machine learning models and data-driven… ▽ More The study of plasma physics under conditions of extreme temperatures, densities and electromagnetic field strengths is significant for our understanding of astrophysics, nuclear fusion and fundamental physics. These extreme physical systems are strongly non-linear and very difficult to understand theoretically or optimize experimentally. Here, we argue that machine learning models and data-driven methods are in the process of resha** our exploration of these extreme systems that have hitherto proven far too non-linear for human researchers. From a fundamental perspective, our understanding can be helped by the way in which machine learning models can rapidly discover complex interactions in large data sets. From a practical point of view, the newest generation of extreme physics facilities can perform experiments multiple times a second (as opposed to ~daily), moving away from human-based control towards automatic control based on real-time interpretation of diagnostic data and updates of the physics model. To make the most of these emerging opportunities, we advance proposals for the community in terms of research design, training, best practices, and support for synthetic diagnostics and data analysis. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: 14 pages, 4 figures. This work was the result of a meeting at the Lorentz Center, University of Leiden, 13th-17th January 2020. This is a preprint of Hatfield et al., Nature, 593, 7859, 351-361 (2021) https://www.nature.com/articles/s41586-021-03382-w

Journal ref: Nature, 593, 7859, 351-361, 2021

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

High-resolution Laboratory Measurements of K-shell X-ray Line Polarization and Excitation Cross Sections in Heliumlike S XV Ions

Authors: Chintan Shah, Natalie Hell, Antonia Hubbard, Ming Feng Gu, Michael J. MacDonald, Megan E. Eckart, Richard L. Kelley, Caroline A. Kilbourne, Maurice A. Leutenegger, F. Scott Porter, Gregory V. Brown

Abstract: We report measurements of electron-impact excitation cross sections for the strong K-shell n=2-1 transitions in S XV using the LLNL EBIT-I electron beam ion trap, two crystal spectrometers, and the EBIT Calorimeter Spectrometer. The cross sections are determined by direct normalization to the well known cross sections of radiative electron capture, measured simultaneously. Using contemporaneous po… ▽ More We report measurements of electron-impact excitation cross sections for the strong K-shell n=2-1 transitions in S XV using the LLNL EBIT-I electron beam ion trap, two crystal spectrometers, and the EBIT Calorimeter Spectrometer. The cross sections are determined by direct normalization to the well known cross sections of radiative electron capture, measured simultaneously. Using contemporaneous polarization measurements with the two crystal spectrometers, whose dispersion planes are oriented parallel and perpendicular to the electron beam direction, the polarization of the direct excitation line emission is determined, and in turn the isotropic total cross sections are extracted. We further experimentally investigate various line-formation mechanisms, finding that radiative cascades and collisional inner-shell ionization dominate the degree of linear polarization and total line-emission cross sections of the forbidden line $z$. △ Less

Submitted 11 June, 2021; originally announced June 2021.

Comments: 16 Pages, 9 Figures, published in ApJ

Journal ref: The Astrophysical Journal, 914, 34 (2021)

Turbulent flow over transitionally rough surfaces with varying roughness densities

