-
Gateway to all-optical spin switching in Heusler ferrimagnets: Pancharatnam-Berry tensor and magnetic moment ratio
Authors:
G. P. Zhang,
Y. Q. Liu,
M. S. Si,
Nicholas Allbritton,
Y. H. Bai,
Wolfgang Hübner,
Thomas F. George
Abstract:
All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-bas…
▽ More
All-optical spin switching (AOS) is a new phenomenon found in a small group of magnetic media, where a single laser pulse can switch spins from one direction to another, without assistance of a magnetic field, on a time scale much shorter than existing magnetic technology. However, despite intensive efforts over a decade, its underlying working principle remains elusive. Here through manganese-based Heusler ferrimagnets, we show that a group of flat bands around the Fermi level act as gateway states to form efficient channels or spin switching, where their noncentrosymmetry allows us to correlate the spin dynamics to the second-order optical response. To quantify their efficacy, we introduce the third-rank Pancharatnam-Berry tensor (PB tensor), $\boldsymbolη^{(3)}=\langle i |{\bf p} |m\rangle \langle m|{\bf p} |f\rangle \langle f|{\bf p} |i\rangle,$ where $|i\rangle$, $|m\rangle$ and $|f\rangle$ are initial, intermediate and final band states, respectively, and ${\bf p}$ is the momentum operator. A picture emerges: Those which show AOS, such as the recently discovered Mn$_2$RuGa, always have a large PB tensor element} but have a small sublattice spin moment ratio, consistent with the prior experimental small remanence criterion. This does not only reveal that the delicate balance between the large PB tensor element and the small sublattice spin ratio plays a decisive role in AOS, but also, conceptually, connects the $n$th-order nonlinear optics to $(n+1)$th-rank PB tensors in general.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Nonlinear harmonic spectra in bilayer van der Waals antiferromagnets CrX$_{3}$
Authors:
Y. Q. Liu,
M. S. Si,
G. P. Zhang
Abstract:
Bilayer antiferromagnets CrX$_{3}$ (X $=$ Cl, Br, and I) are promising materials for spintronics and optoelectronics that are rooted in their peculiar electronic structures. However, their bands are often hybridized from the interlayer antiferromagnetic ordering, which are difficult to disentangle by traditional methods. In this work, we theoretically show that nonlinear harmonic spectra can diffe…
▽ More
Bilayer antiferromagnets CrX$_{3}$ (X $=$ Cl, Br, and I) are promising materials for spintronics and optoelectronics that are rooted in their peculiar electronic structures. However, their bands are often hybridized from the interlayer antiferromagnetic ordering, which are difficult to disentangle by traditional methods. In this work, we theoretically show that nonlinear harmonic spectra can differentiate subtle differences in their electronic states. In contrast to prior nonlinear optical studies which often use one or two photon energies, we systematically study the wavelength-dependent nonlinear harmonic spectra realized by hundreds of individual dynamical simulations under changed photon energies. Through turning on and off some excitation channels, we can pinpoint every dipole-allowed transition that largely contributes to the second and third harmonics. With the help of momentum matrix elements, highly entangled resonance peaks at a higher energy above the band edge can be assigned to specific transitions between the valence bands and three separate regions of conduction bands. Our findings demonstrate a feasible means to detect very complex electronic structures in an important family of two-dimensional antiferromagnets.
△ Less
Submitted 17 February, 2024;
originally announced February 2024.
