Showing 1–50 of 99 results for author: Müller, R

Acoustic Positioning for Deep Sea Neutrino Telescopes with a System of Piezo Sensors Integrated into Glass Spheres

Authors: A. Albert, S. Alves, M. André, M. Ardid, S. Ardid, J. -J. Aubert, J. Aublin, B. Baret, S. Basa, Y. Becherini, B. Belhorma, M. Bendahman, F. Benfenati, V. Bertin, S. Biagi, J. Boumaaza, M. Bouta, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto, B. Caiffi, D. Calvo, S. Campion , et al. (115 additional authors not shown)

Abstract: Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infras… ▽ More Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infrastructure. The ANTARES neutrino telescope operated from 2006 until 2022 in the Mediterranean Sea at a depth exceeding 2000m. It comprised nearly 900 glass spheres with 432mm diameter and 15mm thickness, equipped with photomultiplier tubes to detect Cherenkov light from tracks of charged elementary particles. In an experimental setup within ANTARES, piezo sensors have been glued to the inside of such - otherwise empty - glass spheres. These sensors recorded signals from acoustic emitters with frequencies from 46545 to 60235Hz. Two waves propagating through the glass sphere are found as a result of the excitation by the waves in the water. These can be qualitatively associated with symmetric and asymmetric Lamb-like waves of zeroth order: a fast (early) one with $v_e \approx 5$mm/$μ$s and a slow (late) one with $v_\ell \approx 2$mm/$μ$s. Taking these findings into account improves the accuracy of the position calibration. The results can be transferred to the KM3NeT neutrino telescope, currently under construction at multiple sites in the Mediterranean Sea, for which the concept of piezo sensors glued to the inside of glass spheres has been adapted for monitoring the positions of the photomultiplier tubes. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: submitted to "Experimental Astronomy"

Deep Learning Based Event Reconstruction for Cyclotron Radiation Emission Spectroscopy

Authors: A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, R. Cervantes, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, J. K. Gaison, L. Gladstone, M. Grando, M. Guigue, J. Hartse, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, A. Marsteller, C. Matthé, R. Mohiuddin, B. Monreal, E. C. Morrison , et al. (26 additional authors not shown)

Abstract: The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in… ▽ More The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in application, highly efficient and accurate track reconstruction methods are desired. Deep learning convolutional neural networks (CNNs) - particularly suited to deal with information-sparse data and which offer precise foreground localization - may be utilized to extract track properties from measured CRES signals (called events) with relative computational ease. In this work, we develop a novel machine learning based model which operates a CNN and a support vector machine in tandem to perform this reconstruction. A primary application of our method is shown on simulated CRES signals which mimic those of the Project 8 experiment - a novel effort to extract the unknown absolute neutrino mass value from a precise measurement of tritium $β^-$-decay energy spectrum. When compared to a point-clustering based technique used as a baseline, we show a relative gain of 24.1% in event reconstruction efficiency and comparable performance in accuracy of track parameter reconstruction. △ Less

Submitted 5 January, 2024; originally announced February 2024.

Comments: submitted to Machine Learning: Science and Technology

Journal ref: Machine Learning: Science and Technology, 5 (2024) 025026

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Effect of inelastic ion collisions on low-gain avalanche detectors explained by an A_Si-Si_i-defect mode

Authors: Kevin Lauer, Stephanie Reiß, Aaron Flötotto, Katharina Peh, Dominik Bratek, Robin Müller, Dirk Schulze, Wichard Beenken, Erik Hiller, Thomas Ortlepp, Stefan Krischok

Abstract: The acceptor removal phenomenon (ARP), which hampers the functionality of low-gain avalanche detectors (LGAD), is discussed in frame of the A_Si-Si_i-defect model. The assumption of fast diffusion of interstitial silicon is shown to be superfluous for the explanation of the B_Si-Si_i-defect formation under irradiation, particular at very low temperatures. The experimentally observed properties of… ▽ More The acceptor removal phenomenon (ARP), which hampers the functionality of low-gain avalanche detectors (LGAD), is discussed in frame of the A_Si-Si_i-defect model. The assumption of fast diffusion of interstitial silicon is shown to be superfluous for the explanation of the B_Si-Si_i-defect formation under irradiation, particular at very low temperatures. The experimentally observed properties of the ARP are explained by the donor properties of the B_Si-Si_i-defect in its ground state. Additionally, low temperature photoluminescence spectra are reported for quenched boron doped silicon showing so far unidentified PL lines, which change due to well-known light-induced degradation (LID) treatments. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Real-time Signal Detection for Cyclotron Radiation Emission Spectroscopy Measurements using Antenna Arrays

Authors: A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, B. T. Foust, J. K. Gaison, M. Grando, J. Hartse, K. M. Heeger, X. Huyan, A. M. Jones, B. J. P. Jones, K. Kazkaz, B. H. LaRoque, M. Li, A. Lindman, A. Marsteller, C. Matthé, R. Mohiuddin, B. Monreal, B. Mucogllava , et al. (26 additional authors not shown)

Abstract: Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for precision measurement of the energies of charged particles, which is being developed by the Project 8 Collaboration to measure the neutrino mass using tritium beta-decay spectroscopy. Project 8 seeks to use the CRES technique to measure the neutrino mass with a sensitivity of 40~meV, requiring a large supply of tritium atoms store… ▽ More Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for precision measurement of the energies of charged particles, which is being developed by the Project 8 Collaboration to measure the neutrino mass using tritium beta-decay spectroscopy. Project 8 seeks to use the CRES technique to measure the neutrino mass with a sensitivity of 40~meV, requiring a large supply of tritium atoms stored in a multi-cubic meter detector volume. Antenna arrays are one potential technology compatible with an experiment of this scale, but the capability of an antenna-based CRES experiment to measure the neutrino mass depends on the efficiency of the signal detection algorithms. In this paper, we develop efficiency models for three signal detection algorithms and compare them using simulations from a prototype antenna-based CRES experiment as a case-study. The algorithms include a power threshold, a matched filter template bank, and a neural network based machine learning approach, which are analyzed in terms of their average detection efficiency and relative computational cost. It is found that significant improvements in detection efficiency and, therefore, neutrino mass sensitivity are achievable, with only a moderate increase in computation cost, by utilizing either the matched filter or machine learning approach in place of a power threshold, which is the baseline signal detection algorithm used in previous CRES experiments by Project 8. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Chaos and COSMOS -- Considerations on QSM methods with multiple and single orientations and effects from local anisotropy

Authors: Dimitrios G. Gkotsoulias, Carsten Jäger, Roland Müller, Tobias Gräßle, Karin M. Olofsson, Torsten Møller, Steve Unwin, Catherine Crockford, Roman M. Wittig, Berkin Bilgic, Harald E. Möller

Abstract: Purpose: Field-to-susceptibility inversion in quantitative susceptibility map** (QSM) is ill-posed and needs numerical stabilization through either regularization or oversampling by acquiring data at three or more object orientations. Calculation Of Susceptibility through Multiple Orientations Sampling (COSMOS) is an established oversampling approach and regarded as QSM gold standard. It achieve… ▽ More Purpose: Field-to-susceptibility inversion in quantitative susceptibility map** (QSM) is ill-posed and needs numerical stabilization through either regularization or oversampling by acquiring data at three or more object orientations. Calculation Of Susceptibility through Multiple Orientations Sampling (COSMOS) is an established oversampling approach and regarded as QSM gold standard. It achieves a well-conditioned inverse problem, requiring rotations by 0°, 60° and 120° in the yz-plane. However, this is impractical in vivo, where head rotations are typically restricted to a range of +-25°. Non-ideal sampling degrades the conditioning with residual streaking artifacts whose mitigation needs further regularization. Moreover, susceptibility anisotropy in white matter is not considered in the COSMOS model, which may introduce additional bias. The current work presents a thorough investigation of these effects in primate brain. Methods: Gradient-recalled echo (GRE) data of an entire fixed chimpanzee brain were acquired at 7 T (350 microns resolution, 10 orientations) including ideal COSMOS sampling and realistic rotations in vivo. Comparisons of the results included ideal COSMOS, in-vivo feasible acquisitions with 3-8 orientations and single-orientation iLSQR QSM. Results: In-vivo feasible and optimal COSMOS yielded high-quality susceptibility maps with increased SNR resulting from averaging multiple acquisitions. COSMOS reconstructions from non-ideal rotations about a single axis required additional L2-regularization to mitigate residual streaking artifacts. Conclusion: In view of unconsidered anisotropy effects, added complexity of the reconstruction, and the general challenge of multi-orientation acquisitions, advantages of sub-optimal COSMOS schemes over regularized single-orientation QSM appear limited in in-vivo settings. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: Text: 2593 words (without legends, references and statements) Abstract: 239 words References: 33 Figures: 4 Tables: 1

Fast non-iterative algorithm for 3D point-cloud holography

Authors: Nathan Tessema Ersaro, Cem Yalcin, Liz Murray, Leyla Kabuli, Laura Waller, Rikky Muller

Abstract: Recently developed iterative and deep learning-based approaches to computer-generated holography (CGH) have been shown to achieve high-quality photorealistic 3D images with spatial light modulators. However, such approaches remain overly cumbersome for patterning sparse collections of target points across a photoresponsive volume in applications including biological microscopy and material process… ▽ More Recently developed iterative and deep learning-based approaches to computer-generated holography (CGH) have been shown to achieve high-quality photorealistic 3D images with spatial light modulators. However, such approaches remain overly cumbersome for patterning sparse collections of target points across a photoresponsive volume in applications including biological microscopy and material processing. Specifically, in addition to requiring heavy computation that cannot accommodate real-time operation in mobile or hardware-light settings, existing sampling-dependent 3D CGH methods preclude the ability to place target points with arbitrary precision, limiting accessible depths to a handful of planes. Accordingly, we present a non-iterative point cloud holography algorithm that employs fast deterministic calculations in order to efficiently allocate patches of SLM pixels to different target points in the 3D volume and spread the patterning of all points across multiple time frames. Compared to a matched-performance implementation of the iterative Gerchberg-Saxton algorithm, our algorithm's relative computation speed advantage was found to increase with SLM pixel count, exceeding 100,000x at 512x512 array format. △ Less

Submitted 7 September, 2023; v1 submitted 21 June, 2023; originally announced June 2023.