Authors: M. MacDonald, L. Chan, D. Chung, N. Hutchins, A. Ooi

Abstract: We investigate rough-wall turbulent flows through direct numerical simulations of flow over three-dimensional transitionally rough sinusoidal surfaces. The roughness Reynolds number is fixed at $k^+=10$, where $k$ is the sinusoidal semi-amplitude, and the sinusoidal wavelength is varied, resulting in the roughness solidity, $Λ$ (frontal area divided by plan area) ranging from 0.05 to 0.54. The hig… ▽ More We investigate rough-wall turbulent flows through direct numerical simulations of flow over three-dimensional transitionally rough sinusoidal surfaces. The roughness Reynolds number is fixed at $k^+=10$, where $k$ is the sinusoidal semi-amplitude, and the sinusoidal wavelength is varied, resulting in the roughness solidity, $Λ$ (frontal area divided by plan area) ranging from 0.05 to 0.54. The high cost of resolving both the flow around the dense roughness elements and the bulk flow is circumvented by the use of the minimal-span channel technique, recently demonstrated by Chung et al. (J. Fluid Mech., vol. 773, 2015, pp. 418-431) to accurately determine the Hama roughness function, $ΔU^+$. Good agreement of the second-order statistics in the near-wall roughness-affected region between minimal- and full-span rough-wall channels is observed. In the sparse regime of roughness ($Λ\lesssim 0.15$) the roughness function increases with increasing solidity, while in the dense regime the roughness function decreases with increasing solidity. It was found that the dense regime begins when $Λ\gtrsim0.15-$0.18, in agreement with the literature. A model is proposed for the limit of $Λ\rightarrow\infty$, which is a smooth wall located at the crest of the roughness elements. This model assists with interpreting the asymptotic behaviour of the roughness, and the rough-wall data presented in this paper show that the near-wall flow is tending towards this modelled limit. The peak streamwise turbulence intensity, which is associated with the turbulent near-wall cycle, is seen to move increasingly further away from the wall with increasing solidity. In the sparse regime, increasing $Λ$ reduces streamwise turbulent energy associated with the near-wall cycle, while increasing $Λ$ in the dense regime increases turbulent energy [continued]$\ldots$ △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Accepted in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. 804 (2016) 130-161

Direct Numerical Simulation of the Moist Stably Stratified Surface Layer: Turbulence and Fog Formation

Authors: Michael MacDonald, Marcin J. Kurowski, João Teixeira

Abstract: We investigate the effects of condensation and liquid water loading on the stably stratified surface layer, with an eye towards understanding the influence of turbulent mixing on fog formation. Direct numerical simulations (DNS) of dry and moist open channel flows are conducted, where in both a constant cooling rate is applied at the ground to mimic longwave radiative cooling. Depending on the coo… ▽ More We investigate the effects of condensation and liquid water loading on the stably stratified surface layer, with an eye towards understanding the influence of turbulent mixing on fog formation. Direct numerical simulations (DNS) of dry and moist open channel flows are conducted, where in both a constant cooling rate is applied at the ground to mimic longwave radiative cooling. Depending on the cooling rate, it can lead to either turbulent (weakly stable) or laminar (very stable) flows. Compared to the completely dry case, the condensation of liquid water in the moist case enables slightly higher cooling rates to be achieved before leading to turbulence collapse. In the very stable cases, runaway cooling leads to the substantial condensation of liquid water close to the ground and fog (visibility less than 1 km) results over much of the domain. In the weakly stable cases, turbulent mixing narrowly yields visibilities of 1 km close to the ground over a similar time period. However, despite the idealized nature of the system, the present results suggest that turbulence impedes, although will not necessarily inhibit, fog formation. A possible mechanism for fog formation within turbulent flows is identified, wherein regions of increased liquid water content form within the low-speed streaks of the near-wall cycle. These streaks are energized in the moist cases due to reduced dissipation of turbulence kinetic energy compared to the dry case, although in both cases the streaks are less energetic and persistent than in neutrally stratified flow. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Accepted in Boundary-Layer Meteorology

Journal ref: Boundary-Layer Meteorol. 175 (2020) 343-368

Scaling Behavior of a Turbulent Kinetic Energy Closure Scheme for the Stably Stratified Atmosphere: A Steady-State Analysis

Authors: Michael MacDonald, João Teixeira

Abstract: We present a turbulent kinetic energy (TKE) closure scheme for the stably stratified atmosphere in which the mixing lengths for momentum and heat are not parameterized in the same manner. The key difference is that, while the mixing length for heat tends towards the stability independent mixing length for momentum in neutrally stratified conditions, it tends towards one based on the Brunt-Väisälä… ▽ More We present a turbulent kinetic energy (TKE) closure scheme for the stably stratified atmosphere in which the mixing lengths for momentum and heat are not parameterized in the same manner. The key difference is that, while the mixing length for heat tends towards the stability independent mixing length for momentum in neutrally stratified conditions, it tends towards one based on the Brunt-Väisälä time scale and square root of the TKE in the limit of large stability. This enables a unique steady-state solution for TKE to be obtained, which we demonstrate would otherwise be impossible if the mixing lengths were the same. Despite the model's relative simplicity, it is shown to perform reasonably well with observational data from the 1999 Cooperative Atmosphere-Surface Exchange Study (CASES-99) using commonly employed model constants. Analyzing the scaling behavior of the non-dimensional velocity and potential temperature gradients, or of the stability (correction) functions, reveals that for large stability the present model scales in the same manner as the first-order operational scheme of Viterbo et al. (Quart. J. Roy. Meteor. Soc. 125, 2401-2426, 1999). Alternatively, it appears as a blend of two cases of the TKE closure scheme of Baas et al. (Bound.-Layer Meteor. 127, 17-36, 2008). Critically, because a unique steady-state TKE can be obtained, the present model avoids the non-physical behavior identified in one of the cases of Baas et al. (2008). △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Accepted in the Journal of the Atmospheric Sciences

