-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider
Authors:
L. Bottura,
D. Aguglia,
B. Auchmann,
T. Arndt,
J. Beard,
A. Bersani,
F. Boattini,
M. Breschi,
B. Caiffi,
X. Chaud,
M. Dam,
F. Debray,
H. De Gersem,
E. De Matteis,
A. Dudarev,
S. Farinon,
A. Kario,
R. Losito,
S. Mariotto,
M. Mentink,
R. Musenich,
T. Ogitsu,
M. Prioli,
L. Quettier,
L. Rossi
, et al. (8 additional authors not shown)
Abstract:
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish…
▽ More
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions.
△ Less
Submitted 29 March, 2022; v1 submitted 26 March, 2022;
originally announced March 2022.
-
Future Circular Lepton Collider FCC-ee: Overview and Status
Authors:
I. Agapov,
M. Benedikt,
A. Blondel,
M. Boscolo,
O. Brunner,
M. Chamizo Llatas,
T. Charles,
D. Denisov,
W. Fischer,
E. Gianfelice-Wendt,
J. Gutleber,
P. Janot,
M. Koratzinos,
R. Losito,
S. Nagaitsev,
K. Oide,
T. Raubenheimer,
R. Rimmer,
J. Seeman,
D. Shatilov,
V. Shiltsev,
M. Sullivan,
U. Wienands,
F. Zimmermann
Abstract:
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,…
▽ More
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Future Circular Hadron Collider FCC-hh: Overview and Status
Authors:
M. Benedikt,
A. Chance,
B. Dalena,
D. Denisov,
M. Giovannozzi,
J. Gutleber,
R. Losito,
M. Mangano,
T. Raubenheimer,
W. Riegler,
V. Shiltsev,
D. Schulte,
D. Tommasini,
F. Zimmermann
Abstract:
The Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. Its goal is to push the field to the next energy frontier beyond LHC, increasing by an order of magnitude the mass of particles that could be directly produced, and decreasing by an order of magnitude the subatomic distances to be studied. The FCC study covers two accelerators, namely,…
▽ More
The Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. Its goal is to push the field to the next energy frontier beyond LHC, increasing by an order of magnitude the mass of particles that could be directly produced, and decreasing by an order of magnitude the subatomic distances to be studied. The FCC study covers two accelerators, namely, an energy-frontier hadron collider (FCC-hh) and a highest luminosity, high-energy lepton collider (FCC-ee). Both rings are hosted in the same 100 km tunnel infrastructure, replicating the CERN strategy for LEP and LHC, i.e. develo** a lepton and a hadron ring sharing the same tunnel. This paper is devoted to the FCC-hh and summarizes the key features of the FCC-hh accelerator design, performance reach, and underlying technologies. The material presented in this paper builds on the conceptual design report published in 2019, and extends it, including also the progress made and the results achieved since then.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Multiple scattering of channeled and non-channeled positively charged particles in bent monocrystalline silicon
Authors:
W. Scandale,
G. Arduini,
F. Cerutti,
L. S. Esposito,
M. Garattini,
S. Gilardoni,
R. Losito,
A. Masi,
D. Mirarchi,
S. Montesano,
S. Redaelli,
R. Rossi,
G. Smirnov,
L. Burmistrov,
S. Dubos,
V. Puill,
A. Stocchi,
L. Bandiera,
V. Guidi,
A. Mazzolari,
M. Romagnoni,
F. Murtas,
F. Addesa,
G. Cavoto,
F. Iacoangeli
, et al. (17 additional authors not shown)
Abstract:
We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in d…
▽ More
We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in detail the influence of angular constraints on the magnitude of the effect. Comparison of the multiple scattering process at different energies indicates a violation of the law of inverse proportionality of the rms angle of channeled particles with energy. By increasing the statistics, we have improved the results of multiple scattering measurements for particles moving, but not channeled, in silicon crystals.