Comments: 22 pages, 11 figures, manuscript and supplement

Nano-patterned back-reflector with engineered near-field/far-field light scattering for enhanced light trap** in silicon-based multi-junction solar cells

Authors: Andrea Cordaro, Ralph Müller, Stefan Tabernig, Nico Tucher, Patrick Schygulla, Oliver Höhn, Benedikt Bläsi, Albert Polman

Abstract: Multi-junction solar cells provide a path to overcome the efficiency limits of standard silicon solar cells by harvesting more efficiently a broader range of the solar spectrum. However, Si-based multi-junction architectures are hindered by incomplete harvesting in the near-infrared (near-IR) spectral range, as Si sub-cells have weak absorption close to the band gap. Here, we introduce an integrat… ▽ More Multi-junction solar cells provide a path to overcome the efficiency limits of standard silicon solar cells by harvesting more efficiently a broader range of the solar spectrum. However, Si-based multi-junction architectures are hindered by incomplete harvesting in the near-infrared (near-IR) spectral range, as Si sub-cells have weak absorption close to the band gap. Here, we introduce an integrated near-field/far-field light trap** scheme to enhance the efficiency of silicon-based multi-junction solar cells in the near-IR range. To achieve this, we design a nanopatterned diffractive silver back-reflector featuring a scattering matrix that optimizes trap** of multiply-scattered light into a range of diffraction angles. We minimize reflection to the 0th-order and parasitic plasmonic absorption in the silver by engineering destructive interference in the patterned back contact. Numerical and experimental assessment of the optimal design on the performance of single-junction Si TOPCon solar cells highlights an improved external quantum efficiency (EQE) over a planar back-reflector (+1.52 mA/cm2). Nanopatterned metagrating back-reflectors are fabricated on GaInP/GaInAsP//Si two-terminal triple-junction solar cells via Substrate Conformal Imprint Lithography (SCIL) and characterized optically and electronically, demonstrating a power conversion efficiency improvement of +0.9%abs over the planar reference. Overall, our work demonstrates the potential of nanophotonic light trap** for enhancing the efficiency of silicon-based multi-junction solar cells, paving the way for more efficient and sustainable solar energy technologies. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Contributions from Pilot Projects in Quantum Technology Education as Support Action to Quantum Flagship

Authors: Sergej Faletic, Philipp Bitzenbauer, Maria Bondani, Marilu Chiofalo, Simon Goorney, Kim Krijtenburg-Lewerissa, Oxana Mishina, Rainer Muller, Gesche Pospiech, Ilke Ercan, Massimiliano Malgieri, Avraham Merzel, Marisa Michelini, Pasquale Onorato, Henk Pol, Lorenzo Santi, Zeki Can Seskir, Jacob Sherson, Kirsten Stadermann, Alberto Stefanel, Elif Surer, Kristof Toth, Jorge Yago Malo, Olgas Zabello

Abstract: The GIREP community on teaching and learning quantum physics and the Education section of the Quantum flagship project of the European Union (QTEdu) have brought together different stakeholders in the field of teaching quantum physics on all levels, including outreach. The goal of QTEdu is to pave the way for the training of the future quantum workforce. To this end, it is necessary to understand… ▽ More The GIREP community on teaching and learning quantum physics and the Education section of the Quantum flagship project of the European Union (QTEdu) have brought together different stakeholders in the field of teaching quantum physics on all levels, including outreach. The goal of QTEdu is to pave the way for the training of the future quantum workforce. To this end, it is necessary to understand the needs of the quantum technology (QT) field, make the general public aware of the existence and importance of QT, and introduce quantum physics already in high school, so that high school students can choose QT as their field of study and career. Finally, new university courses need to be established to support emerging specific profiles such as a quantum engineer. In this symposium, four QTEdu pilot projects were brought together to demonstrate how their complementary approaches have worked towards realising the above goals. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Comments: 14 pages, 4 figures

From equilibrium statistical physics under experimental constraints to macroscopic port-Hamiltonian systems

Authors: Judy Najnudel, Thomas Hélie, David Roze, Rémy Muller

Abstract: This paper proposes to build a bridge between microscopic descriptions of matter with internal energy, composed of many fast interacting particles inside an environment, and their port-Hamiltonian (PH) descriptions at macroscopic scale. The environment, assumed to be slow, is modeled through experimental constraints on macroscopic quantities (e.g. energy, particle number, etc), with a partitioning… ▽ More This paper proposes to build a bridge between microscopic descriptions of matter with internal energy, composed of many fast interacting particles inside an environment, and their port-Hamiltonian (PH) descriptions at macroscopic scale. The environment, assumed to be slow, is modeled through experimental constraints on macroscopic quantities (e.g. energy, particle number, etc), with a partitioning into two classes: non fluctuating and fluctuating values. The method to derive the PH macroscopic laws is detailed in several steps and illustrated on two standard cases (ideal gas, Ising ferromagnets). It revisits equilibrium statistical physics with a focus on this partitioning. First, the Boltzmann's principle is used to provide the statistic law of the matter. It defines a macroscopic equilibrium characterized by a scalar value, the entropy, together with thermodynamic quantities emerging from each constraint. Then, the port-Hamiltonian system is derived. The Hamiltonian (macroscopic energy) is derived as a function of the macroscopic state (entropy and the macroscopic quantities associated with the fluctuating class). The ports (flows/efforts) are related to the time-derivative of the state and the Hamiltonian gradient in a conservative way. This open system defines the reversible laws that govern standard thermodynamic quantities. Lastly, this paper presents a strategy to extend this PH system to an irreversible conservative one, given a macroscopic dissipative law. △ Less

Submitted 13 January, 2023; originally announced January 2023.

A Lattice Boltzmann Method for Elastic Solids Under Plane Strain Deformation

Authors: Alexander Schlüter, Henning Müller, Sikang Yan, Erik Faust, Ralf Müller

Abstract: The Lattice Boltzmann Method (LBM), e.g. in [ 1] and [2 ], can be interpreted as an alternative method for the numerical solution of partial differential equations. Consequently, although the LBM is usually applied to solve fluid flows, the above interpretation of the LBM as a general numerical tool, allows the LBM to be extended to solid mechanics as well. In this spirit, the LBM has been studied… ▽ More The Lattice Boltzmann Method (LBM), e.g. in [ 1] and [2 ], can be interpreted as an alternative method for the numerical solution of partial differential equations. Consequently, although the LBM is usually applied to solve fluid flows, the above interpretation of the LBM as a general numerical tool, allows the LBM to be extended to solid mechanics as well. In this spirit, the LBM has been studied in recent years. First publications [3], [4] presented an LBM scheme for the numerical solution of the dynamic behavior of a linear elastic solid under simplified deformation assumptions. For so-called anti-plane shear deformation, the only non-zero displacement component is governed by a two-dimensional wave equation. In this work, an existing LBM for the two-dimensional wave equation is extended to more general plane strain problems. The proposed algorithm reduces the plane strain problem to the solution of two separate wave equations for the volume dilatation and the non-zero component of the rotation vector, respectively. A particular focus is on the implementation of types of boundary conditions that are commonly encountered in engineering practice for solids: Dirichlet and Neumann boundary conditions. Last, several numerical experiments are conducted that highlight the performance of the new LBM in comparison to the Finite Element Method. △ Less

Submitted 31 December, 2022; originally announced January 2023.

Comments: 16 pages, 15 figures

SYNCA: A Synthetic Cyclotron Antenna for the Project 8 Collaboration

Authors: A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, C. Claessens, L. de Viveiros, M. Fertl, J. A. Formaggio, L. Gladstone, M. Grando, J. Hartse, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, C. Matthé, R. Mohiuddin, B. Monreal, R. Mueller, J. A. Nikkel, E. Novitski, N. S. Oblath, J. I. Peña , et al. (20 additional authors not shown)

Abstract: Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is develo** a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenn… ▽ More Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is develo** a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenna array, which surrounds a volume of tritium gas, to detect and measure the cyclotron radiation of the resulting $β$-decay electrons. To validate the feasibility of this method, Project 8 has designed a test stand to benchmark the performance of an antenna array at reconstructing signals that mimic those of genuine CRES events. To generate synthetic CRES events, a novel probe antenna has been developed, which emits radiation with characteristics similar to the cyclotron radiation produced by charged particles in magnetic fields. This paper outlines the design, construction, and characterization of this Synthetic Cyclotron Antenna (SYNCA). Furthermore, we perform a series of measurements that use the SYNCA to test the position reconstruction capabilities of the digital beamforming reconstruction technique. We find that the SYNCA produces radiation with characteristics closely matching those expected for cyclotron radiation and reproduces experimentally the phenomenology of digital beamforming simulations of true CRES signals. △ Less

Submitted 15 December, 2022; originally announced December 2022.

