-
Achieving High Yield of Perpendicular SOT-MTJ Manufactured on 300 mm Wafers
Authors:
Wenlong Yang,
Zhenghui Ji,
Yang Gao,
Kaiyuan Zhou,
Qijun Guo,
Dinggui Zeng,
Shasha Wang,
Ming Wang,
Lijie Shen,
Guilin Chen,
Yihui Sun,
Enlong Liu,
Shikun He
Abstract:
The large-scale fabrication of three-terminal magnetic tunnel junctions (MTJs) with high yield is becoming increasingly crucial, especially with the growing interest in spin-orbit torque (SOT) magnetic random access memory (MRAM) as the next generation of MRAM technology. To achieve high yield and consistent device performance in MTJs with perpendicular magnetic anisotropy, an integration flow has…
▽ More
The large-scale fabrication of three-terminal magnetic tunnel junctions (MTJs) with high yield is becoming increasingly crucial, especially with the growing interest in spin-orbit torque (SOT) magnetic random access memory (MRAM) as the next generation of MRAM technology. To achieve high yield and consistent device performance in MTJs with perpendicular magnetic anisotropy, an integration flow has been developed that incorporates special MTJ etching technique and other CMOS-compatible processes on a 300 mm wafer manufacturing platform. Systematic studies have been conducted on device performance and statistical uniformity, encompassing magnetic properties, electrical switching behavior, and reliability. Achievements include a switching current of 680 uA at 2 ns, a TMR as high as 119%, ultra-high endurance (over 1012 cycles), and excellent uniformity in the fabricated SOT-MTJ devices, with a yield of up to 99.6%. The proposed integration process, featuring high yield, is anticipated to streamline the mass production of SOT-MRAM.
△ Less
Submitted 13 April, 2024;
originally announced April 2024.
-
Compact Electrochromic Optical Recording of Bioelectric Potentials
Authors:
Kenneth Nakasone,
Chris Zavik,
Erica Liu,
Burhan Ahmed,
Dana Griffith,
Lothar Maisenbacher,
Ashwin Singh,
Yuecheng Zhou,
Bianxiao Cui,
Holger Müller
Abstract:
Electrochromic optical recording (ECORE) is a label-free method that utilizes electrochromism to optically detect electrical signals in biological cells with a high signal-to-noise ratio and is suitable for long-term recording. However, ECORE usually requires a large and intricate optical setup, making it relatively difficult to transport and to study specimens on a large scale. Here, we present a…
▽ More
Electrochromic optical recording (ECORE) is a label-free method that utilizes electrochromism to optically detect electrical signals in biological cells with a high signal-to-noise ratio and is suitable for long-term recording. However, ECORE usually requires a large and intricate optical setup, making it relatively difficult to transport and to study specimens on a large scale. Here, we present a compact ECORE apparatus that drastically reduces the spatial footprint and complexity of the ECORE setup whilst maintaining high sensitivity. An autobalancing differential photodetector automates common-mode noise rejection, removing the need for manually adjustable optics, and a compact laser module conserves space compared to a typical laser mount. The result is a simple, easy-to-use, and relatively low cost system that achieves a sensitivity of 16.7 μV (within a factor of 5 of the shot noise limit), and reliably detects action potentials from Human-induced pluripotent stem cell (HiPSC) derived cardiomyocytes. This setup can be further improved to within 1.5 dB of the shot noise limit by filtering out power-line interference.
△ Less
Submitted 26 November, 2023;
originally announced November 2023.
-
Non-volatile memory based on PZT/FeGa thin film memtranstor
Authors:
**-Cheng He,
Jian Xing,
Jian-Xin Shen,
Dan Su,
En-Ke Liu,
Shou-Guo Wang,
Young Sun
Abstract:
The PZT/FeGa thin film memtranstor was prepared and the modulation of the magnetoelectric coefficient by external magnetic and electric fields was studied. The magnetoelectric coefficient of the PZT/FeGa memtranstor can be reversed by flip** the direction of magnetization of FeGa or ferroelectric polarization of PZT. Notably, the sign of the magnetoelectric coefficient can be switched repeatedly…
▽ More
The PZT/FeGa thin film memtranstor was prepared and the modulation of the magnetoelectric coefficient by external magnetic and electric fields was studied. The magnetoelectric coefficient of the PZT/FeGa memtranstor can be reversed by flip** the direction of magnetization of FeGa or ferroelectric polarization of PZT. Notably, the sign of the magnetoelectric coefficient can be switched repeatedly by reversing ferroelectric polarization of PZT when the external magnetic field remains constant. Moreover, the binary switching behavior can still be maintained under zero DC bias magnetic field. When the polarization direction remains stable, the magnetoelectric coefficient also does not change. This means that the magnetoelectric coefficient of PZT/FeGa is non-volatile. Furthermore, the retention and endurance characteristics of the PZT/FeGa thin film memtranstor have been investigated. These findings demonstrate the potential of the PZT/FeGa thin film memtranstor for non-volatile memory applications.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Comparisons among the Performances of Randomized-framed Benchmarking Protocols under T1, T2 and Coherent Error Models
Authors:
Xudan Chai,
Yanwu Gu,
Weifeng Zhuang,
Peng Qian,
Xiao Xiao,
Dong E Liu
Abstract:
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocol…
▽ More
