-
Deep mouse brain two-photon near-infrared fluorescence imaging using a superconducting nanowire single-photon detector array
Authors:
Amr Tamimi,
Martin Caldarola,
Sebastian Hambura,
Juan C. Boffi,
Niels Noordzij,
Johannes W. N. Los,
Antonio Guardiani,
Hugo Kooiman,
Ling Wang,
Christian Kieser,
Florian Braun,
Andreas Fognini,
Robert Prevedel
Abstract:
Two-photon microscopy (2PM) has become an important tool in biology to study the structure and function of intact tissues in-vivo. However, adult mammalian tissues such as the mouse brain are highly scattering, thereby putting fundamental limits on the achievable imaging depth, which typically resides around 600-800um. In principle, shifting both the excitation as well as (fluorescence) emission l…
▽ More
Two-photon microscopy (2PM) has become an important tool in biology to study the structure and function of intact tissues in-vivo. However, adult mammalian tissues such as the mouse brain are highly scattering, thereby putting fundamental limits on the achievable imaging depth, which typically resides around 600-800um. In principle, shifting both the excitation as well as (fluorescence) emission light to the shortwave near-infrared (SWIR, 1000-1700 nm) region promises substantially deeper imaging in 2PM, yet has proven challenging in the past due to the limited availability of detectors and probes in this wavelength region. To overcome these limitations and fully capitalize on the SWIR region, in this work we introduce a novel array of superconducting nanowire single-photon detectors (SNSPDs) and associated custom detection electronics for the use in near-infrared 2PM. The SNSPD array exhibits high efficiency and dynamic range, as well as low dark-count rates over a wide wavelength range. Additionally, the electronics and software permit seamless integration into typical 2PM systems. Together with a fluorescent dye emitting at 1105 nm, we report imaging depth of > 1.1mm in the in-vivo mouse brain, limited only by available labeling density and laser power. Our work further establishes SWIR 2PM approaches and SNSPDs as promising technologies for deep tissue biological imaging.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Broadband dielectric studies in linseed oil: Supercriticality and the New Insight into Melting/Freezing Discontinuous Transition
Authors:
Aleksandra Drozd-Rzoska,
Sylwester J. Rzoska,
Joanna Łoś
Abstract:
The long-range supercritical changes of dielectric constant, resembling ones observed in the isotropic phase of rod-like liquid crystalline compounds, are evidenced on approaching liquid-solid discontinuous phase transition. The 'supercriticality' can be an additional factor for supporting the unique pro-health properties of linseed oil. It can also be significant for numerous technological applic…
▽ More
The long-range supercritical changes of dielectric constant, resembling ones observed in the isotropic phase of rod-like liquid crystalline compounds, are evidenced on approaching liquid-solid discontinuous phase transition. The 'supercriticality' can be an additional factor for supporting the unique pro-health properties of linseed oil. It can also be significant for numerous technological applications. The report also reveals properties significant for melting/freezing discontinuous phase transition cognitive puzzle. Broadband dielectric spectroscopy studies revealed long-range premelting (heating from the solid phase) and post-freezing (cooling from the liquid phase) effects with critical-like parametrizations. They can be correlated with the 'grain model' for premelting and its development by the Lipovsky model. The evidence for the post-freezing effect, with the critical-like portrayal, may indicate a specific granular solidification associated with pretransitional fluctuations. Numerous hallmarks of liquid-liquid and solid-solid phase transitions have also been found. Notably, the melting temperature surrounding is related to the minimum and the freezing temperature to the maximum of dielectric loss factor D=tan(delta). Regarding dynamics, three primary relaxation processes have been found. Their changes in subsequent temperature intervals, related to the apparent activation enthalpy, follow critical-like patterns with the same singular temperature. For relaxation times evolution, it leads to optimal parameterizations via the 'critical and activated' equation, recently proposed.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
A Critical Insight into Pretransitional Behavior and Dielectric Tunability of Relaxor Ceramics
Authors:
Sylwester J. Rzoska,
Aleksandra Drozd-Rzoska,