The Future Quantum Workforce: Competences, Requirements and Forecasts

Authors: Franziska Greinert, Rainer Müller, Philipp Bitzenbauer, Malte S. Ubben, Kim-Alessandro Weber

Abstract: With the increasing industrial relevance of new quantum technologies, a well educated quantum workforce becomes increasingly crucial. The foreseeable lack of workforce raises important questions. What are the expectations regarding the future relevance of second generation quantum technologies? What are the requirements for the workforce in the coming quantum industry? Which competences, knowledge… ▽ More With the increasing industrial relevance of new quantum technologies, a well educated quantum workforce becomes increasingly crucial. The foreseeable lack of workforce raises important questions. What are the expectations regarding the future relevance of second generation quantum technologies? What are the requirements for the workforce in the coming quantum industry? Which competences, knowledge and skills should the future employees have? In this paper, we report the results of our study that was aimed at map** requirements and forecasts for the future quantum workforce. Our study consisted of three consecutive survey rounds. In total, we gathered $188$ responses from industry and academic experts across Europe. Our study results served as an input for the development of the European Competence Framework for Quantum Technologies, delivered by the project QTEdu CSA for the European Quantum Flagship. In addition, we will discuss predictions from experts related to the future quantum workforce, including the expected industrial relevance of the main areas of quantum technologies, the need for educational efforts, and the expected influence of quantum technologies on everyday life. △ Less

Submitted 13 April, 2023; v1 submitted 17 August, 2022; originally announced August 2022.

Comments: 19 pages, 10 figures; reviewed version to be published in Phys. Rev. Phys. Educ. Res

Journal ref: Phys. Rev. Phys. Educ. Res. 19, 010137, 5 June 2023

Dynamic Propagation of Mode III Cracks in a Lattice Boltzmann Method for Solids

Authors: Henning Müller, Ali Touil, Alexander Schlüter, Ralf Müller

Abstract: This work presents concepts and algorithms for the simulation of dynamic fractures with a Lattice Boltzmann method (LBM) for linear elastic solids. This LBM has been presented previously and solves the wave equation, which is interpreted as the governing equation for antiplane shear deformation. Besides the steady growth of a crack at a prescribed crack velocity, a fracture criterion based on stre… ▽ More This work presents concepts and algorithms for the simulation of dynamic fractures with a Lattice Boltzmann method (LBM) for linear elastic solids. This LBM has been presented previously and solves the wave equation, which is interpreted as the governing equation for antiplane shear deformation. Besides the steady growth of a crack at a prescribed crack velocity, a fracture criterion based on stress intensity factors (SIF) has been implemented. This is the first time, that crack propagation with a mechanically relevant criterion is regarded in the context of LBMs. Numerical results are examined to validate the proposed method. The concepts of crack propagation introduced here are not limited to mode III cracks or the simplified deformation assumption of antiplane shear. By introducing a rather simple processing step into the existing LBM at the level of individual lattice sites, the overall performance of the LBM is maintained. Our findings underline the validity of the LBM as a numerical tool to simulate solids in general as well as dynamic fractures in particular. △ Less

Submitted 25 October, 2022; v1 submitted 23 June, 2022; originally announced June 2022.

Comments: accepted for publication in Archive of Applied Mechanics

Experimental measurement of respiratory particles dispersed by wind instruments and analysis of the associated risk of infection transmission

Authors: Oliver Schlenczek, Birte Thiede, Laura Turco, Katja Stieger, Jana M. Kosub, Rudolf Müller, Simone Scheithauer, Eberhard Bodenschatz, Gholamhossein Bagheri

Abstract: Activities such as singing or playing a wind instrument release respiratory particles into the air that may contain pathogens and thus pose a risk for infection transmission. Here we report measurements of the size distribution, number, and volume concentration of exhaled particles from 31 healthy musicians playing 20 types of wind instruments using aerosol spectrometry and in-line holography in a… ▽ More Activities such as singing or playing a wind instrument release respiratory particles into the air that may contain pathogens and thus pose a risk for infection transmission. Here we report measurements of the size distribution, number, and volume concentration of exhaled particles from 31 healthy musicians playing 20 types of wind instruments using aerosol spectrometry and in-line holography in a strictly controlled cleanroom environment. We find that playing wind instruments carries a lower risk of airborne disease transmission than speaking or singing. We attribute this to the fact that the resonators of wind instruments act as filters for particles >10 $μ$m in diameter. We have also measured the size-dependent filtering properties of different types of filters that can be used as instrument masks. Based on these measurements, we calculated the risk of airborne transmission of SARS-CoV-2 in different near- and far-field scenarios with and without masking and/or distancing. We conclude that in all cases where there is a possibility that the musician is infectious, the only safe measure to prevent airborne transmission of the disease is the use of well-fitting and well-filtering masks for the instrument and the susceptible person. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Comments: 46 pages, 13 figures, 1 PDF with Supplementary Information

The Project 8 Neutrino Mass Experiment

Authors: Project 8 Collaboration, A. Ashtari Esfahani, S. Böser, N. Buzinsky, M. C. Carmona-Benitez, C. Claessens, L. de Viveiros, P. J. Doe, S. Enomoto, M. Fertl, J. A. Formaggio, J. K. Gaison, M. Grando, K. M. Heeger, X. Huyan, A. M. Jones, K. Kazkaz, M. Li, A. Lindman, C. Matthé, R. Mohiuddin, B. Monreal, R. Mueller, J. A. Nikkel, E. Novitski , et al. (23 additional authors not shown)

Abstract: Measurements of the $β^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic t… ▽ More Measurements of the $β^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic tritium avoids an irreducible systematic uncertainty associated with the final states populated by the decay of molecular tritium. Project 8 will proceed in a phased approach toward a goal of 40 meV/c$^2$ neutrino-mass sensitivity. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

A cryogenic tracking detector for antihydrogen detection in the AEgIS experiment

Authors: C. Amsler, M. Antonello, A. Belov, G. Bonomi, R. S. Brusa, M. Caccia, A. Camper, R. Caravita, F. Castelli, D. Comparat, G. Consolati, A. Demetrio, L. Di Noto, M. Doser, P. A. Ekman, M. Fani, R. Ferragut, S. Gerber, M. Giammarchi, A. Gligorova, F. Guatieri, P. Hackstock, D. Haider, S. Haider, A. Hinterberger , et al. (33 additional authors not shown)

Abstract: We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room tempe… ▽ More We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room temperature. FACT provides the antiproton/antihydrogen annihilation position information with a few ns timing resolution. We present the hardware and software developments which led to the successful operation of the detector for antihydrogen detection and the results of an antiproton-loss based efficiency assessment. The main background to the antihydrogen signal is that of the positrons im**ing onto the positronium conversion target and creating a large amount of gamma rays which produce a sizeable signal in the MPPCs shortly before the antihydrogen signal is expected. We detail the characterization of this background signal and its impact on the antihydrogen detection efficiency. △ Less

Submitted 6 March, 2022; originally announced March 2022.

Journal ref: NIM A, Volume 960, 21 April 2020, 163637

Fluctuation-induced dynamics of nematic topological defects

Authors: Lasse Bonn, Aleksandra Ardaseva, Romain Mueller, Tyler N. Shendruk, Amin Doostmohammadi

Abstract: Topological defects are increasingly being identified in various biological systems, where their characteristic flow fields and stress patterns are associated with continuous active stress generation by biological entities. Here, using numerical simulations of continuum fluctuating nematohydrodynamics we show that even in the absence of any specific form of active stresses associated with self-pro… ▽ More Topological defects are increasingly being identified in various biological systems, where their characteristic flow fields and stress patterns are associated with continuous active stress generation by biological entities. Here, using numerical simulations of continuum fluctuating nematohydrodynamics we show that even in the absence of any specific form of active stresses associated with self-propulsion, mesoscopic fluctuations in either orientational alignment or hydrodynamics can independently result in flow patterns around topological defects that resemble the ones observed in active systems. Our simulations further show the possibility of extensile- and contractile-like motion of fluctuation-induced positive half-integer topological defects. Remarkably, isotropic stress fields also reproduce the experimentally measured stress patterns around topological defects in epithelia. Our findings further reveal that extensile- or contractile-like flow and stress patterns around fluctuation-induced defects are governed by passive elastic stresses and flow-aligning behavior of the nematics. △ Less

Submitted 10 October, 2022; v1 submitted 14 January, 2022; originally announced January 2022.

