-
Parametric scaling of power exhaust in EU-DEMO alternative divertor simulations
Authors:
A. E. Järvinen,
L. Aho-Mantila,
T. Lunt,
F. Subba,
G. Rubino,
L. Xiang
Abstract:
Investigations of parametric scaling of power exhaust in the alternative divertor configuration (ADC) SOLPS-ITER simulation database of the EU-DEMO are conducted and compared to predictions based on the Lengyel model. The Lengyel model overpredicts the necessary argon concentrations for LFS divertor detachment by about a factor of 5-10 relative to the SOLPS-ITER simulations. Therefore, while the L…
▽ More
Investigations of parametric scaling of power exhaust in the alternative divertor configuration (ADC) SOLPS-ITER simulation database of the EU-DEMO are conducted and compared to predictions based on the Lengyel model. The Lengyel model overpredicts the necessary argon concentrations for LFS divertor detachment by about a factor of 5-10 relative to the SOLPS-ITER simulations. Therefore, while the Lengyel model predicts that plasmas with accetable divertor heat loads in EU-DEMO would exceed the tolerable upstream impurity concentrations by a large margin, there are several SOLPS-ITER solutions within an acceptable operational space. The SOLPS-ITER simulations indicate that, unlike assumed by the standard Lengyel model, there are significant heat dissipation mechanisms other than argon radiation, such as cross-field transport, that reduce the role of argon radiation by a factor of 2 to 3. Furthermore, the Lengyel model assumes that the radiation front is powered by parallel heat conduction only, which tends to lead to a narrow radiation front as the radiative efficiency increases strongly with reducing thermal conductivity. As a result, the radiative volume and total impurity radiation are suppressed for a given impurity concentration. However, the SOLPS-ITER simulations indicate that other mechanisms, such as cross-field transport, can compete with parallel heat conduction within the radiative front and increase the radiative volume. Due to these findings, usage of the standard Lengyel model for analyzing scaling between divertor conditions and configurations for devices such as EU-DEMO is strongly discouraged.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Power exhaust and core-divertor compatibility of the baffled snowflake divertor in TCV
Authors:
Sophie Gorno,
Claudia Colandrea,
Olivier Février,
Holger Reimerdes,
Christian Theiler,
Basil P Duval,
Tilmann Lunt,
Harshita Raj,
Umar A Sheikh,
Luke Simons,
Andrew Thornton
Abstract:
A baffled Snowflake Minus Low-Field Side (SF-LFS) is geometrically-optimised in TCV, increasing divertor neutral pressure, to evaluate the roles of divertor closure (comparing with an unbaffled SF-LFS) and magnetic geometry (comparing with a baffled Single Null, SN) in power exhaust and core-divertor compatibility. Ohmically-heated L-mode discharges in deuterium, with a line-averaged core density…
▽ More
A baffled Snowflake Minus Low-Field Side (SF-LFS) is geometrically-optimised in TCV, increasing divertor neutral pressure, to evaluate the roles of divertor closure (comparing with an unbaffled SF-LFS) and magnetic geometry (comparing with a baffled Single Null, SN) in power exhaust and core-divertor compatibility. Ohmically-heated L-mode discharges in deuterium, with a line-averaged core density of approximately 4x10(19) m-3, are seeded with nitrogen to approach detached conditions. Baffles in the SF-LFS configuration are found to reduce the peak outer target heat flux by up to 23%, without significantly affecting the location of the inter-null radiation region or the core-divertor compatibility. When compared to the baffled SN, the baffled SF-LFS exhibits a reduction in outer target heat flux by up to 66% and the ability to balance the strike-point distribution of heat flux. These benefits are less significant with N2 seeding, with similar peak target quantities (such as heat flux, electron temperature and ion flux) and divertor radiated power. Despite a radiating region located farther from the confined plasma for the SF-LFS than the baffled SN, no change in core confinement is observed. Core effective charge even indicates an increase in core impurity penetration for the SF-LFS. These experiments constitute a good reference for detailed model validations and extrapolations, exploring important physics such as core impurity shielding and the dependence of divertor cross-field transport on magnetic geometry.
