-
The New Small Wheel electronics
Authors:
G. Iakovidis,
L. Levinson,
Y. Afik,
C. Alexa,
T. Alexopoulos,
J. Ameel,
D. Amidei,
D. Antrim,
A. Badea,
C. Bakalis,
H. Boterenbrood,
R. S. Brener,
S. Chan,
J. Chapman,
G. Chatzianastasiou,
H. Chen,
M. C. Chu,
R. M. Coliban,
T. Costa de Paiva,
G. de Geronimo,
R. Edgar,
N. Felt,
S. Francescato,
M. Franklin,
T. Geralis
, et al. (77 additional authors not shown)
Abstract:
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector te…
▽ More
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.
△ Less
Submitted 25 May, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
High Rate Studies of the ATLAS sTGC Detector and Optimization of the Filter Circuit on the Input of the Front-End Amplifier
Authors:
Siyuan Sun,
Luca Moleri,
Gerardo Vasquez,
Peter Teterin,
Sabrina Corsetti,
Liang Guan,
Benoit Lefebvre,
Enrique Kajomovitz,
Lorne Levinson,
Nachman Lupu,
Rob McPherson,
Alexander Vdovin,
Rongkun Wang,
Bing Zhou,
Junjie Zhu
Abstract:
The Large Hadron Collider (LHC) at CERN is expected to be upgraded to the High-Luminosity LHC (HL-LHC) by 2029 and achieve instantaneous luminosity around 5 - 7.5 $\times$ 10$^{34}$cm$^{-2}$ s$^{-1}$. This represents a more than 3-4 fold increase in the instantaneous luminosity compared to what has been achieved in Run 2. The New Small Wheel (NSW) upgrade is designed to be able to operate efficien…
▽ More
The Large Hadron Collider (LHC) at CERN is expected to be upgraded to the High-Luminosity LHC (HL-LHC) by 2029 and achieve instantaneous luminosity around 5 - 7.5 $\times$ 10$^{34}$cm$^{-2}$ s$^{-1}$. This represents a more than 3-4 fold increase in the instantaneous luminosity compared to what has been achieved in Run 2. The New Small Wheel (NSW) upgrade is designed to be able to operate efficiently in this high background rate environment. In this article, we summarize multiple performance studies of the small-strip Thin Gap Chamber (sTGC) at high rate using nearly final front-end electronics. We demonstrate that the efficiency versus rate distribution can be well described by an exponential decay with electronics dead-time being the primary cause of loss of efficiency at high rate. We then demonstrate several methods that can decrease the electronics dead-time and therefore minimize efficiency loss. One such method is to install either a pi-network input filter or pull-up resistor to minimize the charge input into the amplifier. We optimized the pi-network capacitance and pull-up resistor resistance using the results from our measurements. The results shown here were not only critical to finalizing the components on the front-end board, but also are critical for setting the optimal operating parameters of the sTGC detector and electronics in the ATLAS cavern.
△ Less
Submitted 17 April, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
A detector-emulation method for realistic readout-electronics tests. A case study of VMM3a ASIC for sTGC detector
Authors:
Luca Moleri,
Nachman Lupu,
Alexander Vdovin,
Enrique Kajomovitz
Abstract:
A detector emulator method has been developed. It allows for testing any readout electronics with realistic detector-like signals under controlled conditions, beyond the limits of any experiment based on radiation sources. It can substitute for expensive test-beam campaigns, or predict their results. The detector emulator is a powerful tool for the engineering of detector concepts, with its capabi…
▽ More
A detector emulator method has been developed. It allows for testing any readout electronics with realistic detector-like signals under controlled conditions, beyond the limits of any experiment based on radiation sources. It can substitute for expensive test-beam campaigns, or predict their results. The detector emulator is a powerful tool for the engineering of detector concepts, with its capability to reproduce any detector signal feature to test the electronics response. Here, the method is applied to the case of the VMM3a ASIC tested with sTGC detector emulated signals. Measurements of charge spectra and muon detection efficiency under intense gamma background are reproduced. The effect of different attenuation circuits is studied.