A facility for radiation hardness studies based on a medical cyclotron

Authors: John Anders, Saverio Braccini, Tommaso Stefano Carzaniga, Pierluigi Casolaro, Meghranjana Chatterjee, Gaia Dellepiane, Laura Franconi, Lea Halser, Armin Ilg, Isidre Mateu, Federico Meloni, Claudia Merlassino, Antonio Miucci, Roman Müller, Marco Rimoldi, Michele Weber

Abstract: The development of instrumentation for operation in high-radiation environments represents a challenge in various research fields, particularly in particle physics experiments and space missions, and drives an ever-increasing demand for irradiation facilities dedicated to radiation hardness studies. Depending on the application, different needs arise in terms of particle type, energy and dose rate… ▽ More The development of instrumentation for operation in high-radiation environments represents a challenge in various research fields, particularly in particle physics experiments and space missions, and drives an ever-increasing demand for irradiation facilities dedicated to radiation hardness studies. Depending on the application, different needs arise in terms of particle type, energy and dose rate. In this article, we present a versatile installation based on a medical cyclotron located at the Bern University Hospital (Inselspital), which is used as a controlled 18-MeV proton source. This accelerator is used for daily production of medical radioisotopes, as well as for multidisciplinary research, thanks to a 6.5-meter long beam transfer line that terminates in an independent bunker, dedicated only to scientific activities. The facility offers a wide range of proton fluxes, due to an adjustable beam current from approximately 10 pA to the micro-ampere range, together with a series of steering and focusing magnets along the beamline that allow for the beam spot to be focused down to a few mm^2. The beamline can be instrumented with a variety of beam monitoring detectors, collimators, and beam current measurement devices to precisely control the irradiation conditions. The facility also hosts a well equipped laboratory dedicated to the characterisation of samples after irradiation. An experimental validation of the irradiation setup, with proton fluxes ranging from $5\times10^9$ cm$^{-2}$s$^{-1}$ to $4\times10^{11}$ cm$^{-2}$s$^{-1}$, is reported in this article. △ Less

Submitted 22 March, 2022; v1 submitted 11 January, 2022; originally announced January 2022.

Rapid Fabrication of Low Impedance, 3D Dry Electrodes for Physiological Sensing

Authors: Ryan Kaveh, Natalie Tetreault, Karthik Gopalan, Julian Maravilla, Michael Lustig, Rikky Muller, Ana C. Arias

Abstract: Medical electrophysiological sensors that can study the body and diagnose diseases depend on consistently low impedance electrode-skin interfaces. Clinical-standard wet electrodes use hydrogels and skin abrasion to improve the interface and thus the recorded signal quality. These electrodes are challenging to self-administer and impede in-home care. Wearable dry electrodes are more practical; howe… ▽ More Medical electrophysiological sensors that can study the body and diagnose diseases depend on consistently low impedance electrode-skin interfaces. Clinical-standard wet electrodes use hydrogels and skin abrasion to improve the interface and thus the recorded signal quality. These electrodes are challenging to self-administer and impede in-home care. Wearable dry electrodes are more practical; however, they show higher impedances than wet electrodes and are costly to customize. This work presents a fabrication method for rapidly producing low impedance, anatomically fit dry electrodes that do not require hydrogels. By using electroless copper and gold plating with 3D printing, biocompatible electrodes can be optimized for individuals at a fraction of the cost of existing vacuum deposition-based techniques. Example 3D dry electrodes made with this process are evaluated alongside clinical-standard devices in typical scenarios to compare electrical performance and comfort. The resulting dry electrodes exhibited an average electrode-skin impedance of 66.7 kΩ at 50Hz and DC offset of -20 mV without any hydrogel, which, when area normalized, is within the range achieved by wet electrodes without skin abrasion. △ Less

Submitted 27 April, 2022; v1 submitted 10 January, 2022; originally announced January 2022.

A MEMS-based optical scanning system for precise, high-speed neural interfacing

Authors: Cem Yalcin, Nathan Tessema Ersaro, M. Meraj Ghanbari, George Bocchetti, Sina Faraji Alamouti, Nick Antipa, Daniel Lopez, Nicolas C. Pégard, Laura Waller, Rikky Muller

Abstract: Optical scanning is a prevalent technique for optical neural interfaces where light delivery with high spatial and temporal precision is desired. However, due to the sequential nature of point-scanning techniques, the settling time of optical modulators is a major bottleneck for throughput and limits random-access targeting capabilities. While fast lateral scanners exist, commercially available va… ▽ More Optical scanning is a prevalent technique for optical neural interfaces where light delivery with high spatial and temporal precision is desired. However, due to the sequential nature of point-scanning techniques, the settling time of optical modulators is a major bottleneck for throughput and limits random-access targeting capabilities. While fast lateral scanners exist, commercially available varifocal elements are constrained to >3ms settling times, limiting the speed of the overall system to hundreds of Hz. Faster focusing methods exist but cannot combine fast operation and dwelling capability with electrical and optical efficiency. Here, we present a varifocal mirror comprised of an array of piston-motion MEMS micromirrors and a custom driver ASIC, offering fast operation with dwelling capability while maintaining high diffraction efficiency. The ASIC features a reconfigurable nonlinear DAC to simultaneously compensate for the built-in nonlinearity of electrostatic actuators and the global process variations in MEMS mirrors. Experimental results demonstrate a wide continuous swee** range that spans 22 distinctly resolvable depth planes with refresh rates greater than 12 kHz. △ Less

Submitted 7 December, 2021; originally announced December 2021.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Nanobeacon: A time calibration device for the KM3NeT neutrino telescope

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, B. Baret, S. Basegmez du Pree, M. Bendahman, F. Benfenati, E. Berbee, A. M. van den Berg, V. Bertine, S. Biagi, M. Boettcher, M. Bou Cabo , et al. (216 additional authors not shown)

Abstract: The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne… ▽ More The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described. △ Less

Submitted 30 October, 2021; originally announced November 2021.

Playing with a Quantum Computer

Authors: Rainer Müller, Franziska Greinert

Abstract: The high public attention given to quantum computing shows that it is perceived as an interesting topic. We want to utilize this motivating effect for the teaching and learning of quantum physics. Specifically, we want to take advantage of the access to real quantum computers, which various providers make available free of charge. We show a direct and straightforward way to use quantum computers i… ▽ More The high public attention given to quantum computing shows that it is perceived as an interesting topic. We want to utilize this motivating effect for the teaching and learning of quantum physics. Specifically, we want to take advantage of the access to real quantum computers, which various providers make available free of charge. We show a direct and straightforward way to use quantum computers in an introductory course on quantum physics. We use an algorithm that solves a simple and easily understandable problem while providing a quantum advantage. The algorithm we propose is a simple game in which the use of quantum physics offers a winning advantage. The game is called Quantum Penny Flip and was proposed by David A. Meyer back in 1999. It can be easily reformulated to be described by quantum gates. We can therefore use it to teach the programming of a quantum computer. We demonstrate its implementation in IBM's Quantum Composer. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Nonlinearities of King's plot and their dependence on nuclear radii

Authors: Robert A. Müller, Vladimir A. Yerokhin, Anton N. Artemyev, Andrey Surzhykov

Abstract: Investigations of isotope shifts of atomic spectral lines provide insights into nuclear properties. Deviations from the linear dependence of the isotope shifts of two atomic transitions on nuclear parameters, leading to a nonlinearity of the so-called King plot, are actively studied as a possible way of searching for the new physics. In the present work we calculate the King-plot nonlinearities or… ▽ More Investigations of isotope shifts of atomic spectral lines provide insights into nuclear properties. Deviations from the linear dependence of the isotope shifts of two atomic transitions on nuclear parameters, leading to a nonlinearity of the so-called King plot, are actively studied as a possible way of searching for the new physics. In the present work we calculate the King-plot nonlinearities originating from the Standard-Model atomic theory. The calculation is performed both analytically, for a model example applicable for an arbitrary atom, and numerically, for one-electron ions. It is demonstrated that the Standard-Model predictions of the King-plot nonlinearities are hypersensitive to experimental errors of nuclear charge radii. This effect significantly complicates identifications of possible King-plot nonlinearities originating from the new physics. △ Less

Submitted 31 July, 2021; originally announced August 2021.

Journal ref: Phys. Rev. A 104, 020802 (2021)

Sensitivity estimates for diffuse, point-like and extended neutrino sources with KM3NeT/ARCA

Authors: Rasa Muller, Aart Heijboer, Alfonso Garcia Soto, Barbara Caiffi, Matteo Sanguineti, Vladimir Kulikovskiy

Abstract: The identification of cosmic objects emitting high energy neutrinos could provide new insights about the Universe and its active sources. The existence of these cosmic neutrinos has been proven by the IceCube collaboration, but the big question of which sources these neutrinos originate from, remains unanswered. The KM3NeT detector for Astroparticle Research with Cosmics in the Abyss (ARCA), with… ▽ More The identification of cosmic objects emitting high energy neutrinos could provide new insights about the Universe and its active sources. The existence of these cosmic neutrinos has been proven by the IceCube collaboration, but the big question of which sources these neutrinos originate from, remains unanswered. The KM3NeT detector for Astroparticle Research with Cosmics in the Abyss (ARCA), with a cubic kilometer instrumented volume, is currently being built in the Mediterranean Sea. It will excel at identifying cosmic neutrino sources due to its unprecedented angular resolution for muon neutrinos (< 0.2 degree for E > 10 TeV events). KM3NeT has a view of the sky complementary to IceCube, and is sensitive to neutrinos across a wide range of energies. In order to identify the signature of cosmic neutrino sources in the background of atmospheric neutrinos and muons, statistical methods are being developed and tested with Monte-Carlo pseudo experiments. This contribution presents the most recent sensitivity estimates for diffuse, point-like and extended neutrino sources with KM3NeT/ARCA. △ Less

Submitted 2 September, 2021; v1 submitted 27 July, 2021; originally announced July 2021.

