-
Selective active resonance tuning for multi-mode nonlinear photonic cavities
Authors:
Alan D. Logan,
Nicholas S. Yama,
Kai-Mei C. Fu
Abstract:
Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tu…
▽ More
Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tune modes in a multi-resonant nonlinear cavity is particularly attractive because it allows the extension of a single physical tuning mechanism, such as thermal tuning, to provide the required independent controls. Here we model and simulate the performance and tradeoffs of a coupled-resonator tuning scheme which uses auxiliary resonators to tune specific modes of a multi-resonant nonlinear process. Our analysis determines the tuning bandwidth for steady-state mode field intensity can significantly exceed the inter-cavity coupling rate if the total quality factor of the auxiliary resonator is higher than the multi-mode main resonator. Consequently, over-coupling a nonlinear resonator mode to improve the maximum efficiency of a frequency conversion process will simultaneously expand the auxiliary resonator tuning bandwidth for that mode, indicating a natural compatibility with this tuning scheme. We apply the model to an existing small-diameter triply-resonant ring resonator design and find that a tuning bandwidth of 136 GHz ~ 1.1 nm can be attained for a mode in the telecom band while limiting excess scattering losses to a quality factor of 10^6. Such range would span the distribution of inhomogeneously broadened quantum emitter ensembles as well as resonator fabrication variations, indicating the potential for the auxiliary resonators to enable not only low-loss telecom conversion but also the generation of indistinguishable photons in a quantum network.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Triply-Resonant Sum Frequency Conversion with Gallium Phosphide Ring Resonators
Authors:
Alan D. Logan,
Shivangi Shree,
Srivatsa Chakravarthi,
Nicholas Yama,
Christian Pederson,
Karine Hestroffer,
Fariba Hatami,
Kai-Mei C. Fu
Abstract:
We demonstrate quasi-phase matched, triply-resonant sum frequency conversion in 10.6-um-diameter integrated gallium phosphide ring resonators. A small-signal, waveguide-to-waveguide power conversion efficiency of 8%/mW is measured for conversion from telecom (1536 nm) and near infrared (1117 nm) to visible (647 nm) wavelengths with an absolute power conversion efficiency of 6.3% measured at satura…
▽ More
We demonstrate quasi-phase matched, triply-resonant sum frequency conversion in 10.6-um-diameter integrated gallium phosphide ring resonators. A small-signal, waveguide-to-waveguide power conversion efficiency of 8%/mW is measured for conversion from telecom (1536 nm) and near infrared (1117 nm) to visible (647 nm) wavelengths with an absolute power conversion efficiency of 6.3% measured at saturation pump power. For the complementary difference frequency generation process, a single photon conversion efficiency of 7.2%/mW from visible to telecom is projected for resonators with optimized coupling. Efficient conversion from visible to telecom will facilitate long-distance transmission of spin-entangled photons from solid-state emitters such as the diamond NV center, allowing long-distance entanglement for quantum networks.
△ Less
Submitted 16 August, 2022; v1 submitted 13 August, 2022;
originally announced August 2022.
-
Target-wavelength-trimmed second harmonic generation with gallium phosphide-on-nitride ring resonators
Authors:
Lillian Thiel,
Alan D. Logan,
Srivatsa Chakravarthi,
Shivangi Shree,
Karine Hestroffer,
Fariba Hatami,
Kai-Mei C. Fu
Abstract:
We demonstrate post-fabrication target-wavelength trimming with a gallium phosphide on silicon nitride integrated photonic platform using controlled electron-beam exposure of hydrogen silsesquioxane cladding. A linear relationship between the electron-beam exposure dose and resonant wavelength red-shift enables deterministic, individual trimming of multiple devices on the same chip to within 30 pm…
▽ More
We demonstrate post-fabrication target-wavelength trimming with a gallium phosphide on silicon nitride integrated photonic platform using controlled electron-beam exposure of hydrogen silsesquioxane cladding. A linear relationship between the electron-beam exposure dose and resonant wavelength red-shift enables deterministic, individual trimming of multiple devices on the same chip to within 30 pm of a single target wavelength. Second harmonic generation from telecom to near infrared at a target wavelength is shown in multiple devices with quality factors on the order of $10^4$. Post-fabrication tuning is an essential tool for targeted wavelength applications including quantum frequency conversion
△ Less
Submitted 8 October, 2021; v1 submitted 7 October, 2021;
originally announced October 2021.
-
400%/W second harmonic conversion efficiency in $\mathrm{14 μm}$-diameter gallium phosphide-on-oxide resonators
Authors:
Alan D. Logan,
Michael Gould,
Emma R. Schmidgall,
Karine Hestroffer,
Zin Lin,
Weiliang **,
Arka Majumdar,
Fariba Hatami,
Alejandro W. Rodriguez,
Kai-Mei C. Fu
Abstract:
Second harmonic conversion from 1550~nm to 775~nm with an efficiency of 400% W$^{-1}$ is demonstrated in a gallium phosphide (GaP) on oxide integrated photonic platform. The platform consists of doubly-resonant, phase-matched ring resonators with quality factors $Q \sim 10^4$, low mode volumes $V \sim 30 (λ/n)^3$, and high nonlinear mode overlaps. Measurements and simulations indicate that convers…
▽ More
Second harmonic conversion from 1550~nm to 775~nm with an efficiency of 400% W$^{-1}$ is demonstrated in a gallium phosphide (GaP) on oxide integrated photonic platform. The platform consists of doubly-resonant, phase-matched ring resonators with quality factors $Q \sim 10^4$, low mode volumes $V \sim 30 (λ/n)^3$, and high nonlinear mode overlaps. Measurements and simulations indicate that conversion efficiencies can be increased by a factor of 20 by improving the waveguide-cavity coupling to achieve critical coupling in current devices.
△ Less
Submitted 10 October, 2018;
originally announced October 2018.
