-
TOFHIR2: The readout ASIC of the CMS Barrel MIP Timing Detector
Authors:
E. Albuquerque,
M. Araújo,
A. Benaglia,
A. Boletti,
R. Bugalho,
T. Coutinho,
F. De Guio,
P. Faccioli,
L. Ferramacho,
M. Firlej,
T. Fiutowski,
R. Francisco,
M. Gallinaro,
A. Ghezzi,
J. Hollar,
M. Idzik,
H. Legoinha,
N. Leonardo,
C. Leong,
M. T. Lucchini,
M. Malberti,
G. Marozzo,
G. Da Molin,
J. Moron,
T. Niknejad
, et al. (16 additional authors not shown)
Abstract:
The CMS detector will be upgraded for the HL-LHC to include a MIP Timing Detector (MTD). The MTD will consist of barrel and endcap timing layers, BTL and ETL respectively, providing precision timing of charged particles. The BTL sensors are based on LYSO:Ce scintillation crystals coupled to SiPMs with TOFHIR2 ASICs for the front-end readout. A resolution of 30-60 ps for MIP signals at a rate of 2.…
▽ More
The CMS detector will be upgraded for the HL-LHC to include a MIP Timing Detector (MTD). The MTD will consist of barrel and endcap timing layers, BTL and ETL respectively, providing precision timing of charged particles. The BTL sensors are based on LYSO:Ce scintillation crystals coupled to SiPMs with TOFHIR2 ASICs for the front-end readout. A resolution of 30-60 ps for MIP signals at a rate of 2.5 Mhit/s per channel is expected along the HL-LHC lifetime. We present an overview of the TOFHIR2 requirements and design, simulation results and measurements with TOFHIR2 ASICs. The measurements of TOFHIR2 associated to sensor modules were performed in different test setups using internal test pulses or blue and UV laser pulses emulating the signals expected in the experiment. The measurements show a time resolution of 24 ps initially during Beginning of Operation (BoO) and 58 ps at End of Operation (EoO) conditions, matching well the BTL requirements. We also showed that the time resolution is stable up to the highest expected MIP rate. Extensive radiation tests were performed, both with x-rays and heavy ions, showing that TOFHIR2 is not affected by the radiation environment during the experiment lifetime.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Robust isolated attosecond pulse generation with self-compressed sub-cycle drivers from hollow capillary fibers
Authors:
Marina Fernández Galán,
Javier Serrano,
Enrique Conejero Jarque,
Rocío Borrego-Varillas,
Matteo Lucchini,
Maurizio Reduzzi,
Mauro Nisoli,
Christian Brahms,
John C. Travers,
Carlos Hernández-García,
Julio San Roman
Abstract:
High-order harmonic generation (HHG) arising from the non-perturbative interaction of intense light fields with matter constitutes a well-established tabletop source of coherent extreme-ultraviolet and soft X-ray radiation, which is typically emitted as attosecond pulse trains. However, ultrafast applications increasingly demand isolated attosecond pulses (IAPs), which offer great promise for adva…
▽ More
High-order harmonic generation (HHG) arising from the non-perturbative interaction of intense light fields with matter constitutes a well-established tabletop source of coherent extreme-ultraviolet and soft X-ray radiation, which is typically emitted as attosecond pulse trains. However, ultrafast applications increasingly demand isolated attosecond pulses (IAPs), which offer great promise for advancing precision control of electron dynamics. Yet, the direct generation of IAPs typically requires the synthesis of near-single-cycle intense driving fields, which is technologically challenging. In this work, we theoretically demonstrate a novel scheme for the straightforward and compact generation of IAPs from multi-cycle infrared drivers using hollow capillary fibers (HCFs). Starting from a standard, intense multi-cycle infrared pulse, a light transient is generated by extreme soliton self-compression in a HCF with decreasing pressure, and is subsequently used to drive HHG in a gas target. Owing to the sub-cycle confinement of the HHG process, high-contrast IAPs are continuously emitted almost independently of the carrier-envelope phase (CEP) of the optimally self-compressed drivers. This results in a CEP-robust scheme which is also stable under macroscopic propagation of the high harmonics in a gas target. Our results open the way to a new generation of integrated all-fiber IAP sources, overcoming the efficiency limitations of usual gating techniques for multi-cycle drivers.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Integration of thermo-electric coolers into the CMS MTD SiPM arrays for operation under high neutron fluence
Authors:
A. Bornheim,
W. Lustermann,
K. Stachon,
G. Reales Gutiérrez,
A. Benaglia,