Journal ref: J. Atmos. Sci. 77 (2020) 3161-3170

Direct numerical simulation of high aspect ratio spanwise-aligned bars

Authors: M. MacDonald, A. Ooi, R. García-Mayoral, N. Hutchins, D. Chung

Abstract: We conduct minimal-channel direct numerical simulations of turbulent flow over two-dimensional rectangular bars aligned in the spanwise direction. This roughness has been often described as $d$-type, as the roughness function $ΔU^+$ is thought to depend only on the outer-layer length scale (pipe diameter, channel half height or boundary layer thickness). This is in contrast to conventional enginee… ▽ More We conduct minimal-channel direct numerical simulations of turbulent flow over two-dimensional rectangular bars aligned in the spanwise direction. This roughness has been often described as $d$-type, as the roughness function $ΔU^+$ is thought to depend only on the outer-layer length scale (pipe diameter, channel half height or boundary layer thickness). This is in contrast to conventional engineering rough surfaces, named $k$-type, for which $ΔU^+$ depends on the roughness height, $k$. The minimal-span rough-wall channel is used to circumvent the high cost of simulating high Reynolds number flows, enabling a range of bars with varying aspect ratios to be investigated. The present results show that increasing the trough-to-crest height ($k$) of the roughness while kee** the width between roughness bars, $\mathcal{W}$, fixed in viscous units, results in non-$k$-type behaviour although this does not necessarily indicate $d$-type behaviour. Instead, for deep surfaces with $k/\mathcal{W}\gtrsim 3$, the roughness function appears to depend only on $\mathcal{W}$ in viscous units. In these situations, the flow no longer has any information about how deep the roughness is and instead can only `see' the width of the fluid gap between the bars. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Accepted in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. 843 (2018) 126-155

Efficient inversion strategies for estimating optical properties with Monte Carlo radiative transport models

Authors: Callum M. Macdonald, Simon Arridge, Samuel Powell

Abstract: Indirect imaging problems in biomedical optics generally require repeated evaluation of forward models of radiative transport, for which Monte Carlo is accurate yet computationally costly. We develop a novel approach to reduce this bottleneck which has significant implications for quantitative tomographic imaging in a variety of medical and industrial applications. Using Monte Carlo we compute a f… ▽ More Indirect imaging problems in biomedical optics generally require repeated evaluation of forward models of radiative transport, for which Monte Carlo is accurate yet computationally costly. We develop a novel approach to reduce this bottleneck which has significant implications for quantitative tomographic imaging in a variety of medical and industrial applications. Using Monte Carlo we compute a fully stochastic gradient of an objective function for a given imaging problem. Leveraging techniques from the machine learning community we then adaptively control the accuracy of this gradient throughout the iterative inversion scheme, in order to substantially reduce computational resources at each step. For example problems of Quantitative Photoacoustic Tomography and Ultrasound Modulated Optical Tomography, we demonstrate that solutions are attainable using a total computational expense that is comparable to (or less than) that which is required for a single high accuracy forward run of the same Monte Carlo model. This approach demonstrates significant computational savings when approaching the full non-linear inverse problem of optical property estimation using stochastic methods. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 24 Pages, 11 figures