Comments: 6 pages, 4 figures, VLVNT 2021 conference proceedings

Studying Bioluminescence Flashes with the ANTARES Deep Sea Neutrino Telescope

Authors: N. Reeb, S. Hutschenreuter, P. Zehetner, T. Ensslin, S. Alves, M. André, M. Anghinolfi, G. Anton, M. Ardid, J. -J. Aubert, J. Aublin, B. Baret, S. Basa, B. Belhorma, M. Bendahman, V. Bertin, S. Biagi, M. Bissinger, J. Boumaaza, M. Bouta, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto , et al. (119 additional authors not shown)

Abstract: We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emissio… ▽ More We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emission of individual organisms, as well as their location and movement. A mathematical model is built to describe the measurement process of underwater neutrino telescopes and the signal generation of the biological organisms. The Metric Gaussian Variational Inference algorithm is used to reconstruct the model parameters using photon counts recorded by the neutrino detectors. We apply this method to synthetic data sets and data collected by the ANTARES neutrino telescope. The telescope is located 40 km off the French coast and fixed to the sea floor at a depth of 2475 m. The runs with synthetic data reveal that we can reliably model the emitted bioluminescent flashes of the organisms. Furthermore, we find that the spatial resolution of the localization of light sources highly depends on the configuration of the telescope. Precise measurements of the efficiencies of the detectors and the attenuation length of the water are crucial to reconstruct the light emission. Finally, the application to ANTARES data reveals the first precise localizations of bioluminescent organisms using neutrino telescope data. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Half-integer and full-integer topological defects in polar active matter: Emergence, crossover, and coexistence

Authors: Aboutaleb Amiri, Romain Mueller, Amin Doostmohammadi

Abstract: The presence and significance of active topological defects is increasingly realised in diverse biological and biomimetic systems. We introduce a continuum model of polar active matter, based on conservation laws and symmetry arguments, that recapitulates both polar and apolar (nematic) features of topological defects in active turbulence. Using numerical simulations of the continuum model, we dem… ▽ More The presence and significance of active topological defects is increasingly realised in diverse biological and biomimetic systems. We introduce a continuum model of polar active matter, based on conservation laws and symmetry arguments, that recapitulates both polar and apolar (nematic) features of topological defects in active turbulence. Using numerical simulations of the continuum model, we demonstrate the emergence of both half- and full-integer topological defects in polar active matter. Interestingly, we find that crossover from active turbulence with half- to full-integer defects can emerge with the coexistence region characterized by both defect types. These results put forward a minimal, generic framework for studying topological defect patterns in active matter which is capable of explaining the emergence of half-integer defects in polar systems such as bacteria and cell monolayers, as well as predicting the emergence of coexisting defect states in active matter. △ Less

Submitted 6 June, 2021; originally announced June 2021.

Photo-switchable nanoripples in Ti3C2Tx MXene

Authors: Mikhail Volkov, Elena Willinger, Denis A. Kuznetsov, Christoph R. Mueller, Alexey Fedorov, Peter Baum

Abstract: MXenes are two-dimensional materials with a rich set of remarkable chemical and electromagnetic properties, the latter including saturable absorption and intense surface plasmon resonances. To fully harness the functionality of MXenes for applications in optics, electronics and sensing, it is important to understand the interaction of light with MXenes on atomic and femtosecond dimensions. Here, w… ▽ More MXenes are two-dimensional materials with a rich set of remarkable chemical and electromagnetic properties, the latter including saturable absorption and intense surface plasmon resonances. To fully harness the functionality of MXenes for applications in optics, electronics and sensing, it is important to understand the interaction of light with MXenes on atomic and femtosecond dimensions. Here, we use ultrafast electron diffraction and high-resolution electron microscopy to investigate the laser-induced structural dynamics of Ti3C2Tx nanosheets. We find an exceptionally fast lattice response with an electron-phonon coupling time of 230 femtoseconds. Repetitive femtosecond laser excitation transforms Ti3C2Tx through a structural transition into a metamaterial with deeply sub-wavelength nanoripples that are aligned with the laser polarization. By a further laser illumination, the material is reversibly photo-switchable between a flat and rippled morphology. The resulting nanostructured MXene metamaterial with directional nanoripples is expected to exhibit an anisotropic optical and electronic response as well as an enhanced chemical activity that can be switched on and off by light. △ Less

Submitted 28 April, 2021; originally announced April 2021.

Journal ref: ACS Nano 2021, 15, 9, 14071-14079

Phase field models of active matter

Authors: Romain Mueller, Amin Doostmohammadi

Abstract: We present an overview of phase field modeling of active matter systems as a tool for capturing various aspects of complex and active interfaces. We first describe how interfaces between different phases are characterized in phase field models and provide simple fundamental governing equations that describe their evolution. For a simple model, we then show how physical properties of the interface,… ▽ More We present an overview of phase field modeling of active matter systems as a tool for capturing various aspects of complex and active interfaces. We first describe how interfaces between different phases are characterized in phase field models and provide simple fundamental governing equations that describe their evolution. For a simple model, we then show how physical properties of the interface, such as surface tension and interface thickness, can be recovered from these equations. We then explain how the phase field formulation can be coupled to various active matter realizations and discuss three particular examples of continuum biphasic active matter: active nematic-isotropic interfaces, active matter in viscoelastic environments, and active shells in fluid background. Finally, we describe how multiple phase fields can be used to model active cellular monolayers and present a general framework that can be applied to the study of tissue behaviour and collective migration. △ Less

Submitted 24 February, 2021; v1 submitted 10 February, 2021; originally announced February 2021.

Comments: These are the lecture notes presented at the Initial Numerical Training on Active Matter in a training school for the MSCA-ITN ActiveMatter, (http://active-matter.eu)

Sensitivity to New Physics of Isotope Shift Studies using the Coronal Lines of Highly Charged Calcium Ions

Authors: Nils-Holger Rehbehn, Michael K. Rosner, Hendrik Bekker, Julian C. Berengut, Piet O. Schmidt, Steven A. King, Peter Micke, Ming Feng Gu, Robert Müller, Andrey Surzhykov, José R. Crespo López-Urrutia

Abstract: Promising searches for new physics beyond the current Standard Model (SM) of particle physics are feasible through isotope-shift spectroscopy, which is sensitive to a hypothetical fifth force between the neutrons of the nucleus and the electrons of the shell. Such an interaction would be mediated by a new particle which could in principle be associated with dark matter. In so-called King plots, th… ▽ More Promising searches for new physics beyond the current Standard Model (SM) of particle physics are feasible through isotope-shift spectroscopy, which is sensitive to a hypothetical fifth force between the neutrons of the nucleus and the electrons of the shell. Such an interaction would be mediated by a new particle which could in principle be associated with dark matter. In so-called King plots, the mass-scaled frequency shifts of two optical transitions are plotted against each other for a series of isotopes. Subtle deviations from the expected linearity could reveal such a fifth force. Here, we study experimentally and theoretically six transitions in highly charged ions of Ca, an element with five stable isotopes of zero nuclear spin. Some of the transitions are suitable for upcoming high-precision coherent laser spectroscopy and optical clocks. Our results provide a sufficient number of clock transitions for -- in combination with those of singly charged Ca$^+$ -- application of the generalized King plot method. This will allow future high-precision measurements to remove higher-order SM-related nonlinearities and open a new door to yet more sensitive searches for unknown forces and particles. △ Less

Submitted 29 March, 2021; v1 submitted 3 February, 2021; originally announced February 2021.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. A 103, 040801 (2021)

Quantum physics in secondary school -- milq

Authors: Rainer Müller, Oxana Mishina

Abstract: The milq approach to quantum physics for high schools focuses on the conceptual questions of quantum physics. Students should be given the opportunity to engage with the world view of modern physics. The aim is to achieve a conceptually clear formulation of quantum physics with a minimum of formulas. In order to provide students with verbal tools they can use in discussions and argumentations we f… ▽ More The milq approach to quantum physics for high schools focuses on the conceptual questions of quantum physics. Students should be given the opportunity to engage with the world view of modern physics. The aim is to achieve a conceptually clear formulation of quantum physics with a minimum of formulas. In order to provide students with verbal tools they can use in discussions and argumentations we formulated four "reasoning tools". They help to facilitate qualitative discussions of quantum physics, allow students to predict quantum mechanical effects, and help to avoid learning difficulties. They form a "beginners' axiomatic system" for quantum physics. △ Less

Submitted 16 February, 2021; v1 submitted 30 December, 2020; originally announced December 2020.