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocols through which one can assess the noise level of a quantum circuit that is designed for a quantum computing task. The existing methods that are mainly constructed based on a sequence of random circuits, such as randomized benchmarking (RB), have been commonly adopted as the conventional approach owning to its reasonable resource consumption and relatively acceptable reliability, compared with the average gate fidelity. To more deeply understand the performances of the above different randomized-framed benchmarking protocols, we design special random circuit sequences to test the performances of the three selected standard randomized-frame protocols under T1, T2, and coherent errors, which are regarded to be more practical for a superconductor quantum computer. The simulations indicate that MRB, DRB, and CRB sequentially overestimate the average error rate in the presence of T1 and T2 noise, compared with the conventional circuit's average error. Moreover, these methods exhibit almost the same level of sensitivity to the coherent error. Furthermore, the DRB loses its reliability when the strengths of T1 grow. More practically, the simulated conclusion is verified by running the designed tasks for three protocols on the Quafu quantum computation cloud platform. We find that MRB produces a more precise assessment of a quantum circuit conditioned on limited resources. However, the DRB provides a more stable estimation at a specific precision while a more resource-consuming.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
A generalized vector-field framework for mobility
Authors:
Erjian Liu,
Mattia Mazzoli,
Xiao-Yong Yan,
Jose J. Ramasco
Abstract:
Trip flow between areas is a fundamental metric for human mobility research. Given its identification with travel demand and its relevance for transportation and urban planning, many models have been developed for its estimation. These models focus on flow intensity, disregarding the information provided by the local mobility orientation. A field-theoretic approach can overcome this issue and hand…
▽ More
Trip flow between areas is a fundamental metric for human mobility research. Given its identification with travel demand and its relevance for transportation and urban planning, many models have been developed for its estimation. These models focus on flow intensity, disregarding the information provided by the local mobility orientation. A field-theoretic approach can overcome this issue and handling both intensity and direction at once. Here we propose a general vector-field representation starting from individuals' trajectories valid for any type of mobility. By introducing four models of spatial exploration, we show how individuals' elections determine the mesoscopic properties of the mobility field. Distance optimization in long displacements and random-like local exploration are necessary to reproduce empirical field features observed in Chinese logistic data and in New York City Foursquare check-ins. Our framework is an essential tool to capture hidden symmetries in mesoscopic urban mobility, it establishes a benchmark to test the validity of mobility models and opens the doors to the use of field theory in a wide spectrum of applications.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Hypernuclear event detection in the nuclear emulsion with Monte Carlo simulation and machine learning
Authors:
A. Kasagi,
W. Dou,
V. Drozd,
H. Ekawa,
S. Escrig,
Y. Gao,
Y. He,
E. Liu,
A. Muneem,
M. Nakagawa,
K. Nakazawa,
C. Rappold,
N. Saito,
T. R. Saito,
S. Sugimoto,
M. Taki,
Y. K. Tanaka,
A. Yanai,
J. Yoshida,
M. Yoshimoto,
H. Wang
Abstract:
This study developed a novel method for detecting hypernuclear events recorded in nuclear emulsion sheets using machine learning techniques. The artificial neural network-based object detection model was trained on surrogate images created through Monte Carlo simulations and image-style transformations using generative adversarial networks. The performance of the proposed model was evaluated using…
▽ More
This study developed a novel method for detecting hypernuclear events recorded in nuclear emulsion sheets using machine learning techniques. The artificial neural network-based object detection model was trained on surrogate images created through Monte Carlo simulations and image-style transformations using generative adversarial networks. The performance of the proposed model was evaluated using $α$-decay events obtained from the J-PARC E07 emulsion data. The model achieved approximately twice the detection efficiency of conventional image processing and reduced the time spent on manual visual inspection by approximately 1/17. The established method was successfully applied to the detection of hypernuclear events. This approach is a state-of-the-art tool for discovering rare events recorded in nuclear emulsion sheets without any real data for training.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
GBT20, a 20.48 Gbps PAM4 Optical Transmitter Module for Particle Physics Experiments
Authors:
B. Deng,
L. Zhang,
C. -P. Chao,
S. -W. Chen,
E. Cruda,
D. Gong,
S. Hou,
G. Huang,
X. Huang,
C. -Y. Li,
C. Liu,
T. Liu,
E. R. Liu,
Q. Sun,
X. Sun,
G. Wong,
J. Ye
Abstract:
We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The mi…
▽ More
We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The minimum module, including the host connector, occupies 41 mm x 13 mm x 6 mm. At 20.48 Gbps, the minimum Transmitter Dispersion Eye Closure Quaternary (TDECQ) is around 0.7 dB. The power consumption is around 164 mW in the low-power mode. The SEE cross-section is below 7.5x10^(-14) cm^2. No significant performance degrades after a TID of 5.4 kGy.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Structure and evolution of urban heavy truck mobility networks
Authors:
Yitao Yang,
Bin Jia,
Erjian Liu,
Xiao-Yong Yan,
Michiel de Bok,
Lóránt A. Tavasszy,
Ziyou Gao
Abstract:
Revealing the structural properties and understanding the evolutionary mechanisms of the urban heavy truck mobility network (UHTMN) provide insights in assessment of freight policies to manage and regulate the urban freight system, and are of vital importance for improving the livability and sustainability of cities. Although massive urban heavy truck mobility data become available in recent years…
▽ More
Revealing the structural properties and understanding the evolutionary mechanisms of the urban heavy truck mobility network (UHTMN) provide insights in assessment of freight policies to manage and regulate the urban freight system, and are of vital importance for improving the livability and sustainability of cities. Although massive urban heavy truck mobility data become available in recent years, in-depth studies on the structure and evolution of UHTMN are still lacking. Here we use massive urban heavy truck GPS data in China to construct the UHTMN and reveal its a wide range of structure properties. We further develop an evolving network model that simultaneously considers weight, space and system element duplication. Our model reproduces the observed structure properties of UHTMN and helps us understand its underlying evolutionary mechanisms. Our model also provides new perspectives for modeling the evolution of many other real-world networks, such as protein interaction networks, citation networks and air transportation networks.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Accelerating the Inference of the Exa.TrkX Pipeline
Authors:
Alina Lazar,
Xiangyang Ju,
Daniel Murnane,
Paolo Calafiura,
Steven Farrell,
Yaoyuan Xu,
Maria Spiropulu,
Jean-Roch Vlimant,
Giuseppe Cerati,
Lindsey Gray,
Thomas Klijnsma,
Jim Kowalkowski,
Markus Atkinson,
Mark Neubauer,
Gage DeZoort,
Savannah Thais,
Shih-Chieh Hsu,
Adam Aurisano,
V Hewes,
Alexandra Ballow,
Nirajan Acharya,
Chun-yi Wang,
Emma Liu,
Alberto Lucas
Abstract:
Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labelin…
▽ More
Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labeling. All steps were written in Python and run on both GPUs and CPUs. In this work, we accelerate the Python implementation of the pipeline through customized and commercial GPU-enabled software libraries, and develop a C++ implementation for inferencing the pipeline. The implementation features an improved, CUDA-enabled fixed-radius nearest neighbor search for graph building and a weakly connected component graph algorithm for track labeling. GNNs and other trained deep learning models are converted to ONNX and inferenced via the ONNX Runtime C++ API. The complete C++ implementation of the pipeline allows integration with existing tracking software. We report the memory usage and average event latency tracking performance of our implementation applied to the TrackML benchmark dataset.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments
Authors:
L. Zhang,
E. M. Cruda,
C-P. Chao,
S-W. Chen,
B. Deng,
R. Francisco,
D. Gong,
D. Guo,
S. Hou,
G. Huang,
X. Huang,
S. Kulis,
C-Y. Li,
C. Liu,
E. R. Liu,
T. Liu,
P. Moreira,
J. Prinzie,
H. Sun,
Q. Sun,
X. Sun,
G. Wong,
D. Yang,
J. Ye,
W. Zhang
Abstract:
We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Ve…
▽ More
We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Vertical-Cavity-Surface-Emitting-Laser (VCSEL). The input data channels, each at 1.28 Gbps, are scrambled with an internal 27-1 Pseudo-Random Binary Sequence (PRBS), which also serves as a frame aligner. GBS20 is tested to work at 10.24 and 20.48 Gbps with a VCSEL-based Transmitter-Optical-Subassembly (TOSA). The power consumption of GBS20 is below 238 mW and reduced to 164 mW in the low-power mode.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Impact of Fe$_{80}$B$_{20}$ insertion on the properties of dual-MgO perpendicular magnetic tunnel junctions
Authors:
Enlong Liu,
Taeyoung Lee,
Hyunsoo Yang
Abstract:
We explore the impact of Fe80B20 inserted at both Co$_{20}$Fe$_{80}$B$_{20}$/MgO interfaces of dual-MgO free layers (FLs) in bottom-pinned magnetic tunnel junctions (MTJs). MTJ stacks are annealed for 30 min at 350 $^\circ$C and 400 $^\circ$C in a vacuum after film deposition. Current-in-plane tunneling measurements are carried out to characterize magnetotransport properties of the MTJs. Conventio…
▽ More
We explore the impact of Fe80B20 inserted at both Co$_{20}$Fe$_{80}$B$_{20}$/MgO interfaces of dual-MgO free layers (FLs) in bottom-pinned magnetic tunnel junctions (MTJs). MTJ stacks are annealed for 30 min at 350 $^\circ$C and 400 $^\circ$C in a vacuum after film deposition. Current-in-plane tunneling measurements are carried out to characterize magnetotransport properties of the MTJs. Conventional magnetometry measurements and ferromagnetic resonance are conducted to estimate the saturation magnetization, the effective perpendicular anisotropy field and the Gilbert dam** of dual-MgO FLs as a function of the Fe$_{80}$B$_{20}$ thickness and annealing temperatures. With ultrathin Fe$_{80}$B$_{20}$ (0.2 - 0.4 nm) inserted, perpendicular magnetic anisotropy (PMA) of FLs increases with similar tunnel magneto-resistance (TMR) and low dam** values. As Fe$_{80}$B$_{20}$ layer thickness further increases (0.6 - 1.2 nm), both TMR and PMA degrade, and dam** increases dramatically. This study demonstrates a novel approach to tune properties of MTJ stacks with dual-MgO FLs up to 400 $^\circ$C annealing, which enables MTJ stacks for various applications.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
An interactive city choice model and its application for measuring the intercity interaction
Authors:
Xiang-Yu Jia,
Er-Jian Liu,
Chun-Yan Chen,
Xiao-Yong Yan
Abstract:
Measuring the interaction between cities is an important research topic in many disciplines, such as sociology, geography, economics and transportation science. The traditional and most widely used spatial interaction model is the gravity model, but it requires the parameters to be artificially set. In this paper, we propose a parameter-free interactive city choice (ICC) model that measures interc…
▽ More
Measuring the interaction between cities is an important research topic in many disciplines, such as sociology, geography, economics and transportation science. The traditional and most widely used spatial interaction model is the gravity model, but it requires the parameters to be artificially set. In this paper, we propose a parameter-free interactive city choice (ICC) model that measures intercity interaction from the perspective of individual choice behavior. The ICC model assumes that the probability of an individual choosing to interact with a city is proportional to the number of opportunities in the destination city and inversely proportional to the number of intervening opportunities between the origin city and the destination city, calculated using the travel time in the transportation network. The intercity interaction intensity can be obtained by calculating the product of this probability and the origin city's population. We apply the ICC model to measure the interaction intensity among 339 cities in China and analyze the impact of changes in the Chinese land transportation network from 2005 to 2018 on the intercity and city interaction intensity. Compared with the previously widely used spatial interaction models, the measurement results of the ICC model are more consistent with the actual situation.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
A universal opportunity model for human mobility
Authors:
Er-Jian Liu,
Xiao-Yong Yan
Abstract:
Predicting human mobility between locations has practical applications in transportation science, spatial economics, sociology and many other fields. For more than 100 years, many human mobility prediction models have been proposed, among which the gravity model analogous to Newton's law of gravitation is widely used. Another classical model is the intervening opportunity (IO) model, which indicat…
▽ More
Predicting human mobility between locations has practical applications in transportation science, spatial economics, sociology and many other fields. For more than 100 years, many human mobility prediction models have been proposed, among which the gravity model analogous to Newton's law of gravitation is widely used. Another classical model is the intervening opportunity (IO) model, which indicates that an individual selecting a destination is related to both the destination's opportunities and the intervening opportunities between the origin and the destination. The IO model established from the perspective of individual selection behavior has recently triggered the establishment of many new IO class models. Although these IO class models can achieve accurate prediction at specific spatiotemporal scales, an IO class model that can describe an individual's destination selection behavior at different spatiotemporal scales is still lacking. Here, we develop a universal opportunity model that considers two human behavioral tendencies: one is the exploratory tendency, and the other is the cautious tendency. Our model establishes a new framework in IO class models and covers the classical radiation model and opportunity priority selection model. Furthermore, we use various mobility data to demonstrate our model's predictive ability. The results show that our model can better predict human mobility than previous IO class models. Moreover, this model can help us better understand the underlying mechanism of the individual's destination selection behavior in different types of human mobility.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Observation of Magnetic Skyrmion Bubbles in a van der Waals ferromagnet Fe3GeTe2
Authors:
Bei Ding,
Zefang Li,
Guizhou Xu,
Hang Li,
Zhipeng Hou,
Enke Liu,
Xuekui Xi,
Feng Xu,
Yuan Yao,
Wenhong Wang
Abstract:
Two-dimensional (2D) van der Waals (vdW) magnetic materials have recently been introduced as a new horizon in materials science and enable the potential applications for next-generation spintronic devices. Here, in this communication, the observations of stable Bloch-type magnetic skyrmions in single crystals of 2D vdW Fe3GeTe2 (FGT) are reported by using in-situ Lorentz transmission electron micr…
▽ More
Two-dimensional (2D) van der Waals (vdW) magnetic materials have recently been introduced as a new horizon in materials science and enable the potential applications for next-generation spintronic devices. Here, in this communication, the observations of stable Bloch-type magnetic skyrmions in single crystals of 2D vdW Fe3GeTe2 (FGT) are reported by using in-situ Lorentz transmission electron microscopy (TEM). We find the ground-state magnetic stripe domains in FGT transform into skyrmion bubbles when an external magnetic field is applied perpendicularly to the (001) thin plate with temperatures below the Curie-temperature TC. Most interestingly, a hexagonal lattice of skyrmion bubbles is obtained via field cooling manipulation with magnetic field applied along the [001] direction. Owing to their topological stability, the skyrmion bubble lattices are stable to large field-cooling tilted angles and further reproduced by utilizing the micromagnetic simulations. These observations directly demonstrate that the 2D vdW FGT possesses a rich variety of topological spin textures, being of a great promise candidate for future applications in the field of spintronics.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
Frequency tunable topological edge states of two-dimensional honeycomb lattice photonic crystals