Network Communities of Dynamical Influence

Authors: Ruaridh Clark, Giuliano Punzo, Malcolm Macdonald

Abstract: Fuelled by a desire for greater connectivity, networked systems now pervade our society at an unprecedented level that will affect it in ways we do not yet understand. In contrast, nature has already developed efficient networks that can instigate rapid response and consensus, when key elements are stimulated. We present a technique for identifying these key elements by investigating the relations… ▽ More Fuelled by a desire for greater connectivity, networked systems now pervade our society at an unprecedented level that will affect it in ways we do not yet understand. In contrast, nature has already developed efficient networks that can instigate rapid response and consensus, when key elements are stimulated. We present a technique for identifying these key elements by investigating the relationships between a system's most dominant eigenvectors. This approach reveals the most effective vertices for leading a network to rapid consensus when stimulated, as well as the communities that form under their dynamical influence. In applying this technique, the effectiveness of starling flocks was found to be due, in part, to the low outdegree of every bird, where increasing the number of outgoing connections can produce a less responsive flock. A larger outdegree also affects the location of the birds with the most influence, where these influentially connected birds become more centrally located and in a poorer position to observe a predator and, hence, instigate an evasion manoeuvre. Finally, the technique was found to be effective in large voxel-wise brain connectomes where subjects can be identified from their influential communities. △ Less

Submitted 5 October, 2019; v1 submitted 27 August, 2019; originally announced August 2019.

Comments: 15 pages, 5 figures

Heat transfer in rough-wall turbulent thermal convection in the ultimate regime

Authors: Michael MacDonald, Nicholas Hutchins, Detlef Lohse, Daniel Chung

Abstract: Heat and momentum transfer in wall-bounded turbulent flow, coupled with the effects of wall-roughness, is one of the outstanding questions in turbulence research. In the standard Rayleigh-Bénard problem for natural thermal convection, it is notoriously difficult to reach the so-called ultimate regime in which the near-wall boundary layers are turbulent. Following the analyses proposed by Kraichnan… ▽ More Heat and momentum transfer in wall-bounded turbulent flow, coupled with the effects of wall-roughness, is one of the outstanding questions in turbulence research. In the standard Rayleigh-Bénard problem for natural thermal convection, it is notoriously difficult to reach the so-called ultimate regime in which the near-wall boundary layers are turbulent. Following the analyses proposed by Kraichnan [Phys. Fluids vol 5., pp. 1374-1389 (1962)] and Grossmann & Lohse [Phys. Fluids vol. 23, pp. 045108 (2011)], we instead utilize recent direct numerical simulations of forced convection over a rough wall in a minimal channel [MacDonald, Hutchins & Chung, J. Fluid Mech. vol. 861, pp. 138--162 (2019)] to directly study these turbulent boundary layers. We focus on the heat transport (in dimensionless form, the Nusselt number $Nu$) or equivalently the heat transfer coefficient (the Stanton number $C_h$). Extending the analyses of Kraichnan and Grossmann & Lohse, we assume logarithmic temperature profiles with a roughness-induced shift to predict an effective scaling of $Nu \sim Ra^{0.42}$, where $Ra$ is the dimensionless temperature difference, corresponding to $C_h \sim Re^{-0.16}$, where $Re$ is the centerline Reynolds number. This is pronouncedly different from the skin-friction coefficient $C_f$, which in the fully rough turbulent regime is independent of $Re$, due to the dominant pressure drag. In rough-wall turbulence the absence of the analog to pressure drag in the temperature advection equation is the origin for the very different scaling properties of the heat transfer as compared to the momentum transfer. This analysis suggests that, unlike momentum transfer, the asymptotic ultimate regime, where $Nu\sim Ra^{1/2}$, will never be reached for heat transfer at finite $Ra$. △ Less

Submitted 4 July, 2019; originally announced July 2019.