-
Heuristic predictions of RMP configurations for ELM suppression in ITER burning plasmas and their impact on divertor performance
Authors:
H. Frerichs,
J. van Blarcum,
Y. Feng,
L. Li,
Y. Q. Liu,
A. Loarte,
J. -K. Park,
R. A. Pitts,
O. Schmitz,
S. M. Yang
Abstract:
A subspace of resonant magnetic perturbation (RMP) configurations for edge localized mode (ELM) suppression is predicted for H-mode burning plasmas at 15 MA current and 5.3 T magnetic field in ITER. Perturbation of the core plasma can be reduced by a factor of 2 for equivalent edge stability proxies, while the perturbed plasma boundary geometry remains mostly resilient. The striation width of pert…
▽ More
A subspace of resonant magnetic perturbation (RMP) configurations for edge localized mode (ELM) suppression is predicted for H-mode burning plasmas at 15 MA current and 5.3 T magnetic field in ITER. Perturbation of the core plasma can be reduced by a factor of 2 for equivalent edge stability proxies, while the perturbed plasma boundary geometry remains mostly resilient. The striation width of perturbed field lines connecting from the main plasma (normalized poloidal flux $< 1$) to the divertor targets is found to be significantly larger than the expected heat load width in the absence of RMPs. This facilitates heat load spreading with peak values at an acceptable level below 10 MW m${}^{-2}$ on the outer target already at moderate gas fueling and low Ne seeding for additional radiative dissipation of the 100 MW of power into the scrape-off layer (SOL). On the inner target, however, re-attachment is predicted away from the equilibrium strike point due to increased upstream heat flux, higher downstream temperature and less efficient impurity radiation.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
ITER-IA 3D MHD Simulations of Shattered Pellet Injection(SPI)- D1.1 Optimization of the SPI model
Authors:
Charlson. C. Kim,
B. C. Lyons,
Y. Q. Liu,
J. T. McClenaghan,
P. B. Parks,
L. L. Lao
Abstract:
This report is in partial fulfillment of deliverable D1.1 Optimization of the SPI model and summarizes axisymmetric ITER SPI parameter scans performed by the NIMROD code for several ITER equilibria. These axisymmetric parameter scans are to assess the sensitivity of various injection parameters in preparation for 3D MHD SPI simulations. The scans are comprised of 5 scenarios: S1 - fragment size sc…
▽ More
This report is in partial fulfillment of deliverable D1.1 Optimization of the SPI model and summarizes axisymmetric ITER SPI parameter scans performed by the NIMROD code for several ITER equilibria. These axisymmetric parameter scans are to assess the sensitivity of various injection parameters in preparation for 3D MHD SPI simulations. The scans are comprised of 5 scenarios: S1 - fragment size scan : 3 uniform pencil beam, 1 distributed size pencil beam S2 - velocity scan : v = [250,500,750]m/s S3 - velocity dispersion scan : dv/v = [0.2,0.4] (linear distribution) S4 - poloidal extent of plume : [15' ,45' ] (linear distribution) (dv/v=0.2) S5 - poloidal injection angle : +/-[20' ,45' ] (dv/v=0.2) These scans are performed with several ITER equilibria representative of the operating range, from low current and thermal energy (H123 5MA, 29MJ Hydrogen H-mode) to high current and high thermal energy (DT24 15MA, 370MJ D-T H-mode).
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
ITER-IA 3D MHD Simulations of Shattered Pellet Injection(SPI) -- D1.3 Code Validation (DIII-D)
Authors:
Charlson. C. Kim,
T. Bechtel,
J. L. Herfindal,
B. C. Lyons,
Y. Q. Liu,
P. B. Parks,
L. Lao
Abstract:
This report is in partial fulfillment of deliverable D1.3 Code Validation (DIII-D). These simulations focus on thermal quench phase of the SPI mitigation and are not typically carried beyond it to the current spike and subsequent current quench. NIMROD SPI simulations[1] are validated against DIII-D experiments. The target plasma for these simulations is DIII-D 160606@02990ms.