F. De Guio,
A. Ghezzi,
M. T. Lucchini,
M. Malberti,
S. Palluotto,
T. Tabarelli de Fatis,
M. Benettoni,
R. Carlin,
M. Tosi,
R. Rossin,
P. Meridiani,
R. Paramatti,
F. Santanastasio,
J. C. Silva,
J. Varela,
A. Heering,
A. Karneyeu,
Y. Musienko,
M. Wayne,
T. Anderson
, et al. (5 additional authors not shown)
Abstract:
The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in the range of $30-60$ ps using LYSO:Ce crystal arrays read out with Silicon Photomultipliers (SiPMs). A major challenge for the operation of such a detector is the extremely high radiation level, of about…
▽ More
The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in the range of $30-60$ ps using LYSO:Ce crystal arrays read out with Silicon Photomultipliers (SiPMs). A major challenge for the operation of such a detector is the extremely high radiation level, of about $2\times10^{14}$ 1 MeV(Si) Eqv. n/cm$^2$, that will be integrated over a decade of operation of the High Luminosity Large Hadron Collider (HL-LHC). Silicon Photomultipliers exposed to this level of radiation have shown a strong increase in dark count rate and radiation damage effects that also impact their gain and photon detection efficiency. For this reason during operations the whole detector is cooled down to about $-35^{\circ}$C. In this paper we illustrate an innovative and cost-effective solution to mitigate the impact of radiation damage on the timing performance of the detector, by integrating small thermo-electric coolers (TECs) on the back of the SiPM package. This additional feature, fully integrated as part of the SiPM array, enables a further decrease in operating temperature down to about $-45^{\circ}$C. This leads to a reduction by a factor of about two in the dark count rate without requiring additional power budget, since the power required by the TEC is almost entirely offset by a decrease in the power required for the SiPM operation due to leakage current. In addition, the operation of the TECs with reversed polarity during technical stops of the accelerator can raise the temperature of the SiPMs up to $60^{\circ}$C (about $50^{\circ}$C higher than the rest of the detector), thus accelerating the annealing of radiation damage effects and partly recovering the SiPM performance.
△ Less
Submitted 23 August, 2023; v1 submitted 1 June, 2023;
originally announced June 2023.
-
Sub-10 ps time tagging of electromagnetic showers with scintillating glasses and SiPMs
Authors:
Marco T. Lucchini,
Andrea Benaglia,
Stefan Gundacker,
Jack Illare,
Paul Lecoq,
Alfred A. Margaryan,
Ashot A. Margaryan,
Kristof Pauwels,
Etiennette Auffray
Abstract:
The high energy physics community has recently identified an $e^+e^-$ Higgs factory as one of the next-generation collider experiments, following the completion of the High Luminosity LHC program at CERN.The moderate radiation levels expected at such colliders compared to hadron colliders, enable the use of less radiation tolerant but cheaper technologies for the construction of the particle detec…
▽ More
The high energy physics community has recently identified an $e^+e^-$ Higgs factory as one of the next-generation collider experiments, following the completion of the High Luminosity LHC program at CERN.The moderate radiation levels expected at such colliders compared to hadron colliders, enable the use of less radiation tolerant but cheaper technologies for the construction of the particle detectors. This opportunity has triggered a renewed interest in the development of scintillating glasses for the instrumentation of large detector volumes such as homogeneous calorimeters. While the performance of such scintillators remains typically inferior in terms of light yield and radiation tolerance compared to that of many scintillating crystals, substantial progress has been made over the recent years. In this paper we discuss the time resolution of cerium-doped Alkali Free Fluorophosphate scintillating glasses, read-out with silicon photo-multipliers in detecting single charged tracks and at different positions along the longitudinal development of an electromagnetic shower, using respectively 150~GeV pions and 100~GeV electron beams at the CERN SPS H2 beam line. A single sensor time resolution of 14.4~ps and 5-7~ps was measured respectively in the two cases. With such a performance the present technology has the potential to address an emerging requirement of future detectors at collider experiments: measuring the time-of-flight of single charged particles as well as that of neutral particles showering inside the calorimeter and the time development of showers.