Authors:
Yuchen Peng,
Bei Yan,
Jianlan Xie,
Exian Liu,
Hang Li,
Rui Ge,
Feng Gao,
Jianjun Liu
Abstract:
In this paper, the photonic quantum spin Hall effect (PQSHE) is realized in dielectric two-dimensional (2D) honeycomb lattice photonic crystal (PC) by stretching and shrinking the honeycomb unit cell. Combining two honeycomb lattice PCs with a common photonic band gap (PBG) but different band topologies can generate a topologically protected edge state at the combined junction. The topological edg…
▽ More
In this paper, the photonic quantum spin Hall effect (PQSHE) is realized in dielectric two-dimensional (2D) honeycomb lattice photonic crystal (PC) by stretching and shrinking the honeycomb unit cell. Combining two honeycomb lattice PCs with a common photonic band gap (PBG) but different band topologies can generate a topologically protected edge state at the combined junction. The topological edge states and their unidirectional transmission as the scatterers with triangular, pentagonal, and heptagonal shapes are researched. Meanwhile, the unidirectional transmission in an inverted Ω-shaped waveguide with large bending angle is realized, and verifies the characteristics of the topological protection by adding different kind of defects. Moreover, the frequency varies significantly when changing the scatterers shape, which shows that the PC with various scatterers shape can tune the frequency range of the topological edge state significantly. In other words, it can adjust the frequency of unidirectional transmission and increase the adjustability of the topological edge state.
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
Manipulating Spin Chirality of Magnetic Skyrmion Bubbles by In-Plane Re-versed Magnetic Fields in (Mn$_{1-x}$Ni$_x$)$_{65}$Ga$_{35}$ ($x = 0.45$) magnet
Authors:
Bei Ding,
Jie Cui,
Guizhou Xu,
Zhipeng Hou,
Hang Li,
Enke Liu,
Guangheng Wu,
Yuan Yao,
Wenhong Wang
Abstract:
Understanding the dynamics of the magnetic skyrmion, a particle-like topologically stable spin texture, and its response dynamics to external fields are indis-pensable for the applications in spintronic devices. In this letter, the Lorentz transmis-sion electron microscopy (LTEM) was used to investigate the spin chirality of the mag-netic skyrmion bubbles (SKBs) in the centrosymmetric magnet MnNiG…
▽ More
Understanding the dynamics of the magnetic skyrmion, a particle-like topologically stable spin texture, and its response dynamics to external fields are indis-pensable for the applications in spintronic devices. In this letter, the Lorentz transmis-sion electron microscopy (LTEM) was used to investigate the spin chirality of the mag-netic skyrmion bubbles (SKBs) in the centrosymmetric magnet MnNiGa at room tem-perature. The reversal of SKBs excited by the in-plane magnetic field has been revealed. Moreover, the collective behavior of interacting spin chirality can be manipulated by reversing the directions of the magnetic fields on a wedge-shaped thin plate. The dy-namic behavior of the bubbles at different position of the thin plate has been explored with the micromagnetic simulation, indicating a non-uniform and nontrivial dynamic magnetization on the surfaces and center of the thin plate during the spin chirality re-versal. The results suggest that the controllable symmetry breaking of the SKBs arising from thickness variation provides an ability to manipulate the collective behavior of the spin chirality with small external fields, leading to a promising application in nonvola-tile spintronic devices for magnetic skyrmions.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Interface states in the rectangular lattice photonic crystals with identical dielectric rods
Authors:
Jianzhi Chen,
Jianlan Xie,
Exian Liu,
Bei Yan,
Jianjun Liu
Abstract:
Interface states in photonic crystals (PCs) have attracted attention for the special properties, such as high transmission efficiency in bend waveguides, and their generation related to the topological phase. Previous works on interface states in PCs were mainly based on the square lattice, the honeycomb lattice or the triangular lattice, but with different materials, shapes, or sizes of rods resu…
▽ More
Interface states in photonic crystals (PCs) have attracted attention for the special properties, such as high transmission efficiency in bend waveguides, and their generation related to the topological phase. Previous works on interface states in PCs were mainly based on the square lattice, the honeycomb lattice or the triangular lattice, but with different materials, shapes, or sizes of rods resulting in the complicated structure. In this paper, an interface is constructed by two 2D PCs with different rectangular lattices, but the same materials, shapes, and sizes of dielectric rods, which generates interface states. The interface states are analyzed with respect to Zak phases and surface impedances. The retainability of the interface states in rectangular lattice PCs is investigated by studying the relationship between the length-width ratio of the rectangular lattice and the Zak phase. It is found that, when the interface states are generated by changing the length-width ratio of the rectangular lattice, the retainability of the interface states is related to the positions of the photonic bandgaps or the Zak phases of the bands. A more detailed examination indicates that these conclusions are applicable to the rectangular lattice PCs with other materials, shapes, and sizes of dielectric rods. These results can lead to new ways to generate interface states easily, with only one kind of dielectric rod. In addition, these outcomes may contribute to the understanding of the relationship between the geometry and the interface state.