△ Less
Submitted 31 January, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Metamaterial insertions for resistive-wall beam-coupling impedance reduction
Authors:
Alessandro Danisi,
Carlo Zannini,
Roberto Losito,
Alessandro Masi
Abstract:
Resistive-wall impedance usually constitutes a significant percentage of the total beamcoupling impedance budget of an accelerator. Reduction techniques often entail high electrical-conductivity coatings. This paper investigates the use of negative-permittivity or negative-permeability materials for sensibly reducing or theoretically nearly cancelling resistive-wall impedance. The proposed approac…
▽ More
Resistive-wall impedance usually constitutes a significant percentage of the total beamcoupling impedance budget of an accelerator. Reduction techniques often entail high electrical-conductivity coatings. This paper investigates the use of negative-permittivity or negative-permeability materials for sensibly reducing or theoretically nearly cancelling resistive-wall impedance. The proposed approach is developed by means of an equivalent transmission-line model. The effectiveness of such materials is benchmarked for the negative permeability case with experimental measurements in two frequency bandwidths. This first-stage study opens the possibility of considering metamaterials for impedance mitigation.
△ Less
Submitted 5 October, 2019;
originally announced October 2019.
-
Experimental setup and procedure for the measurement of the 7Be(n,α)α reaction at n_TOF
Authors:
L. Cosentino,
A. Musumarra,
M. Barbagallo,
A. Pappalardo,
N. Colonna,
L. Damone,
M. Piscopo,
P. Finocchiaro,
E. Maugeri,
S. Heinitz,
D. Schumann,
R. Dressler,
N. Kivel,
O. Aberle,
J. Andrzejewski,
L. Audouin,
M. Ayranov,
M. Bacak,
S. Barros,
J. Balibrea-Correa,
V. Beecares,
F. Becvar,
C. Beinrucker,
E. Berthoumieux,
J. Billowes
, et al. (107 additional authors not shown)
Abstract:
The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the…
▽ More
The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the cosmological Lithium abundance problem, and whose only measurement, at thermal energy, dates back to 1963. The apparently unsurmountable experimental difficulties stemming from the huge 7Be γ-activity, along with the lack of a suitable neutron beam facility, had so far prevented further measurements. The detection system is subject to considerable radiation damage, but is capable of disentangling the rare reaction signals from the very high background. This newly developed setup could likely be useful also to study other challenging reactions requiring the detectors to be installed directly in the neutron beam.
△ Less
Submitted 1 April, 2016;
originally announced April 2016.
-
Progress with the Upgrade of the SPS for the HL-LHC Era
Authors:
B. Goddard,
T. Argyropoulos,
H. Bartosik,
W. Bartmann,
T. Bohl,
F. Caspers,
K. Cornelis,
H. Damerau,
L. Drøsdal,
L. Ducimetière,
R. Garoby,
M. Gourber-Pace,
W. Höfle,
G. Iadarola,
L. Jensen,
V. Kain,
R. Losito,
M. Meddahi,
A. Mereghetti,
V. Mertens,
Ö. Mete,
E. Montesinos,
J. E. Müller,
Y. Papaphilippou,
G. Rumolo
, et al. (6 additional authors not shown)
Abstract:
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in ad…
▽ More
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in addition to the machine studies and simulations performed in 2012. The expected machine performance reach is estimated on the basis of the present knowledge, and the remaining decisions that still need to be made concerning upgrade options are detailed.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Upgrades Of the SPS, Transfer Line and LHC Injection Protection Devices For the HL-LHC Era
Authors:
Ö. Mete,
O. Aberle,
F. Cerutti,
K. Cornelis,
B. Goddard,
V. Kain,
R. Losito,
F. L. Maciariello,
M. Meddahi,
J. Uythoven,
F. M. Velotti,
E. Gianfelice-Wendt,
A. Mereghetti
Abstract:
The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance…
▽ More