Weronika Bulejak,
Joanna Los,
Szymon Starzonek,
Mikolaj Szafran,
Feng Gao
Abstract:
The model discussion focused on links between the unique properties of relaxor ceramics and the basics of critical phenomena physics and glass transition physics. It indicates the significance of uniaxiality for appearing mean-field features near paraelectric_ferroelectric transition. Pretransitional fluctuations, increasing up to grain size and leading to inter-grain, random, local electric field…
▽ More
The model discussion focused on links between the unique properties of relaxor ceramics and the basics of critical phenomena physics and glass transition physics. It indicates the significance of uniaxiality for appearing mean-field features near paraelectric_ferroelectric transition. Pretransitional fluctuations, increasing up to grain size and leading to inter-grain, random, local electric fields, are indicated to be responsible for relaxor ceramics characteristics. Their impacts yield the pseudo spinodal behavior associated with weakly discontinuous local phase transitions. The emerging model redefines the meaning of the Burns temperature and polar nanoregions PNRs. It explains coherently dielectric constant changes with the diffused maximum near paraelectric_ferroelectric transition, the sensitivity even to moderate electric fields, tunability, and the glassy dynamics. These considerations are confronted with experimental results for the complex dielectric permittivity studies in relaxor ceramic, covering the 200K range, from the paraelectric to the deep ferroelectric phase. The distortions-sensitive and derivative-based analysis revealed the preference for the exponential scaling pattern in the paraelectric phase and the surroundings of the paraelectric-ferroelectric transition. It may suggest the Griffith phase behavior associated with the mean-field criticality disturbed by random local impacts. The discussion of experimental results is supplemented by relaxation times changes and the coupled energy losses analysis. The studies also led to the description of tunability temperature changes with scaling relations.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Combining Particle Tracking with Electromagnetic Radiation Showers: Merging GPT and Geant4 with Visualization
Authors:
David H. Dowell,
Munther Hindi,
S. B. van der Geer,
M. J. de Loos
Abstract:
Field emitted electrons can seriously affect the operation of high-field, high-duty factor electron accelerators. Accelerated field emission can result in high average power beams which can radiation damage beamline components. In addition, localized losses generate thermal hot spots whose outgassing degrades the ultra-high vacuum required in photoinjectors and cryomodules. However, despite their…
▽ More
Field emitted electrons can seriously affect the operation of high-field, high-duty factor electron accelerators. Accelerated field emission can result in high average power beams which can radiation damage beamline components. In addition, localized losses generate thermal hot spots whose outgassing degrades the ultra-high vacuum required in photoinjectors and cryomodules. However, despite their importance, the effects of field emission are rarely included in the design and engineering of electron injectors. This work attempts to remedy this situation by combining two well-known and well-documented programs, GPT and Geant4, to track electrons and their losses in an injector beamline. This paper describes a system of programs which simulates electron paths and losses along the beamline. In addition, the tracking results can be zoomed and panned along and about the beampipe envelope using an open-source 3D CAD program. The scattering albedo calculations of the combined program, GPT-Geant4, are shown to be in good agreement with the literature albedos. The paper concludes with a dark current simulation for the LCLS-II injector from the cathode to the collimator at 1.5 m from the cathode.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Continuous Isotropic-Nematic transition in compressed rod-like based nanocolloid
Authors:
Joanna Łoś,
Aleksandra Drozd-Rzoska,
Sylwester J. Rzoska,
Szymon Starzonek Krzysztof Czupryński,
Prabir Mukherjee
Abstract:
Landau - de Gennes mean field model predicts the discontinuous transition for the Isotropic - Nematic transition, associated with uniaxial and quadrupolar order parameter in three dimensions. This report shows pressure-related dielectric studies for rod-like nematogenic pentylcyanobiphenyl (5CB) and its nanocolloids with BaTiO3 nanoparticles. The scan of dielectric constant revealed the continuous…