Comments: Accepted (In press) as a Rapid Communication in Physical Review Fluids

Roughness effects in turbulent forced convection

Authors: M. MacDonald, N. Hutchins, D. Chung

Abstract: We conducted direct numerical simulations (DNSs) of turbulent flow over three-dimensional sinusoidal roughness in a channel. A passive scalar is present in the flow with Prandtl number $Pr=0.7$, to study heat transfer by forced convection over this rough surface. The minimal channel is used to circumvent the high cost of simulating high Reynolds number flows, which enables a range of rough surface… ▽ More We conducted direct numerical simulations (DNSs) of turbulent flow over three-dimensional sinusoidal roughness in a channel. A passive scalar is present in the flow with Prandtl number $Pr=0.7$, to study heat transfer by forced convection over this rough surface. The minimal channel is used to circumvent the high cost of simulating high Reynolds number flows, which enables a range of rough surfaces to be efficiently simulated. The near-wall temperature profile in the minimal channel agrees well with that of the conventional full-span channel, indicating it can be readily used for heat-transfer studies at a much reduced cost compared to conventional DNS. As the roughness Reynolds number, $k^+$, is increased, the Hama roughness function, $ΔU^+$, increases in the transitionally rough regime before tending towards the fully rough asymptote of $κ_m^{-1}\log(k^+)+C$, where $C$ is a constant that depends on the particular roughness geometry and $κ_m\approx0.4$ is the von Kármán constant. In this fully rough regime, the skin-friction coefficient is constant with bulk Reynolds number, $Re_b$. Meanwhile, the temperature difference between smooth- and rough-wall flows, $ΔΘ^+$, appears to tend towards a constant value, $ΔΘ^+_{FR}$. This corresponds to the Stanton number (the temperature analogue of the skin-friction coefficient) monotonically decreasing with $Re_b$ in the fully rough regime. Using shifted logarithmic velocity and temperature profiles, the heat transfer law as described by the Stanton number in the fully rough regime can be derived once both the equivalent sand-grain roughness $k_s/k$ and the temperature difference $ΔΘ^+_{FR}$ are known. In meteorology, this corresponds to the ratio of momentum and heat transfer roughness lengths, $z_{0m}/z_{0h}$, being linearly proportional to $z_{0m}^+$, the momentum roughness length [continued]... △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: Accepted (In press) in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. 861 (2019) 138-162

Poissonian communications: free space optical data transfer at the few-photon level

Authors: Alexander D. Griffiths, Johannes Herrnsdorf, Christopher Lowe, Malcolm Macdonald, Robert Henderson, Michael J. Strain, Martin D. Dawson

Abstract: Communicating information at the few photon level typically requires some complexity in the transmitter or receiver in order to operate in the presence of noise. This in turn incurs expense in the necessary spatial volume and power consumption of the system. In this work we present a self-synchronised free-space optical communications system based on simple, compact and low power consumption semic… ▽ More Communicating information at the few photon level typically requires some complexity in the transmitter or receiver in order to operate in the presence of noise. This in turn incurs expense in the necessary spatial volume and power consumption of the system. In this work we present a self-synchronised free-space optical communications system based on simple, compact and low power consumption semiconductor devices. A temporal encoding method, implemented using a gallium nitride micro-LED source and a silicon single photon avalanche photo-detector (SPAD) demonstrates data transmission at rates up to 100 kb/s for 8.25 pW received power, corresponding to 27 photons per bit. Furthermore, the signals can be decoded in the presence of both constant and modulated background noise at levels significantly exceeding the signal power. The systems low power consumption and modest electronics requirements are demonstrated employing it as a communications channel between two nano-satellite simulator systems. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Comments: 19 pages, 4 figures, additional supplemetary document

Relativistic electron streaming instabilities modulate proton beams accelerated in laser-plasma interactions

Authors: S. Göde, C. Rödel, K. Zeil, R. Mishra, M. Gauthier, F. Brack, T. Kluge, M. J. MacDonald, J. Metzkes, L. Obst, M. Rehwald, C. Ruyer, H. -P. Schlenvoigt, W. Schumaker, P. Sommer, T. E. Cowan, U. Schramm, S. Glenzer, F. Fiuza