△ Less
Submitted 15 March, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Field-driven attosecond photoinjection dynamics in semiconductors
Authors:
Giacomo Inzani,
Lyudmyla Adamska,
Amir Eskandari-asl,
Nicola Di Palo,
Gian Luca Dolso,
Bruno Moio,
Luciano Jacopo D'Onofrio,
Alessio Lamperti,
Alessandro Molle,
Rocío Borrego-Varillas,
Mauro Nisoli,
Stefano Pittalis,
Carlo Andrea Rozzi,
Adolfo Avella,
Matteo Lucchini
Abstract:
The route towards manipulation of the optoelectronic properties of matter beyond the current limits of electronics starts from a comprehensive study of the ultrafast dynamics triggered by interaction with light. Among them, a fundamental role is played by charge photoinjection, a complex process that stems from the interplay of many different physical phenomena, which cannot be easily disentangled…
▽ More
The route towards manipulation of the optoelectronic properties of matter beyond the current limits of electronics starts from a comprehensive study of the ultrafast dynamics triggered by interaction with light. Among them, a fundamental role is played by charge photoinjection, a complex process that stems from the interplay of many different physical phenomena, which cannot be easily disentangled. Single- and multi-photon absorption, diabatic tunnelling, intra-band motion, and field-driven band dressing, all concur in determining the overall excited electron population, dictating the electro-optical properties of a material. Here we investigate ultrafast photoinjection in a prototypical semiconductor (monocrystalline germanium) by using attosecond transient reflection spectroscopy. The precise pump-field characterization ensured by a simultaneous attosecond streaking experiment, in tandem with a comprehensive theoretical approach, allowed us to disentangle the different physical phenomena unfolding at different positions in the reciprocal space and at different timing within the envelope of the pump pulse. Moreover, we found that intra-band phenomena hinder charge injection, in contrast to what was previously observed for resonant, direct band-gap semiconductors. Therefore, besides other known parameters as the central wavelength and peak intensity, our results indicate that the pulse temporal envelope and the local band structure probed by intra-band effects are of key importance to achieve an optimal control over the ultrafast carrier injection process and tailor the complex optical and electronic properties of a semiconductor on the few- to sub-femtosecond time scale.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Spectrally tunable ultrashort monochromatized extreme ultraviolet pulses at 100 kHz
Authors:
Tamás Csizmadia,
Zoltán Filus,
Tímea Grósz,
Peng Ye,
Lénárd Gulyás Oldal,
Massimo De Marco,
Péter Jójárt,
Imre Seres,
Zsolt Bengery,
Barnabás Gilicze,
Matteo Lucchini,
Mauro Nisoli,
Fabio Frassetto,
Fabio Samparisi,
Luca Poletto,
Katalin Varjú,
Subhendu Kahaly,
Balázs Major
Abstract:
We present the experimental realization of spectrally tunable, ultrashort, quasi-monochromatic extreme ultraviolet (XUV) pulses generated at 100 kHz repetition rate in a user-oriented gas high harmonic generation (GHHG) beamline of the Extreme Light Infrastructure - Attosecond Light Pulse Source (ELI ALPS) facility. Versatile spectral and temporal sha** of the XUV pulses are accomplished with a…
▽ More
We present the experimental realization of spectrally tunable, ultrashort, quasi-monochromatic extreme ultraviolet (XUV) pulses generated at 100 kHz repetition rate in a user-oriented gas high harmonic generation (GHHG) beamline of the Extreme Light Infrastructure - Attosecond Light Pulse Source (ELI ALPS) facility. Versatile spectral and temporal sha** of the XUV pulses are accomplished with a double-grating, time-delay compensated monochromator accommodating the two composing stages in a novel, asymmetrical geometry. This configuration supports the achievement of high monochromatic XUV flux (2.8+/-0.9*1e10 photons/s at 39.7 eV selected with 700 meV FWHM bandwidth) combined with ultrashort pulse duration (4.0+/-0.2 fs using 12.1+/-0.6 fs driving pulses) and small spot size (sub-100 um). Focusability, spectral bandwidth, and overall photon flux of the produced radiation were investigated covering a wide range of instrumental configurations. Moreover, complete temporal (intensity and phase) characterization of the few-femtosecond monochromatic XUV pulses - a goal that is difficult to achieve by conventional reconstruction techniques - has been realized using ptychographic algorithm on experimentally recorded XUV-IR pump-probe traces. The presented results contribute to in-situ, time-resolved experiments accessing direct information on the electronic structure dynamics of novel target materials.
△ Less
Submitted 23 February, 2023; v1 submitted 5 November, 2022;
originally announced November 2022.
-
Comparative characterization study of LYSO:Ce crystals for timing applications
Authors:
F. M. Addesa,
P. Barria,
R. Bianco,
M. Campana,
F. Cavallari,
A. Cemmi,
M. Cipriani,
I. Dafinei,
B. ď Orsi,
D. del Re,
M. Diemoz,
G. ď Imperio,
E. Di Marco,
I. Di Sarcina,
M. Enculescu,
E. Longo,
M. T. Lucchini,
F. Marchegiani,
P. Meridiani,
S. Nisi,
G. Organtini,
F. Pandolfi,
R. Paramatti,
V. Pettinacci,
C. Quaranta
, et al. (6 additional authors not shown)
Abstract:
Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors it rapidly became attractive for High Energy Particle Physics (HEP) applications, especially in the frame of high luminosity particle colliders. In this paper, a comprehensive and systematic study of LYSO:Ce (…
▽ More
Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors it rapidly became attractive for High Energy Particle Physics (HEP) applications, especially in the frame of high luminosity particle colliders. In this paper, a comprehensive and systematic study of LYSO:Ce ($[Lu_{(1-x)}Y_x]_2SiO_5$:$Ce$) crystals is presented. It involves for the first time a large number of crystal samples (180) of the same size from a dozen of producers.The study consists of a comparative characterization of LYSO:Ce crystal products available on the market by mechanical, optical and scintillation measurements and aims specifically, to investigate key parameters of timing applications for HEP.
△ Less
Submitted 3 June, 2022; v1 submitted 30 May, 2022;
originally announced May 2022.