▽ More
Landau - de Gennes mean field model predicts the discontinuous transition for the Isotropic - Nematic transition, associated with uniaxial and quadrupolar order parameter in three dimensions. This report shows pressure-related dielectric studies for rod-like nematogenic pentylcyanobiphenyl (5CB) and its nanocolloids with BaTiO3 nanoparticles. The scan of dielectric constant revealed the continuous I-N transition in a compressed nanocolloid with a tiny amount of nanoparticles (x=0.1%). For the nematic phase in 5CB and its x=1% nanocolloid the enormous values of dielectric constant and the bending-type long-range pretransitional behavior were detected. The 'sha**' influence of pretransitional fluctuations was also detected for the ionic-related contribution to dielectric permittivity in the isotropic phase. For the high-frequency relaxation domain, this impact was tested for the primary relaxation time and the translational-orientaional decoupling.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
The impact of ionic contribution to dielectric permittivity in 11CB liquid crystal and its colloids with BaTiO3 nanoparticles
Authors:
Joanna LOs,
Aleksandra Drozd-Rzoska,
Sylwester J. Rzoska,
Krzysztof Czuprynski
Abstract:
The report shows the temperature behavior of the real part of dielectric permittivity in the static (dielectric constant) and lo-frequency (LF) domains in bulk samples of 11CB and BaTiO3-based nanocolloids. The study covers the Isotropic Liquid (I), Nematic (N), Smectoc A (SmA) and Solid CRystal (Cr) phases. For each phase, the dominance of pretransitional fluctuations, significantly moderated by…
▽ More
The report shows the temperature behavior of the real part of dielectric permittivity in the static (dielectric constant) and lo-frequency (LF) domains in bulk samples of 11CB and BaTiO3-based nanocolloids. The study covers the Isotropic Liquid (I), Nematic (N), Smectoc A (SmA) and Solid CRystal (Cr) phases. For each phase, the dominance of pretransitional fluctuations, significantly moderated by nanoparticles is shown. The authors consider separate focus on dielectric constant(Eps(T)) evolution in the static domain yielding mainly response from permanent dipole moments and their arrangement and in the low-frequency (LF) domain DeltaEps'(f)=Eps'(f)-Eps(where Eps'(f) is for the real part of dielectric permittivity in the LF domain).which is associated solely with ionic-related polarization mechanism. All these lead to new experimental evidence concerning I-N, N-SmA and SmA-Cr transitions.focusing on the strength and extent of pretransitional effects, critical exponents and phase transition discontinuities. The strong evidence for pretransitional effects near SmA-N transition is notable, particularly regarding DeltaEps'(f,T). Studies are supplemented by DC electric conductivity - the parameter also related to LF domain. Finally, the validity of the relation Eps'(f,T) = Af^(-3/2)+Eps (where f stands for the frequency and A is a constant parameter) often used for discussing dielectric spectra in LC compounds and its nanocollids in the LF domain, is examined.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Mid-infrared Single-photon Detection Using Superconducting NbTiN Nanowires with Sub-15 ps Time Resolution in a Gifford-McMahon Cryocooler
Authors:
** Chang,
Johannes W. N. Los,
Ronan Gourgues,
Stephan Steinhauer,
S. N. Dorenbos,
Silvania F. Pereira,
H. Paul Urbach,
Val Zwiller,
Iman Esmaeil Zadeh
Abstract:
Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons…
▽ More
Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons (<0.8 eV) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex mK dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5-9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon (GM) cryocoolers. By optimizing the superconducting film deposition process, film thickness and nanowire design, our fiber-coupled devices achieved > 70% system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Detecting Infrared Single Photons with Near-Unity System Detection Efficiency
Authors:
** Chang,
Johannes W. N. Los,
Jaime Oscar Tenorio-Pearl,
Niels Noordzij,
Ronan Gourgues,
Antonio Guardiani,
Julien R. Zichi,
Silvania F. Pereira,
H. Paul Urbach,
Val Zwiller,
Sander N. Dorenbos,
Iman Esmaeil Zadeh
Abstract:
Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detecti…
▽ More
Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detection efficiency with high timing performance remains an outstanding challenge. In this work, we show novel superconducting nanowire single photon detectors fabricated on membranes with 94-99.5 (plus minus 2.07%) system detection efficiency in the wavelength range 1280-1500 nm. The SiO2/Au membrane enables broadband absorption in small SNSPDs, offering high detection efficiency in combination with high timing performance. With low noise cryogenic amplifiers operated in the same cryostat, our efficient detectors reach timing jitter in the range of 15-26 ps. We discuss the prime challenges in optical design, device fabrication as well as accurate and reliable detection efficiency measurements to achieve high performance single-photon detection. As a result, the fast-develo** fields of quantum information science, quantum metrology, infrared imaging and quantum networks will greatly benefit from this far-reaching quantum detection technology.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
A platform for high performance photon correlation measurements
Authors:
Iman Esmaeil Zadeh,
Johannes W. N. Los,
Ronan B. M. Gourgues,
** Chang,
Ali W. Elshaari,
Julien Zichi,
Yuri J. van Staaden,
Jeroen Swens,
Nima Kalhor,
Antonio Guardiani,
Yun Meng,
Kai Zou,
Sergiy Dobrovolskiy,
Andreas W. Fognini,
Dennis R. Schaart,
Dan Dalacu,
Philip J. Poole,
Michael E. Reimer,
Xiaolong Hu,
Silvania F. Pereira,
Val Zwiller,
Sander N. Dorenbos
Abstract:
A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD),…
▽ More
A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD), we fabricated devices demonstrating superior performance over all previously reported detectors in the combination of efficiency and time resolution. Our findings prove that small variations in the nanowire width, in the order of a few nanometers, can lead to a significant penalty on their temporal response. Addressing these issues, we consistently achieved high time resolution (best device 7.7\,ps, other devices $\sim$10-16\,ps) simultaneously with high system detection efficiencies ($80-90\%$) in the wavelength range of 780-1000\,nm, as well as in the telecom bands (1310-1550\,nm). The use of thicker films allowed us to fabricate large-area multi-pixel devices with homogeneous pixel performance. We first fabricated and characterized a $100\times100\, μm^2$ 16-pixel detector and showed there was little variation among individual pixels. Additionally, to showcase the power of our platform, we fabricated and characterized 4-pixel multimode fiber-coupled detectors and carried out photon correlation experiments on a nanowire quantum dot resulting in $g^2(0)$ values lower than 0.04. The multi-pixel detectors alleviate the need for beamsplitters and can be used for higher order correlations with promising prospects not only in the field of quantum optics, but also in bio-imaging applications, such as fluorescence microscopy and positron emission tomography.
△ Less
Submitted 22 March, 2020;
originally announced March 2020.
-
Pretransitional effects of the isotropic liquid-plastic crystal transition
Authors:
A. Drozd-Rzoska,
S. Starzonek,
S. J. Rzoska,
J. Łoś,
Z. Kutnjak,
S. Kralj
Abstract:
We report on strong pretransitional effects across the isotropic liquid-plastic crystal melting temperature in linear and nonlinear dielectric response. Studies were carried out for cyclooctanol (C8H16O) in the unprecedented range of temperatures 120 K < T < 345 K. Such pretransitional effects have not yet been reported in any plastic crystals. Results include the discovery of the experimental man…
▽ More
We report on strong pretransitional effects across the isotropic liquid-plastic crystal melting temperature in linear and nonlinear dielectric response. Studies were carried out for cyclooctanol (C8H16O) in the unprecedented range of temperatures 120 K < T < 345 K. Such pretransitional effects have not yet been reported in any plastic crystals. Results include the discovery of the experimental manifestation of the Mossotti Catastrophe behavior, so far considered only as a hypothetical paradox. The model interpretations of experimental findings are proposed. We parallel the observed pretransitional behavior with the one observed in octyloxycyanobiphenyl (8OCB), typical liquid crystal (LC), displaying a reversed sequence of phase transitions in orientational and translational degrees of order on varying temperature. Furthermore, in its nematic phase, we demonstrate first-ever observed temperature-driven crossover between regions dominated by isotropic liquid and smectic A pretransitional fluctuations. We propose a pioneering minimal model describing plastic crystal phase behavior where we mimic derivation of classical Landau-de Gennes-Ginzburg modelling of Isotropic - Nematic - Smectic A LC phase behavior.