Comments: to be published by Springer in "Research and Innovation in Physics Education: Two Sides of the Same Coin.", book series Challenges in Physics Education. Contains: 12 pager, 5 figures, 1 table

Optical Verification Experiments of Sub-scale Starshades

Authors: Anthony Harness, Stuart Shaklan, Phillip Willems, N. Jeremy Kasdin, K. Balasubramanian, Philip Dumont, Victor White, Karl Yee, Rich Muller, Michael Galvin

Abstract: Starshades are a leading technology to enable the detection and spectroscopic characterization of Earth-like exoplanets. In this paper we report on optical experiments of sub-scale starshades that advance critical starlight suppression technologies in preparation for the next generation of space telescopes. These experiments were conducted at the Princeton starshade testbed, an 80 m long enclosure… ▽ More Starshades are a leading technology to enable the detection and spectroscopic characterization of Earth-like exoplanets. In this paper we report on optical experiments of sub-scale starshades that advance critical starlight suppression technologies in preparation for the next generation of space telescopes. These experiments were conducted at the Princeton starshade testbed, an 80 m long enclosure testing 1/1000th scale starshades at a flight-like Fresnel number. We demonstrate 1e-10 contrast at the starshade's geometric inner working angle across 10% of the visible spectrum, with an average contrast at the inner working angle of 2.0e-10 and contrast floor of 2e-11. In addition to these high contrast demonstrations, we validate diffraction models to better than 35% accuracy through tests of intentionally flawed starshades. Overall, this suite of experiments reveals a deviation from scalar diffraction theory due to light propagating through narrow gaps between the starshade petals. We provide a model that accurately captures this effect at contrast levels below 1e-10. The results of these experiments demonstrate that there are no optical impediments to building a starshade that provides sufficient contrast to detect Earth-like exoplanets. This work also sets an upper limit on the effect of unknowns in the diffraction model used to predict starshade performance and set tolerances on the starshade manufacture. △ Less

Submitted 9 November, 2020; originally announced November 2020.

Comments: 67 pages; 25 figures; submitted to Journal of Astronomical Telescopes, Instruments, and Systems

Journal ref: JATIS, Vol. 7, No. 2 (2021)

Vacuum polarization and finite nuclear size effects in the two-photon decay of hydrogen-like ions

Authors: J. Sommerfeldt, R. A. Müller, A. V. Volotka, S. Fritzsche, A. ~Surzhykov

Abstract: The total two-photon decay rate of hydrogen-like ions is studied using relativistic quantum electrodynamics. In particular, we analyse how finite nuclear size and QED vacuum polarization corrections affect the decay rate. To calculate these corrections, a finite basis set method based on $B$-splines is used for the generation of quasi-complete atomic spectra and, hence, of the relativistic Green's… ▽ More The total two-photon decay rate of hydrogen-like ions is studied using relativistic quantum electrodynamics. In particular, we analyse how finite nuclear size and QED vacuum polarization corrections affect the decay rate. To calculate these corrections, a finite basis set method based on $B$-splines is used for the generation of quasi-complete atomic spectra and, hence, of the relativistic Green's function. By making use of this $B$-spline approach, high precision calculations have been performed for the $2s_{1/2} \to 1s_{1/2} + 2γ$ and $2p_{1/2} \to 1s_{1/2} + 2γ$ decay of hydrogen-like ions along the entire isoelectronic sequence. The results of these calculations show that both, QED and finite nuclear size effects, are comparatively weak for the $2s_{1/2} \to 1s_{1/2} + 2γ$ transition. In contrast, they are much more pronounced for the $2p_{1/2}\to 1s_{1/2} + 2γ$ decay, where, for hydrogen-like Uranium, the decay rate is reduced by 0.484% due to the finite nuclear size and enhanced by 0.239% if the vacuum polarization is taken into account. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. A 102, 042811 (2020)

Commissioning of the novel Continuous Angle Multi-Energy Analysis Spectrometer at the Paul Scherrer Institut

Authors: Jakob Lass, Henrik Jacobsen, Kristine M. L. Krighaar, Dieter Graf, Felix Groitl, Frank Herzog, Masako Yamada, Christian Kägi, Raphael Müller, Roman Bürge, Marcel Schild, Manuel S. Lehmann, Alex Bollhalder, Peter Keller, Marek Bartkowiak, Uwe Filges, Urs Greuter, Gerd Theidel, Henrik M. Rønnow, Christof Niedermayer, Daniel G. Mazzone

Abstract: We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (\textbf{C}ontinuous \textbf{A}ngle \textbf{M}ulti-\textbf{E}nergy \textbf{A}nalysis) at the Swiss Spallation Neutron Source (SINQ) at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for an efficient data acquisition of scattered neutrons in the horizontal scattering plane, allowing for… ▽ More We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (\textbf{C}ontinuous \textbf{A}ngle \textbf{M}ulti-\textbf{E}nergy \textbf{A}nalysis) at the Swiss Spallation Neutron Source (SINQ) at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for an efficient data acquisition of scattered neutrons in the horizontal scattering plane, allowing for detailed and rapid map** of low-energy excitations under extreme sample environment conditions. △ Less

Submitted 13 March, 2023; v1 submitted 29 July, 2020; originally announced July 2020.

Journal ref: Review of Scientific Instruments 94, 023302 (2023)

Resonant sequential two-photon ionization of atoms by twisted and plane-wave light

Authors: V. P. Kosheleva, V. A. Zaytsev, R. A. Müller, A. Surzhykov, S. Fritzsche

Abstract: We study the resonant sequential two-photon ionization of neutral atoms by a combination of twisted- and plane-wave light within a fully relativistic framework. In particular, the ionization of an isotropic ensemble of neutral sodium atoms ($Z = 11$) from their ground $3^{2}S_{1/2}$ state via the $3^{2}P_{3/2}$ level is considered. We investigate in details the influence of the kinematic parameter… ▽ More We study the resonant sequential two-photon ionization of neutral atoms by a combination of twisted- and plane-wave light within a fully relativistic framework. In particular, the ionization of an isotropic ensemble of neutral sodium atoms ($Z = 11$) from their ground $3^{2}S_{1/2}$ state via the $3^{2}P_{3/2}$ level is considered. We investigate in details the influence of the kinematic parameters of incoming twisted radiation on the photoelectron angular distribution and the circular dichroism. Moreover we study the influence of the geometry of the process on these quantities. This is performed by changing the propagation directions of the incoming twisted and plane-wave light. It is found that the dependence on the kinematic parameters of the twisted photon is the strongest if the plane-wave and twisted light beams are perpendicular to each other. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. A 102, 063115 (2020)

Optimizing Volumetric Efficiency and Modeling Backscatter Communication in Biosensing Ultrasonic Implants

Authors: Mohammad Meraj Ghanbari, Rikky Muller

Abstract: Ultrasonic backscatter communication has gained popularity in recent years with the advent of deep-tissue sub-mm scale biosensing implants in which piezoceramic (piezo) resonators are used as acoustic antennas. Miniaturization is a key design goal for such implants to reduce tissue displacement and enable minimally invasive implantation techniques. Here, we provide a systematic design approach for… ▽ More Ultrasonic backscatter communication has gained popularity in recent years with the advent of deep-tissue sub-mm scale biosensing implants in which piezoceramic (piezo) resonators are used as acoustic antennas. Miniaturization is a key design goal for such implants to reduce tissue displacement and enable minimally invasive implantation techniques. Here, we provide a systematic design approach for the implant piezo geometry and operation frequency to minimize the overall volume of the implant. Moreover, a critical design aspect of an ultrasonic backscatter communication link is the response of the piezo acoustic reflection coefficient $Γ$ with respect to the variable shunt impedance, $Z_E$, of the implant uplink modulator. Due to the complexity of the piezo governing equations and multi-domain, electro-acoustical nature of the piezo, $Γ(Z_E)$ has often been characterized numerically and the implant uplink modulator has been designed empirically resulting in sub-optimal performance in terms of data rate and linearity. Here, we present a SPICE friendly end-to-end equivalent circuit model of the channel as a piezo-IC co-simulation tool that incorporates inherent path losses present in a typical ultrasonic backscatter channel. The circuit model is then used to simulate the channel transient response in a common CAD tool. To provide further insight into the channel response, we present experimentally validated closed form expressions for $Γ(Z_E)$ under various boundary conditions. These expressions couple $Γ$ to the commonly used Thevenin equivalent circuit model of the piezo, facilitating systematic design and synthesis of ultrasonic backscatter uplink modulators △ Less

Submitted 15 July, 2020; originally announced July 2020.

High-resolution spectroscopy of a quantum dot driven bichromatically by two strong coherent fields

Authors: Chris Gustin, Lukas Hanschke, Katarina Boos, Jonathan R. A. Müller, Malte Kremser, Jonathan J. Finley, Stephen Hughes, Kai Müller

Abstract: We present spectroscopic experiments and theory of a quantum dot driven bichromatically by two strong coherent lasers. In particular, we explore the regime where the drive strengths are substantial enough to merit a general non-perturbative analysis, resulting in a rich higher-order Floquet dressed-state energy structure. We show high resolution spectroscopy measurements with a variety of laser de… ▽ More We present spectroscopic experiments and theory of a quantum dot driven bichromatically by two strong coherent lasers. In particular, we explore the regime where the drive strengths are substantial enough to merit a general non-perturbative analysis, resulting in a rich higher-order Floquet dressed-state energy structure. We show high resolution spectroscopy measurements with a variety of laser detunings performed on a single InGaAs quantum dot, with the resulting features well explained with a time-dependent quantum master equation and Floquet analysis. Notably, driving the quantum dot resonance and one of the subsequent Mollow triplet sidepeaks, we observe the disappearance and subsequent reappearance of the central transition and transition resonant with detuned-laser at high detuned-laser pump strengths and additional higher-order effects, e.g. emission triplets at higher harmonics and signatures of higher order Floquet states. For a similar excitation condition but with an off-resonant primary laser, we observe similar spectral features but with an enhanced inherent spectral asymmetry. △ Less