This report is in partial fulfillment of deliverable D1.3 Code Validation (DIII-D). These simulations focus on thermal quench phase of the SPI mitigation and are not typically carried beyond it to the current spike and subsequent current quench. NIMROD SPI simulations[1] are validated against DIII-D experiments. The target plasma for these simulations is DIII-D 160606@02990ms.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
Strong and nearly 100$\%$ spin-polarized second-harmonic generation from ferrimagnet Mn$_{2}$RuGa
Authors:
Y. Q. Liu,
M. S. Si,
G. P. Zhang
Abstract:
Second-harmonic generation (SHG) has emerged as a promising tool for detecting electronic and magnetic structures in noncentrosymmetric materials, but 100$\%$ spin-polarized SHG has not been reported. In this work, we demonstrate nearly 100$\%$ spin-polarized SHG from half-metallic ferrimagnet Mn$_{2}$RuGa. A band gap in the spin-down channel suppresses SHG, so the spin-up channel contributes near…
▽ More
Second-harmonic generation (SHG) has emerged as a promising tool for detecting electronic and magnetic structures in noncentrosymmetric materials, but 100$\%$ spin-polarized SHG has not been reported. In this work, we demonstrate nearly 100$\%$ spin-polarized SHG from half-metallic ferrimagnet Mn$_{2}$RuGa. A band gap in the spin-down channel suppresses SHG, so the spin-up channel contributes nearly all the signal, as large as 3614 pm/V about 10 times larger than that of GaAs. In the spin-up channel, $χ_{xyz}^{(2)}$ is dominated by the large intraband current in three highly dispersed bands near the Fermi level. With the spin-orbit coupling (SOC), the reduced magnetic point group allows additional SHG components, where the interband contribution is enhanced. Our finding is important as it predicts a large and complete spin-polarized SHG in a all-optical spin switching ferrimagnet. This opens the door for future applications.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Extension of ELM suppression window using n=4 RMPs in EAST
Authors:
P. Xie,
Y. Sun,
Q. Ma,
S. Gu,
Y. Q. Liu,
M. Jia,
A. Loarte,
X. Wu,
Y. Chang,
T. Jia,
T. Zhang,
Z. Zhou,
Q. Zang,
B. Lyu,
S. Fu,
H. Sheng,
C. Ye,
H. Yang,
H. H. Wang,
EAST Contributors
Abstract:
The q95 window for Type-I Edge Localized Modes (ELMs) suppression using n=4 even parity Resonant Magnetic Perturbations (RMPs) has been significantly expanded to a range from 3.9 to 4.8, which is demonstrated to be reliable and repeatable in EAST over the last two years. This window is significantly wider than the previous one, which is around q95=3.7pm0.1, and is achieved using n=4 odd parity RMP…
▽ More
The q95 window for Type-I Edge Localized Modes (ELMs) suppression using n=4 even parity Resonant Magnetic Perturbations (RMPs) has been significantly expanded to a range from 3.9 to 4.8, which is demonstrated to be reliable and repeatable in EAST over the last two years. This window is significantly wider than the previous one, which is around q95=3.7pm0.1, and is achieved using n=4 odd parity RMPs. Here, n represents the toroidal mode number of the applied RMPs and q95 is the safety factor at the 95% normalized poloidal magnetic flux. During ELM suppression, there is only a slight drop in the stored energy (<=10%). The comparison of pedestal density profiles suggests that ELM suppression is achieved when the pedestal gradient is kept lower than a threshold. This wide q95 window for ELM suppression is consistent with the prediction made by MARS-F modeling prior to the experiment, in which it is located at one of the resonant q95 windows for plasma response. The Chirikov parameter taking into account plasma response near the pedestal top, which measures the plasma edge stochasticity, significantly increases when q95 exceeds 4, mainly due to denser neighboring rational surfaces. Modeling of plasma response by the MARS-F code shows a strong coupling between resonant and non-resonant components across the pedestal region, which is characteristic of the kink-peeling like response observed during RMP-ELM suppression in previous studies on EAST. These promising results show the reliability of ELM suppression using the n=4 RMPs and expand the physical understanding on ELM suppression mechanism.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser
Authors:
A. X. Li,
C. Y. Qin,
H. Zhang,
S. Li,
L. L. Fan,
Q. S. Wang,
T. J. Xu,
N. W. Wang,
L. H. Yu,
Y. Xu,
Y. Q. Liu,
C. Wang,
X. L. Wang,
Z. X. Zhang,
X. Y. Liu,
P. L. Bai,
Z. B. Gan,
X. B. Zhang,
X. B. Wang,
C. Fan,
Y. J. Sun,
Y. H. Tang,
B. Yao,
X. Y. Liang,
Y. X. Leng
, et al. (3 additional authors not shown)
Abstract:
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 1…
▽ More
We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Optimizing beam-ion confinement in ITER by adjusting the toroidal phase of the 3-D magnetic fields applied for ELM control
Authors:
L. Sanchis,
M. Garcia-Munoz,
E. Viezzer,
A. Loarte,
L. Li,
Y. Q. Liu,
A. Snicker,
L. Chen,
F. Zonca,
S. D. Pinches,
D. Zarzoso
Abstract:
The confinement of Neutral Beam Injection (NBI) particles in the presence of n=3 Resonant Magnetic Perturbations (RMPs) in 15 MA ITER DT plasmas has been studied using full orbit ASCOT simulations. Realistic NBI distribution functions, and 3D wall and equilibria, including the plasma response to the externally applied 3D fields calculated with MARS-F, have been employed. The observed total fast-io…
▽ More
The confinement of Neutral Beam Injection (NBI) particles in the presence of n=3 Resonant Magnetic Perturbations (RMPs) in 15 MA ITER DT plasmas has been studied using full orbit ASCOT simulations. Realistic NBI distribution functions, and 3D wall and equilibria, including the plasma response to the externally applied 3D fields calculated with MARS-F, have been employed. The observed total fast-ion losses depend on the poloidal spectra of the applied n=3 RMP as well as on the absolute toroidal phase of the applied perturbation with respect to the NBI birth distribution. The absolute toroidal phase of the RMP perturbation does not affect the ELM control capabilities, which makes it a key parameter in the confinement optimization. The physics mechanisms underlying the observed fast-ion losses induced by the applied 3D fields have been studied in terms of the variation of the particle canonical angular momentum ($δP_φ$) induced by the applied 3D fields. The presented simulations indicate that the transport is located in an Edge Resonant Transport Layer (ERTL) as observed previously in ASDEX Upgrade studies. Similarly, our results indicate that an overlap** of several linear and nonlinear resonances at the edge of the plasma might be responsible for the observed fast-ion losses. The results presented here may help to optimize the RMP configuration with respect to the NBI confinement in future ITER discharges.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
The Design and Performance of Charged Particle Detector onboard the GECAM Mission
Authors:
Y. B. Xu,
X. L. Sun,
S. Yang,
X. Q. Li,
W. X. Peng,
K. Gong,
X. H. Liang,
Y. Q. Liu,
D. Y. Guo,
H. Wang,
C. Y. Li,
Z. H. An,
J. J. He,
X. J. Liu,
S. L. Xiong,
X. Y. Wen,
Fan Zhang,
D. L. Zhang,
X. Y. Zhao,
C. Y. Zhang,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du
, et al. (25 additional authors not shown)
Abstract:
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is us…
▽ More
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is used to measure charged particles in the space environment, monitor energy and flow intensity changes, and identify between gamma-ray bursts and space charged particle events in conjunction with GRD. CPD uses plastic scintillator as the sensitive material for detection, silicon photomultiplier (SiPM) array as the optically readable device, and the inlaid Am-241 radioactive source as the onboard calibration means. In this paper, we will present the working principle, physical design, functional implementation and preliminary performance test results of the CPD.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Inflight performance of the GECAM Gamma-ray and Charge particle Detectors
Authors:
X. Q. Li,
X. Y. Wen,
S. L. Xiong,
K. Gong,
D. L. Zhang,
Z. H. An,
Y. B. Xu,
Y. Q. Liu,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
M. Gao,
R. Gao,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Li,
C. Y. Li,
G. Li,
L. Li,
Q. X. Li,
X. F. Li
, et al. (34 additional authors not shown)
Abstract:
The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020…
▽ More