△ Less
Submitted 9 December, 2019;
originally announced December 2019.
-
Multimode Fiber Coupled Superconducting Nanowire Single Photon Detectors with High Detection Efficiency and Time Resolution
Authors:
** Chang,
Iman Esmaeilzadeh,
Johannes W. N. Los,
Julien Zichi,
Andreas Fognini,
Monique Gevers,
Sander Dorenbos,
Silvania F. Pereira,
Paul Urbach,
Val Zwiller
Abstract:
In the past decade superconducting nanowire single photon detectors (SNSPDs) have gradually become an indispensable part of any demanding quantum optics experiment. Until now, most SNSPDs are coupled to single-mode fibers. SNSPDs coupled to multimode fibers have shown promising efficiencies but are yet to achieve high time resolution. For a number of applications ranging from quantum nano-photonic…
▽ More
In the past decade superconducting nanowire single photon detectors (SNSPDs) have gradually become an indispensable part of any demanding quantum optics experiment. Until now, most SNSPDs are coupled to single-mode fibers. SNSPDs coupled to multimode fibers have shown promising efficiencies but are yet to achieve high time resolution. For a number of applications ranging from quantum nano-photonics to bio-optics, high efficiency and high time-resolution are desired at the same time. In this paper, we demonstrate the role of polarization on the efficiency of multi-mode fiber coupled detectors, and show how it can be addressed. We fabricated high performance 20, 25 and 50μm diameter detectors targeted for visible, near infrared, and telecom wavelengths. A custom-built setup was used to simulate realistic experiments with randomized modes in the fiber. We simultaneously achieved system efficiency >80% and time resolution <20 ps and made large detectors that offer outstanding performances.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
High performance superconducting nanowire single photon detectors operating at temperature from 4 to 7 K
Authors:
Ronan Gourgues,
Johannes W. N. Los,
Julien Zichi,
** Chang,
Nima Kalhor,
Gabriele Bulgarini,
Sander N. Dorenbos,
Val Zwiller,
Iman Esmaeil Zadeh
Abstract:
We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection e…
▽ More
We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection efficiency of 82 % at 785 nm wavelength and a timing jitter of 30 $\pm$ 0.3 ps are achieved. In addition, for 1550 nm and similar operating temperature we measured a detection efficiency as high as 64 %. Finally, we show that at temperatures up to 7 K, unity internal efficiency is maintained for the visible spectrum. Our work is particularly important to allow for the large scale implementation of superconducting single photon detectors in combination with heat sources such as free-space optical windows, cryogenic electronics, microwave sources and active optical components for complex quantum optical experiments and bio-imaging.
△ Less
Submitted 21 June, 2019;
originally announced June 2019.