Submitted 18 January, 2021; v1 submitted 28 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Research 3, 013044 (2021)

A micromirror array with annular partitioning for high-speed random-access axial focusing

Authors: Nathan Tessema Ersumo, Cem Yalcin, Nick Antipa, Nicolas Pegard, Laura Waller, Daniel Lopez, Rikky Muller

Abstract: Dynamic axial focusing functionality has recently experienced widespread incorporation in microscopy, augmented/virtual reality (AR/VR), adaptive optics, and material processing. However, the limitations of existing varifocal tools continue to beset the performance capabilities and operating overhead of the optical systems that mobilize such functionality. The varifocal tools that are the least bu… ▽ More Dynamic axial focusing functionality has recently experienced widespread incorporation in microscopy, augmented/virtual reality (AR/VR), adaptive optics, and material processing. However, the limitations of existing varifocal tools continue to beset the performance capabilities and operating overhead of the optical systems that mobilize such functionality. The varifocal tools that are the least burdensome to drive (ex: liquid crystal, elastomeric or optofluidic lenses) suffer from low (~ 100 Hz) refresh rates. Conversely, the fastest devices sacrifice either critical capabilities such as their dwelling capacity (ex: acoustic gradient lenses or monolithic micromechanical mirrors) or low operating overhead (e.g., deformable mirrors). Here, we present a general-purpose random-access axial focusing device that bridges these previously conflicting features of high speed, dwelling capacity and lightweight drive by employing low-rigidity micromirrors that exploit the robustness of defocusing phase profiles. Geometrically, the device consists of an 8.2 mm diameter array of piston-motion and 48 um-pitch micromirror pixels that provide 2pi phase shifting for wavelengths shorter than 1 100 nm with 10-90 % settling in 64.8 us (i.e., 15.44 kHz refresh rate). The pixels are electrically partitioned into 32 rings for a driving scheme that enables phase-wrapped operation with circular symmetry and requires less than 30 V per channel. Optical experiments demonstrated the array's wide focusing range with a measured ability to target 29 distinct, resolvable depth planes. Overall, the features of the proposed array offer the potential for compact, straightforward methods of tackling bottlenecked applications including high-throughput single-cell targeting in neurobiology and the delivery of dense 3D visual information in AR/VR. △ Less

Submitted 29 September, 2020; v1 submitted 13 June, 2020; originally announced June 2020.

Comments: 38 pages, 8 figures

Journal ref: Light: Science & Applications (2020) 9:183

Active Inter-cellular Forces in Collective Cell Motility

Authors: Guanming Zhang, Romain Mueller, Amin Doostmohammadi, Julia M. Yeomans

Abstract: The collective behaviour of confluent cell sheets is strongly influenced both by polar forces, arising through cytoskeletal propulsion and by active inter-cellular forces, which are mediated by interactions across cell-cell junctions. We use a phase-field model to explore the interplay between these two contributions and compare the dynamics of a cell sheet when the polarity of the cells aligns to… ▽ More The collective behaviour of confluent cell sheets is strongly influenced both by polar forces, arising through cytoskeletal propulsion and by active inter-cellular forces, which are mediated by interactions across cell-cell junctions. We use a phase-field model to explore the interplay between these two contributions and compare the dynamics of a cell sheet when the polarity of the cells aligns to (i) their main axis of elongation, (ii) their velocity, and (iii) when the polarity direction executes a persistent random walk.In all three cases, we observe a sharp transition from a jammed state (where cell rearrangements are strongly suppressed) to a liquid state (where the cells can move freely relative to each other) when either the polar or the inter-cellular forces are increased. In addition, for case (ii) only, we observe an additional dynamical state, flocking (solid or liquid), where the majority of the cells move in the same direction. The flocking state is seen for strong polar forces, but is destroyed as the strength of the inter-cellular activity is increased. △ Less

Submitted 26 May, 2020; originally announced May 2020.

Comments: 15 pages,22 figures

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

Authors: Sebastiano Aiello, Arnauld Albert, Sergio Alves Garre, Zineb Aly, Fabrizio Ameli, Michel Andre, Giorgos Androulakis, Marco Anghinolfi, Mancia Anguita, Gisela Anton, Miquel Ardid, Julien Aublin, Christos Bagatelas, Giancarlo Barbarino, Bruny Baret, Suzan Basegmez du Pree, Meriem Bendahman, Edward Berbee, Vincent Bertin, Simone Biagi, Andrea Biagioni, Matthias Bissinger, Markus Boettcher, Jihad Boumaaza, Mohammed Bouta , et al. (207 additional authors not shown)

Abstract: The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur… ▽ More The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Journal ref: JINST 15 P10005 (2020)

Electrically-driven Acousto-optics and Broadband Non-reciprocity in Silicon Photonics

Authors: Eric A. Kittlaus, William M. Jones, Peter T. Rakich, Nils T. Otterstrom, Richard E. Muller, Mina Rais-Zadeh

Abstract: Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to… ▽ More Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to co-implement with standard integrated photonic circuitry. Notably, despite significant advances in integrated electro-optic modulators, related acousto-optic modulator concepts have remained relatively unexplored in silicon photonics. In this article, we demonstrate direct acousto-optic modulation within silicon waveguides using electrically-driven surface acoustic waves (SAWs). By co-integrating SAW transducers in piezoelectric AlN with a standard silicon-on-insulator photonic platform, we harness silicon's strong elasto-optic effect to mediate linear light-sound coupling. Through lithographic design, acousto-optic phase and single-sideband amplitude modulators in the range of 1-5 GHz are fabricated, exhibiting index modulation strengths comparable to existing electro-optic technologies. Extending this traveling-wave, acousto-optic interaction to cm-scales, we create electrically-driven non-reciprocal modulators in silicon. Non-reciprocal operation bandwidths of >100 GHz and insertion losses <0.6 dB are achieved. Building on these results, we show that unity-efficiency non-reciprocal modulation, necessary for a robust acousto-optic isolator, is within reach. The acousto-optic modulator design is compatible with both CMOS fabrication and existing silicon photonic device technologies. These results represent a promising new approach to implement compact and scalable acousto-optic modulators, frequency-shifters, and non-magnetic optical isolators and circulators in integrated photonic circuits. △ Less

Submitted 2 April, 2020; originally announced April 2020.

Generalized excitation of atomic multipole transitions by twisted light modes

Authors: S. A. -L. Schulz, A. A. Peshkov, R. A. Müller, R. Lange, N. Huntemann, Chr. Tamm, E. Peik, A. Surzhykov

Abstract: A theoretical study is performed for the excitation of a single atom localized in the center of twisted light modes. Here we present the explicit dependence of excitation rates on critical parameters, such as the polarization of light, its orbital angular momentum projection, and the orientation of its propagation axis with respect to the atomic quantization axis. The effect of a spatial spread of… ▽ More A theoretical study is performed for the excitation of a single atom localized in the center of twisted light modes. Here we present the explicit dependence of excitation rates on critical parameters, such as the polarization of light, its orbital angular momentum projection, and the orientation of its propagation axis with respect to the atomic quantization axis. The effect of a spatial spread of the atom is also considered in detail. The expressions for transition rates obtained in this work can be used for any atom of arbitrary electronic configuration. For definiteness we apply them to the specific case of $^{2}S_{1/2} (F=0) \rightarrow\; ^{2}F_{7/2} (F=3, M=0)$ electric octupole (E3) transition in $^{171}$Yb$^{+}$ ion. Our analytical and numerical results are suitable for the analysis and planning of future experiments on the excitation of electric-dipole-forbidden transitions by twisted light modes in optical atomic clocks. △ Less

Submitted 6 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. A 102, 012812 (2020)

Gravitational light deflection in Earth-based laser cavity experiments

Authors: Sebastian Ulbricht, Johannes Dickmann, Robert A. Müller, Stefanie Kroker, Andrey Surzhykov

Abstract: As known from Einstein's theory of general relativity, the propagation of light in the presence of a massive object is affected by gravity. In this work, we discuss whether the effect of gravitational light bending can be observed in Earth-based experiments, using high-finesse optical cavities. In order to do this, we theoretically investigate the dynamics of electromagnetic waves in the spacetime… ▽ More As known from Einstein's theory of general relativity, the propagation of light in the presence of a massive object is affected by gravity. In this work, we discuss whether the effect of gravitational light bending can be observed in Earth-based experiments, using high-finesse optical cavities. In order to do this, we theoretically investigate the dynamics of electromagnetic waves in the spacetime of a homogeneous gravitational field and give an analytical expression for the resulting modifications to Gaussian beam propagation. This theoretical framework is used to calculate the intensity profile at the output of a Fabry-Pérot cavity and to estimate the imprints of Earth's gravity on the cavity output signal. In particular, we found that gravity causes an asymmetry of the output intensity profile. Based on that, we discuss a measurement scheme, that could be realized in facilities like the GEO600 gravitational wave detector and the AEI 10 m detector prototype. △ Less

Submitted 10 July, 2020; v1 submitted 6 February, 2020; originally announced February 2020.