Abstract: We report experimental evidence that multi-MeV protons accelerated in relativistic laser-plasma interactions are modulated by strong filamentary electromagnetic fields. Modulations are observed when a preplasma is developed on the rear side of a $μ$m-scale solid-density hydrogen target. Under such conditions, electromagnetic fields are amplified by the relativistic electron Weibel instability and… ▽ More We report experimental evidence that multi-MeV protons accelerated in relativistic laser-plasma interactions are modulated by strong filamentary electromagnetic fields. Modulations are observed when a preplasma is developed on the rear side of a $μ$m-scale solid-density hydrogen target. Under such conditions, electromagnetic fields are amplified by the relativistic electron Weibel instability and are maximized at the critical density region of the target. The analysis of the spatial profile of the protons indicates the generation of $B>$10 MG and $E>$0.1 MV/$μ$m fields with a $μ$m-scale wavelength. These results are in good agreement with three-dimensional particle-in-cell simulations and analytical estimates, which further confirm that this process is dominant for different target materials provided that a preplasma is formed on the rear side with scale length $\gtrsim 0.13 λ_0 \sqrt{a_0}$. These findings impose important constraints on the preplasma levels required for high-quality proton acceleration for multi-purpose applications. △ Less

Submitted 13 April, 2017; originally announced April 2017.

Comments: Accepted for publication in Physical Review Letters, 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 118, 194801 (2017)

The minimal-span channel for rough-wall turbulent flows

Authors: M. MacDonald, D. Chung, N. Hutchins, L. Chan, A. Ooi, R. García-Mayoral

Abstract: Roughness predominantly alters the near-wall region of turbulent flow while the outer layer remains similar. This makes it a prime candidate for the minimal-span channel, which only captures the near-wall flow by restricting the spanwise channel width to be of the order of a few hundred viscous units. Recently, Chung et al. (J. Fluid Mech., vol. 773, 2015, pp. 418-431) showed that a minimal-span c… ▽ More Roughness predominantly alters the near-wall region of turbulent flow while the outer layer remains similar. This makes it a prime candidate for the minimal-span channel, which only captures the near-wall flow by restricting the spanwise channel width to be of the order of a few hundred viscous units. Recently, Chung et al. (J. Fluid Mech., vol. 773, 2015, pp. 418-431) showed that a minimal-span channel can accurately characterise the hydraulic behaviour of roughness. Following this, we aim to investigate the fundamental dynamics of the minimal-span channel framework with an eye towards further improving performance. The streamwise domain length of the channel is investigated with the minimum length found to be three times the spanwise width or 1000 viscous units, whichever is longer. A half-height (open) channel with slip wall is shown to reproduce the near-wall behaviour seen in a standard channel, but with half the number of grid points. Next, a forcing model is introduced into the outer layer of a half-height channel to reduce the high streamwise velocity. Finally, an investigation is conducted to see if varying the roughness Reynolds number with time is a feasible method for obtaining the full hydraulic behaviour of a rough surface. An empirical costing argument is developed to determine the cost in terms of CPU hours of minimal-span channel simulations a priori. This argument involves counting the number of eddy lifespans in the channel, which is then related to the statistical uncertainty of the streamwise velocity. For a given statistical uncertainty in the roughness function, this can then be used to determine the simulation run time. Following this, a finite-volume code with a body-fitted grid is used to determine the roughness function for square-based pyramids using the above insights. Good agreement with the literature for the same roughness geometry is observed. △ Less

Submitted 2 March, 2017; originally announced March 2017.

Comments: Published in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech., Vol. 816, 2017, pp. 5-42

Reciprocity relation for the vector radiative transport equation and its application to diffuse optical tomography with polarized light

Authors: Ugo Tricoli, Callum M. Macdonald, Anabela Da Silva, Vadim A. Markel

Abstract: We derive a reciprocity relation for vector radiative transport equation (vRTE) that describes propagation of polarized light in multiple-scattering media. We then show how this result, together with translational invariance of a plane-parallel sample, can be used to compute efficiently the sensitivity kernel of diffuse optical tomography (DOT) by Monte Carlo simulations. Numerical examples of pol… ▽ More We derive a reciprocity relation for vector radiative transport equation (vRTE) that describes propagation of polarized light in multiple-scattering media. We then show how this result, together with translational invariance of a plane-parallel sample, can be used to compute efficiently the sensitivity kernel of diffuse optical tomography (DOT) by Monte Carlo simulations. Numerical examples of polarization-selective sensitivity kernels thus computed are given. △ Less

Submitted 14 September, 2016; originally announced September 2016.