-
Nb$_x$Ti$_{1-x}$N low timing jitter single-photon detectors with unity internal efficiency at 1550 nm and 2.5 K
Authors:
Julien Zichi,
** Chang,
Stephan Steinhauer,
Kristina von Fieandt,
Johannes W. N. Los,
Gijs Visser,
Nima Kalhor,
Thomas Lettner,
Ali. W. Elshaari,
Iman Esmaeil Zadeh,
Val Zwiller
Abstract:
The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly…
▽ More
The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly at temperatures above 0.8 K. Devices made from niobium nitride and niobium titanium nitride allow to reach the best timing jitter, but in turn have stronger requirements in terms of film quality to achieve a high efficiency. Here we take advantage of the flexibility of reactive co-sputter deposition to tailor the composition of NbxTi1-xN superconducting films, and show that a Nb fraction of x = 0.62 allows for the fabrication of detectors from films as thick as 9 nm and covering an active area of 20 μm, with a wide detection saturation plateau at telecom wavelengths and in particular at 1550 nm. This is a signature of an internal detection efficiency saturation, achieved while maintaining the high time resolution associated with NbTiN and operation at 2.5K. With our optimized recipe, we reliably fabricated detectors with high critical current densities reaching a saturation plateau at 1550 nm with 80% system detection efficiency, and with a FWHM timing jitter as low as 19.47 ps.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Controlled integration of selected detectors and emitters in photonic integrated circuits
Authors:
Ronan Gourgues,
Iman Esmaeil Zadeh,
Ali W. Elshaari,
Gabriele Bulgarini,
Johannes W. N. Los,
Julien Zichi,
Dan Dalacu,
Philip J. Poole,
Sander N. Dorenbos,
Val Zwiller
Abstract:
Integration of superconducting nanowire single photon detectors and quantum sources with photonic waveguides is crucial for realizing advanced quantum integrated circuits. However, scalability is hindered by stringent requirements on high performance detectors. Here we overcome the yield limitation by controlled coupling of photonic channels to pre-selected detectors based on measuring critical cu…
▽ More
Integration of superconducting nanowire single photon detectors and quantum sources with photonic waveguides is crucial for realizing advanced quantum integrated circuits. However, scalability is hindered by stringent requirements on high performance detectors. Here we overcome the yield limitation by controlled coupling of photonic channels to pre-selected detectors based on measuring critical current, timing resolution, and detection efficiency. As a proof of concept of our approach, we demonstrate a hybrid on-chip full-transceiver consisting of a deterministically integrated detector coupled to a selected nanowire quantum dot through a filtering circuit made of a silicon nitride waveguide and a ring resonator filter, delivering 100 dB suppression of the excitation laser. In addition, we perform extensive testing of the detectors before and after integration in the photonic circuit and show that the high performance of the superconducting nanowire detectors, including timing jitter down to 23 $\pm$ 3 ps, is maintained. Our approach is fully compatible with wafer level automated testing in a cleanroom environment.
△ Less
Submitted 16 November, 2018; v1 submitted 30 October, 2018;
originally announced November 2018.
-
Beyond the Limits of 1D Coherent Synchrotron Radiation
Authors:
A. D. Brynes,
P. Smorenburg,
I. Akkermans,
E. Allaria,
L. Badano,
S. Brussaard,
M. Danailov,
A. Demidovich,
G. De Ninno,
D. Gauthier,
G. Gaio,
S. B. van der Geer,
L. Giannessi,
M. J. de Loos,
N. S. Mirian,
G. Penco,
P. Rebernik,
F. Rossi,
I. Setija,
S. Spampinati,
C. Spezzani,
M. Trovò,
P. H. Williams,
S. DiMitri
Abstract:
An understanding of collective effects is of fundamental importance for the design and optimisation of the performance of modern accelerators. In particular, the design of an accelerator with strict requirements on the beam quality, such as a free electron laser (FEL), is highly dependent on a correspondence between simulation, theory and experiments in order to correctly account for the effect of…
▽ More
An understanding of collective effects is of fundamental importance for the design and optimisation of the performance of modern accelerators. In particular, the design of an accelerator with strict requirements on the beam quality, such as a free electron laser (FEL), is highly dependent on a correspondence between simulation, theory and experiments in order to correctly account for the effect of coherent synchrotron radiation (CSR), and other collective effects. A traditional approach in accelerator simulation codes is to utilise an analytic one-dimensional approximation to the CSR force. We present an extension of the 1D CSR theory in order to correctly account for the CSR force at the entrance and exit of a bending magnet. A limited range of applicability to this solution, in particular in bunches with a large transverse spot size or offset from the nominal axis, is recognised. More recently developed codes calculate the CSR effect in dispersive regions directly from the Lienard-Wiechert potentials, albeit with approximations to improve the computational time. A new module of the General Particle Tracer (GPT) code was developed for simulating the effects of CSR, and benchmarked against other codes. We experimentally demonstrate departure from the commonly used 1D CSR theory for more extreme bunch length compression scenarios at the FERMI FEL facility. Better agreement is found between experimental data and the codes which account for the transverse extent of the bunch, particularly in more extreme compression scenarios.