-
Controlling Floquet states on ultrashort time scales
Authors:
Matteo Lucchini,
Fabio Medeghini,
Yingxuan Wu,
Federico Vismarra,
Rocío Borrego-Varillas,
Aurora Crego,
Fabio Frassetto,
Luca Poletto,
Shunsuke A. Sato,
Hannes Hübener,
Umberto De Giovannini,
Ángel Rubio,
Mauro Nisoli
Abstract:
The advent of ultrafast laser science offers the unique opportunity to combine Floquet engineering with extreme time resolution, further pushing the optical control of matter into the petahertz domain. However, what is the shortest driving pulse for which Floquet states can be realised remains an unsolved matter, thus limiting the application of Floquet theory to pulses composed by many optical cy…
▽ More
The advent of ultrafast laser science offers the unique opportunity to combine Floquet engineering with extreme time resolution, further pushing the optical control of matter into the petahertz domain. However, what is the shortest driving pulse for which Floquet states can be realised remains an unsolved matter, thus limiting the application of Floquet theory to pulses composed by many optical cycles. Here we ionized Ne atoms with few-femtosecond pulses of selected time duration and show that a Floquet state can be established already within 10 cycles of the driving field. For shorter pulses, down to 2 cycles, the finite lifetime of the driven state can still be explained using an analytical model based on Floquet theory. By demonstrating that the population of the Floquet sidebands can be controlled not only with the driving laser pulse intensity and frequency, but also by its duration, our results add a new lever to the toolbox of Floquet engineering.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Precision timing for collider-experiment-based calorimetry
Authors:
S. V. Chekanov,
F. Simon,
V. Boudry,
W. Chung,
P. W. Gorham,
M. Nguyen,
C. G. Tully,
S. C. Eno,
Y. Lai,
A. V. Kotwal,
S. Ko,
I. Laktineh,
S. Lee,
J. S. H. Lee,
M. T. Lucchini,
R. Prechelt,
H. Yoo,
C. -H Yeh,
S. -S. Yu,
G. S. Varner,
R. Zhu
Abstract:
In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the f…
▽ More
In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the full detector volume, and dedicated timing layers integrated in calorimeter systems. A selection of technologies for the different approaches is also discussed.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Dual-Readout Calorimetry for Future Experiments Probing Fundamental Physics
Authors:
I. Pezzotti,
Harvey Newman,
J. Freeman,
J. Hirschauer,
R. Ferrari,
G. Gaudio,
G. Polesello,
R. Santoro,
M. Lucchini,
S. Giagu,
F. Bedeschi,
Sehwook Lee,
P. Harris,
C. Tully,
A. Jung,
Nural Akchurin,
A. Belloni,
S. Eno,
J. Qian,
B. Zhou,
J. Zhu,
Jason Sang Hun Lee,
I. Vivarelli,
R. Hirosky,
Hwidong Yoo
Abstract:
In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in their active material, dual-readout calorimeters aim to provide additional information on the light produced in the sensitive media via, for example, wavelength and polarization, and/or a precision timing measurements,…
▽ More
In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in their active material, dual-readout calorimeters aim to provide additional information on the light produced in the sensitive media via, for example, wavelength and polarization, and/or a precision timing measurements, allowing an estimation of the shower-by-shower particle content. Utilizing this knowledge of the shower particle content may allow unprecedented energy resolution for hadronic particles and jets and new types of particle flow algorithms. We also discuss the impact continued development of this kind of calorimetry could have on precision on Higgs boson property measurements at future colliders.
△ Less
Submitted 4 May, 2022; v1 submitted 8 March, 2022;
originally announced March 2022.
-
Particle Flow with a Hybrid Segmented Crystal and Fiber Dual-Readout Calorimeter
Authors:
Marco T. Lucchini,
Lorenzo Pezzotti,
Giacomo Polesello,
Christopher G. Tully
Abstract:
In the reconstruction of physics events at future e$^+$e$^-$ colliders the calorimeter design has a crucial role in the overall detector performance. The reconstruction of events with many jets in their final state sets stringent requirements on the jet energy and angular resolutions. The energy resolution for jets with energy of about 45 GeV is required to be at the 4-5\% level to enable an effic…
▽ More
In the reconstruction of physics events at future e$^+$e$^-$ colliders the calorimeter design has a crucial role in the overall detector performance. The reconstruction of events with many jets in their final state sets stringent requirements on the jet energy and angular resolutions. The energy resolution for jets with energy of about 45 GeV is required to be at the 4-5\% level to enable an efficient separation of the W and Z boson invariant masses. We demonstrate in this paper how such a performance can be achieved by exploiting a particle flow algorithm tailored for a hybrid dual-readout calorimeter made of segmented crystals and fibers. The excellent energy resolution and linearity of such calorimeter for both photons and neutral hadrons ($3\%/\sqrt{E}$ and $26\%/\sqrt{E}$, respectively), inherent to the homogeneous crystals and dual-readout technological choices, provides a powerful handle for the development of a new approach for particle identification and jet reconstruction. While the dual-readout particle flow algorithm (DR-PFA) presented in this paper is at its early stage of development, it already demonstrates the potential of a hybrid dual-readout calorimeter for jet reconstruction by improving the jet energy resolution with respect to a calorimeter-only reconstruction from 6.0\% to about 4.5\% for 45 GeV jets.