△ Less
Submitted 13 January, 2021; v1 submitted 3 November, 2019;
originally announced November 2019.
-
Average Transition Conditions for Electromagnetic Fields at a Metascreen of Nonzero Thickness
Authors:
Edward F. Kuester,
Enbo Liu
Abstract:
Using a dipole interaction model, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen consisting of an array of arbitrarily shaped apertures in a perfectly conducting screen of nonzero thickness. The simple analytical formulas obtained are validated through comparison with full-wave numerical simulations.
Using a dipole interaction model, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen consisting of an array of arbitrarily shaped apertures in a perfectly conducting screen of nonzero thickness. The simple analytical formulas obtained are validated through comparison with full-wave numerical simulations.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Average Transition Conditions for Electromagnetic Fields at a Metascreen of Vanishing Thickness
Authors:
Edward F. Kuester,
Enbo Liu,
Nick J. Krull
Abstract:
Using a dipole interaction model, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen consisting of an array of arbitrarily shaped apertures in a perfectly conducting screen of zero thickness. Use of the GSTCs permits modeling of structures containing perforated surfaces much more rapidly than is possible with full-wave numerical simu…
▽ More
Using a dipole interaction model, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen consisting of an array of arbitrarily shaped apertures in a perfectly conducting screen of zero thickness. Use of the GSTCs permits modeling of structures containing perforated surfaces much more rapidly than is possible with full-wave numerical simulations. These conditions require that the period of the array be smaller than about a third of a wavelength in the surrounding media, and generalize many results previously presented in the literature. They are validated by comparison with results of finite-element modeling, and show excellent agreement when conditions of their derivation are satisfied.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
SOT-MRAM 300mm integration for low power and ultrafast embedded memories
Authors:
K. Garello,
F. Yasin,
S. Couet,
L. Souriau,
J. Swerts,
S. Rao,
S. Van Beek,
W. Kim,
E. Liu,
S. Kundu,
D. Tsvetanova,
N. Jossart,
K. Croes,
E. Grimaldi,
M. Baumgartner,
D. Crotti,
A. Furnémont,
P. Gambardella,
G. S. Kar
Abstract:
We demonstrate for the first time full-scale integration of top-pinned perpendicular MTJ on 300 mm wafer using CMOS-compatible processes for spin-orbit torque (SOT)-MRAM architectures. We show that 62 nm devices with a W-based SOT underlayer have very large endurance (> 5x10^10), sub-ns switching time of 210 ps, and operate with power as low as 300 pJ.
We demonstrate for the first time full-scale integration of top-pinned perpendicular MTJ on 300 mm wafer using CMOS-compatible processes for spin-orbit torque (SOT)-MRAM architectures. We show that 62 nm devices with a W-based SOT underlayer have very large endurance (> 5x10^10), sub-ns switching time of 210 ps, and operate with power as low as 300 pJ.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
New parameter-free mobility model: Opportunity priority selection model
Authors:
Erjian Liu,
Xiao-Yong Yan
Abstract:
Predicting human mobility patterns has many practical applications in urban planning, traffic engineering, infectious disease epidemiology, emergency management and location-based services. Develo** a universal model capable of accurately predicting the mobility fluxes between locations is a fundamental and challenging problem in regional economics and transportation science. Here, we propose a…
▽ More
Predicting human mobility patterns has many practical applications in urban planning, traffic engineering, infectious disease epidemiology, emergency management and location-based services. Develo** a universal model capable of accurately predicting the mobility fluxes between locations is a fundamental and challenging problem in regional economics and transportation science. Here, we propose a new parameter-free model named opportunity priority selection model as an alternative in human mobility prediction. The basic assumption of the model is that an individual will select destination locations that present higher opportunity benefits than the location opportunities of the origin and the intervening opportunities between the origin and destination. We use real mobility data collected from a number of cities and countries to demonstrate the predictive ability of this simple model. The results show that the new model offers universal predictions of intracity and intercity mobility patterns that are consistent with real observations, thus suggesting that the proposed model better captures the mechanism underlying human mobility than previous models.
△ Less
Submitted 19 April, 2019; v1 submitted 20 August, 2018;
originally announced August 2018.