The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020 , we carried out a series of on orbit tests. This paper introduces the test results of the GECAM-B satellite. According to the in-flight performance, the energy band for gamma-ray detection of GECAM-B is from about 7 keV to 3.5 MeV. GECAM-B can achieve prompt localization of GRBs. For the first time, GECAM-B realized a quasi-real-time transmission of trigger information using Beidou-3 RDSS. Keywords GECAM, gamma-ray burst, gravitational wave, GRD, CPD
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Quality assurance test and Failure Analysis of SiPM Arrays of GECAM Satellites
Authors:
D. L. Zhang,
M. Gao,
X. L. Sun,
X. Q. Li,
Z. H. An,
X. Y. Wen,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
R. Gao,
K. Gong,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Y. Li,
G. Li,
L. Li,
X. F. Li,
M. S. Li,
X. H. Liang,
X. J. Liu,
Y. Q. Liu
, et al. (23 additional authors not shown)
Abstract:
The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) satellite consists of two small satellites. Each GECAM payload contains 25 gamma ray detectors (GRD) and 8 charged particle detectors (CPD). GRD is the main detector which can detect gamma-rays and particles and localize the Gamma-Ray Bursts (GRB),while CPD is used to help GRD to discriminate gamma-ray bursts an…
▽ More
The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) satellite consists of two small satellites. Each GECAM payload contains 25 gamma ray detectors (GRD) and 8 charged particle detectors (CPD). GRD is the main detector which can detect gamma-rays and particles and localize the Gamma-Ray Bursts (GRB),while CPD is used to help GRD to discriminate gamma-ray bursts and charged particle bursts. The GRD makes use of lanthanum bromide (LaBr3) crystal readout by SiPM. As the all available SiPM devices belong to commercial grade, quality assurance tests need to be performed in accordance with the aerospace specifications. In this paper, we present the results of quality assurance tests, especially a detailed mechanism analysis of failed devices during the development of GECAM. This paper also summarizes the application experience of commercial-grade SiPM devices in aerospace payloads, and provides suggestions for forthcoming SiPM space applications.
△ Less
Submitted 9 December, 2021; v1 submitted 1 September, 2021;
originally announced September 2021.
-
Development of CFETR scenarios with self-consistent core-pedestal coupled simulations
Authors:
Zhao Deng,
L. L. Lao,
V. S. Chan,
R. Prater,
J. Li,
Jiale Chen,
X. Jian,
N. Shi,
O. Meneghini,
G. M. Staebler,
Y. Q. Liu,
A. D. Turnbull,
J. Candy,
S. P. Smith,
P. B. Snyder,
CFETR physics team
Abstract:
This paper develops two non-inductive steady state scenarios for larger size configuration of China Fusion Engineering Test Reactor (CFETR) with integrated modeling simulations. A self-consistent core-pedestal coupled workflow for CFETR is developed under integrated modeling framework OMFIT, which allows more accurate evaluation of CFETR performance. The workflow integrates equilibrium code EFIT,…
▽ More
This paper develops two non-inductive steady state scenarios for larger size configuration of China Fusion Engineering Test Reactor (CFETR) with integrated modeling simulations. A self-consistent core-pedestal coupled workflow for CFETR is developed under integrated modeling framework OMFIT, which allows more accurate evaluation of CFETR performance. The workflow integrates equilibrium code EFIT, transport codes ONETWO and TGYRO, and pedestal code EPED. A fully non-inductive baseline phase I scenario is developed with the workflow, which satisfies the minimum goal of Fusion Nuclear Science Facility. Compared with previous work, which proves the larger size and higher toroidal field CFETR configuration than has the advantages of reducing heating and current drive requirements, lowering divertor and wall power loads, allowing higher bootstrap current fraction and better confinement. A fully non-inductive high-performance phase II scenario is developed, which explores the alpha-particle dominated self-heating regime. Phase II scenario achieves the target of fusion power Pfus>1GW and fusion gain Qfus>20, and it largely reduces auxiliary heating and current drive power. Moreover, the large neutron production of phase II increases the energy generation power and tritium breeding rate.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