Comments: 7 pages, 5 figures, 1 table

Journal ref: Phys. Rev. D 101, 121501 (2020)

Rydberg-positronium velocity and self-ionization studies in 1T magnetic field and cryogenic environment

Authors: M. Antonello, A. Belov, G. Bonomi R. S. Brusa, M. Caccia, A. Camper, R. Caravita, F. Castelli, D. Comparat, G. Consolati, L. Di Noto, M. Doser, M. Fani, R. Ferragut, J. Fesel, S. Gerber, A. Gligorova, L. T. Glöggler, F. Guatieri, S. Haider, A. Hinterberger, O. Khalidova, D. Krasnicky, V. Lagomarsino, C. Malbrunot, S. Mariazzi , et al. (21 additional authors not shown)

Abstract: We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were pe… ▽ More We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were performed. The velocimetry was done by MCP-imaging of photoionized positronium previously excited to the $n=3$ state. One direction of velocity was measured via Doppler-scan of this $n=3$-line, another direction perpendicular to the former by delaying the exciting laser pulses in a time-of-flight measurement. Self-ionization in the magnetic field due to motional Stark effect was also quantified by using the same MCP-imaging technique for Rydberg positronium with an effective principal quantum number $n_{eff}$ ranging between 14 and 22. We conclude with a discussion about the optimization of our experimental parameters for creating Rydberg-positronium in preparation for an efficient pulsed production of antihydrogen. △ Less

Submitted 22 February, 2022; v1 submitted 11 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. A 102, 013101 (2020)

Modification of multipole transitions by twisted light

Authors: Sabrina. A. -L. Schulz, Stephan Fritzsche, Robert A. Müller, Andrey Surzhykov

Abstract: A theoretical analysis is presented for the excitation of single many-electron atoms and ions by twisted (or vortex) light. Special emphasis is put on excitations that can proceed via several electric and magnetic multipole channels. We argue that the relative strength of these multipoles is very sensitive to the topological charge and kinematic parameters of the incident light and can be strongly… ▽ More A theoretical analysis is presented for the excitation of single many-electron atoms and ions by twisted (or vortex) light. Special emphasis is put on excitations that can proceed via several electric and magnetic multipole channels. We argue that the relative strength of these multipoles is very sensitive to the topological charge and kinematic parameters of the incident light and can be strongly modified with respect to the plane-wave case. Most remarkably, the modification of multipole transitions by twisted radiation can be described by means of a geometrical factor. This factor is independent of the shell structure of a particular target atom and just reflects the properties of the light beam as well as the position of an atom with respect to the vortex axis. An analytical expression for the geometrical factor is derived for Bessel photons and for a realistic experimental situation in which the position of an atom is not well determined. To illustrate the use of the geometrical factor for the analysis of (future) measurements, detailed calculations are presented for the $3s3p \, ^3P_1 \to 3s 3p \, ^1P_1$ excitation in neutral Mg. △ Less

Submitted 25 October, 2019; originally announced October 2019.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. A 100, 043416 (2019)

Non-linear isotope-shift effects in Be-like, B-like, and C-like argon

Authors: V. A. Yerokhin, R. A. Müller, A. Surzhykov, P. Micke, P. O. Schmidt

Abstract: Violation of linearity of the King plot is investigated for a chain of partially stripped argon isotopes. The nonlinearity originates within the Standard Model from subtle contributions to the isotope shifts from next-to-leading order effects, which have never been systematically studied so far. In light atoms these nonlinear effects are dominated by the quadratic nuclear recoil ($\propto 1/M^2$ w… ▽ More Violation of linearity of the King plot is investigated for a chain of partially stripped argon isotopes. The nonlinearity originates within the Standard Model from subtle contributions to the isotope shifts from next-to-leading order effects, which have never been systematically studied so far. In light atoms these nonlinear effects are dominated by the quadratic nuclear recoil ($\propto 1/M^2$ where $M$ is the nuclear mass). Large-scale relativistic calculations of the linear and quadratic mass shift and the field shift are performed for the $2P$ fine-structure transitions in Be-like, B-like, and C-like argon ions. Nonlinearities of the King plots from 5 to 30 kHz are found, which is four orders of magnitude larger than previous estimates in comparable systems. Accurate calculations of these effects are vital for identification of possible nonlinearities originating from physics beyond the Standard Model. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. A 101, 012502 (2020)

Quantum-limited measurements of intensity noise levels in Yb-doped fiber amplifiers

Authors: Alexandra Popp, Victor Distler, Kevin Jaksch, Florian Sedlmeir, Christian R. Müller, Nicoletta Haarlammert, Thomas Schreiber, Christoph Marquardt, Andreas Tünnermann, Gerd Leuchs

Abstract: We investigate the frequency-resolved intensity noise spectrum of an Yb-doped fiber amplifier down to the fundamental limit of quantum noise. We focus on the kHz and low MHz frequency regime with special interest in the region between 1 and 10 kHz. Intensity noise levels up to >60 dB above the shot noise limit are found, revealing great optimization potential. Additionally, two seed lasers with di… ▽ More We investigate the frequency-resolved intensity noise spectrum of an Yb-doped fiber amplifier down to the fundamental limit of quantum noise. We focus on the kHz and low MHz frequency regime with special interest in the region between 1 and 10 kHz. Intensity noise levels up to >60 dB above the shot noise limit are found, revealing great optimization potential. Additionally, two seed lasers with different noise characteristics were amplified, showing that the seed source has a significant impact and should be considered in the design of high power fiber amplifiers. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Journal ref: Appl. Phys. B 126, 130 (2020)

Polarization effects in bound-free pair production

Authors: J. Sommerfeldt, R. A. Müller, A. N. Artemyev, A. Surzhykov

Abstract: We present a theoretical study of bound-free electron-positron pair production in the interaction of $γ$-rays with bare ions. Special attention is paid to the longitudinal polarization of both the emitted positrons and the produced hydrogen-like ions. To evaluate this polarization we employed exact solutions of the relativistic Dirac equation and treat the electron-photon coupling within the frame… ▽ More We present a theoretical study of bound-free electron-positron pair production in the interaction of $γ$-rays with bare ions. Special attention is paid to the longitudinal polarization of both the emitted positrons and the produced hydrogen-like ions. To evaluate this polarization we employed exact solutions of the relativistic Dirac equation and treat the electron-photon coupling within the framework of first-order perturbation theory. Detailed calculations have been performed for both, low- and high-Z ions and for a wide range of photon energies. The results of these calculations suggest that bound-free pair production can be a source of strongly polarized positrons and ions. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. A 100, 042511 (2019)

Distillation of Squeezing using a pulsed engineered PDC source

Authors: Thomas Dirmeier, Johannes Tiedau, Imran Khan, Vahid Ansari, Christian R. Müller, Christine Silberhorn, Christoph Marquardt, Gerd Leuchs

Abstract: Hybrid quantum information processing combines the advantages of discrete and continues variable protocols by realizing protocols consisting of photon counting and homodyne measurements. However, the mode structure of pulsed sources and the properties of the detection schemes often require the use optical filters in order to combine both detection methods in a common experiment. This limits the ef… ▽ More Hybrid quantum information processing combines the advantages of discrete and continues variable protocols by realizing protocols consisting of photon counting and homodyne measurements. However, the mode structure of pulsed sources and the properties of the detection schemes often require the use optical filters in order to combine both detection methods in a common experiment. This limits the efficiency and the overall achievable squeezing of the experiment. In our work, we use photon subtraction to implement the distillation of pulsed squeezed states originating from a genuinely spatially and temporally single-mode parametric down-conversion source in non-linear waveguides. Due to the distillation, we witness an improvement of $0.17~\mathrm{dB}$ from an initial squeezing value of $-1.648 \pm 0.002~\mathrm{dB}$, while achieving a purity of $0.58$, and confirm the non-Gaussianity of the distilled state via the higher-order cumulants. With this, we demonstrate the source's suitability for scalable hybrid quantum network applications with pulsed quantum light. △ Less

Submitted 6 October, 2020; v1 submitted 18 July, 2019; originally announced July 2019.

Comments: $©$ 2020 Optical Society of America. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved

Journal ref: Optics Express Vol. 28, Issue 21, pp. 30784-30796 (2020)

Gravitational effects on geonium and free electron $\mathrm{g}_s$-factor measurements in a Penning trap

Authors: Sebastian Ulbricht, Robert Alexander Müller, Andrey Surzhykov

Abstract: We present a theoretical analysis of an electron confined by a Penning trap, also known as geonium, that is affected by gravity. In particular, we investigate the gravitational influence on the electron dynamics and the electromagnetic field of the trap. We consider the special case of a homogeneous gravitational field, which is represented by Rindler spacetime. In this spacetime the Hamiltonian o… ▽ More We present a theoretical analysis of an electron confined by a Penning trap, also known as geonium, that is affected by gravity. In particular, we investigate the gravitational influence on the electron dynamics and the electromagnetic field of the trap. We consider the special case of a homogeneous gravitational field, which is represented by Rindler spacetime. In this spacetime the Hamiltonian of an electron with anomalous magnetic moment is constructed. Based on this Hamiltonian and the exact solution to Maxwell equations for the field of a Penning trap in Rindler spacetime, we derived the transition energies of geonium up to the relativistic corrections of $1/\mathrm{c}^2$. These transition energies are used to obtain an extension of the well known $\mathrm{g}_s$-factor formula introduced by L. S. Brown and G. Gabrielse [Rev. Mod. Phys. 58, 233 1986]. △ Less

Submitted 23 September, 2019; v1 submitted 2 July, 2019; originally announced July 2019.

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. D 100, 064029 (2019)