△ Less
Submitted 6 February, 2022; v1 submitted 22 April, 2021;
originally announced April 2021.
-
Performance of a Full-Size Small-Strip Thin Gap Chamber Prototype for the ATLAS New Small Wheel Muon Upgrade
Authors:
Angel Abusleme,
Camille Bélanger-Champagne,
Alain Bellerive,
Yan Benhammou,
James Botte,
Hadar Cohen,
Merlin Davies,
Yanyan Du,
Lea Gauthier,
Thomas Koffas,
Serguei Kuleshov,
Benoit Lefebvre,
Changyu Li,
Nachman Lupu,
Giora Mikenberg,
Daniel Mori,
Jean-Pierre Ochoa-Ricoux,
Estel Perez Codina,
Sebastien Rettie,
Andree Robichaud-Véronneau,
Rimsky Rojas,
Meir Shoa,
Vladimir Smakhtin,
Bernd Stelzer,
Oliver Stelzer-Chilton
, et al. (10 additional authors not shown)
Abstract:
The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs…
▽ More
The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs will be installed during the LHC long shutdown in 2018/19. Small-Strip Thin Gap Chamber (sTGC) detectors are designed to provide fast trigger and high precision muon tracking under the high luminosity LHC conditions. To validate the design, a full-size prototype sTGC detector of approximately 1.2 $\times$ $1.0\, \mathrm{m}^2$ consisting of four gaps has been constructed. Each gap provides pad, strip and wire readouts. The sTGC intrinsic spatial resolution has been measured in a $32\, \mathrm{GeV}$ pion beam test at Fermilab. At perpendicular incidence angle, single gap position resolutions of about $50\,\mathrm{μm}$ have been obtained, uniform along the sTGC strip and perpendicular wire directions, well within design requirements. Pad readout measurements have been performed in a $130\, \mathrm{GeV}$ muon beam test at CERN. The transition region between readout pads has been found to be $4\,\mathrm{mm}$, and the pads have been found to be fully efficient.
△ Less
Submitted 21 September, 2015;
originally announced September 2015.
-
Position resolution and efficiency measurements with large scale Thin Gap Chambers for the super LHC
Authors:
Nir Amram,
Gideon Bella,
Yan Benhammou,
Marco A. Diaz,
Ehud Duchovni,
Erez Etzion,
Alon Hershenhorn,
Amit Klier,
Nachman Lupu,
Giora Mikenberg,
Dmitry Milstein,
Yonathan Munwes,
Osamu Sasaki,
Meir Shoa,
Vladimir Smakhtin,
Ulrich Volkmann
Abstract:
New developments in Thin Gap Chambers (TGC) detectors to provide fast trigger and high precision muon tracking under sLHC conditions are presented. The modified detectors are shown to stand a high total irradiation dose equivalent to 6 Coulomb/cm of wire, without showing any deterioration in their performance. Two large (1.2 x 0.8 m^2) prototypes containing four gaps, each gap providing pad, strip…
▽ More
New developments in Thin Gap Chambers (TGC) detectors to provide fast trigger and high precision muon tracking under sLHC conditions are presented. The modified detectors are shown to stand a high total irradiation dose equivalent to 6 Coulomb/cm of wire, without showing any deterioration in their performance. Two large (1.2 x 0.8 m^2) prototypes containing four gaps, each gap providing pad, strips and wires readout, with a total thickness of 50 mm, have been constructed. Their local spatial resolution has been measured in a 100 GeV/c muon test beam at CERN. At perpendicular incidence angle, single gap position resolution better than 60 microns has been obtained. For incidence angle of 20 degrees resolution of less than 100 micron was achieved. TGC prototypes were also tested under a flux of 10^5 Hz/cm^2 of 5.5-6.5 MeV neutrons, showing a high efficiency for cosmic muons detection.
△ Less
Submitted 2 June, 2010; v1 submitted 1 June, 2010;
originally announced June 2010.