Comments: 5 pages, 3 figures

Journal ref: Opt. Lett. 42, 362 (2017)

Ultrafast molecular dynamics of dissociative ionization in OCS probed by soft X-ray synchrotron radiation

Authors: Ali Ramadhan, Benji Wales, Isabelle Gauthier, Reza Karimi, Michael MacDonald, Lucia Zuin, Joe Sanderson

Abstract: Soft X-rays (90-173 eV) from the 3rd generation Canadian Light Source have been used in conjunction with a multi coincidence time and position sensitive detection apparatus to observe the dissociative ionization of OCS. By varying the X-ray energy we can compare dynamics from direct and Auger ionization processes, and access ionization channels which result in two or three body breakup, from 2+ to… ▽ More Soft X-rays (90-173 eV) from the 3rd generation Canadian Light Source have been used in conjunction with a multi coincidence time and position sensitive detection apparatus to observe the dissociative ionization of OCS. By varying the X-ray energy we can compare dynamics from direct and Auger ionization processes, and access ionization channels which result in two or three body breakup, from 2+ to 4+ ionization states. We make several new observations for the 3+ state such as kinetic energy release limited by photon energy, and using Dalitz plots we can see evidence of timescale effects between the direct and Auger ionization process for the first time. Finally, using Dalitz plots for OCS$^{4+}$ we observe for the first time that breakup involving an O$^{2+}$ ion can only proceed from out of equilibrium nuclear arrangement for S(2p) Auger ionization. △ Less

Submitted 15 August, 2016; v1 submitted 28 June, 2016; originally announced June 2016.

Comments: 24 pages, 8 figures, 1 table, 77 references

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 49 215602 (2016)

Circular polarization memory in polydisperse scattering media

Authors: Callum M. Macdonald, Steven L. Jacques, Igor Meglinski

Abstract: We investigate the survival of circularly polarized light in random scattering media. The surprising persistence of this form of polarization has a known dependence on the size and refractive index of scattering particles, however a general description regarding polydisperse media is lacking. Through analysis of Mie theory, we present a means of calculating the magnitude of circular polarization m… ▽ More We investigate the survival of circularly polarized light in random scattering media. The surprising persistence of this form of polarization has a known dependence on the size and refractive index of scattering particles, however a general description regarding polydisperse media is lacking. Through analysis of Mie theory, we present a means of calculating the magnitude of circular polarization memory in complex media, with total generality in the distribution of particle sizes and refractive indices. Quantification of this memory effect enables an alternate pathway towards recovering particle size distribution, based on measurements of diffusing circularly polarized light. △ Less

Submitted 26 February, 2015; originally announced February 2015.

Comments: 5 pages, 4 figures, accepted for Physical Review E

A fast direct numerical simulation method for characterising hydraulic roughness

Authors: Daniel Chung, Leon Chan, Michael MacDonald, Nicholas Hutchins, Andrew Ooi

Abstract: We describe a fast direct numerical simulation (DNS) method that promises to directly characterise the hydraulic roughness of any given rough surface, from the hydraulically smooth to the fully rough regime. The method circumvents the unfavourable computational cost associated with simulating high-Reynolds-number flows by employing minimal-span channels (Jimenez & Moin 1991). Proof-of-concept simu… ▽ More We describe a fast direct numerical simulation (DNS) method that promises to directly characterise the hydraulic roughness of any given rough surface, from the hydraulically smooth to the fully rough regime. The method circumvents the unfavourable computational cost associated with simulating high-Reynolds-number flows by employing minimal-span channels (Jimenez & Moin 1991). Proof-of-concept simulations demonstrate that flows in minimal-span channels are sufficient for capturing the downward velocity shift, that is, the Hama roughness function, predicted by flows in full-span channels. We consider two sets of simulations, first with modelled roughness imposed by body forces, and second with explicit roughness described by roughness-conforming grids. Owing to the minimal cost, we are able to conduct DNSs with increasing roughness Reynolds numbers while maintaining a fixed blockage ratio, as is typical in full-scale applications. The present method promises a practical, fast and accurate tool for characterising hydraulic resistance directly from profilometry data of rough surfaces. △ Less

Submitted 27 May, 2015; v1 submitted 24 February, 2015; originally announced February 2015.

Comments: Published in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. (2015), vol. 773, pp. 418-431