△ Less
Submitted 29 April, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Reconstruction of ultrafast exciton dynamics with a phase-retrieval algorithm
Authors:
Bruno Moio,
Gian Luca Dolso,
Giacomo Inzani,
Nicola Di Palo,
Shunsuke A. Sato,
Rocío Borrego-Varillas,
Mauro Nisoli,
Matteo Lucchini
Abstract:
The first step to gain optical control over the ultrafast processes initiated by light in solids is a correct identification of the physical mechanisms at play. Among them, exciton formation has been identified as a crucial phenomenon which deeply affects the electro-optical properties of most semiconductors and insulators of technological interest. While recent experiments based on attosecond spe…
▽ More
The first step to gain optical control over the ultrafast processes initiated by light in solids is a correct identification of the physical mechanisms at play. Among them, exciton formation has been identified as a crucial phenomenon which deeply affects the electro-optical properties of most semiconductors and insulators of technological interest. While recent experiments based on attosecond spectroscopy techniques have demonstrated the possibility to observe the early-stage exciton dynamics, the description of the underlying exciton properties remains non-trivial. In this work we propose a new method called extended Ptychographic Iterative engine for eXcitons (ePIX), capable of reconstructing the main physical properties which determine the evolution of the quasi-particle with no prior knowledge of the exact relaxation dynamics or the pump temporal characteristics. By demonstrating its accuracy even when the exciton dynamics is comparable to the pump pulse duration, ePIX is established as a powerful approach to widen our knowledge of solid-state physics.
△ Less
Submitted 17 July, 2021;
originally announced July 2021.
-
Time-frequency map** of two-colour photoemission driven by harmonic radiation
Authors:
Bruno Moio,
Gian Luca Dolso,
Giacomo Inzani,
Nicola Di Palo,
Rocío Borrego-Varillas,
Mauro Nisoli,
Matteo Lucchini
Abstract:
The use of few-femtosecond, extreme ultraviolet (XUV) pulses, produced by high-order harmonic generation, in combination with few-femtosecond infrared (IR) pulses in pump-probe experiments has great potential to disclose ultrafast dynamics in molecules, nanostructures and solids. A crucial prerequisite is a reliable characterization of the temporal properties of the XUV and IR pulses. Several tech…
▽ More
The use of few-femtosecond, extreme ultraviolet (XUV) pulses, produced by high-order harmonic generation, in combination with few-femtosecond infrared (IR) pulses in pump-probe experiments has great potential to disclose ultrafast dynamics in molecules, nanostructures and solids. A crucial prerequisite is a reliable characterization of the temporal properties of the XUV and IR pulses. Several techniques have been developed. The majority of them applies phase reconstruction algorithms to a photoelectron spectrogram obtained by ionizing an atomic target in a pump-probe fashion. If the ionizing radiation is a single harmonic, all the information is encoded in a two-color two-photon signal called sideband (SB). In this work, we present a simplified model to interpret the time-frequency map** of the SB signal and we show that the temporal dispersion of the pulses directly maps onto the shape of its spectrogram. Finally, we derive an analytical solution, which allows us to propose a novel procedure to estimate the second-order dispersion of the XUV and IR pulses in real time and with no need for iterative algorithms.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
New perspectives on segmented crystal calorimeters for future colliders
Authors:
Marco T. Lucchini,
Wonyong Chung,
Sarah C. Eno,
Yihui Lai,
Lorenzo Lucchini,
Minh-Thi Nguyen,
Christopher G. Tully
Abstract:
Crystal calorimeters have a long history of pushing the frontier on high-resolution electromagnetic (EM) calorimetry. We explore in this paper major innovations in collider detector performance that can be achieved with crystal calorimetry when longitudinal segmentation and dual-readout capabilities are combined with a new high EM resolution approach to PFA in multi-jet events, such as…
▽ More
Crystal calorimeters have a long history of pushing the frontier on high-resolution electromagnetic (EM) calorimetry. We explore in this paper major innovations in collider detector performance that can be achieved with crystal calorimetry when longitudinal segmentation and dual-readout capabilities are combined with a new high EM resolution approach to PFA in multi-jet events, such as $e^+e^+\rightarrow HZ$ events in all-hadronic final-states at Higgs factories. We demonstrate a new technique for pre-processing $π^0$ momenta through combinatoric di-photon pairing in advance of applying jet algorithms. This procedure significantly reduces $π^0$ photon splitting across jets in multi-jet events. The correct photon-to-jet assignment efficiency improves by a factor of 3 with a $3\%/\sqrt{E}$ EM resolution. In addition, the technique of bremsstrahlung photon recovery significantly improves electron momentum measurements. A high EM resolution calorimeter increases the Z boson recoil mass resolution in Higgstrahlung events for decays into electron pairs to 80% of that for muon pairs. We present the design and optimization of a highly segmented crystal detector concept that achieves the required energy resolution, and a time resolution better than 30 ps providing exceptional particle identification capabilities. We demonstrate that, contrary to previous detector designs that suffered from large neutral hadron resolution degradation from one interaction length of crystals in front of a sampling hadron calorimeter, the implementation of dual-readout on crystals permits to achieve a resolution better than $30\%/\sqrt{E}\oplus 2\%$ for neutral hadrons. Our studies find that the integration of crystal calorimetry into future Higgs factory collider detectors can open new perspectives by yielding the highest level of combined EM and neutral hadron resolution in the PFA paradigm.