The effects of resonant magnetic perturbations and charge-exchange reactions on fast ion confinement and neutron emission in the Mega Amp Spherical Tokamak
Authors:
K G McClements,
K Tani,
R J Akers,
Y Q Liu,
K Shinohara,
H Tsutsui,
S Tsuji-Iio
Abstract:
The application of non-axisymmetric resonant magnetic perturbations (RMPs) to low current plasmas in the Mega Amp Spherical Tokamak (MAST) was found to be correlated with substantial drops in neutron production, suggesting a significant degradation of fast ion confinement. The effects of such perturbations on fast ions in MAST have been modelled using a revised version of a non-steady-state orbit-…
▽ More
The application of non-axisymmetric resonant magnetic perturbations (RMPs) to low current plasmas in the Mega Amp Spherical Tokamak (MAST) was found to be correlated with substantial drops in neutron production, suggesting a significant degradation of fast ion confinement. The effects of such perturbations on fast ions in MAST have been modelled using a revised version of a non-steady-state orbit-following Monte-Carlo code (NSS OFMC), in which the parametrization of fusion reaction rates has been updated and neutron rates have been recalculated. Losses of fast ions via charge-exchange (CX) with background neutrals and the subsequent reionization of fast neutrals due to collisions with bulk plasma particles have also been taken into account. The effects of the plasma response to externally-applied RMPs have been included in the modelling. The updated results show that computed neutron rates in the presence of RMPs with the plasma response and CX reactions taken into account agree very well with the experimental data throughout the analysis target time. CX reactions play an important role in determining the neutron rates, in particular before the onset of RMPs.
△ Less
Submitted 15 June, 2018;
originally announced June 2018.
-
Plasma response measurements of external magnetic perturbations using electron cyclotron emission and comparisons to 3D ideal MHD equilibrium
Authors:
M. Willensdorfer,
S. S. Denk,
E. Strumberger,
W. Suttrop,
B. Vanovac,
D. Brida,
M. Cavedon,
I. Classen,
M. Dunne,
S. Fietz,
R. Fischer,
A. Kirk,
F. M. Laggner,
Y. Q. Liu,
T. Odstrcil,
D. A. Ryan,
E. Viezzer,
H. Zohm,
I. C. Luhmann
Abstract:
The plasma response from an external n = 2 magnetic perturbation field in ASDEX Upgrade has been measured using mainly electron cyclotron emission (ECE) diagnostics and a rigid rotating field. To interpret ECE and ECE-imaging (ECE-I) measurements accurately, forward modeling of the radiation transport has been combined with ray tracing. The measured data is compared to synthetic ECE data generated…
▽ More
The plasma response from an external n = 2 magnetic perturbation field in ASDEX Upgrade has been measured using mainly electron cyclotron emission (ECE) diagnostics and a rigid rotating field. To interpret ECE and ECE-imaging (ECE-I) measurements accurately, forward modeling of the radiation transport has been combined with ray tracing. The measured data is compared to synthetic ECE data generated from a 3D ideal magnetohydrodynamics (MHD) equilibrium calculated by VMEC. The measured amplitudes of the helical displacement around the low field side midplane are in reasonable agreement with the one from the synthetic VMEC diagnostics. Both exceed the prediction from the vacuum field calculations and indicate the presence of a kink response at the edge, which amplifies the perturbation. VMEC and MARS-F have been used to calculate the properties of this kink mode. The poloidal mode structure of the magnetic perturbation of this kink mode at the edge peaks at poloidal mode numbers larger than the resonant components |m| > |nq|, whereas the poloidal mode structure of its displacement is almost resonant |m| ~ |nq|. This is expected from ideal MHD in the proximity of rational surfaces. The displacement measured by ECE-I confirms this resonant response.
△ Less
Submitted 4 August, 2016; v1 submitted 30 March, 2016;
originally announced March 2016.