-
Cleavage Tendency of Anisotropic Two Dimensional Materials: ReX2 (X=S, Se) and WTe2
Authors:
Haifeng Wang,
Erfu Liu,
Yu Wang,
Bo Wan,
Ching-Hwa Ho,
F. Miao,
X. G. Wan
Abstract:
With unique distorted 1T structure and the associated in-plane anisotropic properties, mono- and few-layer ReX2 (X=S, Se) have recently attracted particular interest. Based on experiment and first-principles calculations, we investigate the fracture behavior of ReX2. We find that the cleaved edges of ReX2 flakes usually form an angle of ~120° or ~60°. In order to understand such phenomenon, we per…
▽ More
With unique distorted 1T structure and the associated in-plane anisotropic properties, mono- and few-layer ReX2 (X=S, Se) have recently attracted particular interest. Based on experiment and first-principles calculations, we investigate the fracture behavior of ReX2. We find that the cleaved edges of ReX2 flakes usually form an angle of ~120° or ~60°. In order to understand such phenomenon, we perform comprehensive investigations on the uniaxial tensile stress-strain relation of monolayer and multi-layer ReX2 sheets. Our numerical calculation shows that the particular cleaved edges of ReX2 flakes are caused by unique anisotropic ultimate tensile strengths and critical strains. We also calculate the stress-strain relation of WTe2, which explains why their cleaved edges are not corresponding to the principle axes. Our proposed mechanism about the fracture angle has also been supported by the calculated cleavage energies and surface energies for different edge surfaces.
△ Less
Submitted 14 September, 2017;
originally announced September 2017.
-
Iterative interferometry-based method for picking microseismic events
Authors:
Naveed Iqbal,
Abdullatif A. Al-Shuhail,
SanLinn I. Kaka,
Entao Liu,
Anupama Govinda Raj,
James H. McClellan
Abstract:
Continuous microseismic monitoring of hydraulic fracturing is commonly used in many engineering, environmental, mining, and petroleum applications. Microseismic signals recorded at the surface, suffer from excessive noise that complicates first-break picking and subsequent data processing and analysis. This study presents a new first-break picking algorithm that employs concepts from seismic inter…
▽ More
Continuous microseismic monitoring of hydraulic fracturing is commonly used in many engineering, environmental, mining, and petroleum applications. Microseismic signals recorded at the surface, suffer from excessive noise that complicates first-break picking and subsequent data processing and analysis. This study presents a new first-break picking algorithm that employs concepts from seismic interferometry and time-frequency (TF) analysis. The algorithm first uses a TF plot to manually pick a reference first-break and then iterates the steps of cross-correlation, alignment, and stacking to enhance the signal-to-noise ratio of the relative first breaks. The reference first-break is subsequently used to calculate final first breaks from the relative ones. Testing on synthetic and real data sets at high levels of additive noise shows that the algorithm enhances the first-break picking considerably. Furthermore, results show that only two iterations are needed to converge to the true first breaks. Indeed, iterating more can have detrimental effects on the algorithm due to increasing correlation of random noise.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Joint Seismic Data Denoising and Interpolation with Double-Sparsity Dictionary Learning
Authors:
Lingchen Zhu,
Entao Liu,
James H. McClellan
Abstract:
Seismic data quality is vital to geophysical applications, so methods of data recovery, including denoising and interpolation, are common initial steps in the seismic data processing flow. We present a method to perform simultaneous interpolation and denoising, which is based on double-sparsity dictionary learning. This extends previous work that was for denoising only. The original double sparsit…
▽ More
Seismic data quality is vital to geophysical applications, so methods of data recovery, including denoising and interpolation, are common initial steps in the seismic data processing flow. We present a method to perform simultaneous interpolation and denoising, which is based on double-sparsity dictionary learning. This extends previous work that was for denoising only. The original double sparsity dictionary learning algorithm is modified to track the traces with missing data by defining a masking operator that is integrated into the sparse representation of the dictionary. A weighted low-rank approximation algorithm is adopted to handle the dictionary updating as a sparse recovery optimization problem constrained by the masking operator. Compared to traditional sparse transforms with fixed dictionaries that lack the ability to adapt to complex data structures, the double-sparsity dictionary learning method learns the signal adaptively from selected patches of the corrupted seismic data while preserving compact forward and inverse transform operators. Numerical experiments on synthetic seismic data indicate that this new method preserves more subtle features in the dataset without introducing pseudo-Gibbs artifacts when compared to other directional multiscale transform methods such as curvelets.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
A multi-channel approach for automatic microseismic event association using RANSAC-based arrival time event clustering(RATEC)
Authors:
Lijun Zhu,
Lindsay Chuang,
James H. McClellan,
Entao Liu,
Zhigang Peng
Abstract:
In the presence of background noise, arrival times picked from a surface microseismic data set usually include a number of false picks that can lead to uncertainty in location estimation. To eliminate false picks and improve the accuracy of location estimates, we develop an association algorithm termed RANSAC-based Arrival Time Event Clustering (RATEC) that clusters picked arrival times into event…
▽ More
In the presence of background noise, arrival times picked from a surface microseismic data set usually include a number of false picks that can lead to uncertainty in location estimation. To eliminate false picks and improve the accuracy of location estimates, we develop an association algorithm termed RANSAC-based Arrival Time Event Clustering (RATEC) that clusters picked arrival times into event groups based on random sampling and fitting moveout curves that approximate hyperbolas. Arrival times far from the fitted hyperbolas are classified as false picks and removed from the data set prior to location estimation. Simulations of synthetic data for a 1-D linear array show that RATEC is robust under different noise conditions and generally applicable to various types of subsurface structures. By generalizing the underlying moveout model, RATEC is extended to the case of a 2-D surface monitoring array. The effectiveness of event location for the 2-D case is demonstrated using a data set collected by the 5200-element dense Long Beach array. The obtained results suggest that RATEC is effective in removing false picks and hence can be used for phase association before location estimates.