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Photon counting with photon number resolution through superconducting nanowires coupled to a multi-channel TDC in FPGA
Authors:
N. Lusardi,
J. W. N. Los,
R. B. M. Gourgues,
G. Bulgarini,
A. Geraci
Abstract:
The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a time-to-digital converter implemented into a programmable device. The combination of these devices gives high performance to the system in terms of resolution and adaptabilit…
▽ More
The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a time-to-digital converter implemented into a programmable device. The combination of these devices gives high performance to the system in terms of resolution and adaptability to the actual experimental conditions. As case of application, we present the measurement of photon statistics for coherent light states. In this measurement, we make use of 8th order single photon correlations to reconstruct with high fidelity the statistics of a coherent state with average photon number up to 4. The processing is performed by means of a Time-to-Digital Converter (TDC) architecture that also hosts an Asynchronous-Correlated-Digital-Counter (ACDC) implemented in a Field Programmable Gate Array (FPGA) device and specifically designed for performance optimization in multi-channel usage.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
A single-photon detector with high efficiency and sub-10ps time resolution
Authors:
Iman Esmaeil Zadeh,
Johannes W. N. Los,
Ronan B. M. Gourgues,
Gabriele Bulgarini,
Sergiy M. Dobrovolskiy,
Val Zwiller,
Sander N. Dorenbos
Abstract:
The observation of fast physical dynamics using optical techniques currently relies on indirect methods, such as pump-probe measurements. One reason for this is the lack of an efficient detector with high time resolution. Single-photon detectors with high efficiency and ultra-high time resolution serve as the best candidates for replacing such indirect methods. We engineer the nano-structure of Su…
▽ More
The observation of fast physical dynamics using optical techniques currently relies on indirect methods, such as pump-probe measurements. One reason for this is the lack of an efficient detector with high time resolution. Single-photon detectors with high efficiency and ultra-high time resolution serve as the best candidates for replacing such indirect methods. We engineer the nano-structure of Superconducting Nanowire Single-Photon Detectors (SNSPDs) to achieve a time resolution better than 10ps and at the same time a high efficiency (>86%). Furthermore, at the limit of multiphoton excitation, using an improved readout technique, we reach an unprecedented time resolution of <3ps. These findings set a new upper limit for the intrinsic time resolution of SNSPDs and open up new possibilities for direct observation of fast phenomena in different fields of science.
△ Less
Submitted 19 January, 2018;
originally announced January 2018.
-
Single-photon detectors combining ultra-high efficiency, detection-rates, and timing resolution
Authors:
Iman Esmaeil Zadeh,
Johannes W. N. Los,
Ronan B. M. Gourgues,
Violette Steinmetz,
Gabriele Bulgarini,
Sergiy M. Dobrovolskiy,
Val Zwiller,
Sander N. Dorenbos
Abstract:
Single-photon detection with high efficiency, high timing resolution, low dark counts and high photon detection-rates is crucial for a wide range of optical measurements. Although efficient detectors have been reported before, combining all performance parameters in a single device remains a challenge. Here, we show a broadband NbTiN superconducting nanowire detector with an efficiency exceeding 9…
▽ More
Single-photon detection with high efficiency, high timing resolution, low dark counts and high photon detection-rates is crucial for a wide range of optical measurements. Although efficient detectors have been reported before, combining all performance parameters in a single device remains a challenge. Here, we show a broadband NbTiN superconducting nanowire detector with an efficiency exceeding 92%, over 150MHz photon detection-rate, a dark count-rate below 130Hz, operated in a Gifford-McMahon cryostat. Furthermore, with careful optimization of the detector design and readout electronics, we reach an ultra-low system timing jitter of 14.80ps (13.95ps decoupled) while maintaining high detection efficiencies.
△ Less
Submitted 31 July, 2017; v1 submitted 7 November, 2016;
originally announced November 2016.
