-
Fracture Diodes: Directional asymmetry of fracture toughness
Authors:
N. R. Brodnik,
S. Brach,
C. M. Long,
G. Ravichandran,
B. Bourdin,
K. T. Faber,
K. Bhattacharya
Abstract:
Toughness describes the ability of a material to resist fracture or crack propagation. It is demonstrated here that fracture toughness of a material can be asymmetric, i.e., the resistance of a medium to a crack propagating from right to left can be significantly different from that to a crack propagating from left to right. Such asymmetry is unknown in natural materials, but we show that it can b…
▽ More
Toughness describes the ability of a material to resist fracture or crack propagation. It is demonstrated here that fracture toughness of a material can be asymmetric, i.e., the resistance of a medium to a crack propagating from right to left can be significantly different from that to a crack propagating from left to right. Such asymmetry is unknown in natural materials, but we show that it can be built into artificial materials through the proper control of microstructure. This paves the way for control of crack paths and direction, where fracture -- when unavoidable -- can be guided through pre-designed paths to minimize loss of critical components.
△ Less
Submitted 9 October, 2021;
originally announced October 2021.
-
Comb-Based Radio-Frequency Photonic Filters with Rapid Tunability and High Selectivity
Authors:
V. R. Supradeepa,
Christopher M. Long,
Rui Wu,
Fahmida Ferdous,
Ehsan Hamidi,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed…
▽ More
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed, realization of programmable filters with highly selective filter lineshapes and rapid reconfigurability has faced significant challenges. A new approach for RF photonic filters based on frequency combs offers a potential route to simultaneous high stopband attenuation, fast tunability, and bandwidth reconfiguration. In one configuration tuning of the RF passband frequency is demonstrated with unprecedented (~40 ns) speed by controlling the optical delay between combs. In a second, fixed filter configuration, cascaded four-wave mixing simultaneously broadens and smoothes comb spectra, resulting in Gaussian RF filter lineshapes exhibiting extremely high (>60 dB) main lobe to sidelobe suppression ratio and (>70 dB) stopband attenuation.
△ Less
Submitted 25 June, 2012; v1 submitted 3 May, 2011;
originally announced May 2011.
-
Gaussian-shaped Optical Frequency Comb Generation for Microwave Photonic Filtering
Authors:
Rui Wu,
Christopher M. Long,
Ehsan Hamidi,
V. R. Supradeepa,
Min Hyup Song,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
△ Less
Submitted 21 April, 2011; v1 submitted 20 April, 2011;
originally announced April 2011.
-
Generation of very flat optical frequency combs from continuous-wave lasers using cascaded intensity and phase modulators driven by tailored radio frequency waveforms
Authors:
Rui Wu,
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by t…
▽ More
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by the power handling capability of the phase modulator, and this can be scaled without compromising the spectral flatness. Furthermore, the spectral phase of the generated combs in our scheme is almost purely quadratic which, as we will demonstrate, allows for very high quality pulse compression using only single mode fiber.
△ Less
Submitted 23 September, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
Self-referenced characterization of optical frequency combs and arbitrary waveforms using a simple, linear, zero-delay implementation of spectral shearing interferometry
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-w…
▽ More
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-wave laser. This technique is easy to implement, requiring only an intensity modulator and an optical spectrum analyzer (OSA), and is demonstrated to work at average power levels down to 100nW (10aJ/pulse at 10 GHz). By exploiting the long coherence lengths of these frequency combs and the self-referenced nature of the measurement, we also demonstrate a simple single-ended measurement of dispersion and dispersion slope in long lengths of fiber (>25km).
△ Less
Submitted 23 September, 2010; v1 submitted 31 October, 2009;
originally announced November 2009.
-
Fast Characterization of Dispersion and Dispersion Slope of Optical Fiber Links using Spectral Interferometry with Frequency Combs
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled w…
▽ More
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled with fast data acquisition, enable spectral interferometric characterization of fibers longer by several orders of magnitude. We expect that our method will be useful to recently proposed lightwave techniques like coherent WDM and to coherent modulation formats by providing a real time monitoring capability for the link dispersion. Another area of application would be in stabilization of systems which perform frequency and timing distribution over long fiber links using stabilized optical frequency combs.
△ Less
Submitted 1 February, 2010; v1 submitted 23 July, 2009;
originally announced July 2009.