-
The Role of Thermal Conduction in Tearing Mode Theory
Authors:
J. W. Connor,
C. J. Ham,
R. J. Hastie,
Y. Q. Liu
Abstract:
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situation…
▽ More
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situations with finite plasma pressure that are stabilised by favourable average curvature in a simple resistive MHD model. We also demonstrate that the same code can also be used to calculate the basis-functions [C J Ham, et al, Plasma Phys. Control. Fusion 54 (2012) 105014] needed to construct Delta.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
ELM mitigation via rotating resonant magnetic perturbations on MAST
Authors:
A. J. Thornton,
A. Kirk,
P. Cahyna,
I. T. Chapman,
G. Fishpool,
J. R. Harrison,
Y. Q. Liu,
L. Kripner,
M. Peterka,
the MAST Team
Abstract:
The application of resonant magnetic perturbations (RMPs) produces splitting of the divertor strike point due to the interaction of the RMP field and the plasma field. The application of a rotating RMP field causes the strike point splitting to rotate, distributing the particle and heat flux evenly over the divertor. The RMP coils in MAST have been used to generate a rotating perturbation with a t…
▽ More
The application of resonant magnetic perturbations (RMPs) produces splitting of the divertor strike point due to the interaction of the RMP field and the plasma field. The application of a rotating RMP field causes the strike point splitting to rotate, distributing the particle and heat flux evenly over the divertor. The RMP coils in MAST have been used to generate a rotating perturbation with a toroidal mode number n=3. The ELM frequency is doubled with the application of the RMP rotating field, whilst maintaining the H mode. During mitigation, the ELM peak heat flux is seen to be reduced by 50% for a halving in the ELM energy and motion of the strike point, consistent with the rotation of the applied RMP field, is seen using high spatial resolution (1.5mm at the target) heat flux profiles measured using infrared (IR) thermography.
△ Less
Submitted 9 October, 2014;
originally announced October 2014.
-
The silicon matrix for the prototype for the Dark Matter Particle Explorer
Authors:
R. R. Fan,
F. Zhang,
W. X. Peng,
Y. F. Dong,
K. Gong,
S. Yang,
D. Y. Guo,
J. Z. Wang,
M. Gao,
X. H. Liang,
J. Y. Zhang,
X. Z. Cui,
Y. Q. Liu,
H. Y. Wang
Abstract:
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position…
▽ More
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position detection while the prototype testing of the DAMPE. This matrix is composed by the 180 silicon PIN detectors, which covers an area of 32*20 cm2. The primary testing results are shown including MIPs energy spectrum and the position sensitive map.
△ Less
Submitted 19 May, 2014; v1 submitted 7 March, 2014;
originally announced March 2014.
-
Tearing mode stability calculations with pressure flattening
Authors:
C J Ham,
J W Connor,
S C Cowley,
R J Hastie,
T C Hender,
Y Q Liu
Abstract:
Calculations of tearing mode stability in tokamaks split conveniently into an external region, where marginally stable ideal MHD is applicable, and a resonant layer around the rational surface where sophisticated kinetic physics is needed. These two regions are coupled by the stability parameter. Pressure and current perturbations localized around the rational surface alter the stability of tearin…
▽ More
Calculations of tearing mode stability in tokamaks split conveniently into an external region, where marginally stable ideal MHD is applicable, and a resonant layer around the rational surface where sophisticated kinetic physics is needed. These two regions are coupled by the stability parameter. Pressure and current perturbations localized around the rational surface alter the stability of tearing modes. Equations governing the changes in the external solution and - are derived for arbitrary perturbations in axisymmetric toroidal geometry. The relationship of - with and without pressure flattening is obtained analytically for four pressure flattening functions. Resistive MHD codes do not contain the appropriate layer physics and therefore cannot predict stability directly. They can, however, be used to calculate -. Existing methods (Ham et al. 2012 Plasma Phys. Control. Fusion 54 025009) for extracting - from resistive codes are unsatisfactory when there is a finite pressure gradient at the rational surface and favourable average curvature because of the Glasser stabilizing effect. To overcome this difficulty we introduce a specific pressure flattening function that allows the earlier approach to be used. The technique is first tested numerically in cylindrical geometry with an artificial favourable curvature. Its application to toroidal geometry is then demonstrated using the toroidal tokamak tearing mode stability code T7 (Fitzpatrick et al. 1993 Nucl. Fusion 33 1533) which uses an approximate analytic equilibrium. The prospects for applying this approach to resistive MHD codes such as MARS-F (Liu et al. 2000 Phys. Plasmas 7 3681) which utilize a fully toroidal equilibrium are discussed.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Understanding the effect resonant magnetic perturbations have on ELMs