△ Less
Submitted 15 September, 2020; v1 submitted 1 August, 2020;
originally announced August 2020.
-
Unravelling the intertwined atomic and bulk nature of localised excitons by attosecond spectroscopy
Authors:
Matteo Lucchini,
Shunsuke A. Sato,
Giacinto D. Lucarelli,
Bruno Moio,
Giacomo Inzani,
Rocío Borrego-Varillas,
Fabio Frassetto,
Luca Poletto,
Hannes Hübener,
Umberto De Giovannini,
Angel Rubio,
Mauro Nisoli
Abstract:
The electro-optical properties of most semiconductors and insulators of technological interest are dominated by the presence of electron-hole quasiparticles called excitons. The manipulation of these hydrogen-like quasi-particles in dielectrics, has received great interest under the name excitonics that is expected to be of great potential for a variety of applications, including optoelectronics a…
▽ More
The electro-optical properties of most semiconductors and insulators of technological interest are dominated by the presence of electron-hole quasiparticles called excitons. The manipulation of these hydrogen-like quasi-particles in dielectrics, has received great interest under the name excitonics that is expected to be of great potential for a variety of applications, including optoelectronics and photonics. A crucial step for such exploitation of excitons in advanced technological applications is a detailed understanding of their dynamical nature. However, the ultrafast processes unfolding on few-femtosecond and attosecond time scales, of primary relevance in view of the desired extension of electronic devices towards the petahertz regime, remain largely unexplored. Here we apply attosecond transient reflection spectroscopy in a sequential two-foci geometry and observe sub-femtosecond dynamics of a core-level exciton in bulk MgF$_2$ single crystals. With our unique setup, we can access absolute phase delays which allow for an unambiguous comparison with theoretical calculations based on the Wannier-Mott model. Our results show that excitons surprisingly exhibit a dual atomic- and solid-like character which manifests itself on different time scales. While the former is responsible for a femtosecond optical Stark effect, the latter dominates the attosecond excitonic response and originates by the interaction with the crystal. Further investigation of the role of exciton localization proves that the bulk character persists also for strongly localised quasi-particles and allows us to envision a new route to control exciton dynamics in the close-to-petahertz regime.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Novel beamline for attosecond transient reflection spectroscopy in a sequential two-foci geometry
Authors:
Giacinto D. Lucarelli,
Bruno Moio,
Giacomo Inzani,
Nicola Fabris,
Liliana Moscardi,
Fabio Frassetto,
Luca Poletto,
Mauro Nisoli,
Matteo Lucchini
Abstract:
We present an innovative beamline for extreme ultraviolet (XUV)-infrared (IR) pump-probe reflection spectroscopy in solids with attosecond temporal resolution. The setup uses an actively stabilized interferometer, where attosecond pulse trains or isolated attosecond pulses are produced by high-order harmonic generation in gases. After collinear recombination, the attosecond XUV pulses and the femt…
▽ More
We present an innovative beamline for extreme ultraviolet (XUV)-infrared (IR) pump-probe reflection spectroscopy in solids with attosecond temporal resolution. The setup uses an actively stabilized interferometer, where attosecond pulse trains or isolated attosecond pulses are produced by high-order harmonic generation in gases. After collinear recombination, the attosecond XUV pulses and the femtosecond IR pulses are focused twice in sequence by toroidal mirrors, giving two spatially separated interaction regions. In the first region, the combination of a gas target with a time-of-flight spectrometer allows for attosecond photoelectron spectroscopy experiments. In the second focal region, an XUV reflectometer is used for attosecond transient reflection spectroscopy (ATRS) experiments. Since the two measurements can be performed simultaneously, precise pump-probe delay calibration can be achieved, thus opening the possibility for a new class of attosecond experiments on solids. Successful operation of the beamline is demonstrated by the generation and characterization of isolated attosecond pulses, the measurement of the absolute reflectivity of SiO2, and by performing simultaneous photoemission/ATRS in Ge.
△ Less
Submitted 25 February, 2020;
originally announced February 2020.