△ Less
Submitted 23 November, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Spatiotemporal analysis of the runaway distribution function from synchrotron images in an ASDEX Upgrade disruption
Authors:
M. Hoppe,
L. Hesslow,
O. Embreus,
L. Unnerfelt,
G. Papp,
I. Pusztai,
T. Fülöp,
O. Lexell,
T. Lunt,
E. Macusova,
P. J. McCarthy,
G. Pautasso,
G. I. Pokol,
G. Por,
P. Svensson,
the ASDEX Upgrade team,
the EUROfusion MST1 team
Abstract:
Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quenc…
▽ More
Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quench, together with an avalanche runaway tail which has an exponentially decreasing energy spectrum. We find that, although the avalanche component carries the vast majority of the current, it is the high-energy seed remnant that dominates synchrotron emission. With insights from the fluid-kinetic simulations, an analytic model for the evolution of the runaway seed component is developed and used to reconstruct the radial density profile of the RE beam. The analysis shows that the observed change of the synchrotron pattern from circular to crescent shape is caused by a rapid redistribution of the radial profile of the runaway density.
△ Less
Submitted 5 February, 2021; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Recent progress towards a quantitative description of filamentary SOL transport
Authors:
D. Carralero,
M. Siccinio,
M. Komm,
S. A. Artene,
F. A. D'Isa,
J. Adamek,
L. Aho-Mantila,
G. Birkenmeier,
M. Brix,
G. Fuchert,
M. Groth,
T. Lunt,
P. Manz,
J. Madsen,
S. Marsen,
H. W. Müller,
U. Stroth,
H. J. Sun,
N. Vianello,
M. Wischmeier,
E. Wolfrum,
ASDEX Upgrade Team,
COMPASS Team,
JET Contributors,
the EUROfusion MST team
Abstract:
A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collision…
▽ More
A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collisionality is found to be the parameter triggering the transition. A clear reduction of the ion temperature takes place in the far SOL after the transition, both for the background and the filaments. This coincides with a strong variation of the ion temperature distribution, which deviates from Gaussianity and becomes dominated by a strong peak below $5$ eV. The filament transition mechanism triggered by a critical value of collisionality seems to be generally applicable to inter-ELM H-mode plasmas, although a secondary threshold related to deuterium fueling is observed. EMC3-EIRENE simulations of neutral dynamics show that an ionization front near the main chamber wall is formed after the shoulder formation. Finally, a clear increase of SOL opacity to neutrals is observed associated to the shoulder formation. A common SOL transport framework is proposed account for all these results, and their potential implications for future generation devices are discussed.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Solitary magnetic perturbations at the ELM onset
Authors:
RP Wenninger,
H Zohm,
JE Boom,
A Burckhart,
MG Dunne,
R Dux,
T Eich,
R Fischer,
C Fuchs,
M Garcia-Munoz,
V Igochine,
M Hoelzl,
NC Luhmann Jr,
T Lunt,
M Maraschek,
HW Mueller,
HK Park,
PA Schneider,
F Sommer,
W Suttrop,
E Viezzer,
the ASDEX Upgrade Team
Abstract:
Edge localised modes (ELMs) allow maintaining sufficient purity of tokamak H-mode plasmas and thus enable stationary H-mode. On the other hand in a future device ELMs may cause divertor power flux densities far in excess of tolerable material limits. The size of the energy loss per ELM is determined by saturation effects in the non-linear phase of the ELM, which at present is hardly understood. So…
▽ More
Edge localised modes (ELMs) allow maintaining sufficient purity of tokamak H-mode plasmas and thus enable stationary H-mode. On the other hand in a future device ELMs may cause divertor power flux densities far in excess of tolerable material limits. The size of the energy loss per ELM is determined by saturation effects in the non-linear phase of the ELM, which at present is hardly understood. Solitary magnetic perturbations (SMPs) are identified as dominant features in the radial magnetic fluctuations below 100kHz. They are typically observed close (+-0.1ms) to the onset of pedestal erosion. SMPs are field aligned structures rotating in the electron diamagnetic drift direction with perpendicular velocities of about 10km/s. A comparison of perpendicular velocities suggests that the perturbation evoking SMPs is located at or inside the separatrix. Analysis of very pronounced examples showed that the number of peaks per toroidal turn is 1 or 2, which is clearly lower than corresponding numbers in linear stability calculations. In combination with strong peaking of the magnetic signals this results in a solitary appearance resembling modes like palm tree modes, edge snakes or outer modes. This behavior has been quantified as solitariness and correlated to main plasma parameters. SMPs may be considered as a signature of the non-linear ELM-phase originating at the separatrix or further inside. Thus they provide a handle to investigate the transition from linear to non-linear ELM phase. By comparison with data from gas puff imaging processes in the non-linear phase at or inside the separatrix and in the scrape-off-layer (SOL) can be correlated. A connection between the passing of an SMP and the onset of radial filament propagation has been found. Eventually the findings related to SMPs may contribute to a future quantitative understanding of the non-linear ELM evolution.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