The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance of the existing equipment against beam impact. Most of the protection devices in the SPS ring, its transfer lines and the LHC injection areas will be put under operational constraints which are beyond their design specification. The equipment concerned has been reviewed and their resistance to the HL-LHC beams checked. Theoretical and simulation studies have been performed for the SPS beam scra** system, the protection devices and the dump absorbers of the SPS-to-LHC transfer lines, as well as for the LHC injection protection devices. The first results of these studies are reported, together with the future prospects.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
GEANT4 simulation of the neutron background of the C$_6$D$_6$ set-up for capture studies at n_TOF
Authors:
n_TOF collaboration,
:,
P. Žugec,
N. Colonna,
D. Bosnar,
S. Altstadt,
J. Andrzejewski,
L. Audouin,
M. Barbagallo,
V. Bécares,
F. Bečvář,
F. Belloni,
E. Berthoumieux,
J. Billowes,
V. Boccone,
M. Brugger,
M. Calviani,
F. Calviño,
D. Cano-Ott,
C. Carrapiço,
F. Cerutti,
E. Chiaveri,
M. Chin,
G. Cortés,
M. A. Cortés-Giraldo
, et al. (83 additional authors not shown)
Abstract:
The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in t…
▽ More
The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in the same manner as experimental data, in particular by applying the Pulse Height Weighting Technique. The simulations have been validated against a measurement of the neutron background performed with a $^\mathrm{nat}$C sample, showing an excellent agreement above 1 keV. At lower energies, an additional component in the measured $^\mathrm{nat}$C yield has been discovered, which prevents the use of $^\mathrm{nat}$C data for neutron background estimates at neutron energies below a few hundred eV. The origin and time structure of the neutron background have been derived from the simulations. Examples of the neutron background for two different samples are demonstrating the important role of accurate simulations of the neutron background in capture cross section measurements.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
The UA9 experimental layout
Authors:
W. Scandale,
G. Arduini,
R. Assmann,
C. Bracco,
F. Cerutti,
J. Christiansen,
S. Gilardoni,
E. Laface,
R. Losito,
A. Masi,
E. Metral,
D. Mirarchi,
S. Montesano,
V. Previtali,
S. Redaelli,
G. Valentino,
P. Schoofs,
G. Smirnov,
L. Tlustos,
E. Bagli,
S. Baricordi,
P. Dalpiaz,
V. Guidi,
A. Mazzolari,
D. Vincenzi
, et al. (36 additional authors not shown)
Abstract:
The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode.
Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam.
Scintill…
▽ More
The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode.
Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam.
Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the im**ing beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010.
△ Less
Submitted 29 June, 2011;
originally announced June 2011.
-
Improved surface treatment of the superconducting TESLA cavities
Authors:
L. Lilje,
C. Antoine,
C. Benvenuti,
D. Bloess,
J. -P. Charrier,
E. Chiaveri,
L. Ferreira,
R. Losito,
A. Matheisen,
H. Preis,
D. Proch,
D. Reschke,
H. Safa,
P. Schmueser,
D. Trines,
B. Visentin,
H. Wenninger
Abstract:
The proposed linear electron-positron collider TESLA is based on 1.3 GHz superconducting niobium cavities for particle acceleration. For a centre-of-mass energy of 500 GeV, an accelerating field of 23.4 MV/m is required which is reliably achieved with a niobium surface preparation by chemical etching. An upgrade of the collider to 800 GeV requires an improved cavity preparation technique. In thi…
▽ More
The proposed linear electron-positron collider TESLA is based on 1.3 GHz superconducting niobium cavities for particle acceleration. For a centre-of-mass energy of 500 GeV, an accelerating field of 23.4 MV/m is required which is reliably achieved with a niobium surface preparation by chemical etching. An upgrade of the collider to 800 GeV requires an improved cavity preparation technique. In this paper, results are presented on single-cell cavities which demonstrate that fields of up to 40 MV/m are accessible by electrolytic polishing of the inner surface of the cavity.
△ Less
Submitted 27 January, 2004;
originally announced January 2004.