-
Three-dimensional charge transport map** by two-photon absorption edge transient-current technique in synthetic single-crystalline diamond
Authors:
C. Dorfer,
D. Hits,
L. Kasmi,
G. Kramberger,
M. Lucchini,
M. Mikuz,
R. Wallny
Abstract:
We demonstrate the application of two-photon absorption transient current technique to wide bandgap semiconductors. We utilize it to probe charge transport properties of single-crystal Chemical Vapor Deposition (scCVD) diamond. The charge carriers, inside the scCVD diamond sample, are excited by a femtosecond laser through simultaneous absorption of two photons. Due to the nature of two-photon abs…
▽ More
We demonstrate the application of two-photon absorption transient current technique to wide bandgap semiconductors. We utilize it to probe charge transport properties of single-crystal Chemical Vapor Deposition (scCVD) diamond. The charge carriers, inside the scCVD diamond sample, are excited by a femtosecond laser through simultaneous absorption of two photons. Due to the nature of two-photon absorption, the generation of charge carriers is confined in space (3-D) around the focal point of the laser. Such localized charge injection allows to probe the charge transport properties of the semiconductor bulk with a fine-grained 3-D resolution. Exploiting spatial confinement of the generated charge, the electrical field of the diamond bulk was mapped at different depths and compared to an X-ray diffraction topograph of the sample. Measurements utilizing this method provide a unique way of exploring spatial variations of charge transport properties in transparent wide-bandgap semiconductors.
△ Less
Submitted 24 May, 2019; v1 submitted 23 May, 2019;
originally announced May 2019.
-
Attosecond screening dynamics mediated by electron-localization
Authors:
M. Volkov,
S. A. Sato,
F. Schlaepfer,
L. Kasmi,
N. Hartmann,
M. Lucchini,
L. Gallmann,
A. Rubio,
U. Keller
Abstract:
Transition metals with their densely confined and strongly coupled valence electrons are key constituents of many materials with unconventional properties, such as high-Tc superconductors, Mott insulators and transition-metal dichalcogenides. Strong electron interaction offers a fast and efficient lever to manipulate their properties with light, creating promising potential for next-generation ele…
▽ More
Transition metals with their densely confined and strongly coupled valence electrons are key constituents of many materials with unconventional properties, such as high-Tc superconductors, Mott insulators and transition-metal dichalcogenides. Strong electron interaction offers a fast and efficient lever to manipulate their properties with light, creating promising potential for next-generation electronics. However, the underlying dynamics is a fast and intricate interplay of polarization and screening effects, which is poorly understood. It is hidden below the femtosecond timescale of electronic thermalization, which follows the light-induced excitation. Here, we investigate the many-body electron dynamics in transition metals before thermalization sets in. We combine the sensitivity of intra-shell transitions to screening effects with attosecond time resolution to uncover the interplay of photo-absorption and screening. First-principles time-dependent calculations allow us to assign our experimental observations to ultrafast electronic localization on d-orbitals. The latter modifies the whole electronic structure as well as the collective dynamic response of the system on a timescale much faster than the light-field cycle. Our results demonstrate a possibility for steering the electronic properties of solids prior to electron thermalization, suggesting that the ultimate speed of electronic phase transitions is limited only by the duration of the controlling laser pulse. Furthermore, external control of the local electronic density serves as a fine tool for testing state-of-the art models of electron-electron interactions. We anticipate our study to facilitate further investigations of electronic phase transitions, laser-metal interactions and photo-absorption in correlated electron systems on its natural timescale.
△ Less
Submitted 7 November, 2018; v1 submitted 2 November, 2018;
originally announced November 2018.
-
Ptychographic reconstruction of attosecond pulses
Authors:
M. Lucchini,
M. H. Brügmann,
A. Ludwig,
L. Gallmann,
U. Keller,
T. Feurer
Abstract:
We demonstrate a new attosecond pulse reconstruction modality which uses an algorithm that is derived from ptychography. In contrast to other methods, energy and delay sampling are not correlated, and as a result, the number of electron spectra to record is considerably smaller. Together with the robust algorithm, this leads to a more precise and fast convergence of the reconstruction.
We demonstrate a new attosecond pulse reconstruction modality which uses an algorithm that is derived from ptychography. In contrast to other methods, energy and delay sampling are not correlated, and as a result, the number of electron spectra to record is considerably smaller. Together with the robust algorithm, this leads to a more precise and fast convergence of the reconstruction.
△ Less
Submitted 16 November, 2015; v1 submitted 31 August, 2015;
originally announced August 2015.
-
Time delay anisotropy in photoelectron emission from the isotropic ground state of helium
Authors:
Sebastian Heuser,
Álvaro Jiménez Galán,
Claudio Cirelli,
Mazyar Sabbar,
Robert Boge,
Matteo Lucchini,
Lukas Gallmann,
Igor Ivanov,
Anatoli S. Kheifets,
J. Marcus Dahlström,
Eva Lindroth,
Luca Argenti,
Fernando Martín,
Ursula Keller
Abstract:
Time delays of electrons emitted from an isotropic initial state and leaving behind an isotropic ion are assumed to be angle-independent. Using an interferometric method involving XUV attosecond pulse trains and an IR probe field in combination with a detection scheme, which allows for full 3D momentum resolution, we show that measured time delays between electrons liberated from the $1s^2$ spheri…
▽ More
Time delays of electrons emitted from an isotropic initial state and leaving behind an isotropic ion are assumed to be angle-independent. Using an interferometric method involving XUV attosecond pulse trains and an IR probe field in combination with a detection scheme, which allows for full 3D momentum resolution, we show that measured time delays between electrons liberated from the $1s^2$ spherically symmetric ground state of helium depend on the emission direction of the electrons relative to the linear polarization axis of the ionizing XUV light. Such time-delay anisotropy, for which we measure values as large as 60 attoseconds, is caused by the interplay between final quantum states with different symmetry and arises naturally whenever the photoionization process involves the exchange of more than one photon in the field of the parent-ion. With the support of accurate theoretical models, the angular dependence of the time delay is attributed to small phase differences that are induced in the laser-driven continuum transitions to the final states. Since most measurement techniques tracing attosecond electron dynamics involve the exchange of at least two photons, this is a general, significant, and initially unexpected effect that must be taken into account in all such photoionization measurements.