-
Inverse simulated annealing: Improvements and application to amorphous InSb
Authors:
Jan H. Los,
Silvia Gabardi,
Marco Bernasconi,
Thomas D. Kühne
Abstract:
An improved inverse simulated annealing method is presented to determine the structure of complex disordered systems from first principles in agreement with available experimental data or desired predetermined target properties. The effectiveness of this method is demonstrated by revisiting the structure of amorphous InSb. The resulting network is mostly tetrahedral and in excellent agreement with…
▽ More
An improved inverse simulated annealing method is presented to determine the structure of complex disordered systems from first principles in agreement with available experimental data or desired predetermined target properties. The effectiveness of this method is demonstrated by revisiting the structure of amorphous InSb. The resulting network is mostly tetrahedral and in excellent agreement with available experimental data.
△ Less
Submitted 4 October, 2014;
originally announced October 2014.
-
Inverse simulated annealing for the determination of amorphous structures
Authors:
Jan H. Los,
Thomas D. Kühne
Abstract:
We present a new and efficient optimization method to determine the structure of disordered systems in agreement with available experimental data. Our approach permits the application of accurate electronic structure calculations within the structure optimization. The new technique is demonstrated within density functional theory by the calculation of a model of amorphous carbon.
We present a new and efficient optimization method to determine the structure of disordered systems in agreement with available experimental data. Our approach permits the application of accurate electronic structure calculations within the structure optimization. The new technique is demonstrated within density functional theory by the calculation of a model of amorphous carbon.
△ Less
Submitted 18 April, 2013; v1 submitted 20 February, 2013;
originally announced February 2013.
-
Compression of sub-relativistic space-charge-dominated electron bunches for single-shot femtosecond electron diffraction
Authors:
T. van Oudheusden,
P. L. E. M. Pasmans,
S. B. van der Geer,
M. J. de Loos,
M. J. van der Wiel,
O. J. Luiten
Abstract:
We demonstrate compression of 95 keV, space-charge-dominated electron bunches to sub-100 fs durations. These bunches have sufficient charge (200 fC) and are of sufficient quality to capture a diffraction pattern with a single shot, which we demonstrate by a diffraction experiment on a polycrystalline gold foil. Compression is realized by means of velocity bunching as a result of a velocity chirp,…
▽ More
We demonstrate compression of 95 keV, space-charge-dominated electron bunches to sub-100 fs durations. These bunches have sufficient charge (200 fC) and are of sufficient quality to capture a diffraction pattern with a single shot, which we demonstrate by a diffraction experiment on a polycrystalline gold foil. Compression is realized by means of velocity bunching as a result of a velocity chirp, induced by the oscillatory longitudinal electric field of a 3 GHz radio-frequency cavity. The arrival time jitter is measured to be 80 fs.
△ Less
Submitted 10 June, 2010;
originally announced June 2010.
-
Formation of van der Waals molecules in buffer gas cooled magnetic traps
Authors:
N. Brahms,
T. V. Tscherbul,
P. Zhang,
J. K los,
H. R. Sadeghpour,
A. Dalgarno,
J. M. Doyle,
T. G. Walker
Abstract:
We show that a large class of helium-containing cold polar molecules form readily in a cryogenic buffer gas, achieving densities as high as 10^12 cm^-3. We explore the spin relaxation of these molecules in buffer gas loaded magnetic traps, and identify a loss mechanism based on Landau-Zener transitions arising from the anisotropic hyperfine interaction. Our results show that the recently observed…
▽ More
We show that a large class of helium-containing cold polar molecules form readily in a cryogenic buffer gas, achieving densities as high as 10^12 cm^-3. We explore the spin relaxation of these molecules in buffer gas loaded magnetic traps, and identify a loss mechanism based on Landau-Zener transitions arising from the anisotropic hyperfine interaction. Our results show that the recently observed strong T^6 thermal dependence of spin change in buffer gas trapped silver (Ag) is accounted for by the formation and spin change of AgHe, thus providing evidence for molecular formation in a buffer gas trap.
△ Less
Submitted 28 April, 2011; v1 submitted 3 March, 2010;
originally announced March 2010.