Authors:
A. Kirk,
I. T. Chapman,
T. E. Evans,
C. Ham,
J. R. Harrison,
G. Huijsmans,
Y. Liang,
Y. Q. Liu,
A. Loarte,
W. Suttrop,
A. J. Thornton
Abstract:
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller…
▽ More
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller ELMs (ELM mitigation) or ELM suppression. This technique of Resonant Magnetic Perturbations (RMPs) has been employed to suppress type I ELMs at high collisionality/density on DIII-D, ASDEX Upgrade, KSTAR and JET and at low collisionality on DIII-D. At ITER-like collisionality the RMPs enhance the transport of particles or energy and keep the edge pressure gradient below the 2D linear ideal MHD critical value that would trigger an ELM, whereas at high collisionality/density the type I ELMs are replaced by small type II ELMs. Although ELM suppression only occurs within limitied operational ranges, ELM mitigation is much more easily achieved. The exact parameters that determine the onset of ELM suppression are unknown but in all cases the magnetic perturbations produce 3D distortions to the plasma and enhanced particle transport. The incorporation of these 3D effects in codes will be essential in order to make quantitative predictions for future devices.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Towards understanding edge localised mode mitigation by resonant magnetic perturbations in MAST
Authors:
I. T. Chapman,
A. Kirk,
C. J. Ham,
J. R. Harrison,
Y. Q. Liu,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Becoulet,
F. Orain,
W. A. Cooper,
S. Pamela,
MAST Team
Abstract:
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a signifi…
▽ More
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a significant drop in the edge pressure gradient, which would be expected to stabilise the peeling-ballooning modes thought to be responsible for type-I ELMs. Various mechanisms which could cause a destabilisation of the peeling-ballooning modes are presented, including pedestal widening, plasma rotation braking, three dimensional corrugation of the plasma boundary and the existence of radially extended lobe structures near to the X-point. This leads to a model aimed at resolving the apparent dichotomy of ELM control, that is to say ELM suppression occurring due to the pedestal pressure reduction below the peeling-ballooning stability boundary, whilst the reduction in pressure can also lead to ELM mitigation, which is ostensibly a destabilisation of peeling-ballooning modes. In the case of ELM mitigation, the pedestal broadening, 3d corrugation or lobes near the X-point degrade ballooning stability so much that the pedestal recovers rapidly to cross the new stability boundary at lower pressure more frequently, whilst in the case of suppression, the plasma parameters are such that the particle transport reduces the edge pressure below the stability boundary which is only mildly affected by negligible rotation braking, small edge corrugation or short, broad lobe structures.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
-
Effect of kinetic resonances on the stability of Resistive Wall Mode in Reversed Field Pinch
Authors:
D. Yadykin,
Y. Q. Liu,
R. Paccagnella
Abstract:
The kinetic effects, due to the mode resonance with thermal particle drift motions in the reversed field pinch (RFP) plasmas, are numerically investigated for the stability of the resistive wall mode, using a non-perturbative MHD-kinetic hybrid formulation. The kinetic effects are generally found too weak to substantially change the mode growth rate, or the stability margin, re-enforcing the fact…
▽ More
The kinetic effects, due to the mode resonance with thermal particle drift motions in the reversed field pinch (RFP) plasmas, are numerically investigated for the stability of the resistive wall mode, using a non-perturbative MHD-kinetic hybrid formulation. The kinetic effects are generally found too weak to substantially change the mode growth rate, or the stability margin, re-enforcing the fact that the ideal MHD model is rather adequate for describing the RWM physics in RFP experiments.
△ Less
Submitted 11 April, 2011;
originally announced April 2011.