△ Less
Submitted 3 September, 2015; v1 submitted 31 March, 2015;
originally announced March 2015.
-
Resonance effects in photoemission time delays
Authors:
M. Sabbar,
S. Heuser,
R. Boge,
M. Lucchini,
T. Carette,
E. Lindroth,
L. Gallmann,
C. Cirelli,
U. Keller
Abstract:
We present measurements of single-photon ionization time delays between valence electrons of argon and neon using a coincidence detection technique that allows for the simultaneous measurement of both species under identical conditions. Taking into account the chirp of the ionizing single attosecond pulse (attochirp) ensures that the clock of our measurement technique is started at the same time f…
▽ More
We present measurements of single-photon ionization time delays between valence electrons of argon and neon using a coincidence detection technique that allows for the simultaneous measurement of both species under identical conditions. Taking into account the chirp of the ionizing single attosecond pulse (attochirp) ensures that the clock of our measurement technique is started at the same time for both types of electrons, revealing with high accuracy and resolution energy-dependent time delays of a few tens of attoseconds. By comparing our results with theoretical predictions, we confirm that the so-called Wigner delay correctly describes single-photon ionization delays as long as atomic resonances can be neglected. Our data, however, also reveal that such resonances can greatly affect the measured delays beyond the simple Wigner picture.
△ Less
Submitted 19 February, 2015; v1 submitted 24 July, 2014;
originally announced July 2014.
-
Multiphoton transitions for delay-zero calibration in attosecond spectroscopy
Authors:
Jens Herrmann,
Matteo Lucchini,
Shaohao Chen,
Mengxi Wu,
André Ludwig,
Lamia Kasmi,
Kenneth J. Schafer,
Lukas Gallmann,
Mette B. Gaarde,
Ursula Keller
Abstract:
The exact delay-zero calibration in an attosecond pump-probe experiment is important for the correct interpretation of experimental data. In attosecond transient absorption spectroscopy the determination of the delay-zero exclusively from the experimental results is not straightforward and may introduce significant errors. Here, we report the observation of quarter-laser-cycle (4ω) oscillations in…
▽ More
The exact delay-zero calibration in an attosecond pump-probe experiment is important for the correct interpretation of experimental data. In attosecond transient absorption spectroscopy the determination of the delay-zero exclusively from the experimental results is not straightforward and may introduce significant errors. Here, we report the observation of quarter-laser-cycle (4ω) oscillations in a transient absorption experiment in helium using an attosecond pulse train overlapped with a precisely synchronized, moderately strong infrared pulse. We demonstrate how to extract and calibrate the delay-zero with the help of the highly nonlinear 4ω signal. A comparison with the solution of the time-dependent Schrödinger equation is used to confirm the accuracy and validity of the approach. Moreover, we study the mechanisms behind the quarter-laser-cycle and the better-known half-laser-cycle oscillations as a function of experimental parameters. This investigation yields an indication of the robustness of our delay-zero calibration approach.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Energy-dependent photoemission delays from noble metal surfaces by attosecond interferometry
Authors:
R. Locher,
L. Castiglioni,
M. Lucchini,
M. Greif,
L. Gallmann,
J. Osterwalder,
M. Hengsberger,
U. Keller
Abstract:
How quanta of energy and charge are transported on both atomic spatial and ultrafast time scales is at the heart of modern technology. Recent progress in ultrafast spectroscopy has allowed us to directly study the dynamical response of an electronic system to interaction with an electromagnetic field. Here, we present energy-dependent photoemission delays from the noble metal surfaces Ag(111) and…
▽ More
How quanta of energy and charge are transported on both atomic spatial and ultrafast time scales is at the heart of modern technology. Recent progress in ultrafast spectroscopy has allowed us to directly study the dynamical response of an electronic system to interaction with an electromagnetic field. Here, we present energy-dependent photoemission delays from the noble metal surfaces Ag(111) and Au(111). An interferometric technique based on attosecond pulse trains is applied simultaneously in a gas phase and a solid state target to derive surface-specific photoemission delays. Experimental delays on the order of 100 as are in the same time range as those obtained from simulations. The strong variation of measured delays with excitation energy in Ag(111), which cannot be consistently explained invoking solely electron transport or initial state localization as supposed in previous work, indicates that final state effects play a key role in photoemission from solids.
△ Less
Submitted 25 March, 2015; v1 submitted 21 March, 2014;
originally announced March 2014.