△ Less
Submitted 4 May, 2021; v1 submitted 6 February, 2017;
originally announced February 2017.
-
Microseismic events enhancement and detection in sensor arrays using autocorrelation based filtering
Authors:
Entao Liu,
Lijun Zhu,
Anupama Govinda Raj,
James H. McClellan,
Abdullatif Al-Shuhail,
SanLinn I. Kaka,
Naveed Iqbal
Abstract:
Passive microseismic data are commonly buried in noise, which presents a significant challenge for signal detection and recovery. For recordings from a surface sensor array where each trace contains a time-delayed arrival from the event, we propose an autocorrelation-based stacking method that designs a denoising filter from all the traces, as well as a multi-channel detection scheme. This approac…
▽ More
Passive microseismic data are commonly buried in noise, which presents a significant challenge for signal detection and recovery. For recordings from a surface sensor array where each trace contains a time-delayed arrival from the event, we propose an autocorrelation-based stacking method that designs a denoising filter from all the traces, as well as a multi-channel detection scheme. This approach circumvents the issue of time aligning the traces prior to stacking because every trace's autocorrelation is centered at zero in the lag domain. The effect of white noise is concentrated near zero lag, so the filter design requires a predictable adjustment of the zero-lag value. Truncation of the autocorrelation is employed to smooth the impulse response of the denoising filter. In order to extend the applicability of the algorithm, we also propose a noise prewhitening scheme that addresses cases with colored noise. The simplicity and robustness of this method are validated with synthetic and real seismic traces.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Sparse Multichannel Blind Deconvolution of Seismic Data via Spectral Projected-Gradient
Authors:
Naveed Iqbal,
Entao Liu,
James H. McClellan,
Abdullatif A. Al-Shuhail
Abstract:
In this work, an efficient numerical scheme is presented for seismic blind deconvolution in a multichannel scenario. The proposed method iterate with wo steps: first, wavelet estimation across all channels and second, refinement of the reflectivity estimate simultaneously in all channels using sparse deconvolution. The reflectivity update step is formulated as a basis pursuit denoising problem and…
▽ More
In this work, an efficient numerical scheme is presented for seismic blind deconvolution in a multichannel scenario. The proposed method iterate with wo steps: first, wavelet estimation across all channels and second, refinement of the reflectivity estimate simultaneously in all channels using sparse deconvolution. The reflectivity update step is formulated as a basis pursuit denoising problem and a sparse solution is obtained with the spectral projected-gradient algorithm - faithfulness to the recorded traces is constrained by the measured noise level. Wavelet re-estimation has a closed form solution when performed in the frequency domain by finding the minimum energy wavelet common to all channels. Nothing is assumed known about the wavelet apart from its time duration. In tests with both synthetic and real data, the method yields sparse reflectivity series and stable wavelet estimates results compared to existing methods with significantly less computational effort.
△ Less
Submitted 18 October, 2020; v1 submitted 11 November, 2016;
originally announced November 2016.
-
Sparse-promoting Full Waveform Inversion based on Online Orthonormal Dictionary Learning
Authors:
Lingchen Zhu,
Entao Liu,
James H. McClellan
Abstract:
Full waveform inversion (FWI) delivers high-resolution images of the subsurface by minimizing iteratively the misfit between the recorded and calculated seismic data. It has been attacked successfully with the Gauss-Newton method and sparsity promoting regularization based on fixed multiscale transforms that permit significant subsampling of the seismic data when the model perturbation at each FWI…
▽ More
Full waveform inversion (FWI) delivers high-resolution images of the subsurface by minimizing iteratively the misfit between the recorded and calculated seismic data. It has been attacked successfully with the Gauss-Newton method and sparsity promoting regularization based on fixed multiscale transforms that permit significant subsampling of the seismic data when the model perturbation at each FWI data-fitting iteration can be represented with sparse coefficients. Rather than using analytical transforms with predefined dictionaries to achieve sparse representation, we introduce an adaptive transform called the Sparse Orthonormal Transform (SOT) whose dictionary is learned from many small training patches taken from the model perturbations in previous iterations. The patch-based dictionary is constrained to be orthonormal and trained with an online approach to provide the best sparse representation of the complex features and variations of the entire model perturbation. The complexity of the training method is proportional to the cube of the number of samples in one small patch. By incorporating both compressive subsampling and the adaptive SOT-based representation into the Gauss-Newton least-squares problem for each FWI iteration, the model perturbation can be recovered after an l1-norm sparsity constraint is applied on the SOT coefficients. Numerical experiments on synthetic models demonstrate that the SOT-based sparsity promoting regularization can provide robust FWI results with reduced computation.
△ Less
Submitted 3 November, 2016; v1 submitted 16 November, 2015;
originally announced November 2015.
